Review of Green Food Processing techniques. Preservation, transformation, and extraction

Utilization of low-grade walnut kernels for oil extraction using eco-friendly methods: a comparative analysis of oil composition, antioxidant and antimicrobial activity

Walnut oil was extracted using three different eco-friendly extraction methods, solvent extraction (using ethyl acetate [EA] and ethanol [ET]), aqueous enzymatic extraction (AEE), and ultrasound-assisted enzymatic extraction (UAEE), and their lipid yield, lipid composition, physicochemical analysis, mineral composition, total phenols, antioxidant capacity, and antimicrobial activity were analyzed and compared. The AEE technique offered a greater yield (50.6%) than the other extraction methods and gave comparatively higher linoleic acid (66.12%) content. Palmitic, oleic, linoleic, linolenic, and stearic acids were the principal components that GC/MS detected in all the oil samples. UAEE produced the most polyphenols (0.49 mgGAE/g), followed by AEE (0.46 mgGAE/g), EA (0.45 mgGAE/g), and ET (0.35 mgGAE/g). The DPPH assay results were in the order of UAEE (191 μmolTE/kg) > AEE (186 μmolTE/kg) > EA (153 μmolTE/kg) > ET (130 μmolTE/kg). The FRAP assay findings showed a similar pattern: UAEE (112 molTE/kg) > AEE (102 molTE/kg) > EA (96 molTE/kg) > ET (82 molTE/kg). Results suggested that for a higher extraction yield, AEE is the better technique and UAEE is the recommended method for enhancing walnut oil antioxidant capacity. Additionally, it was found that polyphenols considerably increased the antioxidant capacity of walnut oil and are thought to be health-promoting. The results demonstrated the antibacterial effectiveness of the extracted oil against Bacillus subtilis, Bacillus licheniformis, and Staphylococcus aureus. This study provides information about low-cost and ecofriendly technologies of walnut oil extraction for food, cosmetic, and medical uses.

Alternate solvent for soybean oil extraction based on extractability and membrane solvent recovery

Ethyl acetate, acetone, 2-propanol, 1-propanol, and ethanol were screened among the class 3 category solvents as an alternative to hexane based on operational and occupational safety and bio-renewability potential. All five solvents exhibited higher extractability (22.3 to 23.2%) than hexane (21.5%) with soybean flour. Additionally, there was no significant difference in the fatty acid and triacylglycerol (TAG) composition of the oils extracted using alternate solvents and hexane, indicating the oil quality was not affected. More importantly, ethyl acetate (2.1%) resulted in a marginally higher yield of TAG, while 2-propanol showed a nearly equal yield to hexane. Further, membrane desolventizing was attempted to mitigate the limitations of higher thermal energy requirements. One of the polydimethylsiloxane membranes exhibited good selectivity (TAG rejection 85.8%) and acceptable flux (59.3 L·m-2·h-1) with an ethyl acetate miscella system. Under plant-simulated recirculation conditions, a two-stage membrane process reduced the oil content in permeate to 2.5%. The study revealed that ethyl acetate could potentially replace hexane, considering its higher TAG extractability and suitability for the membrane-augmented solvent recycling process in the extraction plants.

The Evolution of Sonochemistry: From the Beginnings to Novel Applications

Sonochemistry is the use of ultrasonic waves in an aqueous medium, to generate acoustic cavitation. In this context, sonochemistry emerged as a focal point over the past few decades, starting as a manageable process such as a cleaning technique. Now, it is found in a wide range of applications across various chemical, physical, and biological processes, creating opportunities for analysis between these processes. Sonochemistry is a powerful and eco-friendly technique often called "green chemistry" for less energy use, toxic reagents, and residues generation. It is increasing the number of applications achieved through the ultrasonic irradiation (USI) method. Sonochemistry has been established as a sustainable and cost-effective alternative compared to traditional industrial methods. It promotes scientific and social well-being, offering non-destructive advantages, including rapid processes, improved process efficiency, enhanced product quality, and, in some cases, the retention of key product characteristics. This versatile technology has significantly contributed to the food industry, materials technology, environmental remediation, and biological research. This review is created with enthusiasm and focus on shedding light on the manifold applications of sonochemistry. It delves into this technique's evolution and current applications in cleaning, environmental remediation, microfluidic, biological, and medical fields. The purpose is to show the physicochemical effects and characteristics of acoustic cavitation in different processes across various fields and to demonstrate the extending application reach of sonochemistry. Also to provide insights into the prospects of this versatile technique and demonstrating that sonochemistry is an adapting system able to generate more efficient products or processes.

Seaweed-derived phenolic compounds as diverse bioactive molecules: A review on identification, application, extraction and purification strategies

Seaweed, a diverse group of marine macroalgae, has emerged as a rich source of bioactive compounds with numerous health-promoting properties. Among these, phenolic compounds have garnered significant attention for their diverse therapeutic applications. This review examines the methodologies employed in the extraction and purification of phenolic compounds from seaweed, emphasizing their importance in unlocking the full potential of these oceanic treasures. The article provides a comprehensive overview of the structural diversity and biological activities of seaweed-derived phenolics, elucidating their antioxidant, anti-inflammatory, and anticancer properties. Furthermore, it explores the impact of extraction techniques, including conventional methods and modern green technologies, on the yield and quality of phenolic extracts. The purification strategies for isolating specific phenolic compounds are also discussed, shedding light on the challenges and advancements in this field. Additionally, the review highlights the potential applications of seaweed-derived phenolics in various industries, such as pharmaceuticals, cosmetics, and functional foods, underscoring the economic value of these compounds. Finally, future perspectives and research directions are proposed to encourage continued exploration of seaweed phenolics, fostering a deeper understanding of their therapeutic potential and promoting sustainable practices in the extraction and purification processes. This comprehensive review serves as a valuable resource for researchers, industry professionals, and policymakers interested in harnessing the untapped potential of phenolic compounds from seaweed for the betterment of human health and environmental sustainability.

Ultrasonic-assisted extraction, anti-biofilm activity, and mechanism of action of Ku Shen (Sophorae Flavescentis Radix) extracts against Vibrio parahaemolyticus

The objective of this study is to optimize the ultrasonic-assisted extraction process of Ku Shen (Sophorae Flavescentis Radix) extracts (KSE) against Vibrio parahaemolyticus and explore their anti-biofilm activity and mechanism of action. The ultrasonic-assisted extraction process of KSE optimized by single factor experiment, Box-Behnken design and response surface methodology was as follows: 93% ethanol as solvent, liquid/material ratio of 30 mL/g, ultrasonic power of 500 W, extraction temperature of 80°C and time of 30 min. Under these conditions, the diameter of inhibition circle of KSE was 15.60 ± 0.17 mm, which had no significant difference with the predicted value. The yield of dried KSE is 32.32 ± 0.57% and the content of total flavonoids in KSE was 57.02 ± 5.54%. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of KSE against V. parahaemolyticus were 0.25 and 0.5 mg/mL, respectively. Crystal violet staining, Congo red plate, spectrophotometry, CCK-8 and scanning electron microscopy were used to investigate the activity and mechanism of action of KSE against V. parahaemolyticus biofilm. The results showed that the sub-MIC of KSE could significantly inhibit biofilm formation, reduce the synthesis of polysaccharide intercellular adhesin (PIA) and the secretion of extracellular DNA. In addition, the inhibition rate of biofilm formation and clearance rate of mature biofilm of 1.0 mg/mL KSE were 85.32 and 74.04%, and the reduction rate of metabolic activity of developing and mature biofilm were 77.98 and 74.46%, respectively. These results were confirmed by visual images obtained by scanning electron microscopy. Therefore, KSE has the potential to further isolate the anti-biofilm agent and evaluate it for the preservation process of aquatic products.

Exploring the therapeutic efficacy of crocetin in oncology: an evidence-based review

With cancer being a leading cause of death globally, there is an urgent need to improve therapeutic strategies and identify effective chemotherapeutics. This study aims to highlight the potential of crocetin, a natural product derived from certain plants, as an anticancer agent. It was  conducted an extensive review of the existing literature to gather and analyze the most recent data on the chemical properties of crocetin and its observed effects in various in vitro and in vivo studies. The study  particularly focused on studies that examined crocetin's impact on cell cycle dynamics, apoptosis, caspases and antioxidant enzyme levels, tumor angiogenesis, inflammation, and overall tumor growth. Crocetin exhibited diverse anti-tumorigenic activities including inhibition of tumor cell proliferation, apoptosis induction, angiogenesis suppression, and potentiation of chemotherapy. Multiple cellular and molecular pathways such as the PI3K/Akt, MAPK and NF-κB were modulated by it. Crocetin demonstrates promising anti-cancer properties and offers potential as an adjunctive or alternative therapy in oncology. More large-scale, rigorously designed clinical trials are needed to establish therapeutic protocols and ascertain the comprehensive benefits and safety profile of crocetin in diverse cancer types.

Optimization of Bioactive Compound Extraction from Saffron Petals Using Ultrasound-Assisted Acidified Ethanol Solvent: Adding Value to Food Waste

The saffron industry produces large by-products, including petals with potential bioactive compounds, which are cheap and abundant, making them an attractive alternative to expensive stigmas for extracting bioactive components. This study aimed to optimize the extraction conditions of bioactive compounds from vacuum-dried saffron petals using an ultrasound-assisted acidified ethanol solvent. Three factors were considered: ethanol concentration (0-96%), citric acid concentration in the final solvent (0-1%), and ultrasound power (0-400 watt). This study examined the effects of these factors on parameters like maximum antioxidant activity, total anthocyanin content, total phenolic content, and the total flavonoid content of the extraction. This study found that saffron petal extract's antioxidant activity increases with higher ethanol concentration, citric acid dose, and ultrasound power, but that an increased water content leads to non-antioxidant compounds. Increasing the dosage of citric acid improved the extraction of cyanidin-3-glucoside at different ultrasound power levels. The highest extraction was achieved with 400 watts of ultrasound power and 1% citric acid. Ethanol concentration did not affect anthocyanin extraction. Higher ethanol concentration and greater citric acid concentration doses resulted in the maximum extraction of total phenolic content, with a noticeable drop in extraction at higher purity levels. This study found that increasing the proportion of citric acid in the final solvent did not affect flavonoid extraction at high ethanol concentration levels, and the highest efficiency was observed at 200 watts of ultrasound power. The optimum values of the independent parameters for extracting bioactive compounds from saffron petals included 96% ethanol concentration, 0.67% citric acid concentration, and 216 watts of ultrasound power, resulting in a desirability value of 0.82. This ultrasound-assisted acidified ethanolic extract can be used in the food industry as a natural antioxidant and pigment source.

Ultrasound-assisted fermentation of Porphyra yezoensis sauce at different growth stages using Lactiplantibacillus plantarum: Metabolic response and biological activity

This study first employed ultrasonic-assisted fermentation of seaweed foot material with Lactiplantibacillus plantarum to produce Porphyra yezoensis sauce. The aim was to examine L. plantarum's growth and metabolism of nutritional components at different growth stages under low- (133.99 W/L) and high-ultrasonic power densities (169.17 W/L). After 24-h fermentation, L. plantarum exhibited a 21.32 % increase in the sonicated P. yezoensis sauce at 133.99 W/L and the logarithmic growth phase compared to that at 169.17 W/L. In addition, compared to the non-sonicated sauce, total phenolic and flavonoid contents increased by around 58 % and 27 % in sonicated sauce at 133.99 W/L, reaching 92.38 mg GEA/g DW and 111.08 mg RE/g DW, respectively. Principal Component Analysis (PCA) of the evaluation criteria for different fermentation stages under 133.99 W/L power ultrasonication revealed that the P. yezoensis sauce generated more phenolic compounds and exhibited stronger antioxidant capabilities in the sonicated sample at the logarithmic phase of L. plantarum. Compared to the traditional treated P. yezoensis sauce, the content of free amino acids was significantly increased in sonicated sauce, especially for logarithmic phase. Finally, GC-IMS analysis demonstrated that the ultrasonication at logarithmic phase released more volatile compounds compared to the non-sonicated sauce. This led to a reduction in the fishy odour of the Porphyra yezoensis sauce and an improved release of favourable flavour compounds.

Microwave-assisted extraction optimization of sesquiterpene lactones from Inula helenium roots: A sustainable approach to reduce energy consumption and carbon footprint

Inula helenium roots are consumed as natural flavor components and raw or cooked as food, and their extracts are rich in sesquiterpene lactones such as alantolactone (AL) and isoalantolactone (IAL), which have recently attracted great attention due to their pharmacological properties. The industrial utilization of these compounds requires the development of green, efficient, cost-effective, and sustainable extraction protocols. Therefore, this study focused on the optimization of microwave-assisted extraction (MAE) process variables using Face-Centered Central Composite Design (FC-CCD). Then, maceration was applied as a conventional technique, and these techniques were compared in terms of extraction efficiency, morphological changes, antimicrobial activities, carbon emissions, and energy consumption. As a result, optimal MAE conditions, i.e., EtOH: water ratio (X 1) = 100:0, liquid/sample ratio (X 2) = 30:1 mL/g, microwave power (X 3) = 300 W, and irradiation time (X 4) = 5 min, were obtained with AL and IAL yields of 54.99 ± 0.11 (mg/g) and 48.40 ± 0.19 (mg/g), respectively. The extract obtained by MAE had similar or better activity than positive controls in most cases and formed the largest inhibition zones against E. coli (29.5 ± 0.71 mm) and A. niger (34.75 ± 1.06 mm). Morphological changes of I. helenium roots after extraction were observed by scanning electron microscopy. Additionally, MAE was 43.4 times faster than maceration, resulting in 228.6 times less energy consumption and carbon emissions. Based on these findings, it is recommended to use MAE as an industrial green technique for the extraction of sesquiterpene lactones with potential applications in nutraceuticals and food products in terms of sustainable economy and environmental protection.

Ultrasound assisted extraction and liposome encapsulation of olive leaves and orange peels: How to transform biomass waste into valuable resources with antimicrobial activity

Every year million tons of by-products and waste from olive and orange processing are produced by agri-food industries, thus triggering environmental and economic problems worldwide. From the perspective of a circular economy model, olive leaves and orange peels can be valorized in valuable products due to the presence of bioactive compounds such as polyphenols exhibiting beneficial effects on human health. The aqueous extracts of olive leaves and orange peels rich in phenolic compounds were prepared by ultrasound-assisted extraction. Both extracts were characterized in terms of yield of extraction, total phenolic content and antioxidant capacity; the polyphenolic profiles were deeper investigated by HPLC-MS analysis. Each extract was included in liposomes composed by a natural phospholipid, 1,2-dioleoyl-sn-glycero-3-phosphocholine,and cholesterol prepared according to the thin-layer evaporation method coupled with a sonication process. The antimicrobial activity of the extracts, free and loaded in liposomes, was investigated according to the broth macrodilution method against different strains of potential bacterial pathogenic species: Staphylococcus aureus (NCIMB 9518), Bacillus subtilis (ATCC 6051) and Enterococcus faecalis (NCIMB 775) as Gram-positive, while Escherichia coli (NCIMB 13302), Pseudomonas aeruginosa (NCIMB 9904) and Klebsiella oxytoca (NCIMB 12259) as Gram-negative. The encapsulation of olive leaves extract in liposomes enhanced its antibacterial activity against S. aureus by an order of magnitude.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Characterization of Sodium Alginate-Based Films Blended with Olive Leaf and Laurel Leaf Extracts Obtained by Ultrasound-Assisted Technology

Due to environmental concerns, there is an increasing need to reduce the use of synthetic and non-renewable packaging materials to reduce waste and increase sustainability. This study aimed to characterise sodium alginate edible-based films (SA) incorporated with laurel leaf extract (LLE) and olive leaf extract (OLE) obtained by ultrasound-assisted extraction. Determination of total phenolic content, antioxidant, and antimicrobial activity was performed for the extracts and films. Also, thickness, tensile strength, elongation at break, modulus of elasticity, opacity and colour, moisture content, water vapour permeability (WVP), Fourier-transform infrared spectroscopy (FTIR) spectra, and surface morphology by scanning electron microscope (SEM) analyses were performed for the films. LLE yielded better results in terms of phenolic content (195 mg GAE/g), antioxidant (2.1 TE/g extract) and antimicrobial activity (MIC at 1% for Listeria monocytogenes and Staphylococcus aureus, and 1.8% for Enterococcus faecalis). For the films, the simultaneous incorporation of LLE 1% (w/v) and OLE 1% (w/v) resulted in a significant reduction of approximately 2 log CFU/g against S. aureus. The addition of LLE and OLE extracts also proved to improve barrier properties (lower WVP for SA films with LLE 1% + OLE 1%, 3.49 × 10-11 g m-1 s-1 Pa-1) and promoted changes in resistance and flexibility. The results demonstrated that active alginate-based films can be valuable for enhancing food preservation.

Polyphenol Extraction from Food (by) Products by Pulsed Electric Field: A Review

Nowadays, more and more researchers engage in studies regarding the extraction of bioactive compounds from natural sources. To this end, plenty of studies have been published on this topic, with the interest in the field growing exponentially. One major aim of such studies is to maximize the extraction yield and, simultaneously, to use procedures that adhere to the principles of green chemistry, as much as possible. It was not until recently that pulsed electric field (PEF) technology has been put to good use to achieve this goal. This new technique exhibits many advantages, compared to other techniques, and they have successfully been reaped for the production of extracts with enhanced concentrations in bioactive compounds. In this advancing field of research, a good understanding of the existing literature is mandatory to develop more advanced concepts in the future. The aim of this review is to provide a thorough discussion of the most important applications of PEF for the enhancement of polyphenols extraction from fresh food products and by-products, as well as to discuss the current limitations and the prospects of the field.

Designing Nutrition for Health-Incorporating Dietary By-Products into Poultry Feeds to Create Functional Foods with Insights into Health Benefits, Risks, Bioactive Compounds, Food Component Functionality and Safety Regulations

This review delves into the concept of nutrition by design, exploring the relationship between poultry production, the utilization of dietary by-products to create functional foods, and their impact on human health. Functional foods are defined as products that extend beyond their basic nutritional value, offering potential benefits in disease prevention and management. Various methods, including extraction, fermentation, enrichment, biotechnology, and nanotechnology, are employed to obtain bioactive compounds for these functional foods. This review also examines the innovative approach of enhancing livestock diets to create functional foods through animal-based methods. Bioactive compounds found in these functional foods, such as essential fatty acids, antioxidants, carotenoids, minerals, vitamins, and bioactive peptides, are highlighted for their potential in promoting well-being and mitigating chronic diseases. Additionally, the review explores the functionality of food components within these products, emphasizing the critical roles of bioaccessibility, bioactivity, and bioavailability in promoting health. The importance of considering key aspects in the design of enhanced poultry diets for functional food production is thoroughly reviewed. The safety of these foods through the establishment of regulations and guidelines was reviewed. It is concluded that the integration of nutrition by design principles empowers individuals to make informed choices that can prioritize their health and well-being. By incorporating functional foods rich in bioactive compounds, consumers can proactively take steps to prevent and manage health issues, ultimately contributing to a healthier society and lifestyle.

Recent advancement in ultrasound-assisted novel technologies for the extraction of bioactive compounds from herbal plants: a review

Herbal plants comprise potent bioactives, and they have a potential for the development of functional foods. Ultrasonication technology can be used to enhance the efficiency and quality of these bioactivities. The present review discussed the ultrasound-assisted novel extraction technologies (supercritical carbon dioxide (CO2) and high pressurized liquid), including mechanistic understanding, influencing factors, extract process efficiency, and the recovery of bioactives with an industrial perspective. The strong observations of this study are the novel ultrasound-induced extraction process variables, such as ultrasound amplitude, sonication time, temperature, solid-solvent ratio, and pressure, are significantly influenced and must be optimized for maximum recovery of bioactives. The novel green technologies (ultrasound and assisted) could remarkably improve the extraction efficiency and enhance the quality of green extract. This review will support technological understanding about the impact on process parameters for the extraction of bioactives for the development of functional foods and nutraceuticals.

Factors Affecting the Extraction of (Poly)Phenols from Natural Resources Using Deep Eutectic Solvents Combined with Ultrasound-Assisted Extraction

Replacing conventional solvents with deep eutectic solvents (DES) has shown promising effects on the extraction yield of (poly)phenols. DES can be combined with ultrasound-assisted extraction (UAE) to further increase the extraction efficiency of (poly)phenols from natural resources compared to conventional methods. This review discusses the factors associated with DES (composition, solvent-to-sample ratio, extraction duration, and temperature) and UAE (ultrasound frequency, power, intensity, and duty cycle) methods that influence the extraction of (poly)phenols and informs future improvements required in the optimization of the extraction process. For the optimum (poly)phenol extraction from natural resources, the following parameters shall be considered: ultrasound frequency should be in the range of 20-50 kHz, ultrasound intensity in the range of 60-120 W/cm2, ultrasound duty cycle in the range of 40-80%, ultrasound duration for 10-30 minutes, and ultrasound temperature for 25-50 °C. Among the reported DES systems, choline chloride with glycerol or lactic acid, with a solvent-to-sample mass ratio of 10-30:1 shown to be effective. The solvent composition and solvent-to-sample mass ratio should be selected according to the target compound and the source material. However, the high viscosity of DES is among the major limitations. Optimizing these factors can help to increase the yield of extracted (poly)phenols and their applications.

A review of green methods used in starch-polyphenol interactions: physicochemical and digestion aspects

The interactions of starch with lipids, proteins, and other major food components during food processing are inevitable. These interactions could result in the formation of V-type or non-V-type complexes of starch. The starch-lipid complexes have been intensively studied for over five decades, however, the complexes of starch and polyphenols are relatively less studied and are the subject of recent interest. The interactions of starch with polyphenols can affect the physicochemical properties and its digestibility. The literature has highlighted several green methods such as ultrasound, microwave, high pressure, extrusion, ball-milling, cold plasma etc., to assist interactions of starch with polyphenols. However, comprehensive information on green methods to induce starch-polyphenol interactions is still scarce. Therefore, in light of the importance and potential of starch-polyphenol complexes in developing functional foods with low digestion, this review has summarized the novel green methods employed in interactions of starch with flavonoids, phenolic acids and tannins. It has been speculated that flavonoids, phenolic acids, and tannins, among other types of polyphenols, may have anti-digestive activities and are also revealed for their interaction with starch to form either an inclusion or non-inclusion complex. Further information on the effects of these interactions on physicochemical parameters to understand the chemistry and structure of the complexes is also provided.

Hyaluronic Acid-Extraction Methods, Sources and Applications

In this review, a compilation of articles in databases on the extraction methods and applications of hyaluronic acid (HA) was carried out. HA is a highly hydrated component of different tissues, including connective, epithelial, and neural. It is an anionic, linear glycosaminoglycan (GAG) primarily found in the native extracellular matrix (ECM) of soft connective tissues. Included in the review were studies on the extraction methods (chemical, enzymatical, combined) of HA, describing advantages and disadvantages as well as news methods of extraction. The applications of HA in food are addressed, including oral supplementation, biomaterials, medical research, and pharmaceutical and cosmetic industry applications. Subsequently, we included a section related to the structure and penetration routes of the skin, with emphasis on the benefits of systems for transdermal drug delivery nanocarriers as promoters of percutaneous absorption. Finally, the future trends on the applications of HA were included. This final section contains the effects before, during, and after the application of HA-based products.

Study of heat and mass transfer processes during extraction of plant raw materials under the influence of ultrasound

Theoretical analysis of the process of biologically active substances (BAS) extraction from plant raw materials in conditions of ultrasonic action and without it to describe the kinetics of the process has been conducted. A mathematical model of the process of BAS extraction from plant raw materials to establish the dependence of changes in the concentration of BAS in the volume of cells in the intercellular space and in the main volume of the extractant has been developed. On the basis of the solution of the mathematical model the duration of the model of BAS extraction process from plant raw materials has been established, results show that the duration of the process of extraction of oil from plant raw materials in an acoustic extractor decreases by 1.5 times ultrasonic extraction can be used for the extraction of biologically active substances, such as essential oils, lipids and dietary supplements from plants.

Antioxidant and Anti-Cytotoxicity Effect of Phenolic Extracts from Psidium guajava Linn. Leaves by Novel Assisted Extraction Techniques

Phytochemicals (PCs) are gaining popularity due to their antioxidant effects and potential protection against infection, cardiovascular disease, and cellular metabolic activity. These PCs must be retained as much as possible during extraction. This research focused on the extraction of PC from Psidium guajava Linn. leaves due to higher antioxidant potential. Solvent extraction (SE), microwave-assisted extraction (MAE), and ultrasound-assisted extraction (UAE) using distilled water (DW) or 60% (v/v) ethanol/water (ET) were used for the extraction of PC. ET shows higher total phenolic (TPC) and total flavonoid content (TFC) as well as higher antioxidant activity than DW. Phytochemical screening demonstrated that all of the screening showed positive results in all extraction methods, except glycoside. There were no significant differences (p > 0.05) in TPC and TFC during MAE/ET, SE/ET, and UAE/ET. Antioxidant analysis shows that MAE and SE resulted in high (p < 0.05) DPPH and FRAP values for ET and DW, respectively. MAE/ET showed the highest inhibitory activity (IC₅₀ = 16.67 µg/mL). HPLC and TLC analysis reveal the fingerprint of morin, which might function as an anticancer agent with other bioactives. Increasing the extract content increased the inhibitory activity of SW480 cells via MTT assay. In conclusion, MAE/ET is the most efficient among the extraction techniques in terms of anti-cytotoxicity effects.

Ultrasound-assisted enzymatic synthesis of galacto-oligosaccharides using native whey with two commercial β-galactosidases: Aspergillus oryzae and Kluyveromyces var lactis

Native whey obtained during casein micelle microfiltration was used as a novel source to produce galacto-oligosaccharides (GOS). Since the presence of macromolecules and other interferers reduces biocatalyst performance, this work evaluated the effect of different ultrasound processing conditions on GOS synthesis using concentrated native whey. Ultrasonic intensities (UI) below 11 W/cm² tended to increase the activity in the enzyme from Aspergillus oryzae for several minutes but accelerated the inactivation in that from Kluyveromyces lactis. At 40 °C, 40 % w/w native whey, 70 % wave amplitude, and 0.6 s/s duty-cycle, a UI of 30 W/cm² was achieved, and the increased specific enzyme productivity was similar to the values obtained with pure lactose (∼0.136 g GOS/h/mg_E). This strategy allows for obtaining a product containing prebiotics with the healthy and functional properties of whey proteins, avoiding the required purification steps used in the production of food-grade lactose.

The Impact of Pulsed Electric Fields on Milk's Macro- and Micronutrient Profile: A Comprehensive Review

Consumers around the world are attracted to products with beneficial effects on health. The stability, functionality, and integrity of milk constituents are crucial determinants of product quality in the dairy industry. Milk contains macronutrients and micronutrients that aid in a wide range of physiological functions in the human body. Deficiencies of these two types of nutrients can confine growth in children and increase the risk of several diseases in adults. The influence of pulsed electric fields (PEF) on milk has been extensively reviewed, mostly concentrating on the inactivation of microbes and enzymes for preservation purposes. Therefore, the information on the variations of milk macro- and micronutrients treated by PEF has yet to be elucidated and it is imperative as it may affect the functionality, stability, and integrity of the milk and dairy products. In this review, we describe in detail the introduction, types, and components of PEF, the inactivation mechanism of biological cells by PEF, as well as the effects of PEF on macro- and micronutrients in milk. In addition, we also cover the limitations that hinder the commercialization and integration of PEF in the food industry and the future outlook for PEF. The present review consolidates the latest research findings investigating the impact of PEF on the nutritional composition of milk. The assimilation of this valuable information aims to empower both industry professionals and consumers, facilitating a thorough understanding and meticulous assessment of the prospective adoption of PEF as an alternative technique for milk pasteurization.

Role of Enzymatic Reactions in Meat Processing and Use of Emerging Technologies for Process Intensification

Meat processing involves different transformations in the animal muscle after slaughtering, which results in changes in tenderness, aroma and colour, determining the quality of the final meat product. Enzymatic glycolysis, proteolysis and lipolysis play a key role in the conversion of muscle into meat. The accurate control of enzymatic reactions in meat muscle is complicated due to the numerous influential factors, as well as its low reaction rate. Moreover, exogenous enzymes are also used in the meat industry to produce restructured products (transglutaminase), to obtain bioactive peptides (peptides with antioxidant, antihypertensive and gastrointestinal activity) and to promote meat tenderization (papain, bromelain, ficin, zingibain, cucumisin and actinidin). Emerging technologies, such as ultrasound (US), pulsed electric fields (PEF), moderate electric fields (MEF), high-pressure processing (HPP) or supercritical CO₂ (SC-CO₂), have been used to intensify enzymatic reactions in different food applications. This review aims to provide an overview of the enzymatic reactions taking place during the processing of meat products, how they could be intensified by using emerging technologies and envisage potential applications.

The state-of-the-art research of the application of ultrasound to winemaking: A critical review

As a promising non-thermal physical technology, ultrasound has attracted extensive attention in recent years, and has been applied to many food processing operation units, such as involving filtration, freezing, thawing, sterilization, cutting, extraction, aging, etc. It is also widely used in the processing of meat products, fruits and vegetables, and dairy products. With regard to its application in winemaking, most of the studies available in the literature are focused on the impact of ultrasound on a certain characteristic of wine, lacking of systematic sorting of these literatures. This review systematically summarizes and explores the current achievements and problems of the application of ultrasound to the different stages of winemaking, including extraction, fermentation, aging and sterilization. Summarizing the advantages and disadvantages of ultrasound application in winemaking and its development in future development.

Sonoprocessing improves phenolics profile, antioxidant capacity, structure, and product qualities of purple corn pericarp extract

For the first time, purple corn pericarp (PCP) was converted to polyphenol-rich extract using two-pot ultrasound extraction technique. According to Plackett-Burman design (PBD), the significant extraction factors were ethanol concentration, extraction time, temperature, and ultrasonic amplitude that affected total anthocyanins (TAC), total phenolic content (TPC), and condensed tannins (CT). These parameters were further optimized using the Box-Behnken design (BBD) method for response surface methodology (RSM). The RSM showed a linear curvature for TAC and a quadratic curvature for TPC and CT with a lack of fit > 0.05. Under the optimum conditions (ethanol (50%, v/v), time (21 min), temperature (28 °C), and ultrasonic amplitude (50%)), a maximum TAC, TPC, and CT of 34.99 g cyanidin/kg, 121.26 g GAE/kg, and 260.59 of EE/kg, respectively were obtained with a desirability value 0.952. Comparing UAE to microwave extraction (MAE), it was found that although UAE had a lower extraction yield, TAC, TPC, and CT, the UAE gave a higher individual anthocyanin, flavonoid, phenolic acid profile, and antioxidant activity. The UAE took 21 min, whereas MAE took 30 min for maximum extraction. Regarding product qualities, UAE extract was superior, with a lower total color change (ΔE) and a higher chromaticity. Structural characterization using SEM showed that MAE extract had severe creases and ruptures, whereas UAE extract had less noticeable alterations and was attested by an optical profilometer. This shows that ultrasound, might be used to extract phenolics from PCP as it requires lesser time and improves phenolics, structure, and product qualities.

Effects of Low-Frequency Electromagnetic Field on the Physicochemical Properties of Freeze-Thawed Mongolian Cheese

To verify whether a low-frequency electromagnetic field (LFE field) can help reduce structural damage during the freeze-thaw process and maintain shelf life, Mongolian cheese was frozen at -10, -20, and -30 °C, then thawed at microwave or room temperature. Results showed that LFE field-assisted frozen treatment could reduce ice crystal size and protect the protein matrix structure of cheese. Frozen-thawed cheese retained 96.5% of its hardness and showed no significant difference from the fresh one in elasticity, cohesion, and chewiness. Frozen cheese showed similar but slower ripening behavior during storage, suggesting a potential application of the LFE field in the frozen storage of high-protein foods.

Ultrasound-Assisted Extraction of Isoquercetin from Ephedra alata (Decne): Optimization Using Response Surface Methodology and In Vitro Bioactivities

Isoquercetin (ISQ) is reported to be a powerful antioxidant with extremely high bioavailability and structural stability compared to aglycone quercetin. Despite this, it is not well studied due to the limited methods for its extraction. With the growing interest in the research and analysis of ISQ-rich herbs, there is a need to optimize an efficient and rapid method for their extraction. In the present study, the ultrasound-assisted extraction of ISQ from Ephedra alata Decne was optimized by a response surface methodology (RSM) using high-performance liquid chromatography as a separation method. The best possible ranges for extraction time (10–30 min), temperature (50–70 °C), ultrasonic power (60–90 W), solvent-to-solid ratio (50–70 mL/g), and ethanol concentration (50–70%) were determined using a single factor analysis. Subsequently, an optimization of the extraction conditions was performed with RSM using the Box–Behnken design. An ultrasonication time of 10 min, a temperature of 60 °C, a power of 75 W, a solvent-to-solid ratio of 60 mL/g, and an ethanol concentration of 70% were determined to be the optimal conditions for the highest recovery of isoquercetin (1033.96 ± 3.28 µg/g). Furthermore, E. alata powder morphology (using a scanning electron microscope), antioxidant activities, and the inhibition potential of key enzymes involved in skin aging (elastase and collagenase), hyperpigmentation (tyrosinase), diabetes (α-amylase), inflammation (hyaluronidase), and neurodegenerative disorders (cholinesterase) were determined and compared with those using the Soxhlet method. This study established a highly efficient method for ISQ extraction and suggested several potential applications of ISQ in the pharmaceutical and cosmetics industries.

Effect of ultrasonic degradation on the structural feature, physicochemical property and bioactivity of plant and microbial polysaccharides: A review

With the bioactivities of antioxidant, anti-bacteria, anti-inflammation, immune regulation, antitumor and anti-coagulation, plant and microbial polysaccharides have been widely used in foods, medicine and cosmetics. However, how structure features affect the physicochemical property and bioactivity of plant and microbial polysaccharides is still unclear. Ultrasonic degradation usually degrades or modifies plant and microbial polysaccharides with different physicochemical properties and bioactivities by affecting their chemical or spatial structures via mechanical bond breaking and cavitation effects. Therefore, ultrasonic degradation might be an effective strategy for producing bioactive plant and microbial polysaccharides and analyzing their structure-function relationship. Present review summarized the influence of ultrasonic degradation on structural feature, physicochemical property and bioactivity of plant and microbial polysaccharides. Moreover, further problems need to be paid attention to during the application of ultrasonication for plant and microbial polysaccharides degradation are also recommended. Overall, present review will provide an efficient method for producing enhanced bioactive plant and microbial polysaccharides and analyzing their structure-activity relationship based on ultrasonic degradation.

Pressurized Liquid Extraction for the Recovery of Bioactive Compounds from Seaweeds for Food Industry Application: A Review

Seaweeds are an underutilized food in the Western world, but they are widely consumed in Asia, with China being the world’s larger producer. Seaweeds have gained attention in the food industry in recent years because of their composition, which includes polysaccharides, lipids, proteins, dietary fiber, and various bioactive compounds such as vitamins, essential minerals, phenolic compounds, and pigments. Extraction techniques, ranging from more traditional techniques such as maceration to novel technologies, are required to obtain these components. Pressurized liquid extraction (PLE) is a green technique that uses high temperatures and pressure applied in conjunction with a solvent to extract components from a solid matrix. To improve the efficiency of this technique, different parameters such as the solvent, temperature, pressure, extraction time and number of cycles should be carefully optimized. It is important to note that PLE conditions allow for the extraction of target analytes in a short-time period while using less solvent and maintaining a high yield. Moreover, the combination of PLE with other techniques has been already applied to extract compounds from different matrices, including seaweeds. In this way, the combination of PLE-SFE-CO2 seems to be the best option considering both the higher yields obtained and the economic feasibility of a scaling-up approximation. In addition, the food industry is interested in incorporating the compounds extracted from edible seaweeds into food packaging (including edible coating, bioplastics and bio-nanocomposites incorporated into bioplastics), food products and animal feed to improve their nutritional profile and technological properties. This review attempts to compile and analyze the current data available regarding the application of PLE in seaweeds to determine the use of this extraction technique as a method to obtain active compounds of interest for food industry application.

Conventional and innovative extraction technologies to produce food-grade hop extracts: Influence on bitter acids content and volatile organic compounds profile

Hop extracts represent a natural alternative to synthetic food additives because of their high content of bitter acids and volatile organic compounds (VOCs) with bittering, flavoring, and antimicrobial properties. However, broader uses of hop extracts as natural techno-functional ingredients rely on the identification of sustainable and affordable extraction technologies allowing to diversify the processes and produce extracts characterized by different compositions and, consequently, qualitative properties. Thus, this study is aimed to evaluate and compare the effect of innovative and conventional extraction methods on the bitter acids content and VOCs pattern of food-grade ethanolic hop extracts for food applications. Innovative extractions were carried out by using two ultrasound systems (a laboratory bath [US] and a high-power ultrasound bath [HPUS]), and a high-pressure industrial process (high hydrostatic pressure [HHP]). Conventional extractions (CONV) were performed under dynamic maceration at 25 and 60°C; for ultrasound and conventional methods, the effect of the extraction time was also investigated. Among the extracts, the highest and lowest content of bitter acids was found in CONV 60°C extracts, and HHP and CONV 25°C extracts, respectively. Of the 34 VOCs identified in dry hops, ∼24 compounds were found in US, HPUS and CONV extracts, while only 18 were found in HHP. CONV extractions showed higher selectivity for sesquiterpenes, while US and HPUS showed higher selectivity for esters and monoterpenes. Hierarchical cluster analysis (HCA) and partial least squares-discriminant analysis (PLS-DA) allowed classifying hop extracts based on the extraction methods and also allowed highlighting the technological conditions to produce hop extracts with specific techno-functional and flavoring properties. PRACTICAL APPLICATION: The study showed that different extraction methods can lead to hop products with varying sensory and functional properties. By selecting the right extraction method, companies can produce hop extracts with specific compositions that meet their needs for clean label and sustainable food products, as well as new edible packaging or coatings.

Effect of Storage Conditions on the Stability of Polyphenols of Apple and Strawberry Purees Produced at Industrial Scale by Different Processing Techniques

During a food product's life, storage conditions affect its composition of nutrients, bioactive compounds, and sensory attributes. In this research, strawberry and apple purees were selected as a model to examine how the storage of various purees industrially produced with different technologies affect the bioactive phenolic compounds, color, and sensory attributes. Specifically, fruit products processed on an industrial scale by different technologies including freezing, thermal treatment (mild and standard), and high-pressure processing were studied, as well as storage for up to 12 months at -20, 4, and 24 °C. In strawberry puree, storage conditions had a stronger impact on phenolic compound levels, particularly on anthocyanins, whereas in apple puree, the initial processing techniques exerted a greater influence than storage conditions, mainly caused by the hot or cold crushing processes. In general, proanthocyanidins were the major phenolic group and the most stable during storage, while anthocyanins were the group most affected by both processing and storage. Apple flavonols and dihydrochalcones were quite stable, while strawberry ellagitannins suffered higher degradations during storage. Through our analysis, it is found that during storage, the stability of polyphenols in each fruit is different, and processing and storage can be either detrimental or even beneficial. The selection of the ideal storage conditions (time and temperature) is a key factor to maintaining the polyphenol content in sensitive fruits such as strawberries. However, storage conditions are in some cases more important to minimizing the polyphenol losses than how the product is processed.

Effect of Microwave and Ultrasound during the Killing Stage of the Curing Process of Vanilla (Vanilla planifolia, Andrews) Pods

The curing process (CP) of Vanilla planifolia pods, which is a long and tedious process, is necessary to obtain the natural vanilla extract. This research evaluated the application of microwave (M) and ultrasound (U) during the "killing" stage of the CP and its effect on vanillin content and β-glucosidase activity. The pods were immersed in a container with water or with moistened samples for the M treatments. In U treatments, the pods were immersed in an ultrasonic bath. After this stage, the samples were subjected to an additional U treatment. The results show that the application of these technologies significantly improves vanillin yield (p < 0.05) and the curing time is reduced to 20 days. U treatments subjected to additional sonication at 38 °C obtain more than double the yield of vanillin regarding control. The effect of M and U on cell structure damage increases with additional sonication, but at 15 min, β-glucosidase inactivation decreases the final yield. Disposition of samples in M also affects the final vanillin content. There is no significant correlation between β-glucosidase and vanillin in the different treatments. The application of M and U with the appropriate parameters reduces the CP time without affecting the compounds of interest.

The Role of Emergent Processing Technologies in Beer Production

The brewing industry is regarded as a fiercely competitive and insatiable sector of activity, driven by the significant technological improvements observed in recent years and the most recent consumer trends pointing to a sharp demand for sensory enhanced beers. Some emergent and sustainable technologies regarding food processing such as pulsed electric fields (PEF), ultrasound (US), thermosonication (TS), high-pressure processing (HPP), and ohmic heating (OH) have shown the potential to contribute to the development of currently employed brewing methodologies by both enhancing the quality of beer and contributing to processing efficiency with a promise of being more environmentally friendly. Some of these technologies have not yet found their way into the industrial brewing process but already show potential to be embedded in continuous thermal and non-thermal unit operations such as pasteurization, boiling and sterilization, resulting in beer with improved organoleptic properties. This review article aims to explore the potential of different advanced processing technologies for industrial application in several key stages of brewing, with particular emphasis on continuous beer production.

Recent Insights on the Role of Various Food Processing Operations Towards the Development of Sustainable Food Systems

Chronic hunger and malnutrition will eventually result from the population's rapid growth. It is unlikely to succeed in tackling the rising challenges of delivering sustainable food for all people unless high attention is paid on the function of food processing to ensure the supply of stable food. It is impossible to overstate the importance of developing food processing and preservation technologies that can reduce food losses and wastage during surplus seasons. Therefore, sustainable food systems must be developed to provide healthy diets without damaging our world and its resources. The goal is to use various perspectives to confirm why food processing is crucial to future food supply. It is important to show the appropriate utilization of sustainability factors and effect assessments to construct for feeding the globe while staying within planetary limits. There has never been a better time to assure a plentiful food supply to feed the people than right now, when the population is expanding at a worrying rate. The sustainable food project seeks to move the food systems in a long-term, more equitable direction. Food processing, or the conversion of raw materials into functional, edible, and consumer acceptable food, is a critical link in the food value chain between consumption and production. This review looked at various existing and emerging food processing followed by preservation techniques. Food systems must also attempt to reduce food waste and losses, as well as the current and future impacts on the environment and society, to be sustainable.

Study of ultrasonic treatment on the structural characteristics of gluten protein and the quality of steamed bread with potato pulp

Physicochemical properties and microstructure of gluten protein, and the structural characteristics of steamed bread with 30 % potato pulp (SBPP) were investigated by ultrasonic treatments. Results showed that 400 W ultrasonic treatment significantly (P < 0.05) increased the combination of water and substrate in the dough with 30 % potato pulp (DPP). The contents of wet gluten, free sulfhydryl (SH), and disulfide bond (SS) were influenced by ultrasonic treatment. Moreover, UV-visible and fluorescence spectroscopy demonstrated that the conformation of gluten protein was changed by ultrasonic treatment (400 W). Fourier transform infrared (FT-IR) illustrated that the β-sheet content was significantly (P < 0.05) increased (42 %) after 400 W ultrasonic treatment, and the surface hydrophobicity of gluten protein in SBPP increased from 1225.37 (0 W ultrasonic treatment) to 4588.74 (400 W ultrasonic treatment). Ultrasonic treatment facilitated the generation of a continuous gluten network and stabilized crumb structure, further increased the specific volume and springiness of SBPP to 18.9 % and 6.9 %, respectively. Those findings suggested that ultrasonic treatment would be an efficient method to modify gluten protein and improve the quality of SBPP.

New research development on trans fatty acids in food: Biological effects, analytical methods, formation mechanism, and mitigating measures

The trans fatty acids (TFAs) in food are mainly generated from the ruminant animals (meat and milk) and processed oil or oil products. Excessive intake of TFAs (>1% of total energy intake) caused more than 500,000 deaths from coronary heart disease and increased heart disease risk by 21% and mortality by 28% around the world annually, which will be eliminated in industrially-produced trans fat from the global food supply by 2023. Herein, we aim to provide a comprehensive overview of the biological effects, analytical methods, formation and mitigation measures of TFAs in food. Especially, the research progress on the rapid, easy-to-use, and newly validated analytical methods, new formation mechanism, kinetics, possible mitigation mechanism, and new or improved mitigation measures are highlighted. We also offer perspectives on the challenges, opportunities, and new directions for future development, which will contribute to the advances in TFAs research.

Natural and low-caloric rebaudioside A as a substitute for dietary sugars: A comprehensive review

For health and safety concerns, traditional high-calorie sweeteners and artificial sweeteners are gradually replaced in food industries by natural and low-calorie sweeteners. As a natural and high-quality sugar substitute, steviol glycosides (SvGls) are continually scrutinized regarding their safety and application. Recently, the cultivation of organic stevia has been increasing in many parts of Europe and Asia, and it is obvious that there is a vast market for sugar substitutes in the future. Rebaudioside A, the main component of SvGls, is gradually accepted by consumers due to its safe, zero calories, clear, and sweet taste with no significant undesirable characteristics. Hence, it can be used in various foods or dietary supplements as a sweetener. In addition, rebaudioside A has been demonstrated to have many physiological functions, such as antihypertension, anti-diabetes, and anticaries. But so far, there are few comprehensive reviews of rebaudioside A. In this review article, we discuss the physicochemical properties, metabolic process, safety, regulatory, health benefits, and biosynthetic pathway of rebaudioside A and summarize the modification methods and state-of-the-art production and purification techniques of rebaudioside A. Furthermore, the current problems hindering the future production and application of rebaudioside A are analyzed, and suggestions are provided.

Effect of ultrasound pretreated hydrocolloid batters on quality attributes of fried chicken nuggets during post-fry holding

In this study, batters formulated with different hydrocolloids (i.e., pectin, locust bean gum, xanthan gum, guar gum, hydroxypropyl methylcellulose and methylcellulose) were treated with ultrasound as edible coatings for fried chicken nuggets. Quality characteristics (i.e., batter pickup, flow behaviours, thermal properties, moisture loss, color and textural properties) in chicken nuggets coated with ultrasound treated batters were evaluated before and after post frying exposure to heat lamp. Ultrasonication significantly reduced batter pickup, flow behavior and gelatinization enthalpy, revealing its tendency to alter functional properties of batter systems. Rheological evaluation of all batter samples revealed a pseudoplastic (shear thinning) flow characteristic when fitted to power law model, with ultrasonicated (US) samples exhibiting a significantreduction in viscosity over non-ultrasonicated (NUS) samples. Compared to the control NUS, fat content of chicken nuggets coated with US-treated batters decreased by 39.0, 60.9, 62.87, 64.1, 65.7, and 65.0 % for pectin, locust bean gum, xanthan gum, guar gum, hydroxypropyl methylcellulose and methylcellulose, respectively. Finally, chicken nuggets coated with US and NUS treated batters exhibited greater cutting force values immediately after frying but declined within the first 10 min of heat lamp exposure and increased subsequently with extended heat lamp holding time. Furthermore, NUS-treated guar gum resulted in chicken nuggets with the most minimal variability in cutting force during post-frying holding, indicating that crispiness was maintained. Overall, application of ultrasound as a batter pretreatment technique can be exploited by the frying food industry as an alternative approach to producing low fat chicken nuggets with appreciable quality attributes.

Phenolic Compounds Recovery from Blood Orange Peels Using a Novel Green Infrared Technology Ired-Irrad®, and Their Effect on the Inhibition of Aspergillus flavus Proliferation and Aflatoxin B1 Production

The intensification of total phenolic compound (TPC) extraction from blood orange peels was optimized using a novel green infrared-assisted extraction technique (IRAE, Ired-Irrad^®) and compared to the conventional extraction using a water bath (WB). Response surface methodology (RSM) allowed for the optimization of ethanol concentration (E), time (t), and temperature (T) in terms of extracted TPC and their antiradical activity, for both WB extraction and IRAE. Using WB extraction, the multiple response optimums as obtained after 4 h at 73 °C and using 79% ethanol/water were 1.67 g GAE/100 g for TPC and 59% as DPPH inhibition percentage. IRAE increased the extraction of TPC by 18% using 52% ethanol/water after less than 1 h at 79 °C. This novel technology has the advantage of being easily scalable for industrial usage. HPLC analysis showed that IRAE enhanced the recovery of gallic acid, resveratrol, quercetin, caffeic acid, and hesperidin. IR extracts exhibited high bioactivity by inhibiting the production of Aflatoxin B1 by 98.9%.

Research Progress on Nutritional Value, Preservation and Processing of Fish-A Review

The global population has rapidly expanded in the last few decades and is continuing to increase at a rapid pace. To meet this growing food demand fish is considered a balanced food source due to their high nutritious value and low cost. Fish are rich in well-balanced nutrients, a good source of polyunsaturated fatty acids and impose various health benefits. Furthermore, the most commonly used preservation technologies including cooling, freezing, super-chilling and chemical preservatives are discussed, which could prolong the shelf life. Non-thermal technologies such as pulsed electric field (PEF), fluorescence spectroscopy, hyperspectral imaging technique (HSI) and high-pressure processing (HPP) are used over thermal techniques in marine food industries for processing of most economical fish products in such a way as to meet consumer demands with minimal quality damage. Many by-products are produced as a result of processing techniques, which have caused serious environmental pollution. Therefore, highly advanced technologies to utilize these by-products for high-value-added product preparation for various applications are required. This review provides updated information on the nutritional value of fish, focusing on their preservation technologies to inhibit spoilage, improve shelf life, retard microbial and oxidative degradation while extending the new applications of non-thermal technologies, as well as reconsidering the values of by-products to obtain bioactive compounds that can be used as functional ingredients in pharmaceutical, cosmetics and food processing industries.

Comparison between the use of polyether ether ketone and stainless steel columns for ultrasonic-assisted extraction under various ultrasonic conditions

The ultrasound-assisted extraction (UAE) was conducted using the stainless steel (SS) and polyether ether ketone (PEEK) columns and analyzed with high-performance liquid chromatography (HPLC) to understand the mechanism of ultrasound-assisted chromatography (UAC). Empty SS and PEEK columns were used to extract dyes from a fabric under identical conditions with several parameters including the initial ultrasonic bath temperatures (30 °C and 40 °C), ultrasound power intensities (0, 20, 40, 60, 80, and 100 %), ultrasound operation modes (normal and sweep), and ultrasound frequencies (25 kHz, 40 kHz, and 132 kHz) to compare their extraction capabilities. After 30 min of extraction, the amount of extract was determined by HPLC. The PEEK material was significantly affected by ultrasonic radiation compared to the SS material, especially at a higher temperature (40 °C), power intensity (100 %), and frequency (132 kHz) with sweep mode. At a maximum power density of 45 W/L, the extraction effectiveness ratio of PEEK to SS was in the range of 1.8 - 3.9 depending on the specific frequency, initial temperature, and with or without temperature control. The most optimal ultrasound frequencies, in terms of enhancing extraction effectiveness, are in the order of 132 kHz, 40 kHz, and 25 kHz. Unlike the SS material, the PEEK material was more affected by temperature and acoustic effects under identical conditions, especially at 132 kHz ultrasound frequency. In contrast, at lower frequencies of 40 kHz and 25 kHz, no significant differences in the acoustic effects were observed between the PEEK and SS materials. The findings of this study contribute to elucidating the roles of column materials in UAE and UAC.