Effects of the interaction between bacterial cellulose and soy protein isolate on the oil-water interface on the digestion of the Pickering emulsions

Applications of bacterial cellulose in the food industry and its health-promoting potential

Bacterial cellulose (BC) is a naturally occurring biomaterial with a wide range of potential applications in the food industry because of its exceptional mechanical qualities, unique nanofiber structure, high purity, and outstanding biocompatibility. Beyond its physical attributes, BC has gained interest recently due to research demonstrating its potential health benefits as a functional food ingredient. This article examines the many uses of BC in the food business, with a focus on how it may enhance food texture, operate as a bioactive carrier, and have promise in the packaging sector. Further research was done on the health-promoting properties of BC in functional foods, particularly with regard to its functions as a blood glucose regulator, and gastrointestinal health. This review seeks to bring fresh ideas for the study of bioactive components in the food industry by providing a summary of the existing research and demonstrating the possible role of BC in food. It also suggests future paths for research.

Effect of carrageenan on stability and 3D printing performance of high internal phase pickering emulsion stabilized by soy protein isolate aggregates under neutral condition

High internal phase Pickering emulsion (HIPPE) stabilized by heat induced soy protein isolate aggregates (HSPI) alone had limited stability and poor 3D printing performance. While there is few research about HIPPE stabilized by HSPI and polysaccrides at neutral pH condition, where HSPI and ĸ-carrageenan (CG) were combined to fabricate HIPPE in this research. It was found that the incorporation of CG significantly decreased the droplet size and improved the storage stability of the resulting HIPPE. Moreover, the presence of CG improved the freeze-thaw stability of HIPPE after one freeze-thaw cycle. In addition, the addition of CG significantly improved the structural integrity of the 3D printed HIPPE and enhanced the printing precision. This was because the presence of CG decreased the interfacial tension, increased the zeta potential and viscosity of HSPI-CG, thus promoting the adsorption of particles to the oil-water interface more effectively. Moreover, the presence of CG significantly enhanced the viscoelasticity of the resulting HIPPE. These results can be further attributed to the strong hydrogen bonding and hydrophobic interaction between HSPI and CG at neutral pH condition, which can be confirmed from results of Fourier-transform infrared spectroscopy and Isothermal titration calorimeter. So the incorporation of CG endowed HIPPE with more excellent properties at a lower solid particle concentration.

Insights into the oil-water interfacial adsorption properties of whey protein-γ-oryzanol Pickering emulsion gel during in vitro simulated digestion

This work elucidated the digestion behavior of low-oil phase Pickering emulsion gel (LOPPEG) stabilized by whey protein isolate (WPI) -γ-Oryzanol (γO) aggregated particles and interfacial adsorption properties of its simulated digestion products. Initially, following simulated digestion, WPI-γO LOPPEG exhibited lower free fatty acid release and protein digestibility compared to WPI LOPPEG. WPI-γO LOPPEG maintained lower interfacial tension and higher interfacial thickness than WPI LOPPEG. The quartz crystal microbalance results further demonstrated that the viscoelasticity and oil-water interfacial adsorption quality of WPI-γO LOPPEG were higher than those of WPI LOPPEG. Ultimately, WPI-γO/pH 7.5 LOPPEG showed the best interfacial adsorption characteristics and anti-digestive properties. This work could provide the theoretical guidance for the development of the slow-digestive foods.

Effect of wet media milling on starch-quercetin complex: Enhancement of Pickering emulsifying ability and oxidative resistance

This research explored the effect of media milling on complexation of corn starch (CS) and quercetin (QC), interaction mechanism and Pickering emulsifying ability of corn-quercetin (CS-QC) complex. CS-QC with QC/CS ratio of 1:24 had the highest encapsulation efficiency of 76.00 ± 1.30 %. Average volume-mean diameter, average whole molecular size (Rh) and debranchedamylopectinchain length of CS-QC were significantly decreased after milling. Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) spectra confirmed the complexation between CS and QC. Emulsifying capacity and emulsion stability of Pickering emulsion stabilized by 5 % CS-QC complex particles after 120 min milling reached 100.00 % and 100.00. Pickering emulsions stabilized by these complex particles demonstrated superior oxidative stability. These results demonstrated that media milling could be an efficient physical approach to obtain starch-polyphenol complex by enhancing non-covalent interactions, which could not only be used as food-grade Pickering emulsifiers, but also retard lipid oxidation.

Construction of myofibrillar protein-based Pickering emulsion for grass carp (Ctenopharyngodon idellus) based on interfacial self-assembly of spice aldehyde molecules: Mechanism and application of imine reaction-stabilized emulsion

The purpose of this research is to investigate multiple structural spice aldehydes (cinnamaldehyde (CA), citronellal (CN), and melonal (MA)) interact with myofibrillar protein in grass carp (GCMP) and the effects of interfacial interactions on stability properties of Pickering emulsion. It was demonstrated that the functional characteristics of interfacial protein might be greatly improved by the complexation of spice aldehydes with protein particles at the water-oil interface. The fluorescence quenching and molecular docking results revealed that the binding mode of spice aldehyde is primarily dominated by hydrophobic interactions, yet there are hydrogen bonding interactions exist in special structure. When comparing multiple structure aldehyde, CA has a greater binding affinity than CN and MA, as well as the most binding sites at different temperatures. Among them, the interaction of CA and GCMP is enhanced by forming hydrogen bonds through π-bonds owing to its special aromatic ring structure. The O/W structure was further stabilized by the formation of conjugated and unconjugated imines of interfacial protein with spice aldehydes. This work provides a theoretical basis for the interaction and development of protein particles with spice aldehyde in Pickering emulsion stabilization and novel ideas for the application of low value aquatic protein for high quality.

Carvacrol-loaded nanoemulsions stabilized by soy protein isolate / chitooligosaccharide conjugates inhibited the oxidation and conformational variations of myofibrillar proteins in refrigerated sea bass (Lateolabrax maculatus)

Soy isolate protein / chitooligosaccharide (SPI/COS) glycosylated conjugates was prepared and employed as an emulsifier to stabilize carvacrol-loaded nanoemulsions (CNE-SPI/COS). The effects of CNE-SPI/COS on the oxidation and aggregation of myofibrillar protein (MPs) from sea bass (Lateolabrax maculatus) were investigated. Samples were immersed in sterile water (CK), SPI/COS solution and CNE-SPI/COS solution, respectively, follow by a 15-day refrigerated storage. MPs were extracted from fish fillets at 3-day intervals, then assessed for the oxidation degree and conformational changes in MPs, as well as structural variations in myofibrils. Compared with the CK group, the results obtained from protein oxidation assessment clarified that the oxidation and aggregation of MPs was significantly reduced by the CNE-SPI/COS treatment, as evidenced by the higher total sulfhydryl content and Ca2+-ATPase activity and lower surface hydrophobicity. Conformational analysis of MPs showed that CNE-SPI/COS was effective in maintaining the ordered secondary structure of MPs and reducing the exposure of hydrophobic residues in the hydrophobic core of the tertiary structure. In addition, CNE-SPI/COS was found to be effective in protecting the microstructure of muscle fibers and myofibrils in fish fillets. These results suggest that CNE-SPI/COS can be a promising method to prevent protein oxidation and aggregation in fish.

Study on the stability, functional activity and preservation effect of oregano essential oil Pickering emulsion with different proportions of chicken bone gelatin/bacterial cellulose during storage

In this study, chicken bone gelatin (CBG) was extracted as a new substitute for traditional pig bone gelatin, and bacterial cellulose (BC) was used as the compound to prepare Oregano essential oil (OEO) Pickering emulsion. To explore a protein/polysaccharide emulsion system that can effectively prolong the functional activity of OEO during storage. The results indicated that the variation in CBG and BC content significantly influenced the physicochemical properties of the emulsions. The optimal formulation of OEO Pickering emulsion, prepared with a CBG-BC ratio of 6:2 (v/v), exhibited superior characteristics including appearance, encapsulation efficiency, and stability during preservation. After 7 d of storage at 4 °C, the rheological properties remained stable, with no significant differences observed in antioxidant and antibacterial activities. It was verified in the beef fresh-keeping experiment that the shelf life of beef samples in the 6-2-2 treatment group was 6 d longer than that in the control group and 3 d longer than that in the pure OEO group. This experiment enhanced the utilization of poultry by-products and provided a valuable reference for exploring suitable protein-polysaccharide systems embedding active substances for food preservation.

Pickering emulsion of pepper essential oil stabilized by Octenyl succinic acid starch: Characterization, in vitro release and anticancer activity

Under high humidity and high temperature conditions, the quality of pepper essential oil easily deteriorates, and the oxidation of oil restricts its application, especially for the insolubility in water. This study investigated pepper essential oil encapsulated in Pickering emulsion with octenyl succinic acid starch, which was effectively able to reduce 100 times of the release rate. The smooth surface and complete particles of the emulsion were observed and no new chemical bonds were formed. The minimum particle sizes were 2.05 µm and 1.89 µm, when the Pickering emulsion was set to different storage conditions at pH 5 and 0.1 M NaCl, respectively. During gastrointestinal digestion, the release of essential oils was effectively delayed in the Pickering emulsion and the digestibility of the emulsion was 16.93% in 120 min. Compared with untreated cells, Pickering emulsion can effectively inhibit the proliferation of MCF-7 (52.71%). All these results indicate that OSA starch stabilized pepper essential oil can effectively increase solubility, improve stability, and expand the application range. Therefore, it can provide a theoretical basis for applications of pepper essential oil, especially for the functional drug application.

In Vitro Gastrointestinal Digestion of Corn-Oil-in-Water Pickering Emulsions: Influence of Lignin-Containing Cellulose Nanofibrils Loading

There is a growing trend in incorporating biomass-based engineered nanomaterials into food products to enhance their quality and functionality. The zeta potential, droplet size, microstructure, and content of free fatty acid (FFA) release were determined to investigate the influence of a plant-derived particle stabilizer, i.e., lignin-containing cellulose nanofibrils (LCNFs). Remarkable differences were observed during digestion stages, which were found to be correlated with the concentrations of LCNFs. The gradual FFA release in the small intestine stage from LCNF-coated lipid droplets was monitored over time, with a final lowest release of FFAs amounting to 26.3% in the emulsion containing 20.0% (v/v) of the dispersed phase stabilized by 3 mg/mL of LCNFs. This release can be attributed to the physical barrier at lipid droplet surfaces and the network effect created by the free LCNFs in the continuous phase. This work provides a foundation for the potential application of nature-derived LCNF materials in reducing fat absorbance.

Ultrasonic-assisted green extraction and incorporation of Spirulina platensis bioactive components into turmeric essential oil-in-water nanoemulsion for enhanced antioxidant and antimicrobial activities

The utilization of essential oils as natural antioxidants and preservatives is limited by high volatility, poor water solubility, and long-term instability. To address this, a novel ultrasonic-assisted method was used to prepare and stabilize a nanoemulsion of turmeric essential oil-in-water, incorporating bioactive components extracted from Spirulina platensis. Ultrasonic treatment enhanced the extraction efficacy and nanoemulsion stability. Algal biomass subjected to ultrasonic treatment (30 min at 80% amplitude) yielded a dry extract of 73.66 ± 3.05%, with the highest protein, phenolic, phycocyanin, and allophycocyanin content, as well as maximum emulsifying activity. The resulting nanoemulsion (5% oil, 0.3% extract, 10 min ultrasonic treatment) showed reduced particle size (173.31 ± 2.24 nm), zeta potential (-36.33 ± 1.10 mV), low polydispersity index, and enhanced antioxidant and antibacterial properties. Rheology analysis indicated shear-thinning behavior, while microscopy and spectroscopy confirmed structural changes induced by ultrasonic treatment and extract concentration. This initiative developed a novel ultrasonic-assisted algal-based nanoemulsion with antioxidant and antibacterial properties.

Enhancing rheology and reducing lipid digestion of oil-in-water emulsions using controlled aggregation and heteroaggregation of soybean protein isolate-peach gum microspheres

There is a growing interest in developing highly viscous lipid foods using plant protein and polysaccharide gum-based emulsion technology. However, gaps remain in understanding the rheological, microstructural, and digestive properties of plant proteins like soybean protein isolate (SPI) in combination with various gums. This study investigates how combining SPI and peach gum (PG) affects rheology and lipolysis of oil-in-water (O/W) emulsions containing 20 wt% soybean oil. Emulsions with varying SPI and PG compositions including SPI-PG single and SPI/PG mixed droplet systems were prepared. Heating induced alterations in viscosity (e.g., SPI-PG from 14.88 to 90.27 Pa·s and SPI/PG from 9.66 to 85.32 Pa·s) and microstructure revealing aggregate formation at oil-water interface. The viscosity decreased significantly from the oral to intestinal phase (SPI-PG: 28.10 to 0.19 Pa·s, SPI/PG: 21.27 to 0.10 Pa·s). These changes affected lipid digestion, notably in SPI-PG and SPI/PG emulsions where a compact interface hindered lipolysis during digestion. Interestingly, free fatty acid (FFA) release during small intestinal phase followed a different order: SPI (82.51 %) > SPI-PG (70.77 %) > SPI/PG (63.60 %) > PG (56.09 %). This study provides insights into creating highly viscous O/W spreads with improved rheology, stability, and delayed lipid digestion, offering potential benefits in food product formulation.

Influence and mechanism of food matrices onto the TBBQ-eliminated performance during in-vitro digestion

Food matrices greatly impact TBBQ content during digestion, while lacking sufficient research and understanding. This study investigated the influence and mechanism of fried foods on the TBBQ-eliminated performance during in-vitro digestion. The results indicated that TBBQ content varied significantly among food matrices after in-vitro digestion, with the highest in peanuts (38.3%). The correlation analysis revealed that proteins remarkably facilitated TBBQ-eliminations while fats decreased the TBBQ-eliminated rate. The TBBQ-eliminated performance of proteins, protein digestive mixtures, and amino acids uncovered that sulfhydryl groups were crucial reactive groups to eliminate TBBQ, and TBBQ-eliminated rates under intestinal pH (8.0) were faster than gastric pH (1.5). Additionally, fats significantly reduced the protein-triggered TBBQ-eliminations, originating that the oil-water interface increased the interaction difficulty between lipophilic TBBQ and proteins. Thus, this work provided an in-depth understanding of food matrices (especially proteins and fats) in TBBQ eliminations to enlighten the promising TBBQ-risk-reduced strategies with high-protein and low-fat foods.

Fabrication and Stability Improvement of Monoglyceride Oleogel/Polyglycerol Polyricinoleate-Stabilized W/O High Internal Phase Pickering Emulsions

To decrease the lipid content in water-in-oil (W/O) emulsions, high internal phase Pickering W/O emulsions (HIPPE) were fabricated using magnetic stirring using a combination of monoglyceride (MAG) oleogel and polyglycerol polyacrylate oleate (PGPR) as stabilizers. Effects of MAGs (glyceryl monostearate-GMS, glycerol monolaurate-GML and glycerol monocaprylate-GMC) and internal phase components on the formation and properties of HIPPEs were investigated. The results showed that milky-white stabilized W/O HIPPE with up to 85 wt% aqueous phase content was successfully prepared, and the droplet interfaces presented a network of MAG crystals, independent of the MAG type. All HIPPEs exhibited great stability under freeze-thaw cycles but were less plastic. Meanwhile, GML-oleogel-based HIPPEs had larger particle size and were less thermal stable than GMS and GMC-based HIPPEs. Compared to guar gum, the internal phase components of sodium chloride and sucrose were more effective in reducing the particle size of HIPPEs, improving their stability and plasticity, and stabilizing them during 100-day storage. HIPPEs presented great spreadability, ductility and plasticity after whipping treatment. This knowledge provides a new perspective on the use of oleogels as co-stabilizers for the formation of W/O HIPPEs, which can be used as a potential substitute for creams.

Synergistic stabilization of high internal phase Pickering emulsions by peanut isolate proteins and cellulose nanocrystals for β-carotene encapsulation

In this study, high internal phase Pickering emulsions (HIPPEs) were stabilized by the complexes of peanut protein isolate (PPI) and cellulose nanocrystals (CNCs) for encapsulation β-carotene to retard its degradation during processing and storage. CNCs were prepared by H2SO4 hydrolysis (HCNCs), APS oxidation (ACNCs) and TEMPO oxidation (TCNCs), exhibiting needle-like or rod-like structures with nanoscale size and uniformly distributed around the spherical PPI particle, which enhanced the emulsifying capability of PPI. Results of optical micrographs and droplet size measurement showed that Pickering emulsions stabilized by PPI/ACNCs complexes exhibited the most excellent stability after 30 days of storage, which indicated that ACNCs had the most obvious effect to improve emulsifying capability of PPI. HIPPEs encapsulated β-carotene (βc-HIPPEs) were stabilized by PPI/ACNCs complexes and showed excellent inverted storage stability. Moreover, βc-HIPPEs exhibited typical shear thinning behavior investigated by rheological properties analysis. During thermal treatment, ultraviolet radiation and oxidation, the retentions of β-carotene encapsulated in HIPPEs were improved significantly. This research holds promise in expanding Pickering emulsions stabilized by proteins-polysaccharide particles to delivery systems for hydrophobic bioactive compounds.

Soy protein isolate-sodium alginate colloidal particles for improving the stability of high internal phase Pickering emulsions: Effects of mass ratios

The potential of sodium alginate (SA) at different mass ratios to improve the emulsifying ability of soy protein isolate (SPI) in high internal phase Pickering emulsions (HIPPEs) was evaluated in this work. SPI-SA particles were used as a natural particle stabilizer of HIPPEs with 80 % oil phase. The properties of particles with varying SPI to SA ratios (10:0, 10:1, 10:3, 10:5, 10:10, and 10:15 w/w) were evaluated. HIPPEs with a 10:10 SPI to SA ratio exhibited the smallest droplet sizes. Both the storage modulus and loss modulus of the HIPPEs increased with increasing SA addition ratios, implying that HIPPEs with higher SA addition have stronger gel characteristics. In addition, super-resolution microscopy and cryogenic scanning electron microscopy indicated that SA addition strengthened the compactness of the interface film and increased the distribution uniformity of HIPPEs. In conclusion, the combination of SPI and SA is beneficial for improving the performance of HIPPEs.

Tunability of Pickering particle features of whey protein isolate via remodeling partial unfolding during ultrasonication-assisted complexation with chitosan/chitooligosaccharide

The potential of ultrasonication-driven molecular self-assembly of whey protein isolate (WPI) with chitosan (CS)/chitooligosaccharide (COS) to stabilize Pickering emulsions was examined, based on CS/COS ligands-induced partial unfolding in remodeling the Pickering particles features. Multi-spectral analysis suggested obvious changes in conformational structures of WPI due to interaction with CS/COS, with significantly higher unfolding degrees of WPI induced by COS. Non-covalent interactions were identified as the major forces for WPI-CS/COS conjugates. Ultrasonication enhanced electrostatic interaction between CS's -NH3 groups and WPI's -COO- groups which improved emulsification activity and storability of WPI-COS stabilized Pickering emulsion. This was attributed to increased surface hydrophobicity and decreased particle size compared to WPI-CS associated with differential unfolding degrees induced by different saccharide ligands. CLSM and SEM consistently observed smaller emulsion droplets in WPI-COS complexes than WPI-CS/COS particles tightly adsorbed at the oil-water interface. The electrostatic self-assembly of WPI with CS/COS greatly enhanced the encapsulation efficiency of quercetin than those stabilized by WPI alone and ultrasound further improved encapsulation efficiency. This corresponded well with the quantitative affinity parameters between quercetin and WPI-CS/COS complexes. This investigation revealed the great potential of glycan ligands-induced conformational transitions of extrinsic physical disruption in tuning Pickering particle features.

Noncovalent interactions between biomolecules facilitated their application in food emulsions' construction: A review

The use of biomolecules, such as proteins, polysaccharides, saponins, and phospholipids, instead of synthetic emulsifiers in food emulsion creation has generated significant interest among food scientists due to their advantages of being nontoxic, harmless, edible, and biocompatible. However, using a single biomolecule may not always meet practical needs for food emulsion applications. Therefore, biomolecules often require modification to achieve ideal interfacial properties. Among them, noncovalent interactions between biomolecules represent a promising physical modification method to modulate their interfacial properties without causing the health risks associated with forming new chemical bonds. Electrostatic interactions, hydrophobic interactions, and hydrogen bonding are examples of noncovalent interactions that facilitate biomolecules' effective applications in food emulsions. These interactions positively impact the physical stability, oxidative stability, digestibility, delivery characteristics, response sensitivity, and printability of biomolecule-based food emulsions. Nevertheless, using noncovalent interactions between biomolecules to facilitate their application in food emulsions still has limitations that need further improvement. This review introduced common biomolecule emulsifiers, the promotion effect of noncovalent interactions between biomolecules on the construction of emulsions with different biomolecules, their positive impact on the performance of emulsions, as well as their limitations and prospects in the construction of biomolecule-based emulsions. In conclusion, the future design and development of food emulsions will increasingly rely on noncovalent interactions between biomolecules. However, further improvements are necessary to fully exploit these interactions for constructing biomolecule-based emulsions.

Controlled oxidation and digestion of Pickering emulsions stabilized by quinoa protein and (-)-epigallocatechin-3-gallate (EGCG) hybrid particles

In this study, we prepared Pickering emulsions stabilized by quinoa protein isolate (QPI) and (-)-epigallocatechin-3-gallate (EGCG) non-covalent hybrid particles using ultrasonic emulsification technique and demonstrated lipid oxidation and in vitro digestion process of Pickering emulsions. The interaction forces between QPI and EGCG were characterized using fluorescence spectroscopy, isothermal titration calorimetry, and Fourier transform infrared spectroscopy. Results indicated that the non-covalent QPI/EGCG hybrid particles were formed mainly via hydrophobic interactions, hydrogen bonds, and electrostatic interactions at pH 5. Then, the QPI/EGCG non-covalent hybrid particles were applied to modify the Pickering emulsion with ultrasonic homogenization. The rheological experimental results showed that the energy storage modulus (G') was higher than the loss modulus (G″), indicating that the emulsion had solid-like properties. As a physical barrier, interfacial layer fabricated by antioxidant QPI/EGCG hybrid particles limited lipid oxidation at 60 °C for 15 days. At 37 °C, the QPI/EGCG hybrid particles stabilized Pickering emulsions with robust antioxidant interfacial structure limited the lipid digestion under simulated gastrointestinal tract (gastric, small intestine phases). Thus, EGCG and quinoa proteins were more resistant to free radical oxidation and gastrointestinal digestion with the assistance of ultrasound. It provides a basis for better development of food and drug delivery systems by fully utilizing the antioxidant properties of plant polyphenols.

Tuning whey protein isolate/hyaluronic acid emulsion gel structure to enhance quercetin bioaccessibility and in vitro digestive characteristics

Quercetin (Que), a health-promoting polyphenol, has limited applicability in food products due to its susceptibility to degradation in the gastrointestinal tract. To overcome this problem, Que-loaded emulsion gels were produced using whey protein isolate (WPI) and hyaluronic acid (HA) by combining heating and CaCl2 treatment. The effects of HA addition on the structural and rheological properties of the emulsion gels were evaluated, and the protective effect of the gel on Que under simulated digestion was investigated in vitro. Microstructural observations indicated that HA leads to a more compact and uniform network structure, which significantly enhances the textural and rheological properties of emulsion gels. In vitro digestion experiments revealed that WPI-HA emulsion gels exhibited a higher Que bioaccessibility (55.01%) compared to that produced by WPI alone (21.26%). This innovative delivery carrier has potential applications in food products to accomplish sustained nutrient release along with improved stability.

High internal phase Pickering emulsions stabilised by ultrasound-induced soy protein-β-glucan-catechin complex nanoparticles to enhance the stability and bioaccessibility of curcumin

AIMS

To evaluate the potential applications of soy protein-glucan-catechin (SGC) complexes prepared with different ultrasound times in stabilising high internal phase Pickering emulsion (HIPPE) and delivering curcumin.

METHODS

The SGC complexes were characterised by particle size, morphology, zeta potential, Fourier transform infra-red, and fluorescence spectroscopy. Formation and stability of curcumin emulsions were monitored by droplet size, microstructure, rheological property, lipid oxidation, and in vitro digestion.

RESULTS

Short-time ultrasound-induced complexes (SGC-U15) exhibited a small size and wettability of ∼82.5°. The chemical stability and bioaccessibility of curcumin was greatly improved by SGC-U15-stabilised HIPPEs, even after 70 days of storage, heating at 100 °C for 30 min, ultraviolet irradiation for 120 min, and in vitro digestion, owing to the formation of elastic gel-like structure at the oil/water interfaces.

CONCLUSION

Our findings may contribute to the design of emulsion-based delivery systems using ultrasound-induced protein-polysaccharide-polyphenol complexes.

Characteristics of composite gels composed of citrus insoluble nanofiber and amylose and their potential to be used as fat replacers

Here, we prepared novel composite gels composed of citrus insoluble nanofiber and amylose, and examined their potential to be used as fat replacers and inhibit lipid digestion. We further evaluated the effect of different nanofiber/amylose ratios on the texture, thermal stability, water distribution, microstructure and lipid digestion of the composite gels. The addition of nanofiber improved the hardness, gumminess, viscoelasticity, thermal stability, and water-holding capacity of the composite gels, as well as strengthen their interpenetrating three-dimensional network. The gel prepared at a nanofiber/amylose ratio of 1:4 could provide an oral sensory perception similar to that of cream and therefore can be used as a potential fat replacer. Moreover, the emulsion stabilized by nanofiber/amylose could well inhibit lipid digestion, and the nanofiber/amylose ratio of 1:4 could achieve the minimum release amount of free fatty acids (55.81%). These findings provide a reference for the development of potential fat replacers.

Integral Valorization of Grape Pomace for Antioxidant Pickering Emulsions

Full harnessing of grape pomace (GP) agricultural waste for the preparation of antioxidant Pickering emulsions is presented herein. Bacterial cellulose (BC) and polyphenolic extract (GPPE) were both prepared from GP. Rod-like BC nanocrystals up to 1.5 µm in length and 5-30 nm in width were obtained through enzymatic hydrolysis (EH). The GPPE obtained through ultrasound-assisted hydroalcoholic solvent extraction presented excellent antioxidant properties assessed using DPPH, ABTS and TPC assays. The BCNC-GPPE complex formation improved the colloidal stability of BCNC aqueous dispersions by decreasing the Z potential value up to -35 mV and prolonged the antioxidant half-life of GPPE up to 2.5 times. The antioxidant activity of the complex was demonstrated by the decrease in conjugate diene (CD) formation in olive oil-in-water emulsions, whereas the measured emulsification ratio (ER) and droplet mean size of hexadecane-in-water emulsions confirmed the physical stability improvement in all cases. The synergistic effect between nanocellulose and GPPE resulted in promising novel emulsions with prolonged physical and oxidative stability.

Impact of interactions between peanut protein isolate and cellulose nanocrystals on the properties of Pickering emulsions: Rheological properties and physical stabilities

The interactions between cellulose nanocrystals and proteins can regulate the interfacial properties of Pickering emulsions, which plays a leading role in the stabilities of Pickering emulsions. In this work, oil-in-water (O/W) Pickering emulsions with different oil-water ratios were prepared using peanut protein isolate modified by cellulose nanocrystals (PPI/CL-CNCs). The distributions of PPI/CL-CNCs at the oil-water interfaces and the microstructures of Pickering emulsions were observed by CLSM and cryo-SEM. The results showed that stable complexes PPI/CL-CNCs formed thick and dense interface layers on the surface of oil droplets. The results of rheological tests clarified that the Pickering emulsions showed an elastic and gel texture, and their gel strength could be enhanced by regulating the oil-water ratios from 3:7 to 7:3. In addition, after one month of storage, the EI of all emulsions remained above 92 % with no obvious phase separation or demulsification. These results suggested that the PPI/CL-CNCs-stabilized Pickering emulsions showed good physical stabilities. The study on the rheological properties and physical stabilities of PPI/CL-CNCs-based Pickering emulsions provided novel insights on developing highly stable Pickering emulsions.

Interfacial adsorption behavior of the Aspergillus oryzae lipase-chitosan complex and stability evaluation of the resultant Pickering emulsion

To prompt the application of the chitosan (CS)-Aspergillus oryzae lipase (AOL) complex in the construction of novel biphasic catalysis medium, its Pickering emulsion stabilization ability as well as adsorption behavior in the oil-water interface were investigated and the stability of resultant emulsion was evaluated. The results indicated that the CS-AOL complex assembled in mass ratio 1:5 was an effective Pickering stabilizer and up to 90 % AOL could be retained in the emulsion interface. Quartz crystal microbalance with dissipation monitoring suggested that the CS-AOL complex spontaneously absorbed to oil-water interface; absorption dynamics analysis revealed that the adsorption was driven by diffusion accompanied by rapid structural rearrangement; while interfacial dilatational rheology demonstrated the formation of an elastic film in the oil-water interface. The Pickering emulsions were pseudoplastic and that in oil fraction 0.6 exhibited the elastic behavior in contrast to the viscous behavior in oil fractions 0.2 and 0.4. The Pickering emulsion exhibited excellent stability against storage for up to 28 d, pHs 2.0-12.0, heating at 25-90 °C, and up to 500 mmol/L NaCl, and the corresponding interfacial AOL retentions exceeded 80 % during exposure to these conditions. Hence, the CS-AOL complex could be used as a stabilizer to construct Pickering emulsion-based biphasic catalysis systems.

Recent advances in bioactive nanocrystal-stabilized Pickering emulsions: Fabrication, characterization, and biological assessment

Numerous literatures have shown the advantages of Pickering emulsion (PE) for the delivery of bioactive ingredients in the fields of food, medicine, and cosmetics, among others. On this basis, the multi-loading mode of bioactives (internal phase encapsulation and/or loading at the interface) in small molecular bioactives nanocrystal-stabilized PE (BNC-PE) enables them higher loading efficiencies, controlled release, and synergistic or superimposed effects. Therefore, BNC-PE offers an efficacious delivery system. In this review, we briefly summarize BNC-PE fabrication and characterization, with a focus on the processes of possible evolution and absorption of differentially applied BNC-PE when interacting with the body. In addition, methods of monitoring changes and absorption of BNC-PE in vivo, from the nanomaterial perspective, are also introduced. The purpose of this review is to provide an accessible and comprehensive methodology for the characterization and evaluation of BNC-PE after formulation and preparation, especially in relation to biological assessment and detailed mechanisms throughout the absorption process of BNC-PE in vivo.

Bacterial Cellulose Nanofibril-Based Pickering Emulsions: Recent Trends and Applications in the Food Industry

The Pickering emulsion stabilized by food-grade colloidal particles has developed rapidly in recent decades and attracts extensive attention for potential applications in the food industry. Bacterial cellulose nanofibrils (BCNFs), as green and sustainable colloidal nanoparticles derived from bacterial cellulose, have various advantages for Pickering emulsion stabilization and applications due to their unique properties, such as good amphiphilicity, a nanoscale fibrous network, a high aspect ratio, low toxicity, excellent biocompatibility, and sustainability. This review provides a comprehensive overview of the recent advances in the Pickering emulsion stabilized by BCNF particles, including the classification, preparation method, and physicochemical properties of diverse BCNF-based particles as Pickering stabilizers, as well as surface modifications with other substances to improve their emulsifying performance and functionality. Additionally, this paper highlights the stabilization mechanisms and provides potential food applications of BCNF-based Pickering emulsions, such as nutrient encapsulation and delivery, edible coatings and films, fat substitutes, etc. Furthermore, the safety issues and future challenges for the development and food-related applications of BCNFs-based Pickering emulsions are also outlined. This work will provide new insights and more ideas on the development and application of nanofibril-based Pickering emulsions for researchers.

Growth Inhibition of Sulfate-Reducing Bacteria during Gas and Oil Production Using Novel Schiff Base Diquaternary Biocides: Synthesis, Antimicrobial, and Toxicological Assessment

Upstream crude oil production equipment is always exposed to destruction damagingly which is caused by sulfate-reducing bacterium (SRB) activities that produce H2S gas, which leads to increased metal corrosion (bio-fouling) rates and inflicts effective infrastructure damage. Hence, oil and gas reservoirs must be injected with biocides and inhibitors which still offer the foremost protection against harmful microbial activity. However, because of the economic and environmental risks associated with biocides, the oil and gas sectors improve better methods for their usage. This work describes the synthesis and evaluation of the biological activities as the cytotoxicity and antimicrobial properties of a series of diquaternary cationic biocides that were studied during the inhibition of microbial biofilms. The prepared diquaternary compound was synthesized by coupling vanillin and 4-aminoantipyrene to achieve the corresponding Schiff base, followed by a quaternization reaction using 1,6-bromohexane, 1,8-bromooctane, and 1,12-bromododecane. The increase of their alkyl chain length from 6 to 12 methylene groups increased the obtained antimicrobial activity and cytotoxicity. Antimicrobial efficacies of Q1-3 against various biofilm-forming microorganisms, including bacteria and fungi, were examined utilizing the diameter of inhibition zone procedures. The results revealed that cytotoxic efficacies of Q1-3 were significantly associated mainly with maximum surface excess and interfacial characteristics. The cytotoxic efficiencies of Q1-3 biocides demonstrated promising results due to their comparatively higher efficacies against SRB. Q3 exhibited the highest cytotoxic biocide against the gram +ve, gram -ve, and SRB species according to the inhibition zone diameter test. The toxicity of the studied microorganisms depended on the nature and type of the target microorganism and the hydrophobicity of the biocide molecules. Cytotoxicity assessment and antimicrobial activity displayed increased activity by the increase in their alkyl chain length.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Effects of quinoa protein Pickering emulsion on the properties, structure and intermolecular interactions of myofibrillar protein gel

The effects of quinoa protein Pickering emulsion (QPE) on the gel properties, protein structure and intermolecular interactions of myofibrillar protein (MP) gels were studied. Compared with the MP gels without QPE, the MP gels with 5.0%-7.5% added QPE showed significant increasing trends in storage modulus (G'), whiteness, gel strength and water holding capacity (WHC). The content of disulfide bonds in the gel increased with the addition of QPE and the disulfide bond conformation changed from gauche-gauche-gauche to gauche-gauche-trans. Moreover, the increase of hydrogen bonds after QPE addition confirmed the transformation from α-helix to β-sheet, as β-sheet structure was stabilized by interchain hydrogen bonds. The added QPE also enhanced the hydrophobic interaction and electrostatic interaction of MP gels. To conclude, the addition of 5.0%-7.5% QPE improved the intermolecular interactions and the structure stability of MP gels, and enhanced the gelation and WHC of MP gels.