Structural and functional characterization of kidney bean and field pea protein isolates: A comparative study

Techno-functional properties and allergenicity of mung bean (Vigna radiata) protein isolates from Imara and KPS2 varieties

Mung bean is an increasingly cultivated legume. This study compared mung bean varieties 'KPS2' from Thailand (Th) and 'Imara' from Tanzania (T) with a focus on protein composition, allergenicity, and techno-functional properties. Two rounds alkaline-acid extraction were performed to produce mung bean protein isolate (MBPI - Th1/T1 and Th2/T2), supernatant (S) and protein-poor residue (PPR). Mass spectrometric analysis revealed high abundance of 8 s-vicilin and 11 s-legumin in MBPI and S. Extraction removed considerable amounts of the seed albumin allergen but increased the relative abundance of cupins in MBPI. Higher vicilin levels were found in Th1 samples, contributed to increased protein solubility above pH 6.5. Th formed stronger gels which were more stable at higher frequencies. In contrast, T proteins were structurally more flexible, leading to its improved foaming ability. This study provides the knowledge and methods for appropriate selection of mung bean varieties for various food applications.

Sustainable proteins from wine industrial by-product: Ultrasound-assisted extraction, fractionation, and characterization

Plant proteins are increasingly being used in the food industry due to their sustainability. They can be isolated from food industry waste and converted into value-added ingredients, promoting a more circular economy. In this study, ultrasound-assisted alkaline extraction (UAAE) was optimized to maximize the extraction yield and purity of protein ingredients from grapeseeds. Grapeseed protein was extracted using UAAE under different pH (9-11), temperature (20-50 °C), sonication time (15-45 min), and solid/solvent ratio (10-20 mL/g) conditions. The structural and functional attributes of grapeseed protein and its major fractions (albumins and glutelins) were investigated and compared. The albumin fractions had higher solubilities, emulsifying properties, and in vitro digestibilities but lower fluid binding capacities and thermal stability than the UAAE and glutelin fraction. These findings have the potential to boost our understanding of the structural and functional characteristics of grapeseed proteins, thereby increasing their potential applications in the food and other industries.

Structure, functional and physicochemical properties of lotus seed protein under different pH environments

BACKGROUND

The present study investigated the structure, functional and physicochemical properties of lotus seed protein (LSP) under different pH environments. The structures of LSP were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Fourier transform infrared spectroscopy (FTIR), zeta potential, particle size distributions, free sulfhydryl and rheological properties. The functional and physicochemical properties of LSP were characterized by color, foaming property, emulsification property, solubility, oil holding capacity, water holding capacity, differential scanning calorimetry analysis and surface hydrophobicity.

RESULTS

LSP was mainly composed of eight subunits (18, 25, 31, 47, 51, 56, 65 and 151 kDa), in which the richest band was 25 kDa. FTIR results showed that LSP had high total contents of α-helix and β-sheet (44.81-46.85%) in acidic environments. Meanwhile, there was more β-structure and random structure in neutral and alkaline environments (pH 7.0 and 9.0). At pH 5.0, LSP had large particle size (1576.98 nm), high emulsion stability index (91.43 min), foaming stability (75.69%) and water holding capacity (2.21 g g-1), but low solubility (35.98%), free sulfhydryl content (1.95 μmol g-1) and surface hydrophobicity (780). DSC analysis showed the denaturation temperatures (82.23 °C) of LSP at pH 5.0 was higher than those (80.10, 80.52 and 71.82 °C) at pH 3.0, 7.0 and 9.0. The analysis of rheological properties showed that LSP gel had high stability and great strength in an alkaline environment.

CONCLUSION

The findings of the present study are anticipated to serve as a valuable reference for the implementation of LSP in the food industry. © 2024 Society of Chemical Industry.

Effect of exogenous selenium on physicochemical, structural, functional, thermal, and gel rheological properties of mung bean (Vigna radiate L.) protein

Selenium (Se) biofortification during the growth process of mung bean is an effective method to improve the Se content and quality. However, the effect of Se biofortification on the physicochemical properties of mung bean protein is unclear. The objective of this study was to clarify the changes in the composition, Se forms, particle structure, functional properties, thermal stability, and gel properties of mung bean protein at four Se application levels. The results showed that the Se content of mung bean protein increased in a dose-dependent manner, with 7.96-fold (P1) and 8.52-fold (P2) enhancement at the highest concentration. Exogenous Se application promotes the conversion of inorganic Se to organic Se. Among them, selenomethionine (SeMet) and methyl selenocysteine (MeSeCys) replaced Met and Cys through the S metabolic pathway and became the dominant organic Se forms in Se-enriched mung bean protein, accounting for more than 80 % of the total Se content. Exogenous Se at 30 g/hm2 significantly up-regulated protein content and promoted the synthesis of sulfur-containing protein components and hydrophobic amino acids in the presence of increased levels of SeMet and MeSeCys. Meanwhile, Cys and Met substitution altered the sulfhydryl groups (SH), β-sheets, and β-turns of protein. The particle size and microstructural characteristics depend on the protein itself and were not affected by exogenous Se. The Se-induced increase in the content of hydrophobic amino acids and β-sheets synergistically increases the thermal stability of the protein. Moderate Se application altered the functional properties of mung bean protein, which was mainly reflected in the significant increase in oil holding capacity (OHC) and foaming capacity (FC). In addition, the increase in SH and β-sheets induced by exogenous Se could alter the protein intermolecular network, contributing to the increase in storage modulus (G') and loss modulus (G″), which resulted in the formation of more highly elastic gels. This study further promotes the application of mung bean protein in the field of food processing and provides a theoretical basis for the extensive development of Se-enriched mung bean protein.

Modification of casein with oligosaccharides via the Maillard reaction: As natural emulsifiers

In the present study, different oligosaccharides (fructooligosaccharide (FOS), galactooligosaccharide (GOS), isomaltooligosaccharide (IMO), and xylooligosaccharide (XOS)) were modified on casein (CN) via Maillard reaction. The CN-oligosaccharide conjugates were evaluated for modifications to functional groups, fluorescence intensity, water- and oil-holding properties, emulsion foaming properties, as well as general emulsion properties and stability. The results demonstrated that the covalent combination of CN and oligosaccharides augmented the spatial repulsion and altered the hydrophobic milieu of proteins, which resulted in a diminution in water-holding capacity, an augmentation in oil-holding capacity, and an enhancement in the emulsification properties of proteins. Among them, CN-XOS exhibited the most pronounced changes, with the emulsification activity index and emulsion stability index increasing by approximately 72% and 84.3%, respectively. Furthermore, CN-XOS emulsions have smaller droplet sizes and higher absolute potential values than CN emulsions. Additionally, CN-XOS emulsions demonstrate remarkable stability when ion concentration and pH are varied. These findings indicate that oligosaccharides modified via Maillard reaction can be used as good natural emulsifiers. This provides a theoretical basis for using oligosaccharides to modify proteins and act as natural emulsifiers.

Characterization of structural and functional properties of soybean 11S globulin during renaturation after denaturation induced by changes in pH

BACKGROUND

This study explored the denaturation of 11S globulin, a protein known for its diverse functional properties in soy protein applications, at pH 3.0 and pH 10.0, followed by a gradual return to pH 7.0 to facilitate renaturation. It investigated the structural and functional changes during renaturation induced by a change in pH, revealing the stabilization mechanism of 11S globulin.

RESULTS

The findings revealed that during pH adjustment to neutral, the denatured soybean 11S globulin - resulting from alkaline (pH 10.0) or acidic (pH 3.0) treatments - experienced a refolding of its extended tertiary structure to varying extents. The particle size and the proportions of α-helix and β-sheet in the secondary structure aligned progressively with those of the natural-state protein. However, for the alkali-denatured 11S, the β-sheet content decreased upon adjustment to neutral, whereas an increase was observed for the acid-denatured 11S. In terms of functional properties, after alkaline denaturation, the foaming capacity (FC) and emulsifying activity index (EAI) of 11S increased by 1.4 and 1.2 times, respectively, in comparison with its native state. The solubility, foamability, and emulsifiability of the alkali-denatured 11S gradually diminished during renaturation but remained superior to those of the native state. Conversely, these properties showed an initial decline, followed by an increase during renaturation triggered by pH neutralization.

CONCLUSIONS

This research contributes to the enhancement of protein functionality, offering a theoretical foundation for the development of functional soy protein products and expanding their potential applications. © 2024 Society of Chemical Industry.

Processing parameters, techno-functional properties and potential food application of lentil protein concentrate as an ingredient for the plant-based market

Lentil (Lens culinaris) is a protein-rich legume consumed worldwide and it also has the potential to become an alternative source of protein ingredient for human nutrition. The aim of this study was to determine the best processing parameters for the whole grain protein wet extraction, as well as to analyze the techno-functional properties, and physical characteristics of the protein concentrate and its flour. It was also evaluated the application of the concentrate into a fish-like croquette. The processing route was carried out by alkaline extraction and acid precipitation of the proteins where the pH, stirring time and solute:solvent ratio were evaluated. The final dried protein concentrate presented 85% protein on dry basis and a mass yield of 14%. The results were reproducible when tested on a first scaling up test. For the techno-functional properties, solubility, water and oil retention capacities, emulsification and foaming capacities and stability, and gelling capacity were tested. As for the food application into fish-like croquettes, the lentil protein showed similar scores for sensory acceptance, flavor and texture when compared to a commercial clean-taste concentrate. The results observed in this study were compatible to other alternative pulse-protein ingredients on the market, positioning lentil protein as a promising alternative protein source to produce ingredients for the plant-based market.

Upcycling soybean meal through enzymatic conversion of insoluble fiber into soluble dietary fiber enhanced by ball milling

Insoluble dietary fiber (IDF) in soybean meal, due to the insolubility, is one of the major impediments to upcycle the soybean meal for its value-added use. This study converted IDF to soluble dietary fiber (SDF) using ball milling and enzymatic hydrolysis of the IDF. The impact of ball milling and enzymatic hydrolysis on the physicochemical and functional properties of SDF was evaluated. Cellulase, hemicellulase, xylanase, galacturonase, and arabinofuranosidase were employed for hydrolyzing IDF. The results showed that ball milling significantly reduced the particle size of IDF, facilitating enhanced enzymatic hydrolysis and resulting in SDF with lower molecular weight and varied monosaccharide composition. The synergistic effect of ball milling and enzymatic processes with combination of cellulase-xylanase-galacturonase was evident by the improved conversion rates (69.8%) and altered weight-averaged molecular weight (<5900 Da) of the resulting SDF. Rheological and microstructural analyses of the SDF gel indicated that specific enzyme combinations led to SDF gels with distinct viscoelastic properties, pore sizes, and functional capabilities, suitable for varied applications in the food and pharmaceutical sectors. This comprehensive evaluation demonstrates the potential of optimized physical bioprocessing techniques in developing functional ingredients with tailored properties for industrial use.

Effect of succinylation-assisted glycosylation on the structural characteristics, emulsifying, and gel properties of walnut glutenin

In this study, we examined the effects of various sodium alginate (ALG) concentrations (0.2%-0.8%) on the functional and physicochemical characteristics of succinylated walnut glutenin (GLU-SA). The results showed that acylation decreased the particle size and zeta potential of walnut glutenin (GLU) by 122- and 0.27-fold, respectively. In addition, the protein structure unfolded, providing conditions for glycosylation. After GLU-SA was combined with ALG, the surface hydrophobicity decreased and the net negative charge and disulfide bond content increased. The protein structure was analyzed by FTIR, Endogenous fluorescence spectroscopy, and SEM, and ALG prompted GLU-SA cross-linking to form a stable three-dimensional network structure. The results indicated that dual modification improved the functional properties of the complex, especially its potential protein gel and emulsifying properties. This research provide theoretical support and a technical reference for expanding the application of GLU in the processing of protein and oil products.

Solubility, (micro)structure, and in vitro digestion of pea protein dispersions as affected by high pressure homogenization and environmental conditions

In this work, dispersions were prepared with commercial pea protein isolate (PPI) and subjected to different (i) high pressure homogenization (HPH) intensities (0 - 200 MPa) (room temperature, pH 7) or (ii) environmental conditions (60 °C, pH 7 or pH 12) to generate dispersions with distinct protein molecular and microstructural characteristics, impacting protein solubility. Besides, protein digestion was analyzed following the static INFOGEST in vitro digestion protocol. Generally, increasing pressure of the homogenization treatment was linked with decreasing particle sizes and enhanced protein digestion. More specifically, the dispersion that did not undergo HPH (0 MPa) as well as the dispersion treated at 60 °C, pH 7, had highly similar microstructures, consisting of large irregular particles (10 - 500 µm) with shell-like structures, and exhibited low solubility (around 15 % and 28 %, respectively), which resulted in limited proteolysis (35 % and 42 %, respectively). In contrast, the dispersion subjected to HPH at 100 MPa and the dispersion treated at 60 °C, pH 12 also had similar microstructures with small and homogeneous particles (<1 µm), and exhibited relatively good solubility (54 % and 31 %, respectively), which led to enhanced protein digestion levels (87 % and 74 %, respectively). This study highlights the potential of food processing on macronutrient (micro)structure and further gastrointestinal stability and functionality.

A stable delivery system for curcumin: Fabrication and characterization of self-assembling acylated kidney bean protein isolate nanogels

The construction of protein-based nano-gels as curcumin delivery system effectively enhances the stability and bioavailability of curcumin. In this study, acylation modification and self-assembly techniques were jointly employed to construct acylated kidney bean protein isolate (AKBPI)-nanogels. Optimal conditions for AKBPI-nanogels were determined to be pH 7, concentration of 2 mg/mL, and temperature at 90℃ for 30 min. The optimized AKBPI-nanogels exhibited excellent uniformity as evidenced by decreasing average particle size (137.35 nm) and polydispersity index (0.38). Acylation enhanced the intermolecular interactions within the nanogel by reducing the polarity of tyrosine microenvironment and free sulfhydryl groups. AKBPI-nanogels demonstrated remarkable characteristics in terms of pH sensitivity, salt concentration, and storage tolerance. The curcumin-loaded AKBPI-nanogels exhibited an encapsulation efficiency of 92.30 % and maintained high antioxidant activity. In simulated gastrointestinal digestion, AKBPI-nanogels facilitated the controlled release and higher bioavailability of curcumin. Therefore, AKBPI-nanogels can be a stable tool for delivering curcumin.

A comparative evaluation of the structure, functionality and volatile profiles of Trichosanthes kirilowii seed protein isolates based on different extraction methods

In the present study, we hypothesised that Trichosanthes kirilowii seed protein isolate (TPI) obtained by different extraction methods have distinct structure, functional attributes and volatile profiles. Alkaline-extracted isolate (AE-TPI) exhibited lower protein content and a darker colour than the other two isolates because more polyphenols and pigments were coextracted. Salt-extracted isolate (SE-TPI) and AE-TPI had higher in vitro protein digestibility than reverse micelle-extracted isolate (RME-TPI) due to higher degrees of denaturation, which enabled them to be more susceptible to proteolysis. The SE-TPI gel resulted in a stronger gel network and greater hardness than the other two isolate gels. In the volatile profile, SE-TPI (22) yielded the largest number of volatile compounds, followed by AE-TPI (20) and RME-TPI (15). The current results indicated that the structure, functional properties and volatile profiles of TPI are largely influenced by the extraction technique.

Optimization of extraction parameters of protein isolate from milk thistle seed: Physicochemical and functional characteristics

In the current study, optimization of milk thistle protein extraction parameters was carried out in terms of purity and yield. In addition, the characterization of proteins isolated from milk thistle seeds was conducted. The optimal conditions for achieving the highest purity of protein (MTP) from milk thistle seeds were identified as extraction pH 9.47, temperature 30°C, and extraction time 180 min. Conversely, optimal values for overall protein yield (MTY) were determined at extraction pH 12, temperature 50°C, and extraction time 167 min. The proteins obtained under these two sets of conditions (MTP and MTY) demonstrated comparable oil absorption capacity (OAC), foaming, and emulsifying capabilities, as well as stability, aligning with findings from previous studies on seed protein. Both proteins had the highest protein solubilities at pH 11. Both proteins' zeta potentials were closest to zero at pH 4, demonstrating their closeness to the isoelectric point. MTP and MTY had poorer antioxidant capabilities than the other protein isolates/concentrates. MTP and MTY contain high β sheet concentrations that might enhance thermal stability and lower the digestibility of proteins. In conclusion, the protein extraction process demonstrated a high potential for achieving both substantial yield and remarkable purity with some decent technological and functional properties, thus holding promise for various applications in diverse fields.

Enhancing the stability of mung bean-based milk: Insights from protein characteristics and raw material selection

Plant-based milk (PBM) alternatives are gaining popularity worldwide as the change of consumers' nutritional habits and health attitudes. Mung beans, recognized for their nutritional value, have gained attention as potential ingredients for PBM. Nevertheless, mung bean-based milk (MBM) faces instability issues common to other plant-based milks. This study investigated the factors influencing MBM stability focusing on raw materials. We selected 6 out of 20 varieties based on their MBM centrifugation sedimentation rates, representing both stable and unstable MBM. Stable MBM exhibited distinct advantages, including reduced separation rate, smaller particle size, lower viscosity, fewer protein aggregates, higher soluble protein content, and increased consumer acceptance. Major nutritional components such as protein, starch, and lipids were not significant different between stable and unstable MBM varieties. The pivotal distinction may lay in the protein properties and composition. Stable MBM varieties exhibited significantly improved protein solubility and emulsion stability, along with elevated concentrations of legume-like acidic subunits, basic 7S proteins, and 28 kDa and 26 kDa vicilin-like subunits. The increasement of these proteins likely contributed to the improvement in protein characteristics that affect MBM stability. These findings offer valuable insights for raw material selection and guidance for future mung bean breeding to enhance mung bean milk production.

Supercritical CO2 Treatment to Modify Techno-Functional Properties of Proteins Extracted from Tomato Seeds

Tomato seeds are a rich source of protein that can be utilized for various industrial food purposes. This study delves into the effects of using supercritical CO2 (scCO2) on the structure and techno-functional properties of proteins extracted from defatted tomato seeds. The defatted meal was obtained using hexane (TSMH) and scCO2 (TSMC), and proteins were extracted using water (PEWH and PEWC) and saline solution (PESH and PESC). The results showed that scCO2 treatment significantly improved the techno-functional properties of protein extracts, such as oil-holding capacity and foaming capacity (especially for PEWC). Moreover, emulsifying capacity and stability were enhanced for PEWC and PESC, ranging between 4.8 and 46.7% and 11.3 and 96.3%, respectively. This was made possible by the changes in helix structure content induced by scCO2 treatment, which increased for PEWC (5.2%) and decreased for PESC (8.0%). Additionally, 2D electrophoresis revealed that scCO2 hydrolyzed alkaline proteins in the extracts. These findings demonstrate the potential of scCO2 treatment in producing modified proteins for food applications.

Effects of nitrogen fertilizer on the physicochemical, structural, functional, thermal, and rheological properties of mung bean (Vigna radiata) protein

Nitrogen fertilizer can affect the seed quality of mung bean. However, the effects of nitrogen fertilizer on the properties of mung bean protein (MBP) remain unclear. We investigated the effects of four nitrogen fertilization levels on the physicochemical, structural, functional, thermal, and rheological properties of MBP. The results showed that the amino acid and protein contents of mung bean flour were maximized under 90 kg ha-1 of applied nitrogen treatment. Nitrogen fertilization can alter the secondary and tertiary structure of MBP. The main manifestations are an increase in the proportion of β-sheet, the exposure of more chromophores and hydrophobic groups, and the formation of loose porous aggregates. These changes improved the solubility, oil absorption capacity, emulsion activity, and foaming stability of MBP. Meanwhile, Thermodynamic and rheological analyses showed that the thermal stability, apparent viscosity, and gel elasticity of MBP were all increased under nitrogen fertilizer treatment. Correlation analysis showed that protein properties are closely related to changes in structure. In conclusion, nitrogen fertilization can improve the protein properties of MBP by modulating the structure of protein molecules. This study provides a theoretical basis for the optimization of mung bean cultivation and the further development of high-quality mung bean protein foods.

Effect of high moisture extrusion on the structure and physicochemical properties of Tartary buckwheat protein and its in vitro digestion

Tartary buckwheat is rich in nutrients and its protein supports numerous biological functions. However, the digestibility of Tartary buckwheat protein (TBP) poses a significant limitation owing to its inherent structure. This study aimed to assess the impact of high moisture extrusion (HME, 60 % moisture content) on the structural and physicochemical attributes, as well as the in vitro digestibility of TBP. Our results indicated that TBP exhibited unfolded and amorphous microstructures after HME. The protein molecular weight of TBP decreased after HME, and a greater degradation was observed at 70 °C than 100 °C. In particular, HME at 70 °C caused an almost complete disappearance of bands near 35 kDa compared with HME at 100 °C. In addition, compared with native TBP (NTBP, 44.53 µmol/g protein), TBP subjected to HME at 70 °C showed a lower disulfide bond (SS) content (42.67 µmol/g protein), whereas TBP subjected to HME at 100 °C demonstrated a higher SS content (45.70 µmol/g protein). These changes endowed TBP with good solubility (from 55.96 % to 83.31 % at pH 7), foaming ability (20.00 %-28.57 %), and surface hydrophobicity (8.34-23.07). Furthermore, the emulsifying activity (EA) and in vitro digestibility are closely related to SS content. Notably, extruded TBP (ETBP) obtained at 70 °C exhibited higher EA and digestibility than NTBP, whereas ETBP obtained at 100 °C showed the opposite trend. Consequently, HME (especially at 70 °C) demonstrated significant potential as a processing technique for improving the functional and digestive properties of TBP.

Physicochemical, structural, and functional characterization of guar meal protein isolate (Cyamopsis tetragonoloba)

Guar korma and churi protein isolates were assessed for their physicochemical, nutritional, functional, structural, and digestibility properties for their application in the food industry. The water extracted protein isolate of guar korma showed a protein content of 89.7 % and a yield of 48.7 %. Water extracted protein isolate of guar korma showed an excellent protein efficiency ratio, essential amino acid/total amino acids (34.35 %), amino acid score, and protein digestibility corrected amino acid score values, suggesting the existence of high-quality proteins. Water extracted protein isolate of guar korma contains all the essential amino acids except Methionine and Cysteine, according to World Health Organization recommendations for children and adults. The protein profiling of water extracted protein isolate of guar korma was analyzed using 12 % sodium dodecyl sulfate polyacrylamide gel electrophoresis and indicated the presence of eight major protein bands in the range of 17-100 kDa. In vitro digestibility of water extracted protein isolate of guar korma showed the complete digestion of the abundant protein bands within 15 min. Further, the foaming capacity, water/oil holding capacity, and emulsifying stability of water extracted protein isolate of guar korma were comparable with soy protein isolate. Fourier Transform Infrared and Circular Dichroism spectral analysis revealed the presence of several aromatic groups and β-sheets, random coils respectively in water extracted protein isolate of guar korma. The morphological nature of the guar protein isolate was characterized by Scanning Electron Microscopy. Overall, these findings support that water extracted protein isolate of guar korma has excellent functional and nutritional properties and could be a potential alternative plant protein in food industries.

Multifunctional apple seed protein hydrolysates: Impact of enzymolysis on the biochemical, techno-functional and in vitro α-glucosidase, pancreatic lipase and angiotensin-converting enzyme inhibition activities

The work was designed to assess the amelioration effect of papain hydrolysis on the biochemical, techno-functional, and biological properties of apple seed protein isolate (API) after 0-90 min of hydrolysis. Hydrolysis significantly enhanced the nutritional value (protein content ˃ 90 %) while decreasing the average particle size. With increasing hydrolysis time, FTIR analysis revealed a transition from α-helix to β-turn structure, indicating the unfolding of protein structure. This structural alteration positively influenced the functional characteristics, with samples hydrolyzed for 90 min exhibiting excellent solubility, higher water and oil absorption capacity, foaming capacity, and increased emulsifying activity index. Moreover, samples hydrolyzed for 90 min displayed the highest α-glucosidase (29.62-57.43 %), pancreatic lipase inhibition (12.87-31.08 %), and ACE inhibition (25.32-62.70 %) activity. Interestingly, the inhibiting ability of protein hydrolysates against α-glucosidase and ACE was more effective than pancreatic lipase, suggesting their usefulness as a functional ingredient, particularly in type II diabetes and hypertension management.

Effect of ultrasonic frequency on the structural and functional properties of pea protein isolation

BACKGROUND

Pea protein, as a by-product of peas (Pisum sativum L.), is rich in a variety of essential amino acids that can meet the body's protein needs and is a valuable source of protein. Since the function of pea protein is closely related to its structure, pea protein has been subjected to different modifications in recent years to improve its application in food and to develop new products.

RESULTS

The effects of sonication frequency (primary and secondary time) on pea protein isolate's (PPI's) structural and functional properties were investigated. Sodium dodecyl sulfate polyacrylamide gel electrophoresis demonstrated that different sonication frequencies at the same power (600 W) treatment had no effect on PPI's molecular weight. Fourier-transform infrared spectroscopy revealed that treatment at different sonication frequencies caused secondary structural changes in PPI. The particle size distribution, foaming, stability, surface hydrophobicity, emulsification, and oxidation resistance of PPI were improved after primary and secondary sonication, but secondary sonication was not more effective than primary sonication for an extended period of time.

CONCLUSION

Overall, ultrasound is able to improve the structural and functional properties of pea proteins within a suitable range. It provides a theoretical basis for elucidating the modification of the structure and function of plant proteins by ultrasound and lays the foundation for the development of plant proteins in food applications as well as development. © 2023 Society of Chemical Industry.

Lima bean (Phaseolus lunatus Linn.) protein isolate as a promising plant protein mixed with xanthan gum for stabilizing oil-in-water emulsions

BACKGROUND

Lima bean protein isolate (LPI) is an underutilized plant protein. Similar to other plant proteins, it may display poor emulsification properties. In order to improve its emulsifying properties, one effective approach is using protein and polysaccharide mixtures. This work investigated the structural and emulsifying properties of LPI as well as the development of an LPI/xanthan gum (XG)-stabilized oil-in-water emulsion.

RESULTS

The highest protein solubility (84.14%) of LPI was observed and the molecular weights (Mw ) of most LPI subunits were less than 35 kDa. The enhanced emulsifying activity index (15.97 m2  g-1 ) of LPI might be associated with its relatively high protein solubility and more low-Mw subunits (Mw  < 35 kDa). The effects of oil volume fraction (ϕ) on droplet size, microstructure, rheological behavior and stability of emulsions were investigated. As ϕ increased from 0.2 to 0.8, the emulsion was arranged from spherical and dispersed oil droplets to polyhedral packing of oil droplets adjacent to each other, while the LPI/XG mixtures changed from particles (in the uncrowded interfacial layer) to lamellae (in the crowded interfacial layer). When ϕ was 0.6, the emulsion was in a transitional state with the coexistence of particles and lamellar structures on the oil droplet surface. The LPI/XG-stabilized emulsions with ϕ values of 0.6-0.8 showed the highest stability during a 14-day storage period.

CONCLUSION

This study developed a promising plant-based protein resource, LPI, and demonstrates potential application of LPI/XG as an emulsifying stabilizer in foods. © 2023 Society of Chemical Industry.

Olive leaf protein: Extraction optimization, in vitro digestibility, structural and techno-functional properties

Olive leaf, as an important by-product of olive farming, is generated from the pruning and harvesting of olive trees and represents >10 % of the total olive weight. The present study was conducted to evaluate the composition, functional and structural characterizations, as well as the in vitro digestibility of olive leaf proteins isolated from ultrasonic-assisted extraction, comparing to classical and industrial techniques. The ultrasound-assisted extraction of olive leaf protein was optimized by the simultaneous maximization of the yield and purity of protein using a Box-Behnken design (BBD) of response surface methodology (RSM). The results indicated that the optimal extraction conditions were as follows: pH of 10.99, temperature of 40.48 °C, sonication time of 47.25 min, and solvent/solid ratio of 24.08 mL/g. Under these conditions, the extraction yield and protein content were 11.67 and 51.2 %, respectively, which were significantly higher than those obtained by the conventional techniques. Regarding the functionality of protein, extraction technique had significant impacts on the structural and functional properties of proteins. In general, ultrasound assisted extraction had higher solubility, and better foaming and thermal properties and in vitro digestibility but lower emulsifying stability and fluid binding capacity compared to conventional ones. Ultrasound-assisted alkaline extraction has great potential to produce edible olive leaf protein with modified functional properties that can be used for various aims in the food applications.

Translucency mechanism of heat-induced pigeon egg white gel

In this study, the properties of pigeon egg white (PEW) and chicken egg white (CEW) thermal gels were compared, with the aim of revealing the mechanisms involved in the high transparency of PEW thermal gels. Results demonstrated that PEW gels exhibited higher transparency than CEW gels. Scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis revealed that PEW gels formed a fine chain gel network structure with an average diameter of thermal aggregates (89.84 ± 7.13 nm). The molecular properties of PEW proteins, such as higher content of β-sheet structures (32.73 %), reactive groups (free sulfhydryl groups, hydrophobic groups), and absolute zeta potential (-3.563 mV), were found to contribute to the formation of smaller thermal aggregates during thermal denaturation. The microrheology measurements showed that these features allowed PEW proteins to interact less with each other and form smaller thermal aggregates during thermal denaturation, which facilitated the formation of fine chain gel networks and thus improved the transparency of the gels. The present study initially reveals the molecular basis of the high transparency of PEW thermal gels and provides a theoretical reference for the development of new highly transparent protein materials.

Nitrogen regulates the synthesis of hydrophobic amino acids to improve protein structural and gel properties in common buckwheat

Nitrogen (N) fertilizer impacts the grain quality of common buckwheat, but the effects and regulatory mechanisms of N on various protein parameters of buckwheat are not fully understood. The purpose of this study was to investigate the particle morphology, structural and gel properties, and regulation mechanism of buckwheat protein under four N levels. The bulk density, surface hydrophobicity, particle size, and thermal properties of the buckwheat protein were maximized through the optimal N application (180 kg N/ha), further enhancing the thermal stability of the protein. N application increased the β-sheet content and reduced the random coil content. Appropriate N fertilizer input enhanced the tertiary structure stability and gel elasticity of buckwheat protein by promoting hydrophobic interactions, disulfide bonds, ionic bonds, storage modulus and loss modulus. The differentially expressed proteins induced by N are primarily enriched in small ribosomal subunit and ribosome, improving protein quality mainly by promoting the synthesis of hydrophobic amino acids. Future agriculture should pay attention to the hydrophobic amino acid content of buckwheat to effectively improve protein quality. This study further advances the application of buckwheat protein in the field of food processing and provides a theoretical basis for the extensive development and utilization of buckwheat protein.

Characterization of Proteins Extracted from Ulva sp., Padina sp., and Laurencia sp. Macroalgae Using Green Technology: Effect of In Vitro Digestion on Antioxidant and ACE-I Inhibitory Activity

Macroalgal proteins were extracted from Ulva rigida (URPE) (green), Padina pavonica (PPPE) (brown), and Laurencia obtusa (LOPE) (red) using ultrasound-assisted enzymatic extraction, which is one of the green extraction technologies. Techno-functional, characteristic, and digestibility properties, and biological activities including antioxidant (AOA) and angiotensin-I converting enzyme (ACE-I) inhibitory activities were also investigated. According to the results, the extraction yield (EY) (94.74%) was detected in the extraction of L. obtusa, followed by U. rigida and P. pavonica. PPPE showed the highest ACE-I inhibitory activity before in vitro digestion. In contrast to PPPE, LOPE (20.90 ± 0.00%) and URPE (20.20 ± 0.00%) showed higher ACE-I inhibitory activity after in vitro digestion. The highest total phenolic content (TPC) (77.86 ± 1.00 mg GAE/g) was determined in LOPE. On the other hand, the highest AOACUPRAC (74.69 ± 1.78 mg TE/g) and AOAABTS (251.29 ± 5.0 mg TE/g) were detected in PPPE. After in vitro digestion, LOPE had the highest TPC (22.11 ± 2.18 mg GAE/g), AOACUPRAC (8.41 ± 0.06 mg TE/g), and AOAABTS (88.32 ± 0.65 mg TE/g) (p < 0.05). In vitro protein digestibility of three macroalgal protein extracts ranged from 84.35 ± 2.01% to 94.09 ± 0.00% (p < 0.05). Three macroalgae showed high oil holding capacity (OHC), especially PPPE (410.13 ± 16.37%) (p < 0.05), but they showed minimum foaming and emulsifying properties. The quality of the extracted macroalgal proteins was assessed using FTIR, SDS-PAGE, and DSC analyses. According to our findings, the method applied for macroalgal protein extraction could have a potential the promise of ultrasonication application as an environmentally friendly technology for food industry. Moreover, URPE, PPPE, and LOPE from sustainable sources may be attractive in terms of nourishment for people because of their digestibility, antioxidant properties, and ACE-I inhibitory activities.

Transglutaminase-Induced Polymerization of Pea and Chickpea Protein to Enhance Functionality

Pulse proteins, such as pea and chickpea proteins, have inferior functionality, specifically gelation, compared to soy protein, hindering their applications in different food products, such as meat analogs. To close the functionality gap, protein polymerization via targeted modification can be pursued. Accordingly, transglutaminase-induced polymerization was evaluated in pea protein isolate (PPI) and chickpea protein isolate (ChPI) to improve their functionality. The PPI and ChPI were produced following a scaled-up salt extraction coupled with ultrafiltration (SE-UF) process. Transglutaminase (TGase)-modified PPI and ChPI were evaluated in comparison to unmodified counterparts and to commercial protein ingredients. Protein denaturation and polymerization were observed in the TG PPI and TG ChPI. In addition, the TGase modification led to the formation of intermolecular β-sheet and β-turn structures that contributed to an increase in high-molecular-weight polymers, which, in turn, significantly improved the gel strength. The TG ChPI had a significantly higher gel strength but a lower emulsification capacity than the TG PPI. These results demonstrated the impact of the inherent differences in the protein fractions on the functional behavior among species. For the first time, the functional behavior of the PPI and ChPI, produced on a pilot scale under mild processing conditions, was comprehensively evaluated as impacted by the TGase-induced structural changes.

Improvement of foaming properties of ovalbumin: Insights into the synergistic effect of preheating and high-intensity ultrasound on physicochemical properties and structure analysis

Ovalbumin (OVA), characterized by its high concentration in eggs, possesses remarkable foaming properties. Nevertheless, OVA is highly sensitive to thermal changes and acid-base conditions, substantially hampering its application potential for foaming purposes within the food industry. This experiment aimed to examine the effects of preheating and high-intensity ultrasound (HIU) treatment at different powers on OVA foaming properties and explore the underlying mechanisms. The results revealed that OVA exhibited the highest foaming capacity (31.5 %) and foaming stability (96.7 %) under the treatment condition of 200w + 60°C. Additionally, significant improvements were observed in the content of free sulfhydryl groups (37.27 μmg/g), solution viscosity (142.33 mPa·s), and surface hydrophobicity (37.27 μg BPB) under this condition. The absolute value of the zeta potential (-10.28 mV) was significantly increased in the 200w + 60°C treatment group. Moreover, the polymer dispersity index of OVA (0.6045) was significantly reduced, resulting in improved dispersion than the control group. The structural analysis revealed significant changes in the α-helix and β-sheet content of OVA after treatment at 200w + 60 °C. The X-ray diffraction pattern exhibited sharper peaks, indicating a crystal structure, and the fluorescence peak displayed a slight blue shift along with increased hydrophobicity. Moreover, the preheating and HIU treatment induced a continuous uneven and irregular pore structure in OVA, which ultimately enhanced its foaming properties. In conclusion, the preheating and HIU treatment offers a novel approach to enhance the foaming properties of OVA.

Plant-based proteins: advanced extraction technologies, interactions, physicochemical and functional properties, food and related applications, and health benefits

Even though plant proteins are more plentiful and affordable than animal proteins in comparison, direct usage of plant-based proteins (PBPs) is still limited because PBPs are fed to animals as feed to produce animal-based proteins. Thus, this work has comprehensively reviewed the effects of various factors such as pH, temperature, pressure, and ionic strength on PBP properties, as well as describes the protein interactions, and extraction methods to know the optimal conditions for preparing PBP-based products with high functional properties and health benefits. According to the cited studies in the current work, the environmental factors, particularly pH and ionic strength significantly affected on physicochemical and functional properties of PBPs, especially solubility was 76.0% to 83.9% at pH = 2, while at pH = 5.0 reduced from 5.3% to 9.6%, emulsifying ability was the lowest at pH = 5.8 and the highest at pH 8.0, and foaming capacity was lowest at pH 5.0 and the highest at pH = 7.0. Electrostatic interactions are the main way for protein interactions, which can be used to create protein/polysaccharide complexes for food industrial purposes. The extraction yield of proteins can be reached up to 86-95% with high functional properties using sustainable and efficient routes, including enzymatic, ultrasound-, microwave-, pulsed electric field-, and high-pressure-assisted extraction. Nondairy alternative products, especially yogurt, 3D food printing and meat analogs, synthesis of nanoparticles, and bioplastics and packaging films are the best available PBPs-based products. Moreover, PBPs particularly those that contain pigments and their products showed good bioactivities, especially antioxidants, antidiabetic, and antimicrobial.

Relationship between Soybean Protein Isolate and Textural Properties of Texturized Vegetable Protein

To identify the ideal soybean protein isolate for texturized vegetable protein processing, the effect of different soybean protein isolates on texturized vegetable protein composition was studied. Three different types of soybean protein isolates were selected and analyzed for functional properties (water holding capacity (WHC), emulsifying properties, foaming properties), amino acid content, and protein secondary structure. Then, using the same formulation, the soybean protein isolates were extruded to produce texturized vegetable protein, and its textural properties, degree of texturization, microstructure, free sulfhydryl (free SH), and disulfide (S-S) content were determined. Lastly, a correlation analysis was performed to examine the connection between soybean protein isolates and texturized vegetable proteins. After correlation analysis, the soybean protein isolate functional properties that affect the textural properties of the texturized vegetable protein were as follows: the emulsifying property affected the hardness, adhesiveness, springiness, gumminess, and chewiness of the texturized vegetable proteins; and the foaming property affected the gumminess, chewiness, and the degree of texturization of the texturized vegetable proteins. In addition, 16 amino acids including threonine (Thr), methionine (Met), and arginine (Arg) affect texturized vegetable proteins, mainly with respect to adhesiveness, springiness, and free SH. The effects of secondary structure (α-helix, random coil) on texturized vegetable proteins were degree of texturization, resilience, and cohesion, respectively. Therefore, choosing the soybean protein isolate with better emulsifying and foaming properties provides a more suitable approach for processing texturized vegetable protein.

Functionality of pea protein isolate solutions is affected by reconstitution conditions

Pea protein isolate (PPI), a high-concentration protein ingredient derived from peas, is increasingly utilized in food applications, including beverages, meat or dairy alternatives, and baked goods. The protein extraction process typically used to manufacture PPI renders the protein highly denatured, which can have a negative impact on its functionality. Therefore, it is critical to understand how to prepare and utilize PPI to maximize its functionality. The current study evaluates the effect of select reconstitution conditions on the structure and functionality of PPI, across a range of protein concentrations (4%-10%) relevant to a variety of food applications. Temperature during reconstitution with water and hydration time impacted both protein hydration and its functionality. Increasing reconstitution temperature from 20 to 60°C and increasing hydration time from 10 to 40 min decreased PPI particle size in solution and increased PPI solubility. Viscosity of PPI solutions also increased with mild heating and longer hydration time, whereas their flow behavior was highly dependent on protein concentration. Experimental data demonstrates that reconstitution conditions have a significant impact on PPI functionality. These findings can help food formulators develop high-quality food products that utilize PPI as a functional ingredient. PRACTICAL APPLICATION: Protein in commercially available pea protein isolates (PPIs) is usually highly denatured, and thus, it is important to find ways to maximize its functionality in practical applications. The findings of this study inform food scientists how to leverage PPI at various protein concentrations with optimal reconstitution conditions to develop high-quality products. Generally, mild heating and longer hydration times improve PPI functional performance.

Yellow Field Pea Protein (Pisum sativum L.): Extraction Technologies, Functionalities, and Applications

Yellow field peas (Pisum sativum L.) hold significant value for producers, researchers, and ingredient manufacturers due to their wealthy composition of protein, starch, and micronutrients. The protein quality in peas is influenced by both intrinsic factors like amino acid composition and spatial conformations and extrinsic factors including growth and processing conditions. The existing literature substantiates that the structural modulation and optimization of functional, organoleptic, and nutritional attributes of pea proteins can be obtained through a combination of chemical, physical, and enzymatic approaches, resulting in superior protein ingredients. This review underscores recent methodologies in pea protein extraction aimed at enhancing yield and functionality for diverse food systems and also delineates existing research gaps related to mitigating off-flavor issues in pea proteins. A comprehensive examination of conventional dry and wet methods is provided, in conjunction with environmentally friendly approaches like ultrafiltration and enzyme-assisted techniques. Additionally, the innovative application of hydrodynamic cavitation technology in protein extraction is explored, focusing on its prospective role in flavor amelioration. This overview offers a nuanced understanding of the advancements in pea protein extraction methods, catering to the interests of varied stakeholders in the field.

Proteins from Blackberry Seeds: Extraction, Osborne Isolate, Characteristics, Functional Properties, and Bioactivities

Blackberry fruit contains high levels of nutrients and phenolic compounds. Blackberry pomace accounts for 20~30% of its whole fruit during processing and is generally treated as fertilizer. Blackberry pomace has many seeds that contain carbohydrates, polyphenols, flavonoids, pectin, protein, and other bioactive nutrients. However, its functional properties and seed protein compositions have not been reported. We used a single-factor experiment, response surface, and Osborne isolate method to extract protein isolate, albumin, globulin, glutelin, and prolamin from blackberry seeds for the first time and evaluated their characteristics and functional properties. Glutelin and protein isolate showed good water-holding capacity, emulsification, and foaming capacity, while albumin and globulin showed good oil-holding capacity and thermal stability. They were found to have good antioxidant activities that might be good DPPH free radical scavengers, especially prolamin, which has the lowest IC50 value (15.76 μg/mL). Moreover, globulin had the lowest IC50 value of 5.03 μg/mL against Hela cells, 31.82 μg/mL against HepG2 cells, and 77.81 μg/mL against MCF-7 cells and a high selectivity index (SI), which suggested globulin had better anti-cervical, antihepatoma, and anti-breast activity but relatively low cytotoxicity. These seed proteins may have great prospects for the development and application of food and drugs in the future.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation

BACKGROUND

Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization.

SCOPE AND APPROACH

This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed.

KEY FINDINGS AND CONCLUSIONS

The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Effects of processing technologies on the antioxidant properties of common bean (Phaseolus vulgaris L.) and lentil (Lens culinaris) proteins and their hydrolysates

The effects of ultrasound (280 W, 5 min), heat treatment (75 °C and 90 °C for 10 min) and microfluidization (125 MPa, 4 cycles) as pre or post treatments and their combination with enzymatic hydrolysis on the antioxidant properties of common bean and lentil protein hydrolysates were investigated. In general, hydrolysis resulted in increases of antioxidant activity, both in the presence and absence of processing technologies. The increases reached maximum values of 158% (ABTS), 105% (DPPH), 279% (FRAP) and 107% (TAC) for the bean protein hydrolysates submitted to post-treatment with ultrasound (ABTS, FRAP and TAC) and pre-treatment with microfluidization (DPPH), compared to their respective controls (untreated samples). For lentil proteins, the increases reached 197% (ABTS), 170% (DPPH), 690% (FRAP) and 213% (TAC) for samples submitted to ultrasound post-treatment (ABTS), microfluidization pre-treatment (DPPH) and post-treatment (FRAP), and 75 °C pre-treatment (TAC) compared to their respective controls. Surface hydrophobicity and molecular weight profile by SEC-HPLC analysis indicated modifications in the structures of proteins in function of the different processing technologies. For both proteins, electrophoresis indicated a similar profile for all hydrolysates, regardless of the process applied as pre or post treatment. Solubility of bean and lentil protein concentrates was also improved. These results indicated that different processing technologies can be successfully used in association with enzymatic hydrolysis to improve the antioxidant properties of lentil and bean proteins.

High-intensity ultrasound treatment on casein: Pea mixed systems: Effect on gelling properties

This study aimed to investigate the suitability of the application of high-intensity ultrasounds (HIUS) to improve the acid induced gelation of mixed protein systems formed by casein micelles (CMs) and pea. The protein suspensions were prepared in different protein ratios CMs: pea (100:0, 80:20, 50:50, 20:80, 0:100) at 8% (w/w) total protein concentration. In the suspensions, the ultrasound treatment produced an increase in solubility, surface hydrophobicity, and a decrease in the samples' viscosity, with more remarkable differences in protein blends in which pea protein was the major component. However, the replacement of 20% of CMs for pea proteins highly affected the gel elasticity. Hence, the creation of smaller and more hydrophobic building blocks before acidification due to the HIUS treatment increased the elasticity of the gels up to 10 times. Therefore, high-intensity ultrasounds are a suitable green technique to increase the gelling properties of CMs: pea systems.

Application of plant-based proteins for fortification of oat yogurt storage stability and bioactivity

The purpose of this study was to evaluate the addition of plant-based peanut protein isolate (PNP) and commercial pea protein (CPP) on the quality of oat yogurt (OY). PNP and CPP were partially characterized for techno-functional properties. PNP had higher solubility (acidic and basic regions) and emulsifying activity than CPP. The water absorption capacity of CPP is significantly (p < 0.05) higher than PNP. Amino acid profiles of PNP and CPP were promising for the nutritional enhancement of OYs. OYs with PNP or CPP (0.5, 1, 2% w/v) were stored for 21 days and compared to the control group with no protein. On the 21st day of storage, (i) PNP- or CPP-added OYs were found to be comparable to the control with respect to post-acidification and viscosity, (ii) syneresis was more evident in PNP-added OYs than in CPP-added ones, (iii) total color change of 1% CPP-added OY was equal to the control, and (iv) hardnesses of control, 2% PNP, and 2% CPP-added OYs were 0.29 ± 0.00, 0.39 ± 0.01, and 0.45 ± 0.00 N, respectively. No adverse sensory effects were detected for CPP or PNP addition. Both proteins increased the total phenolic, soluble protein, antioxidant, antihypertensive, and α-glucosidase inhibition activity of oat milk and OYs, with PNP superior to CPP overall. Compared to oat milk, the fermentation process increased ACE inhibition activity in in vitro digested samples, whereas it reduced digested yogurts' antioxidant activity. Utilization of PNP in OY can solve the waste problem of peanut producers and the texture problem of the OY producers while formulating a functional product. PRACTICAL APPLICATION: Plant-based (PB) yogurts have a growing consumer demand. The low-protein content of PB yogurts results in low acceptance with respect to their undesirable textural and sensorial attributes. This study provided a technical basis for the PB yogurt manufacturers focusing on the addition of commercial pea protein and isolated peanut protein into oat yogurt formulation without any thickeners or flavors. In vitro digestion of protein-added oat milk and oat yogurts showed the benefits of fermentation on bioactivity to the consumers.

Comprehensive Analysis of Physicochemical, Functional, Thermal, and Morphological Properties of Microgreens from Different Botanical Sources

Due to the significant increase in global pollution and a corresponding decrease in agricultural land, there is a growing demand for sustainable modes of modern agriculture that can provide nutritious food. In this regard, microgreens are an excellent option as they are loaded with nutrients and can be grown in controlled environments using various vertical farming approaches. Microgreens are salad crops that mature within 15-20 days, and they have tender leaves with an abundant nutritive value. Therefore, this study aims to explore the physicochemical, techno-functional, functional, thermal, and morphological characteristics of four botanical varieties of microgreens, including carrot (Daucus carota), spinach (Spinacia oleracea), bathua (Chenopodium album), and Bengal gram (Cicer arietinum), which are known for their exceptional nutritional benefits. Among the four botanical varieties of microgreens studied, bathua microgreens demonstrated the highest protein content (3.40%), water holding capacity (1.58 g/g), emulsion activity (56.37%), and emulsion stability (53.72%). On the other hand, Bengal gram microgreens had the highest total phenolic content (32.2 mg GAE/g), total flavonoid content (7.57 mg QE/100 g), and DPPH activity (90.60%). Fourier transform infrared spectroscopy analysis of all microgreens revealed the presence of alkanes, amines, and alcohols. Moreover, X-ray diffraction analysis indicated low crystallinity and high amorphousness in the microgreens. Particle size analysis showed that the median, modal, and mean sizes of the microgreens ranged from 110.327 to 952.393, 331.06 to 857.773, and 97.567 to 406.037 μm, respectively. As per the observations of the results, specific types of microgreens can be utilized as an ingredient in food processing industry, including bakery, confectionery, and more, making them a promising nutritive additive for consumers. This study sheds light on various food-based analytical parameters and offers a foundation for future research to fully harness the potential of microgreens as a novel and sustainable food source, benefiting both the industry and consumers alike.

Impact of pH on pea protein-hydroxypropyl starch hydrogel based on interpenetrating network and its application in 3D-printing

Improving the mechanical and 3D printing performance of pea protein (PeaP) hydrogels contributes to the development of innovative plant-based gel products. Herein, we proposed a strategy for constructing PeaP-hydroxypropyl starch (HPS) interpenetrating network hydrogels, in which the structure, strength, and 3D printing properties of the hydrogels were regulated by changing pH. Results showed that pH significantly affected the gelation process of PeaP/HPS hydrogels. The hydrogels formed a lamellar structure at pH 3, a granule aggregation network structure at pH 5, porous structures at pH 7 and 9, and a honeycomb structure at pH 11. The strength of hydrogels formed at different pH values had the following order: pH 3 ＞pH 11 ＞ pH 7 ＞pH 9 ＞pH 5. The storage modulus (G') of the hydrogel at pH 3 was up to 4149 Pa, but only 695 Pa at pH 5. Moreover, hydrogel at pH 3 had the best self-recovery of 55%. 3D printed objects from gel inks at pH 3 exhibited high structural integrity and fidelity at 60 °C. Gelling force analysis indicated hydrogen bonds were the dominant interaction within all hydrogels. Overall, this study suggested that PeaP/HPS hydrogel formed at pH 3 possessed the most excellent mechanical properties and 3D printing capabilities, which may provide insights into the development of novel PeaP-based gel food ingredients and promote the application of PeaP in the food industry.

Effect of Stir-Frying on Physicochemical and Functional Properties of Oat Protein Isolates

The heat treatment required for the deactivation of enzymes was carried out on crop species such as oats. Stir-frying, a frequently employed method for enzyme inactivation to preserve their desirable shelf life, can result in diminished nutritional value and protein degeneration. The mechanism by which stir-frying affects the oat protein remains largely unknown. Therefore, this study aimed to investigate the physicochemical and functional properties of the extracted oat protein isolates (OPI) at different stir-frying durations (0, 10, 20, and 30 min) at a temperature of 230 °C. The findings of this study demonstrated that stir-frying led to a decrease in the content of amino acids (AA), potentially attributed to the involvement of certain amino acids in the Maillard reaction. As the time of stir-frying increased, the secondary structure of OPI underwent changes: specifically, β-turns transformed into β-sheets. The process of protein denaturation and redistribution of chemical bonds resulted in an increase in the disulfide bond content of OPI, leading to aggregation, large particle size, and reduced digestibility. However, the water retention properties, foaming properties, and emulsification properties of OPI showed improvement. These findings provide valuable insights for the controlled and precise processing of oats and highlight the potential of OPI as a functional food.

Structural, functional properties of protein and characteristics of tofu from small-seeded soybeans grown in the Loess Plateau of China

The structural, functional properties of protein isolated from small-seeded soybeans were investigated and characteristics of tofu were studied. Small-seeded soybean protein had obvious α', α, β, acidic and basic subunits bands and two endothermic peaks (76.02-76.63℃ and 91.94-94.25℃). Small-seeded black soybean protein isolates (SBSPI) had more β-sheet (31.90-33.54%) structure, while small-seeded yellow soybean protein isolates (SYSPI) had more α-helix (18.89-20.72%) structure. SYSPI had higher fluorescence intensity (839.10-847.80) than SBSPI (482.70-565.10). SBSPI exhibited higher surface hydrophobicity (939.51-1252.75) and water absorption capacity (8.07-8.50 g/g). Tofu made from small-seeded yellow soybeans had higher yield (549.46-560.23 g/100 g soybean) and was brighter (L*, 74.61-77.48) and more yellowish (b*, 14.83-14.95) in color. Tofu made from Fugu small-seeded black soybean (FGSBS) had the highest hardness (178.52 g), adhesiveness (-25.77 g.sec), chewiness (87.45 g) and resilience (0.26), signifying a more compact structure.

Thermal Behavior of Pea and Egg White Protein Mixtures

The partial substitution of animal protein by plant protein is a new opportunity to produce sustainable food. Hence, to control the heat treatment of a composite protein ingredient, this work investigated the thermal behavior of mixtures of raw egg white (EW) and a laboratory-prepared pea protein isolate (PPI). Ten-percentage-by-weight protein suspensions prepared with different PPI/EW weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) at pH 7.5 and 9.0 were analyzed by differential scanning calorimetry (DSC) and dynamic rheology in temperature sweep mode (T < 100 °C). The DSC data revealed changes in the thermal denaturation temperatures (Td) of ovotransferrin, lysozyme, and pea legumin, supposing interactions between proteins. Denaturation enthalpy (∆H) showed a high pH dependence related to pea protein unfolding in alkaline conditions and solubility loss of some proteins in admixture. Upon temperature sweeps (25-95 °C), the elastic modulus (G') of the mixtures increased significantly with the EW content, indicating that the gel formation was governed by the EW protein. Two thermal sol-gel transitions were found in EW-containing systems. In particular, the first sol-gel transition shifted by approximately +2-3 °C at pH 9.0, probably by a steric hindering effect due to the presence of denatured and non-associated pea globulins at this pH.

Solid-state fermentation alters the fate of red kidney bean protein during buccal and gastrointestinal digestion: Relationship with cotyledon cell wall integrity

The relationship between legume cotyledon cell wall and macromolecular nutrient digestibility has attracted increased attention. In this study, the effect of solid-state fermentation by Rhizopus oligosporus RT-3 on the digestibility of red kidney bean protein and its relationship with cotyledon cell integrity were investigated. Buccal digestion and gastrointestinal digestion were performed to compare the fate of protein between unfermented (F0) and fermented samples. Results showed a remarkable disruption in cotyledon cell integrity at the late fermentation period, and it was accompanied by a possible migration/degradation of protein matrix. Buccal and gastrointestinal digestion barely affected cell wall integrity at F0 but notably disintegrated cell morphology at 29 h of fermentation (F29). As this fermentation time, gastrointestinal digestion resulted in higher contents of soluble proteins, peptides, and free amino acids by 1.4-, 1.8-, and 2.5-fold, respectively. Therefore, solid-state fermentation facilitated the structural breakdown of cotyledon cell walls, thereby further improving protein digestibility.

Protein composition of pulses and their protein isolates from different sources and in different isolation pH values using a reverse phase high performance liquid chromatography method

The objective of this study was to compare the composition of pulse proteins isolated from lentils and green and yellow peas at two isolation pH values (9 and 11) and determine the effect of this variability on protein functionality. Chromatogram peaks obtained from reverse-phase high performance liquid chromatography were identified by isolation of albumin-, vicilin- and legumin-rich fractions for the three pulses. Protein composition was obtained for each isolate and compared against that of the originating pulse flour. Lentil flour showed the highest level of vicilin with a vicilin/legumin ratio of ∼ 2.5, while this ratio was 1.3 and 1.2 for green and yellow pea flour, respectively. Albumin content of yellow pea flour was high (∼36.1 %), which reduced to ∼ 15-19 % in isolated proteins showing a loss in albumins during the isolation. Higher extraction pH increased pea protein yield but led to lower protein solubility with no changes in foaming properties and in-vitro digestibility.

Physicochemical characterization of changes in pea protein as the result of cold extrusion

Pea protein is a popular plant-based protein for mimicking textures in meat and dairy analogues which are more sustainable than their animal-based counterparts. However, precise mechanisms for generating specific textures through different processing methods are still being evaluated. This work utilizes a novel low-temperature extrusion process to selectively alter the chemical structure of pea protein. Changes in secondary structure, surface hydrophobicity, electrostatic interactions, and disulfide bonding are characterized through FTIR, ANS- probes, zeta potential, and SDS-PAGE. Extrudates are further characterized using texture parameter analysis. It was found that a linear combination of physicochemical data, generated with multiple linear regression modelling, led to reasonable estimates of the specific mechanical energy and textural properties. This work offers a new method of reactive extrusion to selectively modify interactions in pea protein using low temperature extrusion, and applications may include fatty textures, since the extrudates are found to be largely stabilized through hydrophobic interactions evaluated with surface hydrophobicity measurements.

Effects of tea saponin on the foaming properties of pea protein

Plant proteins are becoming increasingly important for foam formation as an alternative to animal proteins. Consumers, however, are unsatisfied with the foaming properties of pea protein isolates. Recent research on proteins and surfactants has primarily concentrated on chemically synthesized surfactants. In this study, foams were prepared by complexing pea protein isolates with a natural small molecule surfactant tea saponin. This study investigates the mechanisms responsible for the formation and stability of foams prepared from pea protein isolates (PPIs) complexed with tea saponins. Analyses of foaming performance were carried out by analyzing the morphology of foam, foaming properties, foam's rheological properties, and the microstructure of the pea protein-tea saponin complex system. Compared to the pea protein isolate alone, the pea protein-tea saponin complex significantly improved foaming capacity and foaming stability. As shown by light microscopy analysis, the size of the foam decreased and became more homogeneous, probably because of the altered aggregate state of the protein. In this study, natural surfactants and mixtures of plant proteins are studied in order to better understand their properties. The mixed system has excellent prospects for application in the industries related to foam.

Generating Multi-Functional Pulse Ingredients for Processed Meat Products-Scientific Evaluation of Infrared-Treated Lentils

In the last decade, various foods have been reformulated with plant protein ingredients to enhance plant-based food intake in our diet. Pulses are in the forefront as protein-rich sources to aid in providing sufficient daily protein intake and may be used as binders to reduce meat protein in product formulations. Pulses are seen as clean-label ingredients that bring benefits to meat products beyond protein content. Pulse flours may need pre-treatments because their endogenous bioactive components may not always be beneficial to meat products. Infrared (IR) treatment is a highly energy-efficient and environmentally friendly method of heating foods, creating diversity in plant-based ingredient functionality. This review discusses using IR-heating technology to modify the properties of pulses and their usefulness in comminuted meat products, with a major emphasis on lentils. IR heating enhances liquid-binding and emulsifying properties, inactivates oxidative enzymes, reduces antinutritional factors, and protects antioxidative properties of pulses. Meat products benefit from IR-treated pulse ingredients, showing improvements in product yields, oxidative stability, and nutrient availability while maintaining desired texture. IR-treated lentil-based ingredients, in particular, also enhance the raw color stability of beef burgers. Therefore, developing pulse-enriched meat products will be a viable approach toward the sustainable production of meat products.

Salt Solubilization Coupled with Membrane Filtration-Impact on the Structure/Function of Chickpea Compared to Pea Protein

The demand for pulse proteins as alternatives to soy protein has been steeply increasing over the past decade. However, the relatively inferior functionality compared to soy protein is hindering the expanded use of pulse proteins, namely pea and chickpea protein, in various applications. Harsh extraction and processing conditions adversely impact the functional performance of pea and chickpea protein. Therefore, a mild protein extraction method involving salt extraction coupled with ultrafiltration (SE-UF) was evaluated for the production of chickpea protein isolate (ChPI). The produced ChPI was compared to pea protein isolate (PPI) produced following the same extraction method in terms of functionality and feasibility of scaling. Scaled-up (SU) ChPI and PPI were produced under industrially relevant settings and evaluated in comparison to commercial pea, soy, and chickpea protein ingredients. Controlled scaled-up production of the isolates resulted in mild changes in protein structural characteristics and comparable or improved functional properties. Partial denaturation, modest polymerization, and increased surface hydrophobicity were observed in SU ChPI and PPI compared to the benchtop counterparts. The unique structural characteristics of SU ChPI, including its ratio of surface hydrophobicity and charge, contributed to superior solubility at both a neutral and acidic pH compared to both commercial soy protein and pea protein isolates (cSPI and cPPI) and significantly outperformed cPPI in terms of gel strength. These findings demonstrated both the promising scalability of SE-UF and the potential of ChPI as a functional plant protein ingredient.

Impact of Ultrasonication on African Oil Bean (Pentaclethra macrophylla Benth) Protein Extraction and Properties

African oil bean (Pentaclethra macrophylla Benth) is an underutilised edible oil seed that could represent a sustainable protein source. In this study, the impact of ultrasonication on the extraction efficiency and properties of protein from African oil bean (AOB) seeds was evaluated. The increase in the duration of extraction favoured the extraction of AOB proteins. This was observed by an increase in extraction yield from 24% to 42% (w/w) when the extraction time was increased from 15 min to 60 min. Desirable properties were observed in extracted AOB proteins; the amino acid profile of protein isolates revealed higher ratios of hydrophobic to hydrophilic amino acids compared to those of the defatted seeds, suggesting alterations in their functional properties. This was also supported by the higher proportion of hydrophobic amino acids and high surface hydrophobicity index value (3813) in AOB protein isolates. The foaming capacity of AOB proteins was above 200%, with an average foaming stability of 92%. The results indicate that AOB protein isolates can be considered promising food ingredients and could help stimulate the growth of the food industry in tropical Sub-Saharan regions where AOB seeds thrive.

Insights into peptide profiling of sturgeon myofibrillar proteins with low temperature vacuum heating

BACKGROUND

Protein oxidation during food processing causes changes in the balance of protein-molecular interactions and protein-water interactions, ultimately leading to protein denaturation, which results in the loss of a range of functional properties. Therefore, how to control the oxidative modification of proteins during processing has been the focus of research.

RESULTS

In the present study, the intrinsic fluorescence value of the myofibrillar proteins (MP) decreased and the surface hydrophobicity value increased, indicating that the heat treatment caused a significant change in the conformation of the MP. With an increase in heating temperature, protein carbonyl content increased, total sulfhydryl content decreased, and protein secondary structure changed from α-helix to β-sheet, indicating that protein oxidation and aggregation occurred. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that heat treatment can lead to the degradation of proteins, especially myosin heavy chain, although actin had a certain thermal stability. In total, 733 proteins were identified by proteomics, and the protein oxidation caused by low temperature vacuum heating (LTVH) was determined to be mild oxidation dominated by malondialdehyde and 4-hydroxynonenal by oxidation site division.

CONCLUSION

The present study has revealed the effect of LTVH treatment on the protein oxidation modification behavior of sturgeon meat, and explored the effect mechanism of LTVH treatment on the processing quality of sturgeon meat from the perspective of protein oxidation. The results may provide a theoretical basis for the precise processing of aquatic products. © 2023 Society of Chemical Industry.