Structure, rheology and functionality of whey protein emulsion gels: Effects of double cross-linking with transglutaminase and calcium ions

Enhancing Lactobacillus plantarum delivery: Impact of gluconolactone concentration on high-internal-phase emulsion gels and gastrointestinal viability

In this study, the impact of Gluconolactone (GDL) concentration on the formation of high-internal-phase emulsion gels (HIPEGs) and the gastrointestinal digestive viability of Lactobacillus plantarum encapsulated within these HIPEGs were demonstrated. Increasing GDL concentrations led to cross-linking of particles at the oil-water interface, thereby stabilizing smaller oil droplets. The addition of GDL to HIPEs results in a significant increase in the secondary structure of SPI, specifically in β-sheet and β-turn formations, accompanied by a reduction in α-helix percentage. This alteration enhanced the binding effect of protein on water, leading to changes in intermolecular force. Notably, HIPEGs containing 3.0% GDL demonstrated superior encapsulation efficiency and delivery efficiency, reaching 99.0% and 84.5%, respectively. After 14 d of continuous zebrafishs feeding, the intestinal viable cells count of Lactobacillus plantarum reached 1.18 × 107 CFU/mL. This finding supports the potential use of HIPEGs as a probiotic delivery carrier, effectively enhancing the intestinal colonization rate.

Carboxymethyl chitosan and dialdehyde cellulose nanocrystal based injectable self-healing emulsion gel

The study aims to demonstrate a general method for producing emulsion gels with self-healing properties. Specifically, the self-healing emulsion gels were fabricated by crosslinking carboxymethyl chitosan (CMC) stabilized emulsion with dialdehyde cellulose nanocrystal (DACNC). The reversible imine bonds between primary amino groups from CMC and aldehyde groups from DACNC endow the emulsion gel with self-healing properties. The compressive strength of the emulsion gels was greatly increased from 37.43 kPa 83.7 kPa by encapsulating emulsion droplets (φ = 0 %-40 %.) in the gel matrix. Moreover, the emulsion gels exhibited much better self-healing and injectability ability compared to hydrogel because the emulsion droplets interacted with the 3D gel matrix, which were observed by cryo-SEM and CLSM. The emulsion droplets distributed in the gel matrix improved the mobility and interfacial contact area of CMC and DACNC. Water contact measurement confirmed that the CMC/DACNC self-healing emulsion gels showed a hydrophilic surface. The CMC/DACNC emulsion gels could maintain a good structural stability as the oil loss was <1 % after centrifugation. This research provides a method to keep the structural stability of emulsion gels by inducing self-healing ability and modified cellulose nanocrystals, which could extend the shelf life and application area of emulsion gels.

Structural, physicochemical and digestive properties of non-covalent and covalent complexes of ultrasound treated soybean protein isolate with soybean isoflavone

The non-covalent and covalent complexes of ultrasound treated soybean protein isolate (SPI) and soybean isoflavone (SI) were prepared, and the structure, physicochemical properties and in vitro digestion characteristics of SPI-SI complexes were investigated. Ultrasonic treatment increased the non-covalent and covalent binding degree of SPI with SI, and the 240 W ultrasonic covalent complexes had higher binding efficiency. Appropriate ultrasonic treatment caused more uniform particle size distribution, lower average particle size and higher surface charge, which enhanced the free sulfhydryl groups and surface hydrophobicity, thus improving the stability, solubility and emulsifying properties of complexes. Ultrasonic treatment resulted in more disordered secondary structure, tighter tertiary conformation, higher thermal stability and stronger SPI-SI covalent interactions of complexes. These structural modifications of particles had important effects on the chemical stability and gastrointestinal digestion fate of SI. The ultrasonic covalent complexation had a greater resistance to heat-induced chemical degradation of SI and improved its chemical stability. Furthermore, the 240 W ultrasonic covalent complexes showed lower protein digestibility during digestion, and provided stronger protection for SI, which improved the digestion stability and antioxidant activity. Therefore, appropriate ultrasound promoted SPI-SI interactions to improve the stability and functional properties of complexes, which provided a theoretical basis for the development of new complexes and their applications in functional foods.

Preparation of bovine serum albumin-arabinoxylan cold-set gels by glucono-δ-lactone and salt ions double induction

In order to investigate the effect of glucono-δ-lactone (GDL) and different salt ions (Na+ and Ca2+) induction on the cold-set gels of bovine serum albumin (BSA)-arabinoxylan (AX), the gel properties and structure of BSA-AX cold-set gels were evaluated by analyzing the gel strength, water-holding capacity, thermal properties, and Fourier Transform Infrared (FTIR) spectra. It was shown that the best gel strength (109.15 g) was obtained when the ratio of BSA to AX was 15:1. The addition of 1 % GDL significantly improved the water-holding capacity, gel strength and thermal stability of the cold-set gels (p < 0.05), and the microstructure was smoother. Low concentrations of Na+ (3 mM) and Ca2+ (6 mM) significantly enhanced the hydrophobic interaction and hydrogen bonding between BSA and AX after acid induction, and the Na+-induced formation of a denser microstructure with a higher water-holding capacity (75.51 %). However, the excess salt ions disrupted the stable network structure of the cold-set gels and reduced their thermal stability and crystalline structure. The results of this study contribute to the understanding of the interactions between BSA and AX induced by GDL and salt ions, and provide a basis for designing hydrogels with different properties.

Moderation-excess interactions of epigallocatechin gallate and CaCl2 modulate the gelation performance of egg white transparent gels

In this study, the moderation-excess interaction of epigallocatechin gallate (EGCG) and calcium ions (Ca2+) to the gelation performance of transparent egg white protein (EWP) gel (EWG) was explored. The oxidation of EGCG introduced a yellowish-brown EWG, whereas the weakening of Ca2+ ionic bonds caused a notable reduction in the hardness of EWG, from 120.67 g to 73.57 g. Achieving the optimal EGCG-to-Ca2+ ratio in EWG conferred enhanced water-holding capacity to 86.98%, while an excess of EGCG attributed to the creation of a three-dimensional structure within the void "walls". The elevated presence of EGCG influenced the ionic bonds and hydrophobic interactions, thereby presenting a moderate-excess relationship with sulfhydryl and disulfide bonds, β-sheet, and α-helical structures. Notably, EGCG reduced the digestibility of EWG to 50.06%, while concurrently fostering the creation of smaller particle sizes. This study provides a scientific basis for the controllable preparation and quality regulation of transparent EWG.

Construction of emulsion gel based on the interaction of anionic polysaccharide and soy protein isolate: Focusing on structural, emulsification and functional properties

In this study, the effects on the structures and emulsion gels of carrageenan (CA) and gum arabic (GA) with soybean protein isolate (SPI) were investigated. The results showed that CA and GA exposed hydrophobic groups to SPI, and formed complexes through non-covalent interactions to improve the stability of the complexes. Furthermore, the emulsion gels based on the emulsions exhibited that CA formed emulsion-filled gels with higher elasticity, stronger gel strength, and thermal reversibility, whereas GA formed emulsion-aggregated gels with higher viscosity, and a weak-gel network. The results of digestion showed that, CA was more helpful to slow down the release of free fatty acids and protect vitamin E during digestion. Compared with SPI-GA emulsion gel, SPI-CA emulsion gel had better physicochemical properties and stronger network structure. The results of this study may be useful in the development of anionic polysaccharides that interact with SPI, and they may provide new insights on the preparation of emulsion gels that slowly release fat-soluble nutrients.

Preparation of Transglutaminase-Catalyzed Rice Bran Protein Emulsion Gels as a Curcumin Vehicle

Protein-based emulsion gels have tunable viscoelasticity that can be applied to improve the stability of bioactive ingredients. As the by-product of rice processing, rice bran protein (RBP) has high nutritional value and good digestibility, exhibiting unique value in the development of hypoallergenic formula. In this study, the effect of transglutaminase (TGase) cross-linking on the physicochemical properties of RBP emulsion gels was investigated. To improve the stability of curcumin against environmental stress, the entrapment efficiency and stability of curcumin in the emulsion gel systems were also evaluated. The results indicated that TGase increased the viscoelastic modulus of RBP emulsion gels, resulting in a solid-like structure. Moreover, the entrapment efficiency of curcumin was increased to 93.73% after adding TGase. The thermal stability and photo-stability of curcumin were enhanced to 79.54% and 85.87%, respectively, compared with the sample without TGase addition. The FTIR results showed that TGase induced the cross-linking of protein molecules and the secondary structure change in RBP. Additionally, SEM observation confirmed that the incorporation of TGase promoted the formation of a compact network structure. This study demonstrated the potential of RBP emulsion gels in protecting curcumin and might provide an alternative strategy to stabilize functional ingredients.

Enhanced probiotic viability in innovative double-network emulsion gels: Synergistic effects of the whey protein concentrate-xanthan gum complex and κ-carrageenan

In this study, the whey protein concentrate and xanthan gum complex obtained by specific pH treatment, along with κ-carrageenan (KC), were used to encapsulate Lactobacillus acidophilus JYLA-191 in an emulsion gel system. The effects of crosslinking and KC concentration on the visual characteristics, stability, mechanical properties, and formation mechanism of emulsion gels were investigated. The results of optical imaging, particle size distribution, and rheology exhibited that with the addition of crosslinking agents, denser and more homogeneous emulsion gels were formed, along with a relative decrease in the droplet size and a gradual increase in viscosity. Especially when the concentration of citric acid (CA) was 0.09 wt%, KC was 0.8 wt%, and K+ was present in the system, the double-network emulsion gel was stable at high temperatures and in freezing environments, and the swelling ratio was the lowest (9.41%). Gastrointestinal tract digestive treatments and pasteurization revealed that the probiotics encapsulated in the double-network emulsion gel had a higher survival rate, which was attributed to the synergistic cross-linking of CA and K+ biopolymers to construct the emulsion gels. Overall, this study highlights the potential of emulsion gels to maintain probiotic vitality and provides valuable insights for developing inventive functional foods.

Modulating peppermint oil flavor release properties of emulsion-filled protein gels: Impact of cross-linking method and matrix composition

For some food applications, it is desirable to control the flavor release profiles of volatile flavor compounds. In this study, the effects of crosslinking method and protein composition on the flavor release properties of emulsion-filled protein hydrogels were explored, using peppermint essential oil as a model volatile compound. Emulsion-filled protein gels with different properties were prepared using different crosslinking methods and gelatin concentrations. Flavor release from the emulsion gels was then monitored using an electronic nose, gas chromatography-mass spectrometry (GC-MS), and sensory evaluation. Enzyme-crosslinked gels had greater hardness and storage modulus than heat-crosslinked ones. The hardness and storage modulus of the gels increased with increasing gelatin concentration. For similar gel compositions, flavor release and sensory perception were faster from the heat-crosslinked gels than the enzyme-crosslinked ones. For the same crosslinking method, flavor release and perception decreased with increasing gelatin concentration, which was attributed to retardation of flavor diffusion through the hydrogel matrix. Overall, this study shows that the release of hydrophobic aromatic substances can be modulated by controlling the composition and crosslinking of protein hydrogels, which may be useful for certain food applications.

Tailoring 3D-printed high internal phase emulsion-rice starch gels: Role of amylose in rheology and bioactive stability

This study investigated the properties of 3D-printed high internal phase emulsion (HIPE)-rice starch gels, specially tailored for personalized nutrition by co-encapsulating resveratrol and β-carotene. We examined the influence of amylose content on various parameters, including functional groups, linear and nonlinear rheology, printed precision and microstructural stability. Additionally, we assessed the protective efficacy and release in vitro digestion of these gels on the encapsulated bioactive components. Compared to HIPE, HIPE-starch gels differently impacted by amylose content in starches. Low-level amylose weakened the network structure, attributed to amylose mainly responsible for gel formation and weak hydrogen bond interaction between the surface-active molecules and amylose due to gelatinized starch granules rupturing the protein network. Oppositely, high-level amylose led to denser, more gel-like structures with enhanced mechanical strength and reversible deformation resistance, making them suitable for 3D printing. Furthermore, 3D-printed gels with high-level amylose demonstrated well-defined structures, smooth surfaces, stable printing and less dimension deviation. They were also regarded as effective entrapping and delivery systems for resveratrol and β-carotene, protecting them against degradation from environment and damage under the erosion of digestive fluid. Overall, this research offers a straightforward strategy for creating reduced-fat HIPE gels that serve as the carrier for personalized nutraceutical foods.

Construction and Properties of Oil-Loaded Soybean Protein Isolate/Polysaccharide-Based Meat Analog Fibers

Rationally designing the fibrous structure of artificial meat is a challenge in enriching the organoleptic quality of meat analogs. High-quality meat analog fibers have been obtained by wet-spinning technique in our previous study, whereas introducing oil droplets will further achieve their fine design from the insight of microstructure. Herein, in this current work, oil was introduced to the soybean protein isolate/polysaccharide-based meat analog fibers by regulating the oil droplets' size and content, which, importantly, controlled the spinning solution characterization as well as structure-related properties of the meat analog fiber. Results showed that the oil dispersed in the matrix as small droplets with regular shapes, which grew in size as the oil content increased. Considering the effect of oil droplets' size and content on the spinnability of the spinning solution, the mechanical stirring treatment was chosen as the suitable treatment method. Importantly, increasing the oil content has the potential to enhance the juiciness of meat analog fibers through improvements in water-holding capacity and alterations in water mobility. Overall, the successful preparation of oil-loaded plant-based fiber not only mimicked animal muscle fiber more realistically but also provided a general platform for adding fat-soluble nutrients and flavor substances.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Effect of transglutaminase on ovalbumin emulsion gels as carriers of encapsulated probiotic bacteria

BACKGROUND

The use of emulsion gels to protect and deliver probiotics has become an important topic in the food industry. This study used transglutaminase (TGase) to regulate ovalbumin (OVA) to prepare a novel emulsion gel. The effects of OVA concentration and the addition of TGase on the microstructure, rheological properties, water-holding capacity, and stability of the emulsion gels were investigated.

RESULTS

With the addition of TGase and the increasing OVA, the particle size of the emulsion gels decreased significantly (P < 0.05). The gels with TGase exhibited greater water holding, hardness, and chewiness to some extent by forming a more uniform and stable system. After simulated digestion, the survival rate of Bifidobacterium lactis embedded in OVA emulsion gels improved significantly in comparison with the oil-water mixture as a result of the protective effect of the emulsion gel encapsulation.

CONCLUSION

By increasing the OVA content and adding TGase, the rheological characteristics, stability, and encapsulation capability of the OVA emulsion gel could be enhanced, providing a theoretical basis for the use of emulsion gels to construct probiotic delivery systems. © 2023 Society of Chemical Industry.

Effect of black wolfberry anthocyanin and maltitol on the gelation and microstructural properties of curdlan/gellan gum hybrid gels

BACKGROUND

Laboratory scale experiments have shown that curdlan and gellan gum gelled together as curdlan/gellan gum (CG) hybrid gels showed better gel properties than the individual curdlan and gellan gum. In this study, CG and black wolfberry anthocyanin (BWA), CG and maltitol (ML) hybrid gels were constructed using CG hybrid gel as matrix. The effects of BWA or ML on the gel properties and microstructure of CG hybrid gels were investigated and a confectionery gel was developed.

RESULTS

The presence of BWA increased the storage modulus (G') value of CG at 0.1 Hz, whereas ML had little effect on the G' value of CG. The addition of BWA (5 g L-1 ) and ML (0.3 mol L-1 ) increased the melting and gelling temperatures of CG hybrid gels to 42.4 °C and 34.1 °C and 44.2 °C and 33.2 °C, respectively. Meanwhile, the relaxation time T22 in CG-ML and CG-BWA hybrid gels was reduced to 91.96 and 410.27 ms, indicating the strong binding between BWA and CG, ML and CG. The hydrogen bond interaction between BWA or ML and CG was confirmed by the shift in the hydroxyl stretching vibration peak. Moreover, the microstructures of CG-ML and CG-BWA hybrid gels were denser than that of CG. In addition, confectionery gel containing CG-BWA-ML has good chewing properties.

CONCLUSION

These results indicated that the incorporation of BWA or ML could improve the structure of CG hybrid gels and assign a sustainability potential for the development of confectionery gels based on CG complex. © 2024 Society of Chemical Industry.

Construction of a soybean protein isolate/polysaccharide-based whole muscle meat analog: Physical properties and freeze-thawing stability study

A growing interest has arisen in recreating real meat by mimicking its texture characteristics and muscle fiber structure. Our previous work successfully created meat analog fiber based on soybean protein isolate (SPI) and sodium alginate (SA) with the wet-spinning method. In this work, we analyzed the microstructure, texture profile, and water retainability of the assembled plant-based whole muscle meat analog (PMA) made of SPI/SA-based meat analog fiber and systematically studied the effect of different combinations and contents of transglutaminase (TG), salt, and soybean oil on the rheological behavior of the formulated adhesive. The estimated optimal condition that has the most similar texture characteristic with real chicken breast meat is: for every 1:1 mass ratio of simulated plant meat fibers to the adhesive, add 0.1 % TG enzyme addition in the adhesive and 100 mM NaCl addition. The physical behavior of PMA during cryopreservation was investigated through freeze-thaw cycles and freezing times. The addition of a small amount of oil and salt can efficiently prevent the PMA through freezing conditions which is comparable with the addition of D-Trehalose (TD). Overall, this study not only created a plant-based whole muscle meat analog product that is similar in texture to real chicken breast meat but also provided a new direction for constructing fiber-rich structure protein-based muscle meat analogs and their further commercialization.

Conjugation of Soybean Proteins 7S/11S Isolate with Glucose/Fructose in Gels through Wet-Heating Maillard Reaction

Conjugation with glucose (G) and fructose (F) via the Maillard reaction under the wet-heating condition is a natural and non-toxic method of improving the technological functions of 7S/11S proteins in different kinds of gels. It may be used as an affordable supply of emulsifiers and an excellent encapsulating matrix for gels. This study aimed to create a glucose/fructose-conjugated 7S/11S soy protein via the Maillard reaction. The conjugation was confirmed by determining the SDS-PAGE profile and circular dichroism spectra. In addition, these conjugates were comprehensively characterized in terms of grafting degree, browning degree, sulfhydryl content, surface hydrophobicity (H0), and differential scanning calorimetry (DSC) through various reaction times (0, 24, 48, and 72 h) to evaluate their ability to be used in food gels. The functional characteristics of the 7S/11S isolate-G/F conjugate formed at 70 °C, with a high degree of glycosylation and browning, were superior to those obtained at other reaction times. The SDS-PAGE profile indicated that the conjugation between the 7S and 11S proteins and carbohydrate sources of G and F through the Maillard reaction occurred. Secondary structural results revealed that covalent interactions with G and F affected the secondary structural components of 7S/11S proteins, leading to increased random coils. When exposed to moist heating conditions, G and F have significant potential for protein alteration through the Maillard reaction. The results of this study may provide new insights into protein modification and establish the theoretical basis for the therapeutic application of both G and F conjugation with soy proteins in different food matrixes and gels.

Encapsulation of lactic acid bacteria in W1/O/W2 emulsions stabilized by mucilage:pectin complexes

Opuntia silvestri mucilage obtained from dried stems was explored as an emulsifier to prepare double emulsions aiming to encapsulate Lactiplantibacillus plantarum CIDCA 83114. W1/O/W2 emulsions were prepared using a two-step emulsification method. The aqueous phase (W1) consisted of L. plantarum CIDCA 83114, and the oil phase (O) of sunflower oil. The second emulsion was prepared by mixing the internal W1/O emulsion with the W2 phase, consisting of 4 % polysaccharides, formulated with different mucilage:(citric)pectin ratios. Their stability was assessed after preparation (day 0) and during storage at 4 °C (28 days). Determinations included creaming index, color, particle size, viscosity, turbidity, and bacterial viability, along with exposure to simulated gastrointestinal conditions. Significant differences were evaluated by analysis of variance (ANOVA) and Duncan's test (P < 0.05). After 28 days storage, bacterial viability in the W1/O/W2 emulsions was above 6 log CFU/mL for all the pectin:mucilage ratios. Emulsions containing mucilage and pectins showed lower creaming indices after 15 days, remaining stable until the end of the storage period. Formulations including 1:1 pectin:mucilage ratio exhibited the highest bacterial viability under simulated gastrointestinal conditions and were more homogeneous in terms of droplet size distributions at day 0, hinting at a synergistic effect between mucilage components (e.g., proteins, Ca2+) and pectin in stabilizing the emulsions. These results showed that Opuntia silvestri mucilage enhanced the stability of emulsions during refrigerated storage, highlighting its potential for encapsulating lactic acid bacteria. This presents an economical and natural alternative to traditional encapsulating materials.

Effect of Molecules' Physicochemical Properties on Whey Protein/Alginate Hydrogel Rheology, Microstructure and Release Profile

The encapsulation of molecules with different physicochemical properties (theophylline, blue dextran, salicylic acid and insulin) in whey protein (WP) and alginate (ALG) microparticles (MP) for oral administration was studied. MP based on WP/ALG were prepared by a cold gelation technique and coated with WP solution after reticulation. Molecules influenced polymer solution viscosity and elasticity, resulting in differences regarding encapsulation efficiency (from 23 to 100%), MP structure and swelling (>10%) and in terms of pH tested. Molecule release was due to diffusion and/or erosion of MP and was very dependent on the substance encapsulated. All the loaded MP were successfully coated, but variation in coating thickness (from 68 to 146 µm) and function of the molecules encapsulated resulted in differences in molecule release (5 to 80% in 1 h). Gel rheology modification, due to interactions between WP, ALG, calcium and other substances, was responsible for the highlighted differences. Measuring rheologic parameters before extrusion and reticulation appeared to be one of the most important aspects to study in order to successfully develop a vector with optimal biopharmaceutical properties. Our vector seems to be more appropriate for anionic high-molecular-weight substances, leading to high viscosity and elasticity and to MP enabling gastroresistance and controlled release of molecules at intestinal pH.

Impact of κ-Carrageenan on the Cold-Set Pea Protein Isolate Emulsion-Filled Gels: Mechanical Property, Microstructure, and In Vitro Digestive Behavior

More understanding of the relationship among the microstructure, mechanical property, and digestive behavior is essential for the application of emulsion gels in the food industry. In this study, heat-denatured pea protein isolate particles and κ-carrageenan were used to fabricate cold-set emulsion gels induced by CaCl2, and the effect of κ-carrageenan concentration on the gel formation mechanism, microstructure, texture, and digestive properties was investigated. Microstructure analysis obtained by confocal microscopy and scanning electron microscopy revealed that pea protein/κ-carrageenan coupled gel networks formed at the polysaccharide concentration ranged from 0.25% to 0.75%, while the higher κ-carrageenan concentration resulted in the formation of continuous and homogenous κ-carrageenan gel networks comprised of protein enriched microdomains. The hydrophobic interactions and hydrogen bonds played an important role in maintaining the gel structure. The water holding capacity and gel hardness of pea protein emulsion gels increased by 37% and 75 fold, respectively, through increasing κ-carrageenan concentration up to 1.5%. Moreover, in vitro digestion experiments based on the INFOGEST guidelines suggested that the presence of 0.25% κ-carrageenan could promote the digestion of lipids, but the increased κ-carrageenan concentration could delay the lipid and protein hydrolysis under gastrointestinal conditions. These results may provide theoretical guidance for the development of innovative pea protein isolate-based emulsion gel formulations with diverse textures and digestive properties.

Chitin nanocrystals as natural gel modifier for yielding stronger acid-induced soy protein isolate gel

This study aimed to enhance the rheological properties and thermal stability of acid-induced soy protein isolate (SPI) gels by incorporating chitin nanocrystals (ChNCs) and proposing a gelation mechanism. SPI gels exhibited pseudo-plastic behavior. Increasing ChNCs concentration from 0.00 % to 1.00 % improved G' values, recovery rate, and initial degradation temperature: from 75.6 Pa to 1024.3 Pa, 80.27 % to 85.47 %, and 261.5 °C to 275.8 °C, respectively. FTIR analysis confirmed electrostatic and hydrogen bonding interactions between SPI and ChNCs. Adding 1.00 % ChNCs reduced α-helix content from 19.7 % to 12.1 % while increasing β-sheet content from 46.5 % to 52.6 %. This led to protein unfolding, exposure of Trp residues, and orderly aggregation, forming a dense cross-linked gel network. Gel particle size increased from 185.5 nm (no ChNCs) to 504.4 nm (1.00 % ChNCs), with reduced surface charges. Hydrophobic and electrostatic interactions were key forces stabilizing SPI-ChNCs gels. These findings offer a practical approach to enhancing traditional acid-induced protein gel-based functional foods using naturally sourced chitin nanocrystals.

Survivability of probiotics in Pickering emulsion gels stabilized by salmon by-product protein / sodium alginate soluble complexes at neutral pH

Adequate amounts of live probiotics reaching the gut are necessary to maintain host health. However, the harsh environment during processing, the low pH of human gastric acid, and the high concentration of bile salts in the gut can significantly reduce survivability of probiotics. In this work, we propose a simple Pickering emulsion gels strategy to encapsulate Lactobacillus plantarum Lp90 into oil droplets filled in calcium alginate gels to improve its viability under pasteurization and gastrointestinal conditions. The emulsion gels were stabilized by the soluble complexes of salmon by-product protein (SP) and sodium alginate (ALG), and the aqueous phase was solidified by the addition of calcium. The interaction between SP and ALG and the effect of ALG concentration on emulsifying ability and emulsion stability were studied. The results from optical imaging, nuclear magnetic resonance, and rheological properties showed that the stability and viscosity of the emulsions gradually increased with the increased ALG concentration, while the droplet size of the emulsions and the content of free water in the system decreased significantly. Especially when the concentration of ALG was 1 %, the emulsion system was stable under the environment of high temperature and high ionic strength, and the water holding capacity was the highest. Through pasteurization and gastrointestinal digestion experiments, it was found that the survival rate of probiotics encapsulated in emulsion gels was significantly higher than that encapsulated in emulsions or hydrogels, which benefited from the dual action of oil droplets and calcium alginate gels network. These results provide a new strategy for the processing of probiotics and the high-value utilization of marine fish by-products.

Modulating in vitro digestion of whey protein cold-set emulsion gels via gel properties modification with gallic acid and EGCG

Gallic acid (GA) and epigallocatechin gallate (EGCG), cooperated at varied ratios (1:0, 3:1, 1:1, 1:3, and 0:1), were employed to modify gel properties of calcium induced-whey protein emulsion gel. The effects of GA/EGCG on emulsion morphology, as well as gel properties and in vitro digestive behavior of the emulsion gels were investigated. Compared with emulsions without phenolics, GA/EGCG induced slightly smaller particle size and stronger electrostatic repulsion between emulsion droplets. Moreover, GA/EGCG, notably at a ratio of 3:1, promoted electrostatic and hydrophobic interactions between protein molecules and the formation of a compact and filamentous gel microstructure, resulting in a remarkable increment in the gel strength (up to 106 %). Furthermore, in vitro oral digestion, dynamic gastric digestion (using an artificial gastric digestive system, AGDS), and intestinal digestion of the emulsion gels were simulated. Particle size and protein hydrolysis results revealed that GA/EGCG was prone to weaken the physical disintegration of gels, reduce protein hydrolysis, and enhance the stability of emulsified oil droplets during dynamic gastric digestion. As a consequence, delayed release of oil droplets was observed in the gels and more free fatty acids were released in the intestinal digestion, particularly in the gel with GA/EGCG (3:1). These findings would provide novel strategies for application of phenolic compounds in developing protein gel-based delivery systems.

Alginate biopolymeric structures: Versatile carriers for bioactive compounds in functional foods and nutraceutical formulations: A review

Alginate-based biopolymer products have gained attention for protecting and delivering bioactive components in nutraceuticals and functional foods. These naturally abundant anionic, unbranched, and linear copolymers are also produced commercially by microorganisms. Alone or in combination with other copolymers, they efficiently transport bioactive molecules in food and nutraceutical products. This review aims to provide an in-depth understanding of alginate-based products and structures, emphasizing their role in delivering functional molecules in various formulations and delivery systems. These include edible coatings/films, gels/emulsions, beads/droplets, microspheres/particles, and engineered nanostructures where alginates have been used potentially. By exploring these applications, readers gain insights into the benefits of these products. Because, alginate-based biopolymer products have shown promise in delivering bioactive compounds like vitamin C, vitamin D3, curcumin, β-carotene, resveratrol, folic acid, gliadins, caffeic acid, betanin, limonoids, quercetin, several polyphenols and essential oils, etc., which are chief contributors to treating specific/overall nutritional and chronic metabolic disorders. So, this review summarizes the potential of alginate-based structures/products in various forms for delivering a wide range of functional food ingredients and nutraceutical components that offer promising perspectives for future investigations.

Preparation of enzymatically cross-linked α-lactalbumin nanoparticles and their application for encapsulating lycopene

High internal phase Pickering emulsions (HIPPEs) stabilized by protein nanoparticles have been widely reported, but the use of enzymatic methods for preparing these nanoparticles remains underexplored. Our hypothesis is that enzymatically crosslinked α-lactalbumin (ALA) nanoparticles (ALATGs) prepared using transglutaminase will demonstrate improved properties as stabilizers for HIPPEs. In this study, we investigated the physicochemical properties and microstructures of ALATGs, finding that enzymatic crosslinking could be enhanced by removing Ca2+ ions from ALA and preheating the proteins (85 °C, 15 min). The electrical charge, secondary structure, and surface hydrophobicity of ALATGs were found to depend on crosslinking conditions. HIPPEs formed with an ALA concentration of 10 mg/mL and an enzyme activity of 120 U/g exhibited the highest apparent viscosity and mechanical strength, as well as significantly improved loading capacity and photostability for the encapsulated lycopene. Overall, our results support the hypothesis that ALATG-nanoparticles show superior performance as emulsifiers compared to ALA-nanoparticles.

Quality characteristics of peanut protein-based patties produced with pre-emulsified olive oil as a fat replacer: Influence of acylglycerol type

The emulsion (O/W) may be used as a fat replacer to develop healthier meat analogs. The purpose of this work was to evaluate the effects of oil incorporation methods (direct oil addition and emulsion addition) and oil types [triacylglycerol (TAG) and diacylglycerol (DAG)] on the quality characteristics of peanut protein-based patties crosslinked by transglutaminase (TGase). The patties formulated with emulsions showed larger texture parameters (springiness, cohesiveness and gumminess), lower cooking loss and higher acceptability compared with directly adding oil. The rheological results confirmed that the presence of emulsions strengthened the gel structure in patties, which allowed the patties containing emulsions to stabilize free water. Whereas, TAG-based emulsion was more effective than DAG-based emulsion in improving quality of products, possibly because the competitive adsorption at oil-water interface of DAG reduced the crosslinking between the interfacial protein and adjacent protein molecules. This study revealed the relationship between the acylglycerol type in emulsion and the patty quality, providing a reference for the development of plant-based patties.

Construction of astaxanthin loaded Pickering emulsions gel stabilized by xanthan gum/lysozyme nanoparticles with konjac glucomannan from structure, protection and gastrointestinal digestion perspective

Pickering emulsion gels have demonstrated their efficacy in delivering bioactive compounds by effectively preventing droplet aggregation, Ostwald maturation, and phase separation through gel network. Astaxanthin (AST) Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) and konjac glucomannan (KGM) were studied from rheological tests and textural analysis. The Pickering emulsion gel demonstrated the highest water holding capacity (WHC) at concentration of 2 % XG/Ly NPs, 60 % oil phase fraction, and 0.5 % KGM concentration. The presence of KGM was observed to enhance the plasticity of Pickering emulsion gels, as evidenced by the dense gel network structure formed on the surface of the droplets. Furthermore, the utilization of Pickering emulsion gels containing AST has demonstrated enhanced photostability and a protective effect on AST, as evidenced by antioxidant experiments. Moreover, the incorporation of KGM in Pickering emulsion gels has been found to reduce the release of free fatty acids (FFA) and the bioaccessibility of AST, as indicated in vitro digestion results. Overall, these findings indicate the potential of KGM-based Pickering emulsion gels as effective vehicles for the delivery of hydrophobic bioactive compounds within the food industry.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Synergistic effect and mechanism of cellulose nanocrystals and calcium ion on the film-forming properties of pea protein isolate

The current serious environmental problems have greatly encouraged the design and development of food packaging materials with environmental protection, green, and safety. This study aims to explore the synergistic effect and corresponding mechanism of cellulose nanocrystals (CNC) and CaCl2 to enhance the film-forming properties of pea protein isolate (PPI). The combination of 0.5 % CNC and 4.5 mM CaCl2 resulted in a 76.6 % increase in tensile strength when compared with pure PPI-based film. Meanwhile, this combination effectively improved the barrier performance, surface hydrophobicity, water resistance, and biodegradability of PPI-based film. The greater crystallinity, viscoelasticity, lower water mobility, and improved protein spatial conformation were also observed in CNC/CaCl2 composite film. Compared with the control, the main degradation temperature of composite film was increased from 326.23 °C to 335.43 °C. The CNC chains bonded with amino acid residue of pea protein at specific sites via non-covalent forces (e.g., hydrogen bonds, Van der Waals forces). Meanwhile, Ca2+ promoted the ordered protein aggregation at suitable rate and degree, accompanied by the formation of more disulfide bonds. Furthermore, proper Ca2+ could strengthen the cross-linking and interaction between CNC and protein, thereby establishing a stable network structure. The prepared composite films are expected to be used for strawberry preservation.

Characterization of structural and functional properties of soy protein isolate and sodium alginate interpenetrating polymer network hydrogels

BACKGROUND

This study used enzymatic and Ca2+ cross-linking methods to prepare edible soy protein isolate (SPI) and sodium alginate (SA) interpenetrating polymer network hydrogels to overcome the disadvantages of traditional interpenetrating polymer network (IPN) hydrogels, such as poor performance, high toxicity, and inedibility. The influence of changes in SPI and SA mass ratio on the performance of SPI-SA IPN hydrogels was investigated.

RESULTS

Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to characterize the structure of the hydrogels. Texture profile analysis (TPA), rheological properties, swelling rate, and Cell Counting Kit-8 (CCK-8) were used to evaluate physical and chemical properties and safety. The results showed that, compared with SPI hydrogel, IPN hydrogels had better gel properties and structural stability. As the mass ratio of SPI-SA IPN changed from 1:0.2 to 1:1, the gel network structure of hydrogels also tended to be dense and uniform. The water retention and mechanical properties of these hydrogels, such as storage modulus (G'), loss modulus (G"), and gel hardness increased significantly and were greater than those of the SPI hydrogel. Cytotoxicity tests were also performed. The biocompatibility of these hydrogels was good.

CONCLUSIONS

This study proposes a new method to prepare food-grade IPN hydrogels with mechanical properties of SPI and SA, which may have strong potential for the development of new foods. © 2023 Society of Chemical Industry.

Microbiological transglutaminase: Biotechnological application in the food industry

Microbial transglutaminases (mTGs) belong to the family of global TGs, isolated and characterised by various bacterial strains, with the first being Streptomyces mobaraensis. This literature review also discusses TGs of animal and plant origin. TGs catalyse the formation of an isopeptide bond, cross-linking the amino and acyl groups. Due to its broad enzymatic activity, TG is extensively utilised in the food industry. The annual net growth in the utilisation of enzymes in the food processing industry is estimated to be 21.9%. As of 2020, the global food enzymes market was valued at around $2.3 billion USD (mTG market was estimated to be around $200 million USD). Much of this growth is attributed to the applications of mTG, benefiting both producers and consumers. In the food industry, TG enhances gelation and modifies emulsification, foaming, viscosity, and water-holding capacity. Research on TG, mainly mTG, provides increasing insights into the wide range of applications of this enzyme in various industrial sectors and promotes enzymatic processing. This work presents the characteristics of TGs, their properties, and the rationale for their utilisation. The review aims to provide theoretical foundations that will assist researchers worldwide in building a methodological framework and furthering the advancement of biotechnology research.

Regulation mechanism of ionic strength on the ultra-high freeze-thaw stability of myofibrillar protein microgel emulsions

The regulation mechanism of ionic strength (0-1000 mM) on the freeze-thaw (FT) stability of emulsions stabilized by myofibrillar protein microgel particles (MMP) was systematically investigated. High ionic strength emulsions (300-1000 mM) exhibited stability after five FT cycles. With ionic strength increasing, the repulsive force between particles gradually reduced, the flocculation degree (20.72 ∼ 75.60%) and apparent viscosity of emulsions gradually rose (69 ∼ 170 mPa·s), promoting the formation of protein network structures in the continuous phase. Concurrently, the interfacial proteins rearranged (18.8 ∼ 104.2 s^-1) and aggregated rapidly, facilitating the formation of a stable interface network structure, ultimately improving its stability. Besides, scanning electron microscopy (SEM) images revealed that the interfacial proteins gradually aggregated, further forming a network with the MMP in the continuous phase, allowing MMP emulsions with enhanced FT stability at high ionic strength (300-1000 mM). This study was beneficial to produce emulsion-based sauces with ultra-high FT stability.

Whey Protein-Tannic Acid Conjugate Stabilized Emulsion-Type Pork Sausages: A Focus on Lipid Oxidation and Physicochemical Features

The purpose of this study was to investigate the oxidative stability and physicochemical properties of pork emulsion sausages with whey protein-tannic acid conjugate and native whey protein. Over the course of 21 days, the thiobarbituric acid reactive substances (TBARS) of sausages containing a whey protein-tannic acid conjugate were lower than those of sausages with regular whey protein (p < 0.05). Kinetically, sausage containing the whey protein-tannic acid conjugate (k = 0.0242 day^-1) appeared to last longer than sausage containing regular whey protein (k = 0.0667 day^-1). The addition of the whey protein-tannic acid conjugate had no effect on product texture because there was no difference in hardness, springiness, cohesiveness, or water-holding capacity between the control and treated samples at Day 0 (p > 0.05). Scanning electron microscopy revealed that, at Day 21, the control sausage exhibited emulsion coalescence, as evidenced by an increase in the number of oil droplets and large voids, but not the whey protein-tannic acid conjugate-added sausage. There was no variation in the L*, a*, and b* values of the sausages when the whey protein-tannic acid conjugate was added (p > 0.05). However, there was a little increase in ΔE value in the treated sample. Thus, the whey-protein-tannic acid conjugate appeared to stabilize the lipid and physicochemical properties of the sausages by lowering the rate of TBARS production, retaining texture, water-holding capacity, and color, as well as by minimizing lipid coalescence during refrigerated storage.

Physicochemical, structural and in vitro gastrointestinal tract release properties of ι-carrageenan/sodium caseinate synbiotic microgels produced by double-crosslinking with calcium ions and transglutaminase

The aim of this study was to develop ι-carrageenan (ιC)/sodium caseinate (NaCas) synbiotic microgels loading Lacticasebacillus paracasei produced by double-crosslinking with calcium ions and different concentrations (0, 5, 10, and 15 U/g protein) of transglutaminase (TGase). The synbiotic microgels were coated/filled with pectic oligosaccharide (POS). Field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD) analyses indicated that L. paracasei was successfully microencapsulated in synbiotic microgels. In Fourier transform infrared (FT-IR) analysis, the new formation of covalent and ionic crosslinking was observed in double-crosslinked synbiotic microgels. The encapsulation efficiency of L. paracasei was significantly increased from 87.82 to 97.68 % by increasing the concentration of TGase from 0 to 15 U/g protein, respectively. After exposure to simulated gastric fluid for 2 h and simulated intestinal fluid for 4 h, the survival rate of L. paracasei was significantly increased as the concentration of TGase increased.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Effect of transglutaminase-catalyzed crosslinking behavior on the quality characteristics of plant-based burger patties: A comparative study with methylcellulose

Transglutaminase (TGase) is gaining increasing recognition as a novel and healthier bio-binder for meat analogs. This work focused on the TGase-induced crosslinking behaviors, and then evaluated the difference in quality characteristics (Texture, water distribution, cooking properties, volatile flavor and protein digestibility) of peanut protein-based burger patties treated with TGase and traditional binder (methylcellulose, MC). TGase-catalyzed crosslinking, enabling amino acids to participate in the formation of covalent bonds rather than non-covalent bonds, and promoted the formation of protein aggregates and dense gel networks by changing the protein structure, ultimately improving the quality characteristics of burger patties. Compared with the TGase treatment, MC-treated burger patties showed a greater texture parameter, lower cooking loss, higher flavor retention but a lower degree of digestibility. The findings will contribute to a better understanding of the roles of TGase and traditional binders in plant-based meat analogs.

Tailoring a novel ovalbumin emulsion gel for stability improvement and functional properties enhancement: Effect of oil phase structure changes by beeswax

This study aimed to form a novel emulsion gel (EG) through structured oil phase of natural component beeswax (BW), together with ovalbumin (OVA), and to investigate the mechanism of its formation and stabilization in terms of microstructure and processing properties. Confocal laser scanning microscopy (CLSM) demonstrated that the EG formed a continuous double network structure since the superior crystallinity of the oil phase was given by BW. Fourier transform infrared spectroscopy (FT-IR) illustrated that the acylation of the phenolic hydroxyl group in BW with an amide bond in OVA, increased the hydrogen bonding of EG. Furthermore, the immobilization of the oil phase results in better thermal and freeze-thaw stability of EG. Finally, EG was used as a curcumin delivery system, and the presence of BW significantly improved its adaptability to multiple environmental factors. In summary, our study would provide valuable ideas for developing the design of finely structured functional food.

Effects of ultrasound treatment on the morphological characteristics, structures and emulsifying properties of genipin cross-linked myofibrillar protein

Genipin is a natural crosslinker that improves the functional properties of proteins by modifying its structures. This study aimed to investigate the effects of sonication on the emulsifying properties of different genipin concentration-induced myofibrillar protein (MP) cross-linking. The structural characteristics, solubility, emulsifying properties, and rheological properties of genipin-induced MP crosslinking without sonication (Native), sonication before crosslinking (UMP), and sonication after crosslinking (MPU) treatments were determined, and the interaction between genipin and MP were estimated by molecular docking. The results demonstrated that hydrogen bond might be the main forces for genipin binding to the MP, and 0.5 μM/mg genipin was a desirable concentration for protein cross-linking to improve MP emulsion stability. Ultrasound treatment before and after crosslinking were better than Native treatment to improve the emulsifying stability index (ESI) of MP. Among the three treatment groups at the 0.5 μM/mg genipin treatment, the MPU treatment group showed the smallest size, most uniform protein particle distribution, and the highest ESI (59.89%). Additionally, the highest α-helix (41.96%) in the MPU + G5 group may be conducive to the formation of a stable and multilayer oil-water interface. Furthermore, the free groups, solubility, and protein exposure extent of the MPU groups were higher than those of UMP and Native groups. Therefore, this work suggests that the treatment of cross-linking followed by ultrasound (MPU) could be a desirable approach for improving the emulsifying stability of MP.

The preparation of soy glycinin/sugar beet pectin complex network gels catalyzed by laccase under weakly acidic conditions

BACKGROUND

Traditional soy protein gel products such as tofu, formed from calcium sulfate or magnesium chloride, have poor textural properties and water retention capacity. Soy glycinin (SG) is the main component affecting the gelation of soy protein and can be cross-linked with polysaccharides, such as sugar beet pectin (SBP), and can be modified by changing system factors (e.g., pH) to improve the gel's properties. Soy glycinin/sugar beet pectin (SG/SBP) complex double network gels were prepared under weakly acidic conditions using laccase cross-linking and heat treatment. The structural changes in SG and the properties of complex gels were investigated.

RESULTS

Soy glycinin exposed more hydrophobic groups and free sulfhydryl groups at pH 5.0. Under the action of laccase cross-linking, SBP could promote the unfolding of SG tertiary structures. The SG/SBP complex gels contained 46.77% β-fold content and had good gelling properties in terms of hardness 290.86 g, adhesiveness 26.87, and springiness 96.70 mm at pH 5.0. The T₂₂ relaxation time had the highest peak, and magnetic resonance imaging (MRI) showed that the gel had even water distribution. Scanning electron microscopy (SEM) and confocal scanning laser microscopy (CLSM) indicated that the SG/SBP complex network structure was uniform, and the pore walls were thicker and contained filamentous structures.

CONCLUSION

Soy glycinin/ sugar beet pectin complex network gels have good water-holding, rheological, and textural properties at pH 5.0. The properties of soy protein gels can be improved by binding to polysaccharides, with laccase cross-linked, and adjusting the pH of the solution. © 2022 Society of Chemical Industry.

Advances in preparation and application of food-grade emulsion gels

Emulsion gel is a semi-solid or solid material with a three-dimensional net structure produced from emulsion through physical, enzymatic, chemical methods or their combination. Emulsion gels are widely used in food, pharmaceutical and cosmetic industries as carriers of bioactive substances and fat substitutes due to their unique properties. The modification of raw materials, and the application of different processing methods and associated process parameters profoundly affect the ease or difficult of gel formation, microstructure, hardness of the resulting emulsion gels. This paper reviews the important research undertaken in the last decade focusing on classification of emulsion gels, their preparation methods, the influence of processing method and associated process parameters on structure-function of emulsion gels. It also highlights current status of emulsion gels in food, pharmaceutical and medical industries and provides future outlook on research directions requiring to provide theoretical support for innovative applications of emulsion gels, particularly in food industry.

Effect of High-Intensity Ultrasound Pretreatment on the Properties of the Transglutaminase (TGase)-Induced β-Conglycinin (7S) Gel

In this study, we investigated the effects of different high-intensity ultrasound (HIU) pretreatment times (0-60 min) on the structure of β-conglycinin (7S) and the structural and functional properties of 7S gels induced by transglutaminase (TGase). Analysis of 7S conformation revealed that 30 min HIU pretreatment significantly induced the unfolding of the 7S structure, with the smallest particle size (97.59 nm), the highest surface hydrophobicity (51.42), and the lowering and raising of the content of the α-helix and β-sheet, respectively. Gel solubility showed that HIU facilitated the formation of ε-(γ-glutamyl)lysine isopeptide bonds, which maintain the stability and integrity of the gel network. The SEM revealed that the three-dimensional network structure of the gel at 30 min exhibited filamentous and homogeneous properties. Among them, the gel strength and water-holding capacity were approximately 1.54 and 1.23 times higher than those of the untreated 7S gels, respectively. The 7S gel obtained the highest thermal denaturation temperature (89.39 °C), G', and G″, and the lowest tan δ. Correlation analysis demonstrated that the gel functional properties were negatively correlated with particle size and the α-helix, while positively with Ho and β-sheet. By contrast, gels without sonication or with excessive pretreatment showed a large pore size and inhomogeneous gel network, and poor properties. These results will provide a theoretical basis for the optimization of HIU pretreatment conditions during TGase-induced 7S gel formation, to improve gelling properties.

Effects of multi-frequency ultrasound on sodium caseinate/pectin complex: Emulsifying properties, interaction force, structure and correlation

This study aimed to improve the emulsification properties of the sodium caseinate (Cas) and pectin (Pec) complex using multi-frequency power ultrasound to regulate the complexation of Cas and Pec. The results revealed that optimal ultrasonic treatment (Frequency 60 kHz, power density 50 W/L, and time 25 min) led to a 33.12 % increase in emulsifying activity (EAI) and a 7.27 % increase in emulsifying stability index (ESI) of the Cas-Pec complex. Our results demonstrated that electrostatic interactions and hydrogen bonds were the main driving forces for complex formation, and these were reinforced by ultrasound treatment. Moreover, it was observed that ultrasonic treatment improved the surface hydrophobicity, thermal stability, and secondary structure of the complex. Scanning electron microscopy and atomic force microscopy analyses revealed that the ultrasonically prepared Cas-Pec complex had a dense, uniform spherical structure with reduced surface roughness. It was further confirmed that the complex's emulsification properties were highly correlated with its physicochemical and structural properties. Multi-frequency ultrasound changes the interaction by regulating protein structure and ultimately acting on the interfacial adsorption behavior of the complex. This work contributes to expanding the role of multi-frequency ultrasound in modifying the emulsification properties of the complex.

Preparation of plant-based meat analogs using emulsion gels: Lipid-filled RuBisCo protein hydrogels

RuBisCo from duckweed is a sustainable source of plant proteins with a high water-solubility and good gelling properties. In this study, we examined the impact of RuBisCo concentration (9-33 wt %) and oil droplet concentration (0 to 14 wt %) on the properties of emulsion gels designed to simulate the properties of chicken breast. The color (L*a*b*), water holding capacity (WHC), textural profile analysis, shear modulus, and microstructure of the emulsion gels were measured. The gel hardness and WHC increased significantly with increasing protein concentration, reaching values equivalent to chicken breast. The lightness of the emulsion gels was less than that of chicken breast, due to the presence of pigments (such as polyphenols) in the protein. Shear modulus versus temperature measurements showed that gelation began when the protein solutions were heated to around 40 °C and then the gels hardened appreciably when the temperature was further raised to 90 °C. The shear modulus of the gels then increased during cooling, which was attributed to the strengthening of hydrogen bonds at lower temperatures. The hardness of the gels increased slightly but then decreased when the oil droplet concentration was raised from 0 to 14 %. The lightness of the protein gels increased after adding the oil droplets, which was attributed to increased light scattering. Microstructure analysis showed that the RuBisCo proteins formed a particulate gel after heating, with the oil droplets being in the interstices between the particulates. In summary, RuBisCo proteins can be dissolved at high concentrations and can form strong emulsion gels. Consequently, they may be able to mimic the composition and textural attributes of real chicken.

Microencapsulated phase change material with chitin nanocrystals stabilized Pickering emulsion for thermal energy storage

The leakage during the phase change process and low thermal conductivity of PCMs limit their application area. In this study, Pickering emulsion stabilized with chitin nanocrystals (ChNCs) was used to prepare paraffin wax (PW) microcapsules by forming a dense melamine-formaldehyde resin shell on the surface of droplets. The PW microcapsules were then loaded into the metal foam to endow high thermal conductivity to the composite. The PW emulsions could be formed at low concentrations of ChNCs (0.3 wt%), and the PW microcapsules exhibits a favorable thermal cycling stability and a satisfactory latent heat-storage capacity over 170 J/g. Most importantly, the encapsulation of the polymer shell not only endows the microcapsules with high encapsulation efficiency of 98.8 %, non-leakage properties under prolonged high temperature conditions, but also with high flame retardancy. In addition, the composite of PW microcapsules/copper foam shows satisfactory performance in terms of thermal conductivity, thermal storage capacity and thermal reliability, which can be used for effective temperature regulation of heat generating materials. This study provides new design strategy of natural and sustainable nanomaterials stabilized PCMs, which shows promising application in the field of energy management and thermal equipment temperature regulation.

Development of soy protein isolate/sodium carboxymethyl cellulose synbiotic microgels by double crosslinking with transglutaminase and aluminum chloride for delivery system of Lactobacillus acidophilus

This study was carried out to develop soy protein isolate (SPI)/sodium carboxymethyl cellulose (NaCMC) synbiotic microgels by applying a double-crosslinking technique using transglutaminase and different concentrations of AlCl₃ (0, 6, 7, 8 %) and also by adding Lactobacillus acidophilus (L. acidophilus) and pectic oligosaccharide. Synbiotic microgels crosslinked using 8 % AlCl₃ (SPI/NaCMC-Al³⁺₈ microgels) showed the highest encapsulation efficiency (92 %). The double-crosslinked microgels exhibited a smooth surface as proved by SEM. FT-IR, XRD, and DSC analyses showed the possible interaction within matrices and demonstrated the higher thermal stability of synbiotic microgels prepared using a higher concentration of AlCl₃. All in all, after exposure to simulated digestion fluid, heat treatment (72 °C, 15 s), and refrigerated storage, more cells in double-crosslinked microgels survived compared to single-crosslinked microgels. In particular, probiotic viability was highest in SPI/NaCMC-Al³⁺₈ microgels. These results indicate that the SPI/NaCMC-Al³⁺₈ microgels developed in this study can effectively protect L. acidophilus against the external environment.

Fabrication of high strength cold-set sodium alginate/whey protein nanofiber double network hydrogels and their interaction with curcumin

Enhancing the bio-based hydrogels strength is fundamental to extend their engineering applications. In this study, high strength cold-set sodium alginate/whey protein nanofiber (SA/WPN) double network hydrogels were prepared and their interaction with curcumin (Cur) was studied. Our results indicated that the rheological and textural properties of SA/WPN double network hydrogels were enhanced with increasing WPN by forming SA-COO^--Ca²⁺-^-OOC-WPN bridge through electrostatic interactions. The storage modulus (768.2 Pa), hardness (273.3 g), adhesiveness (318.7 g·sec) and cohesiveness (0.464) of SA/WPN50 (WPN concentration of 50 mg/mL) double network hydrogels were 3.75, 2.26, 3.76 and 2.19 times higher than those of SA hydrogels, respectively. Cur was combined with SA/WPN hydrogels through hydrogen bonding, van der Waals forces and hydrophobic interactions with an encapsulation efficiency of 91.6 ± 0.8 %, and the crystalline state was changed after binding. In conclusion, SA/WPN double network hydrogels can be enhanced by the addition of WPN and have potential as carriers for hydrophobic bioactive substances.