Complexation between flaxseed protein isolate and phenolic compounds: Effects on interfacial, emulsifying and antioxidant properties of emulsions

High-pressure microfluidization enhanced the stability of sodium caseinate-EGCG complex-stabilized fish oil emulsion

Improving the emulsion-stabilizing effect of protein by chemical or physical modification has been paid much attention recently. Here, sodium caseinate (CS) was treated by high-pressure-microfluidization (HPM) under 0-100 MPa, and was further complexed with (-)-epigallocatechin-3-gallate (EGCG) to form an excellent emulsifier that stabilized fish oil emulsions. Results showed that HPM treatment (especially 80 MPa) significantly changed the secondary structure of CS, and 80 MPa-PCS-EGCG had the best emulsifying and antioxidant activities. In addition, after HPM treatment and EGCG bonding, CS formed a thicker interface layer on the surface of oil droplets, which could better protect the fish oil from the influence by oxygen, temperature and ion concentration. Moreover, the fish oil emulsion stabilized by PCS-EGCG complex significantly delayed the release of free fatty acids subjected to in vitro digestion. Conclusively, HPM-treated CS-EGCG complex could be a potential emulsifier to improve the stability of fish oil emulsions.

Multilayer microparticles for programmed sequential release of phenolic compounds from Eugenia stipitata: Stability and bioavailability

A co-delivery system based on multilayer microparticles was developed and characterized for the sequential release of phenolic compounds (PCs) using different encapsulation processes (spray drying: SD and drying-chilling spray: SDC) and wall materials to improve the stability and bioavailability of PCs. Samples were characterized in terms of process yield (PY%), phenolic retention efficiency (PRE%), chemical structure and crystallinity (NMR, FTIR, DXR), thermal stability (DSC and FT-IR), anti-radical capacity (ORAC and ABTS) and in vitro digestion. PRE% of samples by SD were higher (p < 0.05) than SDC due to the formation of PCs from CRF (cará-roxo flour). NMR, FTIR, DXR confirmed the presence of key components and interactions for the formation of the advanced co-delivery system. The SDC particles showed crystalline regions by XRD and were stable at ∼47 °C. All samples showed good release of PC in the intestinal phase, and antiradical capacity that reached 23.66 µmol TE g-1.

Techno-Functions and Safety Concerns of Plant-Based Peptides in Food Matrices

Plant-based peptides (PBPs) benefit functional food development and environmental sustainability. Proteolysis remains the primary method of peptide production because it is a mild and nontoxic technique. However, potential safety concerns still emanate from toxic or allergenic sequences, amino acid racemization, iso-peptide bond formation, Maillard reaction, dose usage, and frequency. The main aim of this review is to investigate the techno-functions of PBPs in food matrices, as well as their safety concerns. The distinctive characteristics of PBPs exhibit their techno-functions for improving food quality and functionality by contributing to several crucial food formulations and processing. The techno-functions of PBPs include solubility, hydrophobicity, bitterness, foaming, oil-binding, and water-holding capacities, which subsequently affect food matrices. The safety and quality of foodstuff containing PBPs depend on the proper source of plant proteins, the selection of processing approaches, and compliance with legal regulations for allergen labeling and safety evaluations. The safety concerns in allergenicity and toxicity were discussed. The conclusion is that food technologists must apply safe limits and consider potential allergenic components generated during the development of food products with PBPs. Therefore, functional food products containing PBPs can be a promising strategy to provide consumers with wholesome health benefits.

Effects of catechin on the stability of myofibrillar protein-soybean oil emulsion and the adsorbed properties of myosin at the oil-water interface

The effects of different concentrations of catechin on the stability of myofibrillar protein-soybean oil emulsions and the related mechanisms were investigated. Adding 10 μmol/g catechin had no obvious effects on the emulsion stability and myosin structure, but 50, 100 and 200 μmol/g catechin decreased the emulsion stability. The microstructure observations showed that 10 μmol/g catechin caused a dense and uniform emulsion to form, whereas 50, 100 and 200 μmol/g catechin induced the merging of oil droplets. The addition of 50, 100 and 200 μmol/g catechin caused a decline in both the total sulfhydryl content and surface hydrophobicity, suggesting protein aggregation, which decreased the adsorption capacity of myosin and the elasticity of interfacial film. These results suggested that higher concentrations of catechin were detrimental to the emulsifying properties of myosin and that the dose should be considered when it is used as an antioxidant.

Characterization and molecular docking of sustainable wine lees and gelatin-based emulsions: innovative fat substitution

BACKGROUND

The present study aimed to determine how various amounts (0.00, 0.58, 1.52 and 4.50 g 100 g-1) of wine lees (WL), which contains numerous essential components, impact the emulsifying properties of fish gelatin (FG) at a low concentration (0.5 g 100 g-1) in the high-fat phase (65 g 100 g-1). This study conducted rheology, physicochemical technical and characterization analyses on the emulsions to provide sustainable and innovative approaches for spreadable oils.

RESULTS

The addition of WL to FG emulsions improved oxidative stability, emulsion stability and bioactive compounds. The zeta potential (-101 ± 5.62 mV) of 0.58 g 100 g-1 WL-containing emulsion (PE1) was found to be high, whereas particle size (347.6 ± 5.25 nm) and polydispersity index (0.50) were statistically low. It was also found that the addition of WL improved the intermolecular interactions, crystallinity and microstructural properties of the emulsions. All these results were supported by simulating the molecular configuration between FG and WL. The compounds gallic acid, caffeic acid, myricetin, quercetin and resveratrol showed a strong affinity to FG, with free binding energies of -5.50, -5.88, -6.53, -6.68 and -6.66 kcal mol-1, respectively.

CONCLUSION

As a result, WL-supported FG has the potential to be used as an alternative to egg proteins to develop sustainable low-cost spreadable emulsions. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Self-assembly embedding of curcumin by alkylated rice bran protein

Lysine-rich rice bran protein (RBP) can be used as raw material for alkylation modification to improve the self-assembly performance of protein. The results of 1H NMR, degree of alkylation, and DSC analysis showed that the alkyl chain was successfully attached to the RBP. The surface hydrophobicity and absolute ζ-potential increased. The three-dimensional structure of the alkylated RBP (ARBP) become more porous and ARBP-2 was selected as the material for embedding curcumin. The XRD results revealed that curcumin induced self-aggregation of ARBP-2 and the inclusion of curcumin was attained. The maximum encapsulation efficiency of curcumin was 82.67 % and the maximum loading amount was 171.37 g/100 g RBP. The results of atomic force microscopy (AFM), particle size, and polydispersity index (PDI) analyses revealed that the particles in the system were aggregated after curcumin was added. Curcumin was well protected by encapsulation in the self-assembled particles. Thus, this study provides a new strategy for the embedding and delivery of curcumin.

Phycocyanin/tannic acid complex nanoparticles as Pickering stabilizer with synergistic interfacial antioxidant properties

This study reported a type of phycocyanin (PC)-tannic acid (TA) complex nanoparticles (NPs) fabricated by simply mixing PC with TA at appropriate mass ratios. The assembly of PC-TA NPs was driven by secondary forces involving hydrophobic interactions and hydrogen bonding. PC-TA NPs promoted formations of Pickering emulsions with an oil volume fraction (φ) of 0.1-0.8. The interfacial antioxidant ability of PC-TA NPs was evaluated by comparing the contents of hydroperoxides, malonaldehyde, and hexanal due to lipid oxidation. The results showed that PC-TA NPs retarded lipid oxidation more efficiently than did PC, TA, tween 20, or tween 80, which suggested the synergistic antioxidant action of PC and TA. Besides, the PC-TA NPs stabilized high internal phase emulsion facilitated a higher retention of β-carotene under UV irradiation. Altogether, our findings demonstrate that the modification of PC by TA represents a strategy to fabricate PC-TA NPs with enhanced emulsification and antioxidant efficiency.

Soy protein isolate/carboxymethyl cellulose sodium complexes system stabilized high internal phase Pickering emulsions: Stabilization mechanism based on noncovalent interaction

The interactions between carboxymethyl cellulose sodium and proteins can regulate the interfacial and rheological properties of HIPEs, which plays a leading role in the stabilities of HIPEs. This article prepared various ratios of soluble soy protein isolate/carboxymethyl cellulose sodium (SPI/CMC) complexes in different proportions and examined the impact of various ratios of complexes on the structure and interface properties of complexes systems. Additionally, it explored the co-emulsification mechanism of HIPEs using SPI and CMC. At appropriate ratios of SPI/CMC, SPI and CMC mainly combine through non covalent binding and form complexes with smaller particle sizes and stronger electrostatic repulsion. The interfacial properties indicated that adding appropriate CMC increased the pliability and reduced the interfacial tension, while also enhancing the wettability of SPI/CMC complexes. At the ratio of 2:1, the SPI/CMC complexes-stabilized HIPPEs exhibited smaller oil droplets size, tighter droplet packing, and thicker interfacial film through the bridging of droplets and the generation of stronger gel-like network structures to prevent the coalescence/flocculation of droplets. These results suggested that the appropriate ratios of SPI/CMC can improve the physical stability of HIPEs by changing the structure and interface characteristics of the SPI/CMC complexes. This work provided theoretical support for stable HIPEs formed with protein-polysaccharide complexes.

Applications of Plant Bioactive Compounds as Replacers of Synthetic Additives in the Food Industry

According to the Codex Alimentarius, a food additive is any substance that is incorporated into a food solely for technological or organoleptic purposes during the production of that food. Food additives can be of synthetic or natural origin. Several scientific evidence (in vitro studies and epidemiological studies like the controversial Southampton study published in 2007) have pointed out that several synthetic additives may lead to health issues for consumers. In that sense, the actual consumer searches for "Clean Label" foods with ingredient lists clean of coded additives, which are rejected by the actual consumer, highlighting the need to distinguish synthetic and natural codded additives from the ingredient lists. However, this natural approach must focus on an integrated vision of the replacement of chemical substances from the food ingredients, food contact materials (packaging), and their application on the final product. Hence, natural plant alternatives are hereby presented, analyzing their potential success in replacing common synthetic emulsifiers, colorants, flavorings, inhibitors of quality-degrading enzymes, antimicrobials, and antioxidants. In addition, the need for a complete absence of chemical additive migration to the food is approached through the use of plant-origin bioactive compounds (e.g., plant essential oils) incorporated in active packaging.

High internal phase emulsion stabilized by sodium caseinate:quercetin complex as antioxidant emulsifier

High internal phase emulsion (HIPE) was produced and stabilized using a novel antioxidant emulsifier formed by the complexation between sodium caseinate (SC) and quercetin (Q). Colloidal complexes, produced via an alkaline process, showed great ability to reduce the interfacial tension between oil-water phases, promoting stabilization of the HIPEs even at low concentrations (1.5% w/v in the aqueous fraction). HIPEs at 0.80 volume fraction of dispersed phase presented remarkable viscosity due to the high-packing network of oil droplets surrounded by a thin liquid layer. Moreover, the emulsions showed a gel-like behavior and kinetic stability for 45-days at 25 °C. The approach of SC:Q complexes on HIPEs development is promising to reduce lipid oxidation, translated by the formation of hydroperoxides and malondialdehyde during storage, especially for the complex formed with the highest amount of the phenolic compound. In this study, the development of HIPEs with outstanding kinetic and oxidative stability is reported as a potential alternative for the development of healthier products with reduced saturated and trans-fat content.

Plant-Based Protein-Phenolic Interactions: Effect on different matrices and in vitro gastrointestinal digestion

This review summarizes the literature on the interaction between plant-based proteins and phenolics. The structure of the phenolic compound, the plant source of proteins, matrix properties (pH, temperature), and interaction mechanism (covalent and non-covalent) change the secondary structure, ζ-potential, surface hydrophobicity, and thermal stability of proteins as well as their functional properties including solubility, foaming, and emulsifying properties. Studies indicated that the foaming and emulsifying properties may be affected either positively or negatively according to the type and concentration of the phenolic compound. Protein digestibility, on the other hand, differs depending on (1) the phenolic concentration, (2) whether the food matrix is ​​solid or liquid, and (3) the state of the food-whether it is heat-treated or prepared as a mixture without heat treatment in the presence of phenolics. This review comprehensively covers the effects of protein-phenolic interactions on the structure and properties of proteins, including functional properties and digestibility both in model systems and real food matrix.

Why is it important to understand the nature and chemistry of tannins to exploit their potential as nutraceuticals?

Tannins comprise a large group of polyphenols that can differ widely in chemical composition and molecular weight. The use of tannins dates back to antiquity, but it is only in recent years that their potential use as nutraceuticals associated with the human diet is beginning to be exploited. Although the biological effects of these phytocomplexes have been studied for many years, there are still several open questions regarding their chemistry and biotransformation. The vastness of the molecules that make up the class of tannins has made their characterisation, as well as their nomenclature and classification, a daunting task. This review has been written with the aim of bringing order to the chemistry of tannins by including aspects that are sometimes still overlooked or should be updated with new research in order to understand the potential of these phytocomplexes as active ingredients or technological components for nutraceutical products. Future trends in tannin research should address many questions that are still open, such as determining the exact biosynthetic pathways of all classes of tannins, the actual biological effects determined by the interaction of tannins with other molecules, their metabolization, and the best extraction methods, but with a view to market requirements.

Combination modes impact on the stability of β-carotene-loaded emulsion constructed by soy protein isolate, β-glucan and myricetin ternary complex

A β-carotene rich emulsion with improved physical and chemical stability was obtained in this study, using different types of protein-polysaccharide-polyphenol ternary complexes as novel emulsifiers. The ternary complexes were prepared by covalent or non-covalent binding of soy protein isolate (SPI), β-glucan (DG) and myricetin (MC), which were evidenced to be stable. It was indicated that the emulsion stabilized by covalent complex of SPI, DG and MC, exhibited higher zeta-potential and smaller particle size than those stabilized by non-covalent complex. Furthermore, the covalent complexes prepared from different addition sequences showed different efficiencies in stabilizing the emulsion, in which SPI-DG-MC and SPI-MC-DG-stabilized emulsions possess better stability, emulsifying activity and storage resistance under adverse environmental treatment, with CI values of 62.7% and 64.3% after 25 days, respectively. According to oxidative stability and rheology analysis of the emulsions, it was found that the SPI-MC-DG complex prepared at the ratio of 4:2:1 was more stable with relatively less lipid oxidation products and a tighter stacking structure, and the final LH value was 39.98 mmol/L and the MDA value was 6.34 mmol/L. These findings implied that the ternary complex has the potential to deliver fat-soluble active ingredient by means of emulsion, but which depends on the mode and sequence of the molecular interactions.

Molecular mechanisms affecting the stability of high internal phase emulsions of zein-soy isoflavone complexes fabricated with ultrasound-assisted dynamic high-pressure microfluidization

In this study, zein-soy isoflavone complex (ZSI) emulsifiers were fabricated using ultrasound-assisted dynamic high-pressure micro fluidization to stabilise highinternal phase pickering emulsions. Ultrasound-assisted dynamic high-pressure micro-fluidization enhanced surface hydrophobicity, zeta potential, and soy isoflavone binding capacity, while it decreased particle size, especially during ultrasound and subsequent microfluidization. The treated ZSI could produce small droplet clusters and gel-like structures, with excellent viscoelasticity, thixotropy and creaming stability owing to their neutral contact angles. Ultrasound and subsequent micro fluidization treatment of the ZSI complexes were highly effective in preventing droplet flocculation and coalescence after long-term storage or centrifugation due to their higher surface load, thicker multi-layer interfacial structure, and stronger electronic repulsion between the oil droplets. This study provides insights and extends our current knowledge of how non-thermal technology affects the interfacial distribution of plant based particles and the physical stability of emulsions.

Potential Challenges of the Extraction of Carotenoids and Fatty Acids from Pequi (Caryocar brasiliense) Oil

Pequi is a natural source of bioactive compounds with wide versatility for fresh or processed fruit consumption, but it is still little explored economically. Functional foods are the subject of diverse scientific research since, in addition to being nourishing, they contain bioactive compounds capable of promoting several benefits to the human body. Pequi is a fruit species native to the Brazilian Cerrado, which is rich in oil and has components with a high nutritional value, such as unsaturated fatty acids (omega-3, omega-6, EPA, and DHA), antioxidants (carotenoids and phenolic compounds), and vitamins. Therefore, the present narrative review aims to compile and critically evaluate the methods used to extract oil from the pulp and almonds of pequi and describes the carotenoid separation from the oil because carotenoids are natural pigments of great interest in the pharmaceutical and food industries. It is emphasized that the main challenges linked to bioactive compound extraction are their susceptibility to degradation in the processing and storage stages of pequi and its derived products.

Targeting Interfacial Location of Phenolic Antioxidants in Emulsions: Strategies and Benefits

It is important to have larger proportions of health-beneficial polyunsaturated lipids in foods, but these nutrients are particularly sensitive to oxidation, and dedicated strategies must be developed to prevent this deleterious reaction. In food oil-in-water emulsions, the oil-water interface is a crucial area when it comes to the initiation of lipid oxidation. Unfortunately, most available natural antioxidants, such as phenolic antioxidants, do not spontaneously position at this specific locus. Achieving such a strategic positioning has therefore been an active research area, and various routes have been proposed: lipophilizing phenolic acids to confer them with an amphiphilic character; functionalizing biopolymer emulsifiers through covalent or noncovalent interactions with phenolics; or loading Pickering particles with natural phenolic compounds to yield interfacial antioxidant reservoirs. We herein review the principles and efficiency of these approaches to counteract lipid oxidation in emulsions as well as their advantages and limitations.

Protein Fractions from Flaxseed: The Effect of Subsequent Extractions on Composition and Antioxidant Capacity

Flaxseed proteins exhibit functionalities interesting for the food industry, including antioxidant capacity. Antioxidant activity depends on the protein composition and the presence of phenolic compounds extracted with them from the matrix. The research focused on the effect of subsequent protein extractions (water, salt and alkaline) of flaxseed meals (of three cultivars) on the protein fraction composition and its relations to antioxidant capacity. The protein and phenolic profiles and antioxidant functionalities (in antiradical ORAC and emulsion assays) were analysed. Spectroscopic characteristics of the fractions (fluorometric and FT-IR analysis) were also included. Our study has shown the effect of fractionation on the share of proteins at MW from 56–38 kDa (globulin-like) and <15 kDa (albumin-like) in the protein profiles. The highest globulin share was in the alkaline-extracted fractions (AEF) and albumin in the salt-extracted (SEF) ones. SDG (secoisolariciresinol diglucosides) and phenolic acids (p-coumaric and ferulic) were extracted with flaxseed proteins. Their contents were fraction-dependent and the highest in AEF. The concentration of phenolics in AEF corresponded with the highest antiradical capacity (ORAC) compared with the other fractions. However, the SEF showed a higher ability to inhibit oxidation in emulsions than AEF, which could be associated with the higher content of the low MW proteins.

A review of the structure, function, and application of plant-based protein-phenolic conjugates and complexes

Interactions between plant-based proteins (PP) and phenolic compounds (PC) occur naturally in many food products. Recently, special attention has been paid to the fabrication of PP-PC conjugates or complexes in model systems with a focus on their effects on their structure, functionality, and health benefits. Conjugates are held together by covalent bonds, whereas complexes are held together by noncovalent ones. This review highlights the nature of protein-phenolic interactions involving PP. The interactions of these PC with the PP in model systems are discussed, as well as their impact on the structural, functional, and health-promoting properties of PP. The PP in conjugates and complexes tend to be more unfolded than in their native state, which often improves their functional attributes. PP-PC conjugates and complexes often exhibit improved in vitro digestibility, antioxidant activity, and potential allergy-reducing activities. Consequently, they may be used as antioxidant emulsifiers, edible film additives, nanoparticles, and hydrogels in the food industry. However, studies focusing on the application of PP-PC conjugates and complexes in real foods are still scarce. Further research is therefore required to determine the structure-function relationships of PP-PC conjugates and complexes that may influence their application as functional ingredients in the food industry.

pH-shifting alters textural, thermal, and microstructural properties of mung bean starch-flaxseed protein composite gels

The objective of this study was to investigate the effect of pH-shifting on the textural and microstructural properties of mung bean starch (MBS)-flaxseed protein (FP) composite gels. Results showed that different pH-shifting treatments caused changes in hydrogen bond interactions and secondary structures in composite gels, leading to the formation of loose or compact gel networks. The pH 2-shifting modified protein and starch molecules with shorter chains tended to form smaller intermolecular aggregates, resulting in the formation of a looser gel network. For pH 12-shifting treatment, conformational change of FP caused the unfolding of protein and the exposure of more hydrophobic groups, which enhanced the hydrogen bond and hydrophobic interactions between polymers, contributing to the formation of a compact gel network. Furthermore, pH 12-shifting improved the water-holding capacity (WHC), storage modulus, and strength of gels, while pH 2-treated gels exhibited lower WHC, hardness, and gumminess due to the degradation of MBS and denaturation of FP caused by extreme acid condition. These findings suggest that pH-shifting can alter the gel properties of bi-polymeric starch-protein composite systems by affecting the secondary structures of proteins and the hydrogen bonding between the polymers, and provide a promising way for a wide application of FP in soft gel-type food production.

Different interactions between Tartary buckwheat protein and Tartary buckwheat phenols during extraction: Alterations in the conformation and antioxidant activity of protein

The purpose of this study is to investigate the interaction between buckwheat protein and buckwheat phenols in the process of protein extraction and to compare the effects of phenols on protein structure and antioxidant activity. With the extension of extraction time, the content of total phenol increased from 150.51 to 336.01 mg gallic acid equivalent/g sample. Four phenols and seven phenols were identified by UPLC-Q/TOF-MS as binding to proteins in non-covalent and covalent forms, respectively. The contribution of non-covalent and covalent bound phenols to the antioxidant activity of the complexes were different. Meanwhile, the binding of phenols changed the infrared characteristic peak of protein, and reduced the fluorescence intensity and surface hydrophobic value. The free amino and sulfhydryl content of the protein decreased with increasing extraction time. These findings provide valuable information for one-step preparation of protein-phenol complexes.

Impacts of hesperidin on whey protein functionality: Interacting mechanism, antioxidant capacity, and emulsion stabilizing effects

The objective of this work was to explore the possibility of improving the antioxidant capacity and application of whey protein (WP) through non-covalent interactions with hesperidin (HES), a citrus polyphenol with nutraceutical activity. The interaction mechanism was elucidated using several spectroscopic methods and molecular docking analysis. The antioxidant capacity of the WP-HES complexes was analyzed and compared to that of the proteins alone. Moreover, the resistance of oil-in-water emulsions formulated using the WP-HES complexes as antioxidant emulsifiers to changes in environmental conditions (pH, ion strength, and oxidant) was evaluated. Our results showed that HES was incorporated into a single hydrophobic cavity in the WP molecule, where it was mainly held by hydrophobic attractive forces. As a result, the microenvironments of the non-polar tyrosine and tryptophan residues in the protein molecules were altered after complexation. Moreover, the α-helix and β-sheet regions in the protein decreased after complexation, while the β-turn and random regions increased. The antioxidant capacity of the WP-HES complexes was greater than that of the proteins alone. Non-radiative energy transfer from WP to HES was detected during complex formation. Compared to WP alone, the WP-HES complexes produced emulsions with smaller mean droplet diameters, exhibited higher pH and salt stability, and had better oxidative stability. The magnitude of these effects increased as the HES concentration was increased. This research would supply valuable information on the nature of the interactions between WP and HES. Moreover, it may lead to the creation of dual-function antioxidant emulsifiers for application in emulsified food products.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Phenolic compounds in walnut pellicle improve walnut (Juglans regia L.) protein solubility under pH-shifting condition

This study focused on the interaction of walnut protein with phenolic extracts of walnut pellicle (PEWP) under alkaline condition, leading to enhancement of protein solubility under neutral condition. First, the change of PEWP under alkaline condition was determined by RP-HPLC and mass spectrometry, and the results showed that most ellagitannins in PEWP could be retained under alkaline condition within 3 h. Interaction between PEWP and walnut protein under pH-shifting condition resulted in the remarkable increase of protein solubility (above 90%) at neutral pH. The results from SDS-PAGE and SEC showed that the improved solubility lied in the formation of large and soluble protein aggregates due to the covalent interaction among walnut protein and polyphenols. A significant change in tertiary structure of protein-phenolic complex was witnessed by fluorescence spectrum and near-UV circular dichroism. Meanwhile, walnut protein-polyphenol interaction led to a slight increase in β-turn while a slight decrease in β-sheet. Combined with amino acid composition, it could be illustrated that the covalent bonding for walnut protein with polyphenol mainly occurred at Lysine residues.

Thoroughly review the recent progresses in improving O/W interfacial properties of proteins through various strategies

Along with the future food market developing world widely, the personalized nutrition and rational function food design are found to be urgently attracted. Oil in a water (O/W) emulsion system has an excellent ability to maintain nutraceuticals and thus plays a promising role in producing future functional foods. Understanding the interfacial related mechanisms involved are essential for improving the quality of food products. Protein can effectively reduce interfacial tension and stable immiscible phases. The interfacial properties of proteins directly affect the emulsion qualities, which have gradually become a prospective topic. This review will first briefly discuss the interfacial-related fundamental factors of proteins. Next, the paper thoroughly overviewed current physical and chemical strategies tailored to improving the interfacial and emulsion properties of proteins. To be summarized, a higher flexibility could allow protein to be more easily unfolded and adsorbed onto the interface but could also possibly form a softer interfacial film. Several physical strategies, such as thermal, ultrasound and especially high-pressure homogenization are well applied to improve the interfacial properties. The interfacial behavior is also altered by various green chemical strategies, such as pH adjustment, covalent modification, and low molecular weight (LMW) surfactant addition. These strategies upgraded emulsion properties by increasing adsorption load, accelerating diffusion and adsorption rate, associated with lowering interfacial tension, and promoting interfacial protein interactions. Future researches targeted at elucidating interfacial-bulk protein interactions, unraveling interfacial behavior through in silico tools, exploring connection between interfacial-industrial processing properties, and clarifying the interfacial-sensory-digestive relationships of O/W emulsions is needed to develop emulsion applications.

Structural modification induced by heat treatments improves the emulsifying attributes of lacquer seed protein isolate

The lacquer seed oil has received extensive attention in the food industry due to its health function, such as regulating blood lipids. But its by-product, lacquer seed meal, is often used as a low-value-added product such as animal feed. Lacquer seed meal contains about 20 % protein, which has amphiphilic properties, and there is limited attention to its emulsifying properties. In this study, the impact of heat treatment on the emulsifying properties of lacquer seed protein isolate (LSPI) was investigated. The EAI and ESI of the 120 °C heated LSPI increased by 77.1 % and 55.2 %, respectively. The emulsions prepared using heat-modified LSPI (120 °C) further showed lower hydroperoxide, TBARS and protein carbonyl contents (only 61.3 %, 61.0 % and 58.6 % of control) after storage. This result indicates that heat-treated LSPI retarded lipid and protein oxidation in LSPI-stabilized emulsions during storage. Changes in protein structure showed that increasing heating temperature resulted in the depolymerization of tertiary structure, higher surface hydrophobicity and lower contents of α-helix of LSPI. These changes in protein structure made the heated LSPIs have better emulsifying properties. Therefore, these findings developed a new use of LSPI and greatly enhanced the potential of LSPI as a natural emulsifier in the food industry.

Impact of Particle Sedimentation in Pendant Drop Tensiometry

Understanding the interface-stabilizing properties of surface-active components is key in designing stable macroscopic multiphase systems, such as emulsions and foams. When poorly soluble materials are used as an interface stabilizer, the insoluble material may sediment and interfere with the analysis of interfacial properties in pendant (or hanging) drop tensiometry. Here, the impact of sedimentation of particles on the interfacial properties determined by pendant drop tensiometry was evaluated using a model system of whey protein isolate and (non surface-active) glass beads (2.2-34.7 μm). Although the glass beads did not adsorb to the air-water interface, a 1% (w/w) glass bead solution appeared to decrease the surface tension by nearly 12 mN/m after 3 h. A similar effect was shown for a mixture of whey proteins and glass beads: the addition of 1% (w/w) of glass beads led to an apparent surface tension decrease of 31 mN/m rather than the 20 mN/m observed for pure whey proteins. These effects are attributed to the sedimentation of particles near the apex of the droplet, leading to droplet shape changes, which are interpreted as a decrease in surface tension using tensiometer software. The droplet density at the apex increases due to sedimentation, and this density increase is not accounted for when fitting the droplet shape with the Young-Laplace equation. The result is the observed apparent decrease in surface tension. In contrast to the significant impact of sedimenting material on the surface tension measurements, the impact on the results of oscillatory deformations was limited. These findings show that the impact of sedimentation should be considered when studying the interface-stabilizing properties of materials with reduced solubility, such as certain plant protein extracts. The presence of such particles should be carefully considered when conducting pendant drop tensiometry.

Oxidative stability of Pickering emulsions

•

Oxidative stability of O/W Pickering emulsions depends on their interfacial layer.

•

Solid particles can reduce Pickering emulsion oxidation by creating a thick interface.

•

Manipulating the charge of the interface can control Pickering emulsion oxidation.

•

Adding antioxidants to solid particles can reduce oxidation in Pickering emulsions.

In recent years, Pickering emulsions have been the focus of growing interest because of their possible role as alternatives to conventional emulsions. Some reviews have investigated the physical stability of Pickering emulsions, but the oxidative stability of these emulsions remains largely unexplored. In this review, the oxidation mechanism and factors affecting lipid oxidation rates in Pickering emulsions are discussed. Then, different food-grade solid particles are evaluated for their ability to stabilize Pickering emulsions. Finally, several strategies are reviewed for improving the oxidative stability of Pickering emulsions. These strategies are based on efforts to manipulate the physical and chemical properties of the interfacial layer, increase the concentration of antioxidants at the interfacial layer through incorporating them into solid particles, cause oil droplets to crowd at high packing fractions, trap oil droplets in a gel network and increase the viscosity of the continuous phase.

Plant-derived proteins as a sustainable source of bioactive peptides: recent research updates on emerging production methods, bioactivities, and potential application

The development of novel protein sources to compensate for the expected future shortage of traditional animal proteins due to their high carbon footprint is a major contemporary challenge in the agri-food industry currently. Therefore, both industry and consumers are placing a greater emphasis on plant proteins as a sustainable source of protein to meet the growing nutritional demand of ever increasing population. In addition to being key alternatives, many plant-based foods have biological properties that make them potentially functional or health-promoting foods, particularly physiologically active peptides and proteins accounting for most of these properties. This review discusses the importance of plant-based protein as a viable and sustainable alternative to animal proteins. The current advances in plant protein isolation and production and characterization of bioactive hydrolysates and peptides from plant proteins are described comprehensively. Furthermore, the recent research on bioactivities and bioavailability of plant protein-derived bioactive peptides is reviewed briefly. The limitations of using bioactive peptides, regulatory criteria, and the possible future applications of plant protein-derived bioactive peptides are highlighted. This review may help understand plant proteins and their bioactive peptides and provide valuable suggestions for future research and applications in the food industry.

Novel Gluten-Free Bread with an Extract from Flaxseed By-Product: The Relationship between Water Replacement Level and Nutritional Value, Antioxidant Properties, and Sensory Quality

The food industry generates a great amount of food waste and by-products, which in many cases are not fully valorized. Press cakes, deriving from oilseeds extraction, represent interesting co-products due to their nutritional value, high biopolymers content, and the presence of bioactive phytochemicals. Gluten-free breads (GFBs) are products that have disadvantages such as unsatisfactory texture, low nutritional value, and short shelf life, so natural additives containing proteins and hydrocolloids are in demand to increase GFBs value. In this study, extract from flaxseed by-product (FOCE-Flaxseed Oil Cake Extract) was used to replace water (25-100%) in GFBs formulations and their nutritional value, antioxidant properties, and sensory features were investigated. The results showed that GFBs with FOCE had an elevated nutritional and nutraceutical profile (up to 60% more proteins, significantly increased K, Mg, and P levels). Moreover, the addition of FOCE improved the technological parameters (increased specific volume, number of cells and height/width ratio, reduced density, average size, and perimeter of cells), antioxidant potential, and overall sensory quality of GFBs. This study showed an encouraging way of using a by-product that, due to its high content of proteins, polysaccharides, minerals, and antioxidants, can add value to GFBs.

Interaction of lentil protein and onion skin phenolics: Effects on functional properties of proteins and in vitro gastrointestinal digestibility

The effect of protein-phenolic interactions on the functional properties of lentil protein and in vitro gastrointestinal digestibility in different systems (extract solution, protein-phenolic solution, and emulsion) was studied. The presence of phenolic compounds negatively affected the foaming and emulsion properties of lentil protein. During in vitro gastrointestinal digestion, total phenolic content (TPC) and antioxidant capacity of the samples were decreased with the presence of lentil protein at the initial phase, however, they were found to be the highest in emulsions at the intestinal phase. The amount of protocatechuic acid and phenolic acid derivative was increased at the intestinal phase, while that of other phenolic compounds was decreased. Quercetin was not detected at the intestinal phase in all systems, while its glycoside derivatives were determined, which were the highest in emulsions. Anthocyanins were also the highest in extract solution among all systems. Protein-phenolic interactions had a significant effect on functional properties of lentil proteins, and bioaccessibility or antioxidant capacity of phenolic compounds.

Multifunctionality of Rapeseed Meal Protein Isolates Prepared by Sequential Isoelectric Precipitation

Rapeseed meal is a by-product of the oil-producing industry with a currently underestimated application. Two protein isolates, PI_2.5–8.5 or PI_10.5–2.5, were obtained from industrial rapeseed meal after treatment with an aqueous ethanol solution. The alkaline-extracted proteins were sequentially precipitated by two different modes, from pH 10.5 to 2.5, and vice versa, from 2.5 to 8.5, with a step of 1 pH unit. The preparation approach influenced both the functional and antioxidant properties of the isolates. The PI_10.5–2.5 exhibited higher water and oil absorption capacities than PI_2.5–8.5, reaching 2.68 g H₂O/g sample and 2.36 g oil/g sample, respectively. The emulsion stability of the PI_2.5–8.5, evaluated after heating at 80 °C, was either 100% or close to 100% for all pH values studied (from 2 to 10), except for pH 6 where it reached 93.87%. For the PI_10.5–2.5, decreases in the emulsion stability were observed at pH 8 (85.71%) and pH 10 (53.15%). In the entire concentration range, the PI_10.5–2.5 exhibited a higher scavenging ability on 2,2-diphenyl-1-picryl hydrazyl (DPPH) and hydroxyl radicals than PI_2.5–8.5 as evaluated by DPPH and 2-deoxyribose assays, respectively. At the highest concentration studied, 1.0%, the neutralization of DPPH radicals by PI_10.5–2 reached half of that exhibited by synthetic antioxidant butylhydroxytoluene (82.65%). At the same concentration, the inhibition of hydroxyl radicals by PI_10.5–2 (71.25%) was close to that achieved by mannitol (75.62%), which was used as a positive control. Established antioxidant capacities add value to the protein isolates that can thus be used as both emulsifiers and antioxidants.

An updated review on food-derived bioactive peptides: Focus on the regulatory requirements, safety, and bioavailability

Food-derived bioactive peptides (BAPs) are recently utilized as functional food raw materials owing to their potential health benefits. Although there is a huge amount of scientific research about BAPs' identification, purification, characterization, and physiological functions, and subsequently, many BAPs have been marketed, there is a paucity of review on the regulatory requirements, bioavailability, and safety of BAPs. Thus, this review focuses on the toxic peptides that could arise from their primary proteins throughout protein extraction, protein pretreatment, and BAPs' formulation. Also, the influences of BAPs' length and administration dosage on safety are summarized. Lastly, the challenges and possibilities in BAPs' bioavailability and regulatory requirements in different countries were also presented. Results revealed that the human studies of BAPs are essential for approvals as healthy food and to prevent the consumers from misinformation and false promises. The BAPs that escape the gastrointestinal tract epithelium and move to the stomach are considered good peptides and get circulated into the blood using different pathways. In addition, the hydrophobicity, net charge, molecular size, length, amino acids composition/sequences, and structural characteristics of BAPs are critical for bioavailability, and appropriate food-grade carriers can enhance it. The abovementioned features are also vital to optimize the solubility, water holding capacity, emulsifying ability, and foaming property of BAPs in food products. In the case of safety, the possible allergenic and toxic peptides often exhibit physiological functions and could be produced during the hydrolysis of food proteins. It was also noted that the production of iso-peptides bonds and undesirable Maillard reaction might occur during protein extraction, sample pretreatments, and peptide synthesis.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases—Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.