Comparative structure of starches from high-amylose maize inbred lines and their hybrids

Citrus oil gland and cuticular wax inspired multifunctional gelatin film of OSA-starch nanoparticles-based nanoemulsions for preserving perishable fruit

Inspired by the citrus oil gland and cuticular wax, a multifunctional material that stably and continuously released the carvacrol and provided physical defenses was developed to address issues of fresh-cut fruits to microbial infestation and moisture loss. The results confirmed that low molecular weight and loose structure of starch nanoparticles prepared by the ultrasound-assisted Fenton system were preferable for octenyl succinic anhydride modification compared to native starch, achieving a higher degree of substitution (increased by 18.59 %), utilizing in preparing nanoemulsions (NEs) for encapsulating carvacrol (at 5 % level: 81.58 %). Furthermore, the NEs-based gelatin (G) film improved with surface hydrophobic modification by myristic acid (MA) successfully replicated the citrus oil gland and cuticular wax, providing superior antioxidant (enhanced by 3-4 times) and antimicrobial properties (95.99 % and 84.97 % against Staphylococcus aureus and Escherichia coli respectively), as well as the exceptional UV shielding (nearly 0 transmittance in the UV region), mechanical (72 % increase in tensile strength), and hydrophobic (WCA 133.63°). Moreover, the 5%NE-G@MA film inhibited foodborne microbial growth (reduced by 50 %) and water loss (controlled below 15 %), extending the shelf life of fresh-cut navel orange and kiwi. Thus, the multifunctional film was a potential shield for preserving perishable fresh-cut products.

Heat-moisture treatment of freshly harvested high-amylose maize kernels improves its starch thermal stability and enzymatic resistance

The objective of this work was to study the effects of heat-moisture treatment (HMT) of freshly harvested mature high-amylose maize (HAM) kernels on its starch structure, properties, and digestibility. Freshly harvested HAM kernels were sealed in Pyrex glass bottles and treated at 80 °C, 100 °C, or 120 °C. HMT of HAM kernels had no impact on its starch X-ray diffraction pattern but increased the relative crystallinity. This result together with the increased starch gelatinization temperatures and enthalpy change indicated starch molecules reorganization forming long-chain double-helical crystalline structure during HMT of HAM kernels. The aggregation of starch granules were observed after HMT, indicating interaction of starch granules and other components. This interaction and the high-temperature crystalline structure led to reductions in the starch digestibility, swelling power, solubility, and pasting viscosity of the HAM flours. Some starch granules remained intact and showed strong birefringence after the HAM flours were precooked at 100 °C for 20 min and followed by enzymatic hydrolysis, and the amount of undigested starch granules increased with increasing HMT temperatures. This result further supported that HMT of HAM kernels with high moisture level could increase the starch thermal stability and enzymatic resistance.

Structure and physicochemical properties of starches from six accessions of the genus Pueraria in China

Kudzu (Pueraria lobata) root contains abundant starch, but the physicochemical properties of kudzu starch are not well understood. In this study, we compared the compositions and physicochemical properties of starches isolated from six Pueraria accessions in China. Caige starch exhibited the highest purity (96.99 %) and amylose content (24.76 %), while Yege starch contained higher levels of puerarin (493.37 μg/g) and daidzein (38.68 μg/g). All kudzu starches were rich in resistant starch, with RS2 content ranging from 38.61 % to 46.22 % and RS3 content from 3.59 % to 6.04 %. The granules of kudzu starches varied in morphology, with Yege starch featuring larger polygonal granules. The kudzu starches presented either A-type or A-type-like C-type diffraction patterns. Caige starch had a higher IR2 value (1.28), higher gelatinization temperatures, wider temperature ranges, and greater enthalpy changes. Yege (JX) starch exhibited the highest peak viscosity but the lowest setback viscosity and pasting temperature. Fenge starch showed the highest final viscosity, with Fenge (ZJ) starch demonstrating the highest crystallinity (25.7 %) and IR1 value (0.80). These results indicated that kudzu starches derived from various Pueraria species possess unique structural and physicochemical properties, which provide significant potential for applications in food and other industrial fields.

Effects of fatty acids and glycerides on the structure, cooking quality, and in vitro starch digestibility of extruded buckwheat noodles

This study aimed to explore the effects of various lipids on the structure, cooking quality, and in vitro starch digestibility of extruded buckwheat noodles (EBNs) with and without 20% high-amylose corn starch (HACS). Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction revealed that lauric acid bound more strongly to starch than did stearic acid and oleic acid, and the binding capacity of fatty acids with starch was stronger than that of glycerides. The presence of HACS during extrusion facilitated increased formation of starch-lipid complexes. Evaluations of cooking quality and digestion characteristics showed that EBNs containing 20% HACS and 0.5% glycerol monooleate demonstrated the lowest cooking loss (7.28%), and that with 20% HACS and 0.5% oleic acid displayed the lowest predicted glycemic index (pGI) (63.54) and highest resistant starch (RS) content (51.64%). However, excessive starch-lipid complexes were detrimental to EBNs cooking quality and the resistance of starch to digestive enzymes because of the damage to the continuity of the starch gel network. This study establishes a fundamental basis for the development of EBNs with superior cooking quality and a relatively lower GI.

Combined physicochemical and transcriptomic analyses reveal the effect of the OsGA20ox1 gene on the starch properties of germinated brown rice

Genes play a pivotal role in regulating the germination of cereal grains; however, there is limited research on the impact of germination genes on the physicochemical properties of germinated cereal starch. We investigated the effects of the OsGA20ox1 gene on the multiscale structural features and adhesion behavior of germinated brown rice starch. Compared to the knockout lines group, the wild type exhibited a decrease in double-helix content (62.74 %), relative crystallinity (47.39 %), and short-range molecular ordering (2.47 %), accompanied by enhanced erosion on the surface of starch granules. The damage to glycosidic bonds at the double-helix level and the heightened structural amorphization (90.95 %) led to reduced entanglement and interaction among starch molecules, ultimately resulting in reduced characteristic viscosity. Further transcriptomic analysis revealed that OsGA20ox1 could regulate the expression of starch-related enzyme genes in the starch metabolism pathway during germination of brown rice. This study contributes to understanding the role of germination genes in promoting the physicochemical properties of starch in germinated grains, thereby opening up new avenues for the improvement of plant-based starch, and paving the way for further research in this field.

Effect of ultrafine grinding on the structure and physical properties of pregelatinized rice starch

This study used a combination method of ultrafine grinding and pregelatinization to modify rice starch (RS) to delay its retrogradation and provide a rationale for prolonging rice product shelf life. The structure and physicochemical properties of the pregelatinized ultrafine grinding rice starch (PURS) were compared with those of RS, ultrafine grinding rice starch (URS), and pregelatinized rice starch (PRS). The microstructure, molecular weight, branched starch length distribution, short-range order, crystal structure, and physical properties of RS, URS, PRS, and PURS were analyzed, respectively. Results showed that RS, URS, PRS, and PURS granules exhibited similar spherical or polygonal shapes, and the content of amylose and short-branched starch in PURS increased compared with RS, URS, and PRS. Furthermore, the cross-polarization of PRS and PURS disappeared. Long-chain amylopectin and average molecular weight of PURS decreased significantly after ultrafine grinding. Our study suggested reduced breakdown value and setback value and improved gel stability, and PURS was beneficial for delaying retrogradation compared to RS, URS, and PRS. The ultrafine grinding method improved the water swelling capacity (WSC), solubility, pasting properties, and gelation properties of PRS. The hardness of PURS was reduced by ultrafine grinding. These suggest that the combination of ultrafine grinding and pregelatinization could improve the properties of RS. Pearson's correlation analysis showed that the structure of PURS significantly influenced the physicochemical properties. The present study was helpful in better understanding the importance of ultrafine grinding in improving the anti-retrogradation of PURS and provided new insights into extending the shelf life of rice products by ultrafine grinding and pregelatinization.

Combining genome-wide association study and linkage mapping in the genetic dissection of amylose content in maize (Zea mays L.)

KEY MESSAGE

Integrated linkage and association analysis revealed genetic basis across multiple environments. The genes Zm00001d003102 and Zm00001d015905 were further verified to influence amylose content using gene-based association study. Maize kernel amylose is an important source of human food and industrial raw material. However, the genetic basis underlying maize amylose content is still obscure. Herein, we used an intermated B73 × Mo17 (IBM) Syn10 doubled haploid population composed of 222 lines and a germplasm set including 305 inbred lines to uncover the genetic control for amylose content under four environments. Linkage mapping detected 16 unique QTL, among which four were individually repeatedly identified across multiple environments. Genome-wide association study revealed 17 significant (P = 2.24E-06) single-nucleotide polymorphisms, of which two (SYN19568 and PZE-105090500) were located in the intervals of the mapped QTL (qAC2 and qAC5-3), respectively. According to the two population co-localized loci, 20 genes were confirmed as the candidate genes for amylose content. Gene-based association analysis indicated that the variants in Zm00001d003102 (Beta-16-galactosyltransferase GALT29A) and Zm00001d015905 (Sugar transporter 4a) affected amylose content across multi-environment. Tissue expression analysis showed that the two genes were specifically highly expressed in the ear and stem, respectively, suggesting that they might participate in sugar transport from source to sink organs. Our study provides valuable genetic information for breeding maize varieties with high amylose.

Utilizing Synchrotron-Based X-ray Micro-Computed Tomography to Visualize the Microscopic Structure of Starch Hydrogels In Situ

This study aimed to visualize the microstructures of starch hydrogels using synchrotron-based X-ray micro-computed tomography (μCT). Waxy maize starch (WMS, 3.3% amylose, db), pea starch (PS, 40.3% amylose), and high-amylose maize starch (HMS, 63.6% amylose) were cooked at 95 and 140 °C to prepare starch hydrogels. WMS and HMS failed to form a gel after 95 °C cooking and storage, while PS developed a firm gel. At 140 °C cooking, HMS of a high amylose nature was fully gelatinized and generated a rigid gel with the highest strength. Both scanning electron microscopy (SEM) and μCT revealed the unique structural features of various starch hydrogels/pastes prepared at different temperatures, which were greatly affected by the degree of swelling and dispersity of the starches. As a nondestructive method, μCT showed certain advantages over SEM, including minimal shrinkage of the hydrogels, relatively simple sample preparation, and allowing for three-dimensional reconstruction of the hydrogel microstructure. This study indicated that synchrotron-based μCT could be a useful technique in visualizing biopolymer-based hydrogels.

Effects of cooking methods on the physical properties and in vitro digestibility of starch isolated from Chinese yam

The objective of this study was to compare the structural and functional attributes of Chinese yam starches obtained via different domestic cooking methods. Cooking changed the crystalline type from the C type to the CB type, and disrupted the short- and long-range molecular order of Chinese yam starch. The average chain length of amylopectin in BOS (boiling starch) was the smallest at 22.78, while RWS had the longest average chain length, reaching 24.24. These alterations in molecular structure resulted in variations in functional properties such as solubility, swelling power (SP), pasting characteristics, and rheological properties. Among these alterations, boiling was the most effective method for increasing the water-binding capacity and SP of starch. Specifically, its water holding capacity was 2.12 times that of RWS. In vitro digestion experiments indicated that BOS has a higher digestion rate (k = 0.0272 min-1) and lower RDS (rapidly digestible starch), which may be related to its amylopectin chain length distribution. This study can guide us to utilize yam starch through suitable cooking methods, which is relevant for the processing and application of Chinese yam starch.

Recent advances in modified starch based biodegradable food packaging: A review

This study reviews the importance of resistant starch (RS) as the polymer of choice for biodegradable food packaging and highlights the RS types and modification methods for developing RS from native starch (NS). NS is used in packaging because of its vast availability, low cost and film forming capacity. However, application of starch is restricted due to its high moisture sensitivity and hydrophilic nature. The modification of NS into RS improves the film forming characteristics and extends the applications of starch into the formulation of packaging. The starch is blended with other bio-based polymers such as guar, konjac glucomannan, carrageenan, chitosan, xanthan gum and gelatin as well as active ingredients such as nanoparticles (NPs), plant extracts and essential oils to develop hybrid biodegradable packaging with reduced water vapor permeability (WVP), low gas transmission, enhanced antimicrobial activity and mechanical properties. Hybrid RS based active packaging is well known for its better film forming properties, crystalline structures, enhanced tensile strength, water resistance and thermal properties. This review concludes that RS, due to its better film forming ability and stability, can be utilized as polymer of choice in the formulation of biodegradable packaging.

Effects of exogenous salicylic acid on starch physicochemical properties and in vitro digestion under heat stress during the grain-filling stage in waxy maize

Waxy maize starch serves as a pivotal component in global food processing and industrial applications, while high temperature (HT) during the grain-filling stage seriously affects its quality. Salicylic acid (SA) has been recognized for its role in enhancing plant heat resistance. Nonetheless, its regulatory effect on the quality of waxy maize starch under HT conditions remains unclear. In this study, two waxy maize varieties, JKN2000 (heat-tolerant) and SYN5 (heat-sensitive) were treated with SA after pollination and then subjected to HT during the grain-filling stage to explore the effect of SA on grain yield and starch quality. The results indicate that exogenous SA under HT treatment led to an increase in kernel weight and starch content in both varieties. Moreover, SA reduced the HT-induced holes on the surfaces of starch granules, enlarged the starch granule size, elevated the amylopectin branching degree, and reduced amylopectin average chain length. Consequently, improvements of pasting viscosity and the decrease of retrogradation percentage of starch were observed with SA under HT. Exogenous SA reduced HT-induced rapidly digestible starch content in SYN5, but had no significant effect on that in JKN2000. In summary, SA pretreatment effectively alleviated the detrimental effects of HT on starch pasting and thermal properties of waxy maize.

Effects of Waterlogging at Flowering Stage on the Grain Yield and Starch Quality of Waxy Maize

Waterlogging is a common abiotic stress in global maize production. Maize flowering stage (from tasseling to silking) is more fragile to environmental stresses, and this stage frequently overlapped the plum rain season in the middle and lower reaches of Yangtze river in China and affect the yield and quality of spring-sown maize severely. In the present study, the soil moisture content under control and waterlogging conditions at the flowering stage was controlled by a negative-pressure water supply and controlling pot device in a pot trial in 2014-2015. The grain yield, starch content, and starch structural and functional properties under two soil moisture levels were compared using Suyunuo5 (SYN5) and Yunuo7 (YN7) as materials, which are the control hybrids of National waxy maize hybrid regional trials in Southern China. The results observed that the grain yield was reduced by 29.1% for SYN5 with waterlogging due to the decreased grain weight and numbers, which was significantly higher than that of YN7 (14.7%), indicated that YN7 was more tolerant to waterlogging. The grain starch content in YN7 was decreased by 9.4% when plants suffered waterlogging at the flowering stage, whereas the content in SYN5 was only decreased in 2014 and unaffected in 2015. The size of starch granules and proportion of small-molecule amylopectin with waterlogging at the flowering stage increased in SYN5 and decreased in YN7 in both years. The type of starch crystalline structure was not changed by waterlogging, whereas the relative crystallinity was reduced in SYN5 and increased in YN7. The pasting viscosities were decreased, and the pasting temperature was unaffected by waterlogging in general. The gelatinization enthalpy was unaffected by waterlogging in both hybrids in both years, whereas the retrogradation enthalpy and percentage in both hybrids were reduced by waterlogging in 2014 and unaffected in 2015. Between the two hybrids, YN7 has high pasting viscosities and low retrogradation percentage than SYN5, indicated its advantages on produce starch for more viscous and less retrograde food. In conclusion, waterlogging at the flowering stage reduced the grain yield, restricted starch accumulation, and deteriorated the pasting viscosity of waxy maize. Results provide information for utilization of waxy maize grain in food production.

Mung Bean Starch and Mung Bean Starch Sheet Jelly: NaCl-Based Characteristics Variation

Empirical evidence indicates that NaCl can improve the quality of mung bean starch sheet jelly (MBSS) when properly incorporated. In this study, by comparison with a sample without NaCl, the influences of NaCl (1.5-8%, w/w) on the physicochemical and structural properties of mung bean starch (MBS) and the quality of MBSS were investigated. MBS with added NaCl had greater gelatinization temperature and pasting parameters but lower gelatinization enthalpy than native MBS. With the addition of NaCl, the drying rate of MBSS first accelerated and then declined in the oven-drying process. The addition of NaCl improved the cooking properties of MBSS but decreased the hardness of cooked MBSS. Rheological results implied that the linear viscoelastic region of cooked MBSS decreased with the NaCl addition, and the storage modulus and tan δ were more frequency-dependent than the loss modulus of cooked MBSS. The addition of NaCl gradually increased the toughness of dried MBSS and the overall acceptability of cooked MBSS. Furthermore, NaCl decreased the structure order degree of starch in MBSS. Correlation analysis demonstrated that the quality of MBSS had a significant correlation with the molecular and lamellar order of starch. Overall, NaCl could improve the quality of MBSS by regulating the thermal, gelatinizing, and structural properties of MBS.

Inactivation of SSIIIa enhances the RS content through altering starch structure and accumulating C18:2 in japonica rice

SSIIIa was the key gene responsible for RS formation in rice endosperm. The higher RS content in ssIIIa mutant has been proposed to be majorly due to the increased amylose-lipid complexes (RS5). However, the formation of RS5 elicited by ssIIIa mutation and the importance of RS5 for total RS content in rice are still unclear. With japonica ssIIIa loss-of-function mutants created by CRISPR/Cas9 gene editing, the effects of SSIIIa mutation on RS5 were furtherly evaluated through investigating the transcriptome and metabolites. Inactivation of SSIIIa caused significant enhancement in amylose and RS content but without depletion in starch reserves. SSIIIa mutation modulated the genes involved in carbohydrate and lipid metabolisms and the redistribution of substances, led to accumulated protein, glucose, fructose, and C18:2. Besides the increased amylose content and altered amylopectin structure, the increased C18:2 contributed greatly to the enhancement in RS content in japonica ssIIIa mutants through complexing with amylose to form RS5, while the existence of lipid counted against the enhancement of RS content in indica rice. RS5 showed discrepant contributions for the total RS in rice with different genetic background. Inactivation of SSIIIa has great potential in improving RS5 content in japonica rice without great yield loss.

Colorimetric pH indicators based on well-defined amylose and amylopectin matrices enriched with anthocyanins from red cabbage

This study aimed to prepare a novel colorimetric indicator film from virtually pure (99 %) amylose (AM) and anthocyanins extracted from red cabbage (RCA). The AM used was a unique engineered bulk material extracted from transgenic barley grains. Films produced by solution casting were compared to normal barely starch (NB) and pure barley amylopectin (AP), with amylose contents of 30 % and 0 %, respectively. The pH-indicator films were produced by incorporation of RCA into the different starch support matrices with different amylose contents. Barrier, thermal, and mechanical properties, photo degradation stability, and release behavior data revealed that RCA interact differently through the glucan matrices. Microstructural observations showed that RCA were evenly dispersed in the glucan matrix, and AM+RCA indicator films showed high UV-barrier and mechanical performance over normal starch. FTIR revealed that RCA was properly affected by the AM matrix. Moreover, the AM+RCA films showed sensitive color changes in the pH range (2-11) and a predominant Fickian diffusion release mechanism for RCA. This study provides for the first time data regarding AM films with RCA and their promising potential for application as support matrices in responsive food and other industrial biodegradable packaging materials.

Starch Properties of Roasting Rice from Naturally High-Resistant Starch Rice Varieties

This study investigates the effects of moisture content control on the characteristics, properties, and in vitro starch digestion of roasted rice powder made from natural high-resistant starch (RS) rice varieties. The results demonstrate that adjusting the moisture content before roasting significantly affects the RS content of the roasted rice powder. Among various moisture levels tested, the addition of 15% water (rice-to-water ratio of 85:15) before roasting resulted in the highest RS content, reaching 22.61%. Several key parameters of the rice samples before and after optimal moisture control were analyzed, including thermal stability, chain length distribution, volatile flavor composition, and scanning electron microscopy. Additionally, in vitro digestion properties were measured. The findings revealed that the volatile flavor compounds in the high-RS roasted rice significantly increased compared to non-roasted rice. Moreover, the thermal stability of the rice samples improved, and the chain length distribution exhibited significant changes. The water absorption and expansion properties were significantly lower in the high-RS roasted rice. Furthermore, the in vitro starch digestion of the roasted flour made from high-RS rice showed a significantly lower digestion rate compared to common rice, indicating a lower starch hydrolysis index in high-RS rice with the sbe-rs genotype. Overall, the roasting process of natural high-RS rice modifies its characteristics, increases the RS content, enhances the flavor, and results in a lower starch digestion rate compared to common rice. This study provides valuable data for the food industry to promote the application of high-RS rice varieties with mutations in the SBEIIb gene, such as Youtangdao2 (YTD2).

Chachafruto starch: Physicochemical characterization, film-forming properties, and 3D printability

This work aimed to characterize the physicochemical, film-forming properties, and 3D printability of a nonconventional starch from chachafruto. The chachafruto native starch (CHS) presented an excellent extraction yield (10 % db) and purity (99 % db), along with an oval and round morphology, a smooth surface with few defects, and a mean diameter of 15.4 μm. The typical B-type diffraction pattern was observed in the CHS with a crystallinity of 17.4 %. The starch presented a paste temperature of 66.1 °C, an enthalpy of 11.5 J g-1, and a final viscosity of 596 Brabender Units. The thermal analysis demonstrated good thermal stability. The evaluated film presented a reduction in crystallinity (8.18 %) to the CHS, which generated a good elasticity in the material. Likewise, it presented a continuous structure without cracks, providing good barrier properties (2.3 × 10-9 g∙m-1∙s-1∙Pa-1) and high transparency. Meanwhile, 3D prints prepared with CHS showed good textural properties and high consistency. The morphological analysis showed that the prints generated organized cell structures. However, high concentrations of CHS were not efficient in obtaining 3D prints. The results of this work demonstrate the tremendous industrial potential of chachafruto as an unconventional source of starch and some alternative uses for adding value to the crop.

Multi-Scale Comparison of Physicochemical Properties, Refined Structures, and Gel Characteristics of a Novel Native Wild Pea Starch with Commercial Pea and Mung Bean Starch

In the present study, the morphology, refined structure, thermal properties, and dynamic rheological, texture, and digestive properties of common vetch starch, a potential new type of legume starch, were systematically investigated, and compared with commercially available pea and mung bean starch. The results showed that the composition and chemical structure of common vetch starch were similar to the pea and mung bean starch. However, the amylose content (35.69), A-chain proportion (37.62), and relative crystallinity (34.16) of common vetch starch were higher, and the particle size and molecular weight (44,042 kDa) were larger. The value of pasting properties and enthalpy change (ΔH) of gelatinization of common vetch starch was lower and higher than mung bean and pea starch, respectively, and a lower swelling power and pasting index indicate that common vetch starch had higher hot-paste and cold-paste stability. In addition, common vetch starch gel exhibited good rheology, cohesiveness, and anti-digestive properties. These results provide new insights into the broader application of common vetch starch.

Adhesive and Flame-Retardant Properties of Starch/Ca2+ Gels with Different Amylose Contents

Starch, being renewable and biodegradable, is a viable resource for developing sustainable and environmentally friendly materials. The potential of starch/Ca2+ gels based on waxy corn starch (WCS), normal corn starch (NCS), and two high-amylose corn starches, G50 (55% amylose content) and G70 (68% amylose content) as flame-retardant adhesives has been explored. Being stored at 57% relative humidity (RH) for up to 30 days, the G50/Ca2+ and G70/Ca2+ gels were stable without water absorption or retrogradation. The starch gels with increasing amylose content displayed increased cohesion, as reflected by significantly higher tensile strength and fracture energy. All the four starch-based gels showed good adhesive properties on corrugated paper. For wooden boards, because of the slow diffusion of the gels, the adhesive abilities are weak initially but improve with storage extension. After storage, the adhesive abilities of the starch-based gels are essentially unchanged except for G70/Ca2+, which peels from a wood surface. Moreover, all the starch/Ca2+ gels exhibited excellent flame retardancy with limiting oxygen index (LOI) values all around 60. A facile method for the preparation of starch-based flame-retardant adhesives simply by gelating starch with a CaCl2 solution, which can be used in paper or wood products, has been demonstrated.

Preparation and characterization of debranched starches: Influence of botanical source and debranching time

The influence of botanical source (waxy corn, glutinous rice, tapioca and potato), either based on crystallization or morphology, and the debranching time (6-48 h) on the physicochemical properties of debranched starches (DBSs) were systematically investigated. The divergence of depolymerization among different botanical sources within same hydrolysis time suggested that the debranching treatment was not only depending on the molecular profile and crystalline structure, but also related with the granular size and morphology of native starches. Fourier transformation infrared spectroscopy (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) suggested that long-term debranching reaction produced DBSs with improved degree of crystallization and reduced iodine binding capacity. Simulated in-vitro digestion assay showed that the proportion of digestive fractions from different botanical originated DBSs differed greatly. Additionally, prolonging the debranching time yielded increased level of resistant starch. The study may provide guidance for exploring DBSs with various molecular weight to fulfill their tailored applications.

Study on physicochemical, structural, and functional properties of Zhengdan958 and Xianyu335 cornstarch from newly harvested corn under postharvest ripening conditions at ambient temperature

The importance of starch in nutrition and industry is unquestionable. This study investigated the changes in physicochemical, structural, and functional properties of cornstarch from newly harvested Zhengdan958 (Zd958) and Xianyu335 (Xy335) corn during for 0, 20, 40, and 60 d at ambient temperature. The results showed no significant changes in the proximate components and apparent structure of Zd958 and Xy335 cornstarch under postharvest ripening conditions. Compared with 0 d, the molecular weight distribution and mass fraction of Zd958 and Xy335 cornstarch have changed significantly, the relative crystallinity (RC) has significantly increased from 26.4% to 26.5%-28.8% and 28.4%, and R1045/1022 has significantly increased from 0.828 to 0.826 to 0.843 and 0.883, respectively. The changes in structure indicated that the synthesis and rearrangement of cornstarch molecules formed highly ordered crystalline structures, and the ordered structures of long-range and short-range molecules increased. Moreover, the changes in structure affected the pasting characteristics and texture profiles of cornstarch, therefore, affecting the final food quality.

Combined ultrasound and germination treatment on the fine structure of highland barley starch

Highland barley is a grain crop grown in Tibet, China. This study investigated the structure of highland barley starch using ultrasound (40 kHz, 40 min, 165.5 W) and germination treatments (30℃ with 80% relative humidity). The macroscopic morphology and the barley's fine and molecular structure were evaluated. After sequential ultrasound pretreatment and germination, a significant difference in moisture content and surface roughness was noted between highland barley and the other groups. All test groups showed an increased particle size distribution range with increasing germination time. FTIR results also indicated that after sequential ultrasound pretreatment and germination, the absorption intensity of the intramolecular hydroxyl (-OH) group of starch increased, and hydrogen bonding was stronger compared to the untreated germinated sample. In addition, XRD analysis revealed that starch crystallinity increased following sequential ultrasound treatment and germination, but a-type of crystallinity remained after sonication. Further, the Mw of sequential ultrasound pretreatment and germination at any time is higher than that of sequential germination and ultrasound. As a result of sequential ultrasound pretreatment and germination, changes in the content of chain length of barley starch were consistent with germination alone. At the same time, the average degree of polymerisation (DP) fluctuated slightly. Lastly, the starch was modified during the sonication process, either prior to or following sonication. Pretreatment with ultrasound illustrated a more profound effect on barley starch than sequential germination and ultrasound treatment. In conclusion, these results indicate that sequential ultrasound pretreatment and germination improve the fine structure of highland barley starch.

Interfacial Catalysis during Amylolytic Degradation of Starch Granules: Current Understanding and Kinetic Approaches

Enzymatic hydrolysis of starch granules forms the fundamental basis of how nature degrades starch in plant cells, how starch is utilized as an energy resource in foods, and develops efficient, low-cost saccharification of starch, such as bioethanol and sweeteners. However, most investigations on starch hydrolysis have focused on its rates of degradation, either in its gelatinized or soluble state. These systems are inherently more well-defined, and kinetic parameters can be readily derived for different hydrolytic enzymes and starch molecular structures. Conversely, hydrolysis is notably slower for solid substrates, such as starch granules, and the kinetics are more complex. The main problems include that the surface of the substrate is multifaceted, its chemical and physical properties are ill-defined, and it also continuously changes as the hydrolysis proceeds. Hence, methods need to be developed for analyzing such heterogeneous catalytic systems. Most data on starch granule degradation are obtained on a long-term enzyme-action basis from which initial rates cannot be derived. In this review, we discuss these various aspects and future possibilities for developing experimental procedures to describe and understand interfacial enzyme hydrolysis of native starch granules more accurately.

Green nanobiopolymers for ecological applications: a step towards a sustainable environment

To minimize the usage of non-renewable resources and to maintain a sustainable environment, the exploitation of green nanobiopolymers should be enhanced. Biopolymers are generally developed from various microorganisms and plants in the specified condition. This review article discusses the current advances and trends of biopolymers, particularly in the arena of nanotechnology. In addition, discussion on various synthesis steps and structural characterization of green polymer materials like cellulose, chitin, and lignin is also encompassed. This article aims to coordinate the most recent outputs and possible future utilization of nanobiopolymers to the ecosystem with negligible effects by promoting the utilities of polymeric materials like polycaprolactones, starch, and nanocellulose. Additionally, strategic modification of cellulose into nanocellulose via rearrangement of the polymeric compound to serve various industrial and medical purposes has also been highlighted in the review. Specifically, the process of nanoencapsulation and its advancements in terms of nutritional aspects was also presented. The potential utility of green nanobiopolymers is one of the best cost-effective alternatives concerning circular economy and thereby helps to maintain sustainability.

Investigation of the mechanism of different 3D printing performance of starch and whole flour gels from tuber crops

This study aims to reveal the variation in 3D printing performance of whole flour and starch gels as derived from different varieties of tuber crops including cassava, potato, and yam, along with its mechanism. The whole flour of the same tuber crops showed a higher branching degree, average molecular weight (R¯_h), and the proportion of AM chains for 100 < X ≤ 1000 than its starch. Due to the higher degree of branching, the crystallinity of whole flour reached a higher level. In this circumstance, G2' of the dispersion system decreased, which facilitated smooth extrusion of ink from the nozzle, thus improving the precision of printing for the final product. Besides, a higher R¯_h and the percentage of AM chains for 100 < X ≤ 1000 made it easier for the material to extrude, thus enhancing the printing accuracy of the product. The higher short-range ordered structure of whole flour also enhanced the printing performance of 3D printed products. This research contributes an effective solution to the selection of starch and whole flour for food 3D printing.

Comparison of the physicochemical properties of starches from maize reciprocal F1 hybrids and their parental lines

Heterosis on maize yield and quality is highly variable and depends on parental selection. This study investigated and compared the starch structure and physicochemical properties among four sweet-waxy maize lines, four waxy maize lines, and their eight reciprocal F1 hybrids. Compared with the sweet-waxy maize, waxy maize and F1 hybrids had lower extent of branching of amylopectin and relative crystallinity, and larger starch granule size. Waxy maize starch had higher breakdown viscosity and retrogradation percentage, and lower setback viscosity and gelatinization enthalpy than the sweet-waxy maize starch. Meanwhile, the peak and setback viscosities, and retrogradation enthalpy of most F1 hybrid starches were higher than those of their female parent, while gelatinization enthalpy was the opposite. The F1 hybrid starches had higher onset temperature and retrogradation percentage and lower gelatinization enthalpy than their male parent in general. In conclusion, this study provides a framework for the production of new hybrids.

Effects of the duration of post-silking drought on the starch physicochemical properties of waxy maize

BACKGROUND

Drought is a major abiotic stress that affects the physicochemical properties of cereal starch. However, quantitative information on the effects of drought duration on the starch quality of waxy maize, a special maize-type starch composed of nearly pure amylopectin, has been lacking. The effects of post-silking drought duration 1-10 (DS10), 1-20 (DS20), and 1-30 (DS30) days after pollination on the physicochemical properties of starch were assessed from 2019 to 2020 using two waxy maize hybrids as materials.

RESULTS

With extending drought duration, the starch granule size and average amylopectin chain length of Jingkenuo2000 (JKN2000) gradually increased, with those of Suyunuo5 (SYN5) being the highest for DS20, followed by DS30. All drought durations decreased the degree of branching of both hybrids, with the lowest value obtained for DS30 and DS20 in JKN2000 and SYN5, respectively. Relative crystallinity increased for DS30 in both hybrids but its responses for DS10 and DS20 differed. Pasting viscosities and gelatinization enthalpy were decreased and retrogradation percentage was increased by drought stress. The lowest pasting viscosities were observed for DS30, and the highest retrogradation percentage was found for DS10 in general.

CONCLUSION

Post-silking drought led to the pasting and retrogradation properties deteriorating, with decreased pasting viscosities and increased retrogradation percentage. The decrease in viscosity was caused by enlarged granules. Meanwhile, the increased proportion of amylopectin chains with a degree of polymerization of 25-36 resulted in lower viscosity and higher retrogradation. © 2022 Society of Chemical Industry.

High-amylose maize starch: Structure, properties, modifications and industrial applications

High-amylose maize refers to a special type of maize cultivar with a 50 %-90 % amylose content of the total starch. High-amylose maize starch (HAMS) is of interest because it possesses unique functionalities and provides many health benefits for humans. Therefore, many high-amylose maize varieties have been developed via mutation or transgenic breeding approaches. From the literature reviewed, the fine structure of HAMS is different from the waxy and normal corn starches, influencing its gelatinization, retrogradation, solubility, swelling power, freeze-thaw stability, transparency, pasting and rheological properties, and even in vitro digestion. HAMS has undergone physical, chemical, and enzymatical modifications to enhance its characteristics and thereby broaden its possible uses. HAMS has also been used for the benefit of increasing resistant starch levels in food products. This review summarizes the recent developments in our understanding of the extraction and chemical composition, structure, physicochemical properties, digestibility, modifications, and industrial applications of HAMS.

Staining Starch with Iodine Solution

Starch is important material in plant tissues, especially for storage tissues. Starches from different plant resources or tissues vary in morphology, content, and physicochemical properties. Starch and iodine can bind specifically to present the shapes and sizes of starch granules in plant tissues. Here, we describe some methods for staining starch in leaf, pollen grain, and starchy seeds with iodine solution. In addition, the isolated starch can also be stained with iodine solution to exhibit its shape and size.

Nutritional composition and bioactive properties of the wholegrain flour obtained from maize inbred lines

The aim of this study was to assess the chemical composition and bioactive properties of the wholegrain flour obtained from eleven maize inbred lines to identify genotypes with increased potential for the development of hybrids with high nutritional and functional value, suitable for food production. The maize inbreds, including seven standard yellow, two QPM (quality protein maize) and two lines for red kernel hybrids, were grown in the experimental field of the Maize Research Institute at the location of Zemun Polje, Serbia. Wholegrain maize flour was got by grinding the maize grain in a laboratory mill. The assessment of the chemical composition and content of certain bioactive compounds, as well as the total antioxidant capacity, was conducted using standard laboratory procedures. The highest starch content (73.73%) was determined in line L8, while line L10 had the highest protein content (12.82%). Among soluble proteins, the a-zein fraction was dominant in most of the lines, ranging from 0.92% to 3.57%. The highest content of total fibres (NDF) was determined in red kernel line L9 (15.77%). Line L8 was the richest in total carotenoids (21.08 mg bCE/g d.m.), while line L7 had the highest total antioxidant capacity (34.30 mmol Trolox/kg d.m.), which can be explained by the presence of anthocyanins in the red grain. Line L1 had the highest content of total sugars (3.36%), and line L4 had the lowest (1.44%). Most of the samples of inbred lines investigated in this study showed good quality parameters regarding chemical composition and bioactive properties. The obtained results may provide some valuable guidelines needed in the following stages of maize breeding and open up various possibilities for the utilization of wholegrain maize flour in the food industry.

Starch Physicochemical Properties of Normal Maize under Different Fertilization Modes

Improving the quality with desired functions of natural starch through agronomic practice will meet the increasing need of people for natural, functional foods. A one-off application of slow-release fertilizer is a simple and efficient practice in maize production, though its influence on the starch quality is scarce. In the present study, the structural and functional properties of the starch of normal maize under two fertilization modes (one-off application of slow-release fertilizer at the sowing time (SF), and three applications of conventional fertilizer at the sowing time, and topdressing at the jointing and flowering stages (CF)) under the same fertilization level (N/P₂O₅/K₂O = 405/135/135 kg/ha) were studied using Jiangyu877 (JY877) and Suyu30 (SY30) as materials. The observed results indicate that the size of starch granules was enlarged by fertilization and the size was the largest under CF in both hybrids. The amylose content was unaffected by CF and reduced by SF in both hybrids. In comparison to no fertilizer (0F), the peak 1/peak 2 ratio was decreased by CF in both hybrids, whereas the ratio under SF was unaffected in JY877 and decreased in SY30. The amylopectin average chain-length was reduced by fertilization and the reduction was higher under CF in JY877. The relative crystallinity was increased by CF in both hybrids and the value under SF was unaffected in SY30 and increased in JY877. The peak, trough, and final viscosities of starch were increased by fertilization in both hybrids. The starch thermal characteristics in response to fertilization modes were dependent on hybrids. The retrogradation enthalpy and percentage were increased by CF in both hybrids, whereas those two parameters under SF were increased in SY30 and decreased in JY877. In conclusion, starch with similar granule size, higher peak 1/peak 2 ratio, and lower relative crystallinity was obtained under SF than under CF for both hybrids. Longer amylopectin chain-length was observed in JY877, which induced lower pasting viscosities in SY30 and lower retrogradation characteristics in JY877.

Characterization of starch structures isolated from the grains of waxy, sweet, and hybrid sorghum (Sorghum bicolor L. Moench)

In this study, starches were isolated from inbred (sweet and waxy) and hybrid (sweet and waxy) sorghum grains. Structural and property differences between (inbred and hybrid) sweet and waxy sorghum starches were evaluated and discussed. The intermediate fraction and amylose content present in hybrid sweet starch were lower than those in inbred sweet starch, while the opposite trend occurred with waxy starch. Furthermore, there was a higher A chain (30.93-35.73% waxy, 13.73-31.81% sweet) and lower B₂ + B₃ chain (18.04-16.56% waxy, 24.07-17.43% sweet) of amylopectin in hybrid sorghum starch. X-ray diffraction (XRD) and Fourier transform infrared reflection measurements affirm the relative crystalline and ordered structures of both varieties as follows: inbred waxy > hybrid waxy > hybrid sweet > inbred sweet. Small angle X-ray scattering and ¹³C CP/MAS nuclear magnetic resonance proved that the amylopectin content of waxy starch was positively correlated with lamellar ordering. In contrast, an opposite trend was observed in sweet sorghum starch due to its long B₂ + B₃ chain content. Furthermore, the relationship between starch granule structure and function was also concluded. These findings could provide a basic theory for the accurate application of existing sorghum varieties precisely.

Non-conventional starch from cubio tuber (Tropaeolum tuberosum): Physicochemical, structural, morphological, thermal characterization and the evaluation of its potential as a packaging material

This work aimed to characterize the physicochemical, structural, morphological, and thermal properties of a non-conventional starch obtained from cubio (Tropaeolum tuberosum), as well as to evaluate the potential use of this native Andean tuber in the preparation of biodegradable packaging. The cubio starch (CUS) showed an intermediated apparent amylose content (31.2 %) accompanied by a high CIE whiteness index (90.8). About the morphology and particle size, the CUS exhibited irregular oval and round shapes and a smooth surface with a mean particle diameter of 14.04 ± 0.1 μm. Although it showed good stability regarding pasting properties, the final viscosity was low. Native CUS exhibits a typical B-type diffraction structure, with a relative crystallinity of 16 %. The resistant starch (RS) fraction of the CUS was 94 %, indicating a low susceptibility to enzymatic hydrolysis. The thermal analysis demonstrated that the CUS showed good thermal stability. Additionally, the films prepared using CUS as raw material showed continuous surfaces without porosities, good thermal stability, and high transparency. The results of this work demonstrate the industrial potential of the CUS as it presents characteristics comparable to commercial potato starch.

Nitrogenous Fertilizer Levels Affect the Physicochemical Properties of Sorghum Starch

Nitrogen is a key factor affecting sorghum growth and grain quality. This experiment was designed to investigate the physicochemical properties of sorghum starch in four sorghum varieties (Liaoza 10, Liaoza 19, Jinza 31, and Jinza 34) under four nitrogen levels: 0 kg/ha urea (N1), 300 kg/ha urea as base fertilizer (N2), 300 kg/ha urea as topdressing at the jointing stage (N3), and 450 kg/ha urea as topdressing at the jointing stage (N4). The results showed that grain size and amylose content increased with increasing nitrogen fertilizer level, peaking at N3. The peak viscosity, final viscosity, gelatinization temperature, initial temperature, final temperature, and enthalpy value increased with the nitrogenous fertilizer level, peaking at N3. The application of nitrogen fertilizer at the jointing period significantly increased the above indicators. However, excess nitrogen at the jointing period (N4) can significantly reduce the above indicators, thus changing the physicochemical properties and structure of sorghum starch. Overall, nitrogen significantly affects the structure and physicochemical properties of sorghum starch.

Using the dominant mutation gene Ae1-5180 (amylose extender) to develop high-amylose maize

Maize amylose is a type of high value-added starch used for medical, food, and chemical applications. Mutations in the starch branching enzyme (SBEIIb), with recessive ae (amylose extender) and dominant Ae1-5180 alleles, are the primary way to improve maize endosperm amylose content (AC). However, studies on Ae1-5180 mutation are scarce, and its roles in starch synthesis and breeding potential are unclear. We found that the AC of the Ae1-5180 mutant was 47.23%, and its kernels were tarnished and glassy and are easily distinguished from those of the wild type (WT), indicating that the dominant mutant has the classical characteristics of the ae mutant. Starch granules of Ae1-5180 became smaller, and higher in amount with irregular shape. The degree of amylopectin polymerisation changed to induce an increase in starch thermal stability. Compared with WT, the activity of granule-bound starch synthase and starch synthase was higher in early stages and lower in later stages, and other starch synthesis enzymes decreased during kernel development in the Ae1-5180 mutant. We successfully developed a marker (mu406) for the assisted selection of 17 Ae1-5180 near isogenic lines (NILs) according to the position of insertion of the Mu1 transposon in the SBEIIb promoter of Ae1-5180. JH214/Ae1-5180, CANS-1/Ae1-5180, CA240/Ae1-5180, and Z1698/Ae1-5180 have high breeding application potential with their higher AC (> 40%) and their 100-kernel weight decreased to < 25% compared to respective recurrent parents. Therefore, using the dominant Ae1-5180 mutant as a donor can detect the kernel phenotype and AC of Ae1-5180-NILs in advance, thereby accelerating the high-amylose breeding process.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11032-022-01323-7.

Relationship between nitrogen fertilizer and structural, pasting and rheological properties on common buckwheat starch

Nitrogen is an essential element for the yield and quality of grain. In this study, the structural and physicochemical properties of two common buckwheat varieties under four nitrogen levels (0, 90, 180, 270 kg N ha^-1) at one location in two years were investigated. With increasing nitrogen level, the contents of moisture and amylose decreased but the contents of ash and crude protein increased. Excessive nitrogen application significantly increased the granule size, but reduced the light transmittance, water solubility, swelling power, absorption of water and oil. All the samples showed a typical A - type pattern, while high relative crystallinity and low order degree were observed under high nitrogen level. The samples under high nitrogen level had lower textural properties, pasting properties and rheological properties but higher pasting temperature and gelatinization enthalpy. These results indicated that nitrogen fertilizer significantly affected the structural and physicochemical properties of common buckwheat starch.

Effects of Extraction Methods on Physicochemical and Structural Properties of Common Vetch Starch

Three extraction methods: water extraction, lactic acid bacteria fermentation, and back-slopping fermentation were applied to extract a new type of legume starch, common vetch starch. Our results showed that the lactic acid bacteria fermented starch had the highest amylose content (35.69%), followed by the back-slopping fermented starch (32.34%), and the water-extracted starch (30.25%). Furthermore, erosion surface, lower molecular weight, smaller particle size, larger specific surface area, and a higher proportion of B1 chain were observed in the fermented starch, especially in the back-slopping fermented starch. All the extracted starches showed a type C structure, but a type C_B structure was observed in the back-slopping fermented starch. In addition, the relative crystallinity of the lactic acid bacteria fermented starch (34.16%) and the back-slopping fermented starch (39.43%) was significantly higher than that of the water-extracted starch (30.22%). Moreover, the swelling power, solubility, pasting, and thermal properties of the fermented starches were also improved. In conclusion, the fermentation extraction method, especially back-slopping fermentation, could improve the quality of the extracted common vetch starch when compared with the traditional water extraction method.

The effects of fermentation of Qu on the digestibility and structure of waxy maize starch

The fermentation of Qu (FQ) could efficiently produce enzymatically modified starch at a low cost. However, it is poorly understood that how FQ influences the waxy maize starch (WMS) structure and the digestion behavior. In this study, WMS was fermented by Qu at different time and starches were isolated at each time point, and its physico-chemical properties and structural parameters were determined. Results showed that the resistant starch (RS), amylose content (AC), the average particle size [D(4,3)] the ratio of peaks at 1,022/995 cm-1, and the onset temperature of gelatinization (T o ) were increased significantly after 36 h. Conversely, the crystallinity, the values of peak viscosity (PV), breakdown (BD), gelatinization enthalpy (ΔH), and the phase transition temperature range (ΔT) were declined significantly after 36 h. It is noteworthy that smaller starch granules were appeared at 36 h, with wrinkles on the surface, and the particle size distribution was also changed from one sharp peak to bimodal. We suggested that the formation of smaller rearranged starch granules was the main reason for the pronounced increase of RS during the FQ process.

Physical and 3D Printing Properties of Arrowroot Starch Gels

This paper aims to investigate the physical and 3D printing properties of arrowroot starch (AS), a natural biopolymer with many potential health benefits. Scanning electron microscopy images showed that AS granules had mixed spherical and elongated geometries, with average sizes of 10.5 ± 2.5 μm. The molecular weight of AS measured by gel permeation chromatography (GPC) was 3.24 × 10⁷ g/mol, and the amylose/amylopectin ratio of AS was approximately 4:11. AS has an A-type crystal structure, with a gelatinization temperature of 71.8 ± 0.2 °C. The overlap concentration (C*) of AS in aqueous solutions was 0.42% (w/v). Temperature-dependent dynamic rheological analyses of 10% to 30% (w/v) AS fluids showed that the storage modulus (G’) reached the maximum values around the gelatinization temperatures, while the yield stress (τ_y) and flow stress (τ_f) values all increased with the increase in AS concentration. The printing accuracy of AS gels was found to be associated with the interplay between the G’ values and the restorability after extrusion, determined by the three-interval thixotropy tests (3ITT). The optimum 3D printing condition occurred at 20% (w/v) AS, the nozzle diameter of 0.60 mm, the printing speed of 100 mm/s and the extrusion speed of 100 mm/s. Our research provides a promising biopolymer to be used in the design of novel personalized functional foods.

Relationships between X-ray Diffraction Peaks, Molecular Components, and Heat Properties of C-Type Starches from Different Sweet Potato Varieties

C-type starches with different proportions of A- and B-type crystallinities have different intensities and crystallinities of X-ray diffraction peaks. In this study, the intensities and crystallinities of X-ray diffraction peaks, molecular components and heat properties of C-type starches were investigated in seven sweet potato varieties, and their relationships were analyzed. The intensity and crystallinity of a diffraction peak at 5.6° were significantly positively correlated to the DP6-12 branch-chains of amylopectin and significantly negatively correlated to the true amylose content (TAC) determined by concanavalin A precipitation, gelatinization temperature, gelatinization enthalpy, water solubility at 95 °C, and pasting temperature. The intensity of diffraction peaks at 15° and 23° were significantly positively correlated to the gelatinization temperature and pasting temperature and significantly negatively correlated to the pasting peak viscosity. The significantly positive relationships were detected between the crystallinity of a diffraction peak at 15° and the DP13-24 branch-chains of amylopectin, gelatinization conclusion temperature and water solubility, between the crystallinity of diffraction peak at 17–18° and the TAC, gelatinization onset temperature, water solubility and pasting temperature, between the crystallinity of a diffraction peak at 23° and the gelatinization conclusion temperature and pasting peak time, and between the total crystallinity and the TAC, gelatinization conclusion temperature, water solubility and pasting temperature. The score plot of principle component analysis showed that the molecular components and heat property parameters could differentiate the C-type starches and agreed with their characteristics of X-ray diffraction peaks. This study provides some references for the utilizations of C-type starches.

High-amylose starch: Structure, functionality and applications

Starch with a high amylose (AM) content (high AM starch, HAS) has attracted increasing research attention due to its industrial application potential, such as functional foods and biodegradable packaging. In the past two decades, HAS structure, functionality, and applications have been the research hotspots. However, a review that comprehensively summarizes these areas is lacking, making it difficult for interested readers to keep track of past and recent advances. In this review, we highlight studies that benefited from rapidly developing techniques, and systematically review the structure, functionality, and applications of HAS. We particularly emphasize the relationships between HAS molecular structure and physicochemical properties.