Bioactive chitosan/ellagic acid films with UV-light protection for active food packaging

Bioactive chitosan films: Integrating antibacterial, antioxidant, and antifungal properties in food packaging

In this work, chitosan was combined with bio-vanillin (BV) and kaolin clay (KC) to create a novel antifungal and biodegradable food packaging film. The chitosan/KC/BV film exhibited an antioxidant capacity of 80 % as measured by DPPH assay, which was significantly higher than that of the chitosan film which has 55.6 %). The film also demonstrated strong antimicrobial activity with a reduction of 90 % in the growth of E. coli and S. aureus compared to the control. Additionally, the chitosan/KC/BV film showed a 75 % reduction in fungal growth compared to chitosan film. Furthermore, the water vapor permeability of the chitosan film was reduced as 5.38 with the addition of KC/BV. The degradation study revealed that the chitosan/KC film degraded by 88 % within 20 days under composting conditions. Additionally, fresh-cut apple slices were used to examine the effectiveness of chitosan/KC/BV film as a packaging material. The fruit's weight loss and browning index showed satisfactory food preservation. Our research suggests that the chitosan/KC/BV film has great potential for use in the food sector due to its strong antioxidant, antimicrobial, and biodegradable properties.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08 V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

Wood inspired biobased nanocomposite films composed of xylans, lignosulfonates and cellulose nanofibers for active food packaging

The growing concerns on environmental pollution and sustainability have raised the interest on the development of functional biobased materials for different applications, including food packaging, as an alternative to the fossil resources-based counterparts, currently available in the market. In this work, functional wood inspired biopolymeric nanocomposite films were prepared by solvent casting of suspensions containing commercial beechwood xylans, cellulose nanofibers (CNF) and lignosulfonates (magnesium or sodium), in a proportion of 2:5:3 wt%, respectively. All films presented good homogeneity, translucency, and thermal stability up to 153 °C. The incorporation of CNF into the xylan/lignosulfonates matrix provided good mechanical properties to the films (Young's modulus between 1.08 and 3.79 GPa and tensile strength between 12.75 and 14.02 MPa). The presence of lignosulfonates imparted the films with antioxidant capacity (DPPH radical scavenging activity from 71.6 to 82.4 %) and UV barrier properties (transmittance ≤19.1 % (200-400 nm)). Moreover, the films obtained are able to successfully delay the browning of packaged fruit stored over 7 days at 4 °C. Overall, the obtained results show the potential of using low-cost and eco-friendly resources for the development of sustainable active food packaging materials.

Hyaluronic Acid/Ellagic Acid as Materials for Potential Medical Application

The aim of this work was to develop and characterize a thin films composed of hyaluronic acid/ellagic acid for potential medical application. Its principal novelty, distinct from the prior literature in terms of hyaluronic acid films supplemented with phenolic acids, resides in the predominant incorporation of ellagic acid-a distinguished compound-as the primary constituent of the films. Herein, ellagic acid was dissolved in two different solvents, i.e., acetic acid (AcOH) or sodium hydroxide (NaOH), and the surface properties of the resultant films were assessed using atomic force microscopy and contact angle measurements. Additionally, various physicochemical parameters were evaluated including moisture content, antioxidant activity, and release of ellagic acid in phosphate buffered saline. Furthermore, the evaluation of films' biocompatibility was conducted using human epidermal keratinocytes, dermal fibroblasts, and human amelanotic melanoma cells (A375 and G361), and the antimicrobial activity was elucidated accordingly against Staphylococcus aureus ATCC 6538 and Pseudomonas aeruginosa ATCC 15442. Our results showed that the films exhibited prominent antibacterial properties particularly against Staphylococcus aureus, with the 80HA/20EA/AcOH film indicating the strong biocidal activity against this strain leading to a significant reduction in viable cells. Comparatively, the 50HA/50EA/AcOH film also displayed biocidal activity against Staphylococcus aureus. This experimental approach could be a promising technique for future applications in regenerative dermatology or novel strategies in terms of bioengineering.

Enhancement of Bone Tissue Regeneration with Multi-Functional Nanoparticles by Coordination of Immune, Osteogenic, and Angiogenic Responses

Inorganic nanoparticles are promising materials for bone tissue engineering due to their chemical resemblance to the native bone structure. However, most studies are unable to capture the entirety of the defective environment, providing limited bone regenerative abilities. Hence, this study aims to develop a multifunctional nanoparticle to collectively control the defective bone niche, including immune, angiogenic, and osteogenic systems. The nanoparticles, self-assembled by biomimetic mineralization and tannic acid (TA)-mediated metal-polyphenol network (MPN), are released sustainably after the incorporation within a gelatin cryogel. The released nanoparticles display a reduction in M1 macrophages by means of reactive oxygen species (ROS) elimination. Consequently, osteoclast maturation is also reduced, which is observed by the minimal formation of multinucleated cells (0.4%). Furthermore, the proportion of M2 macrophages, osteogenic differentiation, and angiogenic potential are consistently increased by the effects of magnesium from the nanoparticles. This orchestrated control of multiple systems influences the in vivo vascularized bone regeneration in which 80% of the critical-sized bone defect is regenerated with new bones with mature lamellar structure and arteriole-scale micro-vessels. Altogether, this study emphasizes the importance of the coordinated modulation of immune, osteogenic, and angiogenic systems at the bone defect site for robust bone regeneration.

Development of Plumeria alba extract supplemented biodegradable films containing chitosan and cellulose derived from bagasse and corn cob waste for antimicrobial food packaging

With the increase in global plastic pollution due to conventional plastic packaging (petroleum-derived), bioplastics have emerged as an alternative green source for practising a circular economy. This research aimed to extract cellulose from bagasse and corn cob waste and utilized in mixed form to prepare bioplastic film. The mixed cellulose was further reinforced with natural substances such as chitosan, bentonite, and P. alba extract. These newly developed bioplastics films were characterized by various physical tests like film thickness, moisture content, water solubility and spectroscopic techniques such as Fourier transform infrared (FTIR), scanning electron microscopy-energy dispersive spectroscopic (SEM-EDX), thermal gravimetric analysis (TGA), and ultraviolet-visible (UV-Vis) spectroscopy for opacity testing. The results revealed the enhanced bioplastic thermal and mechanical characteristics through robust interactions between cellulose and bentonite molecules. Moreover, incorporating chitosan solution as reinforcements in bio-composite films resulted in improved water barrier properties. The results indicated lower absorption in the UV range of 250-400 nm, attributed to the absence of UV-absorbing groups. Finally, their biodegradability was tested in soil, and 85.3 % weight loss of bioplastic films was observed after 50 days of the experiment which is the main task of this research. The antimicrobial properties of bioplastic films have been evaluated, and showed an inhibition zone of 16 mm against E. coli. After 12 days of incubation of sherbet berries, complete spoilage is identified in the control group compared to those covered with the bioplastic film. This outcome is attributed to the antioxidant and antimicrobial activities provided by chitosan and P. alba extract in the bioplastic film. The comprehensive outcomes of this study suggest the potential future adoption of these entirely bio-derived, environmentally sustainable and biodegradable bioplastic films as a viable substitute for the plastic packaging currently present in the market.

Characterization of multilayer bacterial cellulose-chitosan films loaded with grape bagasse antioxidant extract: Insights into spectral and water properties, microstructure, and antioxidant activity

This work explores the development and characterization of composite multilayer films comprising bacterial cellulose (BC) and chitosan enriched with antioxidant compounds from grape bagasse extract (GE) and glycerol. SEM images revealed a compact structure with successful interactions between BC and chitosan, confirmed by FT-IR analysis. Equilibrium moisture content, water vapor permeability (WVP), swollen capacity, and solubility were systematically investigated, unveiling the influence of glycerol and GE concentrations. Moisture content increased with elevated glycerol and GE levels, attributed to their hydrophilic nature. WVP rose with higher concentrations of hydrophilic compounds, affecting the films' permeability. Swollen capacity decreased, and solubility increased with the addition of GE and glycerol, indicating a more compact film structure. The incorporation of GE conferred antioxidant properties to the films, as evidenced by DPPH and ABTS+ assays, and Total Phenolic Content (TPC) determination. TPC values varied from 0 to 1.75 mg GAE/g dried film, depending on GE. Fourier Transform Infrared Spectroscopy (FT-IR) highlighted polymeric associations, and UV-Vis spectra demonstrated enhanced UV-blocking properties. Overall, these multilayer films offer promising applications in food packaging, leveraging natural antioxidant sources for an enhanced functionality.

Food applications of bioactive biomaterials based on gelatin and chitosan

Food packaging must guarantee the products' quality during the different operations including packing and maintenance throughout transportation and storage until to consumption. Thus, it should satisfy, both, food freshness and quality preservation and consumers health safety. Natural bio-sourced polymers have been explored as safe edible materials for several packaging applications, being interestingly carrier of bioactive substances, once added to improve films' properties. Gelatin and chitosan are among the most studied biomaterials for the preparation of edible packaging films due to their excellent characteristics including biodegradability, compatibility and film-forming property. These polymers could be used alone or in combination with other polymers to produce composite films with the desired physicochemical and mechanical properties. When incorporated with bioactive substances (natural extracts, polyphenolic compounds, essential oils), chitosan/gelatin-based films acquired various biological properties, including antioxidant and antimicrobial activities. The emerging bioactive composite films with excellent physical attributes represent excellent packaging alternative to preserve different types of foodstuffs (fruits, meat, fish, dairy products, …) and have shown great achievements. This chapter provides the main techniques used to prepare gelatin- and chitosan- based films, showing some examples of bioactive compounds incorporated into the films' matrix. Also, it illustrates the outstanding advantages given by these biomaterials for food preservation, when used as coating and wrapping agents.

Biodegradability Study of Modified Chitosan Films with Cinnamic Acid and Ellagic Acid in Soil

Currently, natural polymer materials with bactericidal properties are extremely popular. Unfortunately, although the biopolymer material itself is biodegradable, its enrichment with bactericidal compounds may affect the efficiency of biodegradation by natural soil microflora. Therefore, the primary objective of this study was to evaluate the utility of fungi belonging to the genus Trichoderma in facilitating the degradation of chitosan film modified with cinnamic acid and ellagic acid in the soil environment. Only two strains (T.07 and T.14) used chitosan films as a source of carbon and nitrogen. However, their respiratory activity decreased with the addition of tested phenolic acids, especially cinnamic acid. Addition of Trichoderma isolates to the soil increased oxygen consumption during the biodegradation process compared with native microorganisms, especially after application of the T.07 and T.14 consortium. Isolates T.07 and T.14 showed high lipolytic (55.78 U/h and 62.21 U/h) and chitinase (43.03 U/h and 41.27 U/h) activities. Chitinase activity after incorporation of the materials into the soil was higher for samples enriched with T.07, T.14 and the consortium. The isolates were classified as Trichoderma sp. and Trichoderma koningii. Considering the outcomes derived from our findings, it is our contention that the application of Trichoderma isolates holds promise for expediting the degradation process of chitosan materials containing bactericidal compounds.

UV- shielding and antioxidant properties of chitosan film impregnated with Acacia catechu modified with calcium carbonate for food packaging

Acacia catechu contains polyphenolic compounds such as catechin and tannins, which exhibit antioxidant and antimicrobial properties that have the potential to be used in food packaging applications. In this study, chitosan-based (CH) antioxidant films were developed with the incorporation of calcium carbonate (CC) and Acacia catechu (CT). The films were fabricated by the solvent-casting method, and the effects of the different concentrations of Acacia catechu were analyzed. The physicomechanical, antioxidant, and UV shielding properties of the films were determined. The addition of Acacia catechu and calcium carbonate has significantly increased the tensile from 2.30 MPa to 4.95 MPa, respectively, for neat CH and CH/CC/CT-4 film. At the same time, there is a reduction in the elongation at break from 26.75 % in neat CH film to 12.11 % in CH/CC/CT-4 film. The CH/CC/CT-4 film has shown the highest ferric-reducing antioxidant power (FRAP) of 0.440 mg Trolox/g dried weight of the film and 2,2 diphenyl picrylhydrazyl (DPPH) radical scavenging activity of 93.05 %. The UV transmittance of CH/CC/CT-4 film was 0.46 %, the lowest compared to the rest of the fabricated films. These active properties depict that CH/CC/CT-4 film has the potential to be utilized for the packaging of light and oxygen-sensitive food products.

Effect of chitosan-based bio coating on mechanical, structural and physical characteristics of microfiber based paper packaging: An alternative to wood pulp/plastic packaging

Limnocharis flava is a noxious aquatic weed that poses a threat to paddy cultivation. The high cellulose and low lignin contents in this plant make it a potential raw material for papermaking. Against this backdrop, this study was taken up to develop Limnocharis flava (LF) based sheets containing natural fibres from Banana (B), Pineapple (P), and Rice Straw (RS) as reinforcing agents. The influence of carboxymethyl cellulose (CMC) as a binder on the LF-based sheets was also studied. To enhance the mechanical and moisture resistance properties, a chitosan coating was provided to the sheets. Analytical tests for mechanical properties, water barrier properties, functional groups, structure and microstructure, thermal properties and biodegradability were performed. Among the samples, LF + B showed the highest tensile strength (34.86 Mpa) and bursting strength (13.055 kg/cm2), while LF + R had higher puncture and tearing strengths. Chitosan coating was found to enhance the sheets and improve the water barrier properties mechanically. The contact angle of LF + B increased from 91.6° to 110.65°, while the water vapour transmission rate of LF reduced from 532.18 to 404.47 on providing chitosan coating. The significant interactions of reinforcing agents were confirmed by the results of FTIR and that of the coating by the SEM micrographs. The LF-based sheets were also found to have decent thermal stability. The high value of the crystallinity index in LF + R samples supported their remarkable mechanical properties. This study proclaims the notable suitability of Limnocharis flava in manufacturing paper for packaging applications.

Novel electrospun nanofibers based on gelatin/oxidized xanthan gum containing propolis reinforced by Schiff base cross-linking for food packaging

Gelatin-based electrospun fibers are promising materials for food packaging but suffer from high hydrophilicity and weak mechanical properties. To overcome these limitations, in the current study, gelatin-based nanofibers were reinforced by using oxidized xanthan gum (OXG) as a crosslinking agent. The nanofibers' morphology was investigated through SEM, and the observations showed that the fibers' diameter was decreased by enhancing OXG content. The resultant fibers with more OXG content exhibited high tensile stress so the optimal sample obtained showed a tensile stress of 13.24 ± 0.76 MPa, which is up to 10 times more than neat gelatin fiber. Adding OXG to gelatin fibers reduced water vapor permeability, water solubility, and moisture content properties while increasing thermal stability and porosity. Additionally, the nanofibers containing propolis displayed a homogenous morphology with high antioxidant and antibacterial activities. In general, the findings suggested that the designed fibers could be used as a matrix for active food packaging.

Chitosan-Based Composites: Development and Perspective in Food Preservation and Biomedical Applications

Chitin, which may be the second-most common polymer after cellulose, is the raw material of chitosan. Chitosan has been infused with various plant extracts and subsidiary polymers to improve its biological and physiological properties. Chitosan's physicochemical properties are enhanced by blending, making them potential candidates that can be utilized in multifunctional areas, including food processing, nutraceuticals, food quality monitoring, food packaging, and storage. Chitosan-based biomaterials are biocompatible, biodegradable, low toxic, mucoadhesive, and regulate chemical release. Therefore, they are used in the biomedical field. The present manuscript highlights the application of chitosan-based composites in the food and biomedical industries.

Characterization of active Cerish fructan-sumac extract composite films: Physical, mechanical, and antioxidant properties

The biodegradable active films have the potential to increase the shelf life and safety of food products. In this study, the properties of Eremurus spectabilis (Cerish) root fructans (ESRF) film and its combination with Rhus coriaria L. (Sumac) extract (RCLE) at different concentrations (1%, 2%, 3%, and 4% w/w) were investigated. The Fourier transform infrared (FTIR) analysis determined the fingerprint region of fructans at 950-1150 cm^-1 in all spectrograms. RCLE increased the interactions between the hydroxyl groups and the formation of intermolecular bonds in composite films. Elongation-at-break (EAB) and tensile strength (TS) did not change significantly. However, RCLE increased Young's modulus (YM) (p ˂ .05), thermal stability, and crystallinity of composite films. RCLE also increased the film thickness and decreased the water content, solubility, and swelling degree significantly. RCLE improved the reducing ability and free radical-scavenging activity of composite films. Present results indicated that the ESRF/RCLE films were the protective barriers to the permeability of water vapor. The incorporation of RCLE increased the surface hydrophobicity and caused the composite film microstructure to become uniform and more compact. Overall, the Sumac extract at the specific concentration of 3% can be used to improve the Cerish fructans film properties and extend the product's shelf life in active food packaging.

Study on electrospinning of wheat gluten: A review

Electrospinning has attracted extensive attention among various nanofabrication technologies owing to its ability to produce nanofiber structures with unique properties, such as high specific surface area and porosity, as well as tunable fiber morphology and mechanical properties. The most representative spinning raw materials include natural polymers and synthetic polymers. Owing to the sustainable development strategies, more and more researchers focus on natural polymers. Among natural polymers, wheat gluten (WG) nanofibers have recently attracted much attention owing to its high specific surface area, superior biocompatibility, and unique viscoelasticity. This review summarizes the composition and characteristics of WG, the physical and chemical indicators of a WG electrospinning solution, the main influencing factors in the WG electrospinning process and a characterizations of WG nanofibers. Finally, the review also outlines the applications of WG nanofibers in drug release, biological scaffold, and active food packaging.

Chitosan-Coated Niosomes Loaded with Ellagic Acid Present Antiaging Activity in a Skin Cell Line

The polyphenol compound ellagic acid (EA) extracted from pomegranate has potential bioactivity against different types of chronic diseases. Skin aging is a long-term physiological process caused by many environmental factors, the most important of which is exposure to sun ultraviolet (UV) radiation. UV-induced chronic photodamage of the skin results in extrinsic aging. This study aimed to evaluate the photoprotective effects of EA on the human fibroblast skin cell line HFB4 and investigate its capacity to protect collagen from UV-induced deterioration. EA was encapsulated into chitosan-coated niosomes to reduce the skin aging effect of UV radiation in vitro. The tested formulations (niosomes loaded with EA and chitosan-coated niosomes loaded with EA) were characterized using transmission electron microscopy, dynamic light scattering, and scanning electron microscopy. Furthermore, the in vitro release of EA was determined. The HFB4 cell line samples were split into five groups: control, UV, UV-EA, UV-NIO-EA, and UV-CS-NIO-EA. UV irradiation was applied to the cell line groups via a UV-emitting lamp for 1 h, and then cell viability was measured for each group. The expression of genes implicated in skin aging (Co1A1, TERT, Timp3, and MMP3) was also assessed to quantify the impact of the loaded EA. The findings showed that EA-loaded chitosan-coated niosomes improved cell survival, upregulated Col1A1, TERT, and Timp3 genes, and downregulated MMP3. Thus, nanoparticles encapsulating EA are potent antioxidants that can preserve collagen levels and slow down the aging process in human skin.

Egyptian propolis extract for functionalization of cellulose nanofiber/poly(vinyl alcohol) porous hydrogel along with characterization and biological applications

Bee propolis is one of the most common natural extracts and has gained significant interest in biomedicine due to its high content of phenolic acids and flavonoids, which are responsible for the antioxidant activity of natural products. The present study report that the propolis extract (PE) was produced by ethanol in the surrounding environment. The obtained PE was added at different concentrations to cellulose nanofiber (CNF)/poly(vinyl alcohol) (PVA), and subjected to freezing thawing and freeze drying methods to develop porous bioactive matrices. Scanning electron microscope (SEM) observations displayed that the prepared samples had an interconnected porous structure with pore sizes in the range of 10-100 μm. The high performance liquid chromatography (HPLC) results of PE showed around 18 polyphenol compounds, with the highest amounts of hesperetin (183.7 µg/mL), chlorogenic acid (96.9 µg/mL) and caffeic acid (90.2 µg/mL). The antibacterial activity results indicated that both PE and PE-functionalized hydrogels exhibited a potential antimicrobial effects against Escherichia coli, Salmonella typhimurium, Streptococcus mutans, and Candida albicans. The in vitro test cell culture experiments indicated that the cells on the PE-functionalized hydrogels had the greatest viability, adhesion, and spreading of cells. Altogether, these data highlight the interesting effect of propolis bio-functionalization to enhance the biological features of CNF/PVA hydrogel as a functional matrix for biomedical applications.

Effects and impacts of technical processing units on the nutrients and functional components of fruit and vegetable juice

Fruit and vegetable juice (FVJ) has become a favorite beverage for all age groups because of its excellent sensory and nutritional qualities. FVJ has a series of health benefits such as antioxidant, anti-obesity, anti-inflammatory, anti-microbial and anti-cancer. Except for raw materials selection, processing technology and packaging and storage also play a vital role in the nutrition and functional components of FVJ. This review systematically reviews the important research results on the relationship between FVJ processing and its nutrition and function in the past 10 years. Based on the brief elucidation of the nutrition and health benefits of FVJ and the unit operation involved in the production process, the influence of a series of key technology units, including pretreatment, clarification, homogenization, concentration, sterilization, drying, fermentation and packaging and storage, on the nutritional function of FVJ was systematically expounded. This contribution provides an update on the impacts of technical processing units on the nutrients and functional components of FVJ and new perspectives for future studies.

Food packaging composite film based on chitosan, natural kaolinite clay, and Ficus. carica leaves extract for fresh-cut apple slices preservation

The problem of environmental plastic contamination is one of the most serious issues facing our world today. The majority of the packaging materials used to preserve food are made of plastic which is considered an environmental issue. Natural kaolinite clay (KC) and Ficus leaf extract (FLE) were combined with chitosan in this work to create a novel antioxidant and biodegradable food packaging film. Chitosan/KC/FLE film was compared to chitosan film, Chitosan/KC, and Chitosan/FLE films in terms of structural, physical, and functional aspects. The addition of FLE and/or KC significantly improved the light and moisture barrier characteristics, mechanical properties, and antioxidant capabilities of chitosan film. Moreover, KC addition had a remarkable impact on the water vapor permeability and the biodegradability of the chitosan film. Because of the synergistic action of FLE and KC, the Chitosan/KC/FLE film delivered strong barrier and antioxidant capabilities. Furthermore, Chitosan/KC/FLE film was tested as packaging material on fresh-cut apple slices and demonstrated good food preservation regarding the weight loss, browning index, and total phenolic content of the fruit. According to our findings, Chitosan/KC/FLE film might be employed as a possible food packaging material in the food industry.

The Application of Phenolic Acids in The Obtainment of Packaging Materials Based on Polymers-A Review

This article provides a summarization of present knowledge on the fabrication and characterization of polymeric food packaging materials that can be an alternative to synthetic ones. The review aimed to explore different studies related to the use of phenolic acids as cross-linkers, as well as bioactive additives, to the polymer-based materials upon their application as packaging. This article further discusses additives such as benzoic acid derivatives (sinapic acid, gallic acid, and ellagic acid) and cinnamic acid derivatives (p-coumaric acid, caffeic acid, and ferulic acid). These phenolic acids are mainly used as antibacterial, antifungal, and antioxidant agents. However, their presence also improves the physicochemical properties of materials based on polymers. Future perspectives in polymer food packaging are discussed.

Processing, Characterization and Disintegration Properties of Biopolymers Based on Mater-Bi® and Ellagic Acid/Chitosan Coating

Among the most promising synthetic biopolymers to replace conventional plastics in numerous applications is MaterBi^® (MB), a commercial biodegradable polymer based on modified starch and synthetic polymers. Actually, MB has important commercial applications as it shows interesting mechanical properties, thermal stability, processability and biodegradability. On the other hand, research has also focused on the incorporation of natural, efficient and low-cost active compounds into various materials with the aim of incorporating antimicrobial and/or antioxidant capacities into matrix polymers to extend the shelf life of foods. Among these is ellagic acid (EA), a polyphenolic compound abundant in some fruits, nuts and seeds, but also in agroforestry and industrial residues, which seems to be a promising biomolecule with interesting biological activities, including antioxidant activity, antibacterial activity and UV-barrier properties. The objective of this research is to develop a film based on commercial biopolymer Mater-Bi^® (MB) EF51L, incorporating active coating from chitosan with a natural active compound (EA) at two concentrations (2.5 and 5 wt.%). The formulations obtained complete characterization and were carried out in order to evaluate whether the incorporation of the coating significantly affects thermal, mechanical, structural, water-vapor barrier and disintegration properties. From the results, FTIR analysis yielded identification, through characteristic peaks, that the type of MB used is constituted by three polymers, namely PLA, TPS and PBAT. With respect to the mechanical properties, the values of tensile modulus and tensile strength of the MB-CHI film were between 15 and 23% lower than the values obtained for the MB film. The addition of 2.5 wt.% EA to the CHI layer did not generate changes in the mechanical properties of the system, whereas a 5 wt.% increase in ellagic acid improved the mechanical properties of the CHI film through the addition of natural phenolic compounds at high concentrations. Finally, the disintegration process was mainly affected by the PBAT biopolymer, causing the material to not disintegrate within the times indicated by ISO 20200.

Chitosan with Natural Additives as a Potential Food Packaging

Recently, the development of materials based on natural polymers have been observed. This is the result of increasing environmental degradation, as well as increased awareness and consumer expectations. Many industries, especially the packaging industry, face challenges resulting from legal regulations. Chitin is the most common biopolymer right after cellulose and is used to produce chitosan. Due to the properties of chitosan, such as non-toxicity, biocompatibility, as well as antimicrobial properties, chitosan-based materials are used in many industries. Many studies have been conducted to determine the suitability of chitosan materials as food packaging, and their advantages and limitations have been identified. Thanks to the possibility of modifying the chitosan matrix by using natural additives, it is possible to strengthen the antioxidant and antimicrobial activity of chitosan films, which means that, in the near future, chitosan-based materials will be a more environmentally friendly alternative to the plastic packaging used so far. The article presents literature data on the most commonly used natural additives, such as essential oils, plant extracts, or polysaccharides, and their effects on antimicrobial, antioxidant, mechanical, barrier, and optical properties. The application of chitosan as a natural biopolymer in food packaging extends the shelf-life of various food products while simultaneously reducing the use of synthetic plastics, which in turn will have a positive impact on the natural environment. However, further research on chitosan and its combinations with various materials is still needed to extent the application of chitosan in food packaging and bring its application to industrial levels.

Chitosan Edible Films and Coatings with Added Bioactive Compounds: Antibacterial and Antioxidant Properties and Their Application to Food Products: A Review

Chitosan is the deacetylated form of chitin regarded as one of the most abundant polymers and due to its properties, both chitosan alone or in combination with bioactive substances for the production of biodegradable films and coatings is gaining attention in terms of applications in the food industry. To enhance the antimicrobial and antioxidant properties of chitosan, a vast variety of plant extracts have been incorporated to meet consumer demands for more environmentally friendly and synthetic preservative-free foods. This review provides knowledge about the antioxidant and antibacterial properties of chitosan films and coatings enriched with natural extracts as well as their applications in various food products and the effects they had on them. In a nutshell, it has been demonstrated that chitosan can act as a coating or packaging material with excellent antimicrobial and antioxidant properties in addition to its biodegradability, biocompatibility, and non-toxicity. However, further research should be carried out to widen the applications of bioactive chitosan coatings to more foods and industries as well was their industrial scale-up, thus helping to minimize the use of plastic materials.

Phenolic Compounds in Active Packaging and Edible Films/Coatings: Natural Bioactive Molecules and Novel Packaging Ingredients

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products.

Fabrication of Chitosan/Hydroxyethyl Cellulose/TiO2 Incorporated Mulberry Anthocyanin 3D-Printed Bilayer Films for Quality of Litchis

In this study, a bilayer antibacterial chromogenic material was prepared using chitosan (CS) and hydroxyethyl cellulose (HEC) as inner substrate, mulberry anthocyanins (MA) as a natural tracer, and titanium dioxide nanoparticles (nano-TiO₂)/CS:HEC as a bacteriostatic agent for the outer layer. By investigating their apparent viscosity and suitability for 3D printing links, the optimal ratio of the substrates was determined to be CS:HEC = 3:3. Viscosity of the CH was moderate. The printing process was consistent and exhibited no breakage or clogging. The printed image was highly stable and not susceptible to collapse and diffusion. Scanning electron microscopy and infrared spectroscopy indicated that intermolecular binding between the substances exhibited good compatibility. Titanium dioxide nanoparticles (nano-TiO₂) were evenly distributed in the CH and no agglomeration was observed. The inner film fill rates affected the overall performance of the chromogenic material, with strong inhibitory effects against Escherichia coli and Staphylococcus aureus at different temperatures, as well as strong color stability. The experimental results indicated that the double-layer antibacterial chromogenic material can, to a certain extent, extend the shelf life of litchi fruit and determine the extent of its freshness. Therefore, from this study, we can infer that the research and development of active materials have a certain reference value.

Optimization of Antibacterial, Physical and Mechanical Properties of Novel Chitosan/Olibanum Gum Film for Food Packaging Application

Chitosan-based films are promising active biodegradable materials with the ability to be enhanced by different materials, including gums. This study aims to optimize the physical (transmittance, water vapor permeability and water solubility), mechanical (tensile strength and elongation at break) and antibacterial (against Staphylococcus aureus and Salmonella Typhimurium) properties of newly fabricated chitosan/olibanum gum (CH/OG) films as a function of different levels of CH (0.5, 0.75, 1, 1.25 and 1.5% w/v) and OG (0.125, 0.25, 0.375, 0.5 and 0.625% w/v), using response surface methodology (RSM). Moreover, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and differential scanning calorimetry (DSC) were used to better characterize the fabricated films. RSM analysis results showed the significant fitting of all dependent variable responses to the quadratic polynomial model. To attain the desirable physical, mechanical and antibacterial responses, the optimal concentrations were 1.31% (w/v) CH and 0.3% (w/v) OG. The encouraging antibacterial, physical and mechanical properties of the developed composites support the application of chitosan/gum blends in active food packaging, particularly for perishable foodstuffs, such as meat and horticultural products.

From Regenerated Wood Pulp Fibers to Cationic Cellulose: Preparation, Characterization and Dyeing Properties

The global demand for sustainable textile fibers is growing and has led to an increasing research interest from both academia and industry to find effective solutions. In this research, regenerated wood pulp fibers were functionalized with glycidyltrimethylammonium chloride (GTAC) to produce modified regenerated cellulose with cationic pending groups for improved dye uptake. The resultant cationic cellulose with a degree of substitution (DS) between 0.13 and 0.33 exhibited distinct morphologies and contact angles with water ranging from 65.7° to 82.5° for the fibers with DS values of 0.13 and 0.33, respectively. Furthermore, the thermal stability of the modified regenerated cellulose fibers, albeit lower than the pristine ones, reached temperatures up to 220 °C. Additionally, the modified fibers showed higher dye exhaustion and dye fixation values than the non-modified ones, attaining maxima values of 89.3% ± 0.9% and 80.6% ± 1.3%, respectively, for the cationic fibers with a DS of 0.13. These values of dye exhaustion and dye fixation are ca. 34% and 77% higher than those obtained for the non-modified fibers. Overall, regenerated wood pulp cellulose fibers can be used, after cationization, as textiles fiber with enhanced dye uptake performance that might offer new options for dyeing treatments.

Formulation of Fast Dissolving β-Glucan/Bilberry Juice Films for Packaging Dry Powdered Pharmaceuticals for Diabetes

The aim of this study was to develop fast dissolving films based on β-glucan and bilberry juice due to the bioactive potential of β-glucan and antidiabetic effect of bilberry juice. The benefit of incorporation of bioactive compounds into the films is due to the removal of unnecessary excipients and to confer protection as well as increase stability and shelf life to the packaged product. Due to the fast dissolving requirements of the European Pharmacopeia, which reduced the dissolution time from 180 to 60 s, indicating less than a minute, hygroscopic materials, such as sodium alginate and a suitable plasticizer, such as glycerin were incorporated. Moreover, the influence of ingredients and surfactants, such as soybean oil was studied in the design of fast dissolving films. Additionally, the steady state rate water vapor transmission rate (WVTR), water vapor permeability (WVP), and FT-IR spectroscopy tests were performed at high resolution to ensure the reliability of the films and composition as well as to validate the results. Our data suggest that the addition of surfactants contributed to the development of fast dissolving films without influencing the diffusion of water vapor. Low levels of WVTR and short dissolution time made from β-glucan and bilberry juice are a convenient candidate for packaging dry powdered pharmaceuticals for diabetes.

Fabrication and characterization of pullulan-based composite films incorporated with bacterial cellulose and ferulic acid

Pullulan-based composite films incorporated with bacterial cellulose (BC) and ferulic acid (FA) were prepared by solution casting method. The rheological, morphological, barrier, optical, anti-fogging, and antioxidant properties of pullulan-based composite films doped with BC and FA were investigated. The rheological results showed that all film-forming solution was pseudoplastic fluid and its viscosity increased with the increase of BC content. An appropriate BC (2 %) and FA were uniformly dispersed in pullulan to form uniform and dense composite films. With the increase of BC content, the roughness and opacity of composite films increased while their UV-vis barrier performance was improved by incorporating BC and FA. Fourier transform infrared spectrometer analysis demonstrated that hydrogen bond interactions among pullulan, BC, and FA were found, and incorporating BC could increase the crystallinity of the composite films, thus enhancing their mechanical, barrier, hydrophobic, and thermal stability properties. Pullulan-based composite films incorporated with 2 % BC and FA (P-BC2-FA) showed better mechanical properties, water, oxygen, and carbon dioxide barrier performances, and its water contact angle value also increased compared with control, respectively. P-BC2-FA film showed superior anti-fogging and antioxidant activities. These results indicate that the P-BC2-FA film are expected to be a potential target of bioactive packaging.

Levan-chitosan blend films: Preparation, structural, physical properties and application in pork packaging

Conventional fossil fuel-based packaging materials often brings of food safety and serious environmental pollution. It is significant to develop an environmentally-friendly packaging material. In this work, a levan-chitosan (LE/CS) blend film was fabricated via the solution casting method. The films were evaluated by Fourier transform infrared spectroscopy and X-ray diffraction, indicating the formation of hydrogen bonds between chitosan and levan. The mechanical properties of LE/CS films demonstrated a mechanical strength higher than CS films, and the best tensile strength appeared at a ratio of LE/CS (1:1) up to 18.78 ± 0.73 MPa. The addition of levan caused a significant increase in absorption of UV light with a reduction in swelling water of the blend films from 29.13 ± 0.53 % of chitosan film to 2.07 ± 0.27 % of LE/CS (1:1) film. A higher contact angle and lower WVP were observed for LE/CS blend films. LE/CS blend films were then used as packaging material for fresh pork and were well maintained the qualities. The study suggested that the new blend film might have a good prospect as a food packaging material.

Poly (lactic acid)-based pH responsive membrane combined with chitosan and alizarin for food packaging

A poly (lactic acid) (PLA) -based functional partition composite membrane (PLA/CA) containing chitosan (CS) and alizarin (AL) was designed by solution casting method. The PLA/CA membrane contains the antibacterial zone of the edge part (PLA/CS) and the pH response detection zone of the central part (PLA/AL). At the same time, the environmentally friendly plasticizer tributyl citrate (TBC) was added to make the prepared PLA/CA composite membrane have good flexibility and high transparency. The results of FE-SEM and FTIR showed that CS and AL were uniformly dispersed in PLA matrix and had good compatibility with PLA. The antioxidant activities of PLA/CS and PLA/AL composite films were 43.3 % and 72.8 %, respectively. At the same time, the inhibitory rates of PLA/CS membrane against Escherichia coli and Staphylococcus aureus were as high as 87.91 % and 75.17 %, respectively. PLA/AL films exhibit excellent UV barrier properties. When the environmental pH (ammonia and acetic acid vapor) changed repeatedly, the PLA/AL membrane showed reversible color change of yellow under acidic condition and purple under alkaline condition. During the packaging and storage of chicken breast meat, the freshness of chicken breast meat can be detected by the color change of functional PLA/CA composite membrane.

Preparation of an Antimicrobial and Antioxidant Bio-Polymer Film and Its Application as Glazing Shell for Postharvest Quality of Fresh-Cut Apple

The aim of this work is to glazing a modified bio-polymer shell as substitute of peel to keep the postharvest quality of fresh-cut fruits. In this study, chitosan as backbone of the shell was modified by addition of the functional extracts obtained from Zanthoxylum, in which 12 kinds of main identified bio-active components consisted of over 55% of the total extracts. The introduction of the extracts improved physic and mechanical properties of the shell, and endowed it with significant antimicrobial and antioxidant activity. Accordingly, the modified chitosan was used as the substitute of peel to preserve fresh-cut apples. Results exhibited that such treatments obviously delayed the decline process of overall postharvest quality of the preserved apple samples throughout all the storage period, represented by the variations in physical, chemical, and microbial properties of the apple samples were significantly inhibited. The overall observations revealed promising potential of the bio-polymer shell in food application.

A Review on Biodegradable Packaging Films from Vegetative and Food Waste

Plastics around the globe have been a matter of grave concern due to the unavoidable habits of human mankind. Taking waste statistics in India for the year 2019-20 into account, the data of 60 major cities show that the generation of plastic waste stands tall at around 26,000 tonnes/day, of which only about 60 % is recycled. A majority of the non-recycled plastic waste is petrochemical-based packaging materials that are non-biodegradable in nature. Vegetative/food waste is another global issue, evidenced by vastly populated countries such as China and India accounting for 91 and 69 tonnes of food wastage, respectively in 2019. The mitigation of plastic packaging issues has led to key scientific developments, one of which is biodegradable materials. However, there is a way that these two waste-related issues can be fronted as the analogy of "taking two shots with the same arrow". The presence of various bio-compounds such as proteins, cellulose, starch, lipids, and waxes, etc., in food and vegetative waste, creates an opportunity for the development of biodegradable packaging films. Although these flexible packaging films have limitations in terms of mechanical, permeation, and moisture absorption characteristics, they can be fine-tuned in order to convert the biobased raw material into a realizable packaging product. These strategies could work in replacing petrochemical-based non-biodegradable packaging plastics which are used in enormous quantities for various household and commercial packaging applications to combat the ever-increasing pollution in highly populated countries. This paper presents a systematic review based on modern scientific tools of the literature available with a major emphasis on the past decade and aims to serve as a standard resource for the development of biodegradable packaging films from food/vegetative waste.

The bioactivity and applications of pomegranate peel extract: A review

Pomegranate peel (PP) is a by-product in the processing of pomegranate products, which is usually discarded as a waste. However, a large number of researches have shown that pomegranate peel extract (PPE) is rich in a variety of phenolic substances, among which ellagic acid (EA), as one of the main active components, has significant biological activities, such as anti-oxidation, anti-tumor, anti-inflammatory, neuroprotection, anti-viral, and anti-bacterial. We analyzed the mechanism of EA's biological activity, and discussed its application in the food industry, for instance, food preservation, food additives, and functional foods. Combined with the research status of PPE, we discussed the limitations and development potential of PPE, in order to provide theoretical reference and scientific basis for the development and utilization of pomegranate by-products. PRACTICAL APPLICATIONS: Pomegranate peel (PP), the inedible part of the fruit, is usually treated as waste. In recent years, researchers have been committed to exploring various bioactive ingredients in PP and exploring its potential benefits to human health, which has far-reaching significance. In this paper, the chemical constituents of polyphenols in PP were reviewed, mainly focusing on the biological activity and mechanism of ellagic acid (EA). We reviewed the applications and invention patents of pomegranate peel extract (PPE) in food field, including food preservation, food additive, and functional foods, providing reference for the recycling and reuse of PP.

Flavor, antimicrobial activity and physical properties of gelatin film incorporated with of ginger essential oil

Adding essential oil into the gelatin-based film can enhance the antibacterial activity of the film, but excessive amounts of addition will bring the film an unpleasant flavor and reduce its mechanical performance. Hence, we prepared functional gelatin-based films by incorporating low content of ginger essential oil (GEO). The flavor of GEO was not detected from the films containing less than 1% GEO. The antimicrobial activity of films was found to be proportional to GEO content. As GEO content increased from 0 to 1%, the value of water vapor permeability (WVP) and elongation at break (EAB) increased, whereas the value of tensile strength (TS) of film decreased. The Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy analysis revealed the vibration of gelatin film was affected by adding low content of essential oil. Surface morphologies demonstrated oil droplets and a discontinuous structure, and cross-section morphologies proved the formation of a loose structure as GEO was incorporated in the film through SEM. Sensory evaluation revealed that composite films incorporated with 0.5% GEO exhibited the best performance. The resulting films can be used as antimicrobial packaging materials with good physical properties and sensory performance.

Electrosprayed chitosan-coated alginate-pectin beads as potential system for colon-targeted delivery of ellagic acid

BACKGROUND

Ellagic acid (EA), a potent dietary antioxidant, has limited bioavailability owing to its rapid absorption in the stomach and small intestine, and EA is transformed to more bioavailable compounds - urolithins - in the colon. An encapsulation system that sustains the release of EA in the gastrointestinal system and delivers more EA into the colon could improve the oral bioavailability of EA. Electrosprayed EA-loaded alginate-pectin beads were produced and coated with low- (LC) and high-molecular-weight chitosan (HC). The EA release from uncoated and coated beads under simulated gastrointestinal conditions was evaluated. The samples were characterized by particle size, gel strength, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analysis.

RESULTS

The encapsulation efficiency (EE%) of EA ranged from 49.53% to 69.85% for uncoated beads, which was elevated up to 86.50% by coating, and LC coating provided higher EE%. Pectin addition to alginate and chitosan coating reduced the gel strength and changed the size depending on the molecular weight of chitosan. SEM images of pectin-added beads showed fewer cracks but more wrinkles, and chitosan coating presented more aggregated surfaces. The ionic interaction of alginate-pectin-chitosan and the entrapment of EA were confirmed by FTIR. In the gastric medium, EA release was very low from uncoated beads (15.2-19.8%), and totally restricted by chitosan coating. In the intestinal stage, EA release from LC-coated alginate-pectin beads was only 18%, and it was between 55% and 65% for uncoated or HC-coated counterparts.

CONCLUSION

The LC-coated alginate-pectin beads could be further explored as a potential system for colon-targeted delivery of EA. © 2021 Society of Chemical Industry.

Natural Polymers-Based Materials: A Contribution to a Greener Future

Natural polymers have emerged as promising candidates for the sustainable development of materials in areas ranging from food packaging and biomedicine to energy storage and electronics. In tandem, there is a growing interest in the design of advanced materials devised from naturally abundant and renewable feedstocks, in alignment with the principles of Green Chemistry and the 2030 Agenda for Sustainable Development. This review aims to highlight some examples of the research efforts conducted at the Research Team BioPol4fun, Innovation in BioPolymer-based Functional Materials and Bioactive Compounds, from the Portuguese Associate Laboratory CICECO–Aveiro Institute of Materials at the University of Aveiro, regarding the exploitation of natural polymers (and derivatives thereof) for the development of distinct sustainable biobased materials. In particular, focus will be given to the use of polysaccharides (cellulose, chitosan, pullulan, hyaluronic acid, fucoidan, alginate, and agar) and proteins (lysozyme and gelatin) for the assembly of composites, coatings, films, membranes, patches, nanosystems, and microneedles using environmentally friendly strategies, and to address their main domains of application.

Development of multifunctional food packaging films based on waste Garlic peel extract and Chitosan

A sustainable multifunctional food packaging composite film containing waste garlic peel extract (GPE) and Chitosan (CH) was prepared. This film exhibited antimicrobial potential towards Staphylococcus aureus and Klebsiella pneumoniae. GPE/CH films' morphological, physical, and functional properties were compared to those of CH film. Fourier transform infrared showed the interactions through hydrogen bonding between CH and GPE in the blends that improved the polymers' compatibility. Furthermore, X-ray diffraction analysis validated the compatibility between GPE and CH. GPE/CH films exhibited higher thickness and moisture content than the CH film. Remarkably, GPE/CH films showed lower water vapor barrier properties and higher ultra-violet protection and mechanical strength than CH film. Compact surfaces of the GPE infused CH films were unveiled through Scanning electron microscopy. GPE/CH film showed improved thermal stability after the addition of GPE. MTT method's cytotoxicity study manifested that the GPE/CH films are antioxidant and non-cytotoxic, implicating their biocompatibility and non-toxicity. The results suggest that GPE/CH films can find widespread commercial applications like food packaging materials, replacing the commonly used petrochemical plastics.

Application of Encapsulation Technology in Edible Films: Carrier of Bioactive Compounds

Nutraceuticals, functional foods, immunity boosters, microcapsules, nanoemulsions, edible packaging, and safe food are the new progressive terms, adopted to describe the food industry. Also, the rising awareness among the consumers regarding these has created an opportunity for the food manufacturers and scientists worldwide to use food as a delivery vehicle. Packaging performs a very imminent role in the food supply chain as well as it is a consequential part of the process of food manufacturing. Edible packaging is a swiftly emerging art of science in which edible biopolymers like lipids, polysaccharides, proteins, resins, etc. and other consumable constituents extracted from various non-conventional sources like microorganisms are used alone or imbibed together. These edible packaging are indispensable and are meant to be consumed with the food. This shift in paradigm from traditional food packaging to edible, environment friendly, delivery vehicles for bioactive compounds have opened new avenues for the packaging industry. Bioactive compounds imbibed in food systems are gradually degenerated, or may change their properties due to internal or external factors like oxidation reactions, or they may react with each other thus reducing their bioavailability and ultimately may result in unacceptable color or flavor. A combination of novel edible food-packaging material and innovative technologies can serve as an excellent medium to control the bioavailability of these compounds in food matrices. One promising technology for overcoming the aforesaid problems is encapsulation. It can be used as a method for entrapment of desirable flavors, probiotics, or other additives in order to apprehend the impediments of the conventional edible packaging. This review explains the concept of encapsulation by exploring various encapsulating materials and their potential role in augmenting the performance of edible coatings/films. The techniques, characteristics, applications, scope, and thrust areas for research in encapsulation are discussed in detail with focus on development of sustainable edible packaging.

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

While antioxidants are widely known as natural components of healthy food and drinks or as additives to commercial polymer materials to prevent their degradation, recent years have seen increasing interest in enhancing the antioxidant functionality of newly developed polymer materials and coatings. This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, including bulk films, electrospun fibers, and self-assembled coatings. Polyphenolic antioxidant moieties with varied molecular architecture are in the focus of this Review, because of their abundance, nontoxic nature, and potent antioxidant activity. Polymer materials with integrated polyphenolic functionality offer opportunities and challenges that span from the fundamentals to their applications. In addition to the traditional blending of antioxidants with polymer materials, developments in surface grafting and assembly via noncovalent interaction for controlling localization versus migration of antioxidant molecules are discussed. The versatile chemistry of polyphenolic antioxidants offers numerous possibilities for programmed inclusion of these molecules in polymer materials using not only van der Waals interactions or covalent tethering to polymers, but also via their hydrogen-bonding assembly with neutral molecules. An understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials that are critical in food packaging, biomedical, and environmental applications.