Extraction, purification and characterization of pectin from alternative sources with potential technological applications

Biogenic Waste from Two Varieties of Plantain in Ghana Contain Pectin with Potential Binding Properties in Conventional Tablets

Pharmaceutical formulations have traditionally relied on plants and their derivatives for various APIs and excipients. In Ghana, the widespread utilization of plantains, irrespective of their ripeness, generates significant waste at every stage of processing, posing disposal issues. Fascinatingly, these wastes, often discarded, possess significant economic potential and can be recycled into valuable raw materials or products. Pectin, a polysaccharide that occurs naturally, has seen a surge in interest in recent times. It has found widespread use in the pharmaceutical sector, particularly as a binding agent in tablet formulations. This study aimed to evaluate pectin from two popular plantain varieties, Apem (M) and Apantu (T) at different ripening stages, for pharmaceutical use as a binding agent in immediate-release tablets. The ripening stages selected were the matured-green (G), half-ripe (H), and full-ripe (R). Acid (D) and alkaline (L) mediums of extraction were employed for each ripening stage for both varieties. Wet granulation method was used to prepare the granules using paracetamol as a model drug, and their flow properties were subsequently assessed. Postcompression tests including, hardness, friability, weight uniformity, disintegration, assay, and in vitro dissolution were also assessed. Granules from all formulation batches had good flow properties indicated by their angle of repose (14.93 ± 1.41-21.80 ± 1.41), Hausner ratio (0.96 ± 0.27-1.22 ± 0.02), and compressibility (%) (7.69 ± 0.002-20.51 ± 0.002). All the tablets passed the uniformity of weight with none deviating by ±5%. The hardness of all the formulated tablets ranged between 3.96 ± 0.32 and 13.21 ± 0.36, while the friability for all tablets was below 1%. The drug content was between 100.1 ± 0.23% and 103.4 ± 0.01%. Tablets formulated with pectin as a binding agent at concentrations of 10% w/v and 15% w/v successfully met the disintegration test criteria for immediate release tablets. However, those prepared with a concentration of 20% w/v (MGL, MHD, MHL, MRD, MRL, TGL, THD, THL, and TRL) did not pass the disintegration test. Consequently, all batches of tablets successfully met the dissolution test requirement (Diss, Q > 75%), except for the batches that did not pass the disintegration test (Diss, Q < 75%). Ultimately, pectins extracted from the peels of Apem and Apantu at different ripening stages using acid and alkaline extraction can be commercially exploited as pharmaceutical binders at varying concentrations in immediate-release tablets.

Effects of pectin methyl-esterification on intestinal microbiota and its immunomodulatory properties in naive mice

Pectins are dietary fibers that are attributed with several beneficial immunomodulatory effects. Depending on the degree of esterification (DE), pectins can be classified as high methoxyl pectin (HMP) or low methoxyl pectin (LMP). The aim of this study was to investigate the effects of pectin methyl-esterification on intestinal microbiota and its immunomodulatory properties in naive mice. Supplementation of the diet with LMP or HMP induced changes in the composition of the intestinal microbiota in mice toward Bacteroides, which was mainly promoted by HMP. Metabolome analysis of stool samples from pectin-fed mice showed a different effect of the two types of pectin on the levels of short-chain fatty acids and bile acids, which was consistent with highly efficient in vivo fermentation of LMP. Analysis of serum antibody levels showed a significant increase in IgG and IgA levels by both pectins, while FACS analysis revealed a decrease of infiltrating inflammatory cells in the intestinal lamina propria by HMP. Our study revealed that the structural properties of the investigated pectins determine fermentability, effects on microbial composition, metabolite production, and modulation of immune responses. Consumption of HMP preferentially altered the gut microbiota and suppressed pro-inflammatory immune responses, suggesting a beneficial role in inflammatory diseases.

Effect of structural characteristics on the physicochemical properties and functional activities of dietary fiber: A review of structure-activity relationship

Dietary fibers come from a wide range of sources and have a variety of preparation methods (including extraction and modification). The different structural characteristics of dietary fibers caused by source, extraction and modification methods directly affect their physicochemical properties and functional activities. The relationship between structure and physicochemical properties and functional activities is an indispensable basic theory for realizing the directional transformation of dietary fibers' structure and accurately regulating their specific properties and activities. In this paper, since a brief overview about the structural characteristics of dietary fiber, the effect of structural characteristics on a variety of physicochemical properties (hydration, electrical, thermal, rheological, emulsifying property, and oil holding capacity, cation exchange capacity) and functional activities (hypoglycemic, hypolipidemic, antioxidant, prebiotic and harmful substances-adsorption activity) of dietary fiber explored by researchers in last five years are emphatically reviewed. Moreover, the future perspectives of structure-activity relationship are discussed. This review aims to provide theoretical foundation for the targeted regulation of properties and activities of dietary fiber, so as to improve the quality of their applied products and physiological efficiency, and then to realize high value utilization of dietary fiber resources.

Pectin as a biofunctional food: comprehensive overview of its therapeutic effects and antidiabetic-associated mechanisms

Pectin is a complex polysaccharide found in a variety of fruits and vegetables. It has been shown to have potential antidiabetic activity along with other biological activities, including cholesterol-lowering properties, antioxidant activity, anti-inflammatory and immune-modulatory effects, augmented healing of diabetic foot ulcers and other health benefits. There are several pectin-associated antidiabetic mechanisms, such as the regulation of glucose metabolism, reduction of oxidative stress, increased insulin sensitivity, appetite suppression and modulation of the gut microbiome. Studies have shown that pectin supplementation has antidiabetic effects in different animal models and in vitro. In human studies, pectin has been found to have a positive effect on blood glucose control, particularly in individuals with type 2 diabetes. Pectin also shows synergistic effects by enhancing the potency and efficacy of antidiabetic drugs when taken together. In conclusion, pectin has the potential to be an effective antidiabetic agent. However, further research is needed to fully understand its detailed molecular mechanisms in various animal models, functional food formulations and safety profiles for the treatment and management of diabetes and associated complications in humans. The current study was carried out to provide the critical approach towards therapeutical potential, anti-diabetic potential and underlying molecular mechanisms on the basis of existing knowledge.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

Enhanced dye sequestration with natural polysaccharides-based hydrogels: A review

Due to the expansion of industrial activities, the concentration of dyes in water has been increasing. The dire need to remove these pollutants from water has been heavily discussed. This study focuses on the reproducible and sustainable solution for wastewater treatment and dye annihilation challenges. Adsorption has been rated the most practical way of the several decolorization procedures due to its minimal initial investment, convenient utility, and high-performance caliber. Hydrogels, which are three-dimensional polymer networks, are notable because of their potential to regenerate, biodegrade, absorb bulky amounts of water, respond to stimuli, and have unique morphologies. Natural polysaccharide hydrogels are chosen over synthetic ones because they are robust, bioresorbable, non-toxic, and cheaply accessible. This study has covered six biopolymers, including chitosan, cellulose, pectin, sodium alginate, guar gum, and starch, consisting of their chemical architecture, origins, characteristics, and uses. The next part describes these polysaccharide-based hydrogels, including their manufacturing techniques, chemical alterations, and adsorption effectiveness. It is deeply evaluated how size and shape affect the adsorption rate, which has not been addressed in any prior research. To assist the readers in identifying areas for further research in this subject, limitations of these hydrogels and future views are provided in the conclusion.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.20%), galacturonic acid content (91.19 g/100 g), degree of methylation and acetylation (66.93 and 23.87%), and molecular weight (3.89 × 105 g/mol) were obtained when sugar beet flakes were pretreated by hot-air drying, and the extraction was made with citric acid using plant material with particle sizes of 125-200 μm. This pectin also had high emulsion activity (51.42%) and emulsion stability (88.03%). The FT-IR spectra were similar, while pectin thermal behavior was affected by the drying pretreatment and extraction conditions. The results of this study showed that from this by-product of the sugar industry it can be extracted high quality pectin with rheological and emulsifying properties that are superior to commercial citrus and apple pectin.

Properties of lime peel pectin as mainly influenced by ethanol and protein-based purification methods

BACKGROUND

Lime peel, obtained from juice factory waste, is considered as a source of pectin. Lime peel pectin samples, extracted by three extraction procedures of 90 °C heating for 120 min, 90 °C heating for 90 min and then 32 min of ultrasound, and 80 °C heating for 60 min and then 22 min of ultrasound, and purified by two methods using ethanol and sodium caseinate (SC), were prepared and characterized.

RESULTS

The results showed that the purification method significantly affected the lime pectin samples properties. Pectin samples purified with SC had a transparent and film-like appearance, whereas the ethanol-purified pectin samples showed an amorphous and opaque appearance. Pectin samples purified with ethanol showed higher extraction recovery (approximately 20%), whereas the lowest pectin yield was observed for the purification with SC (approximately 10%). Although SC purification did not enhance the pectin yield, it diminished the level of 'non-pectin' components and resulted in purer pectin. The bands at 1045-1076 cm-1 , relating to neutral sugars, had higher intensities in ethanol-purified pectin samples, indicating their higher sugar contents. Also the samples purified with SC exhibited more thermal stability, probably as a result of the presence of protein in their structure.

CONCLUSION

In the present study, under the same or varying extraction conditions, the most important element distinguishing pectins in terms of appearance, physicochemical, thermal and Fourier transform infrared characteristics was the type of purification method. Purification with SC may result in pectins with more non-esterified galacturonic acids from the homogalacturonan fraction. © 2023 Society of Chemical Industry.

Green Extraction of Pectin from Sugar Beet Flakes and Its Application in Hydrogels and Cryogels

Sugar beet flakes, a by-product of the sugar industry, were used as a source for pectin extraction that was performed using conventional citric acid extraction (CE) and two non-conventional extraction techniques-microwave-assisted extraction (MAE) and pulsed ultrasound-assisted extraction (PUAE). The influence of extraction conditions was studied for each technique based on pectin yield and galacturonic acid content, and spectroscopic, chromatographic and colorimetric methods were used for pectin characterization. Better results for pectin yield were achieved through CE (20.80%), while higher galacturonic acid content was measured in pectin extracted using PUAE (88.53 g/100 g). Pectin extracted using PUAE also presented a higher degree of methylation and acetylation. A significant increase in the molecular weight of pectin was observed for the PUAE process (7.40 × 105 g/mol) by comparison with conventional extraction (1.18 × 105 g/mol). Hydrogels and cryogels prepared with pectin from sugar beet flakes also showed differences in physicochemical parameters determined by the method of pectin extraction. Hydrogels had higher bulk density values irrespective of the pectin extraction method, and overall lower values of the textural parameters. Cryogels prepared with pectin from CE showed higher values of the textural parameters of hardness, adhesiveness, cohesiveness, gumminess and chewiness, while gels obtained with pectin from MAE and PUAE had higher thermal stability. The results of this study prove that sugar beet flakes can be considered a potential source for pectin production, and the extracted pectin is suitable for obtaining hydrogels and cryogels with physicochemical parameters comparable to the commercial citrus and apple pectin available on the market.

Development and characterization of films from Campomanesia xanthocarpa and commercial citrus pectins with different degrees of methyl-esterification

In this study, pectins from commercial citrus and isolated from gabiroba (Campomanesia xanthocarpa) fruits, were obtained with different degrees of methyl-esterification (DM) and applied in the films. The DM ranged from 0 % to 62.5 % and the gradual de-esterification process was confirmed by mono-dimensional analysis (1H NMR). In order to investigate the influence of DM values in pectin film properties, PCP (DM: 62.5 %); PCP-5 (DM: 37.4 %); PCP-15 (DM: 19.1 %), and a fully de-esterified sample PCP-35 (DM: 0 %) were selected. The functional properties of the films clearly showed that the DM and cross-linking process are necessary to obtain a material with water resistance. Furthermore, pectin isolated from the fruits of gabiroba was purified (GW-Na, DM: 51.9 %) and partially de-esterified (GW-Na-5, DM: 37.1 %). These pectins were used, for the first time, in development of films and the physical and mechanical properties were compared with films made with PCP and PCP-5 samples. GW-Na and GW-Na-5 films presented suitable properties, with reduced solubility reduced (57.1 and 26.2 %), high degree of swelling (2.14 and 2.26), low flexibility (18.05 and 6.11 MPa), respectively. High strength and rigidity (99.36 and 1040.9 MPa), for both films (GW-Na and GW-Na-5) were demonstrated, similar to that obtained by analyzed citrus pectin.

Physicochemical, structural, and functional characterization of pectin extracted from quince and pomegranate peel: A comparative study

Pectin's physicochemical, structural, and functional characteristics vary widely depending on the source of extraction. In this study, pectins were extracted from seedless quince and pomegranate peel, and their physicochemical, structural, and functional properties were investigated. A Box-Behnken Design with three factors and three levels was applied to optimize the pectin extraction yield from each matrix. As a result, the best extraction yields for quince pectin (QP) and pomegranate peel pectin (PPP) were 11.44 and 12.08 % (w/w), respectively. Both extracted pectins exhibit a linear structure, with the homogalacturonan domain dominating the rhamnogalacturonan I. Both pectins are highly methyl-esterified (DM > 69 %) with a higher degree of acetylation for PPP than QP, with 12 and 8 %, respectively. Unlike QP, PPP has a narrow, homogenous distribution and greater molecular weight (120 kDa). Regarding functionality, 1 g of QP could retain 4.92 g of water, and both pectin emulsions were more stable at room temperature than at 4 °C. When the concentration of QP is increased, rheological measurements demonstrate that it exhibits pseudoplastic behavior. Finally, QP can be used as a thickener, whereas PPP can be utilized as starting material for chemical changes to create multifunctional pectins.

Characterization of a low-methoxyl pectin extracted from red radish (Raphanus sativus L.) pomace and its gelation induced by NaCl

There is an increasing demand for obtaining pectin from new sources. Red radish (Raphanus sativus L.) pomace pectin extracted by alkali was low-methoxyl pectin with esterification degree of 10.17 %, galacturonic acid content of 69.71 % (wt), and average molar weight of 78.59 kDa. The pectin primarily consisted of rhamnogalacturonan I and homogalacturonan domains. The predominant monosaccharides of the pectin were galacturonic acid (46.32 mol%), arabinose (16.03 mol%), galactose (10.46 mol%), and rhamnose (10.28 mol%), respectively. The red radish pomace pectin solution exhibited a shear-thinning behavior. NaCl could induce gelation of red radish pomace pectin, and the gel properties of red radish pomace pectin were considerably affected by the NaCl concentration. As the NaCl concentration (0.25-0.50 mol/L) increased, the rate of gelation accelerated, and the time to gelation point appeared earlier. There was an optimal NaCl concentration (0.50 mol/L) for the pectin to form a gel with the greatest solid-like properties, gel hardness (33.84 g) and water-holding capacity (62.41 %). Gelation force analysis indicated gel formation mainly caused by electrostatic shielding effect of Na+ and hydrogen bonding. This research could facilitate the applications of the red radish pomace pectin in the realm of edible hydrocolloids.

Polyphenol-Enriched Pectin from Pomegranate Peel: Multi-Objective Optimization of the Eco-Friendly Extraction Process

A multi-objective optimization was performed using response surface methodology to obtain a high-value-added product, pectin enriched in polyphenols, from pomegranate peel. For this purpose, a green extraction technique that combines citric acid and ultrasound was carried out considering three variables: time, pH, and temperature. The extraction procedure was optimized using the Box-Behnken design, these being the most suitable conditions, with an extraction time of 34.16 min, a pH of 2.2, and a temperature of 89.87 °C. At this point, the pectin yield was 31.89%, with a total retained polyphenol content of 15.84 mg GAE/g pectin. In addition, the water activity, ash content, equivalent weight, methoxyl content, and degree of esterification were determined for the pectin obtained at the optimal point. This study demonstrates that polyphenol-enriched pectin can be obtained from pomegranate peel via an eco-friendly and efficient method, and that it presents similar properties to commercial pectin, preserving its quality and with potential use as an ingredient or food supplement with a high nutritional value. This work contributes to developing sustainable strategies to valorize pomegranate agro-industrial waste and produce high-value functional ingredients.

Comparisons of pulsed ultrasound-assisted and hot-acid extraction methods for pectin extraction under dual acid mixtures from onion (Allium cepa L.) waste

The aim of this study is to compare the physicochemical properties and yields of pectins extracted from onion waste under hot acid (HAE) and pulsed ultrasound-assisted extraction (PUAE) methods using different organic-inorganic acids, their mixtures, and pure water. The extraction temperature for experiments carried out under HAE was kept at 90°C for 90 min, whereas PUAE experiments were accomplished at RT in 15 min. In general, HAE gave better pectin yields compared with PUAE due to the significance of the increasing extraction temperature for the release of pectin from the plant matrix. While the maximum pectin yield from onion waste was 16.22% for HAE, the highest yield for PUAE was 9.83%. PUAE provides less time- and energy-consuming extraction of pectin within 15 min and thus seems to be more economic compared with the HAE. According to the physicochemical properties (equivalent weight (EW), degree of esterification (DE), methoxyl (MeO), and galacturonic acid (Gal-A) contents) of obtained pectins, extracted pectins were mostly high methoxy pectin. While the DE and MeO values of pectins extracted in organic acid conditions under HAE were higher, these values were found to be higher for pectins extracted in inorganic acids under PUAE. For acid mixtures, the DE and MeO values of pectins under HAE were mostly found to be lower than those under PUAE. Sequential PUAE and HAE methods for the extraction of pectin from onion waste were also found to be useful in terms of obtaining higher yields and better physicochemical properties. The highest pectin yield was 20.32% for the sequential PUAE and HAE methods. FT-IR analyses of the extracted pectins by both HAE and PUAE methods showed similar vibration bands compared with those of commercial citrus pectin.

Extraction of pectin from watermelon and pomegranate peels with different methods and its application in ice cream as an emulsifier

Pectin extraction from watermelon peel (WP) and pomegranate peel (PP) was carried out using three different extraction methods: classical solvent extraction (CSE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). Extraction parameters (pH, temperature, time, and speed/amplitude/power) were optimized to target maximum crude pectin yield (CPY), while the sample-to-solvent ratio (SS) was determined to be fixed at 1:10 w/v at all experiments. CPY was increased by low pH, high temperature, and long time. The pectins obtained at optimum conditions were characterized regarding the physicochemical and rheological properties, and the pectin solutions were found to be typical pseudoplastic fluids. WP pectin extracted with MAE and PP pectin extracted with UAE were determined to have the best emulsifying properties and added to the ice cream formulations. MAE had the maximum CPY of 9.40% for WP (pH = 1.3, 6 min, 596 W) and the best emulsifying properties. UAE had the best emulsifying properties for PP and the CPY was 11.56% in conditions of pH = 1.5, a temperature of 69°C, an extraction time of 29 min, and a 32% amplitude. The use of PP pectin resulted in a significant increase in the apparent viscosity of ice cream mix and also the first dripping time and the hardness of ice cream over commercial emulsifier. Melting properties and hardness values of ice cream with WP pectin were comparatively closer to those of ice cream with commercial emulsifier. On the other hand, the first dripping time and hardness value of ice cream with PP pectin having 60.25 min and 3.84 N, respectively, were higher than those of commercial ice cream having 53.75 min and 2.14 N, respectively. Practical Application: The utilization of WP and PP, which are good sources for pectin production, benefits both a sustainable environment and a sustainable food industry. Pectin extracted from WP and PP as an emulsifier in ice cream can ensure the production of ice creams with good melting properties. Pectin can be used as a healthy, sustainable, and economical alternative emulsifier in the ice cream industry.

Characterization and Applications of the Pectin Extracted from the Peel of Passiflora tripartita var. mollissima

The inadequate management of organic waste and excessive use of plastic containers cause damage to the environment; therefore, different studies have been carried out to obtain new biomaterials from agricultural subproducts. The objective of this work was to evaluate the feasibility of using the pectin extracted from the peel of Passiflora tripartita var. mollissima (PT), characterizing its type and viability for the production of edible biodegradable films. In addition, films of two thicknesses (23.45 ± 3.02 µm and 53.34 ± 2.28 µm) were prepared. The results indicated that PT is an excellent raw material for the extraction of pectin, with high yields (23.02 ± 0.02%), high galacturonic acid content (65.43 ± 2.241%), neutral sugars (ribose, xylose, glucose) and a high degree of esterification (76.93 ± 1.65%), classifying it as a high-methoxy pectin. Regarding the films, they were malleable and flexible, with a water vapor permeability from 2.57 × 10-10 ± 0.046 to 0.13 × 10-10 ± 0.029 g/s mPa according to thickness, being similar to other Passiflora varieties of edible films. The pectin extraction yield from PT makes this fruit a promising material for pectin production and its chemical composition a valuable additive for the food and pharmaceutical industries.

Non-Digestible Carbohydrates: Green Extraction from Food By-Products and Assessment of Their Effect on Microbiota Modulation

The nature and composition of the waste produced by food industrial processing make its abundance and accumulation an environmental problem. Since these by-products may present a high potential for revalorization and may be used to obtain added-value compounds, the main goals of the technological advancements have been targeted at reducing the environmental impact and benefiting from the retrieval of active compounds with technological and health properties. Among the added-value substances, nondigestible carbohydrates have demonstrated promise. In addition to their well-known technological properties, they have been discovered to modify the gut microbiota and enhance immune function, including the stimulation of immune cells and the control of inflammatory reactions. Furthermore, the combination of these compounds with other substances such us phenols could improve their biological effect on different noncommunicable diseases through microbiota modulation. In order to gain insight into the implementation of this combined strategy, a broader focus concerning different aspects is needed. This review is focused on the optimized green and advanced extraction system applied to obtain added-value nondigestible carbohydrates, the combined administration with phenols and their beneficial effects on microbiota modulation intended for health and/or illness prevention, with particular emphasis on noncommunicable diseases. The isolation of nondigestible carbohydrates from by-products as well as in combination with other bioactive substances could provide an affordable and sustainable source of immunomodulatory chemicals.

Evaluation of physicochemical, antioxidant, antibacterial activity, and sensory properties of watermelon rind candy

Watermelon (Citrullus lanatus) is consumed all over the world that contains a large number of seeds and rind, which is discarded. These by-products contain phytochemical compounds with great nutritional potential. This study aims to evaluate physicochemical properties and sensory values of watermelon rind candy. In this study in order to make the waste of watermelon a more sustainable and value-added food product, the watermelon rind was dried using an osmotic dehydration technique which comprises gradual impregnation of syrup (50 and 70% w/w - 1 to 5 h) before drying at 40 and 60 °C in 8 and 10 h. Various variables such as moisture content, chemical composition, water loss, solid gain, rehydration water, acidity, pH, antioxidant activity, antibacterial activity, residual toxins, phenolic and flavonoid contents during osmotic dehydration of watermelon were investigated. Results showed by rising temperatures, dehydration becomes more severe. Increasing the temperature in both osmotic samples in a concentrated solution (70%) and in osmotic samples with a dilute solution (50%) can enhance the mass transfer, water loss, solid absorption, as well as dehydration intensity. However, antioxidant activity, phenolic and flavonoid content significantly decreased after osmotic dehydration. TPC decreased from 35.83 mg/100 g to 27.45 mg/100 g and TFC of the watermelon rind (8.71 ± 0.01 mg/100 g) decreased to 2.63 ± 0.02 mg/100 g and also antioxidant activity after the osmotic process decreased from 61% to 40%. Also, osmotic dehydration had no significant impact on acidity and pH. The watermelon rind dehydrated sample (osmosis temperature: 40 °C, osmotic solution concentration: 70%, immersion duration: 5 h) was the best choice of panelists due to the highest score in the sensory evaluation including taste, texture, and overall acceptability. By determining the hardness of the watermelon rind candy and comparing it with the results of texture analysis of other dried products, it can be concluded that this product can be used as a healthy snack with longer shelf life properties.

Valorization of polyphenolic compounds from food industry by-products for application in polysaccharide-based nanoparticles

In the last decades, evidence has indicated the beneficial properties of dietary polyphenols. In vitro and in vivo studies support that the regular intake of these compounds may be a strategy to reduce the risks of some chronic non-communicable diseases. Despite their beneficial properties, they are poorly bioavailable compounds. Thus, the main objective of this review is to explore how nanotechnology improves human health while reducing environmental impacts with the sustainable use of vegetable residues, from extraction to the development of functional foods and supplements. This extensive literature review discusses different studies based on the application of nanotechnology to stabilize polyphenolic compounds and maintain their physical-chemical stability. Food industries commonly generate a significant amount of solid waste. Exploring the bioactive compounds of solid waste has been considered a sustainable strategy in line with emerging global sustainability needs. Nanotechnology can be an efficient tool to overcome the challenge of molecular instability, especially using polysaccharides such as pectin as assembling material. Complex polysaccharides are biomaterials that can be extracted from citrus and apple peels (from the juice industries) and constitute promising wall material stabilizing chemically sensitive compounds. Pectin is an excellent biomaterial to form nanostructures, as it has low toxicity, is biocompatible, and is resistant to human enzymes. The potential extraction of polyphenols and polysaccharides from residues and their inclusion in food supplements may be a possible application to reduce environmental impacts and constitutes an approach for effectively including bioactive compounds in the human diet. Extracting polyphenolics from industrial waste and using nanotechnology may be feasible to add value to food by-products, reduce impacts on nature and preserve the properties of these compounds.

Nanoemulsion-Based Multilayer Films for Ground Beef Preservation: Antimicrobial Activity and Physicochemical Properties

This study aimed to improve the physical, mechanical, and biological properties of a monolayer pectin (P) film containing nanoemulsified trans-Cinnamaldehyde (TC) by incorporating it between inner and outer layers of ethylcellulose (EC). The nanoemulsion had an average size of 103.93 nm and a zeta potential of -46 mV. The addition of the nanoemulsion increased the opacity of the film, reduced its moisture absorption capacity, and improved its antimicrobial activity. However, the tensile strength and elongation at break of the pectin films decreased after the incorporation of nanoemulsions. Multilayer films (EC/P/EC) showed a higher resistance to breaking and better extensibility compared to monolayer films. The antimicrobial activity of both mono and multilayer films was effective in inhibiting the growth of foodborne bacteria during storage of ground beef patties at 8 °C for 10 days. This study suggests that biodegradable antimicrobial multilayer packaging films can be effectively designed and applied in the food packaging industry.

Supramolecular structure of banana peel pectin and its transformations during extraction by acidic methods

In this study, the approaches to describe the mesh structure in the homogalacturonate domains of pectin and the effect of the native structure violations on the stabilization effectiveness of the oil-in-water emulsion were demonstrated. Pectin with a native structure was isolated from banana peel by enzymolysis of insoluble dietary fibres. This pectin was compared with pectins, which were isolated using hydrochloric and citric acids. The properties of pectins were analyzed taking into account the ratio of galacturonate units in nonsubstituted, methoxylated and calcium-pectate forms. The content of calcium-pectate units determines the density of inter-molecular crosslinking formation. The simulation results reflect the structure of rigid "egg-box" crosslinking blocks and flexible segments formed in native pectin mainly by methoxylated links. Hydrochloric acid extraction is accompanied by the destruction of the crosslinking blocks and depolymerization of pectin. Citric acid partially demineralizes the crosslinking blocks contributing to the release of macromolecular chains that do not have calcium-pectate units. The granulometric data indicates that the individual macromolecules take the thermodynamically stable form of a statistical tangle. Such conformation is an ideal basis for the formation of "host-guest" microcontainers having a hydrophilic shell and a hydrophobic core with an oil-soluble functional substance.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

The model polysaccharide potato galactan is actually a mixture of different polysaccharides

Commercially-supplied potato galactan (PG) is widely used as a model polysaccharide in various bioactivity studies. However, results using this galactan are not always consistent with the stated composition. Here, we assessed its composition by fractionating this commercial PG and purified its primary components: PG-A, PG-B and PG-Cp with weight-averaged molecular weights of 430, 93, and 11.3 kDa, respectively. PG-Cp consists of free β-1,4-galactan chains, whereas PG-A and PG-B are type I rhamnogalacturonans with long β-1,4-galactan side chains of up to 80 Gal residues and short β-1,4-galactan side chains of 0 to 3 Gal residues that display a "trees in lawn" pattern. Structures of these polysaccharides correlate well with their activities in terms of galectin-3 binding and gut bacterial growth assays. Our study clarifies the confusion related to commercial PG, with purified fractions serving as better model polysaccharides in bioactivity investigations.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Recent progress in pectin extraction and their applications in developing films and coatings for sustainable food packaging: A review

Perishable foods like fruits and vegetables, meat, fish, and dairy products have short shelf-life that causes significant postharvest losses, which poses a major challenge for food supply chains. Biopolymers have been extensively studied as sustainable alternatives to synthetic plastics, and pectin is one such biopolymer that has been used for packaging and preservation of foods. Pectin is obtained from abundantly available low-cost sources such as agricultural or food processing wastes and by products. This review is a complete account of pectin extraction from agro-wastes, development of pectin-based composite films and coatings, their characterizations, and their applications in food packaging and preservation. Compared to conventional chemical extraction, supercritical water, ultrasound, and microwave assisted extractions are a few examples of modern and more efficient pectin extraction processes that generate almost no hazardous effluents, and thus, such extraction techniques are more environment friendly. Pectin-based films and coatings can be functionalized with natural active agents such as essential oils and other phytochemicals to improve their moisture barrier, antimicrobial and antioxidant properties. Application of pectin-based active films and coatings effectively improved shelf-life of fresh cut-fruits, vegetables, meat, fish, poultry, milk, and other food perishable products.

Sustainable Biodegradable Biopolymer-Based Nanoparticles for Healthcare Applications

Biopolymeric nanoparticles are gaining importance as nanocarriers for various biomedical applications, enabling long-term and controlled release at the target site. Since they are promising delivery systems for various therapeutic agents and offer advantageous properties such as biodegradability, biocompatibility, non-toxicity, and stability compared to various toxic metal nanoparticles, we decided to provide an overview on this topic. Therefore, the review focuses on the use of biopolymeric nanoparticles of animal, plant, algal, fungal, and bacterial origin as a sustainable material for potential use as drug delivery systems. A particular focus is on the encapsulation of many different therapeutic agents categorized as bioactive compounds, drugs, antibiotics, and other antimicrobial agents, extracts, and essential oils into protein- and polysaccharide-based nanocarriers. These show promising benefits for human health, especially for successful antimicrobial and anticancer activity. The review article, divided into protein-based and polysaccharide-based biopolymeric nanoparticles and further according to the origin of the biopolymer, enables the reader to select the appropriate biopolymeric nanoparticles more easily for the incorporation of the desired component. The latest research results from the last five years in the field of the successful production of biopolymeric nanoparticles loaded with various therapeutic agents for healthcare applications are included in this review.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

Fabrication and characterization of gelatin-EGCG-pectin ternary complex: formation mechanism, emulsion stability, and structure

BACKGROUND

Protein-polyphenol-polysaccharide ternary complex particles have better emulsion interfacial stability compared to protein-polysaccharide binary complexes. However, knowledge is scarce when it comes to the fabrication of protein-polyphenol-polysaccharide ternary complexes as interfacial stabilizers and the interactions between the three substances. In the present work, ternary complexes were prepared using gelatin, high methoxyl pectin, and epigallocatechin gallate (EGCG) as raw materials. The effect of different influencing factors on the formation process of ternary complexes was investigated by varying different parameters. physicochemical stability, emulsifying properties, and structural characteristics were analyzed.

RESULTS

The ternary complex had a smaller particle size (275 nm) and polydispersity index (0.112) when the mass concentration ratio of gelatin to high methoxyl pectin was 9:1, addition of EGCG was 0.05%, pH value was 3.0, and ionic strength was 10 mmol L^-1 . Meanwhile, the complex had the highest emulsifying stability index (691.75 min) and emulsifying activity index (22.96 m²  g^-1 ). Scanning electron microscopical observation demonstrated that the addition of EGCG promoted the dispersion of ternary complex more uniformly, and effectively reduced the agglomeration phenomenon. The discrepancy in fluorescence intensity suggested that interactions between EGCG and gelatin occurred, which altered the protein spatial conformation of gelatin. Fourier transform infrared spectroscopic analysis elucidated that hydrogen bond interaction was the primary non-covalent interaction between EGCG and gelatin-high methoxyl pectin binary complex.

CONCLUSION

The aforementioned results purposed to provide some theoretical reference and basis for the rational design of stable protein-polyphenol-polysaccharide ternary complexes. © 2022 Society of Chemical Industry.

Magnetic Nanoparticles for Protein Separation and Purification

Proteins are essential for various functions such as brain activity and muscle contraction in humans. Even though food is a source of proteins, the bioavailability of proteins in most foods is usually limited due to matrix interaction with other biomolecules. Thus, it is essential to extract these proteins and provide them as a nutraceutical supplement to maintain protein levels and avoid protein deficiency. Hence, protein purification and extraction from natural sources are highly significant in biomedical applications. Chromatography, crude mechanical disruption, use of extractive chemicals, and electrophoresis are some of the methods applied to isolate specific proteins. Even though these methods possess several advantages, they are unable to extract specific proteins with high purity. A suitable alternative is the use of nanoparticles, which can be beneficial in protein purification and extraction. Notably, magnetic iron and iron-based nanoparticles have been employed in protein extraction processes and can be reused via demagnetization due to their magnetic property, smaller size, morphology, high surface-to-volume ratio, and surface charge-mediated property. This chapter is a summary of various magnetic nanoparticles (MNPs) that can be used for the biomolecular separation of proteins.

Pectin in Metabolic Liver Disease

Alterations in the composition of the gut microbiota (dysbiosis) are observed in nutritional liver diseases, including non-alcoholic fatty liver disease (NAFLD) and alcoholic liver disease (ALD) and have been shown to be associated with the severity of both. Editing the composition of the microbiota by fecal microbiota transfer or by application of probiotics or prebiotics/fiber in rodent models and human proof-of-concept trials of NAFLD and ALD have demonstrated its possible contribution to reducing the progression of liver damage. In this review, we address the role of a soluble fiber, pectin, in reducing the development of liver injury in NAFLD and ALD through its impact on gut bacteria.

Jabuticaba (Plinia sp.) Peel as a Source of Pectin: Characterization and Effect of Different Extraction Methods

The peel of jabuticaba, a small fruit native to Brazil, has been shown to be a potential source of antioxidants and soluble dietary fibers. In this study, flours prepared from these peels were evaluated as a source of pectin. Different extraction methods were employed: ultrasound (US) extraction followed by low temperature heating (40 °C); in a microwave (MW) without (method 1) or with cellulase (method 2) or hemicellulase (method 3); or in a water bath (method 4). Pectin yields ranged from approximately 18% for methods 1 and 4 up to 22% for enzyme-assisted extractions (methods 2 and 3). Methods that did not employ enzymes resulted in low amounts of methoxyl pectins, as opposed to high amounts of methoxyl pectins obtained after enzyme treatment. Cyanidin-3-O-glucoside (C3G) and ellagic acid were the main phenolic compounds found in jabuticaba peel pectins, with higher C3G levels obtained with enzyme-free extraction (methods 1 and 4). All pectins from jabuticaba peel presented a reddish tone, good emulsifying properties and high swelling capacity. The pectin extracted using US+MW+cellulase (method 2) presented better emulsifying performance (higher values of emulsifying activity and emulsion stability), more effective than commercially available citrus pectin.

Extraction optimization and characterization of pectin from sesame (Sesamum indicum L.) capsule as a new neglected by-product

BACKGROUND

With production of over 6 million tonnes a year of sesame, its capsules are considered to be an unutilized waste. In this study, extraction of pectin from this novel source was optimized using a green method, and the functional and physiochemical characteristics of the resultant pectin were compared to commercial pectin.

RESULTS

In this study, the sesame capsule pectin (SCP) extraction conditions were optimized to reach maximum yield, and the results showed that the maximum pectin extraction yield (138 g kg^-1 ) was obtained under optimal conditions (microwave power 700 W, irradiation time 5 min, pH 1.5, and liquid-to-solid ratio 41.8 (mL g^-1 ). The results showed that the pectin was low methoxyl type with a galacturonic acid content of 670 g kg^-1 . The extracted pectin had a high molecular weight (341 kDa) and surface charge (34.09 ± 1.88 mV) and exhibited 66% DPPH radical scavenging. The obtained results from ¹ H-nuclear magnetic resonance and Fourier transform infrared spectra validated the presence of pectin structure in the extracted sample.

CONCLUSION

Sesame capsule pectin, when compared to commercial pectin, demonstrated better functional properties in terms of emulsifying properties, oil holding capacity, foaming capacity and antioxidant activity. SCP showed similar properties in comparison to its commercial counterpart, which suggests that it could well be considered as a new and suitable source for pectin extraction. © 2022 Society of Chemical Industry.

Extraction and characterization of a pectin from sea buckthorn peel

Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.

Physicochemical and functional properties of Lycium ruthenicum pectin by different extraction methods

Three different extraction methods were used to extract high-temperature water-extracted pectin (HWp), high-temperature acid-extracted pectin (HAp), and high-temperature alkali-extracted pectin (HALp) from Lycium ruthenicum. The physicochemical properties, structure, and functional properties of three different pectins were studied. The results showed that HWp and HALp can extract rhamnogalacturonan-I (RG-I) from L. ruthenicum better. Through structural feature analysis, HWp and HALp have a branched structure, and HWp has a higher degree of esterification than HAp and HALp. Zeta potential results show that HWp solution is more stable. The thermal analysis results show that the thermal stability is HALp > HAp > HWp. HWp has the highest viscosity. The inhibitory activity results showed that HWp, HAp, and HALp have a certain inhibitory effect on α-glucosidase activity. This study shows the effects of different extraction methods on the properties of L. ruthenicum pectin and aims to provide a theoretical basis for the pharmaceutical and food industries to choose more suitable pectin extraction methods.

Polyelectrolyte Precipitation: A New Green Chemistry Approach to Recover Value-Added Proteins from Different Sources in a Circular Economy Context

Proteins have always been vital biological molecules used for industrial purposes, human nutrition and health. Nowadays, seeking new alternatives and sources of these biomolecules is becoming an increasing research trend derived from the present consumer awareness between food consumption and health promotion, but also on environmental sustainability. Although there are different consolidated/traditional downstream processes to obtain proteins, such as chromatography tools, alkali hydrolysis, precipitation by inorganic salts and organic solvents, their industrial-scale application still demands urgent innovation due to the poor recovery yields, high costs and time-consuming steps, environmental impact as well as some toxic concerns. Polyelectrolyte precipitation represents a green, innovative alternative for protein recovery; however, there are reduced data regarding its pilot or industrial-scale application. In this literature work, the action mechanism and principles with regards to its functionality and insights for its application on a big scale are reviewed. Overall, this review discusses the novelty and sustainability of protein precipitation by polyelectrolytes from different sources against traditional techniques as well as highlights the relationship between protein source, production relevance and bioactive properties that are key factors to maximize the application of this extractive method on a circular economy context.

Microwave-assisted extraction of pectin from grape pomace

The utilization of microwave technique for the pectin extraction from grape pomace (Fetească Neagră and Rară Neagră), its influence on yield, galacturonic acid content, degree of esterification and molecular weight of pectin were analyzed. The optimal conditions of the extraction process were microwave power of 560 W, pH of 1.8 for 120 s. The pectin samples extracted by MAE in optimal conditions were analyzed by comparing with commercial apple and citrus pectin based on FT-IR analysis, thermal behavior, rheological characteristics and microstructure. The FT-IR analysis established the presence of different functional groups which are attributed to the finger print region of extracted pectin, while the rheological behavior presented a good viscoelasticity of pectin solutions. The obtained data assumes that grape pomace has a great potential to be a valuable source of pectin which can be extracted by simple and quick techniques, while maintaining analogous quality to conventional sources of pectin.