Synthesis and characterization of chitosan and guar gum based ternary blends with polyvinyl alcohol

Preparation and characterization of chitosan/polyvinyl alcohol/Ginkgo biloba leaf extract composite film and its effect on chilled beef preservation

Bioactive composite films containing varying concentrations (0 %, 2 %, 6 %, and 10 %) of the Ginkgo biloba leaf extract (GBLE) were prepared using chitosan (CS) and polyvinyl alcohol (PVA) as substrates and applied to preserve chilled beef. The thickness, density, mechanical properties, barrier properties, antioxidant activity, and thermal stability of the developed composite films significantly increased as the GBLE concentration increased (P < 0.05). Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction confirmed that GBLE was primarily integrated into the film matrix through hydrogen bonding and exhibited good compatibility. Compared with control films, the active composite films significantly inhibited color deterioration and microbial growth in chilled beef during storage, delayed fat and protein oxidation, improved chilled beef quality, and extended shelf life to 12 days. These findings suggest that GBLE/CS/PVA composite films hold great potential as active packaging materials for food preservation.

Study on Fabrication and Properties of Polyvinyl Alcohol/Chitosan Nanofibers Created from Aqueous Solution with Acetic Acid and Ethanol by the Electrospinning Method

The development of nanofibers with incorporated biologically active molecules with a targeted mode of action is a current research trend. Potential materials for the development of such systems include poly(vinyl alcohol) (PVA) and chitosan (CS) nanofibers, which are traditionally fabricated by the electrospinning of aqueous solutions of these polymers with acetic acid. To improve drug integration, ethanol was added to the binary-solvent system. This results in several important data: noticeable shifts in the solvent system's solubility parameter, the interaction of the various component forces, and optical and rheological properties of the PVA-CS solution. The use of ethanol in the electrospun solution also contributes to adjusting the solubility parameters of the solution in the Teas graph, maintaining the "fh - fd" in the optimal region for the fabrication of PVA-CS nanofibers. Increasing the efficiency of PVA-CS nanofiber fabrication by electrospinning is quite difficult due to the requirements of solution parameters, technological parameters, and environmental parameters; however, this efficiency was increased in this work by 2 to 3 times with a more optimal PVA-CS nanofiber morphology. These results demonstrate that aqueous solution containing 4% PVA, 3% CS, 15% ethanol, and 45% acetic acid is optimal for increasing the nanofiber fabrication productivity, improving the morphology and diameter of PVA-CS nanofibers without changing in chemical bonds. The XRD spectrum revealed that the alterations in the crystal lattice and diameter of the PVA-CS nanofibers led to the variation in their thermal and tensile properties.

Analysis and discrimination of adhesive species using ATR-FTIR combined with Raman, and HS-GC-IMS together with multivariate statistical analysis

Identifying the species and origin of adhesives in criminal investigations aids in narrowing inquiry scope and supporting case detection. This study introduces two advanced combined analytical techniques for distinguishing adhesive species, including attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) combined with Raman spectroscopy, and headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) together with multivariate statistical analysis. ATR-FTIR categorized seven adhesives into three groups based on the base materials, with further differentiation achieved via Raman spectra. Analysis of volatile components identified 79 volatile organic compounds (VOCs), with esters being the most concentrated. The fingerprint profile clearly illustrated the characteristic fingerprint sequence and unique marker compounds of each adhesive, effectively enabling their differentiation. Multivariate statistical analysis methods, including principal component analysis (PCA), orthogonal partial least squares-discriminant analysis (OPLS-DA), heatmap, and hierarchical cluster analysis (HCA), were utilized to visually interpret the classification of adhesives. This integrated analytical approach provides a comprehensive analysis of adhesive compositions, facilitating the diversification and precision of adhesive species identification, and broadening the scope for detecting and analyzing trace evidence in forensic science.

Adsorption of haem by magnetic chitosan microspheres: Optimal conditions, adsorption mechanisms and density functional theory analyses

Magnetic chitosan microspheres (Al@CTS@Fe3O4) were prepared for haem separation via chemical cross-linking of chitosan, Fe3O4 and AlCl3·6H2O. The properties of the Al@CTS@Fe3O4 microspheres were investigated through techniques including XRD, TEM, FTIR, BET analysis, SEM, TG, VSM, XPS and pHpzc analysis. The haem adsorption of Al@CTS@Fe3O4 was optimized via a Box-Behnken design (BBD) with three operating factors: Fe3O4 dose (0.5-1.3 g), AlCl3·6H2O concentration (0.25-1.25 mol/L) and glutaraldehyde dose (2-6 mL). The optimal haem adsorption effect was achieved with 1.1 g of Fe3O4, 0.75 mol/L AlCl3·6H2O, and 3 mL of glutaraldehyde. The adsorption kinetics and isotherms demonstrated that haem adsorption by the Al@CTS@Fe3O4 microspheres was best described by the pseudo-second-order model. The maximum adsorption capacity is 33.875 mg/g at pH 6. After six adsorption-desorption cycles, the removal of haem still reached 53.83 %. The surface adsorption mechanism of haem on Al@CTS@Fe3O4 can be attributed to electrostatic, hydrogen bonding, and n-π interactions. Thermodynamic calculations indicated that the adsorption process is spontaneous, with the microspheres preferentially accepting electrons and haem preferentially providing electrons. Consequently, the Al@CTS@Fe3O4 microspheres exhibit considerable potential as adsorbents for haem separation.

Development and characterization of eco-friendly guar gum-agar-beeswax-based active packaging film for cheese preservation

In this work, an attempt has been made to develop a novel natural polysaccharide-based composite packaging biofilm prepared through a solution casting method. The biofilm is prepared from guar gum (GG) and agar-agar (AA) beeswax (BE). The incorporation of 20 % wt./wt.glycerol BE in the blended polymer GG/AA (50:50) (GG/AA/BE20 (50:50)) film shows a reduction in water solubility (66.67 %), water vapour permeability (69.28 %) and oxygen permeability (72.23 %). Moreover, GG/AA/BE20 (50:50) shows an increment in the tensile strength and elongation of a break by 48.32 % and 26.05 %, respectively, compared to pristine GG film. The scanning electron microscopy (SEM) image reveals defects-free smooth surfaces of the film. The Fourier transform-infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the strong hydrogen bonding between GG, AA, and BE. The biodegradable film shows 99 % degradation within 28 days when placed in the soil. The developed film plays a crucial role in extending the shelf life of cheese, effectively maintaining its moisture content, texture, colour, and pH over a span of up to two months from the point of packaging. These results suggest that GG/AA/BE20 (50:50) composite film is a promising packaging film for cheese preservation.

Preparation of curcumin-loaded chitosan/polyvinyl alcohol intelligent active films for food packaging and freshness monitoring

To fulfill the current need for intelligent active food packaging. This study incorporated the curcumin inclusion complexes (CUR-CD) into chitosan/polyvinyl alcohol polymer to develop a new intelligent active film. The structures of films were analyzed by Fourier-transform infrared (FT-IR), scanning electron microscope (SEM), and so on. The CP-Cur150 film displays exceptional mechanical properties, water vapor barrier, and UV blocking capabilities as demonstrated by physical analysis. The CP-Cur150 film exhibited free radical scavenging rates on 2,2-diazo-di-3-ethylbenzothiazolin-6-sulfonic (ABTS) (98 %) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) (87 %). Additionally, it showed inhibitory effects on Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli), reducing live colony counts by approximately 2.7 and 1.3 Log10 CFU/mL, respectively. The films were used to monitor the shrimp's freshness in real time. With the spoilage of shrimp, the film exhibited clear color fluctuations, from light yellow to red. In addition, the evaluation of the impact of films on pork pH, total volatile basic nitrogen, and total bacterial counts demonstrated that the CP-Cur150 film displayed the most significant effectiveness in preserving freshness, thereby extending the shelf life of pork.

Gradient Hierarchically Porous Ionic-Junction Fibers of Wet-Spun Carboxymethyl Cellulose Coagulated with Copper Sulfate

Polyelectrolyte-based ionic-junction fibers newly serve as signal transmission and translation media between electronic devices and biological systems, facilitating ion transport within organic matrices. In this work, we fabricated gel filaments of carboxymethyl cellulose (CMC) chelated with Cu(II) ions through wet-spinning, using a saturated coagulant of CuSO4. Interestingly, the as-spun fibers exhibited dramatic 3D porous frameworks that varied with the temperature and precursor concentration. At 20 °C, the Cu(II) chelation networks favored the formation of well-organized cellular chambers or corrugated channels, displaying dense stacking patterns. However, critical transitions from cellular chambers to corrugated channels occurred at precursor dope concentrations of approximately 2 and 7 wt %, with the porous structure diminishing beyond 8 wt %. We have proposed schematic diagrams to mimic the 3D pore structure, dense porous stacking, and formation mechanism, according to electronic micrographs. Our investigations revealed that the distinct ion-junction channels or chambers are under the control of axial drawing extension as well as the outside-inside penetration of Cu(II) ions into the dope and inside-outside diffusion of water into coagulants. Therefore, controlling the metal chelation-water diffusion process at specific temperatures and concentrations will offer valuable insights for tailoring ionic-junction soft filaments with gradient hierarchically porous structures and shape memory properties.

Synthesis of carboxymethyl chitosan-guar gum-poly(vinylpyrrolidone) ternary blended hydrogels with antibacterial/anticancer efficacy and drug delivery applications

Biopolymers have the utmost significance in biomedical applications and blending synthetic polymers has shown favorable characteristics versus individual counterparts. The utilization of the blends can be restricted through the use of toxic chemical agents such as initiators or crosslinkers. In this regard, a chemical agent-free ionizing irradiation is a beneficial alternative for preparing the hydrogels for biomedical applications. In this study, carboxymethyl chitosan (CM-CS), guar gum (GG), and poly(vinylpyrrolidone) (PVP) based ternary blends (TB) were crosslinked using various doses of ionizing irradiation to fabricate hydrogels. The prepared hydrogels were characterized for physicochemical properties, swelling analysis, biological assays, and drug delivery applications. Swelling analysis in distilled water revealed that the hydrogels exhibit excellent swelling characteristics. An in vitro cytocompatibility assay showed that the hydrogels have greater than 90% cell viability for the human epithelial cell line and a decreasing cell viability trend for the human alveolar adenocarcinoma cell line. In addition, the prepared hydrogels possessed excellent antibacterial characteristics against gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli). Finally, the release studies of anti-inflammatory Quercus acutissima (QA) loaded hydrogels exhibited more than 80% release in phosphate-buffered saline (pH = 7.4). These findings suggest that TB hydrogels can be used as suitable carrier media for different release systems and biomedical applications.

Folic Acid-Decorated Nanocrystals as Highly Loaded Trojan Horses to Target Cancer Cells

The nanocrystal (NC) technology has become one of the most commonly used strategies for the formulation of poorly soluble actives. Given their large specific surface, NCs are mainly used to enhance the oral absorption of poorly soluble actives. Differently from conventional nanoparticles, which require the use of carrier materials and have limited drug loadings, NCs' drug loading approaches 100% since they are formed of the pure drug and surrounded by a thin layer of a stabilizer. In this work, we report the covalent decoration of curcumin NCs with folic acid (FA) using EDC/NHS chemistry and explore the novel systems as highly loaded "Trojan horses" to target cancer cells. The decorated NCs demonstrated a remarkable improvement in curcumin uptake, exhibiting enhanced growth inhibition in cancer cells (HeLa and MCF7) while sparing healthy cells (J774A.1). Cellular uptake studies revealed significantly heightened entry of FA-decorated NCs into cancer cells compared to unmodified NCs while also showing reduced uptake by macrophages, indicating a potential for prolonged circulation in vivo. These findings underline the potential of NC highly loaded nanovectors for drug delivery and, in particular, for cancer therapies, effectively targeting folate receptor-overexpressing cells while evading interception by macrophages, thus preserving their viability and offering a promising avenue for precise and effective treatments.

Pimobendan controlled release guar gum printlets: Tailoring drug doses for personalised veterinary medicines

Treating chronic heart diseases in dogs is challenging due to variations in mass within and between species. Pimobendan (PBD), a veterinary drug only, is prescribed in specific cases of chronic heart disease in dogs and is available on the market in only a few different doses. Furthermore, the therapy itself is challenging due to the large size of the chewable tablets and the requirement for twice-daily administration. The development of customised and on-demand PBD medicines by three-dimensional (3D) printing has been proposed to circumvent these disadvantages. In this study, we designed controlled-release flavoured printlets containing PBD. We evaluated the use of two natural polymers, guar or xanthan gums, as the main component of the printing inks. Guar gum showed the better rheological behavior and printability by semisolid extrusion. The printlets were produced in three different shapes and sizes to allow dose customisation. Guar gum printlets showed a PBD controlled release profile, regardless of their shape or size. Therefore, we have demonstrated a novel approach for controlling PBD drug release and tailoring the dose by employing a natural polymer to produce 3D-printed tablets. This study represents a significant step towards the development of 3D-printed guar gum controlled-release formulations for veterinary applications.

Chitosan/alginate/pectin biopolymer-based Nanoemulsions for improving the shelf life of refrigerated chicken breast

This study investigated the use of nanoemulsions and various polymer coatings to enhance the quality and shelf life of chicken breast. This comprehensive study explored the antibacterial activity of essential oils (EOs) against Escherichia coli and Staphylococcus aureus, as well as the characterization of nanoemulsions (Nes) and nanoemulsion-based coatings. The antimicrobial potential of EOs, such as cinnamon, tea tree, jojoba, thyme, and black cumin seed oil, was evaluated against microorganisms, and thyme oil exhibited the highest inhibitory effect, followed by cinnamon and tea tree oil by disk diffusion analysis. The MIC and MBC values of EOs were found between 0.16-2.5 mg/mL and 0.16-5 mg/mL, respectively, while thyme EO resulted in the lowest values showing its antimicrobial potential. Then, the essential oil nanoemulsions (EONe) and their coatings, formulated with thyme oil, alginate, chitosan, and pectin, were successfully characterized. Optical microscope observations confirmed the uniform distribution of droplets in all (EONe), while particle size analysis demonstrated multimodal droplet size distributions. The EONe-chitosan coating showed the highest efficacy in reducing cooking loss, while the EONe-chitosan, EONe-alginate, and EONe-pectin coatings displayed promising outcomes in preserving color stability. Microbial analysis revealed the significant inhibitory effects of the EONe-chitosan coating against mesophilic bacteria, psychrophilic bacteria, and yeasts, leading to an extended shelf life of chicken breast. These results suggest the potential application of thyme oil and NE-based coatings in various industries for antimicrobial activity and quality preservation.

Anti-bacterial films developed by incorporating shikonin extracted from radix lithospermi and nano-ZnO into chitosan/polyvinyl alcohol for visual monitoring of shrimp freshness

In recent years, the utilization of smart colorimetric packaging films for monitoring food freshness has garnered significant concentration. However, their limited tensile strength, hydrophobicity, antioxidant, and antibacterial properties have been substantial barriers to widespread adoption. In this study, we harnessed the potential of biodegradable materials, specifically chitosan/polyvinyl alcohol, alongside shikonin extracted from Radix Lithospermi and ZnO nanoparticles, to create a novel colorimetric sensing film. This film boasts an impressive tensile strength of 82.36 ± 2.13 MPa, enhanced hydrophobic characteristics (exemplified by a final contact angle of 99.81°), and outstanding antioxidant and antibacterial properties. It is designed for real-time monitoring of shrimp freshness. Additionally, we verified the effectiveness of this sensing film in detecting shrimp freshness across varying temperature conditions, namely 25 °C and 4 °C was validated through the measurement of total volatile basic nitrogen (TVB-N). Visual inspection unequivocally revealed a transition in color from dark red to purple-light blue and finally to dark bluish providing a clear indication of shrimp spoilage, which demonstrated a strong correlation with the TVB-N content in shrimp measured through standard laboratory procedures. The colorimetric sensing film developed in this study holds great promise for creating smart labels with exceptional antioxidant and antibacterial properties, tailored for visual freshness monitoring of shrimp.

Applications of guar gum polysaccharide for pharmaceutical drug delivery: A review

Bio-based materials are rapidly replacing synthetic materials owing to their significant biomedical applications, easy availability, nontoxicity, biodegradability and biocompatibility. Guar gum (GG) is a plant-derived biocompatible and biodegradable polymeric compound found abundantly in nature. It is a non-ionic, hydrophilic carbohydrate and is a cost-effective hydrocolloid polysaccharide considered as a wonderful representative of the new generation of plant gums. Various composites of guar gum with other polymers have been reported in last few decades and they are extensively used in different industries like food, textile, mining, petrochemical, paper and explosives etc. Easy availability, non-toxicity, eco-friendly and biodegradable nature of GG has made it ideal candidate for for drug delivery (DD) applications. GG based hydrogels, films, scaffolds and nanoparticles have been explored widely for their DD applications. These non-toxic DD carriers can be used for targeted drug delivery. This review article directs the current efforts and improvements on GG and GG-based materials to be used in DD.

Banana fibre-chitosan-guar gum composite as an alternative wound healing material

Bio-composites, which can be obtained from the renewable natural resources, are fascinating material for use as sustainable biomaterials with essential properties like biodegradable, bio-compatibility as well cyto-compatibility etc. These properties are useful for bio-medical including wound healing applications. In this study, fibre obtained banana pseudo stem of banana plant, which is otherwise wasted, was used as a material along with chitosan and guar gum to fabricate a banana fibre-biopolymer composite patch. The physiochemical properties of the patches were examined using Fourier Transformed Infra-red spectrophotometer (FT-IR), tensile tester, Scanning Electron Microscope (SEM), contact angle tester, swelling and degradation studies. We further demonstrated that a herbal drug, Nirgundi could be loaded to the patch showed controlled its release at different pHs. The patch had good antibacterial property and supported proliferation of mouse fibroblast cells. The study thus indicates that banana fibre-chitosan-guar gum composite can be developed into an alternative wound healing material.

Thermal and biological properties of novel sodium carboxymethylcellulose-PPFMA nanocomposites containing biosynthesized Ag-ZnO hybrid filler

The aim of this study was to produce new nanocomposites with antimicrobial, antioxidant and anticancer properties that can be used in biomedical research based on carboxymethyl cellulose (NaCMC) biopolymer. First, poly(2-oxo-2-(pentafluorophenoxy)ethyl-2-methylprop-2-enoate) (PPFMA) was synthesized and characterized by FTIR and NMR techniques. It was then blended with NaCMC by in situ/hydrothermal method to produce a semi-synthetic functional material. Changes in the FTIR data of the blend and the single Tg value from DSC confirmed the compatibility of the blend. To enhance the thermal and biological properties of the NaCMC-PPFMA blend, biosynthesized Ag-ZnONPs were hydrothermally incorporated into the blend at different weight ratios. The prepared materials were characterized by SEM, EDX, TEM, XRD and FTIR. The thermal stability of the materials was determined by thermogravimetric analysis (TGA), and glass transition temperatures (Tg) was determined by differential scanning calorimeter (DSC). The oxidant, antioxidant, antimicrobial, and cytotoxic properties of PPFMA, Ag-ZnONPs, PPFMA-NaCMC blend, and nanocomposites were investigated in detail. The total oxidant state (TOS) value of the NaCMC-PPFMA blend, which was 0.72 μmol equivalent H2O2/L, increased to 7.2-10.4 μmol equivalent H2O2/L with the addition of Ag-ZnONPs. Ag-ZnONPs decreased total antioxidant state (TAS) levels of the nanocomposites while increasing their oxidant activity. Therefore, an increase in the antimicrobial activity of the nanocomposites was observed. Adding Ag-ZnONPs to the NaCMC-PPFMA blend increased the thermal stability by 22 °C and the Tg value by 9 °C. Finally, the potential of Ag-ZnONPs containing nanocomposites in wound healing therapies was examined. The findings suggest that nanocomposites prepared by incorporating Ag-ZnONPs into the semi-synthetic NaCMC-PPFMA blend can be a source of bio-safe raw materials and can be used as potential wound healers.

Recent advances in plant-based polysaccharide ternary complexes for biodegradable packaging

Polysaccharide-based packaging has been directed toward the development of technologies for the generation of packaging with biodegradable materials that can serve as substitutes for conventional packaging. Polysaccharides are reliable sources of edible packaging materials with excellent renewability, biodegradability, and bio-compatibility as well as antioxidant and antimicrobial activities. Apart from these properties, packaging film developed from a single polysaccharide has various disadvantages due to undesirable properties. Thus, to overcome these problems, researchers focused on ternary blend-based bio-packaging instead of the primary and binary complex to improve their characteristics and properties. The review emphasizes the extraction of polysaccharides and their combination with other polymers to provide desirable characteristics and physico-mechanical properties of the biodegradable film which will upgrade the green packaging technology in the future generation This review also explores the advancement of ternary blend-based biodegradable film and their application in foods with different requirements and the future aspects for developing advanced biodegradable film. Moreover, the review concludes that cellulose, modified starch, and another plant-based polysaccharide film mostly provides good gas barrier property and better tensile strength, which can be used as a safeguard of perishable and semi-perishable foods which brings them closer to replacing commercial synthetic packaging.

Modified-Hydroxyapatite-Chitosan Hybrid Composite Interfacial Coating on 3D Polymeric Scaffolds for Bone Tissue Engineering

Three dimensional (3D) scaffolds have huge limitations due to their low porosity, mechanical strength, and lack of direct cell-bioactive drug contact. Whereas bisphosphonate drug has the ability to stimulate osteogenesis in osteoblasts and bone marrow mesenchymal stem cells (hMSC) which attracted its therapeutic use. However it is hard administration low bioavailability, and lack of site-specificity, limiting its usage. The proposed scaffold architecture allows cells to access the bioactive surface at their apex by interacting at the scaffold's interfacial layer. The interface of 3D polycaprolactone (PCL) scaffolds has been coated with alendronate-modified hydroxyapatite (MALD) enclosed in a chitosan matrix, to mimic the native environment and stupulate the through interaction of cells to bioactive layer. Where the mechanical strength will be provided by the skeleton of PCL. In the MALD composite's hydroxyapatite (HAP) component will govern alendronate (ALD) release behavior, and HAP presence will drive the increase in local calcium ion concentration increases hMSC proliferation and differentiation. In results, MALD show release of 86.28 ± 0.22. XPS and SEM investigation of the scaffold structure, shows inspiring particle deposition with chitosan over the interface. All scaffolds enhanced cell adhesion, proliferation, and osteocyte differentiation for over a week without in vitro cell toxicity with 3.03 ± 0.2 kPa mechanical strength.

Development and application of intelligent packaging films based on guar gum, polyvinyl alcohol and hyacinth bean (Lablab purpureus (L.) sweet) anthocyanins

The pH-response color-changeable films were prepared by adding different contents (1 %, 2 % and 3 %) of hyacinth bean anthocyanins (HBA) into guar gum/polyvinyl alcohol blend matrix. The structural characterization and optical, barrier, mechanical, thermal, antioxidant and color-changeable properties of the films were determined. The films were applied to monitor the freshness of chilled shrimp and pork. Results showed that HBA were pH-dependent color-changeable pigments that endowed the films with purple color. 2 % and 3 % of HBA improved the uniformity and compactness of the films by forming hydrogen bonds with film matrix. The barrier ability of the films against UV-vis light, water vapor and oxygen was significantly elevated by 2 % and 3 % of HBA. The mechanical, thermal and antioxidant properties of the films were improved by HBA. The films containing HBA were much sensitive to pH variation and ammonia vapor, presenting obvious color changes (purple→green→yellow-green). The films containing HBA showed good color stability when stored at 4 °C for 30 days. Moreover, the film containing 2 % HBA showed color changes (purple→green) when the chilled shrimp and pork decayed. The results suggested that the film containing 2 % HBA was suitable to monitor the freshness of meat products in intelligent packaging field.

Fabrication, Properties, and Stability of Oregano Essential Oil and Sodium Alginate-Based Wound-Healing Hydrogels

The wound dressings fabricated by polymers and oregano essential oil (OEO) can be very effective as a hydrogel. The current study has been focused on fabricating the hydrogel membranes of oregano oil encapsulated as an antibacterial agent into sodium alginate (SA) solution by solvent casting method and then evaluated the antibacterial, antioxidant activity, and physicochemical performance of SA/OEO-based polymeric membranes. The polymeric interactions, surface morphology, water absorption capability, thermal stability, and encapsulation efficiency were investigated by FT-IR, SEM, swelling ratio, DSC, and encapsulation efficiency. The percentage encapsulation efficiency of essential oil was 40.5%. FTIR validated the presence of molecular interaction between individual components. SEM images showed a rough and porous appearance for hydrogel membranes. Moreover, DSC showed that the fabricated membranes were thermally stable. The inclusion of more content OEO decreased swelling ratios. The antioxidant test was carried out by DPPH assay and antibacterial test through disc diffusion method against microbes. The results revealed that membranes containing the highest content of OEO had more excellent antioxidant and antibacterial efficacy. Therefore, the polymeric membranes of sodium alginate loaded with oregano essential oil can be employed as an effective wound-healing candidate.

Sodium alginate-sodium hyaluronate-hydrolyzed silk for microencapsulation and sustained release of kidney tea saponin: The regulation of human intestinal flora in vitro

Kidney tea saponin (KTS) exhibits considerable efficacy in lowering glucose levels; however, it does not have widespread applications owing to its low intestinal utilization. Therefore, in the present study, we prepared sodium alginate (SA)/sodium hyaluronate (HA)/hydrolyzed silk (SF) gel beads for the effective encapsulation and targeted intestinal release of KTS. The gel beads exhibited an encapsulation rate of 90.67 % ± 0.27 % and a loading capacity of 3.11 ± 0.21 mg/mL; furthermore, the release rate of KTS was 95.46 % ± 0.02 % after 8 h of simulated digestion. Fourier transform infrared spectroscopy revealed that the hydroxyl in SA/HA/SF-KTS was shifted toward the strong peak; this was related to KTS encapsulation. Furthermore, scanning electron microscopy revealed that the gel bead space network facilitates KTS encapsulation. In addition, the ability of KTS and the gel beads to inhibit α-amylase (IC50 = 0.93 and 1.37 mg/mL, respectively) and α-glucosidase enzymes (IC50 = 1.17 and 0.93 mg/mL, respectively) was investigated. In vitro colonic fermentation experiments revealed that KTS increased the abundance of Firmicutes/Bacteroidetes and butyric acid-producing bacteria. The study showed that the developed gel-loading system plays a vital role in delivering bioactive substances, achieving slow release, and increasing the abundance and diversity of intestinal flora.

Fabrication and characterisation of novel chitosan-based polymer inclusion membranes and their application in environmental remediation

Several water and wastewater technologies have been implored for the removal of dyes during wastewater treatments; however; different types have been reportedly found in surface and groundwater systems. Hence, there is a need to investigate other water treatment technologies for the complete remediation of dyes in aquatic environments. In this study, novel chitosan-based polymer inclusion membranes (PIMs) were synthesized for the removal of malachite green dye (MG) which is a recalcitrant of great concern in water. Two types of PIMs were synthesized in this study, the first PIM (PIMs-A) was composed of chitosan, bis-(2-ethylhexyl) phosphate (B2EHP), and dioctyl phthalate (DOP). While, the second PIMs (PIMs-B) were composed of chitosan, Aliquat 336, and DOP. The physico-thermal stability of the PIMs was investigated using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), both PIMs demonstrated good stability with a weak intermolecular force of attraction amongst the various components of the membranes. The effects of the initial concentration of MG, pH of the MG solution, stripping solution, and time were investigated. At optimum conditions, both membranes (PIM-A and B) recorded the highest efficiencies of 96 % and 98 % at pH 4 and initial contaminants concentration of 50 mg/L, respectively. Finally, both PIMs were used for the removal of MG in different environmental samples (river water, seawater, and tap water) with an average removal efficiency of 90 %. Thus, the investigated PIMs can be considered a potential suitable technique for the removal of dyes and other contaminants from aquatic matrices.

Agaricus blazei Murill polysaccharides/alginate/poly(vinyl alcohol) blend as dressings for wound healing

Macromolecules with antioxidant properties such as polysaccharides from Agaricus blazei Murill mushroom (PAbs) are an excellent option for manufacturing wound dressings. Based on this, this study aimed to analyze preparation, physicochemical characterization, and assessment of the potential wound-healing activity of films based on sodium alginate and polyvinyl alcohol loaded with PAbs. PAbs did not significantly alter the cell viability of human neutrophils in a concentration range of 1-100 μg mL^-1. The Infrared Spectroscopy (FTIR) indicates that the components present in the films (PAbs/Sodium Alginate (SA)/Polyvinyl Alcohol (PVA)) present an increase in hydrogen bonds due to the increase of hydroxyls present in the components. Thermogravimetry (TGA), Differential Scanning Calorimetry (DSC) and X-ray Diffraction (XRD) characterizations indicate a good miscibility between the components where PAbs increasing the amorphous characteristics of the films and that the addition of SA increased the mobility of the chains PVA polymers. The addition of PAbs to films significantly improves properties such as mechanical, thickness, and water vapor permeation. The morphological study evidenced good miscibility between the polymers. The wound healing evaluation indicated that F100 film presented better results from the fourth day onward compared to the other groups. It favored the formation of a thicker dermis (476.8 ± 18.99 μm), with greater collagen deposition and a significant reduction in malondialdehyde and nitrite/nitrate, markers of oxidative stress. These results indicate that PAbs is a candidate for wound dressing.

Polymeric Membranes of Chitosan/Aloe Vera Gel Fabrication With Enhanced Swelling and Antimicrobial Properties for Biomedical Applications

Since ancient times, medicinal plants have been used as traditional medicine to treat a variety of ailments. Aloe vera (AV) gel's therapeutic potential is one of the most effective approach in the fabrication of functional materials. The current study aimed to prepare the AV and chitosan (CS) membranes using various cross-linkers that were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), and ultraviolet-visible (UV-Visible) techniques, as well as swelling ratio and antimicrobial studies. SEM analysis revealed that the membrane is porous, with interconnected pores. The inclusion of AV contents in the membrane improved thermal stability and crystallinity. The swelling ratio of the ACPG-3 membrane with a 2:1 CS to AV ratio was 366%. The membranes showed promising antimicrobial activity against Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Pasteurella multocida strains. The findings revealed that polymeric CS/AV membranes have effective potential for use in the biomedical field.

Films composed of white angico gum and chitosan containing chlorhexidine as an antimicrobial agent

Anadenanthera colubrina, popularly known as white angico, is a species extensively cultivated in Brazil, mainly in the cerrado region, including the state of Piauí. This study examines the development of films composed of white angico gum (WAG) and chitosan (CHI) and containing chlorhexidine (CHX), an antimicrobial agent. The solvent casting method was used to prepare films. Different combinations and concentrations of WAG and CHI were used to obtain films with good physicochemical characteristics. Properties such as the in vitro swelling ratio, the disintegration time, folding endurance, and the drug content were determined. The selected formulations were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the CHX release time and antimicrobial activity were evaluated. CHX showed a homogenous distribution in all CHI/WAG film formulations. The optimised films showed good physicochemical properties with 80% CHX release over 26 h, which is considered promising for local treatment of severe lesions in the mouth. Cytotoxicity tests of the films did not show toxicity. The antimicrobial and antifungal effects were very effective against the tested microorganisms.

Guar gum-based nanoformulations: Implications for improving drug delivery

Poorly soluble drugs are reported to easily degrade in the gastrointestinal tract and contribute in limiting the effect of drug to its targeted site. Oral administration of drug is one of the prominent ways to deliver a drug, although, it experiences barriers like acidic pH, presence of microflora and enzymes in the gastrointestinal tract. Collectively all of these participate in the degradation of drug before it reaches its target site and thus, they impede the sustained effect of drug. A quest of choosing a polymer with good stability profile and releasing the drug to its targeted site is always been a challenge for the scientists worldwide. Many polymers have been reported to prevent the degradation of drug and one such naturally occurring biocompatible polymer is guar gum. Guar gum-based nanoformulations have been extensively used in past decades to achieve controlled drug release which defines its importance. The coating of guar gum over the drug improves the bioavailability of the drug and thus helps in minimizing the risk of drug degradation. This review intends to highlight the beneficial role of guar gum-based nanoformulations to improve drug delivery by ameliorating the bioavailibility.

Production, characterization, and antimicrobial activity of almond gum/polyvinyl alcohol/chitosan composite films containing thyme essential oil nanoemulsion for extending the shelf-life of chicken breast fillets

In this study, thyme essential oil (TEO) nanoemulsion was immobilized within composite films based on almond gum (AG), polyvinyl alcohol (PVA), and chitosan (CS). The physical, mechanical, water barrier, microstructural and antimicrobial properties of composite films were assessed. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the intermolecular interactions in the composite film matrix. The results indicated that the incorporation of TEO into the composite films increased thickness, moisture content, and water vapor permeability, while it reduced light transmittance and transparency value. The antimicrobial activity of films against gram-negative and gram-positive bacteria was tested using a disc diffusion method. The effect of composite on the microbiological properties of chicken breast fillets was investigated during refrigerated storage for 21 days. The microbial populations of total mesophilic, psychrotrophic, and lactic acid bacteria of the samples that were coated with the composite containing TEO were lower than the permitted limit after 21 days while for blank samples they were higher than 7 log CFU/g after 7 days which is considered as the maximum acceptable total count limit. Results disclosed that AG/PVA/CS composite films containing TEO nanoemulsion can be applied as eco-friendly active food packaging to enhance the shelf-life of food products.

Poly Lactic-Co-Glycolic Acid Nano-Carriers for Encapsulation and Controlled Release of Hydrophobic Drug to Enhance the Bioavailability and Antimicrobial Properties

This study focusses on the fabrication of nano-carriers for delivery of ciprofloxacin through the nanoprecipitation process. This was done to examine the release of drug at the pH of stomach to find out the antibacterial action of ciprofloxacin loaded nanoparticles (NPs). Prepared NPs were characterized by Fourier Transform Infra-Red (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), and particle size analyzer (PSA) techniques. Drug yield, loading, and sustained release was studied as function of time (up to 8 h). Antibacterial activity of ciprofloxacin loaded NPs were also determined against different gram-positive and gram-negative bacteria. Results revealed that nanoprecipitation is a suitable method for encapsulation of ciprofloxacin in poly(lactic-co-glycolic acid) PLGA NPs. The drug yield and drug loading were found to be 60%. The size range of NPs observed by PSA was in the range of 5.03-6.60 nm. It can be concluded that nanoformulation of ciprofloxacin loaded PLGA NPs can be used in stomach for longer period of time to enhance the bioavailability of the drug.

Green biosynthesis of silver nanoparticles using sodium alginate extracted from Sargassum latifolium and their antibacterial activity

Brown seaweed Sargassum latifolium produces a sufficient amount of alginate. It is derived from the cell wall of seaweed as a natural anionic polysaccharide. In the present study, alginate was extracted from S. latifolium, its physicochemical properties, the potential for silver nanoparticles formation, characterization of alginate silver nanoparticles, and its antibacterial activity was studied. Physical analysis of extracted sodium alginate as colour (pale yellow), yield (25.34%), water content (13.17%), ash content (15.5%), and pH (8.6) were investigated. In addition, UV scan analyses of extracted alginate illustrated that the bioactive compounds separated in the range of 200–400 nm. On the other hand, ultraviolet–visible spectroscopy (UV–Vis) scan analysis of synthesized alginate silver nanoparticles gave a maximum peak at 413 nm. Besides that, Fourier Transforms Infrared spectroscopy (FT-IR) analysis of alginate, and alginate silver nanoparticles revealed a variety of functional groups, such as –OH, –NH, –CH, –COOH, CO, and C–C, and thermogravimetric analysis of extracted sodium alginate demonstrated thermal degradation occurs in two steps; Dehydration followed by degradation to Na2CO3 and a carbonized substance that breaks down slowly between 600 and 750 °C in N2. Biochemical contents, protein, and carbohydrate were receptively, respectively, and were 0.89 and 78.56 mg/g dry wt. Alginate silver nanoparticles recorded maximal antibacterial activity against Pseudomonas aeruginosa, Staphylococcus aureus, Klebsiella pneumonia, Escherichia coli, Bacillus subtilis, and Bacillus cereus more than alginate. On the other hand, alginate has no activity against E. coli.

Removal of Cr(III) from Aqueous Solution Using Labeo rohita Chitosan-Based Composite

This study focusses on the synthesis of chitosan-cellulose composite membrane derived from Labeo rohita fish scales (FS) for the removal of Cr(III) from aqueous solution, while chromium is a serious threat to groundwater. Waste FS are valorized to chitosan by demineralization, deproteination, and deacetylation successively. Cellulose was extracted from sugarcane bagasse using acidic hydrolysis. Chitosan-based cellulose composite porous membrane was fabricated by evaporating solvent from polymer solution in petri dish. The impact of pH, contact time, and absorbent dosage on the removal of Cr(III) from an aqueous solution was investigated. Atomic absorption spectrophotometer was used to check the Cr(III). Results showed that chitosan comprising 85% degree of deacetylation was achieved by alkali treatment, while yield was 22%. FTIR analysis confirmed the chitosan and chitosan-cellulose-based composite membrane. Morphology studies showed that the cellulose was strongly staggered and due to the chitosan, the surface of cellulose became rougher, which is good to enhance the adsorption capacity. The maximum removal 57% of Cr(III) from aqueous solution was observed at pH 6 at 60 min and 50 mg dosage of adsorbent. The minimum removal (47%) of Cr (III) was found at pH 2. These results confer that Labeo rohita-based chitosan-cellulose composite membrane has great potential for the removal of metals from industrial effluents.

Adsorption kinetics for the removal of toxic Congo red dye by polyaniline and citrus leaves as effective adsorbents

This study focusses on the synthesis of polyaniline (PANI) and polyaniline base adsorbent utilizing Citrus limon leaves (CL) powder. The polyaniline base adsorbent with C. limon was synthesized using the same process as polyaniline synthesis, but with the addition of leaves powder. PANI and PANI based adsorbent with C. limon leaves powder (PANI/CL) were characterized by Fourier Transform Infra-Red (FTIR), UV-Visible spectroscopy and Scanning Electron Microscopy (SEM). This synthesized material was employed for the removal of congo red (CR) dye from industrial wastewater. Furthermore, the Langmuir, Temkin and Freundlich isotherms were also applied to evaluate experimental results. PANI is an efficient adsorbent for CR removal with 71.9 mg/g, while PANI/CL is an efficient adsorbent with 80 mg/g removal of dye according to a comparison of maximal adsorption capabilities. The data concludes that the prepared adsorbents could possibly be employed for the removal of toxic dyes from industrial effluents at large scale and ultimately could help in improving the environment.

Date-Palm-Derived Cellulose Nanocrystals as Reinforcing Agents for Poly(vinyl alcohol)/Guar-Gum-Based Phase-Separated Composite Films

The current study delineates the use of date-palm-derived cellulose nanocrystals (dp-CNCs) as reinforcing agents. dp-CNCs were incorporated in varying amounts to poly(vinyl alcohol)/guar-gum-based phase-separated composite films. The films were prepared by using the solution casting method, which employed glutaraldehyde as the crosslinking agent. Subsequently, the films were characterized by bright field and polarizing microscopy, UV-Vis spectroscopy, FTIR spectroscopy, and mechanical study. The microscopic techniques suggested that phase-separated films were formed, whose microstructure could be tailored by incorporating dp-CNCs. At higher levels of dp-CNC content, microcracks could be observed in the films. The transparency of the phase-separated films was not significantly altered when the dp-CNC content was on the lower side. FTIR spectroscopy suggested the presence of hydrogen bonding within the phase-separated films. dp-CNCs showed reinforcing effects at the lowest amount, whereas the mechanical properties of the films were compromised at higher dp-CNC content. Moxifloxacin was included in the films to determine the capability of the films as a drug delivery vehicle. It was found that the release of the drug could be tailored by altering the dp-CNC content within the phase-separated films. In gist, the developed dp-CNC-loaded poly(vinyl alcohol)/guar-gum-based phase-separated composite films could be explored as a drug delivery vehicle.

Development and evaluation of Moringa extract incorporated Chitosan/Guar gum/Poly (vinyl alcohol) active films for food packaging applications

The present study contributes the synthesis of active films with the incorporation of moringa extract (ME) into chitosan (CS)/guar gum (GG)/poly(vinyl alcohol) (PVA) matrix (CGPM) by simple solvent casting technique. The effect of ME on the mechanical, thermal, structural and morphological properties of CGPM active films were investigated. ME has shown a marked influence on the optical, thermal properties and swelling behaviour of CGPM active films. The improvement in the tensile strength of CGPM-1 active film (53.7 MPa) was observed compared to control CS/GG/PVA (CGP) film. DSC study revealed that glass transition temperature (Tg) and melting temperature (Tm) decreased with the addition of ME in the CGP matrix, which confirmed the miscibility among the components of active films. There was an improvement in the thermal stability of the CGPM active films. The FTIR study confirmed the molecular interaction between ME and CS/GG/PVA matrix. The XRD analysis showed a decrease in crystallinity with an increase in the ratio of CS for CGPM active films. The CGPM active films were an excellent barrier to UV- light and have exhibited a decrease in moisture adsorption and water solubility compared to CGP control film. The inclusion of ME in the CGP matrix leads to the formation of a dense compact surface, which in turn enhanced hydrophobicity of active films. The CGPM active films showed minimum WVP, OP values and overall migration values were within the limits of 10 mg/dm2. It was also observed that CGPM active films effectively inhibited the growth of E. coli and S. aureus bacteria. These findings suggest CGPM active films are biodegradable, biocompatible, non-toxic and hence can find application as food packaging materials.

Chitosan as an Underrated Polymer in Modern Tissue Engineering

Chitosan is one of the most well-known and characterized materials applied in tissue engineering. Due to its unique chemical, biological and physical properties chitosan is frequently used as the main component in a variety of biomaterials such as membranes, scaffolds, drug carriers, hydrogels and, lastly, as a component of bio-ink dedicated to medical applications. Chitosan's chemical structure and presence of active chemical groups allow for modification for tailoring material to meet specific requirements according to intended use such as adequate endurance, mechanical properties or biodegradability time. Chitosan can be blended with natural (gelatin, hyaluronic acid, collagen, silk, alginate, agarose, starch, cellulose, carbon nanotubes, natural rubber latex, κ-carrageenan) and synthetic (PVA, PEO, PVP, PNIPPAm PCL, PLA, PLLA, PAA) polymers as well as with other promising materials such as aloe vera, silica, MMt and many more. Chitosan has several derivates: carboxymethylated, acylated, quaternary ammonium, thiolated, and grafted chitosan. Its versatility and comprehensiveness are confirming by further chitosan utilization as a leading constituent of innovative bio-inks applied for tissue engineering. This review examines all the aspects described above, as well as is focusing on a novel application of chitosan and its modifications, including the 3D bioprinting technique which shows great potential among other techniques applied to biomaterials fabrication.

Guar (Cyamopsis tetragonoloba L.) plant gum: From biological applications to advanced nanomedicine

Natural polymers are an efficient class of eco-friendly and biodegradable polymers, because they are readily available, come from natural sources, inexpensive and can be chemically modified with the correct reagents. Guar gum (GG) is a natural polymer with great potential to be used in pharmaceutical formulations due to its unique composition and lack of toxicity. GG can be designed to suit the needs of the biological and medical engineering sectors. In the development of innovative drug delivery systems, GG is commonly utilized as a rate-controlling excipient. In this review, different properties of GG including chemical composition, extraction methods and its usefulness in diabetes, cholesterol lowering, weight control, tablet formulations as well as its food application were discussed. The other purpose of this study is to evaluate potential use of GG and its derivatives for advanced nanomedicine such as drug delivery, tissue engineering and nanosensing. It should be noted that some applicable patents in medical area have also been included in the rest of this survey to extend knowledge about guar gum and its polymeric nature.

Tunable and tough porous chitosan/β-cyclodextrin/tannic acid biocomposite membrane with mechanic, antioxidant, and antimicrobial properties

Herein, tannic acid (TA)-reinforced chitosan (CHS)/β-cyclodextrin (β-CD) biocomposite membranes were prepared by TA solution incubating treatment. The functional groups, crystal structure, and morphological characterizations of the prepared biocomposite membranes were investigated using various methods. The biocomposite membranes were investigated in terms of their wettability, porosity, swelling degree, and water uptake. In vitro antioxidant investigation was carried out through DPPH assay. Moreover, the prepared biocomposite membranes were evaluated for their antimicrobial ability against three different microbial species. The introduction of TA effectively improved the swelling behavior, mechanical strength, and porosity of the biocomposite membranes. TA increased the tensile strength from 0.7 ± 0.2 MPa to a maximum of 2.2 ± 0.6 MPa and elongation at break from 26.9 ± 0.7% to a maximum of 36.7 ± 3.5%. The biocomposite membranes showed an initial burst release of TA (~40%) within 6 h, followed by a gradual release of 100% by 18 h. Furthermore, the introduction of TA into the biocomposite membranes further improved the antimicrobial activities against both bacteria and yeast, as well as the in vitro antioxidant potential. As a consequence, the prepared biocomposite membranes could potentially be used as scaffold in broaden biomedical fields due to their adaptable structure, porosity, greatly antioxidant, and antimicrobial activity.

Injectable, Self-Healing, and Biocompatible N,O-Carboxymethyl Chitosan/Multialdehyde Guar Gum Hydrogels for Sustained Anticancer Drug Delivery

Local delivery of anticancer agents via injectable hydrogels could be a promising method for achieving spatiotemporal control on drug release as well as minimizing the disadvantages related to the systemic mode of drug delivery. Keeping this in mind, we report the development of N,O-carboxymethyl chitosan (N,O-CMCS)-guar gum-based injectable hydrogels for the sustained delivery of anticancer drugs. The hydrogels were synthesized by chemical crosslinking of multialdehyde guar gum (MAGG) and N,O-CMCS through dynamic Schiff base linkages, without requiring any external crosslinker. Fabrication of injectable hydrogels, involving N,O-CMCS and MAGG via Schiff base crosslinking, is being reported for the first time. The hydrogels exhibited pH-responsive swelling behavior and good mechanical properties with a storage modulus of about 1625 Pa. Due to the reversible nature of Schiff base linkages, hydrogels displayed excellent self-healing and thixotropic properties. Doxorubicin (Dox), an anticancer agent, was loaded onto these hydrogels and its release studies were conducted at pH 7.4 (physiological) and pH 5.5 (tumoral). A sustained release of about 67.06% Dox was observed from the hydrogel after 5 days at pH 5.5 and about 32.13% at pH 7.4. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay on the human embryonic kidney cell line (HEK-293) and the hemolytic assay demonstrated the biocompatible nature of the hydrogels. The Dox-loaded hydrogel exhibited a significant killing effect against breast cancer cells (MCF-7) with a cytotoxicity of about 72.13%. All the data presented support the efficiency of the synthesized N,O-CMCS/MAGG hydrogel as a biomaterial that may find promising applications in anticancer drug delivery.

Highly photosensitized Mg4 Si6O15 (OH)2·6H2O@guar gum nanofibers for the removal of methylene blue under solar light irradiation

In the present investigation, photosensitized nanofibers (NFs) based on guar gum (GG)/poly(vinyl alcohol) (PVA)/Mg4Si6O15(OH)2·6H2O (SP) (modified by 1, 4-diamminobutane [DAB]) was fabricated by electrospinning approach and same was used for the degradation of dye under solar light irradiation. For electrospinning of NFs, the acceleration voltage, nozzle flow rate and collector distance levels of 19,000 KV, 0.5 mL/h and 3 cm were optimum conditions along with 7% (w/v) blend of GG/PVA (1.4:5.6 wt/wt) and 0.01 g modified Mg4Si6O15(OH)2·6H2O. The exfoliation, intercalation and clay organophilization in GG/PVA/Mg4Si6O15(OH)2·6H2O (GG/PVA/SP) NFs were examined by FTIR analysis. The photocatalytic activity (PCA) of NF was studied under the solar light irradiation for methylene blue (MB) dye degradation. The photosensitized GG/PVA/SP2 (G3) showed promising PCA under visible light and G3 furnished higher degradation of MB dye (99.1%) within 10 min of irradiation. Results revealed that GG/PVA/SP based NFs are highly active under solar light, which can be applied for the treatment of wastewater.

Fabrication and characterization of novel antibacterial chitosan/dialdehyde guar gum hydrogels containing pomegranate peel extract for active food packaging application

This study aimed to investigate synthesis and structural characteristics of the chitosan (CS) - modified dialdehyde guar gum (DAGG) hydrogel through the Schiff base reaction. The highest swelling capacity was achieved as about 12,000% of dry weight of the freeze-dried powder at CS: DAGG hydrogel with the mixing ratio of 30:70. The swelling ratio was not affected by changes in pH, which could be considered as an important property in the control of moisture in absorbent pad. The FTIR results indicated that the new amide groups have been formed at 1680 cm^-1, which can be attributed to the covalent bond between the amide groups of CS and the aldehyde groups of GG. Based on a SEM image, the prepared hydrogel showed the porous structure so it verified the crosslinking formation between the two polymers. Rheological analyses confirmed that formation compact and porous structure led to some noteworthy improvements in the strength of hydrogel prepared with a high ratio of DAGG. The hydrogel loaded with 5% pomegranate peel extract (PPE) showed both good antioxidant (81.13%) and antimicrobial activities. The hydrogel was observed to have a good potential to be used as an antibacterial pad.

Application of Fish Collagen-Nanochitosan-Henna Extract Composites for the Control of Skin Pathogens and Accelerating Wound Healing

Skin is the largest protective organ that could be recurrently wounded and attacked by microorganisms. The wounded skin safeguarding and supporting were intended through natural derivatives. Fish collagen (Cg) type I, extracted from sea bream (Spondyliosoma cantharus), chitosan nanoparticles (NCht) from shrimp shells, and henna (Lawsonia inermis L.) leaves extract (He) were produced and physiochemically characterized. The antimicrobial potentialities of these compounds and their composites were assessed toward skin pathogens (Candida albicans and Staphylococcus aureus) using various assaying methods and microimaging techniques. The infrared and electrophoretic analysis of Cg validated its characteristics, and the IR-spectroscopic analysis of the compounds/composites indicated their physiochemical attributes and interrelations. The produced NCht particles had a diameter range of 64.6-308.8 nm, 104 nm mean diameter, and +31.3 mV zeta potentiality. Both NCht, He, and NCht/He composite exhibited significant antimicrobial potentiality toward skin pathogens; NCht/He was the strongest with inhibitory concentrations of 20.0 and 22.5 μg/mL and inhibition zones of 25.7 and 26.8 mm against S. aureus and C. albicans, respectively. The electron micrographs verified the synergistic microbicidal action of NCht/He, as they led to severe microbial lysis and deformations. The skin wounds’ treatment with NCht/He/Cg composite promoted the fastest and complete healing of wounded rats’ skin during 8 days of local treatment, with the absence of inflammation and infection signs; treated with NCht/He/Cg composite, the wound area vastly reduced from 63.6 mm2 to 15.9 and 9.1 mm2 after 2 and 4 days, respectively. The natural NCht/He/Cg composites are recommended as topical applications for optimum skin disinfection and regeneration.

Iron Species-Supporting Hydrophobic and Nonswellable Polytetrafluoroethylene/Poly(acrylic acid-co-hydroxyethyl methacrylate) Composite Fiber and Its Stable Catalytic Activity for Methylene Blue Oxidative Decolorization

Polytetrafluoroethylene emulsion was ultrasonically mixed with an extremely spinnable poly(acrylic acid-co-hydroxyethyl methacrylate) solution to get a dispersion with good spinnability, and the obtained dispersion was then wet-spun into water-swellable fiber. Crosslinking agents and iron species were simultaneously introduced into the water-swellable fiber through simple impregnation and water swelling. A composite fiber with Fenton reaction-catalyzing function was then fabricated by sequentially conducting crosslinking and sintering treatment. Due to crosslinking-induced good resistance to water swelling and PTFE component-induced hydrophobicity, the composite fiber showed a highly stable activity to catalyze H₂O₂ to oxidatively decolorize methylene blue (MB). Within nine cycles, the composite fiber could decolorize more than 90% of MB within one minute in the presence of H₂O₂ and did not show any attenuation in MB decolorization efficiency. The composite fiber still could reduce the total organic carbon of MB aqueous solution from 18.3 to 10.3 mg/L when used for the ninth time. Therefore, it is believable that the prepared fiber has good and broad application prospects in the field of dye wastewater treatment.