Mitigation of harmful algal blooms using modified clays: Theory, mechanisms, and applications

Insights into the differential removal of various red tide organisms using modified clay: Influence of biocellular properties and mechanical interactions

In recent years, red tides have increased worldwide in frequency, intensity, involving a higher number of causative species during the events. As the most commonly used method for control of red tides, modified clay (MC) was found to have differential ability to remove various red tide species. However, the underlying mechanisms have not yet been completely elucidated. In this study, the use of MC to remove three typical disaster-causing species, Aureococcus anophagefferens, Prorocentrum donghaiense and Heterosigma akashiwo, was investigated, and differential removal of these species was probed with insights into their biocellular properties and mechanical interactions. The results showed that removal efficiencies of the three species by MC decreased in the order P. donghaiense > A. anophagefferens > H. akashiwo, while the sedimentation rates decreased in the order H. akashiwo > P. donghaiense > A. anophagefferens. Analyses of the cell surface properties and redundancy analysis (RDA) revealed that the highest surface zeta potential of -5.32±0.39 mV made P. donghaiense the most easily removed species; the smallest cell size of 3.30±0.03 μm facilitated the removal of A. anophagefferens; and the highest hydrophobicity with a H2O surface contact angle of 98.50±4.31° made the removal of H. akashiwo difficult. X-ray photoelectron spectroscopy (XPS) data indicated that the electronegativity of P. donghaiense was caused by carboxyl groups and phosphodiester groups, and the hydrophobicity of H. akashiwo was associated with a high C-(C, H) content on the cell surface. According to the extended Derjaguin, Landau, Verwey, and Overbeek (ex-DLVO) theory calculation, differences in the interaction energies between MC and the three red tide species effectively explained their different sedimentation rates. In addition, the degree of oxidative damage caused by MC to the three red tide species differed, which also affected the removal of red tide organisms.

An effective algaecide for the targeted destruction of Karenia brevis

We address the targeted destruction of Karenia brevis using the algaecide calcium peroxide, in tandem with the flocculation and sinking of the species. The specific aspect of the approach is the incorporation of the algaecide within the floc to rapidly kill K. brevis, thus minimizing escape of cells from the floc and reentry to the water column. CaO₂ gradually produces H₂O₂, which diffuses through cell membranes and induces oxidative stress, leading to cell death via excessive reactive oxygen species (ROS) formation. The effect of varying doses of calcium peroxide on K. brevis cells was measured with pulse amplitude modulated fluorometry and indicated that doses as low as 30 mg/L when integrated into flocs are effective in suppressing photosynthesis. Cell viability assays also indicate that such low levels are sufficient to cause cell death in a 3-6 hour time period. Thus, the proposed technology involving the incorporation of calcium peroxide in a cationic flocculating agent (polyaluminum chloride, PAC) leads to an inexpensive and scalable technology to mitigate harmful algal blooms of K. brevis.

Typical Marine Ecological Disasters in China Attributed to Marine Organisms and Their Significant Insights

Owing to global climate change or the ever-more frequent human activities in the offshore areas, it is highly probable that an imbalance in the offshore ecosystem has been induced. However, the importance of maintaining and protecting marine ecosystems' balance cannot be overstated. In recent years, various marine disasters have occurred frequently, such as harmful algal blooms (green tides and red tides), storm surge disasters, wave disasters, sea ice disasters, and tsunami disasters. Additionally, overpopulation of certain marine organisms (particularly marine faunas) has led to marine disasters, threatening both marine ecosystems and human safety. The marine ecological disaster monitoring system in China primarily focuses on monitoring and controlling the outbreak of green tides (mainly caused by outbreaks of some Ulva species) and red tides (mainly caused by outbreaks of some diatom and dinoflagellate species). Currently, there are outbreaks of Cnidaria (Hydrozoa and Scyphozoa organisms; outbreak species are frequently referred to as jellyfish), Annelida (Urechis unicinctus Drasche, 1880), Mollusca (Philine kinglipini S. Tchang, 1934), Arthropoda (Acetes chinensis Hansen, 1919), and Echinodermata (Asteroidea organisms, Ophiuroidea organisms, and Acaudina molpadioides Semper, 1867) in China. They not only cause significant damage to marine fisheries, tourism, coastal industries, and ship navigation but also have profound impacts on marine ecosystems, especially near nuclear power plants, sea bathing beaches, and infrastructures, posing threats to human lives. Therefore, this review provides a detailed introduction to the marine organisms (especially marine fauna species) causing marine biological disasters in China, the current outbreak situations, and the biological backgrounds of these outbreaks. This review also provides an analysis of the causes of these outbreaks. Furthermore, it presents future prospects for marine biological disasters, proposing corresponding measures and advocating for enhanced resource utilization and fundamental research. It is recommended that future efforts focus on improving the monitoring of marine biological disasters and integrating them into the marine ecological disaster monitoring system. The aim of this review is to offer reference information and constructive suggestions for enhancing future monitoring, early warning systems, and prevention efforts related to marine ecological disasters in support of the healthy development and stable operation of marine ecosystems.

BTXs removals by modified clay during mitigation of Karenia brevis bloom: Insights from adsorption and transformation

Harmful algal blooms (HABs), especially those caused by toxic dinoflagellates, are spreading in marine ecosystems worldwide. Notably, the prevalence of Karenia brevis blooms and potent brevetoxins (BTXs) pose a serious risk to public health and marine ecosystems. Therefore, developing an environmentally friendly method to effectively control HABs and associated BTXs has been the focus of increasing attention. As a promising method, modified clay (MC) application could effectively control HABs. However, the environmental fate of BTXs during MC treatment has not been fully investigated. For the first time, this study revealed the effect and mechanism of BTX removal by MC from the perspective of adsorption and transformation. The results indicated that polyaluminium chloride-modified clay (PAC-MC, a typical kind of MC) performed well in the adsorption of BTX2 due to the elevated surface potential and more binding sites. The adsorption process was a spontaneous endothermic process that conformed to pseudo-second-order adsorption kinetics (k2 = 6.8 × 10-4, PAC-MC = 0.20 g L-1) and the Freundlich isotherm (Kf = 55.30, 20 °C). In addition, detailed product analysis using liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) indicated that PAC-MC treatment effectively removed the BTX2 and BTX3, especially those in the particulate forms. Surprisingly, PAC-MC could promote the transformation of BTX2 to derivatives, including OR-BTX2, OR-BTX3, and OR-BTX-B5, which were proven to have lower cytotoxicity.

A synthetic and transparent clay removes Microcystis aeruginosa efficiently

Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite's effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.

Insights into how characteristics of dissolved algal organic matter affect the efficiency of modified clay in controlling harmful algal blooms

Dissolved algal organic matter (dAOM) originating from harmful algal blooms (HABs) can deteriorate the quality of municipal water supplies, threaten the health of aquatic environments, and interfere with modified clay (MC)-based HABs control measures. In this study, we explored the composition of dAOM from Prorocentrum donghaiense, a typical HAB organism, and assessed the influence of dAOM on MC flocculation. Our results suggested that dAOM composition was complex and had a wide molecular weight (MW) distribution. MW and electrical properties were important dAOM characteristics affecting flocculation and algal removal efficiency of MC. Negatively charged high-MW components (>50 kDa) critically affected algal removal efficiency, reducing the zeta potential of MC particles and leading to small and weak flocs. However, the effect of dAOM depended on its concentration. When the cell density of P. donghaiense reached HAB levels, the high-MW dAOM strongly decreased the algal removal efficiency of MC.

Simultaneous removal of nutrients and biological pollutants via specialty absorbents in a water filtration system for watershed remediation

To investigate watershed remediation within a Total Maximum Daily Load program, this study examined the field-scale filtration performance of two specialty absorbents. The goal was to simultaneously remove nutrients and biological pollutants along Canal 23 (C-23) in the St. Lucie River Basin, Florida. The filtration system installed in the C-23 river corridor was equipped with either clay-perlite with sand sorption media (CPS) or zero-valent iron and perlite green environmental media (ZIPGEM). Both media were formulated with varying combinations of sand, clay, perlite, and/or recycled iron based on distinct recipes. In comparison with CPS, ZIPGEM exhibited higher average removal percentages for nutrients. Findings indicated that ZIPGEM could remove total nitrogen up to 49.3%, total Kjeldahl nitrogen up to 67.1%, dissolved organic nitrogen (DON) up to 72.9%, total phosphorus up to 79.6%, and orthophosphate up to 73.2%. Both ZIPGEM and CPS demonstrated similar efficiency in eliminating biological pollutants, such as E. coli (both media exhibiting an 80% removal percentage) and chlorophyll a (both media achieving approximately 95% removal). Seasonality effects were also evident in nutrient removal efficiencies, particularly in the case of ammonia nitrogen; the negative removal efficiency of ammonia nitrogen from the fifth sampling event could be attributed to processes such as photochemical ammonification, microbial transformation, and mineralization of DON in wet seasons. Overall, ZIPGEM demonstrated a more stable nutrient removal efficiency than CPS in the phase of seasonal changes.

Unveiling the trifecta of cyanobacterial quorum sensing: LuxI, LuxR and LuxS as the intricate machinery for harmful algal bloom formation in freshwater ecosystems

Harmful algal blooms (HABs) are causing significant disruptions in freshwater ecosystems, primarily due to the proliferation of cyanobacteria. These blooms have a widespread impact on various lakes globally, leading to profound environmental and health consequences. Cyanobacteria, with their ability to produce diverse toxins, pose a particular concern as they negatively affect the well-being of humans and animals, exacerbating the situation. Notably, cyanobacteria utilize quorum sensing (QS) as a complex communication mechanism that facilitates coordinated growth and toxin production. QS plays a critical role in regulating the dynamics of HABs. However, recent advances in control and mitigation strategies have shown promising results in effectively managing and reducing the occurrence of HABs. This comprehensive review explores the intricate aspects of cyanobacteria development in freshwater ecosystems, explicitly focusing on deciphering the signaling molecules associated with QS and their corresponding genes. Furthermore, a concise overview of diverse measures implemented to efficiently control and mitigate the spread of these bacteria will be provided, shedding light on the ongoing global efforts to address this urgent environmental issue. By deepening our understanding of the mechanisms driving cyanobacteria growth and developing targeted control strategies, we hope to safeguard freshwater ecosystems and protect the health of humans and animals from the detrimental impacts of HABs.

Mesocosm study of PAC-modified clay effects on Karenia brevis cells and toxins, chemical dynamics, and benthic invertebrate physiology

Modified clay compounds are used globally as a method of controlling harmful algal blooms, and their use is currently under consideration to control Karenia brevis blooms in Florida, USA. In 1400 L mesocosm tanks, chemical dynamics and lethal and sublethal impacts of MC II, a polyaluminum chloride (PAC)-modified kaolinite clay, were evaluated over 72 h on a benthic community representative of Sarasota Bay, which included blue crab (Callinectes sapidus), sea urchin (Lytechinus variegatus), and hard clam (Mercenaria campechiensis). In this experiment, MC II was dosed at 0.2 g L-1 to treat bloom-level densities of K. brevis at 1 × 106 cells L-1. Cell removal in MC II-treated tanks was 57% after 8 h and 95% after 48 h. In the water column, brevetoxin analogs BTx-1 and BTx-2 were found to be significantly higher in untreated tanks at 24 and 48 h, while in MC II-treated tanks, BTx-3 was found to be higher at 48 h and BTx-B5 was found to be higher at 24 and 48 h. In MC II floc, we found no significant differences in BTx-1 or BTx-2 between treatments for any time point, while BTx-3 was found to be significantly higher in the MC II-treated tanks at 48 and 72 h, and BTx-B5 was higher in MC II-treated tanks at 24 and 72 h. Among various chemical dynamics observed, it was notable that dissolved phosphorus was consistently significantly lower in MC II tanks after 2 h, and that turbidity in MC II tanks returned to control levels 48 h after treatment. Dissolved inorganic carbon and total seawater alkalinity were significantly reduced in MC II tanks, and partial pressure of CO2 (pCO2) was significantly higher in the MC II-only treatment after 2 h. In MC II floc, particulate phosphorus was found to be significantly higher in MC II tanks after 24 h. In animals, lethal and sublethal responses to MC II-treated K. brevis did not differ from untreated K. brevis for either of our three species at any time point, suggesting MC II treatment at this dosage has negligible impacts to these species within 72 h of exposure. These results appear promising in terms of the environmental safety of MC II as a potential bloom control option, and we recommend scaling up MC II experiments to field trials in order to gain deeper understanding of MC II performance and dynamics in natural waters.

Electrophysiological techniques in marine microalgae study: A new perspective for harmful algal bloom (HAB) research

Electrophysiological techniques, by measuring bioelectrical signals and ion channel activities in tissues and cells, are now widely utilized to study ion channel-related physiological functions and their underlying mechanisms. Electrophysiological techniques have been extensively employed in the investigation of animals, plants, and microorganisms; however, their application in marine algae lags behind that in other organisms. In this paper, we present an overview of current electrophysiological techniques applicable to algae while reviewing the historical usage of such techniques in this field. Furthermore, we explore the potential specific applications of electrophysiological technology in harmful algal bloom (HAB) research. The application prospects in the studies of stress tolerance, competitive advantage, nutrient absorption, toxin synthesis and secretion by HAB microalgae are discussed and anticipated herein with the aim of providing novel perspectives on HAB investigations.

What makes a cyanobacterial bloom disappear? A review of the abiotic and biotic cyanobacterial bloom loss factors

Cyanobacterial blooms present substantial challenges to managers and threaten ecological and public health. Although the majority of cyanobacterial bloom research and management focuses on factors that control bloom initiation, duration, toxicity, and geographical extent, relatively little research focuses on the role of loss processes in blooms and how these processes are regulated. Here, we define a loss process in terms of population dynamics as any process that removes cells from a population, thereby decelerating or reducing the development and extent of blooms. We review abiotic (e.g., hydraulic flushing and oxidative stress/UV light) and biotic factors (e.g., allelopathic compounds, infections, grazing, and resting cells/programmed cell death) known to govern bloom loss. We found that the dominant loss processes depend on several system specific factors including cyanobacterial genera-specific traits, in situ physicochemical conditions, and the microbial, phytoplankton, and consumer community composition. We also address loss processes in the context of bloom management and discuss perspectives and challenges in predicting how a changing climate may directly and indirectly affect loss processes on blooms. A deeper understanding of bloom loss processes and their underlying mechanisms may help to mitigate the negative consequences of cyanobacterial blooms and improve current management strategies.

Inhibitory effect and mechanism of algicidal bacteria on Chaetomorpha valida

Chaetomorpha valida, filamentous green tide algae, poses a significant threat to both aquatic ecosystems and aquaculture. Vibrio alginolyticus Y20 is a new algicidal bacterium with an algicidal effect on C. valida. This study aimed to investigate the physiological and molecular responses of C. valida to exposure to V. alginolyticus Y20. The inhibitory effect of V. alginolyticus Y20 on C. valida was content dependent, with the lowest inhibitory content being 3 × 105 CFU mL-1. The microscopic results revealed that C. valida experienced severe morphological damage under the influence of V. alginolyticus Y20, with a dispersion of intracellular pigments. V. alginolyticus Y20 caused the decrease in chlorophyll-a content and Fv/Fm in C. valida. At the molecular level, V. alginolyticus Y20 downregulated the expression of genes related to photosynthetic pigment synthesis, light capture, and electron transport. Furthermore, V. alginolyticus Y20 induced oxidative damage to algal cells. The production of reactive oxygen species significantly increased after 11 days of exposure. Malondialdehyde content significantly increased, and the cell membranes were severely damaged by lipid peroxidation. The content of superoxide dismutase and peroxidase also markedly increased, whereas catalase content decreased significantly. Additionally, peroxisomes were inhibited due to the downregulation of PEX expression, leading to irreversible oxidative damage to algal cells. Our findings provided a new theoretical basis for exploring the interaction between algicidal bacteria and green tide algae at the molecular level.

Hydrogen peroxide as a mitigation against Microcystis sp. bloom

Microcystis sp. is a harmful cyanobacterial species commonly seen in earthen ponds. The overgrowth of these algae can lead to fluctuations in water parameters, including DO and pH. Also, the microcystins produced by these algae are toxic to aquatic animals. This study applied hydrogen peroxide (7 mg/L) to treat Microcystis sp. in a laboratory setting and in three earthen pond trials. In the lab we observed a 64.7% decline in Microcystis sp. And in our earthen pond field experiments we measured, on average, 43% reductions in Microcystis sp. cell counts within one hour. The treatment was found to eliminate specifically Microcystis sp. and did not reduce the cell count of the other algae species in the pond. A shift of the algae community towards the beneficial algae was also found post-treatment. Lastly, during the pond trials, the gill status of Tilapia and Giant tiger prawn were not affected by the H2O2 treatment suggesting this may be a good mitigation strategy for reducing cyanobacteria in pond aquaculture.

Harmful algal blooms in China: History, recent expansion, current status, and future prospects

The impacts of harmful algal blooms (HABs) on economies, public health, ecosystems, and aquaculture across the globe have all increased in recent decades, and this has been acutely the case in China. Here, we review the history of HABs and HABs research in China, as well as recent trends in HABs and future prospects of HAB science in China. The most updated analyses demonstrated that the number of HAB events, the number of HAB species, the aerial coverage of HABs, and the impacts of HABs in Chinese waters during the 21st century were all higher than that during the last two decades of the 20th century. The increase in the number of HABs in China has been significantly correlated with the increased discharge of ammonium and total phosphorus into coastal waters (p < 0.01 for both). Notable newly recognized events this century have included chronic HABs caused by Prorocentrum donghaiense and Karenia mikimotoi, a paralytic shellfish poisoning event caused by Gymnodinium catenatum that sickened 80 people, brown tides caused by Aureococcus anophagefferens, green tides caused by Ulva prolifera, golden tides caused by Sargassum horneri, and the disruption of a nuclear power plant caused by a bloom of Phaeocystis globosa. A series of key discoveries regarding HABs has been made this century including documentation of nearly all known HAB toxins in Chinese waters, discovery of novel cyst-formation and/or life stages of multiple HABs-causing species, identification of the chemical and physical oceanographic drivers of multiple HABs including those formed by P. donghaiense, K. mikimotoi, and U. prolifera, and the successful mitigation of HABs via the use of modified clay approaches. Future research prospects highlighted include the use of macroalgae as a means to prevent, mitigate, and control (PCM) HABs and the process by which multi-disciplinary studies involving molecular approaches (omics), remote in situ detection, artificial intelligence, and mega-data analyses might be used to develop refined and realistic HAB forecasting platforms. Collectively, this review demonstrates the significant evolution of HAB science since the 20th century in China and demonstrates that while HABs in China are complex and widespread, recent and on-going discoveries make the development of detailed understanding and effective measures to mitigate the negative effects of HABs a hopeful outcome in the coming years.

Exposure of blue crab (Callinectes sapidus) to modified clay treatment of Karenia brevis as a bloom control strategy

Harmful algal blooms (HABs) of the toxic marine dinoflagellate Karenia brevis, commonly called red tides, are an ongoing threat to human health and marine ecosystems in Florida. Clay flocculation is a standard control strategy for marine HABs in China and Korea and is currently being assessed for use in the United States. We evaluated the effects of a PAC-modified clay called Modified Clay II on mortality, eyestalk reflexes, and righting reflexes of 48 adult blue crabs (Callinectes sapidus). Crabs were exposed to clay alone (0.5 g L - 1), untreated K. brevis (1 × 106 cells L - 1), or a combination of K. brevis and clay for eight days. Clay treatment reduced cell concentrations in the water column by 95% after 24 h. We detected no significant differences in mortality, righting reflexes, or eyestalk reflexes between treatments. Our results indicate that the clay alone is not harmful to adult crabs at typical treatment concentrations within the measured time frame, and that treatment of K. brevis with this clay appears to have a negligible impact on crab mortality and the reflex variables we measured. These results suggest that Modified Clay II may be a viable option to treat K. brevis blooms without impacting adult blue crab populations. Additional controlled experiments and field tests are needed to further evaluate the impact of clay on natural benthic communities.

The molecular mechanisms and environmental effects of modified clay control algal blooms in aquacultural water

Modified clay (MC) technology is an effective method for controlling harmful algal blooms (HABs). Based on field experience, a bloom does not continue after treatment with MC, even though the residual HAB biomass accounts for 20-30% of the initial biomass. Laboratory studies using unialgal cultures have found that MC could inhibit the growth of the residual algal cells to prevent HABs. Nevertheless, the phytoplankton in field waters is diverse. Therefore, unclassified complex mechanisms may exist. To illustrate the molecular mechanisms through which MC controls HABs in the field and verify the previous laboratory findings, a series of experiments and bioinformatics analyses were conducted using bloom waters from aquacultural ponds. The results showed that a 72.29% removal efficiency of algal biomass could effectively control blooms. The metatranscriptomic results revealed that the number of downregulated genes (131,546) was greater than that of upregulated genes (24,318) at 3 h after MC addition. Among these genes, several genes related to DNA replication were downregulated; however, genes involved in DNA repair were upregulated. Metabolism-related pathways were the most significantly upregulated (q < 0.05), including photosynthesis and oxidative phosphorylation. The results also showed that MC reduced most of the biomass of the dominant phytoplankton species, likely by removing apical dominance, which increased the diversity and stability of the phytoplankton community. In addition to reducing the pathogenic bacterial density, MC reduced the concentrations of PO₄^3- (96.22%) and SiO₃^2- (66.77%), thus improving the aquaculture water quality, altering the phytoplankton community structure (the proportion of Diatomea decreased, and that of Chlorophyta increased), and inhibiting phytoplankton growth. These effects hindered the rapid development of large phytoplankton biomasses and allowed the community structure to remain stable, reducing HAB threats. This study illustrates the molecular mechanisms through which MC controls HABs in the field and provides a scientific method for removing HABs in aquacultural waters.

Metabarcoding analysis identifies high diversity of harmful algal bloom species in the coastal waters of the Beibu Gulf

Harmful algal blooms (HABs) have occurred more frequently in recent years. In this study, to investigate their potential impact in the Beibu Gulf, short-read and long-read metabarcoding analyses were combined for annual marine phytoplankton community and HAB species identification. Short-read metabarcoding showed a high level of phytoplankton biodiversity in this area, with Dinophyceae dominating, especially Gymnodiniales. Multiple small phytoplankton, including Prymnesiophyceae and Prasinophyceae, were also identified, which complements the previous lack of identifying small phytoplankton and those unstable after fixation. Of the top 20 phytoplankton genera identified, 15 were HAB-forming genera, which accounted for 47.3%-71.5% of the relative abundance of phytoplankton. Based on long-read metabarcoding, a total of 147 OTUs (PID > 97%) belonging to phytoplankton were identified at the species level, including 118 species. Among them, 37 species belonged to HAB-forming species, and 98 species were reported for the first time in the Beibu Gulf. Contrasting the two metabarcoding approaches at the class level, they both showed a predominance of Dinophyceae, and both included high abundances of Bacillariophyceae, Prasinophyceae, and Prymnesiophyceae, but the relative contents of the classes varied. Notably, the results of the two metabarcoding approaches were quite different below the genus level. The high abundance and diversity of HAB species were probably due to their special life history and multiple nutritional modes. Annual HAB species variation revealed in this study provided a basis for evaluating their potential impact on aquaculture and even nuclear power plant safety in the Beibu Gulf.

Uncovering the regulation effect of modified clay on toxin production in Alexandrium pacificum: From physiological insights

As a common dinoflagellate, Alexandrium pacificum can produce paralytic shellfish toxins (PSTs). It can be removed from water by Polyaluminium chloride modified clay (PAC-MC), but it is unclear whether PAC-MC can prevent PSTs content and toxicity from increasing and whether PAC-MC can stimulate PSTs biosynthesis by A. pacificum. Effect of PAC-MC on PSTs and the physiological mechanism were analysed here. The results showed total PSTs content and toxicity decreased respectively by 34.10 % and 48.59 % in 0.2 g/L PAC-MC group at 12 days compared with control group. And the restriction of total PSTs by PAC-MC was mainly achieved via inhibition of algal cell proliferation, by affecting A. pacificum physiological processes and changing phycosphere microbial community. Meanwhile, single-cell PSTs toxicity did not increase significantly throughout the experiment. Moreover, A. pacificum treated with PAC-MC tended to synthesize sulfated PSTs such as C1&2. Mechanistic analysis showed that PAC-MC induced upregulation of sulfotransferase sxtN (related to PSTs sulfation), and functional prediction of bacterial community also showed significant enrichment of "sulfur relay system" after PAC-MC treatment, which might also promote PSTs sulfation. The results will provide theoretical guidance for the application of PAC-MC to field control of toxic Alexandrium blooms.

The synthesis of an acrylamide copolymer and its synergistic effects on clay flocculation of red tide organisms

The modified clay (MC) method is a common emergency treatment technology for red tides, and the selection of surface modifiers is the key to the MC technology. A cationic polymeric modifier, the copolymer of dimethyl diallyl ammonium chloride and acrylamide (P (DMDAAC-co-AM), PDA) was optimized via a visible-light-induced polymerization technique. The PDA-modified clay (PDAMC) was prepared with strong salt tolerance and achieved efficiencies of 86% at the concentration of 50 mg L^-1, and the dose was 90% lower than that of aluminum polychloride-modified clay (PACMC). While polyacrylamide and commercial PDA can achieve efficiencies of only 25 and 67%, respectively, but high doses were required. This is because PDA changed the surface charges of clay particles from negative to positive, which promotes the formation of the polymer-chains bridging network to overcome the difficulties of curling in seawater. According to the analysis of flocculation parameters and spatial conformation of PDAMC, the high salinity tolerance of the PDAMC was attributed to the synergistic processes of charge neutralization and the three-dimensional network bridging. Therefore, this study has developed a highly effective flocculant material used in seawater and provided an important reference for the management of red tide organisms.

Degradation of paralytic shellfish toxins during flocculation of Alexandrium pacificum by an oxidized modified clay: A laboratory experiment

Paralytic shellfish toxins (PSTs), produced by Alexandrium pacificum in the marine environment, are a group of potent neurotoxins which specifically block voltage-gated sodium channels in excitable cells. During the toxigenic A. pacificum blooms outbreaks, PSTs can be accumulated through the food chain and finally enter the human body, posing a significant threat to human health and safety. This study experimented with a novel type of oxidized modified clay, potassium peroxymonosulfate modified clay (PMPS-MC), which could remove A. pacificum cells as well as reduce intracellular and extracellular PSTs toxicity rapidly. For the extracellular PSTs, its content decreased to below the detection limit rapidly through oxidative degradation within 15 min of 10 mg/L PMPS-MC treatment. Whereafter, although the residual cells in water column and some viable cells in flocculated sediment continued to secrete toxins, the extracellular PSTs content and toxicity in the PMPS-MC treatment groups remained significantly lower than those in the control group. For the intracellular PSTs, PMPS-MC might induce the transformation of more toxic GTX1&4 to less toxic GTX2&3 and C1&2, resulting in intracellular PSTs toxicity reduced within 15 min. In addition, intracellular PSTs content and toxicity in the PMPS-MC treatment groups were consistently lower than the control group within 48 h, possibly by inhibiting the A. pacificum cells growth. These results will provide a scientific basis for the field application of modified clay to control A. pacificum blooms.

Improvement and application of qPCR assay revealed new insight on early warning of Phaeocystis globosa bloom

Phaeocystis globosa bloom develops from its early solitary cells, providing clues for early warning of its bloom and timely responding to possible consequences. However, the early prediction requires quantification of the solitary cells for a thorough understanding of bloom formation. Therefore, we developed an accurate, sensitive, and specific qPCR assay for this need. Results show that the accuracy of qPCR was significantly enhanced by ameliorating DNA barcode design, improving genomic DNA extraction, and introducing a strategy of internal amplification control (IAC). This approach reached a quantification limit of 1 cell/reaction, making low-abundance cells (10¹-10³ cells/L) detection possible, and we also observed a plunge in the abundance of the solitary cells before the bloom outbreak in two winters in 2019 and 2020 for the first time, which is quite unique from laboratory results showing an increase instead. The plunge in solitary-cell abundance might be associated with the attachment of solitary cells to solid matrices to form non-solitary attached aggregate, the precursor of colonies, which gains supports from other studies and needs more investigations in the future. Therefore, as the plunge in solitary-cell abundance is a sign of colony formation, it can be used as an early warning indicator to P. globosa bloom.

Current environmental status of the oyster farms on Lake Kamo in Japan; viral control of the harmful bloom of Heterocapsa circularisquama

Lake Kamo is an enclosed, low-inflow estuary connected to the open sea that is famous for oyster farming in Japan. In the fall of 2009, this lake experienced its first bloom of the dinoflagellate Heterocapsa circularisquama, which selectively kills bivalve mollusks. This species has been detected exclusively in southwestern Japan. The completely unexpected outbreak of H. circularisquama in the northern region is believed to have been caused by the contamination of purchased seedlings with this species. The water quality and nutrient data collected by our group from July through October over the past 10 years revealed that the environment of Lake Kamo has not changed significantly. However, in the open water around Sado Island, where Lake Kamo is located, the water temperature has increased by 1.80 °C in the last 100 years, which is equivalent to 2-3-fold the world average. This has resulted in a rise in the sea level, which is expected to further deteriorate the water exchange between Lake Kamo and the open sea and low dissolved oxygen in the bottom layer of the Lake and the associated dissolution of nutrients from the bottom sediment. Therefore, seawater exchange has become insufficient and the lake has become nutrient rich, making it prone to the establishment of microorganisms, such as H. circularisquama, once they have been introduced. We developed a method to mitigate the damage caused by the bloom by spraying sediments containing the H. circularisquama RNA virus (HcRNAV), which infects H. circularisquama. After ∼10 years of performing various verification tests, including field trials, this method was used at the Lake in 2019. During the 2019 H. circularisquama growth season, a small amount of sediment containing HcRNAV was sprayed on the lake three times, which resulted in a decrease in H. circularisquama and an increase in HcRNAV, indicating that this method is effective in diminishing the bloom.

Isolation and characterization of a high-efficiency algicidal bacterium Pseudoalteromonas sp. LD-B6 against the harmful dinoflagellate Noctiluca scintillans

The dinoflagellate Noctiluca scintillans is a harmful algal species that is globally distributed and poses a certain threat to marine ecosystems. Recent research has shown that the application of algicidal bacteria is a promising method to prevent and control such harmful algal blooms (HABs), given its advantages of safety and efficiency. In this study, a strain of algicidal bacterium LD-B6 with high efficiency against N. scintillans was isolated from the coastal waters of Lianyungang, China. 16S rDNA sequence analysis showed that the strain LD-B6 belongs to the genus Pseudoalteromonas. Furthermore, the algicidal effect of LD-B6 on N. scintillans was investigated. The results showed that strain LD-B6 exerted strong algicidal activity against N. scintillans. After 12 h of bacterial culture addition to algal cultures at a 2% final volume rate, the algicidal activity reached 90.5%, and the algicidal activity of LD-B6 was influenced by the density of N. scintillans. In addition, the algicidal bacterium LD-B6 was found to indirectly lyse algal cells by secreting extracellular compounds. These algicidal compounds were stable, indicating that they are not proteins. Importantly, strain LD-B6 was broadly general, showing varying degrees of lysing effects against five of the six algal species tested. On the basis of the described studies above, the algicidal powder was also initially developed. In summary, the isolated bacterial strain LD-B6 shows the potent algicidal capability to serve as a candidate algicidal bacterium against N. scintillans blooms.

Effective Early Treatment of Microcystis Exponential Growth and Microcystin Production with Hydrogen Peroxide and Hydroxyapatite

Mitigating cyanotoxin production is essential to protecting aquatic ecosystems and public health. However, current harmful cyanobacterial bloom (HCB) control strategies have significant shortcomings. Because predicting HCBs is difficult, current HCB control strategies are employed when heavy HCBs have already occurred. Our pilot study developed an effective HCB prediction approach that is employed before exponential cyanobacterial growth and massive cyanotoxin production can occur. We used a quantitative polymerase chain reaction (qPCR) assay targeting the toxin-encoding gene mcyA to signal the timing of treatment. When control measures were applied at an early growth stage or one week before the exponential growth of Microcystis aeruginosa (predicted by qPCR signals), both hydrogen peroxide (H2O2) and the adsorbent hydroxyapatite (HAP) effectively stopped M. aeruginosa growth and microcystin (MC) production. Treatment with either H2O2 (10 mg·L-1) or HAP (40 µm particles at 2.5 g·L-1) significantly reduced both mcyA gene copies and MC levels compared with the control in a dose-dependent manner. While both treatments reduced MC levels similarly, HAP showed a greater ability to reduce mcyA gene abundance. Under laboratory culture conditions, H2O2 and HAP also prevented MC production when applied at the early stages of the bloom when mcyA gene abundance was below 105 copies·mL-1.

Inhibitory effects of Ipomoea cairica extracts on the harmful algae Phaeocystis globosa

Ipomoea cairica (L.) Sweet is an invasive plant that cause serious invasion and damage in South China. Phaeocystis globosa is a common harmful algal bloom species on the southeast coast of China. Both species cause great environmental disturbances and serious economic damage to the localregion. This study explored the potential inhibitory effects of I. cairica leaf extracts on P. globosa. The results showed that solitary cells growth was inhibited at extract concentrations higher than 0.25 % (v/v). Although the colony diameter did not change, and the colony number increased rapidly in the first 36 h, we found that cells in the colonies had been damaged using scanning electron microscope and SYTOX-Green staining at 48 h. In addition, the rapid light-response curve of cells treated with extracts decreased, along with down-regulation of photosynthesis-related genes (psbA, psbD, and rbcL), suggesting damage to the photosynthetic system. Finally, the activities of antioxidant enzymes including superoxide dismutase, peroxidase, and catalase increased with increasing treatment time, indicating that cells activate antioxidant enzyme defense systems to alleviate the production of reactive oxygen species (ROS). Increased ROS levels disrupt cell membranes, alter cellular ultrastructures, and ultimately lead to cell death. This study not only achieved the reuse of invasive plant resources, but also demonstrated that I. cairica leaf extract has potential value as an algaecide.

Treatment of the red tide dinoflagellate Karenia brevis and brevetoxins using USEPA-registered algaecides

The effectiveness of USEPA-registered algaecides for managing algae in lakes and reservoirs has been extensively evaluated in laboratory studies, mesocosm studies and in situ treatment. However, the use of these algaecides in marine environments for the management of dinoflagellates and associated toxins remains largely unknown. Karenia brevis is a toxic dinoflagellate that causes red tides in the Gulf of Mexico. In this study, we investigated the efficacy of six USEPA-registered algaecides, three copper-based and three peroxide-based, on treating toxic K. brevis with a natural bloom density (1.79 × 10⁷ cells/L). Our results indicate that the application of as low as 0.31-0.34 mg Cu/L led to a significant decrease of K. brevis cells within 24 h after treatment, while peroxide-based algaecides required a relatively higher concentration for the effective removal of K. brevis cells (4.89-7.08 mg H₂O₂/L), but still lower than maximum label rate. Total brevetoxin levels 72 h after treatment revealed that 1.00 mg Cu/L for Algimycin® PWF, 6.48 mg H₂O₂/L for PAK® 27 and 7.08 mg H₂O₂/L for Oximycin® P5 had the greatest impact on decreasing toxin levels. The correlation analysis showed that brevetoxin reduction rate was significantly positively related with the peroxide-based algaecide exposure concentration, which is caused by the oxidation of hydroxyl radicals produced by hydrogen peroxide. The degradation dynamics of the three peroxide-based algaecides revealed that salinity, microorganisms and organic matter (≥ 0.2 μm) impact the stability of hydrogen peroxide, and Oximycin® P5 showed the highest stability among tested peroxide-based algaecides with a degradation rate of 0.467 mg/d in natural seawater. Hence, our laboratory work provided new insights into potential emergency treatment methods for immediate mitigation of K. brevis and brevetoxins. More work on the fate and persistence of algaecide active ingredients and phycotoxins, effects of site characteristics, and pilot studies on marine non-targets are still needed before safe application of this method for HABs in marine systems.

Effects of modified clay on the formation of Phaeocystis globosa colony revealed by physiological and transcriptomic analyses

The harmful algal bloom (HAB) species Phaeocystis globosa is commonly observed in global temperate and tropical oceans, and colonies of P. globosa exhibit a dominant morphotype during blooms. The use of polyaluminium chloride modified clay (PAC-MC) is an effective mitigation strategy for P. globosa blooms. Although previous studies have found that PAC-MC can stimulate P. globosa colony formation at low concentrations and inhibit it at higher concentrations, the underlying mechanisms of these effects are poorly understood. Here, we comprehensively compared the physiochemical indices and transcriptomic response of residual P. globosa cells after treatment with two concentrations of PAC-MC. The results showed that PAC-MC induced oxidative stress, photosynthetic inhibition, and DNA damage in residual cells. Moreover, it could activate antioxidant responses and enhance the repair of photosynthetic structure and DNA damage in cells. The biosynthesis of polysaccharides was enhanced and genes associated with cell motility were down-regulated after treatment with PAC-MC, resulting in the accumulation of colonial matrixes. After treatment with a low concentration of PAC-MC (0.1 g/L), the residual cells were slightly stressed, including physical damage, oxidative stress and other damage, and polysaccharide synthesis was enhanced to promote colony formation to alleviate environmental stress. Moreover, the damage to residual cells was slight; thus, normal cell function provided abundant energy and matter for colony formation. After treatment with a high concentration of PAC-MC (0.5 g/L), the residual cells suffered severe damage, which disrupted normal physiological processes and inhibited cell proliferation and colony formation. The present study elucidated the concentration-dependent mechanism of PAC-MC affecting the formation of P. globosa colonies and provided a reference for the application of PAC-MC to control P. globosa blooms.

Interannual and Decadal Changes in Harmful Algal Blooms in the Coastal Waters of Fujian, China

The temporal and spatial variability of harmful algal blooms (HABs) in coastal waters of Fujian were analyzed at interannual and decadal scales based on recorded HAB events collected from 1956 to 2019. The number and impact area of HABs exhibited little change from 1959 to the 1990s, sharply increased from the 1990s to 2000s, and decreased from the 2000s to 2010s. The highest number and greatest coverage of blooms occurred in the 2000s. The proportion of HABs caused by dinoflagellates increased, while the proportion caused by diatoms decreased from the 2000s to the 2010s. Toxic HAB events caused by Karenia mikimotoi increased in frequency and spatial coverage in the 2010s, especially on the central Fujian coast. Increasing concentrations of dissolved inorganic nitrogen and dissolved inorganic phosphorus have been essential for increasing HAB occurrences since the 1980s. The combined effects of eutrophication and climate change have been suggested to be important reasons for long-term changes in HABs. Knowledge of the change patterns in and the mechanisms of HABs gained in this study will extend the current understanding of HABs along the Fujian coast and support future studies on HAB monitoring, early warning, prevention, and management.

Monitoring and control methods of harmful algal blooms in Chinese freshwater system: a review

Harmful algal blooms (HABs) are a worldwide problem with substantial adverse effects on the aquatic environment as well as human health, which have prompted researchers to study measures to stem and control them. Meanwhile, it is key to research and develop monitoring methods to establish early warning HABs. However, both the current monitoring methods and control methods have some shortcomings, making the field application limited. Thus, we need to improve current approaches for monitoring and controlling HABs efficiently. Based on the freshwater system features in China, we review various monitoring and control methods of HABs, summarize and discuss the problems with these methods, and propose the future development direction of monitoring and control HABs. Finally, we envision that it can combine physical, chemical, and biological methods to inhibit HAB expansion in the future, complementing each other with advantages. Further, we promise to establish a long-term strategy of controlling HABs with various algicidal bacteria co-cultivate for field applications in China. Efforts in studying algicidal bacteria must be increased to better control HABs and mitigate the risks of aquatic ecosystems and human health in China.

A Simple Model for a Fast Forewarning System of Brown Tide in the Coastal Waters of Qinhuangdao in the Bohai Sea, China

Qinhuangdao, a famous coastal resort city in northeastern China, has been affected by the rapid growth of harmful algae. The brown tide induced by Aureococcus anophagefferens (A. anophagefferens) first occurred along Qinhuangdao’s coastline in 2009, and it then developed into a harmful alga for the Bohai Sea. Based on MIKE 21, we construct a 2D coupled hydrodynamic and transport model to study the variation and distribution of total nitrogen (TN), and establish the relationship between A. anophagefferens, dissolved organic nitrogen (DON), and TN to provide a fast forewarning system for brown tide in Qinhuangdao. This model considers the decay, diffusion, and settling of TN, and the model results are in good agreement with the measured tidal level, current, and TN, indicating that the model is capable of capturing the observed TN distribution during the brown tide period. The transfer function relating TN to A. anophagefferens leads to a reliable fast forewarning and monitoring system. Moreover, the transferred A. anophagefferens cell density can be used to forecast the regional risk level of brown tide with a specific color indicator. The implementation of national policy relating to marine ecosystems decreases the nearshore concentration of N, P, and other nutrients, and therefore decreases harmful algal blooms. The fast routine assessment of brown tide by the present warning system provides robust guidance for the government to take action.

Transcriptome profiles of genes related to growth and virulence potential in Vibrio alginolyticus treated with modified clay

Vibrio alginolyticus is a globally distributed opportunistic pathogen that causes different degrees of disease in various marine organisms, such as fish, shrimp and shellfish. At present, vibriosis caused by V. alginolyticus has a wide epidemic range and causes frequent outbreaks, resulting in substantial losses in aquaculture. According to previous studies, modified clay (MC) could effectively flocculate and reduce the density of Vibrio in water, but it is still unknown whether MC inhibits growth and how it affects virulence in bottom flocs. Here, we studied the response mechanism of V. alginolyticus in flocs treated with MC at the transcriptome level and verified the transcriptomic data combined with relevant physiological experiments and reverse transcription quantitative real-time PCR (RT-qPCR) for the first time. It was found that the morphology of Vibrio in the MC flocs changed, the membrane function was damaged, the antioxidant system was activated, and the material and energy metabolism also changed. In addition, MC could inhibit the expression of virulence factors of V. alginolyticus; for example, flagella, pilus, siderophores, quorum sensing, and other related genes were significantly downregulated. In general, MC effectively inhibited the growth of Vibrio and reduced its virulence potential in flocs, which could provide theoretical support for a new model of healthy aquaculture.

Linear Six-Carbon Sugar Alcohols Induce Lysis of Microcystis aeruginosa NIES-298 Cells

Cyanobacterial blooms are a global concern due to their adverse effects on water quality and human health. Therefore, we examined the effects of various compounds on Microcystis aeruginosa growth. We found that Microcystis aeruginosa NIES-298 cells were lysed rapidly by linear six-carbon sugar alcohols including mannitol, galactitol, iditol, fucitol, and sorbitol, but not by other sugar alcohols. Microscopic observations revealed that mannitol treatment induced crumpled inner membrane, an increase in periplasmic space, uneven cell surface with outer membrane vesicles, disruption of membrane structures, release of intracellular matter including chlorophylls, and eventual cell lysis in strain NIES-298, which differed from the previously proposed cell death modes. Mannitol metabolism, antioxidant-mediated protection of mannitol-induced cell lysis by, and caspase-3 induction in strain NIES-298 were not observed, suggesting that mannitol may not cause organic matter accumulation, oxidative stress, and programmed cell death in M. aeruginosa. No significant transcriptional expression was induced in strain NIES-298 by mannitol treatment, indicating that cell lysis is not induced through transcriptional responses. Mannitol-induced cell lysis may be specific to strain NIES-298 and target a specific component of strain NIES-298. This study will provide a basis for controlling M. aeruginosa growth specifically by non-toxic substances.

Intense blooms of Phaeocystis globosa in the South China Sea are caused by a unique "giant-colony" ecotype

The haptophyte Phaeocystis globosa, an important causative agent of harmful algal blooms globally, exhibits varying morphological and physiological features and high genetic diversity, yet the relationship among these has never been elucidated. In this study, colony sizes and pigment profiles of 19 P. globosa isolates from the Pacific and Atlantic Oceans were determined. Genetic divergence of these strains was analyzed using the chloroplast rbcS-rpl27 intergenic spacer, a novel high-resolution molecular marker. Strains could be divided into four genetic clades based on these sequences, or two groups based on colony size and the identity of diagnostic pigments (19'-hexanoyloxyfucoxanthin, hex-fuco, and 19'-butanoyloxyfucoxanthin, but-fuco). Three strains from the South China Sea (SCS), all belonging to the same genetic clade, have unique biological features in forming giant colonies and possessing but-fuco as their diagnostic pigment. Based on these findings, we propose that these SCS strains should be a unique "giant-colony" ecotype of P. globosa. During the period 2016-2021, more than 1000 rbcS-rpl27 sequences were obtained from 16 P. globosa colony samples and 18 phytoplankton samples containing solitary P. globosa cells in the SCS. Phylogenetic analysis indicated that >95% of the sequences from P. globosa colonies in the SCS were comprised of the "giant-colony" ecotype, whereas the genetic diversity of solitary cells was much higher. Results demonstrated that intense blooms of P. globosa featuring giant colonies in the SCS were mainly caused by this giant-colony P. globosa ecotype.

Impacts of the Floc and Sink technique on the phytoplankton community: A morpho-functional approach in eutrophic reservoir water

The Floc and Sink technique promotes, through the application of coagulants and clays, the removal of phosphorus and algal biomass from the water column by flocculation and sedimentation. Although it is a promising technique for mitigating harmful cyanobacterial blooms, little is known about the impacts on other phytoplankton species as well as it is not known how species with mechanisms of resistance to sedimentation respond to the application of these products. In this study, a laboratory experiment was carried out with water from a eutrophic reservoir to assess the impact of applying aluminum-based coagulants, aluminum sulfate and polyaluminium chloride, and chitosan, alone and combined with lanthanum modified bentonite and natural bentonite on the phytoplankton community, in a functional approach based on morphology (Morphology-Based Functional Groups - MBFG, Kruk et al., 2010 and Reynolds et al., 2014), with an emphasis on the characteristics that provide resistance to sedimentation. We tested two hypotheses: phytoplankton species with adaptive mechanisms that provide buoyancy to cells are more resistant to the removal from the water column by coagulants and clays; and coagulants based on metals and modified clays are more efficient in sedimentation of microalgal cells compared to natural products, regardless of the presence of an adaptive mechanism of resistance to sedimentation. Our results showed that aluminum sulfate and polyaluminium chloride alone or combined with lanthanum modified bentonite and natural bentonite effectively sedimented the cells, regardless of the presence of buoyancy mechanisms. In contrast, the natural coagulant chitosan alone or combined with lanthanum modified bentonite and natural bentonite removed only those species that were small-celled or small colonial without specialized structures or with the presence of spines, arms and siliceous exoskeleton. In the case of species with aerotopes and flagella, the removal was not effective and still caused an increase in algal biomass due to the formation of suspended cell aggregates on the surface of the water column of the experimental units. Therefore, we concluded that the Floc and Sink technique has an impact on the phytoplankton community because it removes from the water column species that are not the target of coagulants and clays, but that are considered important sources of energy in freshwater trophic webs. This result differs according to the type of product used as well as it is related to the morphological adaptations that favor the buoyancy of cells in the water column. Species with aerotopes and flagella are more resistant to sedimentation and may make the use of products applied in the Floc and Sink technique unfeasible. Nevertheless, these results represent only an immediate effect of the technique on the phytoplankton community, thus requiring a longer time scale evaluation to determine the algae that can effectively recover water column. Therefore, we also emphasize that algae of nutritional value can recover over time and make the long-term application of the technique acceptable.

Algicidal Bacteria: A Review of Current Knowledge and Applications to Control Harmful Algal Blooms

Interactions between bacteria and phytoplankton in aqueous ecosystems are both complex and dynamic, with associations that range from mutualism to parasitism. This review focuses on algicidal interactions, in which bacteria are capable of controlling algal growth through physical association or the production of algicidal compounds. While there is some evidence for bacterial control of algal growth in the field, our understanding of these interactions is largely based on laboratory culture experiments. Here, the range of these algicidal interactions is discussed, including specificity of bacterial control, mechanisms for activity, and insights into the chemical and biochemical analysis of these interactions. The development of algicidal bacteria or compounds derived from bacteria for control of harmful algal blooms is reviewed with a focus on environmentally friendly or sustainable methods of application. Potential avenues for future research and further development and application of bacterial algicides for the control of algal blooms are presented.

Isolation and characterization of an algicidal bacterium against the bloom-forming algae raphidophyte Heterosigma akashiwo

Harmful algae blooms (HABs) have increased in intensity and frequency worldwide, causing negative effects on public health and marine ecosystems. This study isolated and identified the bloom causing species and its associated algicidal bacterium during a phytoplankton bloom in coastal waters of Lianyungang, China. Morphological observations and DNA barcoding analysis indicate that the studied phytoplankton bloom was caused by the raphidophyte Heterosigma akashiwo, and the algicidal bacterium, strain LD-B1, was identified as a species belonging to the genus Pseudoalteromonas. Furthermore, the algicidal effects of strain LD-B1 against H. akashiwo were characterized; revealing strain LD-B1 show strong algicidal activity against H. akashiwo. After 48 h of bacterium culture addition, the algicidal rate reached up to 98.8% with a 1% final volume rate. Moreover, our findings indicate strain LD-B1's extracellular compounds involved in algicidal activity are likely not proteinaceous. These findings indicate that the isolated strain, LD-B1, is a promising algicidal bacterium to control H. akashiwo blooms.

Post-ecological effect and risk assessment of using modified clay in harmful algal bloom mitigation: An attempt based on the responses of zooplankton Brachionus plicatilis and bivalve Mytilus edulis

The modified clay is the only worldwide-accepted practical method for mitigating algal bloom. Is it ecologically safe? To evidence it, a simulative bloom-occurring system of Karenia mikimotoi was set up, and the sentinel organisms of rotifer Brachionus plicatilis in sea surface and blue mussel Mytilus edulis on the benthos were respectively included. The organisms' physiological responses were determined as the indicators to reflect the ecological impacts when clay settled from surface to the bottom during the mimic bloom-mitigating process. Modified clay at a concentration of 0.1 g/L effectively removed the K. mikimotoi at an 81% removal rate, and its addition would not significantly strengthen the negative impacts on population dynamics and reproductive activities of B. plicatilis induced by sole K. mikimotoi within the first 2 h. Even an alleviation was observed at 2 d indicated by the increase of survival rate, egg and larva production after clay addition compared with those of 2 h. When the clay particles settled to benthos, the physical damage to the gills and digestive glands of M. edulis were found via the tissue and SEM observation, especially in higher treatment groups of 0.5 and 1.0 g/L, and filtering rate, digestive enzymes, condition index, water content and mortality were also influenced. However, little impact was found in group of 0.1 g/L. Risk assessment based on the adverse outcome pathway (AOP) model further revealed that the complete key event-key event relationship-adverse outcome pathway was only clearly observed in 0.5 g/L and 1 g/L groups but not in 0.1 g/L group, inferring the small ecological risk of 0.1 g/L. The integrated biomarker response (IBR) based on the mussel's physiological responses further backed up the AOP outcoming. The combined results from rotifer to bivalve emphasized on one conclusion that modified clay at 0.1 g/L was effective and ecologically safe in coastal bloom mitigation.

Pigment characterization of the giant colony-forming haptophyte Phaeocystis globosa in the Beibu Gulf reveals blooms of different origins

The giant colony-forming haptophyte Phaeocystis globosa has caused several large-scale blooms in the Beibu Gulf since 2011, but the distribution and dynamics of the blooms remained largely unknown. In this study, colonies of P. globosa, as well as membrane-concentrated phytoplankton samples, were collected during eight cruises from September 2016 to August 2017 in the Beibu Gulf. Pigments were analyzed by high performance liquid chromatography coupled with a diode-array detector (HPLC-DAD). The pigment 19'-hexanoyloxyfucoxanthin (hex-fuco), generally considered as a diagnostic pigment for Phaeocystis, was not detected in P. globosa colonies in Beibu Gulf, whereas 19'-butanoyloxyfucoxanthin (but-fuco) was found in all colony samples. Moreover, but-fuco in membrane-concentrated phytoplankton samples exhibited a similar distribution pattern to that of P. globosa colonies, suggesting that but-fuco provided the diagnostic pigment for bloom-forming P. globosa in the Beibu Gulf. Based on the distribution of but-fuco in different water masses in the region prior to the formation of intensive blooms, it's suggested that P. globosa blooms in the Beibu Gulf could originate from two different sources. IMPORTANCE Phaeocystis globosa has formed intensive blooms in the South China Sea and even around the world, causing huge social economic losses and environmental damage. However, little is known about the formation mechanism and dynamics of P. globosa blooms. 19'-hexanoyloxyfucoxanthin (hex-fuco) is often used as the pigment proxy to estimate Phaeocystis biomass, while this is challenged by the giant colony-forming P. globosa in the Beibu Gulf which only containing 19'-butanoyloxyfucoxanthin (but-fuco) but not hex-fuco. Using but-fuco as a diagnostic pigment, we traced two different origins of P. globosa bloom in Beibu Gulf. This study clarified the development process of P. globosa blooms in the Beibu Gulf, which provided a basis for the early monitoring and prevention of the bloom.

Effects of soluble organics on the settling rate of modified clay and development of improved clay formulations for harmful algal bloom control

For many years, the dispersal of modified clay (MC) has been used to control harmful algal blooms (HABs) in coastal waters of China. MC flocculation efficiency can be influenced by many factors in variable and complex natural environments, including high concentrations of dissolved organic matter (DOM) in the water to be treated. Since many HABs occur in nearshore waters where DOM concentrations are high, this is a significant problem that requires urgent attention. This study involved the use of humic acid as a representative form of DOM to study the influence of organic matter on the MC flocculation process. At high concentrations, humic acid was adsorbed onto MC particles, resulting in a decrease in surface potential and an increase in electrostatic repulsion between the clay particles; this decreased the MC settling rate and increased the water clarification time. Flocs were characterized by their relatively small particle size, high particle concentration, and low collision efficiency, which together resulted in slow clarification of the water after MC spraying. Based on the mechanism of the DOM-MC interaction and combined with the Derjaguin-Landau-Verwey-Overbeek theory and theoretical considerations of clay surface modification, the "ionic atmosphere compression" method was used to improve MC flocculation efficiency in high-organic water. This method increased the ionic strength of the clay stock solution by adding salt, thereby compressing the ionic atmosphere of MC particles and lowering the potential barrier, allowing the MC particles in the treated water to flocculate rapidly and form large flocs, followed by further floc growth and rapid settling via differential sedimentation. The settling rate of MCs improved by a factor of two and the removal efficiency of the HAB cells increased by 7-28%. This study provides important baseline information that will extend the application of MC to HAB control in water bodies with high organic loadings.

Healthier Communities of Phytoplankton and Bacteria Achieved via the Application of Modified Clay in Shrimp Aquaculture Ponds

The composition and stability of microbial communities in aquaculture water are crucial for the healthy growth of shrimp and present considerable risk to aquatic ecosystems. The modified clay (MC) method has been proposed as an efficient and safe solution for the mitigation of harmful algal blooms (HABs). Currently, the effects of MC on microbial communities in aquaculture water remain unknown. Here, we adopted the MC method to regulate shrimp-culture water quality and evaluated the effects of MC on the composition and stability of phytoplankton together with bacteria communities through high-throughput sequencing. On the one hand, a prominent change in the composition of microbial community was observed, with green algae becoming the most abundant genera and pathogens being infrequent in the MC-treated pond, which was more conducive to the growth of shrimp than that in the control pond. Moreover, MC could increase the diversity and stability of the microbial community structure in the water column, which had a higher anti-interference ability, as demonstrated by the analysis of the diversity and molecular ecological network. Taken together, MC could reduce the possibility for the occurrence of HABs and maintain a stable microbial community, which is beneficial for the health and high yield of shrimp.

Programmed cell death induced by modified clay in controlling Prorocentrum donghaiense bloom

Modified clay (MC), an effective material used for the emergency elimination of algal blooms, can rapidly reduce the biomass of harmful algal blooms (HABs) via flocculation. After that, MC can still control bloom population through indirect effects such as oxidative stress, which was initially proposed to be related to programmed cell death (PCD) at molecular level. To further study the MC induced cell death in residual bloom organisms, especially identifying PCD process, we studied the physiological state of the residual Prorocentrum donghaiense. The experimental results showed that flocculation changed the physiological state of the residual cells, as evidenced by growth inhibition and increased reactive oxygen species production. Moreover, this research provides biochemical and ultrastructural evidence showing that MC induces PCD in P. donghaiense. Nuclear changes were observed, and increased caspase-like activity, externalization of phosphatidylserine and DNA fragmentation were detected in MC-treated groups and quantified. And the mitochondrial apoptosis pathway was activated in both MC-treated groups. Besides, the features of MC-induced PCD in a unicellular organism were summarized and its concentration dependent manner was proved. All our preliminary results elucidate the mechanism through which MC can further control HABs by inducing PCD and suggest a promising application of PCD in bloom control.

Mechanism by Which MC Controls Harmful Algal Blooms Revealed by Cell Morphology of Aureococcus anophagefferens

On the basis of field experience, a bloom does not continue after treatment with modified clay (MC), even though the residual harmful algal bloom (HAB) biomass accounts for 20–30% of the initial cells. This interesting phenomenon indicates that, in addition to causing flocculation, MC can inhibit the growth of residual cells. Here, from a cell morphology perspective, Aureococcus anophagefferens was used as a model organism to explore this scientific issue and clarify the mechanism by which MC mitigates harmful algal blooms (HABs). The results showed that, at an ~70% removal efficiency, neutral clay (NC) could not effectively inhibit the growth of residual cells, although it caused various forms of damage to residual cells, such as cell deformation, cell breakage, decreased extracellular polysaccharides (EPS), increased cell membrane permeability, and increased cytoplasmic granularity, due to physical collisions. After modification, some physical and chemical properties of the clay particle surface were changed; for example, the surface electrical properties changed from negative to positive, lamellar spacing increased, hardness decreased, adhesion chains increased, adhesion improved, and the number of absorption sites increased, enhancing the occurrence of chemical and electrochemical effects and physical collisions with residual cells, leading to severe cell deformation and chemical cell breakage. Thus, MC effectively inhibited the growth of residual cells and controlled HABs.

Effects of Modified Clay on Phaeocystis globosa Growth and Colony Formation

Phaeocystis globosa is a globally distributed harmful algal blooms (HABs) species dominated by the colonial morphotype, which presents dramatic environmental hazards and poses a threat to human health. Modified clay (MC) can effectively flocculate HAB organisms and prevent their subsequent growth, but the effects of MC on colony-dominated P. globosa blooms remain uncertain. In this paper, a series of removal and incubation experiments were conducted to investigate the growth, colony formation and colony development of P. globosa cells after treatment with MC. The results show that the density of colonies was higher at MC concentrations below 0.2 g/L compared to those in the control, indicating the role of P. globosa colonies in resistance to environmental stress. Concentrations of MC greater than 0.2 g/L could reduce the density of solitary cells and colonies, and the colony diameter and extracellular polysaccharide (EPS) content were also decreased. The adsorption of MC to dissolved inorganic phosphorus (DIP) and the cell damage caused by collision may be the main mechanisms underlying this phenomenon. These results elucidate that the treatment with an appropriate concentration of MC may provide an effective mitigation strategy for P. globosa blooms by preventing their growth and colony formation.