A novel phytosterols delivery system based on sodium caseinate-pectin soluble complexes: Improving stability and bioaccessibility

Enhancing storage and gastroprotective viability of Lactiplantibacillus plantarum encapsulated by sodium caseinate-inulin-soy protein isolates composites carried within carboxymethyl cellulose hydrogel

Probiotics are subjected to various edible coatings, especially proteins and polysaccharides, which serve as the predominant wall materials, with ultrasound, a sustainable green technology. Herein, sodium caseinate, inulin, and soy protein isolate composites were produced using multi-frequency ultrasound and utilized to encapsulateLactiplantibacillus plantarumto enhance its storage, thermal, and gastrointestinal viability. The physicochemical analyses revealed that the composites with 5 % soy protein isolate treated with ultrasound at 50 kHz exhibited enough repulsion forces to maintain stability, pH resistance, and the ability to encapsulate larger particles and possessed the highest encapsulation efficiency (95.95 %). The structural analyses showed changes in the composite structure at CC, CH, CO, and amino acid residual levels. Rheology, texture, and water-holding capacity demonstrated the production of soft hydrogels with mild chewing and gummy properties, carried the microcapsules without coagulation or sedimentation. Moreover, the viability attributes ofL. plantarumevinced superior encapsulation, protecting them for at least eight weeks and against heat (63 °C), reactive oxidative species (H2O2), and GI conditions.

The Effect of Whey Protein Isolate Hydrolysate on Digestive Properties of Phytosterol

Phytosterol (PS) is a steroid, and its bioavailability can be enhanced by interacting with protein in the C-24 hydroxyl group. The interaction between sterols and amino acid residues in proteins can be enhanced by enzymatic hydrolysis. Phytosterol and whey insulation hydrolysates (WPH1-4) fabricated by the Alcalase enzyme at different enzymatic hydrolysis times were selected as delivery systems to simulate sterol C-24 hydroxyl group interaction with protein. Increasing hydrolysis time can promote the production of β-Lg, which raises the ratio of β-turn in the secondary structure and promotes the formation of interaction between WPH and PS. The correlation coefficient between hydrogen bonds and encapsulation efficiency (EE) and bioaccessibility is 0.91 and 0.88 (P < 0.05), respectively, indicating that hydrogen bonds of two components significantly influenced the combination by concealing the hydrophobic amino acids and some residues, which improved PS EE and bioavailability by 3.03 and 2.84 times after PS was combined with the WPI hydrolysate. These findings are expected to enhance the absorption of PS and other macromolecules by protein enzymatic hydrolysis to broaden their applications for food.

Effect of xanthan gum (XG) and carrageenan (CG) ratio on casein (CA)-XG-CG ternary complex: Used to improve the stability of liquid diabetes formula food for special medical purposes

Poor storage stability limits the application of liquid diabetes formula food for special medical purposes (L-D-FSMP) in maintaining blood sugar stability in diabetic patients. This work aims to improve the stability of L-D-FSMP by adjusting the ratio of xanthan gum (XG) and carrageenan (CG) in casein (CA)-XG-CG ternary complex. The centrifugal sedimentation rate results showed that the compound ratio of XG and CG had a greater impact on L-D-FSMP storage stability. Transmission electron microscopy (TEM) results showed that the combination of CA, XG and CG occurred. Fourier transform infrared spectroscopy (FTIR) results showed that CA, XG and CG were mainly combined through hydrogen bonds and ionic bonds to form a CA-XG-CG ternary complex. When the ratio of XG and CG was 1:1, the number of disulfide bonds was the largest. The results of three-phase contact angle and emulsifying ability confirmed that when the ratio of XG and CG was 1:1, CA-XG-CG had the strongest emulsifying ability. The particle size distribution and zeta-potential results showed that when the ratio of XG and CG was 1:1, L-D-FSMP had the narrowest particle size distribution range and the strongest stability. These results may provide valuable information for the production of stable L-D-FSMP.

Construction of a pectin/sodium alginate composite hydrogel delivery system for improving the bioaccessibility of phycocyanin

In this study, different concentrations of sodium alginate were compounded with pectin and phycocyanin to co-prepare composite hydrogel spheres (HP-PC-SA 0.2 %, 0.6 %, 1.0 %, 1.4 %) to evaluate the potential of the composite hydrogel spheres for the application as phycocyanin delivery carriers. The hydrogel spheres' physicochemical properties and bioaccessibility were assessed through scanning electron microscopy, textural analysis, drug-carrying properties evaluation, and in vitro and in vivo controlled release analysis in the gastrointestinal environment. Results indicated that higher sodium alginate concentrations led to smaller pore sizes and denser networks on the surface of hydrogel spheres. The textural properties of hydrogel spheres improved, and their water-holding capacity increased from 93.01 % to 97.97 %. The HP-PC-SA (1.0 %) formulation achieved the highest encapsulation rate and drug loading capacity, at 96.87 % and 6.22 %, respectively. Within the gastrointestinal tract, the composite hydrogel's structure significantly enhanced and protected the phycocyanin's digestibility, achieving a bioaccessibility of up to 88.03 %. In conclusion, our findings offer new insights into improving functionality and the effective use of phycocyanin via pectin-based hydrogel spheres.

Chitosan-coated soybean protein isolate/lecithin nanoparticles for enhancing the stability and bioaccessibility of phytosterol

BACKGROUND

Phytosterols (PS) have various beneficial effects on human health, especially the property of reducing blood cholesterol. However, the low solubility and bioaccessibility of PS have greatly limited their application in functional food ingredients.

RESULTS

To improve the bioaccessibility and stability of PS, chitosan-coated PS nanoparticles (CS-PNP) were successfully prepared by self-assembly. The properties of CS-PNP, including size, zeta potential, encapsulation efficiency (EE) and loading amount (LA) were characterised. The optimisation of CS concentration (0.4 mg mL-1) and pH (3.5) resulted in the formation of CS-PNP with an EE of over 90% and a particle size of 187.7 nm. Due to the special properties of CS chitosan, the interaction between CS and soybean protein isolate (SPI)/lecithin (SL) led to the formation of a soluble complex. CS-PNP exhibited good stability to temperature variations but was more sensitive to salt ions. During in vitro digestion, CS efficiently maintained the stability of nanoparticles against the hydrolysis of SPI by pepsin under acidic conditions. However, these nanoparticles tended to aggregate in a neutral intestinal environment. After 3 h of in vitro digestion, the bioaccessibility of PS increased from 18.2% of free PS to 63.5% of CS-PNP.

CONCLUSION

Overall, these results highlight the potential of chitosan-coated nanoparticles as effective carriers for the oral administration of PS. This multilayer construction may serve as a promising for applications in food products as delivery vehicles for nutraceuticals. © 2024 Society of Chemical Industry.

Improved bioavailability and antioxidation of β-carotene-loaded biopolymeric nanoparticles stabilized by glycosylated oat protein isolate

The limited bioavailability of β-carotene hinders its potential application in functional foods, despite its excellent antioxidant properties. Protein-based nanoparticles have been widely used for the delivery of β-carotene to overcome this limitation. However, these nanoparticles are susceptible to environmental stress. In this study, we utilized glycosylated oat protein isolate to prepare nanoparticles loaded with β-carotene through the emulsification-evaporation method, aiming to address this challenge. The results showed that β-carotene was embedded into the spherical nanoparticles, exhibiting relatively high encapsulation efficiency (86.21 %) and loading capacity (5.43 %). The stability of the nanoparticles loaded with β-carotene was enhanced in acidic environments and under high ionic strength. The nanoparticles offered protection to β-carotene against gastric digestion and facilitated its controlled release (95.76 % within 6 h) in the small intestine, thereby leading to an improved in vitro bioavailability (65.06 %) of β-carotene. This improvement conferred the benefits on β-carotene nanoparticles to alleviate tert-butyl hydroperoxide-induced oxidative stress through the upregulation of heme oxygenase-1 and NAD(P)H quinone dehydrogenase 1 expression, as well as the promotion of nuclear translocation of nuclear factor-erythroid 2-related factor 2. Our study suggests the potential for the industry application of nanoparticles based on glycosylated proteins to effectively deliver hydrophobic nutrients and enhance their application.

Fabrication and characterization of pectin-zein nanoparticles containing tanshinone using anti-solvent precipitation method

Tanshinone compounds are secondary metabolites which their application in food and pharmaceutical industry is limited due to the low solubility in water and sensitivity to heat. This study aimed to develop a novel biopolymer nanocarriers system based on pectin/zein for the encapsulation of tanshinone compounds using the anti-solvent precipitation method. The concentration of pectin and mass ratio of tanshinone/zein in the final formulation of nanoparticles were optimized. According to the results, a pectin concentration of 1 g/L and a tanshinone/zein ratio of 0.1:1 g/g were considered the optimal nanoparticle formulation. The resulting nanoparticles exhibited a spherical core-shell structure, with approximate values for size, zeta potential, TSI, and encapsulation efficiency of 132 ± 0.002 nm, -38.6 ± 0.019 mV, 0.600 ± 0.084, and 79.41 ± 0.62 %, respectively. The FTIR test confirmed the presence of hydrophobic, hydrogen, and electrostatic interactions among the constituents within the nanoparticles. Additionally, XRD and DSC tests verified the amorphous nature of the nanoparticles. Morphological examination conducted through TEM, and SEM revealed the characteristics of the resulting nanoparticles. Furthermore, this carrier system significantly enhanced the solubility of tanshinone compounds in water.

Current and New Insights on Delivery Systems for Plant Sterols in Food

Plant sterols are minor bioactive components of food lipids, which are often used for the formulation of functional foods due to their cholesterol-lowering properties. However, they have low solubility and tend to crystallize, which may affect their biological effects, the sensory profile of the sterol-enriched food, and its consumer acceptability. Moreover, due to the unsaturated structure of sterols, they are susceptible to oxidation, so different encapsulation systems have been developed to improve their dispersibility/solubility, stability, delivery, and bioaccessibility. This chapter provides an overview of the main encapsulation systems currently used for plant sterols and their application in model and food systems, with a particular focus on their efficiency and impact on sterol bioaccessibility.

Microencapsulation of green coffee oil by complex coacervation of soy protein isolate, sodium casinate and polysaccharides: Physicochemical properties, structural characterisation, and oxidation stability

This study developed a combination method between protein-polysaccharide complex coacervation and freezing drying for the preparation of green coffee oil (GCO) encapsulated powders. Different combinations of soy protein isolate, sodium caseinate, sodium carboxymethylcellulose, and sodium alginate were utilised as wall materials. The occurrence of complexation between the biopolymers were compared to the final emulsion of the individual protein and confirmed by fourier transform infrared spectrometry and X-ray diffraction. The mean diameter and estimated PDI of GCO microcapsules were 72.57-295.00 μm and 1.47-2.02, respectively. Furthermore, the encapsulation efficiency of GCO microcapsules was between 61.47 and 90.01 %. Finally, oxidation kinetics models of GCO and its microcapsules demonstrated that the zero-order model of GCO microcapsules was found to have a higher fit, which could better reflect the quality changes of GCO microcapsules during storage. Different combinations of proteins and polysaccharides exhibited effective oxidative stability against single proteins because of polysaccharide addition. This research revealed that soy protein isolate, sodium caseinate combined with polysaccharides can be used as a promising microencapsulating agent for microencapsulation of GCO, especially with sodium carboxymethylcellulose and sodium alginate, and provided useful information for the potential use of GCO in the development of powder food.

Complexes of glycated casein and carboxymethyl cellulose enhance stability and control release of anthocyanins

To improve the stability and sustained-release property of anthocyanins (ACNs), casein (CA) - dextran (DEX) glycated conjugates (UGCA) and carboxymethyl cellulose (CMC) were used to prepare ACNs-loaded binary and ternary complexes. The ACNs-loaded binary complexes (ACNs-UGCA) and ternary complexes (ACNs-UGCA-CMC) achieved by 8 min' ultrasonic treatment with 40 % amplitude. The binary and ternary complexes showed spherical structure and good dispersibility, with the average size of 121.2 nm and 132.4 nm respectively. The anthocyanins encapsulation efficiency of ACNs-UGCA-CMC increased almost 20 % than ACNs-UGCA. ACNs-UGCA-CMC had better colloidal stabilities than ACNs-UGCA, such as thermal stability and dilution stability. Simultaneously, both of the binary and ternary complexes significantly prevented anthocyanins from being degraded by heat treatment, ascorbic acid, sucrose and simulated gastrointestinal environment. The protective effect of ACNs-UGCA-CMC was more significant. Furthermore, ACNs-UGCA-CMC showed slower anthocyanins release in simulated releasing environment in vitro and a long retention time in vivo. Our current study provides a potential delivery for improving the stability and controlling release of anthocyanins.

A curcumin oral delivery system based on sodium caseinate and carboxymethylpachymaran nanocomposites

The food industry has paid lots of attentions to curcumin because of its potential bioactive qualities. However, its use is severely constrained by its low bioavailability, stability and water solubility. Herein, we created sodium caseinate and carboxymethylpachymaran (CMP) nanoparticles (SMCNPs) that were loaded with curcumin. The composite nanoparticles were spherical, as characterized by SEM and TEM, the fluorescence spectroscopy, FTIR and XRD research revealed that hydrogen bonding, hydrophobic interaction and electrostatic interaction were the main drivers behind the creation of the nanoparticles. The SMCNPs exhibited lower particle size, greater dispersion and higher encapsulation rate when the mass ratio of sodium caseinate to CMP was 3:5 (particle size of 166.8 nm, PDI of 0.15, and encapsulation efficiency of 88.07 %). The composite nanoparticles had good antioxidant activity, physical stability and sustained release effect on intestinal tract during the in vitro simulation experiments, successfully preventing the early release of curcumin into gastric fluid. Finally, cytotoxicity studies told that the prepared composite nanoparticles have good biocompatibility and can inhibit the growth of tumor cells (HT-29). In conclusion, using CMP and sodium caseinate as carriers in this study may open up a fresh, environmentally friendly, and long-lasting way to construct a bioactive material delivery system.

Excipient emulsion prepared with pectin and sodium caseinate to improve the bioaccessibility of carotenoids in mandarin juice: The effect of emulsifier and polymer concentration

Excipient emulsions were prepared using different emulsifiers (pectin and sodium caseinate, individually or compositely) to study the emulsifying properties and their co-digested effects on the retention and bioaccessibility of carotenoids in mandarin juice, which is a good source of carotenoids in people's diet. Results showed that both pectin (PC) and pectin-sodium caseinate (PC-SC) emulsion significantly increased the carotenoids retention and bioaccessibility of mandarin juice, with the effects depending on both emulsifiers and polymer concentration. Whether for PC or PC-SC emulsion, lower pectin content accompanied with lower viscosity showed higher carotenoids bioaccessibility. And for the complexed emulsions, appropriate sodium caseinate addition could be more beneficial in improving carotenoids bioaccessibility. It had been found that the viscosity comparing with particle size seemed to play a more important role in affecting carotenoid bioaccessibility during the co-digestion. This study could provide a basis for improving the carotenoids bioaccessibility in the real system of fruits and vegetables with excipient emulsions.

Nutritional composition, health-promoting effects, bioavailability, and encapsulation of tree peony seed oil: a review

Tree peony is cultivated worldwide in large quantities due to its exceptional ornamental and medicinal value. In recent years, the edible value of tree peony seed oil (TPSO) has garnered significant attention for its high content of alpha-linolenic acid (ALA, >40%) and other beneficial minor components, including phytosterols, tocopherols, squalene, and phenolics. This review provides a systematic summary of the nutritional composition and health-promoting effects of TPSO, with a specific focus on its digestion, absorption, bioavailability, and encapsulation status. Additionally, information on techniques for extracting and identifying adulteration of TPSO, as well as its commercial applications and regulated policies, is included. Thanks to its unique nutrients, TPSO offers a wide range of health benefits, such as hypolipidemic, anti-obesity, cholesterol-lowering, antioxidant and hypoglycemic activities, and regulation of the intestinal microbiota. Consequently, TPSO shows promising potential in the food and cosmetic industries and should be cultivated in more countries. However, the application of TPSO is hindered by its low bioavailability, poor stability, and limited water dispersibility. Therefore, it is crucial to develop effective delivery strategies, such as microencapsulation and emulsion, to overcome these limitations. In conclusion, this review provides a comprehensive understanding of the nutritional value of TPSO and emphasizes the need for further research on its nutrition and product development.

Biosynthesis of Quercetin-Loaded Melanin Nanoparticles for Improved Antioxidant Activity, Photothermal Antimicrobial, and NIR/pH Dual-Responsive Drug Release

Quercetin (QCT) is a promising dose-dependent nutraceutical that usually suffers from poor water solubility and low bioavailability issues. In this work, a novel QCT-loaded nanoscale delivery system was constructed based on the oxidative self-polymerization of melanin (Q@MNPs). The FT-IR, XRD, and Zeta potential analyses confirmed that QCT was successfully absorbed on the melanin nanoparticles (MNPs) via Π-Π and hydrogen bonding interactions. The encapsulation efficiency and particle size of Q@MNPs were 43.78% and 26.68 nm, respectively. Q@MNPs improved the thermal stability of QCT and the antioxidant properties in comparison to MNPs. Meanwhile, Q@MNPs presented fantastic photothermal conversion capacity and stability triggered by the NIR laser, which significantly enhanced the antibacterial capability with a sterilization rate of more than 98% against E. coli and S. aureus. More importantly, Q@MNPs exhibited NIR/pH dual-responsive drug release behavior and good biocompatibility (at concentrations of < 100 μg/mL). Thus, Q@MNPs show promising prospects for flavonoid delivery.

Preparation, Characterization and Application of the Delivery System for Food Products

In the dynamic and evolving landscape of food science and technology, the quest to develop innovative and effective delivery systems for bioactive compounds remains a focal point of research and development [...].

Combination of Nanodelivery Systems and Constituents Derived from Novel Foods: A Comprehensive Review

Novel Food is a new category of food, regulated by the European Union Directive No. 2015/2283. This latter norm defines a food as "Novel" if it was not used "for human consumption to a significant degree within the Union before the date of entry into force of that regulation, namely 15 May 1997". Recently, Novel Foods have received increased interest from researchers worldwide. In this sense, the key areas of interest are the discovery of new benefits for human health and the exploitation of these novel sources of materials in new fields of application. An emerging area in the pharmaceutical and medicinal fields is nanotechnology, which deals with the development of new delivery systems at a nanometric scale. In this context, this review aims to summarize the recent advances on the design and characterization of nanodelivery systems based on materials belonging to the Novel Food list, as well as on nanoceutical products formulated for delivering compounds derived from Novel Foods. Additionally, the safety hazard of using nanoparticles in food products, i.e., food supplements, has been discussed in view of the current European regulation, which considers nanomaterials as Novel Foods.

Enhancing the Stability and Bioaccessibility of Tree Peony Seed Oil Using Layer-by-Layer Self-Assembling Bilayer Emulsions

Tree peony seed oil (TPSO) is an important plant source of n-3 polyunsaturated fatty acid (α-linolenic acid, ALA > 40%) that is receiving increasing attention for its excellent antioxidant and other activities. However, it has poor stability and bioavailability. In this study, a bilayer emulsion of TPSO was successfully prepared using a layer-by-layer self-assembly technique. Among the proteins and polysaccharides examined, whey protein isolate (WPI) and sodium alginate (SA) were found to be the most suitable wall materials. The prepared bilayer emulsion contained 5% TPSO, 0.45% whey protein isolate (WPI) and 0.5% sodium alginate (SA) under selected conditions and its zeta potential, droplet size, and polydispersity index were -31 mV, 1291 nm, and 27%, respectively. The loading capacity and encapsulation efficiency for TPSO were up to 84% and 90.2%, respectively. It was noteworthy that the bilayer emulsion showed significantly enhanced oxidative stability (peroxide value, thiobarbituric acid reactive substances content) compared to the monolayer emulsion, which was accompanied by a more ordered spatial structure caused by the electrostatic interaction of the WPI with the SA. This bilayer emulsion also exhibited markedly improved environmental stability (pH, metal ion), rheological properties, and physical stability during storage. Furthermore, the bilayer emulsion was more easily digested and absorbed, and had higher fatty acid release rate and ALA bioaccessibility than TPSO alone and the physical mixtures. These results suggest that bilayer emulsion containing WPI and SA is an effective TPSO encapsulation system and has significant potential for future functional food development.

Improved antioxidant activity of rutin via lipase-mediated esterification with oleic acid

BACKGROUND

Oxidation is a major problem for oils and fats, which can be mitigated by antioxidants. Rutin has excellent antioxidant activity, but its poor lipid solubility greatly limits its practical application. In this study, an efficient enzymatic synthesis route of lipophilic rutin ester was established using oleic acid as an acyl donor, and the antioxidant potential of rutin oleate was evaluated for the first time by proton (¹ H) nuclear magnetic resonance (NMR) spectroscopy.

RESULTS

The synthesized product was finally identified as rutin oleate by Fourier transform infrared, high-performance liquid chromatography-mass spectrometry, and ¹ H, carbon-13, and DEPT-135 NMR analyses, and the acylation site was the 4‴-OH of the rhamnose group in the rutin molecule. The maximum conversion was over 93% after 48 h of reaction using Novozym 435 as catalyst under the best conditions among these tests. The conversion of rutin ester decreased with the increase of carbon chain length and the number of carbon-carbon double bonds of the fatty acid molecule. Most importantly, rutin oleate exhibited antioxidant capacity comparable to butylated hydroxytoluene and its counterparts (rutin and oleic acid) at low temperatures (60° C), but had a significant advantage at high temperatures (120° C).

CONCLUSION

The antioxidant activity of rutin was significantly enhanced by lipase-mediated esterification with oleic acid. Therefore, rutin oleate could be further developed as a novel antioxidant for use in oil- and fat-based foods. © 2023 Society of Chemical Industry.

The properties and formation mechanism of ovalbumin-fucoidan complex

The polymeric materials formed by proteins and polysaccharides through molecular interactions have attracted public attention. In this study, a novel binary complex consisting of ovalbumin (OVA) and fucoidan (FUC) was obtained by electrostatic self-assembly. The self-assembly properties and the formation mechanism of the OVA-FUC binary complex were investigated by changing the charging degree and density of complex through altering pH value and polysaccharides proportion. Structural changes during the OVA-FUC electrostatic self-assembly process were investigated by a phase diagram, ζ-potential, and particle size. The optimal conditions for preparing soluble OVA-FUC binary complex were determined by the protein retention rate and insoluble solids content. Results showed that the soluble OVA-FUC binary complex could be obtained at the pH of 3.5 to 5, and the insoluble OVA-FUC binary complex was generated at the pH of 2.5 to 3.5. The OVA-FUC binary complex (19 ± 0.29 mN/m) possessed a medium ability to reduce interfacial tension of the water-oil interface compared with OVA (15 ± 1.13 mN/m) and FUC (24 ± 0.3 mN/m), indicating that OVA-FUC binary complex has good amphiphilicity and can be applied as a potential pH-controlled emulsifier in function food systems for delivering bioactive substances.

Enzymatically hydrolyzed sodium caseinate nanoparticles efficiently enhancing the solubility, stability, and antioxidant and anti-biofilm activities of hydrophobic Tanshinone IIA

Enzymatic hydrolysis has been validated as an appropriate strategy for improving the properties of natural protein. Here, we used enzymatic hydrolysis sodium caseinate (Eh NaCas) as a nano-carrier for enhancing the solubility, stability, and antioxidant and anti-biofilm activities of hydrophobic encapsulants. Tanshinone IIA (TA) was loaded into the hydrophobic regions of Eh NaCas by self-assembly, and the encapsulation efficiency could reach 96.54 ± 0.14% under an optimized host-guest ratio. After Eh NaCas packed, the TA-loaded Eh NaCas nanoparticles (Eh NaCas@TA) showed regular spheres, uniform particle size distribution and more optimal drug release. Moreover, the solubility of TA in aqueous solution increased over 2.4 × 10⁵ times, and the TA guest molecules displayed excellent stability under light and other harsh environments. Interestingly, the vehicle protein and TA exhibited synergistic antioxidant effects. Furthermore, Eh NaCas@TA forcefully restrained the growth and destroyed the biofilm construction of Streptococcus mutans compared to free TA, showing positive antibacterial activity. The establishment of these results demonstrated the feasibility and functionality of edible protein hydrolysates as nano-carriers for loading natural plant hydrophobic extracts.

Soy proteins as vehicles for enhanced bioaccessibility and cholesterol-lowering activity of phytosterols

BACKGROUND

The formulation of phytosterol (PS)-enriched functional foods has attracted increasing interest in the recent years, owing to its potential health effects. However, the poor solubility and bioavailability greatly limit PS application in this regard. This study investigated whether soy protein isolate (SPI) could effectively perform as a nanocarrier for improving the water solubility, bioaccessibility, and cholesterol-lowering activity of PSs.

RESULTS

In this work, we fabricated SPI-PS nanocomplexes, which not only can enhance the stability and bioaccessibility of PS, but also improve the cholesterol-lowering ability of SPI. This improvement was mainly due to the formation of protein-active substance complexes, through hydrophobic interactions. The complexation with PSs resulted in formation of nanosized particles with greater sizes, lower ζ-potential, and higher surface hydrophobicity. The encapsulation efficiency, loading amount, and solubility of PS were closely related to the applied PS concentration in the mixed dispersions, and the maximal PS solubility in the aqueous phase reached about 1.63 mg mL^-1 at the highest PS concentration (2.0 mg mL^-1 ). The PS molecules in the nanocomplexes were mainly present in the amorphous form. The enhanced in vitro cholesterol-lowering activity of PS nanocomplexes relative to free PS seemed to be closely related to its higher bioaccessibility.

CONCLUSION

The findings are of relevance for the development of food-grade PS ingredients suitable for the formulations of PS-enriched functional foods. © 2022 Society of Chemical Industry.

Sea buckthorn pulp and seed oils ameliorate lipid metabolism disorders and modulate gut microbiota in C57BL/6J mice on high-fat diet

Introduction

Non-alcoholic fatty liver diseases (NAFLD), along with the complications of obesity and dyslipidemia, are worldwide lipid metabolism disorders. Recent evidence showed that NAFLD could be ameliorated by diet and lifestyles by attenuating gut microbiota dysbiosis via the gut-liver axis. Sea buckthorn oils, including sea buckthorn pulp oil (SBPO) and sea buckthorn seed oil (SBSO), were investigated in this study for their beneficial effects on gut-liver axis in C57BL/6J mice on a high-fat diet.

Methods

Sixty of male C57BL/6J mice were assigned into five groups, fed with low-fat diet containing soybean oil (SO), high-fat diet comprising lard oil (LO), peanut oil (PO), SBSO or SBPO, respectively, for 12 weeks. Serum and hepatic biochemical analysis, liver and perirenal fat histological analysis, and fecal 16S rRNA gene sequencing were conducted to reflect the influence of five diets on gut-liver axis.

Results

Dietary SBPO reduced visceral fat accumulation, adipose cell size, serum and hepatic triglyceride, LDL-C levels, and hepatic cell damage score; increased gut microbiota diversity with a higher abundance of Lactobacillus, Roseburia, and Oscillibacter compared with PO. SBSO showed equal or weaker effects compared to SBPO.

Conclusion

This study demonstrates that dietary SBPO has the potential to ameliorate NAFLD and related metabolic disorders, like obesity and dyslipidemia, by modulating gut microbiota.

Micro-Encapsulation of Phytochemicals in Passion Fruit Peel Waste Generated on an Organic Farm: Effect of Carriers on the Quality of Encapsulated Powders and Potential for Value-Addition

The passion (Passiflora edulis Sims) fruit peel is rich in phenolics and other bioactive compounds and has great potential as a natural food preservative. The present study investigated the value-adding potential of passion fruit peel waste generated on an organic farm. The effect of carriers in encapsulating the peel extract to develop a polyphenolic-rich powder was investigated. The passion fruit peel extracts were prepared using 70% ethanol (1:10 w/v), and encapsulated using waxy starch (WS), gum arabic (GA), and maltodextrin (MT) before freeze-drying. The effects of carriers on the passion fruit peel powder (PFPP) production yield, physicochemical, rheological, phytochemical, and antioxidant properties were investigated. GA-and MT-encapsulated powders had better physical, phytochemical, and antioxidant properties, including yield, total soluble solids, solubility, bulk density, total phenolic content, and ferric reducing antioxidant powder. A total of 18 metabolites, including phenolic acids (10), flavonoids (6), and stilbenes (2), were tentatively identified in all the PFPP samples, with WS exhibiting a higher concentration of the compounds compared to GA and MT. Our results indicated that no single carrier was associated with all the quality attributes; therefore, better results could be produced by compositing these carriers. Nonetheless, our results highlight the potential of passion fruit peels as a source of polyphenols and functional ingredient in formulating natural food additives.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

Biocompatible Polyelectrolyte Complex Nanoparticles for Lycopene Encapsulation Attenuate Oxidative Stress-Induced Cell Damage

In this study, lycopene was successfully encapsulated in polyelectrolyte complex nanoparticles (PEC NPs) fabricated with a negatively charged polysaccharide, TLH-3, and a positively charged sodium caseinate (SC) via electrostatic interactions. Results showed that the lycopene-loaded PEC NPs were spherical in shape, have a particle size of 241 nm, have a zeta potential of −23.6 mV, and have encapsulation efficiency of 93.6%. Thus, lycopene-loaded PEC NPs could serve as effective lycopene carriers which affected the physicochemical characteristics of the encapsulated lycopene and improved its water dispersibility, storage stability, antioxidant capacity, and sustained release ability in aqueous environments when compared with the free lycopene. Moreover, encapsulated lycopene could enhance the cells' viability, prevent cell apoptosis, and protect cells from oxidative damage through the Nrf2/HO-1/AKT signalling pathway, via upregulation of antioxidase activities and downregulation of MDA and ROS levels. Therefore, the biocompatible lycopene-loaded PEC NPs have considerable potential use for the encapsulation of hydrophobic nutraceuticals in the food and pharmaceutical industries.

Production, Characterization, Delivery, and Cholesterol-Lowering Mechanism of Phytosterols: A Review

Phytosterols are natural plant-based bioactive compounds that can lower blood cholesterol levels and help prevent cardiovascular diseases. Consequently, they are being utilized in functional foods, supplements, and pharmaceutical products designed to improve human health. This paper summarizes different approaches to isolate, purify, and characterize phytosterols. It also discusses the hypolipidemic mechanisms of phytosterols and their impact on cholesterol transportation. Phytosterols have a low water-solubility, poor chemical stability, and limited bioavailability, which limits their utilization and efficacy in functional foods. Strategies are therefore being developed to overcome these shortcomings. Colloidal delivery systems, such as emulsions, oleogels, liposomes, and nanoparticles, have been shown to be effective at improving the water-dispersibility, stability, and bioavailability of phytosterols. These delivery systems can be used to incorporate phytosterols into a broader range of cholesterol-lowering functional foods and beverages. We also discuses several issues that need to be addressed before these phytosterol delivery systems can find widespread commercial utilization.