Synthesis and molecular characterization of chitosan/starch blends based polyurethanes

Physical and chemical characterization of chitin and chitosan extracted under different treatments from black soldier fly

The shell of Hermetia illucens L. contains considerable amounts of chitin, which has various biological activities. So far, few studies have focused on chitin of Hermetia illucens L. as a source of chitosan and oligosaccharides. There is great potential for utilizing Hermetia illucens L. chitin to produce chitosan films in biomaterials. We studied different extraction conditions for chitin and extracted it from black soldier fly (BSF) (Hermetia illucens L.). Three processing steps were adopted: (1) demineralization, (2) deproteinization, and (3) decolorization. The chemical components (moisture, ash, protein, fat, residual protein, and residual mineral contents) and physicochemical characteristics of the chitin and chitosan extracted under these three conditions were determined. In addition, Fourier transform infrared spectroscopy and X-ray diffraction were used to analyze the extracted chitin and commercial samples, and the results showed that demineralization-deproteinization-decolorization treatments could achieve the highest chitin yield (7.18 ± 0.11 %), chitosan yield (64.22 ± 0.79 %), and the best purity (residual protein 0.56 ± 0.01 % and residual ash 0.58 ± 0.04 %), making it the best treatment method. Using this method, the residues produced from farmed BSF can be recycled and used as a new source of chitin.

Synthesis and optimization of molecular weight of chitosan and carboxymethyl cellulose based polyurethanes

For the first time in this research, using a mixture design approach, polyurethanes (PUs) based on chitosan (CSN) and carboxymethyl cellulose (CMC) were synthesized to develop a high molecular weight polymer. In the synthesis process, a reaction between isophorone diisocyanate (IPDI) and hydroxyl-terminated polybutadiene was carried out to synthesize a prepolymer containing free NCO groups at the corners. This prepolymer was further reacted with changing moles ratio of CSN and CMC following the principles of statistical mixture design. The structural confirmation of the developed PUs was carried out through spectroscopic techniques (FTIR and NMR). The molecular weights of the PU specimens were characterized using gel permeation chromatography. The findings demonstrated that the interaction between CMC and CSN led to a notable increase in the molecular weights of the samples, supported by a significant p-value of 0.006. Additionally, the analysis of variance (ANOVA) disclosed that the employed mixture design and the resulting interaction model effectively account for 98 % of the total variation observed in the molecular weights. The sample labeled as PUS-3 (CMC0.50:CSN0.50) emerged as the most significant formulation, exhibiting a noteworthy 27.9 % improvement in the polymer molecular weight compared to the base sample, denoted as PUS-1 (CMC1.00:CSN0.00).

Modulating alginate-polyurethane elastomer properties: Influence of NCO/OH ratio with aliphatic diisocyanate

This research addresses the need for enhanced biomaterials by investigating the influence of the NCO/OH ratio on sodium alginate-based polyurethane elastomers(Al-PUEs), offering novel insights into their structural, thermal, mechanical and swelling behavior. Al-PUEs were prepared by blending the chain extenders with key ingredients in a specific molar ratio using aliphatic HMDI and HTPB monomers. The chemical linkages, crystalline behavior, homogeneity, and surface morphology of PUEs were evaluated by FT-IR, XRD, SEM, and EDX analysis. Thermo-mechanical studies were performed using TGA, DSC and tensile testing. Swelling behavior and absorption analysis were analyzed in DMSO and water. The analysis indicated that the hydrophilicity and swelling behavior of the prepared PUEs were affected by the addition of sodium alginate content. The results exhibit the tailor-made network structure of Al-PUEs, resulting in better thermal stability, elasticity of materials via stress-strain behavior and marvelous characteristic features than traditional high-tech yields. Furthermore, the resulting Al-PUEs are potential candidates for biomedical implants.

Chitosan-based biopolyelectrolyte complexes intercalated montmorillonite: A strategy for green flame retardant and mechanical reinforcement of polypropylene composites

Due to dwindling petroleum resources and the need for environmental protection, the development of bio-based flame retardants has received much attention. In order to explore the feasibility of fully biomass polyelectrolyte complexes (PEC) for polyolefin flame retardant applications, chitosan (CS), sodium alginate (SA), and sodium phytate (SP) were used to prepare CS-based fully biomass PEC intercalated montmorillonite (MMT) hybrid biomaterials (SA-CS@MMT and SP-CS@MMT). The effects of two hybrid biomaterials on the fire safety and mechanical properties of intumescent flame-retardant polypropylene (PP) composites were compared. The SP-CS@MMT showed the best flame retardancy and toughening effect at the same addition amount. After adding 5 wt% SP-CS@MMT, the limiting oxygen index (LOI) value of PP5 reached 30.9 %, and the peak heat release rate (pHRR) decreased from 1348 kW/m2 to 163 kW/m2. In addition, the hydrogen bonding between polyelectrolyte complexes significantly improved the mechanical properties of PP composites. Compared with PP2, the tensile strength of PP5 increased by 59 %. This study provided an efficient and eco-friendly strategy for the large-scale production of renewable biomaterials with good thermal stability and expanded the application of macromolecular biomaterials in the field of fire safety.

Assessing physicochemical characteristics of a shear-thinning polysaccharide mucilage extracted from marshmallow root (Althaea officinalis L.) by an ohmic heating system

Althaea officinalis L. root mucilage holds promise for food industries due to its functional properties. Despite various extraction techniques, ohmic systems remain underexplored for mucilage extraction. This study aimed to compare the efficacy of mucilage extraction using ohmic systems with maceration and investigate their physicochemical properties. The mucilage extraction was carried out utilizing maceration (M), ohmic-assisted extraction (OAE), and ohmic-assisted vacuum extraction (OAVE). Various parameters were evaluated, such as densities and specific energy consumption. The mucilage obtained by OAE had the highest yield (8.9 %). The highest solubility corresponded to the mucilage obtained by the OAE system (85.18 % at 65 °C). OAVE mucilage had 76.16 % swelling and 82.5 g water/g dry sample binding capacity, while OAE mucilage had 19.6 g water/g dry sample binding capacity. The OAVE mucilage oil absorption (12.3 g oil/g dry sample) was almost twice that of the OAE system. Rheological analysis characterized them as a pseudoplastic behavior. DSC thermogram of mucilage samples exhibited a singular endothermic peak (92.05 to 108.3 °C). FTIR analysis highlighted that the primary constituents of mucilage samples predominantly consisted of polysaccharides. This study concluded that ohmic-assisted extraction was the most efficient method for obtaining mucilage. Further research could explore the potential applications of this mucilage.

Transformative enhancement of cellulosic textile properties via metallic oxide deposition: Comprehensive analysis of structural, optical, and thermoelectric traits

This novel research addresses the critical need for sustainable and efficient materials, aiming to enhance the optical and thermoelectric properties of Aluminum doped Zinc Oxide (Al-doped ZnO) on cellulose fabric for diverse applications. At first stage, Cellulosic fabric of Al-doped ZnO were experimentally studied in detail with respect to varying levels of annealing temperature. Structural analysis unveiled structural evolution in hexagonal crystal formations with a reduction in particle size up to 27.5 % on average, with increased temperature. Further, Raman spectroscopy revealed the doping effects on the vibrational modes of ZnO, potentially due to alterations in lattice structure. The ZnO optical modes are found as E2 (low) = 110 cm-1 with observed phonon frequency in the Raman spectra of ZnO at A1 (TO) = 364 cm-1. Fourier transform infrared spectroscopy (FTIR) revealed the presence of characteristic stretching of developed material. Furthermore, the optical characters revealed a decrement of 43.22 % in bandgap values with increasing annealing temperature. The analysis of thermoelectric attributes documented that the prominent sample annealed at 300°C exhibited the maximum Seebeck coefficient and power factor of 2.1 × 10-3 μV/oC and 5.8 × 10-21 Wm-1 K-2, respectively. At second stage the optical characteristics of experimentally optimized sample were rigorously studied through the application of Material Studio software, while varying the doping ratio.

Recent Advances in the Preparation and Application of Bio-Based Polyurethanes

Amid environmental pollution and resource depletion, developing and utilizing biomass resources as alternatives to petroleum is a prominent research focus. Driven by environmental protection and sustainable development, the shift from petroleum-based to bio-based polyurethane is a prevailing trend in polyurethane material development. Biomass sources such as vegetable oil, polysaccharides, and lignin offer extensive application prospects in bio-based polyurethane production. Functional modifications of these polyurethanes can further expand their application range. This article explores the preparation of various bio-based polyurethanes, their applications across different fields, and their anticipated future development and uses.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Comparison of lactic and propionic acid hydrolysis for production of xylo-oligosaccharides and ethanol from polysaccharides in Toona sinensis branch

Xylan-type hemicellulose hydrolysis by an organic acid solution for the production of xylo-oligosaccharides (XOS) is efficient and eco-friendly, but the effects of different organic acids on XOS production from Toona sinensis branch (TB) biomass is limited. In this work, under the conditions of 170 °C for 60 min, 33.1 % and 38.7 % XOS yields were obtained from polysaccharides present in TB by 2 % lactic acid (LA) and 6 % propionic acid (PA), respectively. Then 77 % of the lignin was removed by hydrogen peroxide-acetic acid pretreatment system, and 39.5 % and 44.7 % XOS yield were obtained from polysaccharides in delignification TB by 2 % LA and 6 % PA, respectively. It was found that PA hydrolysis, especially from delignified TB, resulted in higher XOS yield and purity compared to LA hydrolysis. Moreover, the content of byproducts (xylose, hydroxymethyl-furfural and furfural) in PA hydrolysate was lower. Following the hydrolysis process, the simultaneous saccharification and fermentation of the TB solid residue achieved an ethanol yield of 71.5 %. This work proposed an integrated process to preferentially convert the TB hemicellulose into valuable XOS and then convert the cellulose into ethanol. This process had the advantages of eliminating the need for isolation and purification of xylan, and the potential to obtain multiple products from the same raw material.

A review of nanotechnology in enzyme cascade to address challenges in pre-treating biomass

Nanotechnology has become a revolutionary technique for improving the preliminary treatment of lignocellulosic biomass in the production of biofuels. Traditional methods of pre-treatment have encountered difficulties in effectively degrading the intricate lignocellulosic composition, thereby impeding the conversion of biomass into fermentable sugars. Nanotechnology has enabled the development of enzyme cascade processes that present a potential solution for addressing the limitations. The focus of this review article is to delve into the utilization of nanotechnology in the pretreatment of lignocellulosic biomass through enzyme cascade processes. The review commences with an analysis of the composition and structure of lignocellulosic biomass, followed by a discussion on the drawbacks associated with conventional pre-treatment techniques. The subsequent analysis explores the importance of efficient pre-treatment methods in the context of biofuel production. We thoroughly investigate the utilization of nanotechnology in the pre-treatment of enzyme cascades across three distinct sections. Nanomaterials for enzyme immobilization, enhanced enzyme stability and activity through nanotechnology, and nanocarriers for controlled enzyme delivery. Moreover, the techniques used to analyse nanomaterials and the interactions between enzymes and nanomaterials are introduced. This review emphasizes the significance of comprehending the mechanisms underlying the synergy between nanotechnology and enzymes establishing sustainable and environmentally friendly nanotechnology applications.

Exploring the synergistic effect of carboxymethyl cellulose and chitosan in enhancing thermal stability of polyurethanes through statistical mixture design approach

The thermal stability of polyurethanes, known for its limitations, was addressed in this research by seeking improvement through the introduction of carbohydrate-based chain extenders. In this research paper, we systematically sought to improve the thermal resistance of polyurethanes by incorporating carboxymethyl cellulose and chitosan, representing a pioneering application of the mixture design approach in their preparation. In this synthesis, hydroxyl-terminated polybutadiene and isophorone diisocyanate (IPDI) were reacted to prepare -NCO terminated prepolymer, which was subsequently reacted with varying mole ratios of CMC and CSN to develop a series of five PU samples. The prepared PU samples were characterized using the Fourier-transformed infrared spectroscopic technique. Thermal pyrolysis of PU samples was examined using thermal gravimetric analysis (TGA). It was observed that, among all the samples, PUS-3 showed remarkable thermal stability over a wide temperature range. A comprehensive statistical analysis was conducted to substantiate the experimental findings. It was estimated that CMC and CSN significantly enhance the thermal stability of the samples when involved in an interaction fashion. The ANOVA Table for the mixture design demonstrates that over 90 % of the total variation in thermal stability is explained by the mixture model across a wide temperature range. Moreover, PSU-3 exhibited 4 % more thermal stability over a wide range of temperatures on average, as compared to contemporary samples.

Development of lactic acid based chain extender and soybean oil-derived polyurethanes for ecofriendly sustained drug delivery systems

In the present study, a range of sustainable, biocompatible and biodegradable polyurethanes (PU-1 to PU-4) were synthesized using different combinations of biobased polyol (obtained through the epoxidation of soybean oil, followed by ring opening with ethanol) and polyethylene glycol (PEG) and isophorone diisocyanate. The sustainable chain extender used in this study was synthesized by the esterification of lactic acid with ethylene glycol (EG). The synthesized PU samples were characterized through scanning electron microscopy (SEM), Fourier transformed infrared (FTIR) and nuclear magnetic resonance (1H NMR and 13C NMR) spectroscopy. Wetting ability and thermal degradation analysis (TGA) of the samples were also studied. Subsequently, these PUs were examined as potential drug delivery systems using Gabapentin as a model drug, which was loaded in the polymer matrix using the solvent evaporation method. The drug release studies were carried out in 0.06 N HCl as a release medium according to the method outlined in the United States Pharmacopeia. The maximum drug release was observed for sample PU-P1, which was found to be 53.0 % after 6 h. Moreover, a comparison of different PU samples revealed a trend wherein the values of drug release were decreased with an increase in the PEG content.

Functionalisation of lignin with urethane linkages and their strengthening effect on PLA composites

Lignin was functionalised by crosslinking with hexamethylene diisocyanate (HDI) through the heterogenous reaction in the solvent dimethyl sulfoxide for preferential improvement in the mechanical properties of composites. The successful synthesis of lignin modified with HDI was confirmed by the instrumental analyses, e.g., FTIR, XPS, and FESEM. The incorporation of optimum crosslinked lignin in polylactic acid (PLA) matrix was systematically evaluated on the basis of their thermal stability, mechanical property, glass transition temperature (Tg), water contact angle, water absorption, and water permeability. The results displayed that incorporation of fillers had prominent effects on tensile tear strength, which could improve tensile strength up to 231 % and elongation at break up to 53 % due to the good interface compatibility between PLA and modified lignin. Further, with the inclusion of fillers, PLA composites exhibited higher crystallinity in comparison to neat PLA.

Fabrication and In Vitro Biological Assay of Thermo-Mechanically Tuned Chitosan Reinforced Polyurethane Composites

The progressive trend of utilizing bioactive materials constitutes diverse materials exhibiting biocompatibility. The innovative aspect of this research is the tuning of the thermo-mechanical behavior of polyurethane (PU) composites with improved biocompatibility for vibrant applications. Polycaprolactone (CAPA) Mn = 2000 g-mol-1 was used as a macrodiol, along with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI), to develop prepolymer chains, which were terminated with 1,4 butane diol (BD). The matrix was reinforced with various concentrations of chitosan (1-5 wt %). Two series of PU composites (PUT/PUH) based on aromatic and aliphatic diisocyanate were prepared by varying the hard segment (HS) ratio from 5 to 30 (wt %). The Fourier-transformed infrared (FTIR) spectroscopy showed the absence of an NCO peak at 1730 cm-1 in order to confirm polymer chain termination. Thermal gravimetric analysis (TGA) showed optimum weight loss up to 500 °C. Dynamic mechanical analysis (DMA) showed the complex modulus (E*) ≥ 200 MPa. The scanning electron microscope (SEM) proved the ordered structure and uniform distribution of chain extender in PU. The hemolytic activities were recorded up to 15.8 ± 1.5% for the PUH series. The optimum values for the inhibition of biofilm formation were recorded as 46.3 ± 1.8% against E. coli and S. aureus (%), which was supported by phase contrast microscopy.

Development of amylopectin based polyurethanes for sustained drug release studies

In this research work, the crosslinked structure of polyurethane has been exploited for sustained drug delivery. Polyurethane composites have been prepared by the reaction of isophorone diisocyanate (IPDI) and polycaprolactone diol (PCL), which were further extended by varying the mole ratios of amylopectin (AMP) and 1,4-butane diol (1,4-BDO) chain extenders. The progress and completion of the reaction of polyurethane (PU) were confirmed using Fourier Transform infrared (FTIR) and nuclear magnetic resonance (¹H NMR) spectroscopic techniques. Gel permeation chromatography (GPC) analysis showed that the molecular weights of prepared polymers were increased with the addition of amylopectin into the PU matrix. The molecular weight of AS-4 (M_w ≈ 99,367) was found threefold as compared to amylopectin-free PU (M_w ≈ 37,968). Thermal degradation analysis was done using thermal gravimetric analysis (TGA) and inferred that AS-5 showed stability up to 600 °C which was the maximum among all PUs because AMP has a large number of -OH units for linking with prepolymer resulting in a more cross-linked structure which improved the thermal stability of the AS-5 sample. The samples prepared with AMP showed less drug release (<53 %) as compared to the PU sample prepared without AMP (AS-1).

Silica nanoparticles loaded with caffeic acid to optimize the performance of cassava starch/sodium carboxymethyl cellulose film for meat packaging

Cassava starch/sodium carboxymethyl cellulose (CC) was used as the substrate to create a multipurpose food packaging film, and caffeic acid@silica nanoparticles (C@SNPs) was added. The encapsulation rate of caffeic acid in C@SNPs was 84.7 ± 0.97 %. According to SEM pictures, the nanoparticles were evenly dispersed throughout the film and exhibited good compatibility with the other polymers. C@SNPs was added, which enhanced the physical characteristics of film and decreased its water solubility. The best mechanical and oxygen barrier qualities among them are found in the C@SCC_5:1 film, whose tensile strength rises from 7.17 MPa to 15.44 MPa. The C@SCC_5:1 film has scavenging rates of 95.43 % and 84.67 % against ABTS and DPPH free radicals, respectively, and CA can be released continuously in various food systems. In addition, the antibacterial rate of E. coli O157:H7 and S. aureus of C@SCC_5:1 film in meat was 99.9 %, and it can effectively delay lipid oxidation and pH rise. In conclusion,C@SCC_5:1 film is a new type of antibacterial and antioxidant food packaging material.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

Biocompatibility and Hemolytic Activity Studies of Synthesized Alginate-Based Polyurethanes

Many investigators have focused on the development of biocompatible polyurethanes by chemical reaction of functional groups contained in a spacer and introduced in the PU backbone or by a grafting method on graft polymerization of functional groups. In this study, alginate-based polyurethane (PU) composites were synthesized via step-growth polymerization by the reaction of hydroxyl-terminated polybutadiene (HTPB) and hexamethylene diisocyanate (HMDI). The polymer chains were further extended with blends of 1,4-butanediol (1,4-BDO) and alginate (ALG) with different mole ratios. The structures of the prepared PU samples were elucidated with FTIR and 1H NMR spectroscopy. The crystallinity of the prepared samples was evaluated with the help of X-ray diffraction (XRD). The XRD results reveal that the crystallinity of the PU samples increases when the concentration of alginate increases. Thermogravimetric (TGA) results show that samples containing a higher amount of alginate possess higher thermal stability. ALG-based PU composite samples show more biocompatibility and less hemolytic activity. Mechanical properties, contact angle, and water absorption (%) were also greatly affected.

Novel Three-Dimensional-Printing Strategy Based on Dynamic Urea Bonds for Isotropy and Mechanical Robustness of Large-Scale Printed Products

Additive manufacturing via fused deposition modeling (FDM) has become one of the most widely used technologies owing to its ease of operation and effective cost. However, the disappointing interlayer adhesion produced by FDM often results in inferior mechanical properties, which has become a technical bottleneck for industrial production. Herein, we demonstrate a facile and efficient printing strategy to enhance interlayer adhesion by introducing a self-healing mechanism into the printing material, thereby concurrently enhancing the mechanical properties and isotropy of the printed products. This strategy relies on the self-healing property of three-dimensional-printing materials. This self-healing property is endowed by introducing dynamic urea bonds on the thermoplastic polyurethane (TPU) molecular chains, and then, such dynamic bonds can be activated through thermal heating. Accordingly, the synthesized TPU reveals an efficient self-healing property and excellent printability owing to the existence of dynamic reversible covalent bonds. Moreover, objects with complex structures can be split and printed and then assembled using this strategy, avoiding the need for supporting structures and realizing the rapid prototyping of large-sized objects. The printing strategy proposed paves a candidate way to overcome the current challenges in obtaining high-quality products via FDM.

Degradability of Polyurethanes and Their Blends with Polylactide, Chitosan and Starch

One of the methods of making traditional polymers more environmentally friendly is to modify them with natural materials or their biodegradable, synthetic equivalents. It was assumed that blends with polylactide (PLA), polysaccharides: chitosan (Ch) and starch (St) of branched polyurethane (PUR) based on synthetic poly([R,S]-3-hydroxybutyrate) (R,S-PHB) would degrade faster in the processes of hydrolysis and oxidation than pure PUR. For the sake of simplicity in the publication, all three modifiers: commercial PLA, Ch created by chemical modification of chitin and St are called bioadditives. The samples were incubated in a hydrolytic and oxidizing environment for 36 weeks and 11 weeks, respectively. The degradation process was assessed by observation of the chemical structure as well as the change in the mass of the samples, their molecular weight, surface morphology and thermal properties. It was found that the PUR samples with the highest amount of R,S-PHB and the lowest amount of polycaprolactone triol (PCL_triol) were degraded the most. Moreover, blending with St had the greatest impact on the susceptibility to degradation of PUR. However, the rate of weight loss of the samples was low, and after 36 weeks of incubation in the hydrolytic solution, it did not exceed 7% by weight. The weight loss of Ch and PLA blends was even smaller. However, a significant reduction in molecular weight, changes in morphology and changes in thermal properties indicated that the degradation of the samples should occur quickly after this time. Therefore, when using these polyurethanes and their blends, it should be taken into account that they should decompose slowly in their initial life. In summary, this process can be modified by changing the amount of R,S-PHB, the degree of cross-linking, and the type and amount of second blend component added (bioadditives).

The Effect of Chitosan on the Chemical Structure, Morphology, and Selected Properties of Polyurethane/Chitosan Composites

Materials science is an interdisciplinary area of studies. This science focuses on the influence of the physico-chemical properties of materials on their application in human everyday lives. The materials’ synthesis should be developed in accordance with sustainable development. Polyurethanes (PUR) represent a significant consumption of plastic in the world. Modification of PUR, e.g., with polysaccharide of natural origin (chitosan, Chit), should have a positive effect on their functional properties and degradability in the natural environment. The basic parameters affecting the scope and direction of changes are the size and quantity of the chitosan particles. The impact assessment of chitosan on the chemical structure, morphology, thermal properties, crystallinity, mechanical properties, flammability, water sorption, adsorption properties, degradability, and biological activity of PUR/Chit composites (without other additives) is discussed in this article. To the best of our knowledge, recent literature does not contain a study discussing the direct impact of the presence of chitosan in the structure of PUR/Chit composite on its properties, regardless of the intended uses. This paper provides an overview of publications, which presents the results of a study on the effect of adding chitosan in polyurethane/chitosan composites without other additives on the properties of polyurethane.