Application and comparison in biosynthesis and biodegradation by Fusarium solani and Aspergillus fumigatus cutinases

Enzyme Benchmarking with Polyethylene Furanoate Soluble Scaffolds for Directed Evolution of PEFases

Plastic waste is a major threat in our industrialized world and is driving research into bioplastics. The success of biobased polyethylene furanoate (PEF) as a viable alternative to polyethylene terephthalate (PET) of fossil origin will depend on designing effective enzymes to break it down, aiding its recycling. Here, a panel of fungal and bacterial cutinases were functionally expressed in a tandem yeast expression system based on Saccharomyces cerevisiae and Pichia pastoris. The activity of the enzyme panel was tested with soluble PEF model scaffolds, observing a correlation with the degradation of real PEF powder. A high-throughput colorimetric screening assay based on the PEF scaffold diethyl furan-2,5-dicarboxylate was developed, establishing the basis for future directed evolution campaigns of PEFases.

Structure and stability of an apo thermophilic esterase that hydrolyzes polyhydroxybutyrate

Pollution from plastics is a global problem that threatens the biosphere for a host of reasons, including the time scale that it takes for most plastics to degrade. Biodegradation is an ideal solution for remediating bioplastic waste as it does not require the high temperatures necessary for thermal degradation and does not introduce additional pollutants into the environment. Numerous organisms can scavenge for bioplastics, such as polylactic acid (PLA) or poly-(R)-hydroxybutyrate (PHB), which they can use as an energy source. Recently, a promiscuous PHBase from the thermophilic soil bacterium Lihuaxuella thermophila (LtPHBase) was identified. LtPHBase can accommodate many substrates, including PHB granules and films and PHB block copolymers, as well as the unrelated polymers polylactic acid (PLA) and polycaprolactone (PCL). LtPHBase uses the expected Ser-His-Asp catalytic triad for hydrolysis at an optimal enzyme activity near 70°C. Here, the 1.75 Å resolution crystal structure of apo LtPHBase is presented and its chemical stability is profiled. Knowledge of its substrate preferences was extended to different-sized PHB granules. It is shown that LtPHBase is highly resistant to unfolding, with barriers typical for thermophilic enzymes, and shows a preference for low-molecular-mass PHB granules. These insights have implications for the long-term potential of LtPHBase as an industrial PHB hydrolase and shed light on the evolutionary role that this enzyme plays in bacterial metabolism.

Review of nomenclature and methods of analysis of polyethylene terephthalic acid hydrolyzing enzymes activity

Enzymatic degradation of polyethylene terephthalic acid (PET) has been gaining increasing importance. This has resulted in a significant increase in the search for newer enzymes and the development of more efficient enzyme-based systems. Due to the lack of a standard screening process, screening new enzymes has relied on other assays to determine the presence of esterase activity. This, in turn, has led to various nomenclatures and methods used to describe them and measure their activity. Since all PET-hydrolyzing enzymes are α/β hydrolases, they catalyze a serine nucleophilic attack and cleave an ester bond. They are lipases, esterases, cutinases and hydrolases. This has been used interchangeably, leading to difficulties while comparing results and evaluating progress. This review discusses the varied enzyme nomenclature being adapted, the different assays and analysis methods reported, and the strategies used to increase PET-hydrolyzing enzyme efficiency. A section on the various ways to quantify PET hydrolysis is also covered.

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Functional characterization and structural insights of three cutinases from the ascomycete Fusarium verticillioides

Cutinases are serine esterases that belong to the α/β hydrolases superfamily. The natural substrates for these enzymes are cutin and suberin, components of the plant cuticle, the first barrier in the defense system against pathogen invasion. It is well-reported that plant pathogens produce cutinases to facilitate infection. Fusarium verticillioides, one important corn pathogens, is an ascomycete upon which its cutinases are poorly explored. Consequently, the objective of this study was to perform the biochemical characterization of three precursor cutinases (FvCut1, FvCut2, and FvCut3) from F. verticillioides and to obtain structural insights about them. The cutinases were produced in Escherichia coli and purified. FvCut1, FvCut2, and FvCut3 presented optimal temperatures of 20, 40, and 35 °C, and optimal pH of 9, 7, and 8, respectively. Some chemicals stimulated the enzymatic activity. The kinetic parameters revealed that FvCut1 has higher catalytic efficiency (Kcat/Km) in the p-nitrophenyl-butyrate (p-NPB) substrate. Nevertheless, the enzymes were not able to hydrolyze polyethylene terephthalate (PET). Furthermore, the three-dimensional models of these enzymes showed structural differences among them, mainly FvCut1, which presented a narrower opening cleft to access the catalytic site. Therefore, our study contributes to exploring the diversity of fungal cutinases and their potential biotechnological applications.

A review on cutinases enzyme in degradation of microplastics

From the surface of the earth to the depths of the ocean, microplastics are a hazard for both aquatic and terrestrial habitats. Due to their small size and vast expanse, they can further integrate into living things. The fate of microplastics in the environment depends upon the biotic components such as microorganisms which have potential enzymes to degrade the microplastics. As a result, scientists are interested in using microorganisms like bacteria, fungi, and others to remediate microplastic. These microorganisms release the cutinase enzyme, which is associated with the enzymatic breakdown of microplastics and plastic films. Yet, numerous varieties of microplastics exist in the environment and their contaminants act as a significant challenge in degrading microplastics. The review discusses the cutinases enzyme degradation strategies and potential answers to deal with existing and newly generated microplastic waste - polyethylene (PE), polyethylene terephthalate (PET), poly-ε-caprolactone (PCL), polyurethanes (PU), and polybutylene succinate (PBS), along with their degradation pathways. The potential of cutinase enzymes from various microorganisms can effectively act to remediate the global problem of microplastic pollution.

Microorganisms that produce enzymes active on biodegradable polyesters are ubiquitous

Biodegradability standards measure ultimate biodegradation of polymers by exposing the material under test to a natural microbial inoculum. Available tests developed by the International Organization for Standardization (ISO) use inoculums sampled from different environments e.g. soil, marine sediments, seawater. Understanding whether each inoculum is to be considered as microbially unique or not can be relevant for the interpretation of tests results. In this review, we address this question by consideration of the following: (i) the chemical nature of biodegradable plastics (virtually all biodegradable plastics are polyesters) (ii) the diffusion of ester bonds in nature both in simple molecules and in polymers (ubiquitous); (iii) the diffusion of decomposers capable of producing enzymes, called esterases, which accelerate the hydrolysis of esters, including polyesters (ubiquitous); (iv) the evidence showing that synthetic polyesters can be depolymerized by esterases (large and growing); (v) the evidence showing that these esterases are ubiquitous (growing and confirmed by bioinformatics studies). By combining the relevant available facts it can be concluded that if a certain polyester shows ultimate biodegradation when exposed to a natural inoculum, it can be considered biodegradable and need not be retested using other inoculums. Obviously, if the polymer does not show ultimate biodegradation it must be considered recalcitrant, until proven otherwise.

Recent advances in the biodegradation of polyethylene terephthalate with cutinase-like enzymes

Polyethylene terephthalate (PET) is a synthetic polymer in the polyester family. It is widely found in objects used daily, including packaging materials (such as bottles and containers), textiles (such as fibers), and even in the automotive and electronics industries. PET is known for its excellent mechanical properties, chemical resistance, and transparency. However, these features (e.g., high hydrophobicity and high molecular weight) also make PET highly resistant to degradation by wild-type microorganisms or physicochemical methods in nature, contributing to the accumulation of plastic waste in the environment. Therefore, accelerated PET recycling is becoming increasingly urgent to address the global environmental problem caused by plastic wastes and prevent plastic pollution. In addition to traditional physical cycling (e.g., pyrolysis, gasification) and chemical cycling (e.g., chemical depolymerization), biodegradation can be used, which involves breaking down organic materials into simpler compounds by microorganisms or PET-degrading enzymes. Lipases and cutinases are the two classes of enzymes that have been studied extensively for this purpose. Biodegradation of PET is an attractive approach for managing PET waste, as it can help reduce environmental pollution and promote a circular economy. During the past few years, great advances have been accomplished in PET biodegradation. In this review, current knowledge on cutinase-like PET hydrolases (such as TfCut2, Cut190, HiC, and LCC) was described in detail, including the structures, ligand-protein interactions, and rational protein engineering for improved PET-degrading performance. In particular, applications of the engineered catalysts were highlighted, such as improving the PET hydrolytic activity by constructing fusion proteins. The review is expected to provide novel insights for the biodegradation of complex polymers.

Biochemical characteristics and potential application of a thermostable starch branching enzyme from Bacillus licheniformis

Slowly digestible starch (SDS) has attracted increasing attention for its function of preventing metabolic diseases. Based on transglycosylation, starch branching enzymes (1,4-α-glucan branching enzymes, GBEs, EC 2.4.1.18) can be used to regulate the digestibility of starch. In this study, a GBE gene from Bacillus licheniformis (bl-GBE) was cloned, expressed, purified, and characterized. Sequence analysis and structural modeling showed that bl-GBE belong to the glycoside hydrolase 13 (GH13) family, with which its active site residues were conserved. The bl-GBE was highly active at 80 °C and a pH range of 7.5-9.0, and retained 90% of enzyme activity at 70 °C for 16 h. bl-GBE also showed high substrate specificity (80.88 U/mg) on potato starch. The stability and the changes of the secondary structure of bl-GBE at different temperature were determined by circular dichroism (CD) spectroscopy. The CD data showed a loss of 20% of the enzyme activity at high temperatures (80 °C), due to the decreased content of the α -helix in the secondary structure. Furthermore, potato starch treated with bl-GBE (300 U/g starch) showed remarkable increase in stability, solubility, and significant reduction viscosity. Meanwhile, the slowly digestible starch content of bl-GBE modified potato starch increased by 53.03% compared with native potato starch. Our results demonstrated the potential applications of thermophilic bl-GBE in food industries.

An Overview into Polyethylene Terephthalate (PET) Hydrolases and Efforts in Tailoring Enzymes for Improved Plastic Degradation

Plastic or microplastic pollution is a global threat affecting ecosystems, with the current generation reaching as much as 400 metric tons per/year. Soil ecosystems comprising agricultural lands act as microplastics sinks, though the impact could be unexpectedly more far-reaching. This is troubling as most plastic forms, such as polyethylene terephthalate (PET), formed from polymerized terephthalic acid (TPA) and ethylene glycol (EG) monomers, are non-biodegradable environmental pollutants. The current approach to use mechanical, thermal, and chemical-based treatments to reduce PET waste remains cost-prohibitive and could potentially produce toxic secondary pollutants. Thus, better remediation methods must be developed to deal with plastic pollutants in marine and terrestrial environments. Enzymatic treatments could be a plausible avenue to overcome plastic pollutants, given the near-ambient conditions under which enzymes function without the need for chemicals. The discovery of several PET hydrolases, along with further modification of the enzymes, has considerably aided efforts to improve their ability to degrade the ester bond of PET. Hence, this review emphasizes PET-degrading microbial hydrolases and their contribution to alleviating environmental microplastics. Information on the molecular and degradation mechanisms of PET is also highlighted in this review, which might be useful in the future rational engineering of PET-hydrolyzing enzymes.

Metabolic engineering of Yarrowia lipolytica for poly(ethylene terephthalate) degradation

Polyethylene terephthalate (PET) is the most widely used plastic, whose global production scale causes serious problems due to it being highly non-biodegradable. The present work provides a novel approach to plastic degradation studies, which involves direct degradation of PET in the culture of a modified Y. lipolytica yeast strain extracellularly producing cutinase from Fusarium solani. In this study, we successfully accomplished a scale-up of the degradation process in culture, which is promising from the perspective of wider application of the developed method in the future. Additionally, we tested the effect of various supplements, which may increase the PET degradation efficiency in the culture of the Y. lipolytica pAD CUT_FS strain. The ability of PET decomposition was verified by the amount of the released degradation products, such as terephthalic acid (TPA) and mono-(2-hydroxyethyl)-terephthalic acid (MHET), during cultivation. We observed that the quantities of TPA and MHET released during the PET degradation process were increasing daily, and were 1.51 gL^-1 and 0.45 gL^-1, respectively after 240 h of the bioreactor fermentation. Analysis of the PET film by electron microscopy indicated that there was abundant damage on the surface of the material. This study also demonstrated that the engineered Y. lipolytica strain is able to degrade PET at 28 °C during fermentation. The results obtained in this study using amorphous PET powder provide a wide range of possibilities for application of the cutinase-secreting strain of Y. lipolytica on the more difficult to degrade highly crystalline PET films, PET bottles and PET melts.

Fungal Enzymes Involved in Plastics Biodegradation

Plastic pollution is a growing environmental problem, in part due to the extremely stable and durable nature of this polymer. As recycling does not provide a complete solution, research has been focusing on alternative ways of degrading plastic. Fungi provide a wide array of enzymes specialized in the degradation of recalcitrant substances and are very promising candidates in the field of plastic degradation. This review examines the present literature for different fungal enzymes involved in plastic degradation, describing their characteristics, efficacy and biotechnological applications. Fungal laccases and peroxidases, generally used by fungi to degrade lignin, show good results in degrading polyethylene (PE) and polyvinyl chloride (PVC), while esterases such as cutinases and lipases were successfully used to degrade polyethylene terephthalate (PET) and polyurethane (PUR). Good results were also obtained on PUR by fungal proteases and ureases. All these enzymes were isolated from many different fungi, from both Basidiomycetes and Ascomycetes, and have shown remarkable efficiency in plastic biodegradation under laboratory conditions. Therefore, future research should focus on the interactions between the genes, proteins, metabolites and environmental conditions involved in the processes. Further steps such as the improvement in catalytic efficiency and genetic engineering could lead these enzymes to become biotechnological applications in the field of plastic degradation.

Enzymatic Degradation of the Most Common Aliphatic Bio-Polyesters and Evaluation of the Mechanisms Involved: An Extended Study

Commercial hydrolytic enzymes belonging to different subclasses (several lipases, proteinase k, cutinase) were investigated for their ability to degrade different aliphatic polyesters, i.e., poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBSA), two poly(caprolactone), having two different molecular weights, poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC). The enzyme screening was first carried out by investigating the capacity of fully degrading the target polymers in 24 h, then weight loss measurements of selected polyesters and target enzymes were performed. Solid residues after enzyme degradation were characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetry (TGA). Liquid fractions were studied via GPC, ¹H NMR and high-performance liquid chromatography (HPLC). PCL and PBSA were found to be the most biodegradable polyesters, under the conditions used in this study. PBS was fully degraded only by cutinase, whereas none of the tested enzymes were able to completely degrade PLA and PPC, in the conditions assessed here. Cutinase exhibited the highest hydrolytic activity on PBSA, while lipase from Candida sp. (CALB) on low molecular weight PCL. Chemical analyses on residual solids showed that the enzymatic degradation occurred homogeneously from the surface through an erosion mechanism and did not significantly affect the macromolecular structure and thermal stability. Cleaving action mode for each enzyme (endo- and/or exo-type) on the different polyesters were also proposed based on the evaluation of the degradation products in the liquid fraction.

Expression of a Cutinase of Moniliophthora roreri with Polyester and PET-Plastic Residues Degradation Activity

Cutinases are enzymes produced by phytopathogenic fungi like Moniliophthora roreri. The three genome-located cutinase genes of M. roreri were amplified from cDNA of fungi growing in different induction culture media for cutinase production. The mrcut1 gene was expressed in the presence of a cacao cuticle, while the mrcut2 and mrcut3 genes were expressed when an apple cuticle was used as the inducer. The sequences of all genes were obtained and analyzed by bioinformatics tools to determine the presence of signal peptides, introns, glycosylation, and regulatory sequences. Also, the theoretical molecular weight and pI were obtained and experimentally confirmed. Finally, cutinase 1 from M. roreri (MRCUT1) was selected for heterologous expression in Escherichia coli. Successful overexpression of MRCUT1 was observed with the highest enzyme activity of 34,036 U/mg under the assay conditions at 40°C and pH 8. Furthermore, the degradation of different synthetic polyesters was evaluated; after 21 days, 59% of polyethylene succinate (PES), 43% of polycaprolactone (PCL), and 31% of polyethylene terephthalate (PET) from plastic residues were degraded. IMPORTANCE Plastic pollution is exponentially increasing; even the G20 has recognized an urgent need to implement actions to reduce it. In recent years, searching for enzymes that can degrade plastics, especially those based on polyesters such as PET, has been increasing as they can be a green alternative to the actual plastic degradation process. A promising option in recent years refers to biological tools such as enzymes involved in stages of partial and even total degradation of some plastics. In this context, the MRCUT1 enzyme can degrade polyesters contained in plastic residues in a short time. Besides, there is limited knowledge about the biochemical properties of cutinases from M. roreri. Commonly, fungal enzymes are expressed as inclusion bodies in E. coli with reduced activity. Interestingly, the successful expression of one cutinase of M. roreri in E. coli with enhanced activity is described.

Phylogenetic analysis and in-depth characterization of functionally and structurally diverse CE5 cutinases

Cutinases are esterases that release fatty acids from the apoplastic layer in plants. As they accept bulky and hydrophobic substrates, cutinases could be used in many applications, ranging from valorization of bark-rich side streams to plastic recycling. Advancement of these applications, however, requires deeper knowledge of cutinases' biodiversity and structure-function relationships. Here, we mined over 3000 members from carbohydrate esterase family 5 for putative cutinases and condensed it to 151 genes from known or putative lignocellulose-targeting organisms. The 151 genes were subjected to a phylogenetic analysis, which showed that cutinases with available crystal structures were phylogenetically closely related. We then selected nine phylogenic diverse cutinases for recombinant production and characterized their kinetic activity against para-nitrophenol substrates esterified with consecutively longer alkyl chains (pNP-C2 to C16). Each investigated cutinase had a unique activity fingerprint against the tested pNP substrates. The five enzymes with the highest activity on pNP-C12 and C16, indicative of activity on bulky hydrophobic compounds, were selected for in-depth kinetic and structure-function analysis. All five enzymes showed a decrease in kcat values with increasing substrate chain length, whereas KM values and binding energies (calculated from in silico docking analysis) improved. Two cutinases from Fusarium solani and Cryptococcus sp. exhibited outstandingly low KM values, resulting in high catalytic efficiencies toward pNP-C16. Docking analysis suggested that different clades of the phylogenetic tree may harbor enzymes with different modes of substrate interaction, involving a solvent-exposed catalytic triad, a lipase-like lid, or a clamshell-like active site possibly formed by flexible loops.

Immobilization of Fusarium solani Cutinase onto Magnetic Genipin-Crosslinked Chitosan Beads

Genipin was used as a crosslinking agent to prepare magnetic genipin-crosslinked chitosan beads, which were then used as a carrier for immobilizing recombinant cutinase from Fusarium solani (FSC) to obtain immobilized FSC. The optimal temperature for the immobilized FSC was 55 °C, which was 5 °C higher than that of the free enzyme, whereas its optimal pH was increased from 8.0 to 9.0; this indicates that the immobilized FSC had improved pH and thermal stability. After repeated use for 10 cycles, the activity of the immobilized FSC remained at more than 50%; after being stored at 4 °C for 30 days, its activity was still approximately 88%. We also found that the Km of the immobilized FSC was higher than that of the free enzyme. These results indicate that the performance of FSC was improved after immobilization, which is an important basis for the subsequent application of FSC in industrial production.

Progressing Plastics Circularity: A Review of Mechano-Biocatalytic Approaches for Waste Plastic (Re)valorization

Inspirational concepts, and the transfer of analogs from natural biology to science and engineering, has produced many excellent technologies to date, spanning vaccines to modern architectural feats. This review highlights that answers to the pressing global petroleum-based plastic waste challenges, can be found within the mechanics and mechanisms natural ecosystems. Here, a suite of technological and engineering approaches, which can be implemented to operate in tandem with nature's prescription for regenerative material circularity, is presented as a route to plastics sustainability. A number of mechanical/green chemical (pre)treatment methodologies, which simulate natural weathering and arthropodal dismantling activities are reviewed, including: mechanical milling, reactive extrusion, ultrasonic-, UV- and degradation using supercritical CO2. Akin to natural mechanical degradation, the purpose of the pretreatments is to render the plastic materials more amenable to microbial and biocatalytic activities, to yield effective depolymerization and (re)valorization. While biotechnological based degradation and depolymerization of both recalcitrant and bioplastics are at a relatively early stage of development, the potential for acceleration and expedition of valuable output monomers and oligomers yields is considerable. To date a limited number of independent mechano-green chemical approaches and a considerable and growing number of standalone enzymatic and microbial degradation studies have been reported. A convergent strategy, one which forges mechano-green chemical treatments together with the enzymatic and microbial actions, is largely lacking at this time. An overview of the reported microbial and enzymatic degradations of petroleum-based synthetic polymer plastics, specifically: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polystyrene (PS), polyethylene terephthalate (PET), polyurethanes (PU) and polycaprolactone (PCL) and selected prevalent bio-based or bio-polymers [polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and polybutylene succinate (PBS)], is detailed. The harvesting of depolymerization products to produce new materials and higher-value products is also a key endeavor in effectively completing the circle for plastics. Our challenge is now to effectively combine and conjugate the requisite cross disciplinary approaches and progress the essential science and engineering technologies to categorically complete the life-cycle for plastics.

Characteristics of a recombinant Fusarium verticillioides cutinase and its effects on enzymatic hydrolysis of rice straw

The current study heterologously expressed a cutinase from Fusarium verticillioides by Pichia pastoris and investigated its properties and effects on the hydrolysis of rice straw. The optimal pH and temperature for F. verticillioides cutinase were 8.0 and 50 °C, respectively. F. verticillioides cutinase had poor thermal stability and could be inhibited by some metal ions, inhibitors, and detergents (5 mM), including Ni²⁺, Zn²⁺, Cu²⁺, Ca²⁺, Mn²⁺, sodium dodecyl sulfate, EDTA, and Tween-20. F. verticillioides cutinase could tolerate 15% methanol and dimethyl sulfoxide but was significantly repressed by 15% ethanol and acetone with 48% and 63% residual activity, respectively. F. verticillioides cutinase could degrade the cuticle of rice straw with palmitic acid and stearic acid as the main products. However, the dissolving sugars released from the rice straw treated with F. verticillioides cutinase were significantly reduced by 29.2 μg/mL compared with the control (107.9 μg/mL). Similarly, the reducing sugars produced from the cellulase hydrolysis of rice straw pretreated with F. verticillioides cutinase were reduced by 63.5 μg/mL relative to the control (253.6 μg/mL). Scanning electron microscopy results showed that numerous tuberculate or warty protrusions were present nearly everywhere on the surface of rice straw treated with F. verticillioides cutinase, and some protrusions even covered and blocked the stomata of the rice straw surface. Current limited data indicate that F. verticillioides cutinase might not be an appropriate choice for improving the utilization of agricultural straws.

Enzymatic Remediation of Polyethylene Terephthalate (PET)-Based Polymers for Effective Management of Plastic Wastes: An Overview

Globally, plastic-based pollution is now recognized as one of the serious threats to the environment. Among different plastics, polyethylene terephthalate (PET) occupies a pivotal place, its excess presence as a waste is a major environmental concern. Mechanical, thermal, and chemical-based treatments are generally used to manage PET pollution. However, these methods are usually expensive or generate secondary pollutants. Hence, there is a need for a cost-effective and environment-friendly method for efficient management of PET-based plastic wastes. Considering this, enzymatic treatment or recycling is one of the important methods to curb PET pollution. In this regard, PET hydrolases have been explored for the treatment of PET wastes. These enzymes act on PET and end its breakdown into monomeric units and subsequently results in loss of weight. However, various factors, specifically PET crystallinity, temperature, and pH, are known to affect this enzymatic process. For effective hydrolysis of PET, high temperature is required, which facilitates easy accessibility of substrate (PET) to enzymes. However, to function at this high temperature, there is a requirement of thermostable enzymes. The thermostability could be enhanced using glycosylation, immobilization, and enzyme engineering. Furthermore, the use of surfactants, additives such as Ca²⁺, Mg²⁺, and hydrophobins (cysteine-rich proteins), has also been reported to enhance the enzymatic PET hydrolysis through facilitating easy accessibility of PET polymers. The present review encompasses a brief overview of the use of enzymes toward the management of PET wastes. Various methods affecting the treatment process and different constraints arising thereof are also systematically highlighted in the review.

Stabilization of cutinase by covalent attachment on magnetic nanoparticles and improvement of its catalytic activity by ultrasonication

This paper reports on stabilization of serine cutinase activity by immobilizing it through cross linking with glutaraldehyde on magnetic nanoparticles (Fe-NPs) and intensification of catalytic activity by ultrasonic treatment. The optimum parameters were cross linking with 10.52 mM glutaraldehyde for 90 min using 1:2 (w/w) ratio of enzyme:Fe-NPs. The characterization of cutinase-Fe-NPs was done by different instrumental analysis. Ultrasonic power showed a beneficial effect on the activity of free and immobilized cutinase at 5.76 and 7.63 W, respectively, after 12 min. Immobilization and ultrasonic treatment led to increments in kinetic parameters (K_m and V_max) along with noticeable changes in the secondary structural fractions of cutinase. Cutinase-Fe-NPs showed augmented pH (4-8) and thermal stability (40-60 °C). Considerably higher thermal inactivation kinetic constants (k_d, t_1/2 and D-value) and thermodynamic constants (E_d, ΔH°, ΔG° and ΔS°) highlighted superior thermostability of cutinase-Fe-NPs. Cutinase-Fe-NPs and ultrasound treated cutinase-Fe-NPs retained 61.88% and 38.76% activity during 21-day storage, and 82.82 and 80.69% activity after fifth reusability cycle, respectively.

Biocatalytic Degradation of Parabens Mediated by Cell Surface Displayed Cutinase

Parabens are emerging environmental contaminants with known endocrine-disrupting effects. This study created a novel biocatalyst (named as SDFsC) by expressing the enzyme Fusarium solani pisi cutinase (FsC) on the cell surface of Baker's yeast Sacchromycese cerevisiae and demonstrated successful enzyme-mediated removal of parabens for the first time. Parabens with different side chain structures had different degradation rates by the SDFsC. The SDFsC preferentially degraded the parabens with relatively long alkyl or aromatic side chains. The structure-dependent degradability was in a good agreement with the binding energy between the active site of FsC and different parabens. In real wastewater effluent solution, the SDFsC effectively degraded 800 μg/L of propylparaben, butylparaben, and benzylparaben, either as a single compound or as a mixture, within 48 h. The estrogenic activity of parabens was considerably reduced as the parent parabens were degraded into 4-hydroxybenzoic acid via hydrolysis pathway by the SDFsC. The SDFsC showed superior reusability and maintained 93% of its initial catalytic activity after six rounds of paraben degradation reaction. Results from this study provide scientific basis for developing biocatalysis as a green chemistry alternative for advanced treatment of parabens in sustainable water reclamation.

A Middle-Aged Enzyme Still in Its Prime: Recent Advances in the Field of Cutinases

Cutinases are α/β hydrolases, and their role in nature is the degradation of cutin. Such enzymes are usually produced by phytopathogenic microorganisms in order to penetrate their hosts. The first focused studies on cutinases started around 50 years ago. Since then, numerous cutinases have been isolated and characterized, aiming at the elucidation of their structure–function relations. Our deeper understanding of cutinases determines the applications by which they could be utilized; from food processing and detergents, to ester synthesis and polymerizations. However, cutinases are mainly efficient in the degradation of polyesters, a natural function. Therefore, these enzymes have been successfully applied for the biodegradation of plastics, as well as for the delicate superficial hydrolysis of polymeric materials prior to their functionalization. Even though research on this family of enzymes essentially began five decades ago, they are still involved in many reports; novel enzymes are being discovered, and new fields of applications arise, leading to numerous related publications per year. Perhaps the future of cutinases lies in their evolved descendants, such as polyesterases, and particularly PETases. The present article reviews the biochemical and structural characteristics of cutinases and cutinase-like hydrolases, and their applications in the field of bioremediation and biocatalysis.

Enhancement of quality retention of Grifola frondosa fruiting bodies by erythorbic acid treatment

In this paper, the effects of erythorbic acid (EA) treatment with different concentrations on the quality of Grifola frondosa fruiting bodies stored at 4 °C for 27 days were studied by determining the changes in moisture content, weight loss, browning, electrolyte leakage, malondialdehyde (MDA), and nutritional compounds. The activities of polyphenoloxidase (PPO), cellulase and other antioxidant enzymes including superoxide dismutase (SOD), catalase, and peroxidase (POD) were also measured. Results showed that 0.1% EA-treated G. frondosa fruiting body maintained lower weight loss (< 6.0%, w/w), electrolyte leakage (< 45.8%), MDA (< 4.17 µmol kg-1), and higher moisture content (> 90.7%, w/w). Lower activities of PPO (< 72.64 × 103 U kg-1) and cellulase (< 189.86 × 103 U kg-1) in 0.1% EA-treated samples were observed compared with the other treatments. As a stereoisomer of ascorbic acid (AA), EA also could enhance SOD and POD activities of G. frondosa fruiting bodies. Our findings were the first time to evaluate the effect of EA on maintaining quality in G. frondosa fruiting bodies, and proved that low concentrations of EA (especially 0.1% EA, w/v) treatments were beneficial to preserve G. frondosa fruiting body with even higher efficiency than AA treatment. This study paved a foundation for the enhancement of quality retention of G. frondosa fruiting bodies.

Significant improvement of the nitrilase activity by semi-rational protein engineering and its application in the production of iminodiacetic acid

Iminodiacetic acid (IDA) is widely used as an intermediate in the manufacturing of chelating agents, glyphosate herbicides and surfactants. To improve activity and tolerance to the substrate for IDA production, Acidovorax facilis nitrilase was selected for further modification by the gene site saturation mutagenesis method. After screened by a two-step screening method, the best mutant (Mut-F168V/T201N/S192F/M191T/F192S) was selected. Compared to the wild-type nitrilase, Mut-F168V/T201N/S192F/M191T/F192S showed 136% improvement in specific activity. Co²⁺ stimulated nitrilase activity, whereas Cu²⁺, Zn²⁺ and Tween 80 showed a strong inhibitory effect. The V_max and k_cat of Mut-F168V/T201N/S192F/M191T/F192S were enhanced 1.23 and 1.23-fold, while the K_m was decreased 1.53-fold. The yield of Mut-F168V/T201N/S192F/M191T/F192S with 453.2 mM of IDA reached 71.9% in 5 h when 630 mM iminodiacetonitrile was used as substrate. This study indicated that mutant nitrilase obtained in this study is promising in applications for the upscale production of IDAN.

Enzymatic degradation of poly(butylene succinate) with different molecular weights by cutinase

Poly(butylene succinate) (PBS) films with different molecular weights were enzymatically degraded by cutinase. Changes in the properties of the films before and after enzymatic degradation were studied through scanning electron microscopy, differential scanning calorimetry, thermogravimetry, X-ray powder diffraction, proton nuclear magnetic resonance, and gel-permeation chromatography analysis. The weight loss of the films initially decreased and then increased with increasing molecular weight. Crystallinity was inversely proportional to weight loss and tended to decrease with prolonged degradation time. Crystalline and amorphous regions were simultaneously degraded. The thermal stability of PBS films decreased after enzymatic degradation. PBS was the main component of the enzymatically degraded polymers. The molecular weights of the films did not considerably change before and after degradation by cutinase.

Improvement of extracellular lipase production by a newly isolated Yarrowia lipolytica mutant and its application in the biosynthesis of L-ascorbyl palmitate

Yarrowia lipolytica Wt-11 producing an extracellular lipase was isolated and identified. To improve the lipase production, Y. lipolytica Wt-11 was subjected to low-energy ion implantation mutation breeding, and a best mutant, Y. lipolytica Mut-96, was obtained after screening. Under the optimal cultivation conditions, the scaled-up production of lipases were performed, and the lipase activity of Y. lipolytica Mut-96 was enhanced nearly 5.5-fold compared with that of Y. lipolytica Wt-11. After fermentation, the lipases were purified, and the characteristics of the purified lipases were studied. The optimum temperatures and pHs for lipases from Wt-11and Mut-96 were 30°C and 8.0, respectively. The purified lipases were stable between pH 7.0 and 8.5 and unstable at temperatures above 40°C. The lipase activities were enhanced by Ca²⁺, Ba²⁺, Mn²⁺, Fe²⁺ and SDS. The synthesis of L-ascorbyl palmitate via esterification with L-ascorbic acid and palmitic acid by immobilized lipases from Wt-11 and Mut-96 in organic media was investigated, and the L-ascorbyl palmitate can be respectively produced at levels of 14.8 and 27.5g/L.