Characterization of fibrillated antioxidant whey protein hydrolysate and comparison with fibrillated protein solution

Soy protein isolate ameliorate gel properties by regulating the non-covalent interaction between epigallocatechin-3-gallate and myofibrillar protein

This study primarily investigated the improvement of high-dose Epigallocatechin-3-Gallate (EGCG)-induced deterioration of MP gel by soy protein isolate (SPI) addition. The results showed that EGCG could interact with MP, SPI, and HSPI (heated), indicating the competitive ability of SPI/HSPI against EGCG with MP. EGCG was encapsulated by SPI/HSPI with high encapsulation efficiency and antioxidation, with antioxidant activities of 78.5% ∼ 79.2%. FTIR and molecular docking results revealed that MP, SPI, and HSPI interacted with EGCG through hydrogen bonding and hydrophobic interactions. SPI/HSPI competed with MP for EGCG, leading to the restoration of MHC and Actin bands, alleviating the aggregation caused by EGCG and oxidation. Additionally, SPI/HSPI-E significantly reduced the high cooking loss (23.71 and 26.65%) and gel strength (13.60 and 17.02%) induced by EGCG. Hence, SPI competed with MP for EGCG binding site to ameliorate MP gel properties, thereby alleviating the detrimental changes in MP caused by high-dose EGCG and oxidation.

Antioxidant amyloid fibril derived from rice protein hydrolysate as stabilizer towards preparing high-stable emulsion

An antioxidant amyloid fibril was prepared as an emulsifier by fibrillating limited enzymatic hydrolysis-modified rice protein (HRP). The purpose of this study was to investigate the feasibility of using fibrillated HRP to stabilize oil-in-water emulsion. A free radical scavenging assay revealed that the antioxidant activity of fibrillated HRP was 2.09 times higher than that of native rice protein. Fibrillated HRP demonstrated a marked reduction in interfacial tension, increased surface hydrophobicity and contact angle (> 80°), and rapid adsorption to the interface, with 35.34 ± 2.43% interfacial adsorbed protein content. The fibrillated HRP barriers resisted environment stresses such as NaCl, pH variations, long-term storage, while reducing lipid oxidation degree. Additionally, fibrillated HRP-based emulsion was more effective in protecting β-carotene from degradation compared to other samples. These findings provide theoretical support for the development of rice protein-based antioxidant emulsifiers and modification of emulsifying properties of plant proteins.

Effects of enzyme hydrolysis-assisted fibrillation treatment on the solubility, emulsifying properties and antioxidant activity of rice protein

This work aimed to explore the changes of rice protein (RP) in solubility, emulsifying properties, and antioxidant activity after the enzyme hydrolysis-assisted fibrillation dual modification. Results showed that enzyme hydrolysis by papain and fibrillation treatments significantly affected the secondary and tertiary structures of RP. The modified proteins, including RP hydrolysate (RPH), RP nanofibrils (RPN), and RPH nanofibrils (RPHN), demonstrated enhanced solubility and antioxidant activity compared to RP, with RPHN exhibiting the superior performance. The emulsifying capacity of RPH, RPN, and RPHN increased by 9.55 %, 22.86 %, and 26.57 %, respectively, compared to that of RP. Furthermore, RPHN displayed the highest emulsion stability index. Nanoemulsion stabilized by RPHN showed enhanced centrifugal, storage, and oxidative stabilities. Neither RPHN nor RPN exhibited cytotoxicity to human cell lines, and could provide nutrients for cells. Overall, the functional properties and antioxidant activity of RP were significantly improved by enzyme hydrolysis-assisted fibrillation dual modification. This study may provide reference for the development and utilization of nanofibrils from plant proteins.

Effects of molecular weight of hydrolysate on the formation of soy protein isolate hydrolysate nanofibrils: Kinetics, structures, and interactions

Enzymatic hydrolysis prior to protein fibrillation was an effective way to facilitate the formation of nanofibrils. This study aimed to investigate the effects of molecular weights of hydrolysate on the kinetics, structures, and interactions of soy protein isolate (SPI) hydrolysate nanofibrils. The results showed that hydrolysate with molecular weight > 10 kDa showed a distinct fibrillation kinetics curve and a higher apparent rate constant (27.72) during fibrillation, indicating their vital role in determining the fibrillation. Hydrolysate with molecular weight > 10 kDa could form nanofibrils with higher radius gyration (17.11 ± 0.77 Å) due to stronger hydrophobic interaction, showing a stronger fibrillation ability. Hydrolysate with molecular weight within 5-10 kDa exhibited enhanced π-π stacking interactions during fibrillation, thereby promoting the extension of nanofibrils, and contributing to the formation of more nanofibrils. Hydrolysate with molecular weight < 5 kDa tended to randomly aggregate during fibrillation, resulting in a significant loss of cross-β structures in nanofibrils. Therefore, hydrolysate with different molecular weights exhibited synergistic effects during fibrillation.

Regulation of Adsorption Properties of Whey Protein Isolate Fibril-Calcium Alginate Aerogels by Controlling Protein Fibrillation Time

Amyloid-like fibrils have a relatively high specific surface area, which makes them suitable as absorbents. In this study, we prepared absorbent composite aerogels from whey protein isolate fibril (WPIF) and calcium alginate (CA). The impact of protein fibrillation time (4-24 h) on the adsorption properties of these aerogels was assessed, as this influences the nature of the WPIFs formed. Fourier transform infrared spectroscopy analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main molecular interactions in the composite aerogels. Then, the adsorption properties of the aerogels were investigated using crystal violet as a model compound. The adsorption properties of all composite aerogels were significantly improved compared to CA aerogels, which was mainly attributed to the numerous functional groups of the surfaces of the WPIFs, as well as the rougher surface topology of the composite aerogels. The adsorption capacity of the composite aerogels first increased and then decreased with increasing fibrillation time, with 8 h fibrillation leading to the largest adsorption capacity (1886.11 mg/g). Thioflavin T fluorescence, atomic force microscopy, light extinction, average particle size, and zeta potential analysis indicated that the high fibril content, mature fibril morphology, large number of available functional groups on the surface, and relatively low zeta potential of WPIF8 might be the main reasons. Adsorption kinetics and isothermal adsorption profile analysis suggested that monolayer adsorption occurred through chemical adsorption processes. The edible aerogel with high adsorption properties developed in this work has potential application in food and biomedical fields.

Upcycling of Defatted Sesame Seed Meal via Protein Amyloid-Based Nanostructures: Preparation, Characterization, and Functional and Antioxidant Attributes

Herein, the possibility of valorizing defatted sesame seed meal (DSSM) as a viable source for valuable plant proteins and amyloid-based nanostructure was investigated. Sesame seed protein isolate (SSPI) and the major storage protein globulin (SSG) were prepared by alkaline extraction-isoelectric point precipitation as well as fractionation in the case of SSG. The protein samples were characterized for their physicochemical attributes. SSPI and SSG were also evaluated for their ability to form amyloid structures under heating (90 °C) at low pH (2.0). Additionally, the functional attributes, antioxidant activity, and biocompatibility of the proteins and amyloid nanostructures were also examined. SSPI and SSG were both successfully prepared from DSSM. The data showed that the physicochemical attributes of both protein samples were quite similar, except for the fact that SSG was mostly composed of 11S globulin, as evinced by Tricine-SDS-PAGE analysis. TEM micrographs revealed that SSG was able to form curly-shaped fibrillar amyloid structures, whereas those derived from SSPI were mostly amorphous. Thioflavin-T assay and Tricine-SDS-PAGE analysis indicated that acidic heating promoted protein hydrolysis and self-aggregation of the hydrolyzed peptides into a β-sheet rich amyloid structure. Importantly, the amyloid preparations displayed commendable solubility, superior water and oil holding capacities, and antioxidant activity against DPPH and ABTS. The protein amyloid nanostructures were found to be non-toxic against RAW264.7 cells, HaCaT cells, and red blood cells. These findings indicate that DSSM could be upcycled into valuable protein amyloid structures with good potentialities as novel food ingredients.

Formation, structural characteristics and specific peptide identification of gluten amyloid fibrils

This research investigates the formation of amyloid fibrils using enzymatically hydrolyzed peptides from gluten, including its components glutenin and gliadin. After completing the fibrillation incubation, the gluten group demonstrated the most significant average particle size (908.67 nm) and conversion ratio (57.64 %), with a 19.21 % increase in thioflavin T fluorescence intensity due to self-assembly. The results indicated increased levels of β-sheet structures after fibrillation. The gliadin group exhibited the highest zeta potential (∼13 mV) and surface hydrophobicity (H0 = 809.70). Around 71.15 % of predicted amyloidogenic regions within gliadin peptides showed heightened hydrophobicity. These findings emphasize the collaborative influence of both glutenin and gliadin in the formation of gluten fibrils, influenced by hydrogen bonding, hydrophobic, and electrostatic interactions. They also highlight the crucial role played by gliadin with amyloidogenic fragments such as ILQQIL and SLVLQTL, aiming to provide a theoretical basis for understanding the utilization of gluten proteins.

The Effect of Whey Protein Isolate Hydrolysate on Digestive Properties of Phytosterol

Phytosterol (PS) is a steroid, and its bioavailability can be enhanced by interacting with protein in the C-24 hydroxyl group. The interaction between sterols and amino acid residues in proteins can be enhanced by enzymatic hydrolysis. Phytosterol and whey insulation hydrolysates (WPH1-4) fabricated by the Alcalase enzyme at different enzymatic hydrolysis times were selected as delivery systems to simulate sterol C-24 hydroxyl group interaction with protein. Increasing hydrolysis time can promote the production of β-Lg, which raises the ratio of β-turn in the secondary structure and promotes the formation of interaction between WPH and PS. The correlation coefficient between hydrogen bonds and encapsulation efficiency (EE) and bioaccessibility is 0.91 and 0.88 (P < 0.05), respectively, indicating that hydrogen bonds of two components significantly influenced the combination by concealing the hydrophobic amino acids and some residues, which improved PS EE and bioavailability by 3.03 and 2.84 times after PS was combined with the WPI hydrolysate. These findings are expected to enhance the absorption of PS and other macromolecules by protein enzymatic hydrolysis to broaden their applications for food.

Specific ions effect on aggregation behaviors and structural changes of amyloid fibrils from rice glutelin

Metal ions have been considered as an important factor on fibrils assembly. Herein, a comprehensive analysis of specific ions effect on fibril formation and structural changes was investigated. The addition of ions (except Zn2+) accelerated the aggregation kinetics of rice glutelin fibrils (RGFs) from 0.93 to 1.28-2.19 h-1. In addition, the fibrillization rate followed the order of NH4+ > Li+ > Na+ > K+ > Cu2+ > Mg2+ > Ca2+ > Zn2+. The highest yield and length of fibrils were observed with Ca2+, probably due to the ionic bridging effect and hydrated capacity of Ca2+. However, Cu2+ reduced the fibrils yield, which was attributable to the fact that Cu2+ disrupted β-sheet structure and inhibited the transition of monomer to fibrils. The polymorphism of fibrils was observed with different salts, and the light metals presented a superior effect on fibrils formation than heavy metals. Overall, this work will provide a further information into how to tune the structure of RGFs using various ions.

Recovery of soy whey protein from soy whey wastewater at various cavitation jet pretreatment time and their structural and emulsifying properties

Protein-polysaccharide composite is of great significance for the development of soluble protein recovery process. This study investigated the effects of cavitation jet (CJ) pretreatment at different time (0, 60, 120, 180, 240, 300 s) intervals on the recovery of soy whey protein (SWP) from soy whey wastewater using chitosan (CH). In addition, the structure and properties of the SWP/CH complexes were examined. The results showed that the recovery yield of SWP reached 84.44 % when the CJ pretreatment time was 180 s, and the EAI and ESI values of the SWP/CH complex increased from 32.39 m2/g and 21 min to 48.47 m2/g and 32 min, respectively. In the CJ pretreatment process, SWP promotes the recombination with chitosan through electrostatic interaction and hydrogen bond, while hydrophobic interaction is also involved. This study has guiding significance for CJ technology in the recovery and utilization of protein in industrial wastewater.

Proteolysis improves the foaming properties of rice protein fibrils: Structure, physicochemical properties changes, and application in angel food cake

Proteolysis prior to fibrillation can change the functional properties of protein fibrils. This study aimed to investigate the effects of proteolysis pretreatment by alkaline protease on formation, structure, and foaming properties of rice protein fibrils. Thioflavin T fluorescence and conversion assays showed that proteolysis reduced the fibril formation capacity of rice protein. After 12 h of heating, the percent conversion of rice protein and rice protein hydrolysates to fibrils reached 60.32 ± 1.07% and 30.43 ± 2.01%, respectively. Transmission electron microscopy images showed that fibrils derived from rice protein hydrolysates had a longer contour length than rice protein fibrils. The foaming capacity and stability of rice protein hydrolysate fibrils increased by 16.70% and 11.27%, respectively, compared with those of rice protein fibrils. The addition of rice protein hydrolysate fibrils improved the texture of cakes. These results suggested that rice protein hydrolysate fibrils could be a promising plant-based foaming agent.

Impact of Whey Protein Corona Formation around TiO2 Nanoparticles on Their Physiochemical Properties and Gastrointestinal Fate

Previously, we found that whey proteins form biomolecular coronas around titanium dioxide (TiO2) nanoparticles. Here, the gastrointestinal fate of whey protein-coated TiO2 nanoparticles and their interactions with gut microbiota were investigated. The antioxidant activity of protein-coated nanoparticles was enhanced after simulated digestion. The structure of the whey proteins was changed after they adsorbed to the surfaces of the TiO2 nanoparticles, which reduced their hydrolysis under simulated gastrointestinal conditions. The presence of protein coronas also regulated the impact of the TiO2 nanoparticles on colonic fermentation, including promoting the production of short-chain fatty acids. Bare TiO2 nanoparticles significantly increased the proportion of harmful bacteria and decreased the proportion of beneficial bacteria, but the presence of protein coronas alleviated this effect. In particular, the proportion of beneficial bacteria, such as Bacteroides and Bifidobacterium, was enhanced for the coated nanoparticles. Our results suggest that the formation of a whey protein corona around TiO2 nanoparticles may have beneficial effects on their behavior within the colon. This study provides valuable new insights into the potential impact of protein coronas on the gastrointestinal fate of inorganic nanoparticles.

High Viscosity Slows the Utilization of Rapidly Fermentable Dietary Fiber by Human Gut Microbiota

In the present study, the influence of viscosity on the fermentation characteristics of fructooligosaccharides (FOS) by gut microbiota was examined. Different concentrations of methylcellulose (MC) were added to create varying viscosities and the mixture was fermented with FOS by gut microbiota. The results demonstrated that higher viscosity had a significant impact on slowing down the fermentation rate of FOS. Specifically, the addition of 2.5 wt% MC, which had the highest viscosity, resulted in the lowest and slowest production of gas and short-chain fatty acids (SCFAs), indicating that increased viscosity could hinder the breakdown of FOS by gut microbiota. Additionally, the slower fermentation of FOS did not significantly alter the structure of the gut microbiota community compared to that of FOS alone, suggesting that MC could be used in combination with FOS to achieve similar prebiotic effects and promote gut health while exhibiting a slower fermentation rate.

Structural properties of Kudzu protein enzymatic hydrolysate and its repair effect on HepG2 cells damaged by H2O2 oxidation

We investigated the structural properties, foaming capacity and foaming stability, antioxidant activity, and amino acid composition of Kudzu protein (KP) and Kudzu protein hydrolysate (KPH). The peptide sequence of KPH was analyzed using ultra performance liquid chromatography/tandem mass spectrometry (UPLC-MS/MS), and the binding ability of the peptide sequence to Keap1 was predicted through molecular docking simulations. The electrophoresis and molecular weight distribution analysis results showed that the molecular weight of KPH was significantly lower than that of KP, with a mean molecular weight of approximately 2000-5000 Da. The structures and properties were characterized using Fourier transform infrared spectroscopy, relative fluorescence, and circular dichroism. The results showed that KP exposed a large number of hydrophobic groups after enzymatic hydrolysis, and its structure changed from α-helical to random coils. KPH has a higher foaming capacity (200%) and foaming stability (97.5%) than KP, which may be related to the change in structure. These results indicate that moderate hydrolysis can improve the functional properties of KP, providing a new opportunity for its application as a food ingredient. The antioxidant assay results showed that KP and KPH had a good hydroxyl radical, superoxide anion, 1,1-diphenyl-2-picrylhydrazyl (DPPH), and 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) scavenging capacity and a high reducing capacity. KPH exerted better antioxidant effects than KP. The scavenging rates for DPPH, ABTS, hydroxyl radicals, and superoxide anions were 89.31%, 93.14%, 85.74%, and 58.29%, respectively, and its reducing capacity was 2.191, which may be related to the increase in amino acids with antioxidant activity after enzymolysis. In vitro, KP and KPH could significantly repair H2O2-induced oxidative damage in HepG2 cells, reduce the apoptosis rate, activate the Nrf2-Keap1 signaling pathway, reduce the accumulation of reactive oxygen species and malondialdehyde after oxidative damage, increase the activities of superoxide dismutase and glutathione (GSH) peroxidase, and increase the content of GSH and the total antioxidant capacity. Twenty-one peptide components were identified in KPH using UPLC-MS/MS, and the binding ability of 21 peptide components to Keap1 was analyzed through molecular docking technology. The results showed that all 21 peptides in KPH had good antioxidant activity, and real-time quantitative PCR (qRT-PCR) analysis was conducted to further explain the high antioxidant activity of KPH at the genetic level. These results show that KP and KPH are suitable for preparing antioxidant foods and related health foods to prevent oxidation-related diseases. KPH has more beneficial effects than KP.

Functional roles and novel tools for improving-oxidative stability of polyunsaturated fatty acids: A comprehensive review

Polyunsaturated fatty acids may be derived from a variety of sources and could be incorporated into a balanced diet. They protect against a wide range of illnesses, including cancer osteoarthritis and autoimmune problems. The PUFAs, ω-6, and ω-3 fatty acids, which are found in both the marine and terrestrial environments, are given special attention. The primary goal is to evaluate the significant research papers in relation to the human health risks and benefits of ω-6 and ω-3 fatty acid dietary resources. This review article highlights the types of fatty acids, factors affecting the stability of polyunsaturated fatty acids, methods used for the mitigation of oxidative stability, health benefits of polyunsaturated fatty acids, and future perspectives in detail.

Nuclei-induced formation of amyloid fibrils in whey protein: Effects of enzyme hydrolysis on the ability of nuclei to induce fibril formation

Homogeneous and secondary nuclei (HN and SN) are aggregates formed at different stages of whey protein isolate (WPI) self-assembly. More fibrils can form when HN/SN are added as nuclei than when WPI self-assembles. We evaluated the effect of hydrolysis treatment on fibril-induction ability of nuclei derived from WPI, and investigated the relationship between induction ability and nuclear structure. Hydrolyzed SN-induced 9.47% more WPI fibrils than unhydrolyzed SN-induced. Infrared spectroscopy, X-ray diffraction analysis, and atomic force microscopy were used to examine the structural changes in hydrolyzed nuclei and the fibrils induced using these nuclei. We concluded that hydrolysis treatment led to a looser inter-β-sheet packaging in nuclei by increasing the inter-β-sheet distance. The inter-β-sheet distance of cross-β structure was a key determinant of fibril-induction ability of nuclei, which could be enhanced when inter-β-sheet structure was moderately loose. This research may provide a theoretical basis for the mechanism of nuclei-induced WPI fibrillation.

Fibrillization kinetics and rheological properties of panda bean (Vigna umbellata (Thunb.) Ohwi et Ohashi) protein isolate at pH 2.0

Recently, research interests are growing regarding the formation and mechanisms of amyloid fibrils from plant proteins. This study investigated the fibrillization kinetics and rheological behaviors of panda bean protein isolate (PBPI) at pH 2.0 and 90 °C for various heating times (0-24 h). Results showed that PBPI formed two distinct classes of fibrils after heating for 10 h, including flexible fibril with a contour length of ∼751 nm, and rigid fibril with periodicity of ∼40 nm. The secondary structural changes during fibril formation were monitored by circular dichroism spectroscopy and indicated that β-sheet content increased first (0-12 h) and then decreased (>12 h), which coincided with similar changes in thioflavin T fluorescence. The gel electrophoresis revealed that the polypeptides of PBPI were progressively hydrolyzed upon heating, and the resulting short fragments were involved in fibril formation rather than PBPI monomer. PBPI-derived fibrils showed extremely high viscosity and storage modulus. A plausible molecular mechanism for PBPI fibrillation process was hypothesized, including protein unfolding, hydrolysis, assembly into matured fibrils, and dissociation of the fibrils. The findings provide useful information to manipulate the formation of legume proteins-based fibrils and will benefit future research to explore their potential applications.

Industrial Application of Protein Hydrolysates in Food

Protein hydrolysates, which may be produced by the protein in the middle of the process or added as an ingredient, are part of the food formula. In food, protein hydrolysates are found in many forms, which can regulate the texture and functionality of food, including emulsifying properties, foaming properties, and gelation. Therefore, the relationship between the physicochemical and structural characteristics of protein hydrolysates and their functional characteristics is of significant importance. In recent years, researchers have conducted many studies on the role of protein hydrolysates in food processing. This Review explains the relationship between the structure and function of protein hydrolysates, and their interaction with the main ingredients of food, to provide reference for their development and further research.

Research progress on albumin-based hydrogels: Properties, preparation methods, types and its application for antitumor-drug delivery and tissue engineering

Albumin is derived from blood plasma and is the most abundant protein in blood plasma, which has good mechanical properties, biocompatibility and degradability, so albumin is an ideal biomaterial for biomedical applications, and drug-carriers based on albumin can better reduce the cytotoxicity of drug. Currently, there are numerous reviews summarizing the research progress on drug-loaded albumin molecules or nanoparticles. In comparison, the study of albumin-based hydrogels is a relatively small area of research, and few articles have systematically summarized the research progress of albumin-based hydrogels, especially for drug delivery and tissue engineering. Thus, this review summarizes the functional features and preparation methods of albumin-based hydrogels, different types of albumin-based hydrogels and their applications in antitumor drugs, tissue regeneration engineering, etc. Also, potential directions for future research on albumin-based hydrogels are discussed.

Effects of ultrasound pretreatment on functional property, antioxidant activity, and digestibility of soy protein isolate nanofibrils

Nanofibrils, an effective method to modulate the functional properties of proteins, can be promoted by ultrasound pretreatment. This study investigated the effect of ultrasound pretreatment on the structure, functional property, antioxidant activity and digestibility of soy protein isolate (SPI) nanofibrils. The results showed that high amplitude ultrasound had a significant effect on structure of SPI nanofibrils. SPI nanofibrils pretreated by 80% amplitude ultrasound showed a blueshift of the amide II band in Fourier transform infrared spectroscopy (FTIR), resulted in more tryptophan residues being buried and increased the crystallinity. Low amplitude ultrasound (20%) pretreatment significantly improved the solubility, emulsifying activity index (EAI) and water absorption capacity (WAC) of SPI nanofibrils, but 80% amplitude ultrasound pretreatment of SPI nanofibrils reduced emulsifying stability index (ESI). High amplitude ultrasound (60% and 80%) pretreatment of SPI nanofibrils improved the foaming capacity and foaming stability and decreased denaturation temperature. DPPH radical scavenging activity of SPI nanofibrils were significantly improved by ultrasound pretreatment. 20% amplitude ultrasound pretreatment improved DPPH, ABTS radical scavenging activity and ferric reducing antioxidant power of SPI nanofibrils. The digestion rate of 80% amplitude ultrasound-pretreated nanofibrils were consistently higher, and SPI nanofibrils pretreated by ultrasound were more fragmented and shorter after simulating gastrointestinal digestion. This study would expand the application of food-grade protein nanofibrils in the food industry.

Nanofibrils of food-grade proteins: Formation mechanism, delivery systems, and application evaluation

Due to the high aspect ratio, appealing mechanical characteristics, and various adjustable functional groups on the surface proteins, food-grade protein nanofibrils have attracted great research interest in the field of food science. Fibrillation, known as a process of peptide self-assembly, is recognized as a common attribute for food-grade proteins. Converting food-grade proteins into nanofibrils is a promising strategy to broaden their functionality and applications, such as improvement of the properties of gelling and emulsifying, especially for constructing various delivery systems for bioactive compounds. Protein source and processing conditions have a great impact on the size, structure, and morphology of nanofibrils, resulting in extreme differences in functionality. With this feature, it is possible to engineer nanofibrils into four different delivery systems, including gels, microcapsules, emulsions, and complexes. Construction of nanofibril-based gels via multiple cross-linking methods can endow gels with special network structures to efficiently capture bioactive compounds and extra mechanical behavior. The adsorption behavior of nanofibrils at the interface is highly complex due to the influence of several intrinsic factors, which makes it challenging to form stabilized nanofibril-based emulsion systems. Based on electrostatic interactions, microcapsules and complexes prepared using nanofibrils and polysaccharides have combined functional properties, resulting in adjustable release behavior and higher encapsulation efficiency. The bioactive compounds delivery system based on nanofibrils is a potential solution to enhance their absorption in the gastrointestinal tract, improve their bioavailability, and deliver them to target organs. Although food-grade protein nanofibrils show unknown toxicity to humans, further research can contribute to broadening the application of nanofibrils in delivery systems.

The effects of whey protein fibrils on the linear and non-linear rheological properties of a gluten-free dough

The increasing awareness of the celiac disease, an autoimmune disorder caused by the consumption of products containing gluten, has led to a growing interest in the development of gluten-free bakery products. In this study, whey protein fibrils (WPFs) were incorporated to mimic the fibrous network of gluten. The rheological properties and microstructure of the developed gluten-free doughs were evaluated and compared with gluten doughs. Protein fibrils were prepared by heating a whey protein isolate (WPI) solution at 80°C in an acidic environment with low salt concentration, and then the fibril lengths were adjusted by leveling up the solution pH to 3.5 and 7. The dimensions of the fibrils were measured by atomic force microscopy (AFM). Rice and potato starches were mixed with fibrils, WPI, gluten, or without protein, to form different doughs for further investigation. Shear tests, including stress sweep, frequency sweep, and creep recovery, were performed to study the viscoelastic properties of doughs under small or large deformation. The strain-hardening properties of doughs under biaxial extension were studied by the lubricated squeezing flow method. The microstructure of the doughs was characterized by cryo-scanning electron microscopy (cryo-SEM). Compared with doughs prepared with WPI and no proteins, doughs incorporating fibrils showed comparable linear viscoelasticity to gluten dough tested with stress sweep, frequency sweep, and creep recovery in the linear viscoelastic region. More differences between the protein fibril doughs were revealed in the rheological properties in the non-linear region. Creep recovery parameters, such as compliance, elastic moduli during the creep, and recovery stages of gluten dough, were like those of WPF pH7 dough, but significantly different from those of the WPF pH3.5 dough. Strain-hardening properties were found in the WPF pH7 dough, although not in WPF pH3.5 dough. Microstructural characterization showed that both fibrils prepared with the different conditions formed a continuous protein phase for the improvement of dough cohesiveness, but the structure of the phase was different between the two fibrils. To summarize, whey protein fibril at pH 7 seemed to have the potential of being used as an ingredient with similar functions to gluten in gluten-free bakery products.

Effect of CaCl2 on 2 heat-induced whey protein concentrate fibrillation pathways: Spontaneous and nuclear induction

Amyloid fibrils have many excellent functional properties that facilitate their applications in the food industry. There are 2 pathways for whey protein concentrate (WPC) to form amyloid fibril aggregates: spontaneous pathway and nuclear induction pathway. Low ionic strength is a necessary condition for the spontaneous pathway to proceed successfully. In this paper, the effect of salt ions on 2 WPC fibrillation pathways was investigated by adding CaCl₂. The results demonstrated WPC fibrils were unable to form normally through spontaneous pathway as adding CaCl₂; but still could form through nuclear induction pathway with 20 to 30 mM CaCl₂, the nuclei accelerated the fibrillation process led to the resistance to the disordered aggregation brought by CaCl₂. Moreover, divalent cations (Ca²⁺, Mg²⁺) had much stronger effects than monovalent cations (Na⁺) on fibril formation, and the results of X-ray photoelectron spectrum together with Fourier-transform infrared spectroscopy suggested that Ca²⁺ had a greater effect on the fibril formation than Cl^-.

Impact of alkaline electro-activation treatment on physicochemical and functional properties of sweet whey

The impact of alkaline electro-activation (EA) on the protein solubility, foaming, and emulsifying characteristics of whey was investigated. EA caused protein aggregation and conjugation. At low electric current and holding time, proteins aggregation through disulfide bonds was observed, whereas increasing currents and holding times caused proteins to conjugate with sugars such as lactose, lactulose and galactose. The EA process improved the protein solubility at the pH range of 4.0-7.0. Compared to untreated whey, which produced micron-sized and unstable emulsions at pH 3, whey samples treated under 750 mA and 24-48 h holding time formed nano-sized and stable emulsions at this pH. Furthermore, although both untreated and EA-whey produced stable emulsions at pH 7, those emulsions prepared with EA-whey had smaller particle size and were more stable against droplet flocculation. EA-treated whey tended to generate foams with significantly higher overrun and stability. The present study demonstrated that EA can enhance the functionality of whey.

Lysozyme amyloid fibril: Regulation, application, hazard analysis, and future perspectives

Self-assembly of misfolded proteins into ordered fibrillar aggregates known as amyloid results in various human diseases. However, more and more proteins, whether in human body or in food, have been found to be able to form amyloid fibrils with in-depth researches. As a model protein for amyloid research, lysozyme has always been the focus of research in various fields. Firstly, the formation mechanisms of amyloid fibrils are discussed concisely. Researches on the regulation of lysozyme amyloid fibrils are helpful to find suitable therapeutic drugs and unfriendly substances. And this review article summarizes a number of exogenous substances including small molecules, nanoparticles, macromolecules, and polymers. Small molecules are mainly connected to lysozyme through hydrophobic interaction, electrostatic interaction, π-π interaction, van der Waals force and hydrogen bond. Nanoparticles inhibit the formation of amyloid fibers by stabilizing lysozyme and fixing β-sheet. Besides, the applications of lysozyme amyloid fibrils in food-related fields are considered furtherly due to outstanding physical and mechanical properties. Nevertheless, the potential health threats are still worthy of our attention. Finally, we also give suggestions and opinions on the future research direction of lysozyme amyloid fibrils.

Adsorption of azo dyes by a novel bio-nanocomposite based on whey protein nanofibrils and nano-clay: Equilibrium isotherm and kinetic modeling

Excessive discharge of synthetic azo dyes into the aquatic ecosystem is a global concern. Here, we develop a green approach to remediate dye pollutants by fabricating an easily separable bio-nanocomposite, based on nanofibrils from whey protein concentrate together with montmorillonite. The nanocomposite was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and surface area analysis. Nanofibrils lead to a uniform dispersion of montmorillonite in the matrix and also reinforce the nanocomposite. The adsorption efficacy was monitored using cationic (Chrysoidine-G, Bismarck brown-R), reactive (reactive black-5, reactive orange-16), acidic (acid red-88, acid red-114) and direct (direct violet-51, Congo red) dyes. The nanocomposite adsorbed different dyes with different kinetics, cationic dyes quicker and reactive dyes slower. Greater than 93% of Chrysoidine-G was adsorbed over a wide range of dye concentration and pH. Acidic pH and higher temperature are more favorable for the process. Equilibrium adsorption data were reasonably fitted with a linear (Nernst) isotherm model indicating the existence of an unlimited number of adsorption sites which is consistent with the high experimental uptake of 731 mg/g. Kinetic data were well-described by pseudo-second-order and intra-particle diffusion models. We conclude that this environmentally friendly nanocomposite has good potential for use in wastewater treatment and related purposes.

Porcine placenta hydrolysate as an alternate functional food ingredient: In vitro antioxidant and antibacterial assessments

The production of bioactive peptides from animal-based raw materials highly depends on enzymatic hydrolysis. Porcine placenta is an underutilized biomass in Thailand's pig farms, yet it is still a source of proteins and beneficial compounds. Porcine placenta could be used as a protein substrate for the production of enzymatic hydrolysate, which could be employed as a functional food ingredient in the future. The goal of this study was to enzymatically produce porcine placenta hydrolysates (PPH) using three commercial enzymes (Alcalase, Flavouzyme, and papain) and evaluate their in vitro antioxidant and antibacterial activity. The degree of hydrolysis (DH) increased as the enzyme load and hydrolysis time increased, but the DH was governed by the enzyme class. The maximum DH was found after using 10% enzyme for 20 min of hydrolysis (36.60%, 31.40%, and 29.81% for Alcalase, Flavouzyme, and papain). Depending on the enzyme type and DH, peptides of various sizes (0.40-323.56 kDa) were detected in all PPH. PPH created with Alcalase had an excellent reducing capacity and metal chelating ability (p < 0.05), whereas PPH made with Flavourzyme and Papain had higher DPPH• and ABTS•+ inhibitory activities (p < 0.05). Papain-derived PPH also had a strong antibacterial effect against Staphylococcus aureus and Escherichia coli, with clear zone values of 17.20 mm and 14.00 mm, respectively (p < 0.05). When PPH was transported via a gastrointestinal tract model system, its antioxidative characteristics were altered. PPH's properties and bioactivities were thus influenced by the enzyme type, enzyme concentration, and hydrolysis time used. Therefore, PPH produced from porcine placenta can be categorized as an antioxidant and antibacterial alternative.