Development of bioactive cellulose nanocrystals derived from dominant cellulose polymorphs I and II from Capsosiphon Fulvescens for biomedical applications

Rational Design of Amorphous Carbon-Coated Laminar-Structured Wood for Integrating Repeatable Early Fire Detection and High-Temperature Affordable Flexible Pressure Sensing in One System

High-temperature affordable flexible polymer-based pressure sensors integrated with repeatable early fire warning service are strongly desired for harsh environmental applications, yet their creation remains challenging. This work proposed an approach for preparing such advanced integrated sensors based on silver nanoparticles and an ammonium polyphosphate (APP)-modified laminar-structured bulk wood sponge (APP/Ag@WS). Such integrated sensors demonstrated excellent fire warning performance, including a short response time (minimum of 0.44 s), a long-lasting alarm time (>750 s), and reliable repeatability. Moreover, it achieved high-temperature affordable flexible pressure sensing that exhibited an almost unimpaired working range of 0-7.5 kPa and a higher sensitivity (in the low-pressure range, maximum to 226.03 kPa-1) after fire. The high stability was attributed to reliable structural elasticity, and the wood-derived amorphous carbon is capable of repeatable fire warnings. Finally, a Ag@APP/WS-based wireless fire alarm system that realized reliable house fire accident detection was demonstrated, showing great promise for smart firefighting application.

Cinnamaldehyde-enriched Pickering emulsions stabilized by modified cellulose I and II nanocrystals recycled from maple leaves for shrimp preservation

The utilization of biomass waste has attracted much interest, but such attention hasn't been paid to the abundant fallen maple leaves in Canada. Herein, we aim to obtain cellulose nanocrystals (CNCs) from maple leaves and explore their potential applications as sustainable stabilizers of Pickering emulsions for the preservation of food products with complicated structures. The results reveal that two types of CNCs were extracted from maple leaves at different alkaline conditions. Octenyl succinic anhydride was selected to modify rod-like CNCs, and the CNC-stabilized oil-in-water Pickering emulsions showed excellent stability. Cinnamaldehyde, a model antibacterial compound, was incorporated in the Pickering emulsions, which exhibited the improved storage stability and sustained antibacterial capacity towards both Gram-positive and Gram-negative bacteria. Shrimp was chosen as an example that has complicated surface structure and is hard to disinfect, and the CNC-stabilized Pickering emulsions could be easily sprayed on the surface of shrimp to inhibit the proliferation of bacteria and inactivate the psychrophilic bacteria responsible for shrimp spoilage at refrigerated condition, so as to preserve the quality of shrimp. Therefore, the current work suggests the possibility to utilize fallen maple leaves as a promising source of CNCs and the applications of CNC-stabilized Pickering emulsions in seafood preservation.

Effects of hydrolysis conditions on the morphology of cellulose II nanocrystals (CNC-II) derived from mercerized microcrystalline cellulose

The properties of cellulose nanocrystals with allomorph II (CNC-II) vary with the sources and the treatments received. In this work, the influences of hydrolysis time, temperature, and the applied acid concentration on the crystal size of CNC-II were investigated by the surface response experimental design. The results showed that temperature was the most significant factor affecting the crystal size of CNC-II during hydrolysis from mercerized cellulose. Then the morphology and colloidal properties of CNC-II were revealed by dynamic laser scattering (DLS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), etc. XRD results indicated that CNC-II had slightly lower crystallinity (80.89 % vs 82.7 %) and larger crystallite size (5.21 vs. 5.13 nm) than CNC-I. TEM and AFM results showed that the morphology of CNC-II were disc-like and rod-like particles, with an average diameter of 14.6 ± 4.7 nm (TEM) and a thickness of 4- 8 nm (AFM). TG and XPS revealed the reduced thermal stability was due to the introduced sulfate groups in CNC-II during hydrolysis. This investigation has addressed the features of CNC-II derived from mercerized cellulose, and it would be promising in fabricating advanced materials.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Preparation of Cellulose Nanocrystals: Controlling the Crystalline Type by One-Pot Acid Hydrolysis

Cellulose nanocrystals (CNCs) have aroused increasing interest owing to their renewable origin and excellent properties derived from their size and morphology. Based on their chain orientation, CNCs can be prepared as two main allomorphs (I or II). However, achieving pure CNC allomorphs still requires enhanced control on the CNCs synthesis process and improved understanding of the involved reaction parameters. In this work, we study in detail a set of parameters for CNC synthesis using one-pot acid hydrolysis and evaluate their influence on the outcome with respect to yield, purity, and repeatability. We also demonstrate that a fast, nondestructive, and accurate methodology based on dynamic light scattering is an efficient alternative to the usual structural analysis of the synthesis outcome. Finally, we provide an improved protocol to reliably obtain each allomorph with mass yields of 25% for type I and 40% for type II. Emphasis is put on the reduction of the environmental impact and the overall preparation time.

Preparation and Evaluation of Undaria pinnatifida Nanocellulose in Fabricating Pickering Emulsions for Protection of Astaxanthin

Pickering emulsions stabilized from natural sources are often used to load unstable bio-active ingredients, such as astaxanthin (AXT), to improve their functionality. In this study, AXT-loaded Pickering emulsions were successfully prepared by 2,2,6,6-tetramethy-1-piperidine oxide (TEMPO)-oxidized cellulose nanofibers (TOCNFs) from Undaria pinnatifida. The morphology analysis showed that TOCNFs had a high aspect ratio and dispersibility, which could effectively prevent the aggregation of oil droplets. The stable emulsion was obtained after exploring the influence of different factors (ultrasonic intensity, TOCNFs concentration, pH, and ionic strength). As expected, AXT-loaded Pickering emulsions showed good stability at 50 °C and 14 days of storage. The results of simulated in vitro digestion showed that the emulsions exhibited higher release of free fatty acids (FFAs) and bioaccessibility of AXT than those in sunflower oil. Hence, our work brought new insights into the preparation of Pickering emulsions and their applications in protection and sustained, controlled release of AXT.

Effect of cellulose nanocrystals derived from Dunaliella tertiolecta marine green algae residue on crystallization behaviour of poly(lactic acid)

Marine green algae biomass residue (ABR), a waste by-product of Dunaliella tertiolecta, left behind after the extraction of oil from the algal biomass, was utilized for the fabrication of cellulose nanocrystals (CNCs). The fabricated sulphuric acid hydrolysed CNCs had needle-like morphology, with dominant cellulose type I polymorph and a high crystallinity index of 89 %. ICP-MS elemental analysis confirmed the presence of a variety of minerals in the ABR. Washed ABR (WABR)/PLA and CNC/PLA bio-composite films were developed via solvent casting technique with varying bio-filler loadings for comparing their effectiveness on the crystallization behaviour of PLA. FESEM, FTIR, XRD and TGA were used to characterize the bio-fillers. The nucleating and crystallization behaviour of the bio-composite films were confirmed using DSC, SAXS and POM analysis which indicated better effectiveness of CNCs with a significant reduction in cold crystallization temperature, and noteworthy increment in crystallinity and spherulite growth rate.

Biodegradable cellulose I (II) nanofibrils/poly(vinyl alcohol) composite films with high mechanical properties, improved thermal stability and excellent transparency

Cellulose nanofibrils (CNFs) with cellulose I and II allomorphs were efficiently prepared by sulfuric acid hydrolysis of eucalyptus cellulose under three different conditions followed by mechanical treatments: (i) classical sulfuric acid hydrolysis of cellulose I (CNF-I), (ii) sulfuric acid hydrolysis of mercerized cellulose II (MNF-II), and (iii) solubilization and hydrolysis of cellulose I by concentrated sulfuric acid and subsequent recrystallization in water (RNF-II). Crystal structure, surface chemistry, morphology and thermal properties of three CNFs were investigated and compared. Three CNFs of 2-10 wt% were mixed with PVA to prepare biodegradable composite films. CNF allomorph had significant impact on crystal structure, mechanical and thermal properties of the PVA composites. The maximum Young's modulus of CNF-I/PVA, RNF-II/PVA and MNF-II/PVA were increased by 62, 32 and 44%, respectively. Addition of CNFs raised onset degradation temperature (T_onset) and thermal decomposition temperature (T_max) of PVA nanocomposite, while decreased the melting temperature (T_m). Temperature window (T_onset - T_m) for the melt processing of nanocomposites (10 wt% CNF loading) were increased 2.8, 3.2 and 2.5 times for CNF-I/PVA, RNF-II/PVA and MNF-II/PVA, respectively. All composite films remained excellent transparency with addition of CNFs. This comparative study provided important knowledge of selecting CNF allomorph for fabrication of high-performance CNF/PVA composites.

Acid-free preparation and characterization of kelp (Laminaria japonica) nanocelluloses and their application in Pickering emulsions

Cellulose nanofibers (CNFs) from kelp were prepared by cellulase treatment with lengths greater than 3 μm. CNFs were further oxidized by TEMPO-oxidized system, and the lengths of the oxidized CNFs (TEMPO-CNFs) were 0.6-1 μm. AFM and TEM images showed that intertwined CNFs fibers were divided into individual nanofibrils. The crystallinity of TEMPO-CNFs increased to 66.5 %. TGA analysis indicated that TEMPO-CNFs were more sensitive to temperature than cellulose and CNFs. FT-IR spectra revealed no changes in the basic cellulose structures of CNFs and TEMPO-CNFs. In the sunflower oil/water (20/80, v/v) model emulsions, the oil droplet sizes were less than 20 μm in CNFs emulsions, which became smaller in TEMPO-CNFs emulsions. Delamination was found in CNFs emulsions after three days of storage. Addition of NaCl increased the volumes of TEMPO-CNFs emulsions but enlarged the oil droplets sizes. TEMPO-CNFs emulsions had the largest volume with smallest and most homogeneous oil droplets at pH 3. TEMPO-CNFs emulsions showed good stability after storage for 30 days. Further, TEMPO-CNFs could also emulsify 50 % (v/v) of sunflower oil. All these results indicated that TEMPO-CNFs can be used in preparing Pickering emulsions.

Electrospun Nanocomposites Containing Cellulose and Its Derivatives Modified with Specialized Biomolecules for an Enhanced Wound Healing

Wound healing requires careful, directed, and effective therapies to prevent infections and accelerate tissue regeneration. In light of these demands, active biomolecules with antibacterial properties and/or healing capacities have been functionalized onto nanostructured polymeric dressings and their synergistic effect examined. In this work, various antibiotics, nanoparticles, and natural extract-derived products that were used in association with electrospun nanocomposites containing cellulose, cellulose acetate and different types of nanocellulose (cellulose nanocrystals, cellulose nanofibrils, and bacterial cellulose) have been reviewed. Renewable, natural-origin compounds are gaining more relevance each day as potential alternatives to synthetic materials, since the former undesirable footprints in biomedicine, the environment, and the ecosystems are reaching concerning levels. Therefore, cellulose and its derivatives have been the object of numerous biomedical studies, in which their biocompatibility, biodegradability, and, most importantly, sustainability and abundance, have been determinant. A complete overview of the recently produced cellulose-containing nanofibrous meshes for wound healing applications was provided. Moreover, the current challenges that are faced by cellulose acetate- and nanocellulose-containing wound dressing formulations, processed by electrospinning, were also enumerated.

Highly dispersive NiCo2S4 nanoparticles anchored on nitrogen-doped carbon nanofibers for efficient hydrogen evolution reaction

To solve the energy crisis problem, many efforts have been devoted to develop clean and sustainable alternatives to fossil fuels. Among varieties of pathways to obtain clean energy, electrochemical water splitting is a promising approach. Herein, we had successfully synthesized the NiCo₂S₄@porous nitrogen-doped carbon nanofibers (NiCo₂S₄@NCNF) nanocomposite via three successive steps consisted of in-situ oxidative polymerization, calcination, and solvothermal sulfuration reaction processes. The effect of controlled molar ratios to electrocatalytic performance was studied in detail. The optimized NiCo₂S₄@NCNF nanocomposite exhibits superior electrocatalytic activity for hydrogen evolution reaction with a small overpotential of 117 mV to drive a current density of 10 mA cm^-2. More importantly, it exhibits similar electrocatalytic activity to the initial state even after successive cyclic voltammetry scan for 3000 cycles, indicating its excellent long-term stability. The superior electrochemical performance is attributed to the developed three-dimensional (3D) network nanostructure derived from bacterial cellulose nanofibers, the highly conductive porous nitrogen-doped carbon nanofibers, and the synergistic effect between metal Ni and Co of NiCo₂S₄. This study permits a new pathway to design efficient electrocatalysts based on eco-friendly materials for the production of clean hydrogen energy.

Opuntia Ficus-Indica L. Miller (Palma Forrageira) as an Alternative Source of Cellulose for Production of Pharmaceutical Dosage Forms and Biomaterials: Extraction and Characterization

Cellulose is among the top 5 excipients used in the pharmaceutical industry. It has been considered one of the main diluents used in conventional and modern dosage forms. Therefore, different raw materials of plant origin have been evaluated as potential alternative sources of cellulose. In this context, Opuntia ficus-indica L. Miller (palma forrageira), a plant of the cactus family that has physiological mechanisms that provide greater productivity with reduced water requirements, is an interesting and unexplored alternative for extracting cellulose. By using this source, we aim to decrease the extraction stages and increase the yields, which might result in a decreased cost for the industry and consequently for the consumer. The aim of this work was to investigate the use of Opuntia ficus-indica L. Miller as a new source for cellulose extraction, therefore providing an efficient, straight forward and low-cost method of cellulose II production. The extraction method is based on the oxidation of the lignins. The obtained cellulose was identified and characterized by spectroscopic methods (FTIR and NMR), X-ray diffraction, thermal analysis (TGA-DTG and DSC) and scanning electron microscopy. The results confirmed the identity of cellulose and its fibrous nature, which are promising characteristics for its use in the industry and a reasonable substrate for chemical modifications for the synthesis of cellulose II derivatives with different physicochemical properties that might be used in the production of drug delivery systems and biomaterials.