An efficient removal of RB5 from aqueous solution by adsorption onto nano-ZnO/Chitosan composite beads

Poly(vinyl alcohol) Embedded with Montmorillonite Clay and Nano Titania: A Scale-Up for Sustainable Environmental Remediation

A poly(vinyl alcohol)/montmorillonite/titania (PVA/MMT/TiO2) nanocomposite film was fabricated via a simple solution casting strategy for the removal of cationic as well as anionic dyes. The developed nanocomposite film was subjected to X-ray diffraction (XRD), Fourier transform Infrared (FTIR), thermogravimetric analysis, dynamic mechanical analysis (DMA), mechanical property evaluation, and scanning electron microscopy (SEM) analysis. The embedding of MMT and TiO2 nanoparticles onto a PVA matrix has been confirmed from XRD, FTIR, and SEM analysis. It has been found that the thermal and mechanical properties of virgin PVA have been significantly improved by embedding it with MMT and TiO2. The embedded system also exhibited excellent room-temperature storage modulus compared to the unfilled system, as revealed from DMA. By utilizing the adsorption characteristics of MMT and photocatalytic activity of TiO2, the developed PVA/MMT/TiO2 nanocomposite film was used for the removal of model dyes, viz, malachite green (MG), methylene blue (MB), and cotton blue (CB). The highest removal efficiency for cationic MG and MB was 99.99% and 99.79%, respectively, for 15 min of exposure time. The anionic CB showed a removal efficiency of 98.52%. The highlight of the work is that, since the adsorbent and photocatalyst are embedded onto a polymer matrix and made in the form of a film, we can easily recover the film from the solution after use, with no need of centrifugation and further purification strategies as in the case of powderous photocatalysts. Further, the PVA/MMT/TiO2 nanocomposite film exhibited excellent reusability of 10 cycles, which is a very high value in comparison with literature reports.

Ponceau 4R elimination from fruit juice: An integrated optimization strategy utilizing artificial neural networks, least squares, and chitosan-nickel ferrite Nano Sorbent

The goal of present work is to examine the efficiency of aminated-chitosan/NiFe2O4 nanoparticles (AmCs/NiFe2O4 NPs) produced for removing Ponceau 4R (P4R) from fruit juice through an adsorption process. The resulting nanoparticles were characterized using various techniques. The modeling of results was done using least squares (LS) and Radial basis function-artificial neural network (RBF-ANN). The optimum removal of P4R (91.43 %) was obtained at the following optimum conditions: pH 4.47, adsorbent dosage 0.047 g/L, contact time approximately 57.78 min, and initial concentration P4R 26.89 mg/L. The highest adsorption capacity (qm) was found to be 208.33 mg g-1. The P4R adsorption mostly followed the Freundlich and pseudo-second-order isotherm kinetic models. Both LS-based models and RBF-ANN provided good predictions for independent variables. The dye elimination efficacy for juice samples were approximately 90.34 %. Therefore, based on the obtained results, it can be claimed that the prepared AmCs/NiFe2O4 NPs can be used to remove P4R.

Cross-linked chitosan/pencil clay hybrid beads for the adsorption of reactive black 5

Chitosan (CH) and pencil clay (CL) were utilized to prepare stable epichlorohydrin cross-linked chitosan-clay hybrid beads (CCHB) for the adsorptive removal of anionic reactive black 5 (RB5) dye. Among various percentage weight ratios of chitosan/clay hybrid beads, 40 % CH-60 % CL was selected as the best adsorbent owing to its stability and removal efficiency. The pore properties of CCHB in terms of surface area, total pore volume, and average pore width were 40.33 m2/g, 0.088 cm3/g, and 86.06 Å, respectively. The adsorption behavior of RB5 on CCHB followed Langmuir and pseudo-second-order models. Thermodynamic parameters confirm the endothermic and spontaneous nature of RB5 adsorption and the regeneration studies reveal a negligible decrease in removal efficiency of CCHB after 5 adsorption-desorption cycles. The CCHB exhibited adsorption capacities of 169.49, 200.00, and 227.27 mg/g for RB5, respectively, at 30, 40, and 50 °C. The prepared chitosan-clay hybrid bead adsorbent can be efficiently applied for anionic wastewater treatment.

Cellulose-citric acid-chitosan@metal sulfide nanocomposites: Methyl orange dye removal and antibacterial activity

In this study, to develop efficient adsorbents in removing water pollution, new cellulose-citric acid-chitosan@metal sulfide nanocomposites (CL-CA-CS@NiS and CL-CA-CS@CuS) were synthesized by one-pot reaction at mild conditions and characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), Energy Dispersive X-ray (EDX) and Brunauer-Emmett-Teller (BET) isotherm. The results of characterization techniques confirm that the desired compounds have been successfully synthesized. The as-prepared composites were applied for the removal of methyl orange (MO) dye from aqueous solutions using a batch technique, and the effect of key factors such as initial pH, shaking time, MO concentration, temperature and adsorbent dose were investigated and discussed. Adsorption results exhibited positive impact of temperature, shaking time and adsorbent dose on the MO removal percent. The MO removal percent has been increased over a wide range of pH from 2 (27.6 %) to 6 (98.8 %). Also, almost being constant over a wide range of MO concentration (10-70 mg/L). The results demonstrated that the maximum removal percentage of MO dye (98.9 % and 93.4 % using CL-CA-CS@NiS and CL-CA-CS@CuS, respectively) was achieved under the conditions of pH 6, shaking time of 120 min, adsorbent dose of 0.02 g, MO concentration of 70 mg/L and temperature of 35 °C. The pseudo-second-order (PSO) and Langmuir models demonstrated the best fit to the kinetic and equilibrium data. Also, the thermodynamic results showed that the MO removal process is endothermic and spontaneous in nature. The MO adsorption can be happened by different electrostatic attraction, n-π and π-π stacking and also hydrogen bonding interaction. In addition, antibacterial activity of CL-CA-CS@NiS and CL-CA-CS@CuS nanocomposites exhibited a superior efficiency against S. aureus.

Innovative biopolyelectrolytes-based technologies for wastewater treatment

Developing eco-friendly, cost-effective, and efficient methods for treating water pollutants has become paramount in recent years. Biopolyelectrolytes (BPEs), comprising natural polymers like chitosan, alginate, and cellulose, have emerged as versatile tools in this pursuit. This review offers a comprehensive exploration of the diverse roles of BPEs in combating water contamination, spanning coagulation-flocculation, adsorption, and filtration membrane techniques. With ionizable functional groups, BPEs exhibit promise in removing heavy metals, dyes, and various pollutants. Studies showcase the efficacy of chitosan, alginate, and pectin in achieving notable removal rates. BPEs efficiently adsorb heavy metal ions, dyes, and pesticides, leveraging robust adsorption capacity and exceptional mechanical properties. Furthermore, BPEs play a pivotal role in filtration membrane techniques, offering efficient separation systems with high removal rates and low energy consumption. Despite challenges related to production costs and property variability, their environmentally friendly, biodegradable, renewable, and recyclable nature positions BPEs as compelling candidates for sustainable water treatment technologies. This review delves deeper into BPEs' modification and integration with other materials; these natural polymers hold substantial promise in revolutionizing the landscape of water treatment technologies, offering eco-conscious solutions to address the pressing global issue of water pollution.

Novel Chitosan-ZnO nanocomposites derived from Nymphaeaceae fronds for highly efficient removal of Reactive Blue 19, Reactive Orange 16, and Congo Red dyes

The primary aim of this investigation was to synthesise novel adsorbent by incorporating greenly synthesized zinc oxide nanoparticles into chitosan matrix (G-ZnO-Cs). The production of ZnO Nanoparticles via a green approach involved the utilization of extracts derived from Nymphaeaceae fronds. This assertion was substantiated by the application of Field Emission Scanning Electron Microscopy (FESEM) and X-ray Diffraction (XRD) analytical techniques. Several Analytical methods such as Fourier Transform Infrared spectroscopy (FT-IR), Energy Dispersive X-ray Analysis (EDAX), FESEM, Thermogravimetric Analysis (TGA), XRD, Brunauer-Emmett-Teller (BET) analysis, and point-of-zero charge determination were used to characterize G-ZnO-Cs. Further study investigates the impact of five key processing parameters, namely pH, interaction duration, G-ZnO-Cs dosage, temperature, and initial concentration of dyes, on the removal of three organic dyes Reactive Blue 19 (RB 19), Reactive Orange 16 (RO 16), and Congo Red (CR) The adsorption process of Reactive Blue 19 (RB 19), Reactive Orange 16 (RO 16), and Congo Red (CR) dyes on G-ZnO-Cs were determined to comply to the pseudo-second-order (PSO) and Langmuir models, as determined through equilibrium and kinetic experiments. The highest adsorption capabilities for RB 19, RO 16 and CR dye were revealed to be 219.6 mg/g, 129.6 mg/g, and 118.8 mg/g, respectively. The elimination success rate of the fixed-bed column approach for treating huge volumes was highlighted in the conducted research. Moreover, the G-ZnO-Cs composite exhibited significant reusability due to its ability to undergo elution and simultaneous regeneration processes.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

Glutaraldehyde and terephthaldehyde-crosslinked chitosan for cationic and anionic dyes removal from aqueous solutions: Experimental, DFT, kinetic and thermodynamic studies

Novel chitosan polymers were synthesized using two cross-linkers, Glutaraldehyde and Terephthaldehyde, to enhance stability and efficiency. Characterization techniques (XRD, FTIR, FE-SEM, TGA, DTG, BJH, and BET) confirmed successful synthesis. These polymers were employed as adsorbents for removing Malachite Green (MG) and Congo Red (CR) dyes from water. Batch experiments and DFT calculations investigated the adsorption process, thermodynamics, and kinetics. Results showed the CSGT-III polymer achieved the highest removal efficiency. For initial dye concentrations ([CR]o = 50 mg/L, [MG]o = 20 mg/L) and adsorbent doses (0.8 g/L for CR, 0.4 g/L for MG), removal efficiencies were 96.99 % for CR and 99.07 % for MG. Thermodynamic analysis confirmed the spontaneous nature of adsorption, and the process was endothermic for both dyes. The Langmuir model fitted adsorption isotherms well, indicating a homogeneous surface. Kinetic analysis revealed a pseudo-second-order model for both dyes.

Recent developments in chitosan based microgels and their hybrids

Chitosan based microgels have gained great attention because of their chemical stability, biocompatibility, easy functionalization and potential uses in numerous fields. Production, properties, characterization and applications of chitosan based microgels have been systematically reviewed in this article. Some of these systems exhibit responsive behavior towards external stimuli like pH, light, temperature, glucose, etc. in terms of swelling/deswelling in an aqueous medium depending upon the functionalities present in the network which makes them a potential candidate for various applications in the fields of biomedicine, agriculture, catalysis, sensing and nanotechnology. Current research development and critical overview in this field accompanying by future possibilities is presented. The discussion is concluded with recommended possible future works for further progress in this field.

Modeling sunset yellow removal from fruit juice samples by a novel chitosan-nickel ferrite nano sorbent

Analysis of food additives is highly significant in the food industry and directly related to human health. This investigation into the removal efficiency of sunset yellow as an azo dye in fruit juices using Chitosan-nickel ferrite nanoparticles (Cs@NiFe2O4 NPs). The nanoparticles were synthesized and characterized using various techniques. The effective parameters for removing sunset yellow were optimized using the response surface methodology (RSM) based on the central composite design (CCD). Under the optimum conditions, the highest removal efficiency (94.90%) was obtained for the initial dye concentration of 26.48 mg L-1 at a pH of 3.87, a reaction time of 67.62 min, and a nanoparticle dose of 0.038 g L-1. The pseudo-second-order kinetic model had a better fit for experimental data (R2 = 0.98) than the other kinetic models. The equilibrium adsorption process followed the Freundlich isotherm model with a maximum adsorption capacity of 212.766 mg g-1. The dye removal efficiency achieved for industrial and traditional fruit juice samples (91.75% and 93.24%), respectively, confirmed the method's performance, feasibility, and efficiency. The dye adsorption efficiency showed no significant decrease after five recycling, indicating that the sorbent has suitable stability in practical applications. variousThe synthesized nanoparticles can be suggested as an efficient sorbent to remove the sunset yellow dye from food products.

Synthesis and characterization of a novel magnetic chitosan-nickel ferrite nanocomposite for antibacterial and antioxidant properties

A novel nanomagnet modified with nickel ferrite nanoparticles (NPs) coated with hybrid chitosan (Cs-NiFe2O4) was synthesized using the co-precipitation method. The resulting nanomagnets were characterized using various techniques. The size of the nanomagnetic particles was estimated to be about 40 nm based on the transmission electron microscopy (TEM) image and X-ray diffraction analysis (XRD) pattern (using the Debye-Scherrer equation). Scanning electron microscopy (SEM) images indicated that the surface of Cs-NiFe2O4 NPs is flatter and smoother than the uncoated NiFe2O4 NPs. According to value stream mapping (VSM) analysis, the magnetization value of Cs-NiFe2O4 NPs (17.34 emu/g) was significantly lower than NiFe2O4 NPs (40.67 emu/g). The Cs-NiFe2O4 NPs indicated higher antibacterial properties than NiFe2O4 NPs and Cs. The minimum inhibitory concentrations of Cs-NiFe2O4 NPs against S. aureus and E. coli were 128 and 256 mg/mL, respectively. Antioxidant activity (evaluated by 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging test) for NiFe2O4 NPs and Cs-NiFe2O4 NPs at the concentration of 100 µg/mL were 35% and 42%, respectively. Consequently, the synthesized Cs-NiFe2O4 NPs can be proposed as a viable material for biomedical applications.

Synthesis and characterization of pendant N,N-dimethylaminobenzaldehyde-functionalized chitosan Schiff base composite (CS@MABA) as a new sorbent for removal of Pb(II) ions from aqueous media

In this work, new pendant N,N-dimethylaminobenzaldehyde-functionalized chitosan Schiff base composite (CS@MABA) was prepared from the simple and convenient condensation reaction between chitosan (CS) and N,N-dimethylaminobenzaldehyde (MABA) in ethanol-glacial acetic acid (1:1 v/v) and characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscope (SEM). The as-prepared composite CS@MABA was applied for the removal of Pb(II) ions, due to the presence of imine, hydroxyl and phenyl groups, and the effects of important parameters such as solution pH, contact time and sorbent dosage on the removal percentage and adsorption capacity were investigated and discussed. The optimum conditions were found to be at pH 5, adsorbent dosage of 0.1 g, Pb(II) concentration of 50 mg/L and contact time of 60 min. The maximum Pb(II) removal percentage was found to be 94.28 % with the high adsorption capacity of 165 mg/g. The adsorption capacity of CS@MABA is remain 87 % after 5 adsorption-desorption cycles. The adsorption kinetic and isotherm studies indicated that the Pb(II) removal by CS@MABA follows a pseudo-first order and Langmuir models, respectively. Compared to similar compounds, the synthesized CS@MABA composite has shown a relatively high yield for removing Pb(II) ions. According to these results, the CS@MABA suggested for the sorption of other heavy metals.

Non-toxic chitosan-pyrazole adsorbent enriched with greenly synthesized zinc oxide nanoparticles for dye removal from wastewater

The limited usage of chitosan as a dye adsorbent is attributed to its compact structure and low swelling ability, despite its exceptional properties. The present study aimed to prepare novel chitosan/pyrazole Schiff base (ChS) adsorbents enriched with greenly synthesized zinc oxide nanoparticles. The preparation of ZnO-NPs was carried out through a green approach using the Coriandrum sativum extract. The presence of ZnO-NPs at the nanoscale was validated through TEM, DLS and XRD analyses. FTIR, ¹H NMR confirmed the successful preparation of the Schiff base and its ZnO-NPs adsorbents. The incorporation of ZnO-NPs improved the thermal, swelling and antimicrobial properties of the chitosan Schiff base. In addition, a significant improvement in the adsorption of Maxilon Blue dye from its aqueous solution by the Schiff base/ZnO-NPs adsorbent. The prepared ChS/ZnO-NPs adsorbent has the potential to be used as an alternative to conventional adsorbents for the removal of dyes from wastewater.

Developing nano-micro size chitosan beads using imidazolium-based ionic liquid: A perspective

The aggressive search for unique materials in recent years has put forward chitosan and modified-chitosan as materials with unique structural and morphological characteristics for various important applications. Just as imidazolium-based ionic liquids are the commonly applied ionic liquids (ILs) type for chitosan modifications for various applications, their further modifications into beads for enhancing their properties is now gaining most attention. However, most of the currently prepared imidazolium ILs modified-chitosan beads are not in nano size due to preparation difficulties. In response to this and referencing the research works in the literature, the possible breakthrough directions including synthesis routes, and physical and mechanical transformation processes are proposed. These procedures are expected to provide certain theoretical and empirical basis, as well as technical guide for developing nano-micro size chitosan beads using imidazolium based ILs.

Synthesis of 2D Metal-Organic Nanosheets (MONs) by Liquid Phase Exfoliation: Applications in Effective Delivery of Antiulcer Drugs and Selective Adsorption and Removal of Cationic Dyes

Nowadays, the fabrication of 2D metal-organic nanosheets (2D MONs) has entered the research arena fascinating researchers worldwide. However, a lack of efficient and facile methods has remained a bottleneck for the manufacturing of these 2D MONs. Herein, a 2D metal-organic framework (MOF), i.e., 2D Cu-MOF, was synthesized using a facile and convenient stirring method by using 4,4'-trimethylenedipyridine (TMDP) as an organic linker. The as-prepared MOF was characterized in detail and based on single crystal X-ray diffraction analysis, it was established that tangled layers in the 2D Cu-MOF are interconnected to produce thick strands. These tangled layers could be easily separated via ultrasonication-induced liquid phase exfoliation (UILPE) to give the 2D Cu-MON as illustrated through Tyndall light scattering and exhaustive microscopic exploration such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The application of this 2D Cu-MON was assessed in the field of drug delivery revealing exceptional drug loading for the drug lansoprazole (LPZ) by 2D Cu-MONs as well as drug release in the acidic and neutral medium demonstrating that the 2D Cu-MON is an excellent carrier for antiulcer drug delivery. For environmental protection, the application of 2D Cu-MON was also examined toward the removal of various cationic and anionic dyes with excellent selectivity toward cationic dye removal. The plausible mechanism for dye removal indicated the involvement of cation-π and π-π interactions, for the effective adsorption of cationic dyes as well as a increase in the surface area of 2D Cu-MON by UILPE. Remarkably, the high drug loading and dye removal are imputed to the increase in surface area by UILPE. In a nutshell, the developed 2D Cu-MON will prove to be beneficial for application in the field of drug delivery as well as for wastewater treatment.

In situ anchoring of iron and zinc oxides nanoparticles onto rice husk cellulose for efficient wastewater remediation

The development of effective and economical technologies for the treatment of contaminated wastewater has been of great significance to researchers. Therefore, an equal molar ratio of iron and zinc oxides nanoparticles was hydrothermally immobilized on the cellulose fibers of rice husk. Using XRD, SEM, FTIR, EDX, TEM, VSM, BET, and TGA/DTG, the structure, and characteristics of Cel/α-Fe₂O₃-ZnO, a ternary nanocomposite, were affirmed. The nanocomposite displayed a mesoporous structure with a substantial surface area. The efficiency of nanocomposite as a new adsorbent has been studied for the extraction of reactive black 5 (RB5), which is a diazo-anionic dye from simulated wastewater. The medium's pH was the dominant factor of RB5 adsorption, and the optimal removal effectiveness was acquired at pH 2. The adsorption values of RB5 correspond to second-order kinetics. They also matched Langmuir with a maximum capacity of 99.30 mg g^-1. For real industrial wastewater, Cel/α-Fe₂O₃-ZnO has successfully reduced a number of major pollutants, including ammonia (92.73 %), color (92.88 %), COD (91.53 %), BOD₅ (84.97 %), TSS (96.27 %), TP (52.17 %) and TN (47.23 %). These results illustrate the effective application of the ternary nanocomposite in wastewater treatment.

A comprehensive review on the metal-based green valorized nanocomposite for the remediation of emerging colored organic waste

In today's era, "green" synthesis is an emerging research trend. It has gained widespread attention owing to its dynamic behavior, reliability, simplicity, sustainability, and environment friendly approach for fabricating various nanomaterials. Green fabrication of metal/metal oxides nanomaterials, hybrid materials, and other metal-based nanocomposite can be utilized to remove toxic colored aqueous pollutants. Nanomaterials synthesized by using green approach is considered to be the significant tool to minimize unwanted or harmful by-products otherwise released from traditional synthesis methods. Various kinds of biosynthesized nanomaterials, such as animal waste and plant-based, have been successfully applied and well documented in the literature. However, their application part, especially for the cure of colored organic polluted water, has not been reported as a single review article. Therefore, the current work aims to assemble reports on using novel biosynthesized green metal-based nanomaterials to exclude harmful dyes from polluted water.

A review on remediation of dye adulterated system by ecologically innocuous "biopolymers/natural gums-based composites"

The mitigation of wastewater exploiting biopolymers/natural gums-based composites is an appealing research theme in today's scenario. The following review presents a comprehensive description of the polysaccharides derived from biopolymers (chitosan, collagen, cellulose, starch, pectin, lignin, and alginate) and natural gums (guar, gellan, carrageenan, karaya, moringa oliefera, tragacanth, and xanthan gum). These biopolymers/natural gums-based composites depicted excellent surface functionality, non-toxicity, economic and environmental viability, which corroborated them as potential candidates in the decontamination process. The presence of -OH, -COOH, and -NH functional groups in their backbone rendered them tailorable for modification/functionalization, and anchor an array of pollutants via electrostatic interaction, hydrogen bonding, and Van der Waals forces. Further, due to these functional moieties, these bio-based composites revealed an excellent adsorption capacity than conventional adsorbents. This review provides an overview of the classification of biopolymers/natural gums based on their origin, different ways of their modification, and the remediation of dye-contaminated aqueous environments employing diverse bio-based adsorbents. The isotherm, kinetic modelling along with thermodynamics of the adsorption process is discussed. Additionally, the reusable efficacy of these bio-adsorbents is reviewed.

Synthesis and Structure of a Copper-Based Functional Network for Efficient Organic Dye Adsorption

In the work, by incorporating polyoxometalates (POMs) into a copper(II)-based network, a novel three-dimensional (3D) porous framework, [Cu₁₇Cl₃(trz)₁₂]H₃[GaW₁₂O₄₀]·9H₂O (Cu-GaW-TRZ), was successfully prepared and explored for the adsorption of dyes. The adsorption capacity of Cu-GaW-TRZ was calculated as 13.11 mg/g, and the dye adsorption rate equaled 96.2% for the adsorption of methylene blue (MB). Furthermore, this recyclable adsorbent is stable enough without obvious loss of adsorption capacity for at least five runs. Meanwhile, the structure of the macropores is suitable for the entry of large molecular dyes, and [GaW₁₂O₄₀]^5- also can achieve efficient adsorption for cationic dyes. The results displayed a pseudo-second-order kinetic model and were well matched for MB adsorption onto Cu-GaW-TRZ. The free energy, entropy, and enthalpy of the thermodynamic parameters for the adsorption of MB were calculated, which revealed that the adsorption process was befitting for the adsorption of MB.

Synergistic sorption performance of karaya gum crosslink poly(acrylamide-co-acrylonitrile) @ metal nanoparticle for organic pollutants

In this work, we tailor facile hydrogels nanocomposite (HNC) based on sustainable karaya gum for water treatment. Karaya gum crosslink poly(acrylamide-co-acrylonitrile) @ silver nanoparticle (KG-cl-P(AAm-co-AN)@AgNPs) HNC were made by an aqueous free radical in situ crosslink copolymerization of acrylamide (AAm) and acrylic acid (AA) in aqueous solution of KG-stabilized AgNPs. FTIR, XRD, DTA-TGA, SEM, and TEM were used to characterize HNC. The hydrogels' swelling, diffusion, and network characteristics were investigated. The removal efficiency of HNC was found to be 99% at pH 8 for a crystal violet (CV), dose of 0.02 g after 1 h. Dye adsorption by these hydrogels was also investigated in terms of isotherms, and kinetics. The dye's exceptionally high adsorption capacity on HNC for CV removal is explained by H-bonding interactions, as well as dipole-dipole and electrostatic interactions between anionic adsorbent and cationic dye molecules (Qmax, 1000 mg/g). The HNC can be regenerated with 0.1 M HCl and reused at least 10 times maintaining over 68% dye removal. The loading of AgNPs into the polymeric matrix of KG-cl-P(AAm-co-AN) significantly increases the removal percentage of CV dye from its aqueous solution, according to this study.

Preparation of new bio-based chitosan/Fe2O3/NiFe2O4 as an efficient removal of methyl green from aqueous solution

Modified chitosan with various functional groups has high potential as an efficient adsorbent in removing water pollution. In this study, new magnetic adsorbent, bio-based chitosan/Fe2O3/NiFe2O4, was successfully prepared by green chemistry route involving mixing of chitosan as core moiety and Fe2O3/NiFe2O4 nanocomposite, and slow evaporation of solvent. Synthesized chitosan/Fe2O3/NiFe2O4 was characterized by FT-IR, TGA, XRD, VSM and FE-SEM. The FT-IR and XRD results confirmed that the successful preparation of chitosan/Fe2O3/NiFe2O4. Uniform dispersion of Fe2O3/NiFe2O4 nanoparticles with low aggregation was confirmed by FE-SEM. The as-prepared magnetic chitosan/Fe2O3/NiFe2O4 was developed as solid phase adsorbent to remove methyl green (MG) dye from aqueous solutions. Several important parameters such as contact time, pH, temperature and adsorbent dosage were investigated systematically. The high and fast MG dye removal (≈ 80%) occurs after 30 min. The optimal conditions for MG removal was recorded at pH = 8, contact time of 60 min, adsorbent dosage of 0.2 g and 25 °C and displayed a high MG dye removal percentage of 96.51% and adsorption capacity of 77.22 mg/g.

Efficient removal of Pb(II) using modified chitosan Schiff base@Fe/NiFe

A novel modified chitosan Schiff base@Fe₂O₃-NiFe₂O₄ (CsSB@Fe/NiFe) was prepared and characterized using FT-IR, XRD, SEM, EDX, TGA, DSC and VSM. FT-IR and XRD results confirm that the nanoparticles of Fe/NiFe distributed throughout the surface of CS-OH and successfully prepared CsSB@Fe/NiFe. SEM image shows that the Fe/NiFe nanoparticles were assembled in the surface and inside of CS-OH. Coercivity (H_c) of CsSB@Fe/NiFe is ≈ 110 Oe, indicated that it was kind of soft-magnetic materials with saturation magnetization (M_s) of 6.45 emu/g. In addition, CsSB@Fe/NiFe was further explored as an new sorbent for the removal of Pb(II) ion from aqueous solution and the influence of various important parameters such as solution pH, contact time, dosage of adsorbent and initial Pb(II) concentration were studied and optimized. Optimum conditions for Pb(II) removal were found to be pH 5, adsorbent dosage 0.05 g, initial Pb(II) concentration of 75 ppm and contact time of 120 min. The maximum Pb(II) removal percentage was found to be 97%. Also, CsSB@Fe/NiFe shows about 88% Pb(II) removal after five adsorption-desorption cycles. The results suggested that the sorption of Pb(II) onto CsSB@Fe/NiFe was feasible and spontaneous.

The hydroxyl radical yields prediction of cavitation bubble clouds during hydrodynamic cavitation process for chitosan degradation

In order to measure the influence of chemical effects in the process of hydrodynamic cavitation (HC) degradation of chitosan, a prediction model for the hydroxyl radical (·OH) yields of cavitation...

New chitosan Schiff base and its nanocomposite: Removal of methyl green from aqueous solution and its antibacterial activities

New chitosan Schiff base (CS-NB) and its CS-NB-NiFe nanocomposite have been prepared and characterized by FTIR spectroscopy, XRD, SEM and DSC. FT-IR spectra and XRD patterns revealed the preparation of chitosan Schiff base CS-NB and its CS-NB-NiFe nanocomposite. DSC demonstrated the endo and exothermic correspondence the evaporation of solvent and decomposition of pyranose ring, respectively. Antibacterial activities was evaluated for the as-prepared compounds against two Gram-positive (Staphylococcus aureus and Bacillus cereus) and two Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria and the results shows that the antibacterial activities of the compounds are found to be stronger than that of chitosan. The order of antibacterial effect according to inhibitory zone around is as follows: S. aureus > E. coli > B. cereus > P. aeruginosa. In addition, the removal of methyl green (MG) dye using CS-NB and its CS-NB-NiFe nanocomposite were analyzed and results showed that the compounds can be effectively used to remove of MG from aqueous solution. Results show that the percentage removal of MG by nanocomposite is higher than Schiff base.

Biodegradable Chitosan Films with ZnO Nanoparticles Synthesized Using Food Industry By-Products—Production and Characterization

This work aimed to produce bionanocomposites of chitosan incorporated with zinc oxide nanoparticles (ZnO NPs) synthesized using food industry by-products and to characterize them. Such nanoparticles are highlighted due to their low cost, antimicrobial activity, accessibility, and sustainability synthesis. Four different levels of ZnO NPs (0, 0.5, 1.0, and 2.0% w/w of chitosan) were tested, and the bionanocomposites were characterized in terms of their hydrophobicity, mechanical, optical, and barrier properties. Overall, the incorporation of ZnO NPs changed the composites from brittle to ductile, with enhanced elongation at break and reduced Young Modulus and tensile strength. Thus, ZnO NPs acted as plasticizer, turning the films more flexible, due to the presence of organic compounds on the NPs. This also favored permeability of oxygen and of water vapor, but the good barrier properties were maintained. Optical properties did not change statistically with the ZnO NPs incorporation. Thus, the characterization presented in this paper may contribute to support a decision on the choice of the material’s final application.

Experimentally and theoretically approaches for disperse red 60 dye adsorption on novel quaternary nanocomposites

A comprehensive study that combined both experimental and computational experiments was performed to evaluate the usage of organo-metal oxide nanocomposite for the elimination of disperse red 60 dye (DR) from aqueous solutions. Chitosan was modified by Schiff base to form nanoneedles chitosan-4-chloroacetophenone derivative. The derivatives were then impregnated with CeO₂–CuO–Fe₂O₃ or CeO₂–CuO–Al₂O₃ metal oxides to prepare a novel quarternary organo-metal oxide nanocomposite. The novel nanocomposite, chitosan-4-chloroacetophenone/CeO₂–CuO–Fe₂O₃ (CF) and chitosan-4-chloroacetophenone/CeO₂–CuO–Al₂O₃ (CA) are cheap and effective nano adsorbents that can be used for the uptake of DR from aqueous solution. The CF and CA nano-composites were characterized using different techniques. Moreover, the effect of adsorption parameters (initial DR concentration, time of contact, pH, temperature, and adsorbent mass) as well as CA and CF reusability tests were performed. Langmuir adsorption isotherm and pseudo-second-order kinetics models were best fitted with the adsorption process. The maximum amount of DR adsorbed was 100 mg/g on CF and CA at pH 2 and 4, respectively with a physical spontaneous, and exothermic adsorption process. Monte Carlo (MC) simulation studies indicated the adsorption of DR molecule on the CF and CA surfaces following a parallel mode in most of all studied configurations, confirming the strong interactions between the DR and surfaces atoms of CF and CA. The molecular structure analysis of DR dye adsorbed on the surface of CF and CA indicated that the adsorption process related to Van der Waals dispersion force. Consequently, this helps to trap DR dye molecules on the surface of CF and CA (i.e., physical adsorption), which supports our experimental results.

Facile production of three-dimensional chitosan fiber embedded with zinc oxide as recoverable photocatalyst for organic dye degradation

Herein we report on a facile and green strategy for continuous production of chitosan-zinc oxide fibers and then compare their photodegradation performance against three organic dyes (i.e., methylene blue (MB), methyl orange (MO) and Rhodamine B, respectively) under different lights. Chitosan-zinc hydrogel fibers (CS/Zn) with different zinc loadings are obtained by direct mixing of chitosan and zinc acetate solutions using a double-syringe injection device. The as-prepared CS/Zn fibers are then immersed into glutaraldehyde (GA) and sodium hydroxide solutions, respectively, and dried at T = 50 °C. The resultant CS/ZnO/GA fibers of ca. 617 μm in diameter are characterized using X-ray diffraction (XRD), thermogravimetric analysis and field emission scanning electron microscope (FE-SEM). XRD and FE-SEM data confirm that the CS/ZnO/GA fibers consist of a large amount of hexagonal wurtzite ZnO nanorods up to 550 nm in length, and exhibit three-dimensional interconnected macroporous architecture. Photodegradation results clearly show that the CS/ZnO/GA fibers are effective for the removal of organic dyes upon UV irradiation and can be easily recovered and reused for at least 6 consecutive cycles. Unlike most reported CS/ZnO nanocomposites, the current CS/ZnO/GA fiber shows a higher adsorption of cationic MB rather than anionic MO, the mechanism of which is proposed.

Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Synthesis of new chitosan Schiff base and its Fe2O3 nanocomposite: Evaluation of methyl orange removal and antibacterial activity

New chitosan Schiff base (3EtO-4OH/Chit) and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite were synthesized and characterized by FTIR, ¹H NMR, XRD, TGA, DSC and SEM. The result confirmed the preparation of 3EtO-4OH/Chit and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite. The efficiency of the prepared catalysts was studied for the methyl orange (MO) removal from aqueous solution. The effect of adsorbent dose and contact time on the removal of dye has been studied. Their antibacterial activities were considered against two Gram positive (S. aureus and B. cereus) and two Gram negative (E. coli and P. aeruginosa) bacteria and the results showed that the activity of the 3EtO-4OH/Chit/Fe₂O₃ is excellent and is more than chitosan and 3EtO-4OH/Chit. Thermogravimetry studies shows that the weight loss stages and the residual value at 600 °C are different for the two compounds. DSC curve of the title compounds 3EtO-4OH/Chit and 3EtO-4OH/Chit/Fe₂O₃ is different from each other. The reason for this difference could be due to the presence of iron oxide nanoparticles in 3EtO-4OH/Chit/Fe₂O₃.

Synthesis and Characterization of Fe-TiO2 Nanomaterial: Performance Evaluation for RB5 Decolorization and In Vitro Antibacterial Studies

A photocatalytic system for decolorization of double azo reactive black 5 (RB5) dye and water disinfection of E. coli was developed. Sol gel method was employed for the synthesis of Fe-TiO₂ photocatalysts and were characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS) and Brunauer–Emmett–Teller (BET) analysis. Results showed that photocatalytic efficiency was greatly influenced by 0.1 weight percent iron loading and 300 °C calcination temperature. The optimized reaction parameters were found to be the ambient temperature, working solution pH 6.2 and 1 mg g⁻¹ dose to completely decolorize RB5. The isotherm studies showed that RB5 adsorption by Fe-TiO₂ followed the Langmuir isotherm with maximum adsorption capacity of 42.7 mg g⁻¹ and K_ads 0.0079 L mg⁻¹. Under illumination, the modified photocatalytic material had higher decolorization efficiency as compared to unmodified photocatalyst. Kinetic studies of the modified material under visible light irradiation indicated the reaction followed the pseudo-first-order kinetics. The illumination reaction followed the Langmuir-Hinshelwood (L-H) model as the rate of dye decolorization increased with an incremental increase in dye concentration. The L-H constant K_c was 1.5542 mg L^–1∙h^–1 while K_ads was found 0.1317 L mg^–1. The best photocatalyst showed prominent percent reduction of E. coli in 120 min. Finally, 0.1Fe-TiO₂-300 could be an efficient photocatalyst and can provide a composite solution for RB5 decolorization and bacterial strain inhibition.

Engineered Fe3 triangle for the rapid and selective removal of aromatic cationic pollutants: complexity is not a necessity

In this study, a low-cost oxo-bridged {Fe3} triangular cluster was constructed based on a benzoate ligand via slow evaporation. The cluster was thoroughly characterized by FTIR and UV-visible spectroscopy, TGA, and PXRD, and the exact structure was elucidated by single-crystal XRD. The formation of C-H⋯π and π-π interactions is responsible for the extra stability of {Fe3} clusters, which further enhances the dye adsorption property. The dye adsorption experiments performed on cationic [methylene blue (MB) and rhodamine-B (Rh-B)] as well as anionic [methyl orange (MO) and congo red (CR)] dyes revealed the ultimate selectivity of the present cluster towards the cationic ones. The {Fe3} cluster exclusively adsorbs the cationic dyes, i.e., MB and Rh-B even in the presence of anionic dyes, i.e., CR and MO. The extra stability, reusability and high efficiency of the {Fe3} molecular ensemble make it an attractive and fascinating material of importance. The kinetics analysis was evaluated employing different kinetics models. Furthermore, the plausible adsorption mechanism was also proposed, which suggests the interplay of cation-π and π-π interactions consolidating the efficient adsorption. Thus, the present work opens new doors for coordination chemists to further tune the structural features to modulate the adsorption/separation capacities of simple low-cost clusters for environmental protection for future efforts.

Performance Evaluation and Optimization of Dyes Removal using Rice Bran-Based Magnetic Composite Adsorbent

Although several studies have explored green adsorbent synthesized from many types of agriculture waste, this study represents the first attempt to prepare an environmentally friendly rice bran/SnO₂/Fe₃O₄-based absorbent with economic viability and material reusability, for the promotion of sustainable development. Here, rice bran/SnO₂/Fe₃O₄ composites were successfully synthesized and applied for adsorption of reactive blue 4 (RB4) and crystal violet (CV) dyes in aqueous solutions. The adsorption data were well-fitted by the Langmuir isotherm model and the pseudo-second-order kinetic model. The maximum adsorption capacities of the RB4 and CV dyes as indicated by the Langmuir isotherm model were 218.82 and 159.24 mg/g, respectively. As results of response surface methodology (RSM) showed, the quadratic model was appropriate to predict the performance of RB4 dye removal. The findings exhibited that an optimum removal rate of 98% was achieved at 60 °C for pH 2.93 and adsorption time of 360 min. Comparative evaluation of different agricultural wastes indicated that the rice bran/SnO₂/Fe₃O₄ composite appeared to be a highly promising material in terms of regeneration and reusability, and showed that the composite is a potential adsorbent for dye removal from aqueous solutions. Overall, the study results clearly suggest that an adsorbent synthesized from rice bran/SnO₂/Fe₃O₄ magnetic particle composites provides encouraging adsorption capacity for practical applications for environmental prevention.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal

Three-dimensional (3D) printing technique has received exceptional global attention as it can create a myriad of high-resolution architectures from digital models. In the present study, 3D-printed metal-organic frameworks (MOFs) were shaped into several geometries via direct ink writing, which overcomes the instability and high-pressure drop of powdery MOF during the flow of gas or liquid streams. The inclusion of a blend of calcium alginate and gelatin (CA-GE) as biocompatible binder allowed for easy writing and an enhanced mechanical property. Besides, it was found that the printing geometry (square, hexagon, and circle), MOF loading amount, and MOF size also greatly influenced the adsorptive performance. For instance, the methylene blue adsorption efficiency of CA-GE scaffolds without MOF was only 43.6%, while the printed MOF/CA-GE sample exhibited 99.8% adsorption efficiency at 20 min. Both the inherent microporous structure of MOFs and meso/macroporous structures of the 3D matrix contributed to the excellent adsorption properties towards a variety of organic dyes and their mixtures. Furthermore, the 3D-printed adsorbents can be easily regenerated in dilute acid solution and reused for at least 7 times without performance loss. In contrast, the powdery MOF can only be repeatedly used for at most 2 times.

In Situ Synthesis and Characterization of ZnO/Chitosan Nanocomposite as an Adsorbent for Removal of Congo Red from Aqueous Solution

ZnO/chitosan nanocomposite was successfully synthesized by in-situ precipitation method. The material was characterized by XRD, FESEM, TEM, FTIR, BET, and TGA. Results show that ZnO/chitosan nanocomposite has spherical shape with the average size of 20–25 nm. BET surface area and the average pore size of ZnO/chitosan nanocomposite are 2.2436 (m2/g) and 12.2 nm, respectively. The material was applied as an adsorbent for congo red removal from aqueous solutions. The congo red adsorption is better described by the Langmuir model (R2=0.996) than by the Freundlich model (R2=0.962). Therefore, it can be presumed that congo red was adsorbed in a single monolayer with the theoretical maximum adsorption capacity of 227.3 (mg/g). This is comparable to other available adsorbents. It can be suggested that ZnO/chitosan nanocomposite could serve as promising adsorbent for congo red in wastewater treatment technology.

Engineering Functionalized Chitosan-Based Sorbent Material: Characterization and Sorption of Toxic Elements

The present study reports the engineering of functionalized chitosan (CH)-based biosorbent material. Herein, a two-step reaction was performed to chemically modify the CH using 1,4-bis(3-aminopropyl) piperazine to incorporate nitrogen basic centers for cations sorption from the aqueous environment. The resultant functionalized chitosan-based sorbent material was designated as CH-ANP and characterized using various analytical techniques, including elemental analysis, Fourier-transform infrared spectroscopy (FTIR), 13C NMR (in solid-state), X-ray diffraction, and thermal analysis. Then, the newly engineered CH-ANP was employed for the removal of copper, lead, and cadmium in the aqueous medium. Langmuir sorption isotherm analysis revealed that the highest sorption abilities achieved were 2.82, 1.96, and 1.60 mmol g−1 for copper, cadmium, and lead, respectively. Linear and nonlinear regression methods were deployed on the sorption data to study the behavior of the Langmuir, the Freundlich, and the Temkin sorption isotherms. Among the four different forms, the Langmuir isotherm type 1 fit well to the experimental data as compared to the other models. It also showed the lowest values of error, and a higher correlation coefficient than the Freundlich and Temkin models; thus it was the best fit with the experimental data compared to the latter two models. In conclusion, the findings suggest that chemically modified novel materials with enhanced Lewis basic centers are useful and promising candidates for the sorption of various toxic cations in aqueous solution.

Adsorptive removal of anionic dye (Reactive Black 5) from aqueous solution using chemically modified banana peel powder: kinetic, isotherm, thermodynamic, and reusability studies

The removal of Reactive Black 5 (RB5) using chemically modified banana peel powder (CMBPP) from aqueous solution was dealt with in the present investigation. Factors affecting the adsorption of RB5 (like pH solution, agitation speed, initial concentration of RB5, contact time and temperature) were investigated. FTIR, SEM-EDX, BET and Elemental analysis characterized the adsorbent material. Adsorption kinetic results evaluated by non-linear pseudo-second-order model was fitted well and showed good correlation with the experimental data than the pseudo-first-order model. The experimental equilibrium data evaluated by non-linear Langmuir, Freundlich, Dubinin-Radushkevich (D-R), and Temkin equations and the experimental data were well described by the Langmuir isotherm model. Langmuir monolayer sorption capacity of RB5 onto CMBPP was observed at pH 3.0 (211.8 mg/g). The values of thermodynamic parameters revealed that the sorption process was feasible, spontaneous, endothermic, and physisorption in nature, i.e. (ΔG° <0, ΔH° > 0, and ΔS° > 0). Desorption studies reveal that the maximum recovery of RB5 when 0.1 M NaOH solution used as a desorbent. The CMBPP also exhibited excellent regeneration efficiency for the five cycles of successive adsorption-desorption. The results exposed that CMBPP could use as a prospective adsorbent material for the removal of RB5 from aqueous media.

Topology, magnetism and dye adsorption properties of metal organic frameworks (MOFs) synthesized from bench chemicals

Two new MOFs (CuMOF-1 and CoMOF-2) are synthesized, characterized by spectral and magnetic studies and employed for selective dye adsorption properties.