Improved thermal gelation of oat protein with the formation of controlled phase-separated networks using dextrin and carrageenan polysaccharides

Carrageenan-induced conjugated oat protein isolate microgel particles as structure modulators in fat analogues and their digestion behaviors

HYPOTHESIS

Engineering plant-based microgel particles (MPs) at a molecular scale is meaningful to prepare functional fat analogues. We hypothesize that oat protein isolate (OPI) and κ-carrageenan (CA) have synergy in MPs formation, using MPs with controllable structure, and further to fabricate fat analogues with adjustable characteristics is feasible. Their digestion fate will also be possibly modulated by interfacial coatings.

EXPERIMENTS

OPI-based conjugated MPs with tunable rigidities by changing crosslinking densities were designed. The relationship between microgel structures, and emulsion gel properties was explored through spectroscopy, microstructure, rheology and tribology. The delivery to lycopene, as well as inhibiting digestion behaviors of fat analogues was evaluated in a simulated gastro-intestinal tract.

FINDINGS

The rigidity of conjugated MPs could be tailored to optimize the performance of fat analogues. OPI-1 %CA MPs could stabilize emulsions up to 95 % oil fraction with fine texture. Tribological behaviors had a dependence on microgel elasticity and interfacial coatings, medium hard MP-stabilized emulsion was less disrupted without coalescence after oral processing. Digestion was delayed by denser and harder MPs by softening the interfacial particle layer or limiting lipase accessibility. Softer conjugated MPs possessed better flexibility and were broken down more easily leading to a higher rate of lipid digestion.

Effect of soluble dietary fiber on soy protein isolate emulsion gel properties, stability and delivery of vitamin D3

Emulsion gels with denser network microstructure and stronger mechanical properties have attracted increasing attentions for delivering lipophilic compounds. In this study, the effect of three distinct soluble dietary fiber (inulin (IN), resistant dextrin (RD) and stachyose (ST)) on the rheological, mechanical and microstructural properties of soy protein isolate (SPI) emulsion gel were firstly investigated. Compared with RD and IN, ST significantly accelerated water holding capacity and thermal stability, which exhibited more compact microstructure and more uniform emulsified oil droplets. Subsequently, the stability and bioavailability of vitamin D3 (VD3) in different delivery systems (medium chain triglycerides (MCT) embedding, SPI-ST emulsion embedding, SPI emulsion gel embedding and SPI-ST emulsion gel embedding) were continue evaluated. In vitro simulated digestion experiment demonstrated that the bioaccessibility of encapsulated VD3 in SPI-ST emulsion gel (69.95 %) was much higher than that of free embedding (48.99 %). In vivo pharmacokinetic experiment revealed that the bioavailability of VD3 was significantly enhanced in SPI-ST gel (p < 0.05), with the AUC0-24h value of 25-OH VD3 (the main circulating form of VD3) were 1.34-fold, 1.23-fold higher than that of free embedding, MCT embedding, respectively. These findings provide a possible approach for the development of high protein/fiber functional foods containing enhanced hydrophobic bioactives.

Yellow Field Pea Protein (Pisum sativum L.): Extraction Technologies, Functionalities, and Applications

Yellow field peas (Pisum sativum L.) hold significant value for producers, researchers, and ingredient manufacturers due to their wealthy composition of protein, starch, and micronutrients. The protein quality in peas is influenced by both intrinsic factors like amino acid composition and spatial conformations and extrinsic factors including growth and processing conditions. The existing literature substantiates that the structural modulation and optimization of functional, organoleptic, and nutritional attributes of pea proteins can be obtained through a combination of chemical, physical, and enzymatic approaches, resulting in superior protein ingredients. This review underscores recent methodologies in pea protein extraction aimed at enhancing yield and functionality for diverse food systems and also delineates existing research gaps related to mitigating off-flavor issues in pea proteins. A comprehensive examination of conventional dry and wet methods is provided, in conjunction with environmentally friendly approaches like ultrafiltration and enzyme-assisted techniques. Additionally, the innovative application of hydrodynamic cavitation technology in protein extraction is explored, focusing on its prospective role in flavor amelioration. This overview offers a nuanced understanding of the advancements in pea protein extraction methods, catering to the interests of varied stakeholders in the field.

Monovalent Salt and pH-Stimulated Gelation of Scallop (Patinopecten yessoensis) Male Gonad Hydrolysates/κ-Carrageenan

The gelation of scallop Patinopecten yessoensis male gonad hydrolysates (SMGHs) and κ-carrageenan (KC) subjected to pH (2-8, 3-9) and NaCl/KCl stimuli-response was investigated. SMGHs/KC gels subjected to a NaCl response exhibited an increasing storage modulus G'from 2028.6 to 3418.4 Pa as the pH decreased from pH 8 to 2, with corresponding T23 fluctuating from 966.40 to 365.64 ms. For the KCl-treated group, SMGHs/KC gels showed an even greater G' from 4646.7 to 10996.5 Pa, with T23 fluctuating from 622.2 to 276.98 ms as the pH decreased from 9 to 3. The improved gel strength could be ascribed to the blueshift and redshift of hydroxyl groups and amide I peaks, enhanced enthalpy and peak temperature, and gathered characteristic diffraction peaks from SMGHs, KC, NaCl, and KCl. The CLSM and cryo-SEM images further reflected that SMGHs/KC gels showed more flocculation formation and denser and more homogeneous networks with smaller pore sizes in more acidic domains, especially when subjected to the KCl response. This research gives a theoretical and methodological understanding of the construction of salt- and pH-responsive SMGHs/KC hydrogels as novel functional soft biomaterials applied in food and biological fields.

Rheological, textural, and water-immobilizing properties of mung bean starch and flaxseed protein composite gels as potential dysphagia food: The effect of Astragalus polysaccharide

The effects of Astragalus polysaccharide (APS) on rheological, textural, water-holding, and microstructural properties of mung bean starch (MBS)/flaxseed protein (FP) composite gels were investigated. Results showed that the storage modulus (G') of gels with APS were significantly lower than that of the control gel, while different concentrations of APS possessed diverse effects on the hardness, gumminess and cohesiveness of the gels. Adding APS significantly improved the water retention capacity by trapping more immobilized and free water in the gel network. Microstructurally, the MBS/FP/APS composite gels displayed a complex network with reduced pore size compared with that of the control gel (MBS/FP). International dysphagia diet standardization initiative (IDDSI) tests suggested that gels with APS contents below 0.09 % could be classified into level 6, while gel with 0.12 % APS could be categorized as level 7. Mechanistically, APS could influence the interactions between starch and protein within the tri-polymeric composite systems by affecting starch gelatinization and hydrogen bonding, further contributing to the formation of strengthened gel network and the change of gel properties. These results suggest that the macromolecular APS can improve the structural and textural properties of the starch-protein composite systems, and impart various functional properties to the FP-based gel foods.

pH-shifting alters textural, thermal, and microstructural properties of mung bean starch-flaxseed protein composite gels

The objective of this study was to investigate the effect of pH-shifting on the textural and microstructural properties of mung bean starch (MBS)-flaxseed protein (FP) composite gels. Results showed that different pH-shifting treatments caused changes in hydrogen bond interactions and secondary structures in composite gels, leading to the formation of loose or compact gel networks. The pH 2-shifting modified protein and starch molecules with shorter chains tended to form smaller intermolecular aggregates, resulting in the formation of a looser gel network. For pH 12-shifting treatment, conformational change of FP caused the unfolding of protein and the exposure of more hydrophobic groups, which enhanced the hydrogen bond and hydrophobic interactions between polymers, contributing to the formation of a compact gel network. Furthermore, pH 12-shifting improved the water-holding capacity (WHC), storage modulus, and strength of gels, while pH 2-treated gels exhibited lower WHC, hardness, and gumminess due to the degradation of MBS and denaturation of FP caused by extreme acid condition. These findings suggest that pH-shifting can alter the gel properties of bi-polymeric starch-protein composite systems by affecting the secondary structures of proteins and the hydrogen bonding between the polymers, and provide a promising way for a wide application of FP in soft gel-type food production.

Textural characterization of calcium salts-induced mung bean starch-flaxseed protein composite gels as dysphagia food

Effects of calcium gluconate (CG), calcium lactate (CL) and calcium dihydrogen phosphate (CDP) on the structural and functional properties of mung bean starch (MBS)-flaxseed protein (FP) composite gels were investigated to explore the feasibility of developing dysphagia food. The water-immobilizing, rheological and structural properties of MBS-FP composite gels adding different calcium salts (10, 30, and 50 mmol/L) were analyzed by low-field nuclear magnetic resonance measurement, rheological and textural analyses, fourier transform infrared spectroscopy, scanning electron microscopy and confocal laser scanning microscopy. Results showed that calcium salts imparted various soft gel properties to the composite gels by influencing the interactions between MBS and FP. Calcium salts could affect the conformation of amylose chains, accelerate the aggregation of FP molecules, and increase the cross-linking between starch and protein aggregates, resulting in the formation of large aggregates and a weak gel network. Consequently, calcium salts-induced composite gels showed lower viscoelastic moduli and gel strength than the control gel. In particular, different calcium salts had various impacts on the gel properties due to their diverse ability forming hydrogen bonds. Compared with CL and CDP, the gels containing CG presented the higher viscoelastic moduli and hardness, and possessed an irregular cellular network with the increased pore number and the decreased wall thickness. The gel containing 50 mmol/L CL had the highest water-holding capacity, in all the gels tested, by retaining more immobilized and mobile water in the compact gel network with larger cavities. The gels adding CDP presented lower hardness and gumminess due to the obvious lamellar structure within the network. International dysphagia diet standardization initiative (IDDSI) tests indicated that the gels adding CG and CL could be categorized into level 6 (soft and bite-sized) dysphagia diet, while the samples adding CDP could be classified into level 5 (minced and moist). These findings provide insights for the development of the novel soft gel-type dysphagia food.

Interactions involved in heat-induced gelatin gel containing hsian-tsao gum, and mechanisms to improve its properties

BACKGROUND

Hsian-tsao gum (HG) has unique gel-promoting and nutritional properties; however, its use in processed foods is limited to starchy foods, partially due to a lack of knowledge related to its interaction with proteins. This study elucidated the interaction mechanism of heat-induced gelatin (G) (50 g kg^-1 ) gel fortified with HG (0 ~ 20 g kg^-1 ) using rheology, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), large deformation tests, low-field nuclear magnetic resonance (LF-NMR), and confocal laser scanning microscopy (CLSM), and scanning electron microscopy (SEM).

RESULTS

Heating promoted synergistic interactions between G and more HG molecules with enhanced apparent viscosity and higher storage modulus G' than loss modulus G″, thus shortening the gel time (t_g ) of G-HG sols into gels. Fourier-transform infrared spectroscopy and DSC also confirmed the chemical interactions that occurred, facilitating the formation of β-sheet structures of G. The microstructure of G gradually formed separate, coarse strands, and aggregated as HG was added, as observed by CLSM and SEM. This accelerated the gel formation rate and changed the textural properties. Although HG caused a disruptive decrease in the helix structure of G, it was possible to compensate for this by accelerating synergistic interactions, including depletion attractions and Maillard reactions, by heating.

CONCLUSION

Hsian-tsao gum interacted synergistically with G as a result of heating and this accelerated the gel formation rate and improved the gel properties. Novel complex gels could be designed by blending HG to improve the gel properties of G in the heat processing of the food gel formulation. © 2022 Society of Chemical Industry.

Interaction-Induced Structural Transformations in Polysaccharide and Protein-Polysaccharide Gels as Functional Basis for Novel Soft-Matter: A Case of Carrageenans

Biocompatible, nontoxic, and biodegradable polysaccharides are considered as a promising base for bio-inspired materials, applicable as scaffolds in regenerative medicine, coatings in drug delivery systems, etc. The tunable macroscopic properties of gels should meet case-dependent requirements. The admixture of proteins to polysaccharides and their coupling in more sophisticated structures opens an avenue for gel property tuning via physical cross-linking of components and the modification of gel network structure. In this review recent success in the conformational studies of binary protein-polysaccharide gels is summarized with the main focus upon carrageenans. Future perspectives and challenges in rational design of novel polysaccharide-based materials are outlined.

Evaluation of ultrasound-assisted L-histidine marination on beef M. semitendinosus: Insight into meat quality and actomyosin properties

This paper aimed to evaluate the effects of ultrasound-assisted L-histidine marination (UMH) on meat quality and actomyosin properties of beef M. semitendinosus. Our results found that UMH treatment effectively avoided excessive liquid withdrawal, and disrupted myofibril integrity by modifying the water distribution and weakening connection of actin-myosin with increased muscle pH. The ultrasound-treated sample provided more opportunity for the filtration of L-histidine to intervene the isoelectric point and conformation of muscle protein. The activated caspase-3 and changes of ATPase activity in UMH-treated meat accelerated the postmortem ageing, and L-histidine might competitively inhibit the actin-myosin binding by the imidazole group. UMH decreased the surface hydrophobicity by shielding hydrophobic area and unfolding the actomyosin structure. In addition, the increased actomyosin solubility with smaller particle size enhanced the SH content for better cross-linking of myosin tail, and formation of heat-set gelling protein structure. Therefore, UMH treatment manifested the potential to improve beef quality.

Oat Protein Concentrates with Improved Solubility Produced by an Enzyme-Aided Ultrafiltration Extraction Method

The aim of this study was to develop an extraction method to produce highly functional oat protein concentrates. We investigated the possibility of combining enzyme-aided slightly alkaline (pH 8.0) extraction with ultrafiltration and subsequent diafiltration for concentration of the extracted oat proteins. A further aim was to study how the deamidation of oat proteins with protein-glutaminase (PG) improves the solubility of proteins as a function of the following parameters: pH (6.0–9.0), enzyme dosage (4–20 U/g protein), and incubation time (1–4 h) with response surface methodology (RSM). Furthermore, we investigated selected functional properties, such as heat-induced gelation and solubility, of the oat protein concentrates. The chosen parameters for the enzymatic deamidation pre-treatment process by PG were as follows: pH 8.0, dosage 11.0 U/g protein, and an incubation time of 4 h (1 h at native pH and 3 h at pH 8.0). Two oat protein concentrates were produced, non-deamidated and ultrafiltered, and deamidated and ultrafiltered, with protein concentrations of 45.0 and 52.4%, respectively. The solubility of both oat protein concentrates was significantly improved at neutral and slightly alkaline pH compared to the solubility of proteins extracted from the starting material. Additionally, both oat protein concentrates produced equally strong heat-induced gel-like structures at a protein concentration of 10%.

Tailoring the properties of double-crosslinked emulsion gels using structural design principles: Physical characteristics, stability, and delivery of lycopene

Lycopene is claimed to have numerous physiological benefits, but its poor water solubility, chemical instability, and low bioavailability limit its application in functional foods and health care products. In this study, lycopene-loaded emulsions containing oil droplets with different interfacial structures were prepared and then cross-linked using transglutaminase (TG) and/or calcium ions (Ca²⁺) to form emulsion gels. The oil droplets were first coated by interfacial layers comprised of whey protein isolate (WPI) and sodium alginate (SA). During emulsion preparation, the SA was added either before or after homogenization to create complex or layer-by-layer coatings, respectively. Subsequently, TG and Ca²⁺ were used to cross-link WPI and SA to form emulsion gels. The results show that double-crosslinking increased the gel strength and viscosity of the emulsion gels. The layer-by-layer emulsion gels were stronger and more viscous than the complex ones. The photochemical and gastrointestinal stability of lycopene encapsulated within the emulsion gels was higher than that of free lycopene. An MTT toxicity test showed that the emulsion gels exhibited no cytotoxicity to Caco-2 cells. The lycopene-loaded emulsion gels exhibited stronger anti-inflammatory activity on the Caco-2 cells than the control. In addition, the absorption of lycopene by the Caco-2 cells increased after encapsulation. This study provides a new approach of preparing edible soft materials to enhance the application of hydrophobic bioactives (like lycopene) in functional foods.

Effect of ultrasound assisted konjac glucomannan treatment on properties of chicken plasma protein gelation

The effect of ultrasound assisted konjac glucomannan treatment on the properties of chicken plasma protein gelation was investigated in this study. There were four gelation groups as follows: untreated plasma protein gelation (Control), gelation added konjac glucomannan (KGG), gelation by ultrasound treatment alone (UG) and gelation added konjac glucomannan combined with ultrasound treatment (KGUG). The data showed that the gelation strength and water-holding capacity of the treated groups were significantly increased compared with those of Control. The strongest bonding water was present in KGUG, followed by KGG and UG in low-field nuclear magnetic resonance. The storage energy (G') and loss energy modulus (G″) of KGUG showed the largest rheological properties, and the G' value was higher than that of G″. Furthermore, the elastic and gelatinous properties of UG, KGG and KGUG played a dominant role in viscoelasticity. After konjac glucomannan addition, the particle size of KGG increased significantly. Compared with that of the Control and KGG, the average particle size of UG and KGUG decreased significantly after ultrasound treatment. The hydrophobicity and disulfide bonds mainly affected the formation of heat-induced gelation in these four groups. Furthermore, KGUG with the highest hydrophobicity and disulfide bonds revealed the best stability. Therefore, the gelation of chicken plasma protein by ultrasound assisted konjac glucomannan treatment had excellent gelling properties.

Plant Proteins for Future Foods: A Roadmap

Protein calories consumed by people all over the world approximate 15-20% of their energy intake. This makes protein a major nutritional imperative. Today, we are facing an unprecedented challenge to produce and distribute adequate protein to feed over nine billion people by 2050, in an environmentally sustainable and affordable way. Plant-based proteins present a promising solution to our nutritional needs due to their long history of crop use and cultivation, lower cost of production, and easy access in many parts of the world. However, plant proteins have comparatively poor functionality, defined as poor solubility, foaming, emulsifying, and gelling properties, limiting their use in food products. Relative to animal proteins, including dairy products, plant protein technology is still in its infancy. To bridge this gap, advances in plant protein ingredient development and the knowledge to construct plant-based foods are sorely needed. This review focuses on some salient features in the science and technology of plant proteins, providing the current state of the art and highlighting new research directions. It focuses on how manipulating plant protein structures during protein extraction, fractionation, and modification can considerably enhance protein functionality. To create novel plant-based foods, important considerations such as protein-polysaccharide interactions, the inclusion of plant protein-generated flavors, and some novel techniques to structure plant proteins are discussed. Finally, the attention to nutrition as a compass to navigate the plant protein roadmap is also considered.

Astaxanthin-loaded emulsion gels stabilized by Maillard reaction products of whey protein and flaxseed gum: Physicochemical characterization and in vitro digestibility

In order to evaluate the effect of ultrasound and Maillard reaction on the physicochemical properties and gastrointestinal fate of astaxanthin-loaded emulsion gels, the Maillard reaction products (MRPs) of whey protein and flaxseed gum (FG) were prepared by traditional or ultrasonic assisted wet-heating. The MRPs obtained by ultrasonic assisted wet-heating had higher grafting degree and more expanded structures evidenced by the browning intensity, fluorescence intensity and circular dichroism (CD) analysis, thus enhancing its functional properties like solubility and emulsifying capacity. The MRPs improved the water holding capacity, encapsulation efficiency, stability of emulsion gels, in which astaxanthin was wrapped as a model bioactive compound. During the simulated digestion process, the bioaccessibility of loaded astaxanthin reached 72.08% for the emulsion gels stabilized by MRPs. The results highlighted the potential of MRPs in improving functionality of protein and as a delivery carrier of bioactive compounds in food industry.

Preparation of Pickering emulsion gels based on κ-carrageenan and covalent crosslinking with EDC: Gelation mechanism and bioaccessibility of curcumin

Pickering emulsions stabilized by zein/carboxymethyl dextrin nanoparticles were added to the κ-carrageenan-based gel matrix to prepare emulsion gels via EDC - induced covalent crosslinking. Texture, WHC and freeze-thaw stability of the emulsion gels increased after crosslinking. The Confocal laser scanning microscope and SEM suggested that droplet clusters could be observed in gel with higher concentration of emulsion. The rheological measurements indicated that the viscosity and gel-like structure were relied on crosslinking agent and emulsion concentration. The photothermal stability of curcumin was significantly enhanced after crosslinking. In addition, in vitro digestion study suggested that the bioaccessibility of curcumin in emulsion gel crosslinked was lower compared to emulsion gel without crosslinking agent. These studies might facilitate the preparation of emulsion gels with excellent stability for bioactive compounds delivery in food and pharmaceutical applications.

Relationship between gel properties and water holding of ovalbumin-carboxymethylcellulose electrostatic complex hydrogels

The relationship between the water holding (WH) and gel properties of protein-based hydrogels is important for designing and regulating the texture and sensory properties of foods. Herein, the relation among WH and heat-set gel properties of ovalbumin (OVA)-carboxymethylcellulose (CMC) electrostatic complexes was explored. The results showed that the gels exhibited homogeneous and dense structure and good WH compared with pure OVA at pH 4.6, while Young's modulus decreased significantly (P < 0.05). This was closely related to the inhibition of the electrostatic interaction on the formation of large protein aggregates during heat treatment (90 °C, 30 min). Specially, the CMC1.2 (the degree of substitution was 1.2) with higher charge density showed stronger interference than CMC0.7 (the degree of substitution was 0.7) for the gel network structure and properties. Moreover, the addition of salt ions could enhance the gel strength. Meanwhile, the coarseness and microstructure pore size were also increased with enhancing of ionic strength, resulting in a significant decrease in the WH. The effective permeability coefficient (k₁) and water flux coefficient (k₂) of gels have a significant positive correlation with their network pore size, indicated that the regulation of WH of hydrogel mainly depended on controlling the pore size of its microstructure.

Effect of charge density of polysaccharide on self-assembly behaviors of ovalbumin and sodium alginate

Similarities and differences of assembly for ovalbumin (OVA) and two kinds of sodium alginate (SA1 and SA2) varying in charge densities (λ_SA1: λ_SA2 ≈ 2:1) were investigated. The assembly processes of OVA/SA mixtures were characterized by phase diagram, particle size, and microstructure. Two differences between OVA/SA1 and OVA/SA2 mixtures in the phase diagram were distinctly observed. First, due to the higher charge density of SA1, the strong interaction between OVA and SA1 caused only pH_φ1 to be recorded. A higher linear charge density of SA1 narrowed the pH_φ1-pH_φ2 range at ratios of 2:1 and 1:1. Second, OVA/SA1 complexes formed a coacervate with a relatively strong resistance to ion-induced shielding effects. This maintained the smaller size (tighter structure) with a larger number of complexes in the coacervate without 250 mM NaCl. The regulating polysaccharides with different charge densities could control the soluble region of complexes and endow various size or morphology of the coacervate assembled by proteins and polysaccharides.

Effect of autoclaving on the mechanical properties and structure of the giant squid hydrolysate-polysaccharide gel

Fish hydrolysates are an attractive option for preparing composite gel foods. However, not much is known regarding their gel properties. Here, we investigated the effect of the autoclaving treatment (121°C, 10 min) on the microstructure and properties of the giant squid hydrolysate-konjac glucomannan-κ-carrageenan-locust bean gum gel (GSH-P gel). The nuclear magnetic resonance proton spin-spin relaxation time (T₂ ) measurements indicated that autoclaving led to stronger water-binding ability of the GSH-P gel. The rheological measurements indicated that autoclaving led to significantly higher viscoelastic modulus and gel strength. The results of confocal laser scanning microscopy and small-angle X-ray scattering indicated that the phase separation of polysaccharides and proteins/peptides was enhanced by autoclaving, and the polysaccharides swelled better, resulting in less, but ordered, network structures. Autoclaving had a similar, but insignificant, positive effect on the polysaccharide (P) gel. Thus, GSH seems to play an important role in the process of polysaccharide gelation. This study shows that autoclaving can alter the structure and improve the properties of the GSH-P gel.

Review on plant protein-polysaccharide complex coacervation, and the functionality and applicability of formed complexes

Controlling the interactions between plant proteins and polysaccharides can lead to the development of novel electrostatic complexed structures that can give unique functionality. This in turn can broaden the diversity of applications that they may be suitable for. Overwhelmingly in the literature, work and reviews relating to coacervation have involved the use of animal proteins. However, with the increasing demand for plant-based protein alternatives by industry and consumers, a greater understanding of how they interact with polysaccharides is essential to control structure, functionality and applicability. This review discusses the factors governing the nature of protein-polysaccharide interactions, their functional attributes and industrial applications, with special attention given to plant proteins. © 2018 Society of Chemical Industry.

Interactions between soluble dietary fibers and wheat gluten in dough studied by confocal laser scanning microscopy

Four soluble dietary fiber (SDF) fractions characterized by major components of AXs, relatively narrow molecular weight distribution, different substituted ratio, and structure-sensitive parameter (ρ) were prepared from wheat bran. The fractions were added to wheat dough to determine the interactions between the dough's network and the SDF fractions relative to their physicochemical characteristics. Furthermore, a comprehensive study focusing on the dough texture characteristic, tensile properties, thermodynamic stability, and the microstructure was conducted by performing texture profile analysis (TPA), differential scanning calorimetry (DSC), and confocal laser scanning microscopy (CLSM) experiments. Additionally, an estimation function of the interactions parameters between the dough's network and the SDF fractions related to the factor molecular weight and ρ of the SDFs was established. The results indicated that the SDF fractions exhibiting a medium molecular weight, and a higher substitution degree and di-substituted ratio, were the most suitable fortifier providing benefits to the dough's qualities. Furthermore, the research methodology might support the high potential of SDF fractions as fortifier for flour-based products.

Development of fat-reduced sausages: Influence of binary and ternary combinations of carrageenan, inulin, and bovine plasma proteins

The aim of this work was to study the influence of the binary and ternary combinations of bovine plasma proteins (BPP), inulin (I) and κ-carrageenan (C) in the overall quality of fat-reduced sausages. The influence of these components over different properties (chemical composition, weight loss after cooking, emulsion stability, texture profile and sensory analysis of fat-reduced sausages) was studied and compared against two samples, one without fat reduction and another a fat-reduced sample without addition of texturing agents. In this sense, a full factorial experimental design of two levels with central point was used. The samples containing BPP+I and BPP+C showed a synergy in which the binary combinations presented higher values of moisture and protein content than the samples containing the individual components. The reduction of fat content increases the values of hardness and decreases the values of springiness. Samples with 5% BPP (w/w) and binary combinations of BPP+C and BPP+I had the best stability values (low total fluid loss), demonstrating a significant synergistic effect by combining BPP+C. Similar results were obtained from the study of weight loss after cooking. However, both studies showed a destabilization of the sample BPP+I+C as emulsion stability decreased and weight loss increased after cooking compared to binary combinations ( P < 0.05). Samples with a binary combination of BPP+C and BPP+I do not present a statistically significant difference in the chewiness with respect to a not-fat-reduced commercial sample ( P > 0.05). The less acceptable sample for flavor and texture was the one containing only BPP. However, when BPP combined with I or C, a major acceptability was obtained, demonstrating the synergistic effect of these binary combinations. Therefore, our studies revealed that the binary combinations of BPP with I or C are good alternatives for the development of fat-reduced sausage.