Enhanced extraction assisted by pressure and ultrasound for targeting RG-I enriched pectin from citrus peel wastes: A mechanistic study

Polysaccharide structure evaluation of Ganoderma lucidum from different regions in China based on an innovative extraction strategy

The polysaccharides and triterpenes are important functional components of Ganoderma lucidum, but traditional preparation process of G. lucidum functional components can only realize the preparation of single functional component, which has poor targeting and low efficiency. In this study, the existence state of the functional components of G. lucidum was revealed. Then, the single step extraction process for functional components was established, and the precise structure evaluation of polysaccharide and triterpenes was conducted based on the process. The results showed that preparation time required for this strategy is only one-sixth of the traditional one, and 50 % of raw materials can be saved. Structural analysis of the functional components revealed that triterpenes were mainly Ganoderic acid and Lucidenic acid, and the polysaccharide structure was mainly 1,3-glucan and 1,3,6-glucan. The establishment of single step extraction strategy and the evaluation of the fine structure of functional components improved the efficiency of preparation and result determination, and provided an important basis for the development and utilization of green and low-carbon G. lucidum and even edible fungi resources and human nutritional dietary improvement strategies.

Extensive Analysis of Mulberry (Morus rubra L.) Polysaccharides with Different Maturities by Using Two-Step Extraction and LC/QqQ-MS

A primary challenge of polysaccharide analysis is the need for comprehensive extraction and characterization methods. In this study, mulberry polysaccharides at different maturities were fully extracted through a two-step process involving ethylenediaminetetraacetic acid (EDTA) and sodium hydroxide (NaOH), and their structures were determined by a combination analysis of monosaccharides and glycosidic linkages based on liquid chromatography triple quadrupole mass spectrometry (LC/QqQ-MS). The results indicate mulberry polysaccharides mainly contain highly branched pectic polysaccharides, (1,3,6)-linked glucan, xylan, and xyloglucan, but the content of different portions varies at different maturity stages. HG decreases from 19.12 and 19.14% (green mulberry) to 9.80 and 6.08% (red mulberry) but increases to 17.83 and 11.83% as mulberry transitioned from red to black. In contrast, the contents of glucan showed opposite trends. When mulberry turns red to black, the RG-I arabinan chains decrease from 47.75 and 28.86% to 13.16 and 12.72%, while the galactan side chains increase from 1.18 and 1.91 to 8.3 and 6.49%, xylan and xyloglucan show an increase in content. Overall, the two-step extraction combined with LC/QqQ-MS provides a new strategy for extensive analysis of complex plant polysaccharides.

Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Methyl jasmonate regulation of pectin polysaccharides in Cosmos bipinnatus roots: A mechanistic insight into alleviating cadmium toxicity

Methyl jasmonate (MeJA), a crucial phytohormone, which plays an important role in resistance to Cadmium (Cd) stress. The cell wall (CW) of root system is the main location of Cd and plays a key role in resistance to Cd toxicity. However, the mechanism effect of MeJA on the CW composition and Cd accumulation remain unclear. In this study, the contribution of MeJA in regulating CW structure, pectin composition and Cd accumulation was investigated in Cosmos bipinnatus. Phenotypic results affirm MeJA's significant role in reducing Cd-induced toxicity in C. bipinnatus. Notably, MeJA exerts a dual impact, reducing Cd uptake in roots while increasing Cd accumulation in the CW, particularly bound to pectin. The molecular structure of pectin, mainly uronic acid (UA), correlates positively with Cd content, consistent in HC1 and cellulose, emphasizing UA as pivotal for Cd binding. Furthermore, MeJA modulates pectin methylesterase (PME) activity under Cd stress, influencing pectin's molecular structure and homogalacturonan (HG) content affecting Cd-binding capacity. Chelate-soluble pectin (CSP) within soluble pectins accumulates a substantial Cd proportion, with MeJA regulating both UA content and the minor component 3-deoxy-oct-2-ulosonic acid (Kdo) in CSP. The study delves into the intricate regulation of pectin monosaccharide composition under Cd stress, revealing insights into the CW's physical defense and Cd binding. In summary, this research provides novel insights into MeJA-specific mechanisms alleviating Cd toxicity in C. bipinnatus, shedding light on complex interactions between MeJA, and Cd accumulation in CW pectin polysaccharide.

Effects of extraction methods on the physicochemical properties and functionalities of pectic polysaccharides from burdock (Arctium lappa L.)

In this work, the effects of four different extraction methods, acid (HCl), alkali (NaOH), enzymes (cellulase/pectinase), and buffer (pH 7.0) on the physicochemical properties and functionalities of burdock pectin were systematically investigated and compared. Buffer extraction gave a low yield (2.8 %) and is therefore limited in its application. The acid treatment hydrolyzed the neutral sidechains and gave a homogalacturonan content of 72.6 %. By contrast, alkali and enzymes preserved the sidechains while degrading the polygalacturonan backbone, creating a rhamnogalacturonan-I dominant structure. The branched structure, low molecular weight, and high degree of methylation (42.3 %) contributed to the interfacial adsorption, emulsifying capacity, and cellular antioxidant activity of the enzyme-extracted product. For the acid-extracted product, the strong intramolecular electrostatic repulsion restricted the formation of a contact interface to prevent coalescence of the emulsion. In addition, they did not have sufficient reducing ends to scavenge free radicals. Although a high branching size (5.0) was adopted, the low degree of methylation (19.5 %) affected the emulsifying capacity of the alkali-extracted products. These results provide useful information for pectic polysaccharides production with tailored properties.

Potential role of cell wall pectin polysaccharides, water state, and cellular structure on twice "increase-decrease" texture changes during kohlrabi pickling process

Pickled kohlrabi is a traditional and favored vegetable product in China. During pickling, the hardness, springiness, and chewiness of kohlrabi all experienced a typical change with twice "increase-decrease" trend. However, little is known about its mechanism. In this study, in situ analysis including immunofluorescence, low field nuclear magnetic, and transmission electron microscopy were used to explore the effects of cell wall pectin, water state, and cellular structure on kohlrabi texture changes during pickling. Results revealed that at the early stage, due to the rapid loss of water after three times salting, the cells shrank and the interstitial space reduced, resulting in the first increase on kohlrabi texture. Subsequently, the dehydration-rehydration caused by the first brine processing resulted in the first decrease on kohlrabi texture. Then under the action of PME enzyme, more low-esterified pectin was produced, and chelate-soluble pectin with more branched structure was further formed, leading to another elevation of the sample texture. As the pickling continued, under the combined action of PG and PME, the molecular weight of pectin was decreased and the rigidity of the cell tissue was destroyed, caused kohlrabi texture continued to decline. These researches could provide important information and guidance for better maintaining the texture of pickled vegetables during processing.

Analysis of pectin-cellulose interaction in cell wall of lotus rhizome with assistance of ball-milling and galactosidase

The current study sought to depict the structural feature of polysaccharides extracted from Na2CO3 unextractable fraction (LUN) of lotus rhizome using galactosidase with assistance of ball milling. The extracted polysaccharides were a complex of cellulose microfibrils and the RG-I structural domain of pectin, and the top three monosaccharides were glucose, galactose and galactose uronic acid, which allowed to tune the properties of the enzyme-hydrolyzed polysaccharide from LUN after 15 and 45 min of ball milling. The data of XRD revealed that pectin has a masking effect on the diffraction peaks of cellulose components. The removing of the polysaccharides could increase the degree of crystallinity and the pectin-cellulose interaction mainly occured through the galactan side chain was speculated. Textural characterization by SEM exhibited a cross-linked rod-like structure, which is similar to the structure of cellulose microfibrils. The morphological analysis of AFM revealed that L15-P (enzyme-hydrolyzed polysaccharide from LUN after 15 min of ball milling) contained relatively ordered and uniform network structures. Overall, the present study provides an important insight into cell wall of lotus rhizome matrix polysaccharide.

A galacturonic acid-rich polysaccharide from Diospyros kaki peel: Isolation, characterization, rheological properties and antioxidant activities in vitro

This research elucidated the structural characteristics and antioxidant activity of a galacturonic acid-rich polysaccharide (PPP-2) isolated from Diospyros kaki peel. PPP-2 was extracted by subcritical water and subsequently purified by DEAE-Sepharose FF column. PPP-2 (12.28 kDa) mainly contained galacturonic acid, arabinose, and galactose with the molar ratios of 87.15: 5.86: 4.31. The structural characteristics of PPP-2 were revealed through FT-IR, UV, XRD, AFM, SEM, Congo red, methylation, GC/MS assay and NMR spectrum. PPP-2 owned the triple helical structure and degradation temperature of 251.09 ℃. The backbone of PPP-2 was formed by →4)-α-d-GalpA-6-OMe-(1→ and →4)-α-d-GalpA-(1→ with the side chains of →5)-α-l-Araf-(1→, →3)-α-l-Araf-(1→, →3,6)-β-d-Galp-(1→ and α-l-Araf-(1→. Moreover, the inhibitory concentration (IC₅₀) of PPP-2 to ABTS•+, DPPH•, superoxide radical and hydroxyl radical were 1.96, 0.91, 3.63, and 4.08 mg/mL, respectively. Our results suggested that PPP-2 might be a novel candidate of natural antioxidant in pharmaceuticals or functional food.

Gelation behaviors and mechanism of a new pectic polysaccharide from apple pomace as a potential gelatin substitute

In this study, we reported a pectic polysaccharide industrially obtained from apple pomace by metal ion precipitation technique showing an unexpected gelation behavior. Structurally, this apple pectin (AP) is a macromolecular polymer with a weight-average molecular weight (Mw) of 361.7 kDa, and DM (degree of methoxylation) of 12.5 %, comprising 60.38 % glucose, 19.41 % mannose, 17.60 % galactose and 1.00 % rhamnose and 1.61 % glucuronic acid. The low acidic sugar percentage relative to the total monosaccharide amount indicated a high branching structure of AP. On addition of Ca²⁺ ions, AP exhibited a remarkable gelling ability upon cooling its heat solution to low temperature (e.g., 4 °C). However, at room temperature (e.g., 25 °C) or in the absence of Ca²⁺, no gel was formed. At a fixed pectin concentration (0.5 %, w/v), AP showed increasing gel hardness and gelation temperature (T_gel) with CaCl₂ concentration increasing to 0.05 % (w/v); however, further addition of CaCl₂ weakened AP gels and even abolished the gelation. On reheating, all gels melted below 35 °C, which suggests the potential use of AP as a gelatin substitute. The gelation mechanism was explained as an intricate balance of the synchronous formation of hydrogen bond and Ca²⁺ crosslinks between AP molecules during cooling.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

Microwave-assisted extraction of pectin from jackfruit rags: Optimization, physicochemical properties and antibacterial activities

While fruit biowastes pose an environmental hazard, they can be utilized as a source of beneficial biopolymers such as pectin. However, conventional extraction techniques require long processing time with low, impure yields, and microwave assisted extraction (MAE) can suffer from these drawbacks. Here, MAE was applied to extract pectin from jackfruit rags and compared with conventional heating reflux extraction (HRE). Response surface methodology was adopted to optimize pectin yield, based on pH (1.0-2.0), solid-liquid ratio (1:20-1:30), time (5-90 min), and temperature (60-95 °C). Pectin extraction by MAE required lower temperatures (65.99 °C) and shorter reaction times (10.56 min). Pectin HRE resulted in a product with amorphous structures and rough surfaces, while pectin-MAE was high crystalline with smooth surfaces. Although both pectin samples showed shear-thinning behavior, pectin-MAE exhibited higher antioxidant and antibacterial activities. Therefore, microwave assisted extraction was an efficient method to extract pectin from jackfruit rags.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

Emerging challenges for the agro-industrial food waste utilization: A review on food waste biorefinery

Modernization and industrialization has undoubtedly revolutionized the food and agro-industrial sector leading to the drastic increase in their productivity and marketing thereby accelerating the amount of agro-industrial food waste generated. In the past few decades the potential of these agro-industrial food waste to serve as bio refineries for the extraction of commercially viable products like organic acids, biochemical and biofuels was largely discussed and explored over the conventional method of disposing in landfills. The sustainable development of such strategies largely depends on understanding the techno economic challenges and planning for future strategies to overcome these hurdles. This review work presents a comprehensive outlook on the complex nature of agro-industrial food waste and pretreatment methods for their valorization into commercially viable products along with the challenges in the commercialization of food waste bio refineries that need critical attention to popularize the concept of circular bio economy.