Elucidation of degradation pattern and immobilization of a novel alginate lyase for preparation of alginate oligosaccharides

Characterization of two new alginate lyases from Pseudomonas mendocina E03

Alginate lyases, which degrade alginate into oligosaccharides, have broad applications in biorefinery, biomedical, and industrial fields. The Polysaccharide Lyase Family 7 (PL7) is particularly notable for its alginate lyase activity. In this study, two novel alginate lyases, PmAlg7A and PmAlg7B, from Pseudomonas mendocina E03 were cloned, heterologously expressed, and characterized. PmAlg7B exhibited limited activity toward alginate (0.10 U/mg-protein), while PmAlg7A demonstrated higher activity with a specific activity of 0.76 U/mg-protein. PmAlg7A was identified as an MG-specific alginate lyase, producing oligosaccharides with degrees of polymerization (Dp) ranging from 2 to 5. The enzyme exhibited optimal activity at a temperature of 30 °C and a pH of 8.0, with a Km of 7.94 ± 0.92 mg/ml and a kcat of 1.23 ± 0.06 s-1. Structural comparisons and amino acid sequence alignments indicated a potential role for residue 55 in loop B in modulating the activity of PmAlg7B, which was supported by mutagenesis experiments and molecular dynamics simulations. These findings enhance our understanding of the critical role of loop B in regulating substrate binding in PL7 alginate lyases.

Alginate-Degrading Modes, Oligosaccharide-Yielding Properties, and Potential Applications of a Novel Bacterial Multifunctional Enzyme, Aly16-1

Relatively little is known about enzymes with broad substrate spectra, leading to limited applications and progress. Herein, we elucidate Aly16-1 of Streptomyces sp. strain CB16 as a novel multifunctional member of the eighth polysaccharide lyase (PL8) family, although it shared few sequence identities with the characterized enzymes. The recombinant enzyme rAly16-1 showed lyase activities against several acidic polysaccharides, including many glycosaminoglycan types, xanthan, and alginate. It was mannuronate (M)-preferred, endolytic, and optimal at 50 °C and pH 6.0. The smallest substrate was an ∆M-terminal (∆: unsaturated monosaccharide) trisaccharide, and the minimal product was ∆. In the final alginate digestions by rAly16-1, the fractions larger than disaccharides were ∆G-terminal (G: guluronate), while the disaccharides were mainly ∆M, showing an oligosaccharide-yielding property under the succession law. However, when degrading various oligosaccharides, rAly16-1 continued producing ∆M from the non-reducing end even when the substrates increased their sizes, quite different from the elucidated alginate lyases with variable alginate-degrading modes. Thus, co-determined by its M-preference, Aly16-1 is novel for its ∆M-yielding property in oligosaccharide preparations. Additionally, rAly16-1 can be applied in sequencing unsaturated trisaccharides, whether ∆M- or ∆G-terminal. This study provides novel insights into the characteristics and applications of a multifunctional enzyme within the PL8 family for resource explorations.

Direct Preparation of Alginate Oligosaccharides from Brown Algae by an Algae-Decomposing Alginate Lyase AlyP18 from the Marine Bacterium Pseudoalteromonas agarivorans A3

Alginate oligosaccharides (AOs), derived from alginate degradation, exhibit diverse biological activities and hold significant promise in various fields. The enzymatic preparation of AOs relies on alginate lyases, which offers distinct advantages. In contrast to the conventional use of sodium alginate derived from brown algae as the substrate for the enzymatic preparation of AOs, AO preparation directly from brown algae is more appealing due to its time and energy efficiency. Thus, the identification of potent alginate lyases and cost-effective brown algae substrates is crucial for optimizing AO production. Herein, we identified and characterized an alginate lyase, AlyP18, capable of efficiently decomposing algae, from a marine bacterium Pseudoalteromonas agarivorans A3 based on secretome analysis. AlyP18 is a mesothermal, endo-type and bifunctional alginate lyase with high enzymatic activity. Two brown algae substrates, Laminaria japonica roots and Macrocystis pyrifera, were used for the AO preparation by AlyP18. Upon optimization of AlyP18 hydrolysis parameters, the substrate degradation efficiency and AO production reached 53% and ~32% for L. japonica roots, respectively, and 77% and ~46.5% for M. pyrifera. The generated AOs primarily consisted of dimers to pentamers, with trimers and tetramers being dominant. This study provides an efficient alginate lyase and alternative brown algal feedstock for the bioconversion of high-value AOs from brown algae.

Catalytic properties characterization and degradation mode elucidation of a polyG-specific alginate lyase OUC-FaAly7

Polymerized guluronates (polyG)-specific alginate lyase with lower polymerized mannuronates (polyM)-degrading activity, superior stability, and clear action mode is a powerful biotechnology tool for the preparation of AOSs rich in M blocks. In this study, we expressed and characterized a polyG-specific alginate lyase OUC-FaAly7 from Formosa agariphila KMM3901. OUC-FaAly7 belonging to polysaccharide lyase (PL) family 7 had highest activity (2743.7 ± 20.3 U/μmol) at 45 °C and pH 6.0. Surprisingly, its specific activity against polyG reached 8560.2 ± 76.7 U/μmol, whereas its polyM-degrading activity was nearly 0 within 10 min reaction. Suggesting that OUC-FaAly7 was a strict polyG-specific alginate lyase. Importantly, OUC-FaAly7 showed a wide range of temperature adaptations and remarkable temperature and pH stability. Its relative activity between 20 °C and 45 °C reached >90 % of the maximum activity. The minimum identifiable substrate of OUC-FaAly7 was guluronate tetrasaccharide (G4). Action process and mode showed that it was a novel alginate lyase digesting guluronate hexaose (G6), guluronate heptaose (G7), and polymerized guluronates, with the preferential generation of unsaturated guluronate pentasaccharide (UG5), although which could be further degraded into unsaturated guluronate disaccharide (UG3) and trisaccharide (UG2). This study contributes to illustrating the catalytic properties, substrate recognition, and action mode of novel polyG-specific alginate lyases.

Efficient preparation of alginate oligosaccharides by using alginate lyases and evaluation of the development promoting effects on Brassica napus L. in saline-alkali environment

Enzymatic degradation of alginate for the preparation of alginate oligosaccharides (AOS) is currently receiving significant attention in the field. AOS has been shown to promote crop growth and improve plant resistance to abiotic stresses. In this study, two PL6 family alginate lyases, AlyRmA and AlyRmB, were expressed and characterized. These enzymes demonstrate exceptional activity and stable thermophilicity compared to other known alginate lyases. AlyRmA (8855.34 U/mg) and AlyRmB (7879.44 U/mg) exhibited excellent degradation activity towards sodium alginate even at high temperatures (70 °C). The AlyRmA and AlyRmB were characterized and utilized to efficiently produce AOS. The study investigated the promotional effect of AOS on the growth of Brassica napus L. seedlings in a saline-alkaline environment. The results of this study demonstrate the high activity and thermal stability of AlyRmA and AlyRmB, highlighting their potential in the preparation of AOS. Moreover, the application of AOS prepared by AlyRmB could enhance the resistance of Brassica napus L. to saline-alkali environments, thereby broadening the potential applications of AOS.

Advancements in enzyme immobilization on magnetic nanomaterials: toward sustainable industrial applications

Enzymes are widely used in biofuels, food, and pharmaceuticals. The immobilization of enzymes on solid supports, particularly magnetic nanomaterials, enhances their stability and catalytic activity. Magnetic nanomaterials are chosen for their versatility, large surface area, and superparamagnetic properties, which allow for easy separation and reuse in industrial processes. Researchers focus on the synthesis of appropriate nanomaterials tailored for specific purposes. Immobilization protocols are predefined and adapted to both enzymes and support requirements for optimal efficiency. This review provides a detailed exploration of the application of magnetic nanomaterials in enzyme immobilization protocols. It covers methods, challenges, advantages, and future perspectives, starting with general aspects of magnetic nanomaterials, their synthesis, and applications as matrices for solid enzyme stabilization. The discussion then delves into existing enzymatic immobilization methods on magnetic nanomaterials, highlighting advantages, challenges, and potential applications. Further sections explore the industrial use of various enzymes immobilized on these materials, the development of enzyme-based bioreactors, and prospects for these biocatalysts. In summary, this review provides a concise comparison of the use of magnetic nanomaterials for enzyme stabilization, highlighting potential industrial applications and contributing to manufacturing optimization.

High-Level Extracellular Production of a Trisaccharide-Producing Alginate Lyase AlyC7 in Escherichia coli and Its Agricultural Application

Alginate oligosaccharides (AOS), products of alginate degradation by endotype alginate lyases, possess favorable biological activities and have broad applications. Although many have been reported, alginate lyases with homogeneous AOS products and secretory production by an engineered host are scarce. Herein, the alginate lyase AlyC7 from Vibrio sp. C42 was characterized as a trisaccharide-producing lyase exhibiting high activity and broad substrate specificity. With PelB as the signal peptide and 500 mM glycine as the additive, the extracellular production of AlyC7 in Escherichia coli reached 1122.8 U/mL after 27 h cultivation in Luria-Bertani medium. The yield of trisaccharides from sodium alginate degradation by the produced AlyC7 reached 758.6 mg/g, with a purity of 85.1%. The prepared AOS at 20 μg/mL increased the root length of lettuce, tomato, wheat, and maize by 27.5%, 25.7%, 9.7%, and 11.1%, respectively. This study establishes a robust foundation for the industrial and agricultural applications of AlyC7.

Separation, purification and structural characterization of marine oligosaccharides: A comprehensive and systematic review of chromatographic methods

Marine oligosaccharides have now been applied in a wide range of industry due to various kinds of physiological activities. However, the oligosaccharides with different polymeric degrees (Dps) differed in physiological activities and applicable fields. So it is promising and essential to separate, purify and structurally characterize these oligosaccharides for understanding their structure-function relationship. This review will summarize the lasted developments in the separation, purification and structural characterization of marine oligosaccharides, including the alginate oligosaccharides, carrageenan oligosaccharides, agar oligosaccharides, chitin oligosaccharides and chitosan oligosaccharides, emphasizing the successful examples of methods for separation and purification. Furthermore, an outlook for preparation of functional oligosaccharides in food biotechnology and agriculture fields is also included. This comprehensive review could definitely promote the utilization of marine functional polysaccharides for food and agriculture.

Advances in alginate lyases and the potential application of enzymatic prepared alginate oligosaccharides: A mini review

Alginate is mainly a linear polysaccharide composed of randomly arranged β-D-mannuronic acid and α-L-guluronic acid linked by α, β-(1,4)-glycosidic bonds. Alginate lyases degrade alginate mainly adopting a β-elimination mechanism, breaking the glycosidic bonds between the monomers and forming a double bond between the C4 and C5 sugar rings to produce alginate oligosaccharides consisting of 2-25 monomers, which have various physiological functions. Thus, it can be used for the continuous industrial production of alginate oligosaccharides with a specific degree of polymerization, in accordance with the requirements of green exploitation of marine resources. With the development of structural analysis, the quantity of characterized alginate lyase structures is progressively growing, leading to a concomitant improvement in understanding the catalytic mechanism. Additionally, the use of molecular modification methods including rational design, truncated expression of non-catalytic domains, and recombination of conserved domains can improve the catalytic properties of the original enzyme, enabling researchers to screen out the enzyme with the expected excellent performance with high success rate and less workload. This review presents the latest findings on the catalytic mechanism of alginate lyases and outlines the methods for molecular modifications. Moreover, it explores the connection between the degree of polymerization and the physiological functions of alginate oligosaccharides, providing a reference for enzymatic preparation development and utilization.

A Novel Bifunctional Alginate Lyase and Antioxidant Activity of the Enzymatic Hydrolysates

Alginate lyase Aly448, a potential new member of the polysaccharide lyase (PL) 7 family, which was cloned and identified from the macroalgae-associated bacterial metagenomic library, showed bifunctionality. The molecular docking results revealed that Aly448 has two completely different binding sites for alginate (polyMG), poly-α-l-guluronic acid (polyG), and poly-β-d-mannuronic acid (polyM) substrates, respectively, which might be the molecular basis for the enzyme's bifunctionality. Truncational results confirmed that predicted key residues affected the bifunctionality of Aly448, but did not wholly explain. Besides, Aly448 presented excellent biochemical characteristics, such as higher thermal stability and pH tolerance. Degradation of polyMG, polyM, and polyG substrates by Aly448 produced tetrasaccharide (DP4), disaccharide (DP2), and galactose (DP1), which exhibited excellent antioxidant activity. These findings provide novel insights into the substrate recognition mechanism of bifunctional alginate lyases and pave a new path for the exploitation of natural antioxidant agents.

Identification and characterization of a critical loop for the high activity of alginate lyase VaAly2 from the PL7_5 subfamily

As the major component in the cell wall of brown algae, alginates are degradable by alginate lyases via β-elimination. Alginate lyases can be categorized into various polysaccharide lyase (PL) families, and PL7 family alginate lyases are the largest group and can be divided into six subfamilies. However, the major difference among different PL7 subfamilies is not fully understood. In this work, a marine alginate lyase, VaAly2, from Vibrio alginolyticus ATCC 17749 belonging to the PL7_5 subfamily was identified and characterized. It displayed comparatively high alginolytic activities toward different alginate substrates and functions as a bifunctional lyase. Molecular docking and biochemical analysis suggested that VaAly2 not only contains a key catalyzing motif (HQY) conserved in the PL7 family but also exhibits some specific characters limited in the PL7_5 subfamily members, such as the key residues and a long loop1 structure around the active center. Our work provides insight into a loop structure around the center site which plays an important role in the activity and substrate binding of alginate lyases belonging to the PL7_5 subfamily.

Improving the thermostability of a novel PL-6 family alginate lyase by rational design engineering for industrial preparation of alginate oligosaccharides

Alginate is degraded into alginate oligosaccharides with various biological activities by enzymes. However, the thermostability of the enzyme limits its industrial application. In this study, a novel PL-6 alginate lyase, AlyRm6A from Rhodothermus marinus 4252 was expressed and characterized. In addition, an efficient comprehensive strategy was proposed, including automatic design of heat-resistant mutants, multiple computer-aided ΔΔGfold value calculation, and conservative analysis of mutation sites. AlyRm6A has naturally high thermostability. Compared with the WT, T43I and Q216I kept their original activities, and their half-lives were increased from 3.68 h to 4.29 h and 4.54 h, melting point temperatures increased from 61.5 °C to 62.9 °C and 63.5 °C, respectively. The results of circular dichroism showed that both the mutants and the wild type had the characteristic peaks of β-sheet at 195 nm and 216 nm, which indicated that there was no significant effect on the secondary structure of the protein. Molecular dynamics simulation (MD) analyses suggest that the enhancement of the hydrophobic interaction network, improvement of molecular rigidity, and denser structure could improve the stability of AlyRm6A. To the best of our knowledge, our findings indicate that AlyRm6A mutants exhibit the highest thermostability among the characterized PL-6 alginate lyases, making them potential candidates for industrial production of alginate oligosaccharides.

A Novel Cold-Adapted and High-Alkaline Alginate Lyase with Potential for Alginate Oligosaccharides Preparation

Alginate oligosaccharides (AOs) prepared through enzymatic reaction by diverse alginate lyases under relatively controllable and moderate conditions possess versatile biological activities. But widely used commercial alginate lyases are still rather rare due to their poor properties (e.g., lower activity, worse thermostability, ion tolerance, etc.). In this work, the alginate lyase Alyw208, derived from Vibrio sp. W2, was expressed in Yarrowia lipolytica of food grade and characterized in order to obtain an enzyme with excellent properties adapted to industrial requirements. Alyw208 classified into the polysaccharide lyase (PL) 7 family showed maximum activity at 35 °C and pH 10.0, indicating its cold-adapted and high-alkaline properties. Furthermore, Alyw208 preserved over 70% of the relative activity within the range of 10-55 °C, with a broader temperature range for the activity compared to other alginate-degrading enzymes with cold adaptation. Recombinant Alyw208 was significantly activated with 1.5 M NaCl to around 2.1 times relative activity. In addition, the endolytic Alyw208 was polyG-preferred, but identified as a bifunctional alginate lyase that could degrade both polyM and polyG effectively, releasing AOs with degrees of polymerization (DPs) of 2-6 and alginate monomers as the final products (that is, DPs 1-6). Alyw208 has been suggested with favorable properties to be a potent candidate for biotechnological and industrial applications.

Directed preparation, structure-activity relationship and applications of alginate oligosaccharides with specific structures: A systematic review

The alginate oligosaccharides (AOS) possess versatile activities (such as antioxidant, anti-inflammatory, antitumor, and immune-regulatory activities) and have been the research topic in marine bioresource utilization fields. The degree of polymerization (DP) and the β-D-mannuronic acid (M)/α-L-guluronic acid (G)-units ratio strongly affect the functionality of AOS. Therefore, directed preparation of AOS with specific structures is essential for expanding the applications of alginate polysaccharides and has been the research topic in the marine bioresource field. Alginate lyases could efficiently degrade alginate and specifically produce AOS with specific structures. Therefore, enzymatic preparation of AOS with specific structures has drawn increasing attention. Herein, we systematically summarized the current research progress on the structure-function relation of AOS and focuses on the application of the enzymatic properties of alginate lyase to the specific preparation of various types of AOS. At the same time, current challenges and opportunities for AOS applications are presented to guide and improve the preparation and application of AOS in the future.

Efficient Degradation of Alginate and Preparation of Alginate Oligosaccharides by a Novel Biofunctional Alginate Lyase with High Activity and Excellent Thermophilic Features

The enzymatic degradation of seaweed polysaccharides is gaining interest for its potential in the production of functional oligosaccharides and fermentable sugars. Herein, a novel alginate lyase, AlyRm3, was cloned from a marine strain, Rhodothermus marinus DSM 4252. The AlyRm3 showed optimal activity (37,315.08 U/mg) at 70 °C and pH 8.0, with the sodium alginate used as a substrate. Noticeably, AlyRm3 was stable at 65 °C and also exhibited 30% of maximal activity at 90 °C. These results indicated that AlyRm3 is a thermophilic alginate lyase that efficiently degrades alginate at high industrial temperatures (>60 °C). The FPLC and ESI−MS analyses suggested that AlyRm3 primarily released disaccharides and trisaccharides from the alginate, polyM, and polyG in an endolytic manner. In the saccharification process of sodium alginate (0.5%, w/v), the AlyRm3 yielded numerous reducing sugars (1.73 g/L) after 2 h of reaction. These results indicated that AlyRm3 has a high enzymatic capacity for saccharifying the alginate, and could be used to saccharify the alginate biomass before the main fermentation process for biofuels. These properties make AlyRm3 a valuable candidate for both fundamental research and industrial applications.

A novel alginate lyase and its domain functions for the preparation of unsaturated monosaccharides

Brown algae are considered promising crops for the production of sustainable biofuels. However, the commercial application has been limited by lack of efficient methods for converting alginate into fermentable sugars. Herein, we cloned and characterized a novel alginate lyase AlyPL17 from Pedobacter hainanensis NJ-02. It possessed outstanding catalytic efficiency toward polymannuronic acid (polyM), polyguluronic acid (polyG), and alginate sodium, with k_cat of 39.42 ± 1.9 s^-1, 32.53 ± 0.88 s^-1, and 38.30 ± 2.12 s^-1, respectively. AlyPL17 showed maximum activity at 45 °C and pH 9.0. The domain truncation did not change the optimal temperature and optimal pH, but greatly reduced the activity. In addition, AlyPL17 degrades alginate through the cooperative action of two structural domains in an exolytic mode. The minimal degradation substrate of AlyPL17 is a disaccharide. Furthermore, AlyPL17 and AlyPL6 can synergistically degrade alginate to prepare unsaturated monosaccharides that can be converted to 4-deoxy-L-erythron-5-hexoseuloseuronate acid (DEH). DEH is reduced to KDG by DEH reductase (Sdr), which enters the Entner-Doudoroff (ED) pathway as a common metabolite and is converted to bioethanol. KEY POINTS: • Biochemical characterization of alginate lyase from Pedobacter hainanensis NJ-02 and its truncated form. • Degradation patterns of AlyPL17 and the role of its domains in product distribution and mode of action. • Potential of synergistic degradation system for efficient preparation of unsaturated monosaccharides.

Cloning, Expression and Characterization of an Alginate Lyase in Bacillus subtilis WB600

The aim of this study was to further broaden the heterologous expression of alginate lyase from Vibrio alginolyticus in a Bacillus subtilis expression vector. A B. subtilis WB600/pP43NMK-alg62 strain was constructed. (NH4)2SO4 precipitation and Ni-affinity chromatography were performed to purify the enzyme. We then characterized the enzyme. Its molecular weight was 57.64 kDa, and it worked optimally at 30 °C with a pH of 8.0. Ca2+ markedly enhanced the enzymatic activity of Alg62 while Cu2+ and Ni2+ inhibited its activity. Alg62 had a wide range of substrate specificity, showing high activity toward sodium alginate and polyG. Following optimization of the fermentation process, the optimal conditions for the recombinant expression of Alg62 were as follows: temperature of 37 °C, pH of 7.0, medium consisting of glycerol 15 g/L, yeast powder 25 g/L and K+ 1.5 mmol/L. At these optimal conditions, enzyme activity reached 318.21 U/mL, which was 1.54 times higher than the initial enzyme activity.

Characterization of degradation patterns and enzymatic properties of a novel alkali-resistant alginate lyase AlyRm1 from Rubrivirga marina

Alginate lyase is essential for the production of alginate oligosaccharides (AOSs), which exhibit diverse bioactivities and have numerous applications in the food and pharmaceutical industries. The creation of recombinant alginate lyase by genetic engineering lays a crucial foundation for the commercialization of alginate lyase. This study cloned and expressed the polysaccharide lyase family 6 (PL6) alginate lyase gene alyrm1 from Rubrivirga marina.The optimum temperature and pH for recombinant AlyRm1 are 30 °C and 10.0, respectively. AlyRm1 shows good alkaline stability, for it remained over 80% of the enzyme activity after being incubated at pH 10.0 for 24 h AlyRm1 preferentially degrades PolyM into AOSs with degrees of polymerization (DP) 2-5 and monosaccharides as an endolytic bifunctional lyase. In addition, the analysis of degradation products toward oligosaccharides revealed that the minimal substrate of AlyRm1 is trisaccharide and clarified the degradation patterns.

Characterization of a Novel Alginate Lyase with Two Alginate Lyase Domains from the Marine Bacterium Vibrio sp. C42

Alginate is abundant in the cell walls of brown algae. Alginate lyases can degrade alginate, and thus play an important role in the marine carbon cycle and industrial production. Currently, most reported alginate lyases contain only one functional alginate lyase domain. AlyC8 is a putative alginate lyase with two alginate lyase domains (CD1 and CD2) from the marine alginate-degrading strain Vibrio sp. C42. To characterize AlyC8 and its two catalytic domains, AlyC8 and its two catalytic domain-deleted mutants, AlyC8-CD1 and AlyC8-CD2, were expressed in Escherichia coli. All three proteins have noticeable activity toward sodium alginate and exhibit optimal activities at pH 8.0-9.0 and at 30-40 °C, demonstrating that both CD1 and CD2 are functional. However, CD1 and CD2 showed opposite substrate specificity. The differences in substrate specificity and degradation products of alginate between the mutants and AlyC8 demonstrate that CD1 and CD2 can act synergistically to enable AlyC8 to degrade various alginate substrates into smaller oligomeric products. Moreover, kinetic analysis indicated that AlyC8-CD1 plays a major role in the degradation of alginate by AlyC8. These results demonstrate that AlyC8 is a novel alginate lyase with two functional catalytic domains that are synergistic in alginate degradation, which is helpful for a better understanding of alginate lyases and alginate degradation.

Cloning, expression, and characterization of a novel endo-type alginate lyase from Microbulbifer sp. BY17

BACKGROUND

Alginate oligosaccharides (AOS), with various physiological effects, have been widely used in the food, agricultural, and pharmaceutical industries. The biological enzymatic method of preparing AOS, using alginate lyase, has more advantages compared with physical and chemical methods. Cloning and heterologously expressing alginate lyase are therefore very important.

RESULTS

A novel alginate lyase, BY17PV7, from Microbulbifer sp. BY17, isolated from Gracilaria, was cloned and expressed in Escherichia coli BL21(DE3). BY17PV7 was about 27 KDa. BY17PV7 showed the greatest activity (150.42 ± 3.32 U/mg) at 43 °C and pH 8.9. It could be activated by Ca²⁺ , Mn²⁺ , Co²⁺ , Fe³⁺ , Na⁺ , and inhibited by Mg²⁺ , Zn²⁺ , Ba²⁺ , Cu²⁺ , sodium dodecyl sulfate (SDS), ethylene diamine tetraacetic acid (EDTA). BY17PV7 had a wide range of substrate specificity and good degradation effects for poly β-D-mannuronate (polyM) and poly α-L-guluronate (polyG), demonstrating that it is a bifunctional alginate lyase. The kinetic parameters showed that BY17PV7 had a greater affinity for polyG. BY17PV7 released AOS with a degree of polymerization (DP) of 3-4 in an endolytic manner from sodium alginate. Alginate oligosaccharides showed strong antioxidant ability of reducing Fe³⁺ and scavenging radicals such as hydroxyl, 2,2-azion-bia (3-ethylbenzo-thiazoline-6-sulfonic acid diammonium salt) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH).

CONCLUSION

A novel bifunctional alginate lyase, BY17PV7, was expressed and characterized in Escherichia coli BL21(DE3). The results were helpful for the analysis of the molecular mechanisms of degrading patterns in the polysaccharide lyase (PL) family. © 2022 Society of Chemical Industry.

Prebiotic potential of enzymatically produced ulvan oligosaccharides using ulvan lyase of Bacillus subtilis, NIOA181, a macroalgae-associated bacteria

AIMS

To characterize the polysaccharide hydrolyzing potential of macroalgae-associated bacteria (MABs) for enzymatic production of oligosaccharides and determining their prebiotic potential.

METHODS AND RESULTS

Approximately 400 MABs were qualitatively characterised for polysaccharide hydrolyzing activity. Only about 5 to 15% of the isolates were found to have the potential for producing porphyranase, alginate lyase and ulvan lyase enzymes which were quantified in specific substrate broths. One potential MAB, Bacillus subtilis, NIOA181, isolated from green macroalgae, showed the highest ulvan lyase activity. This enzyme was partially purified and used to hydrolyse ulvan into ulvan oligosaccharides. Structural characterization of ulvan oligosaccharides showed that they are predominantly composed of di-, tri-, and tetrasaccharide units. Results showed that the enzymatically produced ulvan oligosaccharides exhibited prebiotic activity by promoting the growth of probiotic bacteria and suppressing the enteric pathogens, which were higher than the ulvan polysaccharide and equivalent to commercial fructooligosaccharides.

CONCLUSIONS

A potential MAB, NIOA181, producing ulvan lyase was isolated and used for the production of ulvan oligosaccharides with prebiotic activity.

SIGNIFICANCE AND IMPACT OF STUDY

Rarely studied ulvan oligosaccharides with prebiotic activity can be widely used as an active pharmaceutical ingredient in nutraceutical and other healthcare applications.

Cloning and Characterization of a Novel Endo-Type Metal-Independent Alginate Lyase from the Marine Bacteria Vibrio sp. Ni1

The applications of alginate lyase are diverse, but efficient commercial enzymes are still unavailable. In this study, a novel alginate lyase with high activity was obtained from the marine bacteria Vibrio sp. Ni1. The ORF of the algB gene has 1824 bp, encoding 607 amino acids. Homology analysis shows that AlgB belongs to the PL7 family. There are two catalytic domains with the typical region of QIH found in AlgB. The purified recombinant enzyme of AlgB shows highest activity at 35 °C, pH 8.0, and 50 mmol/L Tris-HCl without any metal ions. Only K⁺ slightly enhances the activity, while Fe²⁺ and Cu²⁺ strongly inhibit the activity. The AlgB preferred polyM as substrate. The end products of enzymatic mixture are DP2 and DP3, without any metal ion to assist them. This enzyme has good industrial application prospects.

Alginate oligosaccharides: The structure-function relationships and the directional preparation for application

Alginate oligosaccharides (AOS) are degradation products of alginate extracted from brown algae. With low molecular weight, high water solubility, and good biological activity, AOS present anti-inflammatory, antimicrobial, antioxidant, and antitumor properties. They also exert growth-promoting effects in animals and plants. Three types of AOS, mannuronate oligosaccharides (MAOS), guluronate oligosaccharides (GAOS), and heterozygous mannuronate and guluronate oligosaccharides (HAOS), can be produced from alginate by enzymatic hydrolysis. Thus far, most studies on the applications and biological activities of AOS have been based mainly on a hybrid form of HAOS. To improve the directional production of AOS for practical applications, systematic studies on the structures and related biological activities of AOS are needed. This review provides a summary of current understanding of structure-function relationships and advances in the production of AOS. The current challenges and opportunities in the application of AOS is suggested to guide the precise application of AOS in practice.

Evolving strategies for marine enzyme engineering: recent advances on the molecular modification of alginate lyase

Alginate, an acidic polysaccharide, is formed by β-d-mannuronate (M) and α-l-guluronate (G). As a type of polysaccharide lyase, alginate lyase can efficiently degrade alginate into alginate oligosaccharides, having potential applications in the food, medicine, and agriculture fields. However, the application of alginate lyase has been limited due to its low catalytic efficiency and poor temperature stability. In recent years, various structural features of alginate lyase have been determined, resulting in modification strategies that can increase the applicability of alginate lyase, making it important to summarize and discuss the current evidence. In this review, we summarized the structural features and catalytic mechanisms of alginate lyase. Molecular modification strategies, such as rational design, directed evolution, conserved domain recombination, and non-catalytic domain truncation, are also described in detail. Lastly, the application of alginate lyase is discussed. This comprehensive summary can inform future applications of alginate lyases.

Cloning and Characterization of a Novel Alginate Lyase from Paenibacillus sp. LJ-23

As a low molecular weight alginate, alginate oligosaccharides (AOS) exhibit improved water solubility, better bioavailability, and comprehensive health benefits. In addition, their biocompatibility, biodegradability, non-toxicity, non-immunogenicity, and gelling capability make them an excellent biomaterial with a dual curative effect when applied in a drug delivery system. In this paper, a novel alginate lyase, Algpt, was cloned and characterized from a marine bacterium, Paenibacillus sp. LJ-23. The purified enzyme was composed of 387 amino acid residues, and had a molecular weight of 42.8 kDa. The optimal pH of Algpt was 7.0 and the optimal temperature was 45 °C. The analysis of the conserved domain and the prediction of the three-dimensional structure indicated that Algpt was a novel alginate lyase. The dominant degradation products of Algpt on alginate were AOS dimer to octamer, depending on the incubation time, which demonstrated that Algpt degraded alginate in an endolytic manner. In addition, Algpt was a salt-independent and thermo-tolerant alginate lyase. Its high stability and wide adaptability endow Algpt with great application potential for the efficient preparation of AOS with different sizes and AOS-based products.

Elucidating the degradation pattern of a new cold-tolerant pectate lyase used for efficient preparation of pectin oligosaccharides

The cold-active pectate lyases have drawn increasing attention in food and biotechnological applications due to their ability to retain high catalytic efficiency under lower temperatures, which could be helpful for energy saving, cost reduction and flavor preservation. Herein, a new cold-tolerant pectate lyase (ErPelPL1) gene from Echinicola rosea was cloned and heterologously expressed in Escherichia coli. Interestingly, ErPelPL1 retained high catalytic activity even at a low temperature (4 °C). ErPelPL1 exhibited optimal activity at 35 ℃, pH 8.0 with 1 mM of Ca2+. It showed high specific activity towards polygalacturonic acid (34.7 U/mg) and sodium polygalacturonate (59.3 U/mg). The combined thin-layer chromatography (TLC), fast protein liquid chromatography (FPLC) and electrospray ionization mass spectrometry (ESI-MS) results indicated that ErPelPL1 endolytically degraded pectic substances into the oligosaccharides with degrees of depolymerization (Dps) of 1-6. In conclusion, this study mainly conducted biochemical characterization and product analysis of a cold-tolerant pectate lyase. Therefore, it provides a promising enzyme candidate for food and biotechnological applications.

Structure Characteristics, Biochemical Properties, and Pharmaceutical Applications of Alginate Lyases

Alginate, the most abundant polysaccharides of brown algae, consists of various proportions of uronic acid epimers α-L-guluronic acid (G) and β-D-mannuronic acid (M). Alginate oligosaccharides (AOs), the degradation products of alginates, exhibit excellent bioactivities and a great potential for broad applications in pharmaceutical fields. Alginate lyases can degrade alginate to functional AOs with unsaturated bonds or monosaccharides, which can facilitate the biorefinery of brown algae. On account of the increasing applications of AOs and biorefinery of brown algae, there is a scientific need to explore the important aspects of alginate lyase, such as catalytic mechanism, structure, and property. This review covers fundamental aspects and recent developments in basic information, structural characteristics, the structure-substrate specificity or catalytic efficiency relationship, property, molecular modification, and applications. To meet the needs of biorefinery systems of a broad array of biochemical products, alginate lyases with special properties, such as salt-activated, wide pH adaptation range, and cold adaptation are outlined. Withal, various challenges in alginate lyase research are traced out, and future directions, specifically on the molecular biology part of alginate lyases, are delineated to further widen the horizon of these exceptional alginate lyases.

Secretory Expression of an Alkaline Alginate Lyase With Heat Recovery Property in Yarrowia lipolytica

Alginate lyase possesses wide application prospects for the degradation of brown algae and preparation of alginate oligosaccharides, and its degradation products display a variety of biological activities. Although many enzymes of this type have been reported, alginate lyases with unique properties are still relatively rare. In the present work, an alginate lyase abbreviated as Alyw203 has been cloned from Vibrio sp. W2 and expressed in food-grade Yarrowia lipolytica. The Alyw203 gene consists of an open reading frame (ORF) of 1,566 bp containing 521 amino acids, of which the first 17 amino acids are considered signal peptides, corresponding to secretory features. The peak activity of the current enzyme appears at 45°C with a molecular weight of approximately 57.0 kDa. Interestingly, Alyw203 exhibits unique heat recovery performance, returning above 90% of its initial activity in the subsequent incubation for 20 min at 10°C, which is conducive to the recovery of current enzymes at low-temperature conditions. Meanwhile, the highest activity is obtained under alkaline conditions of pH 10.0, showing outstanding pH stability. Additionally, as an alginate lyase independent of NaCl and resistant to metal ions, Alyw203 is highly active in various ionic environments. Moreover, the hydrolyzates of present enzymes are mainly concentrated in the oligosaccharides of DP1–DP2, displaying perfect product specificity. The alkali suitability, heat recovery performance, and high oligosaccharide yield of Alyw203 make it a potential candidate for industrial production of the monosaccharide and disaccharide.

Alginate degrading enzymes: an updated comprehensive review of the structure, catalytic mechanism, modification method and applications of alginate lyases

Alginate, a kind of linear acidic polysaccharide, consists of α-L-guluronate (G) and β-D-mannuronate (M). Both alginate and its degradation products (alginate oligosaccharides) possess abundant biological activities such as antioxidant activity, antitumor activity, and antimicrobial activity. Therefore, alginate and alginate oligosaccharides have great value in food, pharmaceutical, and agricultural fields. Alginate lyase can degrade alginate into alginate oligosaccharides via the β-elimination reaction. It plays an important role in marine carbon recycling and the deep utilization of brown algae. Elucidating the structural features of alginate lyase can improve our knowledge of its catalytic mechanisms. With the development of structural analysis techniques, increasing numbers of alginate lyases have been characterized at the structural level. Hence, it is essential and helpful to summarize and discuss the up-to-date findings. In this review, we have summarized progress on the structural features and the catalytic mechanisms of alginate lyases. Furthermore, the molecular modification strategies and the applications of alginate lyases have also been discussed. This comprehensive information should be helpful to expand the applications of alginate lyases.

Structural insights into the substrate-binding cleft of AlyF reveal the first long-chain alginate-binding mode

The products of alginate degradation, alginate oligosaccharides (AOS), have potential applications in many areas, including functional foods and marine drugs. Enzyme-based approaches using alginate lyases have advantages in the preparation of well defined AOS and have attracted much attention in recent years. However, a lack of structural insight into the whole substrate-binding cleft for most known alginate lyases severely hampers their application in the industrial generation of well defined AOS. To solve this issue, AlyF was co-crystallized with the long alginate oligosaccharide G6 (L-hexaguluronic acid hexasodium salt), which is the longest bound substrate in all solved alginate lyase complex structures. AlyF formed interactions with G6 from subsites -3 to +3 without additional substrate-binding site interactions, suggesting that the substrate-binding cleft of AlyF was fully occupied by six sugars, which was further confirmed by isothermal titration calorimetry and differential scanning calorimetry analyses. More importantly, a combination of structural comparisons and mutagenetic analyses determined that three key loops (loop 1, Lys215-Glu236; loop 2, Gln402-Ile416; loop 3, Arg334-Gly348) mainly function in binding long substrates (degree of polymerization of >4). The potential flexibility of loop 1 and loop 2 might enable the substrate to continue to enter the cleft after binding to subsites +1 to +3; loop 3 stabilizes and orients the substrate at subsites -2 and -3. Taken together, these results provide the first possible alginate lyase-substrate binding profile for long-chain alginates, facilitating the rational design of new enzymes for industrial purposes.

Characterization of a novel PL 17 family alginate lyase with exolytic and endolytic cleavage activity from marine bacterium Microbulbifer sp. SH-1

Alginate lyases are essential tools for depolymerizing alginate into bioactive oligosaccharides and fermentable monosaccharides. Herein, we characterized a novel polysaccharide lyase AlgSH17 from marine bacterium Microbulbifer sp. SH-1. The recombinant enzyme exhibited the maximum activity at 30 °C, pH 7.0 and retained 86.20% and 65.43% of its maximum activity at 20 °C and 15 °C, respectively, indicating that AlgSH17 has an excellent cold-adapted property. The final products of AlgSH17 mainly consisted of monosaccharides with small amounts of oligosaccharides with degrees of polymerization (DP) 2-6, suggesting that AlgSH17 possesses both exolytic and endolytic activity. Degradation pattern analysis indicated that AlgSH17 could degrade DP ≥ 4 oligosaccharides into disaccharides and trisaccharides by cleaving the endo-glycosidic bonds and further digest disaccharides and trisaccharides into monosaccharides in an exolytic manner. Products distribution and molecular docking analysis revealed that AlgSH17 could cleave the glycosidic bonds between -1 and +2 within the substrate. Furthermore, The ABTS⁺, hydroxyl and DPPH radicals scavenging activity of the enzymatic hydrolysates prepared by AlgSH17 reached up to 91.53%, 81.23% and 61.06%, respectively, and the enzymatic hydrolysates displayed an excellent preservation effect on fresh-cut apples. The above results suggested that AlgSH17 could be utilized for the production of monosaccharides, antioxidants and food additives.

Characteristics and applications of alginate lyases: A review

Brown algae, as the main source of alginate, are a type of marine biomass with a very high output. Alginate, a polysaccharide composed of β-D-mannuronic acid (M) and α-L-guluronic acid (G), has great potential for applications in the food, cosmetic and pharmaceutical industries. Alginate lyases (Alys) can degrade alginate polymers into oligosaccharides or monosaccharides, resulting in a broad application field. Alys can be used for both the production of alginate oligosaccharides and the biorefinery of brown algae. In view of their important functions, an increasing number of Alys have been isolated and characterized. For better application, a comprehensive understanding of Alys is essential. Therefore, in this paper, we summarized recently discovered Alys, discussed their characteristics, and introduced their structural properties, degradation patterns and biological roles in alginate-degrading organisms. In addition, applications of Alys have been illustrated with examples. This paper provides a relatively comprehensive description of Alys, which is significant for Alys exploration and application.

Hydrolyzing Laminaria japonica with a combination of microbial alginate lyase and cellulase

A novel seaweed-hydrolyzing strain designated as Pseudoalteromonas sp. Alg6B was isolated from the surface of brown seaweed (Laminaria japonica). The activity of crude alginate lyase produced by Alg6B was 54.5 U/ml and the main products of hydrolyzing alginate were disaccharide and tetrasaccharide. The hydrolysis rate of seaweed reached up to 97% after combining 3% (v/v) Alg6B and 0.2% (w/v) solid cellulase. In kelp hydrolysate, the contents of nutrients are much more than raw seaweed. Alg6B grows quickly and has the ability of producing alginate oligosaccharides with low molecular weight (MW) (≤2 kDa). Furthermore, this study demonstrates that a combination of microbial alginate lyase and cellulase could almost hydrolyze seaweed completely. This research indicated that Alg6B could provide a feasible pathway to produce alginate oligosaccharides (AOS), and the synergistic effect of alginate lyase and cellulase on seaweed bioconversion can potentially pave the way to the sustainable production of seaweed fertilizer.

Purification and Characterization of a Novel Endolytic Alginate Lyase from Microbulbifer sp. SH-1 and Its Agricultural Application

Alginate, an important acidic polysaccharide in marine multicellular algae, has attracted attention as a promising biomass resource for the production of medical and agricultural chemicals. Alginate lyase is critical for saccharification and utilization of alginate. Discovering appropriate and efficient enzymes for depolymerizing alginate into fermentable fractions plays a vital role in alginate commercial exploitation. Herein, a unique alginate lyase, AlgSH7, belonging to polysaccharide lyase 7 family is purified and characterized from an alginate-utilizing bacterium Microbulbifer sp. SH-1. The purified AlgSH7 shows a specific activity of 12,908.26 U/mg, and its molecular weight is approximately 66.4 kDa. The optimal temperature and pH of AlgSH7 are 40 °C and pH 9.0, respectively. The enzyme exhibits stability at temperatures below 30 °C and within an extensive pH range of 5.0-9.0. Metal ions including Na⁺, K⁺, Al³⁺, and Fe³⁺ considerably enhance the activity of the enzyme. AlgSH7 displays a preference for poly-mannuronic acid (polyM) and a very low activity towards poly-guluronic acid (polyG). TLC and ESI-MS analysis indicated that the enzymatic hydrolysates mainly include disaccharides, trisaccharides, and tetrasaccharides. Noteworthy, the alginate oligosaccharides (AOS) prepared by AlgSH7 have an eliciting activity against chilling stress in Chinese flowering cabbage (Brassica parachinensis L.). These results suggest that AlgSH7 has a great potential to design an effective process for the production of alginate oligomers for agricultural applications.