Chitosan-based nanoparticles of avermectin to control pine wood nematodes

An assessment of nanotechnology-based interventions for cleaning up toxic heavy metal/metalloid-contaminated agroecosystems: Potentials and issues

Heavy metals (HMs) are among the most dangerous environmental variables for a variety of life forms, including crops. Accumulation of HMs in consumables and their subsequent transmission to the food web are serious concerns for scientific communities and policy makers. The function of essential plant cellular macromolecules is substantially hampered by HMs, which eventually have a detrimental effect on agricultural yield. Among these HMs, three were considered, i.e., arsenic, cadmium, and chromium, in this review, from agro-ecosystem perspective. Compared with conventional plant growth regulators, the use of nanoparticles (NPs) is a relatively recent, successful, and promising method among the many methods employed to address or alleviate the toxicity of HMs. The ability of NPs to reduce HM mobility in soil, reduce HM availability, enhance the ability of the apoplastic barrier to prevent HM translocation inside the plant, strengthen the plant's antioxidant system by significantly enhancing the activities of many enzymatic and nonenzymatic antioxidants, and increase the generation of specialized metabolites together support the effectiveness of NPs as stress relievers. In this review article, to assess the efficacy of various NP types in ameliorating HM toxicity in plants, we adopted a 'fusion approach', in which a machine learning-based analysis was used to systematically highlight current research trends based on which an extensive literature survey is planned. A holistic assessment of HMs and NMs was subsequently carried out to highlight the future course of action(s).

Fabrication and property of the avermectin-attapulgite composites regulated by mixed-surfactants and sodium alginate

OA-AP, DTAB-AP, DDBAB-AP complexes were synthesized by introducing surfactants of OA, DTAB and DDBAB into attapulgite (AP). The complexes were systematically characterized. The appearance of new diffraction peaks at low angle indicated a new lamellar structure of OA (DTAB, DDBAB)-AP complexes. Then, the pesticide avermectin (AV) composites of AV/DTAB-OA-AP, AV/DDBAB-OA-AP, sodium alginate (SA) @AV/DTAB-OA-AP and SA@AV/DDBAB-OA-AP were prepared and investigated detailedly. The basal spacings of AV/DTAB-OA-AP and AV/DDBAB-OA-AP were bigger than those of OA-AP and DTAB(DDBAB)-AP. The existences of AV, surfactants and SA molecules of the composites were further confirmed. Furthermore the effect of SA on AV release behaviors of SA@AV/DTAB (DDBAB)-OA-AP microspheres was investigated and compared. Compared to AV/DTAB (DDBAB)-OA-AP, the released rate of the microspheres decreased remarkably. The AV release behaviors of AV/DTAB (DDBAB)-OA-AP could be fitted with pseudo second-order model, while the first-order model was better to describe those of the microspheres. Finally, the bioassay of the microspheres were studied and analyzed. The microspheres had a longer duration and control effect on Mythimna separata. This study could be helpful to provide a pesticide delivery system to improve the utilization efficiency of pesticides.

Biomass-Based, Dual Enzyme-Responsive Nanopesticides: Eco-friendly and Efficient Control of Pine Wood Nematode Disease

Pine wood nematode (PWN) disease is a globally devastating forest disease caused by infestation with PWN, Bursaphelenchus xylophilus, which mainly occurs through the vector insect Japanese pine sawyer (JPS), Monochamus alternatus. PWN disease is notoriously difficult to manage effectively and is known as the "cancer of pine trees." In this study, dual enzyme-responsive nanopesticides (AVM@EC@Pectin) were prepared using nanocoating avermectin (AVM) after modification with natural polymers. The proposed treatment can respond to the cell wall-degrading enzymes secreted by PWNs and vector insects during pine tree infestation to intelligently release pesticides to cut off the transmission and infestation pathways and realize the integrated control of PWN disease. The LC50 value of AVM@EC@Pectin was 11.19 mg/L for PWN and 26.31 mg/L for JPS. The insecticidal activity of AVM@EC@Pectin was higher than that of the commercial emulsifiable concentrate (AVM-EC), and the photostability, adhesion, and target penetration were improved. The half-life (t1/2) of AVM@EC@Pectin was 133.7 min, which is approximately twice that of AVM-EC (68.2 min). Sprayed and injected applications showed that nanopesticides had superior bidirectional transportation, with five-times higher AVM contents detected in the roots relative to those of AVM-EC when sprayed at the top. The safety experiment showed that the proposed treatment had lower toxicity and higher safety for nontarget organisms in the application environment and human cells. This study presents a green, safe, and effective strategy for the integrated management of PWN disease.

Foliar application of glycine-functionalized nanopesticides for effective prevention and control of root-knot nematodes via a targeted delivery strategy

BACKGROUND

Root-knot nematodes (RKNs) are the highly damaging pests for various crops, and the prevalence of RKNs has posed serious threats to worldwide agricultural harvest, severely affecting global food security and ecosystem health. Traditional pesticide systems on controlling RKNs generally cause environmental hazards and phytotoxicity due to the excessive use of pesticides resulted from low utilization efficiency. And effective approaches with biosafe and efficient features are highly demanded to break away from the dilemma caused by RKNs.

RESULTS

In this research, a nanopesticide system with root-targeted delivery function was developed to achieve effective prevention and control of RKNs. The nanocarriers (MSN-KH560-Gly) and the obtained nanopesticides (EB@MSN-KH560-Gly) were proved to be biosafe. Also, this nanopesticide system demonstrated sustained release behavior. The grafting of glycine (Gly) significantly improved the pesticide contents translocating to cucumber roots (about 304.7%). Besides, such root-targeted delivery function resulted in no root nodule in cucumber plants after the foliar application of these nanopesticides (prevention rate of 100%). In addition, the root nodule numbers of the infected cucumber plants decreased by 71.67%.

CONCLUSION

Foliar application of these Gly-functionalized nanopesticides achieved effective prevention and control of RKNs due to the root-targeted delivery property inherent in this nanopesticide system, and such root-targeted delivery strategy opens a novel and efficient method to protect crops from RKN invasion and thus facilitates the development of sustainable agriculture. © 2023 Society of Chemical Industry.

Fabrication of Eco-Friendly Hydrolyzed Ethylene-Maleic Anhydride Copolymer-Avermectin Nanoemulsion with High Stability, Adhesion Property, pH, and Temperature-Responsive Releasing Behaviors

In this study, novel amphiphilic polymer emulsifiers for avermectin (Avm) were synthesized facilely via the hydrolysis of ethylene-maleic anhydride copolymer (EMA) with different agents, and their structures were confirmed by various techniques. Then, water-based Avm-nanoemulsions were fabricated with the emulsifiers via phase inversion emulsification process, and superior emulsifier was selected via the emulsification effects. Using the superior emulsifier, an optimal Avm-nanoemulsion (defined as Avm@HEMA) with satisfying particle size of 156.8 ± 4.9 nm, encapsulation efficiency (EE) of 69.72 ± 4.01% and drug loading capacity (DLC) of 54.93 ± 1.12% was constructed based on response surface methodology (RSM). Owing to the emulsifier, the Avm@HEMA showed a series of advantages, including high stability, ultraviolet resistance, low surface tension, good spreading and high affinity to different leaves. Additionally, compared to pure Avm and Avm-emulsifiable concentrate (Avm-EC), Avm@HEMA displayed a controlled releasing feature. The encapsulated Avm was released quite slowly at normal conditions (pH 7.0, 25 °C or 15 °C) but could be released at an accelerated rate in weak acid (pH 5.5) or weak alkali (pH 8.5) media or at high temperature (40 °C). The drug releasing profiles of Avm@HEMA fit the Korsmeyer-Peppas model quite well at pH 7.0 and 25 °C (controlled by Fickian diffusion) and at pH 7.0 and 10 °C (controlled by non-Fickian diffusion), while it fits the logistic model under other conditions (pH 5.5 and 25 °C, pH 8.5 and 25 °C, pH 7.0 and 40 °C).

Eco-Efficient Systems Based on Nanocarriers for the Controlled Release of Fertilizers and Pesticides: Toward Smart Agriculture

The excessive application of pesticides and fertilizers has generated losses in biological diversity, environmental pollution, and harmful effects on human health. Under this context, nanotechnology constitutes an innovative tool to alleviate these problems. Notably, applying nanocarriers as controlled release systems (CRSs) for agrochemicals can overcome the limitations of conventional products. A CRS for agrochemicals is an eco-friendly strategy for the ecosystem and human health. Nanopesticides based on synthetic and natural polymers, nanoemulsions, lipid nanoparticles, and nanofibers reduce phytopathogens and plant diseases. Nanoproducts designed with an environmentally responsive, controlled release offer great potential to create formulations that respond to specific environmental stimuli. The formulation of nanofertilizers is focused on enhancing the action of nutrients and growth stimulators, which show an improved nutrient release with site-specific action using nanohydroxyapatite, nanoclays, chitosan nanoparticles, mesoporous silica nanoparticles, and amorphous calcium phosphate. However, despite the noticeable results for nanopesticides and nanofertilizers, research still needs to be improved. Here, we review the relevant antecedents in this topic and discuss limitations and future challenges.

Research Progress of a Pesticide Polymer-Controlled Release System Based on Polysaccharides

In recent years, with the development of the nanomaterials discipline, many new pesticide drug-carrying systems-such as pesticide nano-metal particles, nano-metal oxides, and other drug-carrying materials-had been developed and applied to pesticide formulations. Although these new drug-loading systems are relatively friendly to the environment, the direct exposure of many metal nanoparticles to the environment will inevitably lead to potential effects. In response to these problems, organic nanomaterials have been rapidly developed due to their high-quality biodegradation and biocompatibility. Most of these organic nanomaterials were mainly polysaccharide materials, such as chitosan, carboxymethyl chitosan, sodium alginate, β-cyclodextrin, cellulose, starch, guar gum, etc. Some of these materials could be used to carry inorganic materials to develop a temperature- or pH-sensitive pesticide drug delivery system. Herein, the pesticide drug-carrying system developed based on polysaccharide materials, such as chitosan, was referred to as the pesticide polymer drug-carrying system based on polysaccharide materials. This kind of drug-loading system could be used to protect the pesticide molecules from harsh environments, such as pH, light, temperature, etc., and was used to develop the function of a sustained release, targeted release of pesticides in the intestine of insects, and achieve the goal of precise application, reduction, and efficiency of pesticides. In this review, the recent progress in the field of polysaccharide-based polymer drug delivery systems for pesticides has been discussed, and suggestions for future development were proposed based on the current situation.

Activity of chitin/chitosan/chitosan oligosaccharide against plant pathogenic nematodes and potential modes of application in agriculture: A review

Chemical nematicide is the most common method of controlling plant-parasitic nematodes (PPN). Given the negative impact of chemical nematicides on the environment and ecosystem, it is necessary to seek their alternatives and novel modes of application. Chitin oligo/polysaccharide (COPS), including chitosan and chitosan oligosaccharide, has unique biological properties. By producing ammonia, encouraging the growth of antagonistic bacteria, and enhancing crop tolerance, COPSs help suppress PPN growth during soil remediation. COPS is also an effective sustained-release carrier that can be used to overcome the shortcomings of nematicidal substances. This review summarizes the advancements of COPS research in nematode control from three perspectives of action mechanism as well as in slow-release carrier-loaded nematicides. Further, it discusses potential agricultural applications for nematode disease management.

Advances in stimuli-responsive systems for pesticides delivery: Recent efforts and future outlook

Effective pest management for enhanced crop output is one of the primary goals of establishing sustainable agricultural practices in the world. Pesticides are critical in preventing biological disasters, ensuring crop productivity, and fostering sustainable agricultural production growth. Studies showed that crops are unable to properly utilize pesticides because of several limiting factors, such as leaching and bioconversion, thereby damaging ecosystems and human health. In recent years, stimuli-responsive systems for pesticides delivery (SRSP) by nanotechnology demonstrated excellent promise in enhancing the effectiveness and safety of pesticides. SRSP are being developed with the goal of delivering precise amounts of active substances in response to biological needs and environmental factors. An in-depth analysis of carrier materials, design fundamentals, and classification of SRSP were provided. The adhesion of SRSP to crop tissue, absorption, translocation in and within plants, mobility in the soil, and toxicity were also discussed. The problems and shortcomings that need be resolved to accelerate the actual deployment of SRSP were highlighted in this review.

Chitosan and nematophagous fungi for sustainable management of nematode pests

Plants are exposed to large number of threats caused by herbivores and pathogens which cause important losses on crops. Plant pathogens such as nematodes can cause severe damage and losses in food security crops worldwide. Chemical pesticides were extendedly used for nematode management. However, due to their adverse effects on human health and the environment, they are now facing strong limitations by regulatory organisations such as EFSA (European Food Safety Authority). Therefore, there is an urgent need for alternative and efficient control measures, such as biological control agents or bio-based plant protection compounds. In this scenario, chitosan, a non-toxic polymer obtained from seafood waste mainly, is becoming increasingly important. Chitosan is the N-deacetylated form of chitin. Chitosan is effective in the control of plant pests and diseases. It also induces plants defence mechanisms. Chitosan is also compatible with some biocontrol microorganisms mainly entomopathogenic and nematophagous fungi. Some of them are antagonists of nematode pests of plants and animals. The nematophagous biocontrol fungus Pochonia chlamydosporia has been widely studied for sustainable management of nematodes affecting economically important crops and for its capability to grow with chitosan as only nutrient source. This fungus infects nematode eggs using hyphal tips and appressoria. Pochonia chlamydosporia also colonizes plant roots endophytically, stimulating plant defences by induction of salicylic and jasmonic acid biosynthesis and favours plant growth and development. Therefore, the combined use of chitosan and nematophagous fungi could be a novel strategy for the biological control of nematodes and other root pathogens of food security crops.

One-Step Construct Responsive Lignin/Polysaccharide/Fe Nano Loading System Driven by Digestive Enzymes of Lepidopteran for Precise Delivery of Pesticides

A strategy that relies on the differences in feeding behavior between pests and natural enemies to deliver insecticides precisely was proposed. After proving that the digestive enzymes in Lepidopteran pests can act as triggers for lignin-based controlled-release carriers, a novel multiple-enzyme-responsive lignin/polysaccharide/Fe nanocarrier was constructed by combining the electrostatic self-assembly and chelation and loaded with lambda-cyhalothrin (LC) to form a nanocapsule suspension loading system. The nanocapsules were LC@sodium lignosulfonate/chitosan/Fe (LC@SL/CS/Fe) and LC@sodium lignosulfonate/alkyl polyglycoside quaternary ammonium salt/Fe (LC@SL/APQAS/Fe). LC@SL/APQAS/Fe was more stable than LC@SL/CS/Fe because it adsorbs more Fe³⁺, and the half-lives of LC in LC@SL/APQAS/Fe under UV irradiation were prolonged at 4.02- and 6.03-folds than those of LC@SL/CS/Fe and LC emulsifiable concentrate (LC EC), respectively. Both LC@SL/APQAS/Fe and LC@SL/CS/Fe have responsive release functions to laccase and cellulase, and the release rate of the former was slower. The insecticidal activity of LC@SL/APQAS/Fe against Agrotis ipsilonis was similar to those of LC@SL/CS/Fe and LC EC, while the toxicity of LC@SL/APQAS/Fe to the natural enemy was 2-3 times less than those of LC@SL/CS/Fe and LC EC. Meanwhile, the organic solvent component in the nanocapsule suspension was 94% less than that in the EC preparation. Therefore, the nano loading system based on SL/APQAS/Fe is a promising nanoplatform with the advantages of high efficiency, low toxicity, and environmental friendliness.

Lignin-based non-crosslinked nanocarriers: A promising delivery system of pesticide for development of sustainable agriculture

Lignin sulfonate (LS), a waste material from the paper pulping, was modified with benzoic anhydride to obtain benzoylated lignin sulfonates of adjustable hydrophilicity (BLS). When BLS was combined with difenoconazole (Di), a broad-spectrum fungicide, lignin-based, non-crosslinked nanoparticles were obtained either by solvent exchange or solvent evaporation. When a mass ratio of 1:5 LS: benzoic anhydride was used, the Di release from Di@BLS₅ after 1248 h was ca. 74 %, while a commercial difenoconazole microemulsion (Di ME) reached 100 % already after 96 h, proving the sustained release from the lignin nanocarriers. The formulation of Di in lignin-based nanocarriers also improved the UV stability and the foliar retention of Di compared to the commercial formulation of the fungicide. Bioactivity assay showed that Di@BLS₅ exhibited high activities and duration against strawberry anthracnose (Colletotrichum gloeosporioides). Overall, the construction of fungicide delivery nano-platform using BLS via a simple non-crosslinked approach is a novel and promising way to develop new formulations for nanopesticide and the development of sustainable agriculture.

Selenium nanoparticles are effective in penetrating pine and causing high oxidative damage to Bursaphelenchus xylophilus in pine wilt disease control

BACKGROUND

Research on selenium nanoparticles (SeNPs) in chemical defense and chemotherapy of plants has developed rapidly owing to their high microbial toxicity, environmental safety, and degradability. Pine wilt disease (PWD) threatens pine forests worldwide; however, it is difficult to kill the nematodes (Bursaphelenchus xylophilus) inside the tree that cause PWD using traditional pesticide formulations. SeNPs could be the key to controlling PWD.

RESULTS

In this study, approximately 50 nm SeNPs were prepared using a simple and green method, and chitosan was used to increase their biocompatibility and stability. The preparation and characterization results showed that the prepared SeNPs coated with chitosan (SeNPs@CS) were spherical and evenly dispersed. The bioassay results showed that SeNPs@CS had an LC₅₀ of 15.627 mg L^-1 against B. xylophilus. In addition, the killing mechanism of SeNPs@CS against B. xylophilus was studied. Confocal microscopy and transmission electron microscopy demonstrated that B. xylophilus were killed by reactive oxygen species, and the penetration of nano-form materials to B. xylophilus was higher than that of non-nano-form materials. To verify the effective penetration of SeNPs in pine tissues, Cy5-labeled SeNPs@CS was observed inside pine needles and branches using frozen sections and confocal microscopy. In addition, the cytotoxicity of SeO₂ and SeNPs@CS was tested, and the results showed that the cytotoxicity of SeNPs@CS to MC3T3-E1 cells was reduced.

CONCLUSION

These results show that SeNPs are expected to be used as a new strategy for the control of PWD with oxidative damage and high penetration to B. xylophilus and effective target penetration and biosafety. © 2022 Society of Chemical Industry.

Biopolymeric Nanoparticles-Multifunctional Materials of the Future

Nanotechnology plays an important role in biological research, especially in the development of delivery systems with lower toxicity and greater efficiency. These include not only metallic nanoparticles, but also biopolymeric nanoparticles. Biopolymeric nanoparticles (BPNs) are mainly developed for their provision of several advantages, such as biocompatibility, biodegradability, and minimal toxicity, in addition to the general advantages of nanoparticles. Therefore, given that biopolymers are biodegradable, natural, and environmentally friendly, they have attracted great attention due to their multiple applications in biomedicine, such as drug delivery, antibacterial activity, etc. This review on biopolymeric nanoparticles highlights their various synthesis methods, such as the ionic gelation method, nanoprecipitation method, and microemulsion method. In addition, the review also covers the applications of biodegradable polymeric nanoparticles in different areas-especially in the pharmaceutical, biomedical, and agricultural domains. In conclusion, the present review highlights recent advances in the synthesis and applications of biopolymeric nanoparticles and presents both fundamental and applied aspects that can be used for further development in the field of biopolymeric nanoparticles.

Effects of Methoxyfenozide-Loaded Fluorescent Mesoporous Silica Nanoparticles on Plutella xylostella (L.) (Lepidoptera: Plutellidae) Mortality and Detoxification Enzyme Levels Activities

The diamond back moth, Plutella xylostella, causes severe damage at all crop stages, beside its rising resistance to all insecticides. The objective of this study was to look for a new control strategy such as application of insecticide-loaded carbon dot-embedded fluorescent mesoporous silica nanoparticles (FL-SiO₂ NPs). Two different-sized methoxyfenozide-loaded nanoparticles (Me@FL-SiO₂ NPs-70 nm, Me@FL-SiO₂ NPs-150 nm) were prepared, with loading content 15% and 16%. Methoxyfenozide was released constantly from Me@FL-SiO₂ NPs only at specific optimum pH 7.5. The release of methoxyfenozide from Me@FL-SiO₂ NPs was not observed other than this optimum pH, and therefore, we checked and controlled a single release condition to look out for the different particle sizes of insecticide-loaded NPs. This pH-responsive release pattern can find potential application in sustainable plant protection. Moreover, the lethal concentration of the LC₅₀ value was 24 mg/L for methoxyfenozide (TC), 14 mg/L for Me@FL-SiO₂ NPs-70 nm, and 15 mg/L for Me@FL-SiO₂ NPs-150 nm after 72 h exposure, respectively. After calculating the LC₅₀, the results predicted that Me@FL-SiO₂ NPs-70 nm and Me@FL-SiO₂ NPs-150 nm exhibited better insecticidal activity against P. xylostella than methoxyfenozide under the same concentrations of active ingredient applied. Moreover, the activities of detoxification enzymes of P. xylostella were suppressed by treatment with insecticide-loaded NPs, which showed that NPs could also be involved in reduction of enzymes. Furthermore, the entering of FL-SiO₂ NPs into the midgut of P. xylostella was confirmed by confocal laser scanning microscope (CLSM). For comparison, P. xylostella under treatment with water as control was also observed under CLSM. The control exhibited no fluorescent signal, while the larvae treated with FL-SiO₂ NPs showed strong fluorescence under a laser excitation wavelength of 448 nm. The reduced enzyme activities as well as higher cuticular penetration in insects indicate that the nano-based delivery system of insecticide could be potentially applied in insecticide resistance management.

Potential Applications of Engineered Nanoparticles in Plant Disease Management: A Critical Update

Plant diseases caused by pathogenic entities pose severe issues to global food security. Effective sensory applications and tools for the effective determination of plant diseases become crucial to the assurance of food supply and agricultural sustainability. Antibody-mediated molecular assays and nucleic acid are gold-standard approaches for plant disease diagnosis, but the evaluating methodologies are liable, complex, and laborious. With the rise in global food demand, escalating the food production in threats of diverse pathogen ranges, and climate change is a major challenge. Engineered nanoparticles (NPs) have been inserted into conventional laboratory sequence technologies or molecular assays that provide a remarkable increment in selectivity and sensitivity. In the present scenario, they are useful in plant disease management as well as in plant health monitoring. The use of NPs could sustainably mitigate numerous food security issues and or threats in disease management by decreasing the risk of chemical inputs and alleviating supra detection of pathogens. Overall, this review paper discusses the role of NPs in plant diseases management, available commercial products. Additionally, the future directions and their regulatory laws in the usage of the nano-diagnostic approach for plant health monitoring have been explained.

Cyclodextrin mediated controlled release of edaravone from pH-responsive sodium alginate and chitosan based nanocomposites

The objective of the study is to enhance the aqueous solubility and stability of edaravone, a free radical scavenger drug. Inclusion complexes of edaravone with β-cyclodextrin were prepared by microwave irradiation and physical mixture method and confirmation of inclusion complexes were investigated by different analytical techniques such as FT-IR, ROESY, DSC, and ¹H NMR. pH-sensitive nanocomposites based on chitosan (CH), sodium alginate (ALG), and bentonite (BN) were synthesized. To get the maximum percentage swelling different reaction parameters that are responsible for the synthesis of the nanocomposite were optimized and characterized by various techniques such as FESEM, EDS, XRD, and FT-IR. To regulate the drug delivery, inclusion complexes were directly loaded into the CH/ALG hydrogel, and CH/ALG/BN nanocomposite and release studies were evaluated at different pH environments. The solubility of edaravone was investigated by phase solubility and the graph results in a typical A_L type behavior, suggesting the formation of a 1:1 stoichiometry inclusion complex. The comparative evaluation of drug release was explored by kinetic models. Controlled release of drug was achieved from CH/ALG/BN nanocomposite in comparison to CH/ALG hydrogel. The exploratory kinetic investigation revealed that β-CD plays a critical role in the drug release process by influencing polymer relaxation, resulting in slow release.

Hyaluronic Acid Coated Chitosan Nanoparticles for Insulin Oral Delivery: Fabrication, Characterization and Hypoglycemic Ability

Oral administration of insulin faces multiple biological challenges, such as varied digestive environments, mucin exclusion and low epithelial cells absorption. In the present study, a hyaluronic acid coated chitosan nanoparticle delivery system was fabricated for insulin oral delivery. It is hypothesized that the developed nanoparticles will protect insulin from digestive degradation, promote intestinal epithelial cell absorption and exert strong in vivo hyperglycemic ability. Nanoparticles formulated by chitosan (CS) and sodium tripolyphosphate (TPP) was optimized to form the core nanoparticles (CNP). Hyaluronic acid (HA) was further applied to coat CNP (HCP) to improve stability, reduce enzymatic degradation and promote absorption of insulin. HCP promoted insulin uptake by Caco-2 cells, absorbed less mucin and improved intestinal absorption. Moreover, in vivo test demonstrated that oral administration of insulin-loaded HCP exerts strong and continuous hyperthermia effect (with PA of 13.8%). In summary, HCP is a promising delivery platform for insulin oral administration in terms of protecting insulin during digestion, facilitating its absorption and ultimately promoting its oral bioavailability. This article is protected by copyright. All rights reserved.

Nano-enabled agrochemicals/materials: Potential human health impact, risk assessment, management strategies and future prospects

Nanotechnology is a rapidly developing technology that will have a significant impact on product development in the next few years. The technology is already being employed in cutting-edge cosmetic and healthcare products. Nanotechnology and nanoparticles have a strong potential for product and process innovation in the food industrial sector. This is already being demonstrated by food product availability made using nanotechnology. Nanotechnologies will have an impact on food security, packaging materials, delivery systems, bioavailability, and new disease detection materials in the food production chain, contributing to the UN Millennium Development Goals targets. Food products using nanoparticles are already gaining traction into the market, with an emphasis on online sales. This means that pre- and post-marketing regulatory frameworks and risk assessments must meet certain standards. There are potential advantages of nanotechnologies for agriculture, consumers and the food industry at large as they are with other new and growing technologies. However, little is understood about the safety implications of applying nanotechnologies to agriculture and incorporating nanoparticles into food. As a result, policymakers and scientists must move quickly, as regulatory systems appear to require change, and scientists should contribute to these adaptations. Their combined efforts should make it easier to reduce health and environmental impacts while also promoting the economic growth of nanotechnologies in the food supply chain. This review highlighted the benefits of a number of nano enabled agrochemicals/materials, the potential health impacts as well as the risk assessment and risk management for nanoparticles in the agriculture and food production chain.

Development of chitosan-coated nanoemulsions of two sulfides present in onion (Allium cepa) essential oil and their nematicidal activities against the pine wood nematode, Bursaphelenchus xylophilus

Pine wood nematode, Bursaphelenchus xylophilus, is a plant parasitic nematode which causes severe damage to several Pinus species. Two natural compounds, dipropyl trisulfide (DPTS) and methyl propyl trisulfide (MPTS), showed strong nematicidal activity against the pine wood nematode, presenting 4.24 and 17.81 μg/mL LC₅₀ values, respectively. However, hydrophobicity and low stability have limited their practical use in the field as nematicides. To overcome these problems, chitosan-coated nanoemulsions of DPTS and MPTS were developed. The optimum chitosan concentration for the delivery system of the two sulfides was 0.5%. Optimized chitosan-coated nanoemulsions of sulfides have a uniform size distribution (mean diameter = 203.7 and 207.7 nm, mean polydispersity index = 0.176 and 0.178) with sufficient colloidal stability (mean zeta potential = +40 and +45 mV). The LC₅₀ values of DPTS and MPTS nanoemulsions coated with 0.5% chitosan against the pine wood nematode were 5.01 and 16.60 μg/mL, respectively. In addition, chitosan coating improved the long-term storage stability and persistence of nematicidal activity of the nanoemulsions. This study indicates that the chitosan-coated nanoemulsion is a suitable formulation for sulfides as novel nematicides against the pine wood nematode for field application.

Basic Amino Acid-Modified Lignin-Based Biomass Adjuvants: Synthesis, Emulsifying Activity, Ultraviolet Protection, and Controlled Release of Avermectin

Avermectin (AVM) is a highly effective and safe biopesticide but is very sensitive to ultraviolet (UV) light and exhibits poor water solubility. Developing green and multifunctional adjuvants is important for the protection and controlled release of AVM. In this work, a number of water-soluble enzymatic hydrolysis lignins (W-EHLs) were prepared via grafting basic amino acids and used as emulsifiers with co-surfactants to prepare high-internal phase emulsions (HIPEs). The results showed that W-EHLs with co-surfactants could be prepared with HIPEs that contained 90 vol % green oil phases such as turpentine, and the stability of the HIPEs first increased and then decreased when the rate of grafting of basic amino acids on lignin increased from 0.26 to 1.46 mmol/g. The more polar oil droplets were less deformable due to their higher viscosity, thereby affording a stability advantage to HIPEs. Subsequently, the relations between the stability and interfacial viscoelasticity of the emulsion were effectively correlated by interfacial rheology, droplet size, and physical stability tests. The results showed that HIPEs with smaller droplets had poor fluidity and strong interfacial viscoelasticity due to their higher droplet packing density, which resulted in good macroscopic stability. Like the AVM carrier, the retention rate of AVM in HIPEs was 80.1% after UV radiation for 72 h, which represented the highest UV protection efficiency in AVM delivery systems. The release curves showed that the rate of release of AVM from HIPEs was adjusted by controlling the pH value of the medium. In addition, the release of HIPEs is completely in accord with both diffusion and the matrix erosion mechanism. The strategy could be extended to other sensitive pesticides and used to promote the development of sustainable agriculture.

Molecular characterization and functional analysis of multidrug resistance-associated genes of Pinewood nematode (Bursaphelenchus xylophilus) for nematicides

Bursaphelenchus xylophilus (Pinewood nematode, PWN) is the causative agent of pine wilt disease (PWD) which caused serious threat to pine forests in the world, especially in East Asia and Western Europe. At present, the control of PWD mainly rely on the massive use of pesticide despite the damage to human health and environmental safety. Developing novel drug targets is the optimized strategy for developing new method to control PWN. In this study, four multidrug resistance-associated protein (MRP) genes containing highly conserved MRP-associated domains were cloned from PWN. The expression patterns of the four Bx-mrps under three different nematicides treatments were studied by quantitative reverse transcription PCR (qRT-PCR) and the function of the four genes in multidrug resistance were also validated by RNA interference (RNAi). Results showed that the expression of Bx-mrp1, Bx-mrp2, Bx-mrp3, and Bx-mrp4 were significantly increased when exposed to different nematicides, wherein, Bx-mrp4 exposed by 4.0 mg/mL of matrine own the highest expression level. The mortality rates of Bx-mrps silenced nematodes revealed significant increase(P < 0.05)under matrine, avermectin, and emamectin benzoate exposure. Specially, Bx-mrp4 exposed with 4.0 mg/mL matrine for 24 h own the highest mortality increase by 18.34%. After RNAi of Bx-mrps, feeding ability of the nematodes were also significantly decreased. These results demonstrate that Bx-mrps were linked to the detoxification process and feeding behavior of PWN. Silencing of Bx-mrps can lead to increased sensitivity of PWN to nematicides and decrease its feeding ability. Bx-mrps are potential new PWN control targets in the future.

Understanding the effects of copolymerized cellulose nanofibers and diatomite nanocomposite on blend chitosan films

Chitosan films lack various important physicochemical properties and need to be supplemented with reinforcing agents to bridge the gap. Herein, we have produced chitosan composite films supplemented with copolymerized (with polyacrylonitrile monomers) cellulose nanofibers and diatomite nanocomposite at different concentrations. The incorporation of CNFs and diatomite enhanced the physicochemical properties of the films. The mechanical characteristics and hydrophobicity of the films were observed to be improved after incorporating the copolymerized CNFs/diatomite composite at different concentrations (CNFs: 1%, 2% and 5%; diatomite: 10% and 30%). The antioxidant activity gradually increased with an increasing concentration (1-5% and 10-30%) of copolymerized CNFs/diatomite composite in the chitosan matrix. Moreover, the water solubility decreased from 30% for chitosan control film (CH-0) to 21.06% for films containing 30% diatomite and 5% CNFs (CNFs-D30-5). The scanning electron micrographs showed an overall uniform distribution of copolymerized CNFs/diatomite composite in the chitosan matrix with punctual agglomerations.

Chitin and chitosan on the nanoscale

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Nanomaterials and Essential Oils as Candidates for Developing Novel Treatment Options for Bovine Mastitis

Nanomaterials have been used for diagnosis and therapy in the human medical field, while their application in veterinary medicine and animal production is still relatively new. Nanotechnology, however, is a rapidly growing field, offering the possibility of manufacturing new materials at the nanoscale level, with the formidable potential to revolutionize the agri-food sector by offering novel treatment options for prevalent and expensive illnesses such as bovine mastitis. Since current treatments are becoming progressively more ineffective in resistant bacteria, the development of innovative products based on both nanotechnology and phytotherapy may directly address a major global problem, antimicrobial resistance, while providing a sustainable animal health solution that supports the production of safe and high-quality food products. This review summarizes the challenges encountered presently in the treatment of bovine mastitis, emphasizing the possibility of using new-generation nanomaterials (e.g., biological synthesized nanoparticles and graphene) and essential oils, as candidates for developing novel treatment options for bovine mastitis.

Current trends and challenges in the synthesis and applications of chitosan-based nanocomposites for plants: A review

Chitosan, a low-cost and multipurpose polymer with numerous desired physicochemical and biological properties has been tested for various applications in agriculture, pharmacy, and biomedicine industries. The availability of functional groups along the backbone makes chitosan readily available for other polymers and metal ions to form bio-nanocomposites. Different types of chitosan-based nanocomposites have been designed and tested for the enhancement of chitosan efficiency and ultimately widening the application areas of chitosan in plants. These nanocomposites serve different purposes such as eliciting plant's defence systems against different threats (pathogen attack), antimicrobial agent against bacteria, fungi and viruses, enhancement of nutrient uptake by plants, control release of micro/macronutrients, fungicides and herbicides. In this review, an extensive outlook has been provided (mainly in the last five years) to recent trends and advances in the fabrication and application of chitosan-based composites. Finally, current challenges and future development opportunities of chitosan-based nanocomposites for plants are discussed.

A temperature-responsive release cellulose-based microcapsule loaded with chlorpyrifos for sustainable pest control

Controlled pesticide release in response to environmental stimuli by encapsulating pesticide in carrier is a feasible approach to improve the effective utilization rate. Here, a temperature-responsive release microcapsule loaded with chlorpyrifos (CPF@CM) was prepared from n-hexadecane-in-water emulsions via interfacial polymerization. The microcapsule was consisted of nanofibrillated cellulose (NFC) as the shell wall material and isophorone diisocyanate (IPDI) as the crosslinker. The prepared CPF@CM had pesticide-loading efficiency (33.1 wt%) and favorable adhesion on the surface of cucumber and peanut foliage compared with conventional formulation. Additionally, CPF@CM could protect chlorpyrifos against photodegradation effectively. The in vitro release test showed that microcapsule had adjustable controlled-release characteristics with the change in temperature based on phase transition of the n-hexadecane core. Bioassay studies showed that control efficacy of CPF@CM microcapsule against P. xylostella was positively correlated with temperature because of temperature-induced changes in release rate. The acute toxicity of CPF@CM to zebrafish was reduced more than 5-fold compared with that of CPF technical. These results indicated that the microcapsule release system has great potential in the development of an effective and environmentally friendly pesticide formulation.

Natural rosin modified carboxymethyl cellulose delivery system with lowered toxicity for long-term pest control

The increasing world-wide demand for food has prompted the development of efficient and environmentally friendly pesticide formulations. In this article, we have prepared CMC-g-PRSG carrier based on two compounds from natural materials carboxymethyl cellulose (CMC) and rosin (RS). The model pesticide avermectin (AVM) was encapsulated through hydrophobic interaction, and self-assembled to form nanopesticide AVM@CMC-g-PRSG with an average particle size of 167 nm. The prepared nanopesticide displays enhanced dispersibility and stability of AVM in water, and can effectively adhere to the leaves to prevent loss. The release rate of AVM encapsulated in the nanocarrier can be controlled by adjusting pH, and AVM half-life under ultraviolet radiation shows a 3-fold increase allowing control of pests for prolonged periods of time in practical applications. Biological safety tests showed that AVM@CMC-g-PRSG effectively reduces the toxicity of AVM to aquatic animals. Therefore, the cheap and degradable carrier CMC-g-PRSG can improve the effect of hydrophobic pesticides.

3D, eco-friendly metal-organic frameworks@carbon nanotube aerogels composite materials for removal of pesticides in water

To alleviate the secondary risks of using metal-organic frameworks (MOFs) nanoparticles as adsorbent, a novel method of loading two MOFs (ZIF-8 or UiO66-NH₂) on the carbon nanotube aerogels (MPCA) by in situ nucleation and growth of MOFs nanoparticles onto carbon nanotubes were developed. The prepared MOFs@MPCA aerogels were well characterized via SEM, TEM, EDS, FT-IR, XRD and XPS to reveal the microstructure and formation mechanism of MOF@MPCA. Besides, the hydrophilia, mechanical property and thermostability of MOF@MPCA were investigated. The results showed that MOF@MPCA had good hydrophilia, compression resilience and thermostability. The study on the ability to adsorb herbicides (chipton and alachlor) showed that the adsorption capacity of MOF@MPCA was stronger compared with single MOFs nanoparticles, which indicated that there was a synergistic effect between MOFs and MPCA. The equilibrium adsorption capacity of chipton adsorbed by UiO66-NH₂@MPCA was 227.3 mg/g, and can be expediently reused for 5 cycles without a significant decrease in adsorption performance. Moreover, the results of biosafety experiments showed that MPCA can reduce the risk of MOFs nanoparticles leakage into the environment and accumulation in organisms. This work can provide a new research idea, which has potential applications to remove pollutants effectively and safely from the environment.

Development of abamectin-loaded nanoemulsion and its insecticidal activity and cytotoxicity

BACKGROUND

Owing to the advantages of high-efficiency, environmental protection and safety, nanoemulsions have become a highly popular water-insoluble pesticide delivery system in recent years.

RESULTS

In this study, abamectin-loaded nanoemulsion with remarkable physical stability and application performance was obtained by selecting the type and concentration of surfactant and the emulsification method. The optimal formula was 2% abamectin and 5% castor oil polyoxyethylene (EL-40) dissolved in 7.5% hydrocarbon solvent (S-200) made up to 100% with deionized water, which conformed to the quality indicators from the Food and Agriculture Organization (FAO) standards. Droplets on cabbage leaves showed a small dynamic contact angle, which ensured that the resulting nanoemulsion exhibited excellent wettability and diffusivity. Compared with emulsifiable concentrates (EC) and microemulsions (ME), the abamectin-loaded nanoemulsion had the lowest LC₅₀ (0.0686 mg L^-1 ) to third-instar larva of Plutella xylostella, causing the larval body to blacken and shrivel, which improved insecticidal activity. In addition, the abamectin-loaded nanoemulsion had low cytotoxicity. The viability of dendritic cells with added nanoemulsion reached 100% after 2 h, whereas that of cells with EC and ME was lower. After 24 h, the cell viability of dendritic cells with added ME was 0.

CONCLUSION

This research facilitated the design and fabrication of nanoemulsions for water-insoluble pesticide to enhance insecticidal activity, lower cytotoxicity and reduce environmental pollution. © 2020 Society of Chemical Industry.

Lignin-Modified Electronegative Epoxy Resin Nanocarriers Effectively Deliver Pesticides against Plant Root-Knot Nematodes (Meloidogyne incognita)

It is highly desirable to fabricate a pesticide delivery system with excellent permeability to reduce the damage caused by root-knot nematodes in the soil. In this work, a novel electronegative pesticide nanocarrier was established by bonding anionic lignosulfonate with epoxy resin nanocarriers, which were loaded with abamectin (Aba). The results demonstrated that nanoparticles were negatively charged (-38.4 mV) spheres with an average size of 150 nm, and the encapsulation efficiency of nanocarriers for Aba was 93.4%. Polymer nanocarriers could prevent premature release of Aba and protect active ingredients from microbiological degradation. The adsorption strength of the soil to Aba loaded in nanocarriers was reduced by 6 to 10 times, so nanonematicides have remarkable soil mobility. Meanwhile, nanoparticles could easily penetrate the roots and nematodes. The application test confirmed that the control effect of this nanopesticide was 26-40% higher than that of the other agrochemicals. In consideration of its superior bioactivity and utilization rate, this pesticide delivery system has promising potential to control root-knot nematodes and improve the pesticide's utilization efficiency.

Poly-γ-glutamic acid derived nanopolyplexes for up-regulation of gamma-glutamyl transpeptidase to augment tumor active targeting and enhance synergistic antitumor therapy by regulating intracellular redox homeostasis

The active targeting strategy has achieved inspiring progress for drug accumulation in tumor therapy; however, the insufficient expression level of many potential receptors poses challenges for drug delivery. Poly-γ-glutamic acid (γ-pGluA), a naturally occurring anionic biopolymer, showed high affinity with tumor-associated gamma-glutamyl transpeptidase (GGT), which localized on the cell surface and exhibited intracellular redox homeostasis-dependent expression pattern; thus, GGT was utilized for mediating endocytosis of nanoparticles. Herein, GGT-targeting nanopolyplexes (γ-pGluA-CSO@Fe³⁺, PCFN) consisting of cationic chitosan and GGT-targeting γ-pGluA blended with iron ion were constructed to load reactive oxygen species-induced menadione (MA) and doxorubicin, which were utilized to investigate the mechanism of GGT up-regulation. Briefly, the pretreated PCFN/MA induced an intracellular oxidative stress environment, which facilitated adjusted up-regulated GGT expression and boosted tumor targeting. Subsequently, the destroyed redox homeostasis sensitized tumors for synergistic therapy. The innovative strategy of augmenting active targeting by disturbing intracellular redox homeostasis offers insight for the application of γ-pGluA-derived nanopolyplexes.

Indoxacarb-loaded fluorescent mesoporous silica nanoparticles for effective control of Plutella xylostella L. with decreased detoxification enzymes activities

BACKGROUND

Plutella xylostella L. is a cosmopolitan lepidopteron insect pest for numerous vegetables and crops. The extensive use of insecticides has resulted in the emergence of resistance in P. xylostella. Thus, development of innovative strategies to overcome the insecticide resistance and control P. xylostella effectively is highly desirable. Inspired by the concept and breakthrough of nanomedical strategies to treat multidrug resistance, nanotechnology may find potential application in overcoming or delaying insecticide resistance.

RESULTS

Carbon dots-embedded fluorescent mesoporous silica nanoparticles (FL-SiO₂ NPs) were successfully developed. Indoxacarb-loaded nanoparticles (IN@FL-SiO₂ NPs) were facilely prepared with loading content of 24%. The release of indoxacarb from IN@FL-SiO₂ NPs was pH sensitive. IN@FL-SiO₂ NPs exhibited better insecticidal activity against P. xylostella than indoxacarb technical under the same doses of active ingredient applied. Moreover, the activities of detoxification enzymes including GST, CarE, and P450 of P. xylostella were suppressed by treatment with IN@FL-SiO₂ NPs. Furthermore, the entry of FL-SiO₂ NPs into the midgut of P. xylostella was confirmed by CLSM observation.

CONCLUSIONS

Although there is no absolute correlation between the enzyme activity and resistance, the change in corresponding enzyme activity can afford valuable information on the resistance situation. IN@FL-SiO₂ NPs treated P. xylostella displayed higher mortality, along with decreased enzymes activities, which indicates that nano-based delivery system of insecticide could be potentially applied in insecticide resistance management. © 2020 Society of Chemical Industry.

Economic Loss of Pine Wood Nematode Disease in Mainland China from 1998 to 2017

The occurrence and prevalence of pine wood nematode disease has had a great impact on China’s forestry production and ecological environment, but the quantitative evaluation of the economic losses of this biological disease is lacking from a macro-geographic scale and long-term series perspective. This study establishes a pine wood nematode disease economic loss evaluation index system, covering the loss of natural ecology, landscape aesthetics and economic production, and quantitatively evaluates the economic losses of pine wood nematode disease in mainland China at a provincial level from 1998 to 2017. The results show that the economic losses of the pine wood nematode disease in China showed a fluctuant rising trend from 1998, since 2013, it has entered a full-scale outbreak phase, and since 2015, the economic loss has increased significantly, with a growth rate higher than 40%. The average annual total economic loss is CNY 7.17 billion, of which the direct economic losses is CNY 1.53 billion, and the indirect economic losses is CNY 5.64 billion. The loss of forest material resources, the expenditure of ineffective forest management expenditure and prevention and control expenditure were CNY 817 million, CNY 649 million, and CNY 67 million, respectively. Regulate service value loss, support service value loss and cultural service loss are CNY 3.95 billion, CNY 1.41 billion, CNY 276 million, respectively. East China and South China suffered the most due to pine wood nematode disease, and the economic loss of these regions accounted for 79.9% of the total national economic losses. Among them, Zhejiang Province, Guangdong Province and Jiangsu Province lost CNY 2.14 billion, CNY 1.81 billion, and CNY 1.22 billion, respectively, accounting for 26.8%, 22.7% and 15.3% of the total national economic loss.

Fabrication and characterization of lignin-xylan hybrid nanospheres as pesticide carriers with enzyme-mediated release property

Lignin nanospheres (LNPs) are an emerging high-value material platform to realize lignin valorization. The modification or introduction of new functions to LNPs is of great significance to expand its downstream applications. This work evaluated the technical feasibility of preparing lignin-xylan hybrid nanospheres (LXNPs) through a simple solution-based self-assembly process, with the goal of achieving the application as pesticide carriers for enzyme-mediated controlled release. Hybrid LXNPs with various weigh ratios (lignin to xylan, 3 : 1, 1 : 1, 1 : 3) were obtained using deep eutectic solvent-extracted condensed lignin and water-insoluble xylan fragments, which exhibited a nanosphere size of about 166-210 nm with considerable stability in the pH range of 4-10. LXNPs with lignin to xylan ratios of 3 : 1 and 1 : 1 showed well-defined core-shell structures with enriched hydroxyl groups on the surface. It was proposed that lignin could anchor xylan fragments through van der Waals force and hydrophobic interactions between lignin phenylpropanes and xylan molecular backbones, thus facilitating the self-assembly process for the formation of this specific spherical structure. The resulting hydrophobic LXNPs core enabled the facile encapsulation of the biological pesticide avermectin (AVM) with 57.9-67.0% efficiency using one-pot synthesis. When these AVM-encapsulated LXNPs were subjected to enzymatic hydrolysis using xylanase, considerable AVM release of 44.8-55.1% was achieved after 16 h, in comparison to the 4.1% release only for those without xylanase. This work showed the high promise of fabricating hybrid LXNPs through the self-assembly process and also provided a universal nanosphere carrier for drug encapsulation and subsequent enzyme-mediated controlled release.

Fabrication of abamectin-loaded mesoporous silica nanoparticles by emulsion-solvent evaporation to improve photolysis stability and extend insecticidal activity

Mesoporous silica nanoparticles (MSNs) can be designed to effectively load, protect, and control the release of pesticides. In this study, emulsion-solvent evaporation was used to fabricate abamectin-loaded MSNs. Our method could deliver abamectin in the process of MSN self-assembly, resulting in simple operation, short preparation period, and outstanding drug carrying capacity. The characteristics of abamectin-loaded MSNs, including morphology, loading content, stability against photolysis, controlled release behavior, and toxicological effect, were systematically investigated. Abamectin-loaded MSNs were successfully produced, having spherical shape, rough surface, uniform particle sizes, typically hollow structure, high loading efficiency (44.8%), excellent photodegradation-reducing ability, and controlled-release properties. The biological activity survey for abamectin-loaded MSNs showed excellent toxicological properties against Plutella xylostella larvae, and maintained biological activity until the 15th day, with 70% mortality of the target insect. The results of this study are beneficial for the development of a delivery system for the rational and effective usage of pesticides.

Bio-Based Lignin Nanocarriers Loaded with Fungicides as a Versatile Platform for Drug Delivery in Plants

Lignin-based nano- and microcarriers are a promising biodegradable drug delivery platform inside of plants. Many wood-decaying fungi are capable of degrading the wood component lignin by segregated lignases. These fungi are responsible for severe financial damage in agriculture, and many of these plant diseases cannot be treated today. However, enzymatic degradation is also an attractive handle to achieve a controlled release of drugs from artificial lignin vehicles. Herein, chemically cross-linked lignin nanocarriers (NCs) were prepared by aza-Michael addition in miniemulsion, followed by solvent evaporation. The cross-linking of lignin was achieved with the bio-based amines (spermine and spermidine). Several fungicides-namely, azoxystrobin, pyraclostrobin, tebuconazole, and boscalid-were encapsulated in situ during the miniemulsion polymerization, demonstrating the versatility of the method. Lignin NCs with diameters of 200-300 nm (determined by dynamic light scattering) were obtained, with high encapsulation efficiencies (70-99%, depending on the drug solubility). Lignin NCs successfully inhibited the growth of Phaeomoniella chlamydospora and Phaeoacremonium minimum, which are lignase-producing fungi associated with the worldwide occurring fungal grapevine trunk disease Esca. In planta studies proved their efficiency for at least 4 years after a single injection into Vitis vinifera ("Portugieser") plants on a test vineyard in Germany. The lignin NCs are of high interest as biodegradable delivery vehicles to be applied by trunk injection against the devastating fungal disease Esca but might also be promising against other fungal plant diseases.

Structure Regulation of Bentonite-Alginate Nanocomposites for Controlled Release of Imidacloprid

To reveal the structure and release properties of bentonite-alginate nanocomposites, bentonite of different amounts was incorporated into alginate by the sol-gel route. The structure of the composites was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis and related to the swelling property of the matrix and the release of imidacloprid. Bentonite was subject to exfoliation into nanoplatelets and combined into the polymeric network within alginate hydrogel, exhibiting profound effects on the structure features and release properties of the composites. Bentonite was of good compatibility with alginate due to the hydrogen bonding and the electrostatic attraction between them. The polymer chains were found to intercalate into the interlayer gallery of the clay. The high specific area of the nanoplatelets of bentonite benefited the intimate contact with alginate and reduced the permeability of the composites. However, in the composites with clay content of more than 10%, the polymer was insufficient to accommodate the silicate sheets completely. The aggregation of the platelets destroyed the structure integrity of the composites, facilitating the diffusion of the pesticide. The release of imidacloprid was greatly retarded by incorporating into bentonite-alginate composites and dominated by Fickian diffusion depending on the permeability of the matrix. The time taken for 50% of the active ingredient to be released, T 50, first increased and then decreased with increasing clay content in the composites, reaching a maximum around a weight percentage of 10%, at which the T 50 value for imidacloprid release was about 2.5 times that for the release from pure alginate formulation.

Chitosan-Based Agronanochemicals as a Sustainable Alternative in Crop Protection

The rise in the World's food demand in line with the increase of the global population has resulted in calls for more research on the production of sustainable food and sustainable agriculture. A natural biopolymer, chitosan, coupled with nanotechnology could offer a sustainable alternative to the use of conventional agrochemicals towards a safer agriculture industry. Here, we review the potential of chitosan-based agronanochemicals as a sustainable alternative in crop protection against pests, diseases as well as plant growth promoters. Such effort offers better alternatives: (1) the existing agricultural active ingredients can be encapsulated into chitosan nanocarriers for the formation of potent biocides against plant pathogens and pests; (2) the controlled release properties and high bioavailability of the nanoformulations help in minimizing the wastage and leaching of the agrochemicals' active ingredients; (3) the small size, in the nanometer regime, enhances the penetration on the plant cell wall and cuticle, which in turn increases the argochemical uptake; (4) the encapsulation of agrochemicals in chitosan nanocarriers shields the toxic effect of the free agrochemicals on the plant, cells and DNA, thus, minimizing the negative impacts of agrochemical active ingredients on human health and environmental wellness. In addition, this article also briefly reviews the mechanism of action of chitosan against pathogens and the elicitations of plant immunity and defense response activities of chitosan-treated plants.

Biostimulants for Plant Growth Promotion and Sustainable Management of Phytoparasitic Nematodes in Vegetable Crops

The parasitism of root-knot nematodes, Meloidogyne spp., can cause heavy yield losses to vegetable crops. Plant biostimulants are often reported for a side-suppressive effect on these pests and many commercial products are increasingly included in sustainable nematode control strategies. Source materials of most biostimulants derived from plant or seaweed raw materials were documented for a reliable suppression of root-knot nematode species, whereas the suppressiveness of microbial biostimulants was found largely variable, as related to the crop and to environmental factors. Chitosan-based biostimulants were also stated for a variable phytonematode suppression, though clearly demonstrated only by a few number of studies. In a preliminary experimental case study, four commercial biostimulants based on quillay extract (QE), sesame oil (SO), seaweeds (SE), or neem seed cake (NC) were comparatively investigated for their effects against the root-knot nematode M. incognita on potted tomato. Soil treatments with all the four biostimulants resulted in a significant reduction of nematode eggs and galls on tomato roots, though NC and SO were significantly more suppressive than QE or SE. In addition, almost all biostimulant treatments also resulted in a significant improvement of tomato growth compared to the non-treated control. These preliminary results seem to confirm the literature data and clearly indicate the potential role of biostimulants for a safe nematode management both in organic and integrated crop systems.

Development of stimuli-responsive nano-based pesticides: emerging opportunities for agriculture

Pesticides and fertilizers are widely used to enhance agriculture yields, although the fraction of the pesticides applied in the field that reaches the targets is less than 0.1%. Such indiscriminate use of chemical pesticides is disadvantageous due to the cost implications and increasing human health and environmental concerns. In recent years, the utilization of nanotechnology to create novel formulations has shown great potential for diminishing the indiscriminate use of pesticides and providing environmentally safer alternatives. Smart nano-based pesticides are designed to efficiently delivery sufficient amounts of active ingredients in response to biotic and/or abiotic stressors that act as triggers, employing targeted and controlled release mechanisms. This review discusses the current status of stimuli-responsive release systems with potential to be used in agriculture, highlighting the challenges and drawbacks that need to be overcome in order to accelerate the global commercialization of smart nanopesticides.

Rapid Detection of the Bursaphelenchus Xylophilus by Denaturation Bubble-mediated Strand Exchange Amplification

Bursaphelenchus xylophilus (B. xylophilus) is one of the most important causal agents of infectious diseases in forest pathology. Obviously, the rapid detection of B. xylophilus is an urgent need for its prevention and cure. We have developed a detection method of B. xylophilus by strand exchange amplification (SEA). This method could detect 10⁵ copies of genomic DNA of B. xylophilus, and it was sufficiently sensitive to detect a single nematode as short as 40 min. Moreover, because the amplification result could be visualized by the naked eyes, the only equipment required throughout the process was a simple isothermal block. Therefore, our method would be a potential for developing on-site detection of B. xylophilus to prevent and control its spread.