Antibacterial efficacy of green synthesized α-Fe2O3 nanoparticles using Sida cordifolia plant extract

Biosynthesis of iron oxide nanoparticles using plant extracts and evaluation of their antibacterial activity

The biosynthesis of iron oxide nanoparticles has received increasing attention in the field of food nanotechnology because of their non-toxicity, high efficiency, high antibacterial power, and decontamination features. Therefore, biosynthesis of iron oxide nanoparticles (nFe) was prepared from the leaves of some vegetables, such as cabbage (C) and turnips (T), as well as moringa leaves (M). Alcoholic extracts of these nanoparticles were also tested on Staphylococcus aureus and Escherichia coli to evaluate their antibacterial activity. The results revealed that the particle sizes of the biosynthesis nanomaterials studied ranged from 12.99 to 22.72 nm, and the particles were spherical, irregular, and surrounded by black color. It also contains many functional groups and minerals. Iron nanoparticles modified with Moringa oleifera extract at a concentration of 200 ppm had the highest phenol content compared to other biosynthesis nanoparticles studied. TnFe and MnFe at 200 ppm had a maximum zone of inhibition of 25 mm and 24 mm against Staphylococcus aureus and Escherichia coli, respectively. While the minimum inhibition zone of 8.0 mm was observed at 25 ppm for nFe against Escherichia coli. Therefore, it is recommended to use these extracts of biosynthesis iron oxide nanoparticles as antibacterial agents for stored foods.

Influence of Physicochemical Properties of Iron Oxide Nanoparticles on Their Antibacterial Activity

The increasing occurrence of infectious diseases caused by antimicrobial resistance organisms urged the necessity to develop more potent, selective, and safe antimicrobial agents. The unique magnetic and tunable properties of iron oxide nanoparticles (IONPs) make them a promising candidate for different theragnostic applications, including antimicrobial agents. Though IONPs act as a nonspecific antimicrobial agent, their antimicrobial activities are directly or indirectly linked with their synthesis methods, synthesizing precursors, size, shapes, concentration, and surface modifications. Alteration of these parameters could accelerate or decelerate the production of reactive oxygen species (ROS). An increase in ROS role production disrupts bacterial cell walls, cell membranes, alters major biomolecules (e.g., lipids, proteins, nucleic acids), and affects metabolic processes (e.g., Krebs cycle, fatty acid synthesis, ATP synthesis, glycolysis, and mitophagy). In this review, we will investigate the antibacterial activity of bare and surface-modified IONPs and the influence of physiochemical parameters on their antibacterial activity. Additionally, we will report the potential mechanism of IONPs' action in driving this antimicrobial activity.

Sida cordifolia L. attenuates behavioral hypersensitivity by interfering with KIF17-NR2B signaling in rat model of neuropathic pain

ETHNOPHARMACOLOGICAL RELEVANCE

Sida cordifolia L., a perennial subshrub belonging to the Malvaceae family, holds noteworthy significance in the Indian Ayurvedic System and global texts. Roots of this plant are reported to be useful in neurodegenerative disorders, facial paralysis, and treating several neuropathic pain conditions such as neuralgia, and sciatica. However, despite these claims, there remains a dearth of experimental evidence showcasing the effectiveness of Sida cordifolia L. roots in mitigating neuropathic pain.

AIM OF THE STUDY

The primary objective of this study was to assess the analgesic properties of the whole extract (SCE) obtained from the roots of Sida cordifolia L., as well as its aqueous fraction (SAF) in rat model of chronic constriction injury (CCI)-induced neuropathic pain. Furthermore, in-depth phytochemical and molecular biology studies were conducted to identify the potential phytoconstituents and unveil the underlying mechanisms of action.

MATERIAL AND METHODS

DCM: Methanol (1:1) was used to extract the roots of Sida cordifolia L. to get whole extract (SCE) and was subjected to phytochemical investigations including LC-MS analysis. Analgesic potential of SCE was evaluated in chronic constriction injury (CCI) model of neuropathic pain in rats followed by its bioactivity guided fractionation using in-vitro anti-inflammatory assay and assessment of most potent fraction (SAF) in in-vivo pain model. We have also performed the detailed phytochemical and molecular biology investigations to delineate the mechanism of action of Sida cordifolia root extract.

RESULTS

Chronic constriction injury leads to significant decrease in paw withdrawal threshold and paw withdrawal latency indicating development of hypersensitivity in rodents. Treatment with SCE and its most potent aqueous fraction (SAF) leads to significant and dose-dependent reduction in pain-like behavior of nerve injured rats. Pro-inflammatory cytokines (TNF-α, IL-1β), glia cell markers (Iba1, ICAM1), neuropeptides (CGRP and Substance P), KIF-17 and NR2B expressions were found to be significantly upregulated in DRG and spinal cord of nerve injured rats. Treatment with SCE and SAF suppressed oxido-inflammatory cascade along with attenuation of KIF-17 mediated NR2B trafficking and neuroinflammation in DRG and spinal tissues of neuropathic rats. HPTLC and HR-MS analysis suggest betaine as major constituent in SAF which along with other phytoconstituents.

CONCLUSIONS

Both the whole extract (SCE) and the aqueous fraction (SAF) demonstrate a significant reduction in mechanical and thermal hypersensitivity by inhibiting KIF-17 mediated NR2B signaling in nerve injured rats and may be used as a potential alternative for the treatment of chronic pain. Our findings support the use of roots of Sida cordifolia L. in neuropathic pain conditions as acclaimed by its traditional use.

Sida cordifolia L.: Ethnobotany, Phytochemistry, Phytonanotechnology, and Commercial Application

BACKGROUND

After a period of prolonged indifference, where synthetic drugs were preferred, interest in the biological aspects and bioactive ingredients of plants accountable for therapeutic potential has been explored eminently. Sida cordifolia L. is a perennial herb that has been widely utilized in Indian (Ayurveda, Unani, and Siddha), American, and Chinese folk medicine and herbalism practice for curing a wide range of ailments in human beings.

OBJECTIVES

The goal of this review is to elucidate indigenous knowledge parallelly with the pharmacotherapeutics potential of Sida cordifolia L. against various diseases. It is also intended to display pertinent information related to nanoparticle profiling.

METHODS

In the current comprehensive study, web-based searches were performed by using several databases, such as Google Scholar, PubMed, ResearchGate, Science Direct, and Scopus, to figure out relevant research work and data published in academic journals from 1930 to July, 2023 using single or combination of keywords listed herewith.

RESULTS

More than 50 chemical constituents, including quinazoline and phenethylamine alkaloids, flavones, flavonol, phytosterol, fatty acids, etc., were reported to be found in different parts of healthy plants. Apart from traditional claims and pharmacological aspects, several marketed herbal formulations and granted patents were also described.

CONCLUSION

Several in-vitro and in-vivo studies validated the usage of S. cordifolia as antiinflammatory, antibacterial, antifungal, antiprotozoal, anthelmintic, anticancer, antiulcer, cardioprotective, hypoglycemic, etc. agent. Few patents are also related to S. cordifolia, and more research work needs to be carried out for its potential granted to use as an antiviral agent and other new drug discovery molecules.

Iron Oxide Nanoparticles: Green Synthesis and Their Antimicrobial Activity

The rise of antimicrobial resistance caused by inappropriate use of these agents in various settings has become a global health threat. Nanotechnology offers the potential for the synthesis of nanoparticles (NPs) with antimicrobial activity, such as iron oxide nanoparticles (IONPs). The use of IONPs is a promising way to overcome antimicrobial resistance or pathogenicity because of their ability to interact with several biological molecules and to inhibit microbial growth. In this review, we outline the pivotal findings over the past decade concerning methods for the green synthesis of IONPs using bacteria, fungi, plants, and organic waste. Subsequently, we delve into the primary challenges encountered in green synthesis utilizing diverse organisms and organic materials. Furthermore, we compile the most common methods employed for the characterization of these IONPs. To conclude, we highlight the applications of these IONPs as promising antibacterial, antifungal, antiparasitic, and antiviral agents.

Chitosan Nanoparticles for Enhanced Delivery of Sida cordifolia Extract: Formulation, Optimization and Bioactivity Assessment

In a continuous search for an essential antidiabetic agent, Sida cordifolia hydroalcoholic (SCHA) extract-loaded chitosan nanoparticles (SCHA-CS-NP) were optimized. The Box-Behnken design (BBD Design-Expert software, version 14) with three parameters was used to optimize the nanoparticles after creating them using the ion gelation method. The chitosan and Tween 20 contents and the stirring speed were chosen as the independent variables, and their separate and combined effects on particle size (Y1), polydispersity index (Y2) and entrapment efficiency (Y3) were observed. The optimized formulation showed a particle size of 51 nm, an entrapment efficiency of 84.54% and a polydispersity index of 0.391. Physicochemical characterization, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), a drug release study, an ex vivo permeation study, and an antioxidant study were performed. Confocal laser scanning microscopy (CLSM) images demonstrated that chitosan nanoparticles loaded with rhodamine B-laden SCHA extract had superior penetration compared to the control (rhodamine B solution). Furthermore, compared to conventional ascorbic acid (IC50 = 45 µg/mL), a superior antioxidant activity was discovered for SCHA-CS-NPs (IC50 = 86.45 ± 2.24 µg/mL), while SCHA-CS-NPs also exhibited strong antidiabetic potential (IC50 = 93.71 ± 1.79 µg/mL) compared to standard acarbose (IC50 = 97.25 ± 1.43 µg/mL). The overall results demonstrated that SCHA-CS-NPs are a promising and efficient formulation for oral delivery.

Current Advances in Nanotechnology-Mediated Delivery of Herbal and Plant-Derived Medicines

Phytomedicine has been used by humans since ancient times to treat a variety of diseases. However, herbal medicines face significant challenges, including poor water and lipid solubility and instability, which lead to low bioavailability and insufficient therapeutic efficacy. Recently, it has been shown that nanotechnology-based drug delivery systems are appropriate to overcome the above-mentioned limitations. The present review study first discusses herbal medicines and the challenges involved in the formulation of these drugs. The different types of nano-based drug delivery systems used in herbal delivery and their potential to improve therapeutic efficacy are summarized, and common techniques for preparing nanocarriers used in herbal drug delivery are also discussed. Finally, a list of nanophyto medicines that have entered clinical trials since 2010, as well as those that the FDA has approved, is presented.

Transition metal-based nanoparticles as potential antimicrobial agents: recent advancements, mechanistic, challenges, and future prospects

Bacterial transmission is considered one of the potential risks for communicable diseases, requiring promising antibiotics. Traditional drugs possess a limited spectrum of effectiveness, and their frequent administration reduces effectiveness and develops resistivity. In such a situation, we are left with the option of developing novel antibiotics with higher efficiency. In this regard, nanoparticles (NPs) may play a pivotal role in managing such medical situations due to their distinct physiochemical characteristics and impressive biocompatibility. Metallic NPs are found to possess extraordinary antibacterial effects that are useful in vitro as well as in vivo as self-modified therapeutic agents. Due to their wide range of antibacterial efficacy, they have potential therapeutic applications via diverse antibacterial routes. NPs not only restrict the development of bacterial resistance, but they also broaden the scope of antibacterial action without binding the bacterial cell directly to a particular receptor with promising effectiveness against both Gram-positive and Gram-negative microbes. This review aimed at exploring the most relevant types of metal NPs employed as antimicrobial agents, particularly those based on Mn, Fe, Co, Cu, and Zn metals, and their antimicrobial mechanisms. Further, the challenges and future prospects of NPs in biological applications are also discussed.

Efficient removal of methylene blue from water using magnetic Alyssum homolocarpum seed gum-based matrix

In this study, we fabricated magnetic Fe₃O₄ nanoparticles conjugated with anionic hydroxypropyl starch-graft-acrylic acid (Fe3O4@AHSG) for the efficient removal of methylene blue (MB) dye from aqueous solutions. The synthesized nanoconjugates were characterized using various techniques. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analysis revealed that the particles exhibited homogeneously distributed nanosized spherical shapes with a mean diameter of 41.72 ± 6.81 nm. The EDX analysis confirmed the absence of impurities, with the Fe₃O₄ particles comprising 64.76 % iron and 35.24 % atomic oxygen. Dynamic light scattering (DLS) measurements showed a monodisperse particle system with a mean hydrodynamic size of 135.4 nm (polydispersity index, PI = 0.530) for the Fe₃O₄ nanoparticles and 163.6 nm (PI = 0.498) for the Fe3O4@AHSG adsorbent. Vibrating sample magnetometer (VSM) analysis indicated superparamagnetic behavior for both Fe₃O₄ and Fe₃O₄@AHSG, with higher saturation magnetization (Ms) observed for Fe₃O₄. The dye adsorption studies demonstrated that the adsorbed dye capacity increased with increasing initial MB concentration and adsorbent dose. The pH of the dye solution significantly influenced the adsorption, with the highest adsorption observed at basic pH values. The presence of NaCl reduced the adsorption capacity due to increased ionic strength. Thermodynamic analysis indicated the thermodynamically favorable and spontaneous nature of the adsorption process. Kinetic studies revealed that the pseudo-second-order model provided the best fit to the experimental data, suggesting chemisorption as the rate-limiting step. Overall, Fe₃O₄@AHSG nanoconjugates exhibited excellent adsorption capacity and could be a promising material for effective removal of MB dye from wastewater.

Biomonitoring and risk assessment of naturally and chemically synthesized iron-oxide nanoparticles: A comparative approach

Nanostructured oxides and oxyhydroxides of iron are imperative constituents of the Earth's geological and biological processes i.e. biogeochemical cycles. So, the characteristic applications of iron oxide nanoparticles (FeONps) are closely linked to their surroundings and biological sinks. This work reports a low-cost green approach to promote 'waste-to-wealth' ideology by the direct and self-catalysis of iron rust into its nanoparticles (N-FeONps). A comparison is drawn based on the properties, morphologies, and applications after synthesizing FeONps by chemical precipitation method (C-FeONps). Spherical nanoparticles with vibrational properties are obtained in the size domain of 32 nm (N-FeONps) and 23 nm (C-FeONps). The application of Uniform deformation model, Uniform stress deformation model, Uniform deformation energy density model, and Size-strain plot models reveal comparatively greater defects in the crystal structures of C-FeONps. The biosafety profiling of natural and chemically designed nano-units performed on the species of bacteria, fungus, algae, and plants have shown enhanced safety terms associated with N-FeONps. The performance of N-FeONps has surpassed its chemical counterpart in medical applications such as antioxidant activity and anti-inflammatory activity with approximate percentages of 26 % and 51 % respectively. The findings of this piece of work favors the naturally obtained FeONps (N-FeONps), as they are economically viable, non-toxic, and have a greater antioxidant and anti-inflammatory arena. Hence, this waste-to-wealth ideology should be promoted for maintaining waste and designing solutions for the medical industries in one go.

Biofabrication of Fe3O4 Nanoparticles from Spirogyra hyalina and Ajuga bracteosa and Their Antibacterial Applications

Iron oxide nanoparticles (NPs) have attracted substantial interest due to their superparamagnetic features, biocompatibility, and nontoxicity. The latest progress in the biological production of Fe₃O₄ NPs by green methods has improved their quality and biological applications significantly. In this study, the fabrication of iron oxide NPs from Spirogyra hyalina and Ajuga bracteosa was conducted via an easy, environmentally friendly, and cost-effective process. The fabricated Fe₃O₄ NPs were characterized using various analytical methods to study their unique properties. UV-Vis absorption peaks were observed in algal and plant-based Fe₃O₄ NPs at 289 nm and 306 nm, respectively. Fourier transform infrared (FTIR) spectroscopy analyzed diverse bioactive phytochemicals present in algal and plant extracts that functioned as stabilizing and capping agents in the fabrication of algal and plant-based Fe₃O₄ NPs. X-ray diffraction of NPs revealed the crystalline nature of both biofabricated Fe₃O₄ NPs and their small size. Scanning electron microscopy (SEM) revealed that algae and plant-based Fe₃O₄ NPs are spherical and rod-shaped, averaging 52 nm and 75 nm in size. Energy dispersive X-ray spectroscopy showed that the green-synthesized Fe₃O₄ NPs require a high mass percentage of iron and oxygen to ensure their synthesis. The fabricated plant-based Fe₃O₄ NPs exhibited stronger antioxidant properties than algal-based Fe₃O₄ NPs. The algal-based NPs showed efficient antibacterial potential against E. coli, while the plant-based Fe₃O₄ NPs displayed a higher zone of inhibition against S. aureus. Moreover, plant-based Fe₃O₄ NPs exhibited superior scavenging and antibacterial potential compared to the algal-based Fe₃O₄ NPs. This might be due to the greater number of phytochemicals in plants that surround the NPs during their green fabrication. Hence, the capping of bioactive agents over iron oxide NPs improves antibacterial applications.

Structural characterization of cuboidal α-Fe2O3 nanoparticles synthesized by a facile approach

α-Fe2O3 nanoparticles were synthesized using Tabebuia aurea leaf extract by a facile approach. The signature peaks for Fe and O in the EDX spectrum verified the formation of Fe2O3 nanoparticles. Cuboidal-shaped nanoparticles were observed in the FE-SEM image. In the XRD pattern, it was observed that the peaks belong to α-Fe2O3 nanoparticles. These particles were pure and crystalline with an average particle size of 25.69 nm. The signals at 538 and 494 cm−1 in the FTIR image confirmed the formation of hematite nanoparticles. BET analysis showed a comparatively greater surface area (31.03 m2/g) than the commercial α-Fe2O3 nanoparticles, and the pores were mesoporous. XPS analysis confirmed the existence of α-Fe2O3 by showing the specific oxidation states for iron and oxygen at 710.34 and 529.67 eV, respectively. The saturation magnetization value of 13.97 emu/g confirmed the superparamagnetic nature. The TGA, which determined the thermal stability of the nanoparticles, reported a total weight loss of 12.75%. Hence, the highly crystalline, pure, mesoporous, superparamagnetic α-Fe2O3 nanoparticles with high surface area synthesized using T. aurea leaf extract can be potentially applied in diverse fields.

Mechanochemical Synthesis of Nanoparticles for Potential Antimicrobial Applications

There is an increased interest in porous materials due to their unique properties such as high surface area, enhanced catalytic properties, and biological applications. Various solvent-based approaches have been already used to synthesize porous materials. However, the use of large volume of solvents, their toxicity, and time-consuming synthesis make this process less effective, at least in terms of principles of green chemistry. Mechanochemical synthesis is one of the effective eco-friendly alternatives to the conventional synthesis. It adopts the efficient mixing of reactants using ball milling without or with a very small volume of solvents, gives smaller size nanoparticles (NPs) and larger surface area, and facilitates their functionalization, which is highly beneficial for antimicrobial applications. A large variety of nanomaterials for different applications have already been synthesized by this method. This review emphasizes the comparison between the solvent-based and mechanochemical methods for the synthesis of mainly inorganic NPs for potential antimicrobial applications, although some metal-organic framework NPs are briefly presented too.

Biocatalysis as a Green Approach for Synthesis of Iron Nanoparticles—Batch and Microflow Process Comparison

There is a growing need for production of iron particles due to their possible use in numerous systems (e.g., electrical, magnetic, catalytic, biological and others). Although severe reaction conditions and heavy solvents are frequently used in production of nanoparticles, green synthesis has arisen as an eco-friendly method that uses biological catalysts. Various precursors are combined with biological material (such as enzymes, herbal extracts, biomass, bacteria or yeasts) that contain chemicals from the main or secondary metabolism that can function as catalysts for production of nanoparticles. In this work, batch (“one-pot”) biosynthesis of iron nanoparticles is reviewed, as well as the possibilities of using microfluidic systems for continuous biosynthesis of iron nanoparticles, which could overcome the limitations of batch synthesis.

Synthesis, biomedical applications, and toxicity of CuO nanoparticles

Versatile nature of copper oxide nanoparticles (CuO NPs) has made them an imperative nanomaterial being employed in nanomedicine. Various physical, chemical, and biological methodologies are in use for the preparation of CuO NPs. The physicochemical and biological properties of CuO NPs are primarily affected by their method of fabrication; therefore, selectivity of a synthetic technique is immensely important that makes these NPs appropriate for a specific biomedical application. The deliberate use of CuO NPs in biomedicine questions their biocompatible nature. For this reason, the present review has been designed to focus on the approaches employed for the synthesis of CuO NPs; their biomedical applications highlighting antimicrobial, anticancer, and antioxidant studies; and most importantly, the in vitro and in vivo toxicity associated with these NPs. This comprehensive overview of CuO NPs is unique and novel as it emphasizes on biomedical applications of CuO NPs along with its toxicological assessments which would be useful in providing core knowledge to researchers working in these domains for planning and conducting futuristic studies. KEY POINTS: • The recent methods for fabrication of CuO nanoparticles have been discussed with emphasis on green synthesis methods for different biomedical approaches. • Antibacterial, antioxidant, anticancer, antiparasitic, antidiabetic, and antiviral properties of CuO nanoparticles have been explained. • In vitro and in vivo toxicological studies of CuO nanoparticles exploited along with their respective mechanisms.

Antibacterial Pathways in Transition Metal-Based Nanocomposites: A Mechanistic Overview

Across the planet, outbreaks of bacterial illnesses pose major health risks and raise concerns. Photodynamic, photothermal, and metal ion release effects of transition metal-based nanocomposites (TMNs) were recently shown to be highly effective in reducing bacterial resistance and upsurges in outbreaks. Surface plasmonic resonance, photonics, crystal structures, and optical properties of TMNs have been used to regulate metal ion release, produce oxidative stress, and generate heat for bactericidal applications. The superior properties of TMNs provide a chance to investigate and improve their antimicrobial actions, perhaps leading to therapeutic interventions. In this review, we discuss three alternative antibacterial strategies based on TMNs of photodynamic therapy, photothermal therapy, and metal ion release and their mechanistic actions. The scientific community has made significant efforts to address the safety, effectiveness, toxicity, and biocompatibility of these metallic nanostructures; significant achievements and trends have been highlighted in this review. The combination of therapies together has borne significant results to counter antimicrobial resistance (4-log reduction). These three antimicrobial pathways are separated into subcategories based on recent successes, highlighting potential needs and challenges in medical, environmental, and allied industries.

Green Synthesis of Α-Fe2O3 from Ginger Extract Enhanced the Potential Antioxidant Activity Against DPPH

Synthesis of nano-oxides in an easy and environmentally friendly way using simple and green materials is one of the hot interests of sustainable chemistry for lots of pharmaceutical and medical applications. Herein, we synthesized α-Fe2O3 nanoparticles (α-Fe2O3 NPs) using ginger extract after that calcination at 400 C° for 4 h. The prepared α-Fe2O3 nanoparticles were examined using ultraviolet-visible reflection spectroscopy (UV-VIS), Fourier Transform Infrared Spectroscopy (FTIR), photoluminescence spectroscopy (PL), X-ray diffraction (XRD), field emission scanning microscopy (FE-SEM), energy-dispersive X-ray (EDX) spectroscopy, and zeta potential. After well characterizations, the potency of the prepared α-Fe2O3 nanoparticles to monitor some scavenging activity was explored against DPPH. Results revealed that PL intensity has one peak in the UV region between (480-490) nm of the spectrum depending on the geometric shape and size of the α-Fe2O3 NPS. The UV-visible spectra showed a peak at 296.0 nm, which represented the α-Fe2O3 NPs. The EDX micrograph confirmed pure oxide and the XRD pattern showed that the α-Fe2O3 NPs had an average crystal size (19.3) nm. SEM images of α-Fe2O3 NPs revealed spherical, rod, and irregular shapes and sizes ranging from (15 to 60) nm. Moreover, the antioxidant activity of α-Fe2O3 NPs against DPPH showed 51.8% free radical scavenging ability at 360 μg/mL, which approved good evidence of the antioxidant activity of α-Fe2O3 NPs.

Antimicrobial Properties of CuO Particles Deposited on a Medical Mask

Medical face masks help to reduce the transmission of pathogens, however, the number of infections caused by antimicrobial-resistant pathogens continues to increase. The aim of this study was to investigate the antimicrobial effect of an experimental medical mask layer coated with copper oxide using an environmentally friendly non-thermal physical vapour deposition approach. Pure CuO nanoparticles were successfully deposited on the middle layer of a face mask. The particles were distributed in different size clusters (starting from less than 100 nm dots going up to about 1 µm cluster-like structures). The CuO clusters did not form uniform films, which could negatively influence airflow during use of the mask. We investigated the antimicrobial properties of the experimental mask layer coated with CuO NPs using 17 clinical and zoonotic strains of gram-negative, gram-positive, spore-forming bacteria and yeasts, during direct and indirect contact with the mask surface. The effectiveness of the coated mask layer depended on the deposition duration of CuO. The optimal time for deposition was 30 min, which ensured a bactericidal effect for both gram-positive and gram-negative bacteria, including antimicrobial-resistant strains, using 150 W power. The CuO NPs had little or no effect on Candida spp. yeasts.

In Situ Biosynthesis of Reduced Alpha Hematite (α-Fe2O3) Nanoparticles by Stevia Rebaudiana L. Leaf Extract: Insights into Antioxidant, Antimicrobial, and Anticancer Properties

In the present study, we utilized Stevia rebaudiana L. (SRLe) extract to in situ biosynthesize nanoscale alpha hematite (α-Fe₂O₃) nanoparticles (NPs) with potent antioxidant, antimicrobial, and anticancer properties. SRLe-α-Fe₂O₃ was characterized using physiochemical analyses, including UV/Vis, FTIR, XRD, DLS, EDX, SEM, and TEM studies. Among tested solvents, CHCl₃/MeOH (2:1 v/v) SRL extract (least polar solvent) contained the highest EY, TPC, and antioxidant capacity of ~3.5%, ~75 mg GAE/g extract, and IC₅₀ = 9.87 ± 0.7 mg/mL, respectively. FTIR confirmed the engagement of coating operation to the colloidal α-Fe₂O₃ NPs. TEM, SEM, and DLS revealed that SRLe-α-Fe₂O₃ has a spherical shape, uniform size distribution with aggregation for an average size of ~18.34 nm, and ζ = −19.4 mV, forming a repulsive barrier that helped to improve stability. The synthesized nanoparticles displayed considerable antibacterial activity against E. coli and S. aureus bacterial growth, and exhibited superior activity against the A549 lung cancer cell lines. These findings indicate that the increased availability of bioactive substances with antioxidant properties of SRLe makes it a potentially interesting material for the preparation of biologically active compounds and green synthesis of nanoparticles.

Mycosynthesis of Hematite (α-Fe2O3) Nanoparticles Using Aspergillus niger and Their Antimicrobial and Photocatalytic Activities

Nanoparticles (NPs) and nanomaterials (NMs) are now widely used in a variety of applications, including medicine, solar energy, drug delivery, water treatment, and pollution detection. Hematite (α-Fe2O3) nanoparticles (Hem-NPs) were manufactured in this work by utilizing a cost-effective and ecofriendly approach that included a biomass filtrate of A. niger AH1 as a bio-reducer. The structural and optical properties of Hem-NPs were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV-visible and Fourier-transform infrared (FTIR) spectroscopies. The results revealed that all of the studied parameters, as well as their interactions, had a significant impact on the crystallite size. The average diameter size of the biosynthesized Hem-NPs ranged between 60 and 80 nm. The antimicrobial and photocatalytic activities of Hem-NPs were investigated. The antimicrobial results of Hem-NPs revealed that Hem-NPs exhibited antibacterial activity against E. coli, B. subtilis, and S. mutans with MICs of 125, 31.25, and 15.62 µg/mL, respectively. Moreover, Hem-NPs exhibited antifungal activity against C. albicans and A. fumigatus, where the MICs were 2000 and 62.5 µg/mL, respectively. The efficiency of biosynthesized Hem-NPs was determined for the rapid biodegradation of crystal violet (CV) dye, reaching up to 97 percent after 150 min. Furthermore, Hem-NPs were successfully used more than once for biodegradation and that was regarded as its efficacy. In conclusion, Hem-NPs were successfully biosynthesized using A. niger AH1 and demonstrated both antimicrobial activity and photocatalytic activity against CV dye.

Cefotaxime removal enhancement via bio-nanophotocatalyst α-Fe2O3 using photocatalytic degradation technique and its echo-biomedical applications

The present paper evaluates the photocatalytic degradation (PCD) performance of the biofabricated hematite nanoparticles (α-HNPs) for the degradation approach of the Cefotaxime (Cfm). The optimum pH of the solution to achieve the best PCD was found to be 10.5. The kinetics study for the PCD of the Cfm via α-HNPs has been investigated and the reaction was found to be fellow pseudo-first-order at R² = 0.992. The mass loading impact of α-HNPs was investigated and estimated for the maximum degradation of Cfm 0.4 mg/mL. UV–Vis confirmed that α-HNPs had a direct transition bandgap at 3.78 eV at a maximum absorption wavelength of 362 nm with suspension stability for 7 days. The probable mechanism of the Cfm PCD via α-HNPs and the degradation pathway was conducted. The validation of the suspension stability of the α-HNPs (−68.6 ± 11.8 mV) was determined using the zeta potential investigation test. XRD investigation was conducted after Cfm PCD showing an average crystallite size of 27.0 nm. XRD, TEM, SEM, EDX, and FT-IR analyses have been conducted for the α-HNPs before and after Cfm PCD confirming the high efficiency for the reusability of the current biocatalyst α-HNPs for further use. TEM results of the particle sizes of α-HNPs were found at 19.2 ± 4.4 and 20.6 ± 7.4 nm respectively before and after Cfm PCD. The efficiency of the Cfm PCD was found to be 99.1% after 6 h. High potent as an antibacterial agent of α-HNPs was investigated either α-HNPs alone or after its PCD activity against Cfm. The antibacterial activity revealed high sensitivity, especially toward Gram-positive species indicating its promising ability against pathogenic issues. Interestingly, Cfm@α-HNPs showed superior anti-proliferative activity as tested by MTT assay and were able to induce apoptosis in MCF7 and HepG2 cell lines using the flow cytometry technique at 20.7% and 17% respectively. Also, The IC₅₀ of hydrogen peroxide scavenging was estimated and it was manifested that 635.8 and 665.6 μg/mL of α-HNPs before and after the PCD process of Cfm respectively.

Biosynthesis of Iron Oxide Nanoparticles: Physico-Chemical Characterization and Their In Vitro Cytotoxicity on Healthy and Tumorigenic Cell Lines

Iron oxide nanoparticles were synthesized starting from two aqueous extracts based on Artemisia absinthium L. leaf and stems, employing a simplest, eco-friendliness and low toxicity method—green synthesis. The nanoparticles were characterized by powder X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), X-ray fluorescence analysis (XRF), thermal analysis (TG/DSC), and scanning electron microscopy (SEM). Lack of magnetic properties and the reddish-brown color of all the samples confirms the presence of hematite as majority phase. The FTIR bands located at 435 cm⁻¹ and 590 cm⁻¹, are assigned to Fe-O stretching vibration from hematite, confirming the formation of α-Fe₂O₃ nanoparticles (NPs). The in vitro screening of the samples revealed that the healthy cell line (HaCaT) presents a good viability (above 80%) after exposure to iron oxide NPs and lack of apoptotic features, while the tumorigenic cell lines manifested a higher sensitivity, especially the melanoma cells (A375) when exposed to concentration of 500 µg/mL iron oxide NPs for 72 h. Moreover, A375 cells elicited significant apoptotic markers under these parameters (concentration of 500 µg/mL iron oxide NPs for a contact time of 72 h).

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Iron Oxide Nanoparticles-Plant Insignia Synthesis with Favorable Biomedical Activities and Less Toxicity, in the “Era of the-Green”: A Systematic Review

In the era of favoring environment-friendly approaches for pharmaceutical synthesis, “green synthesis” is expanding. Green-based nanomedicine (NM), being less toxic and if having biomedical acceptable activities, thence, the chemical methods of synthesis are to be replaced by plants for reductive synthesis. Iron oxide nanoparticles (IONPs) exhibited remarkable anti-microbial and anti-cancer properties, besides being a drug delivery tool. However, owing to limitations related to the chemical synthetic method, plant-mediated green synthesis has been recognized as a promising alternative synthetic method. This systematic review (SR) is addressing plant-based IONPs green synthesis, characteristics, and toxicity studies as well as their potential biomedical applications. Furthermore, the plant-based green-synthesized IONPs in comparison to nanoparticles (NPs) synthesized via other conventional methods, characteristics, and efficacy or toxicity profiles would be mentioned (if available). Search strategy design utilized electronic databases including Science Direct, PubMed, and Google Scholar search. Selection criteria included recent clinical studies, available in the English language, published till PROSPERO registration. After screening articles obtained by first electronic database search, by title, abstract and applying the PICO criteria, the search results yielded a total of 453 articles. After further full text filtrations only 48 articles were included. In conclusion, the current SR emphasizes the perspective of the IONPs plant-mediated green synthesis advantage(s) when utilized in the biomedical pharmaceutical field, with less toxicity.

Characterization of Rheum ribes with ZnO nanoparticle and its antidiabetic, antibacterial, DNA damage prevention and lipid peroxidation prevention activity of in vitro

This study aims to investigate the antidiabetic, antimicrobial, DNA damage, and lipid peroxidation prevention activity of ZnO NPs/Rr formed as a result of the interaction of Rheum ribes (R.ribes) plant with ZnO. The ZnO NPs/Rr obtained as a result of the reaction were confirmed using high-reliability characterization methods. According to the data obtained as a result of the study, it is seen that the activity of ZnO NPs/Rr to prevent lipid peroxidation is quite strong. Lipid peroxidation inhibition activity of ZnO NPs/Rr at the highest concentration of 250 μg/ml was calculated as % 89.1028. It was observed that ZnO NPs/Rr prevented DNA damage by % 92.1240 at the highest concentration of 100 μg/ml. It was determined that the antidiabetic effect of ZnO NPs/Rr formed by ZnO of R. ribes plant, which is used as a medicinal plant as an antidiabetic, was significant. It appears to have a strong antidiabetic property compared to the positive control acarbose. In our current study, it was observed that ZnO NPs/Rr formed zones ranging from 8 ± 3.0 to 21 ± 4.5 against Gram-positive and Gram-negative microorganisms. It has been determined that ZnO nanoparticles have an antibacterial effect.

Antibacterial approaches in tissue engineering using metal ions and nanoparticles: From mechanisms to applications

Bacterial infection of implanted scaffolds may have fatal consequences and, in combination with the emergence of multidrug bacterial resistance, the development of advanced antibacterial biomaterials and constructs is of great interest. Since decades ago, metals and their ions had been used to minimize bacterial infection risk and, more recently, metal-based nanomaterials, with improved antimicrobial properties, have been advocated as a novel and tunable alternative. A comprehensive review is provided on how metal ions and ion nanoparticles have the potential to decrease or eliminate unwanted bacteria. Antibacterial mechanisms such as oxidative stress induction, ion release and disruption of biomolecules are currently well accepted. However, the exact antimicrobial mechanisms of the discussed metal compounds remain poorly understood. The combination of different metal ions and surface decorations of nanoparticles will lead to synergistic effects and improved microbial killing, and allow to mitigate potential side effects to the host. Starting with a general overview of antibacterial mechanisms, we subsequently focus on specific metal ions such as silver, zinc, copper, iron and gold, and outline their distinct modes of action. Finally, we discuss the use of these metal ions and nanoparticles in tissue engineering to prevent implant failure.

Electrochemical Detection of Dopamine at Fe3O4/SPEEK Modified Electrode

Reported here is the design of an electrochemical sensor for dopamine (DA) based on a screen print carbon electrode modified with a sulphonated polyether ether ketone-iron (III) oxide composite (SPCE-Fe₃O₄/SPEEK). L. serica leaf extract was used in the synthesis of iron (III) oxide nanoparticles (Fe₃O₄NPs). Successful synthesis of Fe₃O₄NP was confirmed through characterization using Fourier transform infrared (FTIR), ultraviolet–visible light (UV–VIS), X-ray diffractometer (XRD), and scanning electron microscopy (SEM). Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of Fe₃O₄/SPEEK in 0.1 M of phosphate buffer solution (PBS) containing 5 mM of potassium ferricyanide (III) solution (K₃[Fe(CN)₆]). An increase in peak current was observed at the nanocomposite modified electrode SPCE-Fe₃O₄/SPEEK) but not SPCE and SPCE-Fe₃O₄, which could be ascribed to the presence of SPEEK. CV and square wave voltammetry (SWV) were employed in the electroxidation of dopamine (0.1 mM DA). The detection limit (LoD) of 7.1 μM and 0.005 μA/μM sensitivity was obtained for DA at the SPCE-Fe₃O₄/SPEEK electrode with concentrations ranging from 5–50 μM. LOD competes well with other electrodes reported in the literature. The developed sensor demonstrated good practical applicability for DA in a DA injection with good resultant recovery percentages and RSDs values.

Biosynthesis of magnetite and cobalt ferrite nanoparticles using extracts of "hairy" roots: preparation, characterization, estimation for environmental remediation and biological application

The "green" synthesis of magnetite and cobalt ferrite nanoparticles (Fe3O4-NPs and CoFe2O4-NPs) using extracts of Artemisia annua L "hairy" roots was proposed. In particular, the effect and role of important variables in the 'green' synthesis process, including the metal-salt ratio, various counter ions in the reaction mixture, concentration of total flavonoids and reducing power of the extract, were evaluated. The morphology and size distribution of the magnetic nanoparticles (MNPs) depended on the metal oxidation state and ratio of Fe(iii) : Fe(ii) in the initial reaction mixture. MNPs obtained from divalent metal salts in the reaction mixture were non-uniform in size with high aggregation level. Samples obtained by the FeCl3/FeSO4 mixture with a ratio of Fe(iii) : Fe(ii) = 1 : 2 showed an irregular shape of the nanoparticles and high aggregation level. MNPs obtained by the FeCl3/FeSO4/CoCl2 mixture showed a regular shape with slight aggregation, and were in the nanosize range (10-17 nm). Thus, this mixture as a metal-precursor was used for MNP biosynthesis in the subsequent experiments. The XRD data showed that the magnetic specimens contained mainly spinel type phase. The data of EDX and XPS analysis indicated that the product of the "green" synthesis was magnetite with some impurities, owing to the obtained ratio of Fe : O being similar to the theoretical atomic ratio of magnetite (3 : 4). The Fe3O4-NP samples were superparamagnetic with high magnetization (until 68 emu g-1). The Co-containing MNPs demonstrated low ferromagnetic properties. The MNPs with pure magnetite phase, very good magnetization and uniform size distribution (ca. 12-14 nm) were prepared by the "hairy" root extract characterized by the highest amount of total flavonoids. According to the FTIR data, the synthesized Fe3O4-NPs had a core-shell like structure, in which the core was composed of Fe3O4, and the shell was formed by bioactive molecules. The presence of several organic compounds (such as flavonoids or carboxylic acids) plays a key role in the suppression of Fe3O4-NP aggregation without addition of a stabilizing agents. Synthesized Fe3O4-NP samples effectively removed Cu(ii) and Cd(ii) with the maximum adsorption capacity, reaching 29.9 mg g-1 and 33.5 mg g-1, respectively. It is probable that the presence of organic components in extracts plays an important role in the adsorption properties of biosynthesised MNPs. The obtained MNPs were successfully applied to the removal of heavy metal ions in the environmental water samples. Fe3O4-NPs also negatively affected plant growth in the case of using "hairy" roots as a test model, and the greatest inhibitory activity (99.56 wt%) was possessed by MNPs with high magnetic properties.

Do Iron Oxide Nanoparticles Have Significant Antibacterial Properties?

The use of metal oxide nanoparticles is one of the promising ways for overcoming antibiotic resistance in bacteria. Iron oxide nanoparticles (IONPs) have found wide applications in different fields of biomedicine. Several studies have suggested using the antimicrobial potential of IONPs. Iron is one of the key microelements and plays an important role in the function of living systems of different hierarchies. Iron abundance and its physiological functions bring into question the ability of iron compounds at the same concentrations, on the one hand, to inhibit the microbial growth and, on the other hand, to positively affect mammalian cells. At present, multiple studies have been published that show the antimicrobial effect of IONPs against Gram-negative and Gram-positive bacteria and fungi. Several studies have established that IONPs have a low toxicity to eukaryotic cells. It gives hope that IONPs can be considered potential antimicrobial agents of the new generation that combine antimicrobial action and high biocompatibility with the human body. This review is intended to inform readers about the available data on the antimicrobial properties of IONPs, a range of susceptible bacteria, mechanisms of the antibacterial action, dependence of the antibacterial action of IONPs on the method for synthesis, and the biocompatibility of IONPs with eukaryotic cells and tissues.

Do Iron Oxide Nanoparticles Have Significant Antibacterial Properties?

The use of metal oxide nanoparticles is one of the promising ways for overcoming antibiotic resistance in bacteria. Iron oxide nanoparticles (IONPs) have found wide applications in different fields of biomedicine. Several studies have suggested using the antimicrobial potential of IONPs. Iron is one of the key microelements and plays an important role in the function of living systems of different hierarchies. Iron abundance and its physiological functions bring into question the ability of iron compounds at the same concentrations, on the one hand, to inhibit the microbial growth and, on the other hand, to positively affect mammalian cells. At present, multiple studies have been published that show the antimicrobial effect of IONPs against Gram-negative and Gram-positive bacteria and fungi. Several studies have established that IONPs have a low toxicity to eukaryotic cells. It gives hope that IONPs can be considered potential antimicrobial agents of the new generation that combine antimicrobial action and high biocompatibility with the human body. This review is intended to inform readers about the available data on the antimicrobial properties of IONPs, a range of susceptible bacteria, mechanisms of the antibacterial action, dependence of the antibacterial action of IONPs on the method for synthesis, and the biocompatibility of IONPs with eukaryotic cells and tissues.

Bactericidal and Virucidal Activities of Biogenic Metal-Based Nanoparticles: Advances and Perspectives

Much progress has been achieved in the preparation and application of engineered nanoparticles (NPs) in the field of medicine, mainly for antibacterial and antiviral applications. In the war against bacteria and viruses, besides traditional antibiotics and antiviral drugs, metal-based nanoparticles, such as silver (AgNPs), copper (CuNPs), copper oxides (CuO-NPs), iron oxide (FeO-NPs), zinc oxide (ZnO-NPs), and titanium oxide (TiO2-NPs) have been used as potent antimicrobial agents. These nanoparticles can be synthesized by traditional methods, such as chemical and physical routes, or more recently by biogenic processes. A great variety of macro and microorganisms can be successfully used as reducing agents of metal salt precursors in the biogenic synthesis of metal-based NPs for antimicrobial activity. Depending on the nature of the biological agent, NPs with different sizes, aggregation states, morphology, surface coatings and charges can be obtained, leading to different antimicrobial effects. Considering the drug resistance to traditional therapies, the development of versatile nanomaterials with potent antimicrobial effects is under intensive investigation. In this sense, this review presents and discusses the recent progress in the preparation and application of metal-based nanoparticles biogenically synthesized for antibacterial and antivirus applications. The strength and limitations are critically discussed.

Plant-mediated synthesis of nanoparticles and their antimicrobial activity against phytopathogens

Nanotechnology is an emerging science with a wide array of applications involving the synthesis and manipulation of materials with dimensions in the range of 1-100 nm. Nanotechnological applications include diverse fields such as pharmaceuticals, medicine, the environment, food processing and agriculture. Regarding the latter, applications are mainly focused on plant growth and crop protection against plagues and diseases. In recent years, the biogenic reduction of elements such as Ag, Au, Cu, Cd, Al, Se, Zn, Ce, Ti and Fe with plant extracts has become one of the most accepted techniques for obtaining nanoparticles (NPs), as it is considered an ecological and cost-effective process without the use of chemical contaminants. The objective of this work was to review NPs synthesized by green chemistry using vegetable extracts, as well as their use as antimicrobial agents against phytopathogenic fungi and bacteria. Given the need for alternatives to control and integrate management of phytopathogens, this review is relevant to agriculture, although this technology is barely exploited in this field. © 2020 Society of Chemical Industry.

Synthesis of gallotannin capped iron oxide nanoparticles and their broad spectrum biological applications

Green synthesized nanoparticles (NPs) have attracted enormous attention for their clinical and non-clinical applications. A natural polyphenol, gallo-tannin (GT) was used to reduce and cap the Fe2O3-NPs. GT-Fe2O3-NPs were synthesized following co-precipitation of FeCl3 and FeSO4·7H2O with GT. Fe2O3-NPs absorbed light at 380 nm. Physicochemically, Fe2O3-NPs were spherical with slight aggregation and average diameter of 12.85 nm. X-ray diffraction confirmed crystallinity and EDX revealed the elemental percentage of iron and oxygen as 21.7% and 42.11%, respectively. FT-IR data confirmed the adsorption of gallo-tannin functional groups. Multiple drug-resistant (MDR) Escherichia coli (ESβL), Pseudomonas aeruginosa (ESβL), and Staphylococcus aureus were found susceptible to 500-1000 μg GT-Fe2O3-NPs per ml. In synergy, Fe2O3-NPs enhanced the efficiency of some antibiotics. GT-Fe2O3 NPs showed significant (P ≤ 0.05) inhibition of growth and biofilm against MDR E. coli, P. aeruginosa, and S. aureus causing morphological and biofilm destruction. Violacein production (quorum sensing mediated) by C. violaceum was inhibited by GT-Fe2O3-NPs in a concentration-dependent manner with a maximum decrease of 3.1-fold. A decrease of 11-fold and 2.32-fold in fungal mycelial growth and human breast cancer (MCF-7) cell viability, respectively was evident. This study suggests a plausible role of gallo-tannin capped Fe2O3-NPs as an alternative antibacterial, antiquorum sensing, antibiofilm, antifungal, and anti-proliferative agent.

Multimetallic Nanoparticles as Alternative Antimicrobial Agents: Challenges and Perspectives

Recently, infectious diseases caused by bacterial pathogens have become a major cause of morbidity and mortality globally due to their resistance to multiple antibiotics. This has triggered initiatives to develop novel, alternative antimicrobial materials, which solve the issue of infection with multidrug-resistant bacteria. Nanotechnology using nanoscale materials, especially multimetallic nanoparticles (NPs), has attracted interest because of the favorable physicochemical properties of these materials, including antibacterial properties and excellent biocompatibility. Multimetallic NPs, particularly those formed by more than two metals, exhibit rich electronic, optical, and magnetic properties. Multimetallic NP properties, including size and shape, zeta potential, and large surface area, facilitate their efficient interaction with bacterial cell membranes, thereby inducing disruption, reactive oxygen species production, protein dysfunction, DNA damage, and killing potentiated by the host's immune system. In this review, we summarize research progress on the synergistic effect of multimetallic NPs as alternative antimicrobial agents for treating severe bacterial infections. We highlight recent promising innovations of multimetallic NPs that help overcome antimicrobial resistance. These include insights into their properties, mode of action, the development of synthetic methods, and combinatorial therapies using bi- and trimetallic NPs with other existing antimicrobial agents.

Utilization of induction furnace steel slag based iron oxide nanocomposites for antibacterial studies

Metals and metal oxide-based nanocomposites play a significant role over the control of microbes. In this study, antibacterial activity of iron oxide (Fe2O3) nanocomposites based on induction furnace (IF) steel slag has been carried out. IF steel slag is an industrial by-product generated from secondary steel manufacturing process and has various metal oxides which includes Al2O3 (7.89%), MnO (5.06), CaO (1.49%) and specifically Fe2O3 (14.30%) in higher content along with metalloid SiO2 (66.42). Antibacterial activity of iron oxide nanocomposites has been revealed on bacterial species such as Micrococcus luteus, Bacillus subtilis and Staphylococcus aureus. Micrococcus luteus has undergone maximum zone of inhibition (ZOI) of 12 mm for 10 mg/mL concentration of steel slag iron oxide nanocomposite. Growth inhibitory kinetics of bacterial species has been studied using ELISA microplate reader at 660 nm by varying the concentration of steel slag iron oxide nanocomposites. The results illustrate that IF steel slag is a potential material and can be utilized in building materials to increase the resistance against biodeterioration.

Graphic abstract

A review of green methods for phyto-fabrication of hematite (α-Fe2O3) nanoparticles and their characterization, properties, and applications

The aim of the current work is the introduction of a quick and simple literature survey about the bio-fabrication of the Alpha Hematite nanoparticles (α-Fe₂O₃) using the plant extracts green method. The survey manifested the utilities of the environmentally friendly biosynthesis methods via extracting different plant species, some of its important physicochemical properties, various instrumental analysis characterization tools, and potential applications.

Biosynthesis of magnetic iron oxide nanoparticles: a review

Nanoparticles promise to revolutionize the way we think of ordinary materials thanks to the new features such small structures exhibit which include strength, durability, optical and magnetics properties. Magnetic iron oxide nanoparticles (IONPs) are a prominent class of NMs because of their potential application in magnetic separation, hyperthermia, targeted drug delivery, and catalysis. Most synthetic nanoparticulate platforms rely on the use of tough chemical procedures associated with unfriendly, harmful and costly reactants. For this reason, bio-inspired approaches have become the most successful alternatives to fabricate nanomaterials in an "eco-friendly" manner, and many bio-protocols that make use of substrates from plants and microorganisms have been successfully applied in the synthesis of magnetic IONPs. In this review, the main biosynthesis protocols applied in the synthesis of iron oxide nanoparticles are discussed. A discussion on the challenges for a second stage perspective which would be a large scale production is also given.

Phyto-Engineered Gold Nanoparticles (AuNPs) with Potential Antibacterial, Antioxidant, and Wound Healing Activities Under in vitro and in vivo Conditions

Background

A diabetic ulcer is one of the major causes of illness among diabetic patients that involves severe and intractable complications associated with diabetic wounds. Hence, a suitable wound-healing agent is urgently needed at this juncture. Greener nanotechnology is a very promising and emerging technology currently employed for the development of alternative medicines. Plant-mediated synthesis of metal nanoparticles has been intensively investigated and regarded as an alternative strategy for overcoming various diseases and their secondary complications like microbial infections. Hence, we are interested in developing phyto-engineered gold nanoparticles as useful therapeutic agents for the treatment of infectious diseases and wounds effectively.

Methods and Results

We have synthesized phyto-engineered gold nanoparticles from the aqueous extract of Acalypha indica and characterized using advanced bio-analytical techniques. The surface plasmon resonance feature and crystalline behavior of gold nanoparticles were revealed by ultraviolet-visible spectroscopy and X-ray diffraction, respectively. High-performance liquid chromatography analysis of the extract demonstrated the presence of different constituents, while major functional groups were interpreted by the Fourier-transform infrared spectroscopy as the various stretching vibrations appeared for important O-H (3443 cm⁻¹), C=O (1644 cm⁻¹) and C-O (1395 cm⁻¹) groups. Scanning electron microscopy, high-resolution transmission electron microscopy results revealed a distribution of spherical and rod-like nanostructures with 20 nm of size. The gold nanoparticle-coated cotton fabric was evaluated for the antibacterial activity against Staphylococcus epidermidis and Escherichia coli bacterial strains which revealed remarkable inhibition at the zone of inhibition of 31 mm diameter against S. epidermidis. Further, antioxidant activity was tested for their free radical scavenging property, and the maximum antioxidant activity of the extract containing gold nanoparticles was found to be 80% at 100 µg/mL. The potent free radical scavenging property of the nanoparticles is observed at IC₅₀ value 16.25 µg/mL. Moreover, in vivo wound-healing activity was carried out using BALB/c mice model with infected diabetic wounds and observed the stained microscopic images at different time intervals (day 2, day 7 and day 15). It was noted that in 15 days, the wound area is completely re-epithelialized due to the presence of different morphologies such as spherical, needle and triangle nanoparticles. The re-epithelialization layer is fully covered by nanoparticles on the wound area and also collagen filled in the scar tissue when compared with the control group.

Conclusion

The pharmacological evaluation results of the study indicated an encouraging antibacterial and antioxidant activity of the greener synthesized gold nanoparticles tethered with aqueous extract of Acalypha indica. Moreover, we demonstrated enhanced in vivo wound-healing efficiency of the synthesized gold nanoparticles through the animal model. Thus, the outcome of this work revealed that the phyto-engineered gold nanoparticles could be useful for biomedical applications, especially in the development of promising antibacterial and wound-healing agents.

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

Bio-synthesized iron oxide nanoparticles for cancer treatment

Various living organisms, such as bacteria, plants, and animals can synthesize iron oxide nanoparticles (IONP). The mechanism of nanoparticle (NP) formation is usually described as relying on the reduction of ferric/ferrous iron ions into crystallized nanoparticulate iron that is surrounded by an organic stabilizing layer. The properties of these NP are characterized by a composition made of different types of iron oxide whose most stable and purest one appears to be maghemite, by a size predominantly comprised between 5 and 380 nm, by a crystalline core, by a surface charge which depends on the nature of the material coating the iron oxide, and by certain other properties such as a sterility, stability, production in mass, absence of aggregation, that have apparently only been studied in details for IONP synthesized by magnetotactic bacteria, called magnetosomes. In the majority of studies, bio-synthesized IONP are described as being biocompatible and as not inducing cytotoxicity towards healthy cells. Anti-tumor activity of bio-synthesized IONP has mainly been demonstrated in vitro, where this type of NP displayed cytotoxicity towards certain tumor cells, e.g. through the anti-tumor activity of IONP coating or through IONP anti-oxidizing property. Concerning in vivo anti-tumor activity, it was essentially highlighted for magnetosomes administered in different types of glioblastoma tumors (U87-Luc and GL-261), which were exposed to a series of alternating magnetic field applications, resulting in mild hyperthermia treatments at typical temperatures of 41-45 °C, leading to the full disappearance of these tumors without any observable side effects.