Single and competitive adsorption studies of two cationic dyes from aqueous mediums onto cellulose-based modified citrus peels/calcium alginate composite

Development and detailed investigation of metal nanoparticles decorated carbon black/sodium alginate composite beads for catalytic reduction of environmental toxicants and hydrogen production

The discharge of environmental pollutants requires intellectual and rapid solutions to convert them into safer products. Simultaneously, the high energy demands underscore the imperative importance of generating sufficient green energy to fulfill human needs. This study focused on metal nanoparticles (MNPs) decoration on polymeric beads (BDs), employing orange peel derived carbon black (OrP) and sodium alginate polymer (Alg). The resulting Alg-OrP-BDs serve as a versatile platform for the adsorption of different metal ions and their treatment with a potent reducing agent (NaBH4) yielding modified BDs catalysts: Ag0@Alg-OrP-BDs, Ni0@Alg-OrP-BDs, Co0@Alg-OrP-BDs, Fe0@Alg-OrP-BDs, and Cu0@Alg-OrP-BDs. These synthesized nanocomposite catalysts were characterized and exhibit remarkable catalytic reduction capabilities against various nitrophenols and dyes. Notably, Cu0@Alg-OrP-BDs emerges as an outstanding catalyst, demonstrating high efficiency in the (>98 %) reduction of 4-nitrophenol and methyl orange with the rates of 1.568 min-1 and 2.185 min-1, respectively. Furthermore, its parametric study was investigated to explore the efficiency of the selected catalyst in detail. Similarly, the Cu0@Alg-OrP-BDs also enhance hydrogen gas production in various conditions, achieving a rate of 1620.37 mL g-1 of catalyst min-1. The purity of the hydrogen was determined using a GC-TCD system. Hence, this study pioneers the development and thorough examination of the Cu0@Alg-OrP-BDs catalyst, showcasing its exceptional activity and recyclability.

A comprehensive review of chitosan-based functional materials: From history to specific applications

Chitosan (CTS), a natural biopolymer derived from chitin, has garnered significant attention owing to its potential chemical, biological, and physical properties, such as biocompatibility, bioactivity, and biosafety. This comprehensive review traces the historical development of CTS-based materials and delves into their specific applications across various fields. The study highlights the evolution of CTS from its initial discovery to its current state, emphasizing key milestones and technological advancements that have expanded its utility. Despite the extensive research, the synthesis and functionalization of CTS to achieve desired properties for targeted applications remain a challenge. This review addresses current problems such as the scalability of production, consistency in quality, and the environmental impact of extraction and modification processes. Additionally, it explores the novel applications of CTS-based materials in biomedicine, agriculture, environmental protection, and food industry, showcasing innovative solutions and future potentials. By providing a detailed analysis of the current state of CTS research and identifying gaps in knowledge, this review offers a valuable resource for researchers and industry professionals. The novelty of this work lies in its holistic approach, combining historical context with a forward-looking perspective on emerging trends and potential breakthroughs in the field of CTS-based functional materials. Therefore, this review will be helpful for readers by summarizing recent advances and discussing prospects in CTS-based functional materials.

Selective adsorption of anionic dyes by a macropore magnetic lignin-chitosan adsorbent

Dyes pollution is well known for their hazardous impacts on human health and the environment. The removal of dyes from wastewater has become an important issue. In this study, magnetic micrometer-sized particles AL-CTS@MNPs were synthesized from alkaline lignin (AL) and chitosan (CTS) by "one-pot method". The adsorbent presented higher selectivity adsorption effect on anionic dyes than amphoteric and cationic dyes, and even no adsorption effect on cationic methylene blue (MB), which showed that the anionic dyes could be better separated from the other two types of dyes. The adsorption isotherms of the dyes were highly consistent with the Langmuir model, and the maximum adsorption capacity was 329.50 mg/g for methyl orange (MO) and 20.00 mg/g for rhodamine B (RhB). AL-CTS@MNPs showed good adsorption of anionic dyes (MO) in the pH range of 3-9. Meanwhile, the adsorbent AL-CTS@MNPs were also characterized, showing rough surface with specific surface areas of 37.38 m2/g, pore diameter of 95.8 nm and porosity of 17.62 %. The particle sizes were ranged from 800 μm to 1300 μm. The electrostatic attraction and π-π* electron donor-acceptor interactions were the main forces between the adsorbent and anionic dyes. While the electrostatic repulsive force between the adsorbent and the cationic dyes resulted in the non-absorption of MB by AL-CTS@MNPs. Subsequently, the adsorbent maintained a removal rate of >95 % after five adsorption-desorption cycles, demonstrating its excellent stability and recoverability. Ultimately, the prepared AL-CTS@MNPs illuminated good prospect on complex components dyes wastewater treatment.

Preparation of Activated Carbon-Reinforced Composite Beads Based on MnO2/MCM-41@Fe3O4 and Calcium Alginate for Efficient Removal of Tetracycline in Aqueous Solutions

Tetracycline (TC) is a common antibiotic; when untreated TC enters the environment, it will cause a negative impact on the human body through the food chain. In the present study, MnO2/MCM-41@Fe3O4 (FeMnMCM) prepared using a hydrothermal and redox method and Camellia oleifera shell-activated carbon (COFAC) prepared through alkali activation were encapsulated using alginate (ALG) and calcium chloride as a cross-linking matrix to give the composite beads COFAC-FeMnMCM-ALG. The resultant COFAC-FeMnMCM-ALG composite beads were then carefully characterized, showing a high immobilization of MnO2/MCM-41@Fe3O4, with porous COFAC as an effective bioadsorbent for enriching the pollutants in the treated samples. These bead catalysts were subsequently applied to the oxidative degradation of TC in a Fenton oxidation system. Several parameters affecting the degradation were investigated, including the H2O2 concentration, catalyst dosage, initial TC concentration, and temperature. A very high catalytic activity towards the degradation of TC was demonstrated. The electron paramagnetic resonance (EPR) and quenching results showed that ·OH and ·O2- were generated in the system, with ·OH as the main radical species. In addition, the COFAC-FeMnMCM-ALG catalyst exhibited excellent recyclability/reusability. We conclude that the as-prepared COFAC-FeMnMCM-ALG composite beads, which integrate MnO2 and Fe3O4 with bioadsorbents, provide a new idea for the design of catalysts for advanced oxidation processes (AOPs) and have great potential in the Fenton oxidation system to degrade toxic pollutants.

Production of eco-friendly adsorbent of kaolin clay and cellulose extracted from peanut shells for removal of methylene blue and congo red removal dyes

This present work targets the production of an eco-friendly adsorbent (hereinafter KA/CEL) from kaolin clay functionalized with cellulose extract obtained from peanut shells. The adsorbents were used for decolorization of two different types of organic dyes (cationic: methylene blue, MB; anionic: Congo red, CR) from an aqueous environment. Several analytical methods, including Brunauer-Emmett-Teller (surface properties), Fourier Transforms infrared (functionality), scanning electron microscope, Energy dispersive X-Ray (morphology), and pHpzc test (surface charge), were used to attain the physicochemical characteristics of KA/CEL. The Box-Behnken Design (BBD) was applied to determine the crucial factors affecting adsorption performance. These included cellulose loading at 25 %, an adsorbent dose of 0.06 g, solution pH set at 10 for MB and 7 for CR, a temperature of 45 °C, and contact times of 12.5 min for MB and 20 min for CR dye. The adsorption data exhibited better agreement with the pseudo-second-order kinetic and Freundlich models. The Langmuir model estimated the monolayer capacity to be 291.5 mg/g for MB and 130.7 mg/g for CR at a temperature of 45 °C. This study's pivotal finding underscores the promising potential of KA/CEL as an effective adsorbent for treating wastewater contaminated with organic dyes.

Selective adsorption of single and binary dyestuffs by citrus peel: Characterization, and adsorption performance

The powdered citrus peel, which has been replaced with sodium hydroxide, was used in this study to test how well methylene blue and reactive black 5 dyestuff absorbed one or both. To find out about the texture and surface chemistry of modified citrus peel, Fourier transform infrared spectroscopy and scanning electron microscope analyses were carried out. Fourier transform infrared spectroscopy data revealed the presence of amphoteric radicals on the modified citrus peel surface, indicating the effective adsorption of methylene blue and reactive black 5. Many parameters affecting the batch adsorption process, such as modified citrus peel dose (0.1-0.5 g), pH (2-10), time (20-80 min), stirring speed (60-180 rpm), and temperature (20-45 °C), were studied. It is seen that the physical effect is at the forefront, homogeneous monolayer adsorption occurs, and the process fits the Langmuir and pseudo first order models for dyestuffs. Thermodynamic modeling showed that the adsorption of methylene blue and reactive black 5 was spontaneous and endothermic. At pH 2, an adsorption capacity of 0.67 mg/g and a removal efficiency of 66.86% were achieved for reactive black 5. For methylene blue at pH 6, the adsorption capacity was 4.34 mg/g, and the decolorization rate was 87%. The decreases in the removal rates of dyestuffs in the binary system indicate that they are affected by their simultaneous presence in the solution. The results proved that modified citrus peel can be useful for dyestuff removal in single or binary systems, although the removal capacity of modified citrus peel is highly dependent on methylene blue and reactive black 5.

Recent advances in cellulose-based sustainable materials for wastewater treatment: An overview

Water pollution presents a significant challenge, impacting ecosystems and human health. The necessity for solutions to address water pollution arises from the critical need to preserve and protect the quality of water resources. Effective solutions are crucial to safeguarding ecosystems, human health, and ensuring sustainable access to clean water for current and future generations. Generally, cellulose and its derivatives are considered potential substrates for wastewater treatment. The various cellulose processing methods including acid, alkali, organic & inorganic components treatment, chemical treatment and spinning methods are highlighted. Additionally, we reviewed effective use of the cellulose derivatives (CD), including cellulose nanocrystals (CNCs), cellulose nano-fibrils (CNFs), CNPs, and bacterial nano-cellulose (BNC) on waste water (WW) treatment. The various cellulose processing methods, including spinning, mechanical, chemical, and biological approaches are also highlighted. Additionally, cellulose-based materials, including adsorbents, membranes and hydrogels are critically discussed. The review also highlighted the mechanism of adsorption, kinetics, thermodynamics, and sorption isotherm studies of adsorbents. The review concluded that the cellulose-derived materials are effective substrates for removing heavy metals, dyes, pathogenic microorganisms, and other pollutants from WW. Similarly, cellulose based materials are used for flocculants and water filtration membranes. Cellulose composites are widely used in the separation of oil and water emulsions as well as in removing dyes from wastewater. Cellulose's natural hydrophilicity makes it easier for it to interact with water molecules, making it appropriate for use in water treatment processes. Furthermore, the materials derived from cellulose have wider application in WW treatment due to their inexhaustible sources, low energy consumption, cost-effectiveness, sustainability, and renewable nature.

Efficient removal of Cu2+ and methylene blue pollutants from an aqueous solution by applying a new hybrid adsorbent based on alginate-chitosan and HAP derived from Moroccan rock phosphate

Alginate-chitosan/hydroxyapatite (Alg-Cs/HAP) beads were prepared as adsorbent to remove methylene blue (MB) and copper ions from an aqueous solution using a batch system. FTIR, TGA, point of zero charge (pHpzc), SEM, XRD, and BET analysis were used to characterize the elaborated material. The effect of several parameters such as initial pH value, adsorbent dose, temperature, contact time, and initial pollutant concentration were also investigated. The obtained results showed that Alg-Cs/HAP exhibit excellent adsorption properties for Cu (II) and MB removal, with high adsorption capacities of copper ions (208.34 mg/g) and methylene blue (454.54 mg/g). The kinetic of the adsorption process is correlated with the pseudo-first-order for methylene blue and the pseudo-second-order for copper ions. The equilibrium data for MB dye fitted the Freundlich isotherm model, thus implying that the adsorption process consists of multilayer adsorption as well as interactions between the adsorbate and the adsorbent. The equilibrium data for copper ions corresponds closely with the Langmuir model which suggests that the adsorbed molecules occur over a monolayer. Various thermodynamic parameters such as the standard Gibbs energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) were calculated. All results indicated that Alg-Cs/HAP material has a good potential for the treatment of wastewater.

Alginate-based porous polyHIPE for removal of single and multi-dye mixtures: Competitive isotherm and molecular docking studies

A novel hydrophilic porous alginate-based polyHIPE (AGA) was synthesized via an oil-in-water emulsion templating approach. AGA was used as an adsorbent for removing methylene blue (MB) dye in single- and multi-dye systems. BET, SEM, FTIR, XRD, and TEM were used to characterize AGA to elucidate its morphology, composition and physicochemical properties. According to the results, 1.25 g/L AGA adsorbed 99 % of 10 mg/L MB in 3 h in a single-dye system. The removal efficiency decreased to 97.2 % in the presence of 10 mg/L Cu2+ ions and 40.2 % when the solution salinity increased to 70 %. In a single-dye system, the experimental data do not match well with the Freundlich isotherm, pseudo-first order, and the Elovich kinetic model, however, in a multi-dye system, it fit well with both extended Langmuir and the Sheindorf-Rebhun-Sheintuch. Notably, AGA removed 66.87 mg/g in a dye solution containing only MB, whereas 50.14-60.01 mg/g adsorption of MB was accomplished in a multiple-dye system. According to the molecular docking analysis, the dye removal process involved chemical bonds between the functional groups of AGA and the dye molecules, hydrogen bonds, hydrophobic and electrostatic interactions. The overall binding score of MB decreased from -26.9 kcal/mol in a single-dye system to -18.3 kcal/mol in a ternary system.

Thermoplastic starch (TPS)-based composite films for wastewater treatment: synthesis and fundamental characterization

Modification of starch is a potential basic research aiming to improve its water barrier properties. The general purpose of this study is to manufacture cross-linked iodinated starch citrate (ISC) with a degree of substitution (DS) ≈ 0.1 by modifying native corn starch with citric acid in the presence of iodine as an oxidizing agent. Thermoplastic starch (TPS) was generated with urea as a plasticizer and blended with various concentrations of ISC of (2, 4, 6%) (wt/wt) to obtain (UTPS/ISC₂, UTPS/ISC₄, and UTPS/ISC₆). Nanocomposite film was formed from UTPS/ISC₂ in presence of stabilized iodinated cellulose nanocrystals UTPS/ISC₂/SICNCs via gelatinization at a temperature of 80ºC. Water solubility and water vapor release were studied amongst the water barrier features. The fabricated starch-based composite films were evaluated utilizing Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electronic Microscope analysis (SEM), surface area, and tensile measurements. The adsorption of crystal violet (CV) dye onto produced samples was examined in an aqueous solution. The findings revealed that the UTPS/ISC₂/ISCNCs has 83% crystal violet elimination effectiveness. Moreover, the adsorption isotherms were assessed and figured out to vary in the order of Langmuir > Temkin > Freundlich > Dubinin-Radushkevich.

Hungarian and Indonesian rice husk as bioadsorbents for binary biosorption of cationic dyes from aqueous solutions: A factorial design analysis

The wastewater of the dye industry can be characterized by a complex chemical composition and consists of numerous dyes. Bioadsorbents are increasingly applied for the biosorption of dyes because they are inexpensive and environmentally friendly. Rice husk (RH) is a potential agricultural waste that can be converted into a bioadsorbents for the biosorption of cationic dyes. Herein, the removal of methylene blue (MB) and basic red 9 (BR9) dyes by Hungarian rice husk (HRH) and Indonesian rice husk (IRH) using binary biosorption was investigated. Adsorbents were characterized by zeta potential, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Batch biosorption evaluated the influence of different variables, including pH, adsorbent dose, contact time, and initial concentrations. Several factors that influence the biosorption of MB and BR9 onto rice husk were assessed using main effect, Pareto charts, normal probability plots, and interaction effect in a factorial design. The optimum contact time was 60 min. Isotherm and kinetic models of MB and BR9 in binary biosorption fitted to the Brunauer-Emmett-Teller multilayer and the Elovich equation based on correlation coefficients and nonlinear chi-square. Results showed that the biosorption capacity of HRH was 10.4 mg/g for MB and 10 mg/g for BR9; values for IRH were 9.3 mg/g and 9.6 mg/g, respectively. Therefore, HRH and IRH were found to be effective adsorbents for removing MB and BR9 via binary biosorption.

New insights on manganese dioxide nanoparticles loaded on cellulose-based biochar of cassava peel for the adsorption of three cationic dyes from wastewater

Herein, a cost-effective nanomaterial with excellent adsorption capacity, simply prepared, using manganese dioxide (MnO₂) nanoparticles (NP) loaded on cellulose-based biochar of an agricultural waste, which is cassava peel carbon (CPC) and denoted as MnO₂-NP-CPC. MnO₂-NP-CPC is an environmental-friendly, and efficient adsorbent analyzed using different technics such as x-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and energy dispersive x-ray spectroscopy (EDX). MnO₂-NP-CPC was used to remove three different toxic dyes; methylene blue (MB), malachite green (MG), and rhodamine b (RB) from a single (MB), (MG), (RB), binary (MB + MG), (MG + RB), (MB + RB) and ternary (MB + MG + RB) wastewater systems, the impact of pH, adsorbent dose (2-8), initial dye concentrations (10-30 mg/L), temperature (15-35 °C) were fully studied. Furthermore, all the sorption experiments were done including adsorption isotherms, kinetics, and thermodynamics to explore all the mechanisms involved in the sorption of the three ionic dyes in single, binary, and ternary systems. The equilibrium experiments data fitted well the monolayer Langmuir isotherm for the single dye system with correlation coefficients close to 1 (0.98 for MB, 0.99 for MG, and 0.86 for RB), while the extended Langmuir and extended Freundlich isotherms were investigated to study the interaction of the three dyes in their binary systems, the obtained results indicate clearly that the sorption fellows the extended Langmuir model. Besides, the kinetic study showed the applicability of the pseudo-second model for the three dyes. Finally, the thermodynamic adsorption was controlled by physisorption, endothermic, and spontaneous in nature.

Fabrication and evaluation of herbal beads to slow cell ageing

Several therapies and cosmetics are available commercially to prevent or delay cell ageing, which manifests as premature cell death and skin dullness. Use of herbal products such as Aloe vera, curcumin, vitamin C-enriched natural antioxidant, and anti-inflammatory biomolecules are potential ways to prevent or delay ageing. Eggshell membrane (ESM) is also a rich source of collagen; glycosaminoglycans (GAGs) also play an essential role in healing and preventing ageing. It is important to use an extended therapeutic process to prolong the effectiveness of these products, despite the fact that they all have significant anti-ageing properties and the ability to regenerate healthy cells. Encapsulated herbal components are therefore designed to overcome the challenge of ensuring continued treatment over time to prolong the effects of a bioactive component after in situ administration. To study their synergistic effects on a cellular level, alginate, Aloe vera, and orange peel extract were encapsulated in bio-polymeric foaming beads and modified with eggshell membrane protein (ESMP) at various concentrations (1 gm, 2 gm, and 5 gm): (A-Av-OP, A-Av-OP-ESMP1, ESMP2, and ESMP3). Analysis of the structural and functional properties of foaming beads showed interconnected 3D porous structure, a surface-functionalized group for entrapment of ESMP, and a significant reduction in pore size (51-35 m) and porosity (80%-60%). By performing DPPH assays, HRBC stabilization assays, and antibacterial tests, the beads were assessed as a natural anti-ageing product with sustained release of molecules effective against inflammatory response, oxidative stress, and microbial contamination. MTT assays were conducted using in vitro cell cultures to demonstrate cytocompatibility (in mouse 3T3 fibroblast cells) and cytotoxicity (in human carcinoma HeLa cells). Our study demonstrates that bio-polymeric ESMP beads up to 2 g (A-Av-OP-ESMP2) are practical and feasible natural remedies for suspending defective cell pathways, preventing cell ageing, and promoting healthy cell growth, resulting in a viable and practical natural remedy or therapeutic system.

Cellulose, clay and sodium alginate composites for the removal of methylene blue dye: Experimental and DFT studies

Cellulose/clay/sodium alginate composites were prepared and employed for the removal of methylene blue (MB) dye. Cellulose was extracted from a paper mill waste and used for composite preparation with sodium alginate (Na-Alg) and clay. MB dye removal was analyzed at different operating conditions (pH, initial concentration, temperature, composite dose). This dye was adsorbed up to 90% for an equilibrium time of 60 min at optimum level of adsorbent dose (0.05 g), temperature (30 °C) and pH (i.e., 7 and 11 for cellulose-Na-Alg and cellulose-Na-Alg-clay, respectively). Kinetics and isotherms of MB adsorption were quantified and modeled. Results showed that MB dye adsorption data followed the pseudo-first order kinetics and a statistical physics model was used to analyze the adsorption mechanism. Thermodynamic calculation revealed that the MB dye adsorption on these composites was an exothermic, spontaneous and feasible process. The composites were regenerated with HCl thus contributing to their reutilization in subsequent adsorption cycles. The DFT (density functional theory) calculations were executed to explain the interactions responsible for the adsorption of MB dye on the composites. Results revealed that the Na-Alg-cellulose composites were effective for the MB dye removal. Therefore, these composites can be considered as low-cost alternative adsorbents for the pollution remediation caused by dyes in industrial effluents and wastewater.

Biochar based photocatalyst for degradation of organic aqueous waste: A review

The advancement in the treatment technology for wastewater containing recalcitrant pollutants to lower the overall cost and time of the treatment processes is the prime demand. Biochar (BC) based photocatalyst have proved their potential application in the photo-degradation of a wide range of organic pollutants. The structural and chemical properties of the BC enhance the efficacy of photocatalyst, improving its optical properties with increased stability. This review gives an overview of the progress that occurred during the last five years in BC-based photocatalyst for degradation of recalcitrant organic waste in the aqueous system, emphasizing the role of BC in the photocatalytic performance with a brief discussion regarding the various sources of BC and different strategies used to modify the BC. Further, the critical challenges are discussed, which would be confronted during the scaling up and real-time application in wastewater treatment.

Adsorptive removal of organic pollutant methylene blue using polysaccharide-based composite hydrogels

Methylene blue (MB) is categorized as an organic dye (OD) released as effluents after various industrial activities and is one of the most abundant pollutants in the aquatic environment. Significantly, because of its potential toxicity, removing MB from wastewater has been a matter of necessity in recent times. Numerous analytical techniques have been applied, among which polysaccharide-based composite hydrogels appear as the most favorable for MB removal because of their large surface area, excellent mechanical properties, swelling capability, and large-scale production. In this review, the first section gives adequate information about the ODs' adverse effects on the environment and the contribution of polysaccharide-based hydrogels for OD removal, especially MB. Next, various mechanisms such as electrostatic interactions, π-π interactions, hydrogen bonding, hydrophobic interaction, van der Waals force, and coordination interaction involved in the adsorption technique are investigated. The third section extensively describes the MB removal by incorporation of various materials such as monomers, metal oxides, magnetic nanoparticles, and clay into the polysaccharide matrix to produce composite hydrogels. Finally, the current limitations and future perspectives of the polysaccharide-based composite hydrogel techniques are addressed. Overall, this review acknowledged the vital role of polysaccharide-based composite hydrogels for MB adsorption by surveying 110 research articles published in the past five years (2015-2021).

Utilization of fruit and vegetable waste to produce value-added products: Conventional utilization and emerging opportunities-A review

Fruit and vegetables are one of the most consumed commodities globally, accounting for more than 42% of total food wastage. These vegetal foods can be consumed raw, processed, or taken as an addition to other food items. The continuous rise in population, in addition to technological advancements, has led to an imbalance in demand supply, resulting in increased food wastage globally. Although source reduction and recycling have shown promising results, more evaluations concerning economics and environmental impacts need to be given importance. The need of the hour lies in finding a possible method towards effective utilization for fruit and vegetable waste to generate value-added products which are more eco-friendly, cheaper, and sustainable. Thus, this article attempts to focus on the conventional and emerging opportunities of fruit and vegetable waste to generate value-added products. Conventional utilization, namely briquetting, waste to energy conversion, enzymatic degradation, and adsorption, as well as emerging opportunities in the areas of nutraceuticals, packaging, flavoring agents, and waste induced nanoparticles, have been emphasized. Additionally, recommendations and future perspectives towards better utilization of vegetal waste have been given importance. This review aims to narrow down the path towards evaluating the most techno-economic and efficient waste management technique for fruits and vegetable valorization, which can be promoted in the long term.

Solubilization and separation of o-toluidine and tricyclazole in sodium dodecyl sulfate micelles in micellar enhanced ultrafiltration

The solubilization laws of pollutants in micelles and their separation efficiency are very important in the successfully efficient application of micellar enhanced ultrafiltration (MEUF). The solubilization behavior of o-toluidine (OT) and tricyclazole (TC) into sodium dodecyl sulfate (SDS) micelles in MEUF was studied using nonlinear equation sets for concentration analysis, which resolved the issue on the overlap of absorption spectra of multicomponent compounds restricting the application of conventional ultraviolet (UV) spectroscopic method. The solubilization isotherms for both pollutants could be best explained by the Langmuir-Freudlich model (R²>0.99) followed by the modes of Langmuir and Freudlich, inferring the complexity of solubilization mechanism and solubilization advantage of monolayer over multilayer. The calculated thermodynamic parameters (ΔG⁰, ΔH⁰ and ΔS⁰) indicated that this process was endothermic and spontaneous. The solubilization of OT and TC well followed the pseudo second-order and pseudo first-order kinetics, respectively. The separation and recovery of SDS solubilizing these two pollutants were also investigated through lowering solution temperature to 2 °C followed by centrifugation. The best recovery rate of about 66% for SDS was achieved containing 10 and 5% of each initial amount of OT and TC, respectively, at near-neutral solution pH value. The recovery of SDS could decrease to some extent under alkaline and acidic conditions.

Cross-linked FeCl3-activated seaweed carbon/MCM-41/alginate hydrogel composite for effective biosorption of bisphenol A plasticizer and basic dye from aqueous solution

A FeCl₃-activated seaweed carbon/MCM-41/alginate hydrogel composite (ECAC/MCM-41/ ALG) cross-linked with calcium chloride (2% CaCl₂) was synthesized for the biosorption of bisphenol A (BPA) plasticizer and basic blue (BB) dye. Biosorption uptakes of BPA and BB were performed in a batch mode with varying solution pH from 3 to 11, initial sorbate concentration from 25 to 300 mg/L, reaction time from 0 to 10 h, and biosorption temperature from 30 to 50 °C. The maximum BPA and BB uptake mechanisms were fast, which occurred within contact times of 1 and 2 h with monolayer coverage capacities of 222.32 and 190.11 mg/g at 50 °C, respectively. Cyclic biosorption/desorption behavior was evaluated via an ethanol elution to evaluate the feasibility of the ECAC/MCM-41/ALG for long-term application. Results revealed the biosorption renewability for five cycles up to 80% of the newly synthesized hydrogel composite for the purification of industrial wastewater laden with emerging contaminants.

Effective multi-functional biosorbent derived from corn stalk pith for dyes and oils removal

In this study, malic acid-modified corn stalk pith (MA-CSP) was prepared as an environmentally friendly multi-functional bio-sorbent for adsorbing of dyes and oils. The sorption capacity of the MA-CSP for single and binary dyes is 328.46 mg/g - 566.27 mg/g. In addition, the MA-CSP also had good sorption for lubricating oil, soybean oil, diesel oil, and isopropyl alcohol, which were 37.2 g/g, 44.1 g/g, 33.8 g/g, and 29.3 g/g, respectively. Physical and statistical models were used to analyze the adsorption behavior of methylene blue (MB) and crystal violet (CV). And its sorption behavior for dyes was also affected by the co-existing salts in water. The sorption mechanism of the dye was mainly electrostatic attraction and hydrogen bonding action. The sorption of oil was primarily via the role of van der Waals force and hydrophobic interaction. The MA-CSP, as an eco-friendly, economical and efficient multi-functional sorbent, holds promise for effective dyes and oil removal from contaminated water, and its application in other fields is also highly anticipated.

Application of seed residues from Anadenanthera macrocarpa and Cedrela fissilis as alternative adsorbents for remarkable removal of methylene blue dye in aqueous solutions

Two novel ecological and low-cost adsorbents were prepared from seed residues of the tree species Anadenanthera macrocarpa and Cedrela fissilis for the removal of methylene blue dye in water. The materials were comminuted and characterized by different techniques. The particles of samples have a rough surface with cavities. The optimum dosage and pH for both materials were 1 g L^-1 and pH 8. The pseudo-second-order model was the most suitable for describing the adsorption kinetics for both systems. The Anadenanthera macrocarpa presented a maximum experimental capacity of 228 mg g^-1, while the Cedrela fissilis, a similar capacity of 230 mg g^-1 at 328 K. The Tóth model was proper for describing the equilibrium curves for both systems. The thermodynamic indicators show that the adsorption process is spontaneous and endothermic for both materials. The application of materials for the simulated effluent treatment showed 74 and 78% of color removal using Anadenanthera macrocarpa and Cedrela fissilis samples, respectively. Overall, seed residues of Anadenanthera macrocarpa and Cedrela fissilis could be potentially applied for adsorptive removal of colored contaminants in wastewater.