Barley starch: Structure, properties and in vitro digestibility - A review

Creating a zero amylose barley with high soluble sugar content by genome editing

Amylose biosynthesis is strictly associated with granule-bound starch synthase I (GBSSI) encoded by the Waxy gene. Mutagenesis of single bases in the Waxy gene, which induced by CRISPR/Cas9 genome editing, caused absence of intact GBSSI protein in grain of the edited line. The amylose and amylopectin contents of waxy mutants were zero and 31.73%, while those in the wild type were 33.50% and 39.00%, respectively. The absence of GBSSI protein led to increase in soluble sugar content to 37.30% compared with only 10.0% in the wild type. Sucrose and β-glucan, were 39.16% and 35.40% higher in waxy mutants than in the wild type, respectively. Transcriptome analysis identified differences between the wild type and waxy mutants that could partly explain the reduction in amylose and amylopectin contents and the increase in soluble sugar, sucrose and β-glucan contents. This waxy flour, which showed lower final viscosity and setback, and higher breakdown, could provide more option for food processing.

The Ethiopian snack food ('Kolo'): Existing knowledge and research directions on processing practices, quality and consumption

'Kolo' is an Ethiopian well-roasted and dehulled barely snack food eaten alone or mixed with other roasted grains with a relatively long shelf life. It is an ancient and staple Ethiopian snack food that is being introduced around the globe. Traditionally, Kolo has been prepared by Ethiopian mothers. However, there is a scarcity of documented information about the nutritional profile, consumption status and effect of processing conditions on quality of Kolo. Therefore, the aim of this review is to access the indigenous processing practices, consumption status and the effect of processing conditions in quality of Kolo. The review discussed in detail the raw materials, processing steps, nutritional status, anti-nutritional factors, digestability and functional properties of Kolo from publications from the last thirty years. Due to the high temperature processing condition, the presence of acrylamide is highly likely and this may affect the safety of Kolo. The anti-nutritional factors in Kolo may affect the nutritional quality of Kolo due to the inaccessibility of nutrients. This information could have a significant contribution for future researchers, policy makers, society and producers. In conclusion, there is a need to get more tangible information about the quality and safety of Kolo through well designed scientific research to safeguard the wellbeing of the society.

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Selected Physicochemical, Thermal, and Rheological Properties of Barley Starch Depending on the Type of Soil and Fertilization with Ash from Biomass Combustion

The following study analyzed the impact of fertilizing barley with fly ash from biomass combustion grown on two types of soil, Haplic Luvisol (HL) and Gleyic Chernozem (GC), on the properties of starch. The experiment was conducted in 2019 (A) and 2020 (B), and barley was fertilized with ash doses (D1-D6) differing in mineral content. In the tested barley starch samples, the amylose content, the clarity of the paste, and the content of selected minerals were determined. The thermodynamic characteristics of gelatinization and retrogradation were determined using the DSC method. Pasting characteristics, flow curves, and viscoelastic properties of starch pastes were performed. Starches differed in amylose content and paste clarity. The highest gelatinization and retrogradation enthalpy (ΔHG and ΔHR) values were recorded for samples GCD1A and HLD5B. None of the tested factors significantly affected the pasting temperature (PT), but they had a significant impact on the remaining parameters of the pasting characteristics. The average PT value of barley starches was 90.9 °C. However, GCD2A starch had the highest maximum viscosity and the highest rheological stability during heating. GCD2A paste was characterized by the highest apparent viscosity. It was shown that all pastes showed non-Newtonian flow and shear-thinning and had a predominance of elastic features over viscous ones. The resulting gels had the characteristics of weak gels. Ash from burning wood biomass is an innovative alternative to mineral fertilizers. It was shown that the use of such soil fertilization influenced the properties of barley starch.

The Impact of Fermented Scald on Rye and Hull-Less Barley Dough and Bread Structure Formation

In wholemeal bread production, scalding and fermentation contribute to the improvement of the structural characteristics of the dough and bread. The influence of fermented scald on rye and barley dough and bread structure formation was specified in this study. The microstructural analysis performed using a scanning electron microscope revealed the separation of phases during the fermentation of scalds. According to the storage G' and loss G″ moduli, both scalds exhibited elastic character over viscous. The fermentation of barley scald increased both moduli and complex viscosity, while no substantial changes were observed in the fermented rye scald. The addition of fermented scald containing partially hydrolyzed starch and a fraction of water-soluble compounds contributed positively to the formation of a well-organized structure of dough fermented for 4 h. Fermentation substantially reduced the dough's complex viscosity and moduli values, confirming the partial structure alteration leading to the viscous portion increase. The dough with fermented scald showed a significantly lower loss factor than the dough without fermented scald, indicating enhanced mechanical process ability. The most substantial weakening of the structure was observed for dough without scald. The addition of rye scald to the rye dough promoted the formation of fewer pores with relatively smaller specific volumes.

Characteristics of Highland Barley-Wheat Composite Flour and Its Effect on the Properties of Coating Batter and Deep-Fried Meat

Highland barley flour-based coating batter has rarely been reported, although highland barley flour is promising due to its high β-glucan and amylose content. In this study, highland barley flour was used to substitute 40% to 80% of wheat flour to form a highland barely-wheat composite flour used in the coating batter. The characteristics of the highland barley-wheat composite flour and its effect on the properties of coating batter and deep-fried meat were analyzed. Results showed that the composite flour significantly improved water holding capacity, oil absorbing capacity, and water solubility index. In contrast, no significant change was observed in the water absorption index or swelling power. The incorporation of highland barley flour significantly changed the pasting properties of the composite flour. Compared with the wheat flour, the viscosity and the pickup of the coating batter made with composite flour increased from 4905 Pa·s and 0.53% to more than 12,252 Pa·s and 0.63%, respectively, and its water mobility decreased. These changes were closely related to the substitution rate of highland barley flour. The composite flour significantly increased the moisture content from 27.73% to more than 33.03% and decreased the oil content of the crust from 19.15% to lower than 16.44%, respectively. It decreased L* and increased a* of the crust and decreased the hardness, adhesiveness, and springiness of the deep-fried meat. A spongy inner structure with a flatter surface was formed in all composite flour-based crusts, and the substitution rate influenced the flatness of the crust. Thus, highland barley flour could be used for batter preparation with partial substitution, enhancing the quality of deep-fried meat and acting as an oil barrier-forming ingredient for fried batter foods.

Starch granules and their size distribution in wheat: Biosynthesis, physicochemical properties and their effect on flour-based food systems

Starch is a vital component of wheat grain and flour, characterized by two distinct granule types: A-type starch (AS) with granules larger than 10 µm in diameter, and B-type starch (BS) with granules measuring no more than 10 µm in diameter. This review comprehensively evaluates the isolation, purification, and biosynthesis processes of these types of granules. In addition, a comparative analysis of the structure and properties of AS and BS is presented, encompassing chemical composition, molecular, crystalline and morphological structures, gelatinization, pasting and digestive properties. The variation in size distribution of granules leads to differences in physicochemical properties of starch, influencing the formation of polymeric proteins, secondary and micro-structures of gluten, chemical and physical interactions between gluten and starch, and water absorption and water status in dough system. Thus, starch size distribution affects the quality of dough and final products. In this review, we summarize the up-to-date knowledge of AS and BS, and propose the possible strategies to enhance wheat yield and quality through coordinated breeding efforts. This review serves as a valuable reference for future advancements in wheat breeding.

Development of nanocellulose fiber reinforced starch biopolymer composites: a review

In the last few years, there are rising numbers for environmental waste due to factors such as plastic based food packaging that really need to get enough attention in order to prevent the issue from becoming worse and bringing disaster to society. Thus, the uses of plastic composite materials need to be reduced and need to be replaced with materials that are natural and have low degradation to preserve nature. Based on the statistics for the global, the production of plastic has been roughly calculated for passing 400 million metric tons every year and has a high probability of approaching the value of 500 million metric tons at the year of 2025 and this issue needs to be counteracted as soon as possible. Due to that, the increasing number for recent development of natural biopolymer, as an example starch, has been investigated as the substitution for the non-biodegradable biopolymer. Besides, among all biodegradable polymers, starch has been considered as promising substitution polymer due to its renewability, easy availability, and biodegradability. Apart from that, by the reinforcement from the nanocellulose, starch fiber has an increasing in terms of mechanical, barrier and thermal properties. In this review paper, we will be discussing the up-to-date development of nanocellulose fiber reinforced starch biopolymer composites throughout this century.

Ball-milling: A sustainable and green approach for starch modification

Ball-milling is a low-cost and green technology that offers mechanical actions (shear, friction, collision, and impact) to modify and reduce starch to nanoscale size. It is one of the physical modification techniques used to reduce the relative crystallinity and improve the digestibility of starch to their better utility. Ball-milling alters surface morphology, improving the overall surface area and texture of starch granules. This approach also can improve functional properties, including swelling, solubility, and water solubility, with increased energy supplied. Further, the increased surface area of starch particles and subsequent increase in active sites enhance chemical reactions and alteration in structural transformations and physical and chemical properties. This review is about current information on the impact of ball-milling on the compositions, fine structures, morphological, thermal, and rheological characteristics of starch granules. Furthermore, ball-milling is an efficient approach for the development of high-quality starches for applications in the food and non-food industries. There is also an attempt to compare ball-milled starches from various botanical sources.

Adding glucose delays the conversion of ethanol and acetic acid to caproic acid in Lacrimispora celerecrescens JSJ-1

Caproic acid is an important fatty acid with diverse applications. In this study, the biomass growth and metabolites of Lacrimispora celerecrescens JSJ-1 were investigated under different carbon sources (ethanol, starch, sucrose, and glucose), with a focus on the effect of the coexistence of glucose and ethanol on the synthesis of caproic acid. The results showed that starch, glucose, and sucrose all contributed to the biomass of L. celerecrescens JSJ-1. Under the three carbon sources, L. celerecrescens JSJ-1 produced acetic acid, butyric acid, lactic acid, ethanol, and butanol, but caproic acid was not produced. Ethanol was the optimal substrate for the production of caproic acid. When glucose and ethanol coexisted, the generation time of caproic acid was delayed compared with that in ethanol sodium acetate medium (ES medium). This was because glucose was preferentially consumed over ethanol. Lactic acid was generated as a result of glucose consumption, which led to a significant decrease in pH from 6.45 to 4.68. The low pH (< 5) inhibited the synthesis of caproic acid. Then, the strain's usage of lactic acid and the reaction between CaCO₃ and lactic acid caused the pH to increase. L. celerecrescens JSJ-1 did not start producing caproic acid using ethanol and acetic acid until the pH increased to 5.8. This research enriches the knowledge regarding the metabolism of L. celerecrescens JSJ-1 and provides guidelines for the industrial production of caproic acid by using L. celerecrescences JSJ-1. KEY POINTS: • Ethanol is the optimal substrate for the synthesis of caproic acid by Lacrimispora celerecrescens JSJ-1. • Lacrimispora celerecrescens JSJ-1 produced lactic acid rapidly when it used glucose, causing a sharp drop in pH. • pH is a crucial factor affecting the synthesis of caproic acid from ethanol by Lacrimispora celerecrescens JSJ-1.

Binary Hydrogels: Induction Methods and Recent Application Progress as Food Matrices for Bioactive Compounds Delivery-A Bibliometric Review

Food hydrogels are biopolymeric materials made from food-grade biopolymers with gelling properties (proteins and polysaccharides) and a 3D network capable of incorporating large amounts of water. They have sparked considerable interest because of their potential and broad application range in the biomedical and pharmaceutical sectors. However, hydrogel research in the field of food science is still limited. This knowledge gap provides numerous opportunities for implementing their unique properties, such as high water-holding capacity, moderated texture, compatibility with other substances, cell biocompatibility, biodegradability, and high resemblance to living tissues, for the development of novel, functional food matrices. For that reason, this article includes a bibliometric analysis characterizing research trends in food protein-polysaccharide hydrogels (over the last ten years). Additionally, it characterizes the most recent developments in hydrogel induction methods and the most recent application progress of hydrogels as food matrices as carriers for the targeted delivery of bioactive compounds. Finally, this article provides a future perspective on the need to evaluate the feasibility of using plant-based proteins and polysaccharides to develop food matrices that protect nutrients, including bioactive substances, throughout processing, storage, and digestion until they reach the specific targeted area of the digestive system.

Highland Barley Starch: Structures, Properties, and Applications

Highland barley (HB) is a nutritious crop with excellent health benefits, and shows promise as an economically important crop with diverse applications. Starch is the main component of HB and has great application potential owing to its unique structural and functional properties. This review details the latest status of research on the isolation, chemical composition, structure, properties, and applications of highland barley starch (HBS). Suggestions regarding how to better comprehend and utilize starches are proposed. The amylopectin content of HBS ranged from 74% to 78%, and can reach 100% in some varieties. Milling and air classification of barley, followed by wet extraction, can yield high-purity HBS. The surface of HBS granules is smooth, and most are oval and disc-shaped. Normal, waxy, and high-amylose HBS have an A-type crystalline. Due to its superb freeze-thaw stability, outstanding stability, and high solubility, HBS is widely used in the food and non-food industries. The digestibility of starch in different HB whole grain products varies widely. Therefore, the suitable HB variety can be selected to achieve the desired glycemic index. Further physicochemical modifications can be applied to expand the variability in starch structures and properties. The findings provide a thorough reference for future research on the utilization of HBS.

A Novel Starch from Talisia floresii Standl Seeds: Characterization of Its Physicochemical, Structural and Thermal Properties

Colok seed (Talisia floresii Standl) represents 80% of the total fruit weight and is obtained from trees that grow mainly in Yucatan Peninsula. The aim of this work was the physicochemical characterization from colok starch seeds as an alternative to conventional sources and to identify its characteristics for potential applications in different industrial sectors. Starch yield was 42.1% with low levels of lipids, ashes and fibers. The amylose content was 33.6 ± 1.15%. The gelatinization temperature was 85 ± 0.25 °C. Color analysis resulted in a starch with an intermediate luminosity, reflecting a dark color. Finally, in morphology, starch granule exhibited an average size of 18.7 μm, spherical, uniform and without fractures. Overall results demonstrated that isolated colok starch can be used in food products that require high processing temperatures, such as sauces, cookies, noodles, bread and food packages.

Effects of Different Extraction Methods on the Gelatinization and Retrogradation Properties of Highland Barley Starch

The purpose of this study was to compare the gelatinization and retrogradation properties of highland barley starch (HBS) using different extraction methods. We obtained HBS by three methods, including alkali extraction (A-HBS), ultrasound extraction (U-HBS) and enzyme extraction (E-HBS). An investigation was carried out using a rapid viscosity analyzer (RVA), texture profile analysis (TPA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectrometry (FTIR). It is shown that the different extraction methods did not change the crystalline type of HBS. E-HBS had the lowest damaged starch content and highest relative crystallinity value (p < 0.05). Meanwhile, A-HBS had the highest peak viscosity, indicating the best water absorption (p < 0.05). Moreover, E-HBS had not only higher G′ and G″ values, but also the highest gel hardness value, reflecting its strong gel structure (p < 0.05). These results confirmed that E-HBS provided better pasting stability and rheological properties, while U-HBS provides benefits of reducing starch retrogradation.

Smart Material Choice: The Importance of Circular Design Strategy Applications for Bio-Based Food Packaging Preproduction and End-of-Life Life Cycle Stages

This article provides a systematic literature review on the integrated approach of bio-based plastic food packaging in a circular economy. It focuses on the following key areas: (1) the role of bio-based plastic food packaging in a circular product design strategy and material choice in the preproduction life cycle stage; (2) the role of bio-based plastic food packaging in circular resource management systems and the product disposal life cycle stage; and (3) an optimal bio-based plastic food packaging application in regard to prioritising end-of-life treatment. While there are dedicated publications on the role of packaging in a circular economy, circular packaging design, packaging waste management, and bio-origin plastic applications in food packaging, this article aims to provide an integrated review and recommendations on the best bio-based plastic food packaging material selection, applications based on a circular economy, and scenarios on waste/resource management that prioritise end-of-life treatment. Three of the current most popular bio-based plastic materials in the flexible and rigid food packaging categories were selected: starch blends, bio-PE, and PLA for flexible food packaging and PLA, bio-PET, and bio-PE for rigid packaging. This article highlights the fact that a smart material choice in the circular design strategy is a key factor that has a direct impact on the last packaging life cycle stage (disposal), and concludes that bio-based plastic materials are a way to close the food packaging loop, either by re-use or recycling. This article also provides recommendations on the best bio-based plastic food packaging material selection, and applications based on the circular economy and waste management that prioritise end-of-life treatment. The research results indicate a research niche for the application of re-usable biodegradable materials in food packaging. The findings of this research allow product designers and packaging companies to advance the understanding of the most efficient bio-based plastic food packaging integration into the circular economy via decision making of product material choice and end-of-life treatment. Based on the results of this article, scholars can develop new themes for further research.

Effect on the Properties of Edible Starch-Based Films by the Incorporation of Additives: A Review

At present, people more actively pursuing biodegradable-based food packaging to lower the environmental problems of plastic-based packaging. Starch could become a promising alternative to plastic because of its properties (easily available, nontoxic, tasteless, biodegradable, ecofriendly, and edible). This review article is focused mainly on the impact of the properties of starch-based biodegradable films, such as their thickness, morphology, and optical, water-barrier, mechanical, oxygen-barrier, antioxidant, and antimicrobial properties, after the incorporation of additives, and how such films fulfill the demands of the manufacturing of biodegradable and edible food-based film with preferable performance. The incorporation of additives in starch-based films is largely explained by its functioning as a filler, as shown via a reduction in water and oxygen permeability, increased thickness, and better mechanical properties. Additives also showed antimicrobial and antioxidant properties in the films/coatings, which would positively impact the shelf life of coated or wrapped food material.

Starch-based bio-nanocomposites films reinforced with cellulosic nanocrystals extracted from Kudzu (Pueraria montana) vine

In the current study, starch-based active nanocomposite films reinforced with cellulosic nanocrystals (CNCs) of Kudzu were developed as an alternative option to existing biodegradable plastic packaging. Firstly, Kudzu CNCs were prepared by subjecting Kudzu fibers to the processes such as depolymerization followed by bleaching, acid hydrolysis, and mechanical dispersion. Further, nanocomposite films were formulated by blending pearl millet starch (PMS) and glycerol (30%) with different Kudzu CNCs compositions (0-7 wt%) using the solution casting process. The prepared PMS/Kudzu CNCs nanocomposite films were analyzed for their morphological (SEM and TEM), thermal (TGA and DSC), structural (FTIR), mechanical (tensile strength (TS), elongation at break and young modulus), and water barrier properties. The PMS/Kudzu CNCs films possessed improved crystallinity, heat and moisture-barrier properties, TS, and young-modulus after reinforcement. The optimum reinforcer concentration of CNCs was 5%. The Kudzu CNCs reinforced starch film offers a promising candidate for developing biodegradable films.

Proso-millet starch: Properties, functionality, and applications

Previously proso-millet, considered an underutilized cereal, has drawn considerable attention due to health benefits like good nutritional profile, low glycemic index, and gluten-free. The present review discusses starch extractability, structural characteristics, morphology, and physicochemical properties. Starch properties mainly depend on the amylose and amylopectin composition and distribution of brained chains. A very diverse starch structure and morphology were observed among the waxy and non-waxy cultivars. The amylose content ranged from 0.75 to 28.3% in many varieties, but exceptionally Hongmeizi variety showed a 32.3% as per the reported evidence. There are a positive correlation between the amylose content and cooking quality, thermal and pasting properties. The size and shape of smallest to largest starch granules varied between 0.3 and 17 μm and round to polygonal, respectively. The non-waxy starch varieties of proso-millet are widely used in food processing due to high resistance to swelling during heat treatment. Few food applications of proso-millet are bakery products like gluten-free bread, porridge, pasta, ready-to-eat breakfast cereals, infant foods, and distilleries. We can conclude that proso millet is an alternative to existing starch for its quality characteristics and provides insight to many food processing industries.

Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92-76.16 °C, 67.95-81.05 °C, and 73.78-84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G') and loss modulus (G'')) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Nano-cellulose reinforced starch bio composite films- A review on green composites

Plastic-based food packaging is generating a serious environmental problem by accumulating large amounts of plastic in the surroundings. Ecological and health concerns are driving research efforts for developing biodegradable films. There are few alternatives that could reduce the environmental impact; one of them is to substitute petroleum-based plastic with starch-based film. Starch has remarkable properties, including biodegradability, sustainability, abundancy, and capable of being modified or blended with other polymers. However, low mechanical strength and low water resistance restrict its application in food packaging. Nanocellulose isolated from lignocellulosic fibers has attracted tremendous interest in the field of science due to high crystallinity and mechanical strength, unique morphology along with abundancy, renewability, and biodegradability. Therefore, nano cellulose as a reinforcer proved to be a good option for fabricating biocomposites for food packaging. The current review will give a critical snapshot of the potential application of nanocellulose in food packaging and discuss new challenges and opportunities for starch biocomposites enriched with nano cellulose.

Highland barley starch (Qingke): Structures, properties, modifications, and applications

Highland barley (HB) is mainly composed of starch, which may account for up to 65% of the dry weight to the kernel. HB possesses unique physical and chemical properties and has good industrial application potential. It has also been identified as a minor grain crop with excellent nutritional and health functions. Highland barley starch (HBS) features a number of structural and functional properties that render it a useful material for numerous food and non-food applications. This review summarizes the current status of research on the extraction processes, chemical composition, molecular fine structures, granular morphology, physicochemical properties, digestibility, chemical and physical modifications, and potential uses of HBS. The findings provide a comprehensive reference for further research on HBS and its applications in various food and non-food industries.

Pearl millet grain as an emerging source of starch: A review on its structure, physicochemical properties, functionalization, and industrial applications

Pearl millet (Pennisetum glaucum (L.) R.Br.) is a sustainable and underutilized starch source, constituting up to 70 % starch in its grain. Pearl millet could be used as a cheaper source of starch as compared to other cereals for developing functional foods. This review is mainly focused on isolation methods, and chemical composition of the pearl millet starch (PMS). Techno-functional characteristics such as; gelatinization, pasting properties, solubility, swelling power, and digestibility to infer wider application of the PMS critically highlighted in the review. Native starches have limited functionalitiesfor food applications due to the instability in developed pastes and gels. A number of modifications (physical, mechanical and enzymatic) have been developed to increase the functionality and to obtain desired characteristics of PMS thus improving its utilization in food applications. Further, the utilization of native as well as modified PMS is also discussed comprehensively. In addition, a number of recommendations to further improve its functionality and increase its application are also discussed.

Deep Dive Into the Effects of Food Processing on Limiting Starch Digestibility and Lowering the Glycemic Response

During processing of cereal-based food products, starch undergoes dramatic changes. The objective of this work was to evaluate the impact of food processing on the starch digestibility profile of cereal-based foods using advanced imaging techniques, and to determine the effect of preserving starch in its native, slowly digestible form on its in vivo metabolic fate. Four different food products using different processing technologies were evaluated: extruded products, rusks, soft-baked cakes, and rotary-molded biscuits. Imaging techniques (X-ray diffraction, micro-X-ray microtomography, and electronic microscopy) were used to investigate changes in slowly digestible starch (SDS) structure that occurred during these different food processing technologies. For in vivo evaluation, International Standards for glycemic index (GI) methodology were applied on 12 healthy subjects. Rotary molding preserved starch in its intact form and resulted in the highest SDS content (28 g/100 g) and a significantly lower glycemic and insulinemic response, while the three other technologies resulted in SDS contents below 3 g/100 g. These low SDS values were due to greater disruption of the starch structure, which translated to a shift from a crystalline structure to an amorphous one. Modulation of postprandial glycemia, through starch digestibility modulation, is a meaningful target for the prevention of metabolic diseases.