Preparation, characterization, physicochemical property and potential application of porous starch: A review

Facile Synthesis of Multifunctional Mesoporous Starch-Based Microparticle for Effective Hemostasis and Wound Healing

Uncontrolled hemorrhage and infection are the principal causes of mortality associated with trauma in both military and civilian medical settings. Modified starch granules have emerged as a safe hemostatic agent for irregular and noncompressible wounds, but their performance is constrained by limited hemostasis efficiency and modest antibacterial activity. This study reported a directed self-assembly approach for a multifunctional mesoporous starch-based microparticle loaded with chitosan and calcium ions (Ca@MSMP) used for rapid hemostasis and wound healing. Directed self-assembly of uniform Ca@MSMP with a hierarchical hollow structure in the presence of chitosan was confirmed by scanning electron microscopy (SEM) analysis and pore structure analysis. The resulting Ca@MSMP exhibited a well-defined spherical shape and uniform size of 1 μm and demonstrated excellent antibacterial activity (>95%) without hemolytic activity. Importantly, Ca@MSMP enhanced blood coagulation and platelet aggregation via the synergistic effect of rapid calcium release and chitosan-mediated electrostatic interactions, leading to a significant decrease in blood loss and reduction in hemostasis time in rat tail amputation and liver injury models. In comparative analyses, Ca@MSMP significantly outperformed the commercial hemostatic agent Quickclean, notably enhancing the healing of full-thickness skin wounds in vivo by effectively preventing infection. These results underscore the potential of this innovative hemostatic material in diverse clinical scenarios, offering effective solutions for the management of bleeding in wounds that are irregularly shaped and noncompressible.

Effect of different drying methods on the structure and properties of porous starch

In order to investigate the effects of different drying methods on the properties of porous starch. The present study used four drying methods, namely hot air drying (HD), spray drying (SPD), vacuum freeze drying (FD) and supercritical carbon dioxide drying (SCD) to prepare maize and kudzu porous starch. Findings indicated that the physicochemical properties (e.g., morphology, crystallinity, enthalpy value, porosity, surface area and water absorption capacity as well as dye absorption capacity, particle size) of porous starch were significantly affected by the drying method. Compared with other samples, SCD-treated porous starch exhibited the highest surface areas of the starch (2.943 and 3.139 m2/g corresponding to kudzu and maize, respectively), amylose content (22.02 % and 16.85 % corresponding to kudzu and maize, respectively), MB and NR absorption capacity (90.63 %, 100.26 % and 90.63 %, 100.26 %, corresponding to kudzu ad maize, respectively), and thermal stability, whereas HD-treated porous starch showed the highest water-absorption capacity (123.8 % and 131.31 % corresponding to kudzu and maize, respectively). The dye absorption of the maize and kudzu porous starch was positively correlated with surface area, according to Pearson's correlation analysis. Therefore, in this study, our aim was to explore the effects of different drying methods on the Structure and properties of porous starch, and provide reference for selecting the best drying method for its application in different fields.

The art and science of porous starch: understanding the preparation method and structure-function relationship

Porous starch (PS), a modified form of starch with unique properties, is attracting substantial attention for its diverse advantages and applications. Its intricate porous structure, crystalline and amorphous characteristics, and hydrophilic-hydrophobic properties stem from pore formation via physical, chemical, enzymatic, and combined synergistic methods. Porous starch offers benefits like improved gelatinization temperature, water absorption, increased surface area, tunable crystallinity, and enhanced functional properties, making it appealing for diverse food industry applications. To optimize its properties, determining the parameters governing porous structure formation is crucial. Factors such as processing conditions, starch source, and modification methods substantially impact porosity and the overall characteristics of the material. Understanding and controlling these parameters allows customization for specific applications, from pharmaceutical drug delivery systems to enhancing texture and moisture retention in food products. To date, studies shedding light on how porosity formation can be fine-tuned for specific applications are fewer. This review critically assesses the existing reports on porous starch, focusing on how preparation methods affect porosity formation, thereby influencing the product's crystallinity/hydrophilic-hydrophobic nature and overall applicability.

Potential use of Thai mango (Mangifera indica Linn. cultivar Chok-Anan) seed porous starch for retention of aroma compounds from coffee extract

This study aimed to extract and modify the properties of the starch from Thai mango seeds (cultivar Chok-Anan). The porous starch samples were obtained using enzymatic treatment and its potential to retain aroma compounds from coffee extract was evaluated. The physicochemical properties, structure characteristics, porosity characteristics and adsorption quantity of starches were also determined. The retention of coffee aroma compounds was investigated through combining starch or porous starch with odorants, and storing the mixtures at room temperature for 7 and 14 days, respectively. The chemical properties of aroma compounds as well as starch surface properties were observed to affect the retention of aroma compounds upon storage. Additionally, 2-furanmethanol, d-limonene and maltol were selected to be the primary target compounds to assess the retention of odorants. This study observed a noticeable decrease in d-limonene content throughout the storage period. On the contrary, after 14 days of storage, the porous starch exhibited high retention of hydroxy compounds including 2-furanmethanol and maltol. However, after prolonged storage their ability to retain 2-furanmethanol and maltol slightly decreased. Therefore, the porous starch derived from mango seeds exhibited the potential to retain coffee aroma compounds and could be a desirable green adsorbent for food and cosmetic industries.

Fabrication and characterization of dual-functional porous starch with both emulsification and antioxidant properties

Starchy materials with good antioxidant, emulsification and adsorption properties have potential applications in industry. To improve these properties, a Dual-functional porous starch was prepared through one-pot synthesis. In this case, octenyl succinic anhydride (OSA) and syringic acid (SA) were selected to modify the porous starch (PS) by esterification, with subsequent signals recorded by 1H NMR at 1.2 ppm and FT-IR at 1743 cm-1, indicating the formation of Dual-functional porous starch grafted by OSA and SA. N2 adsorption analysis further proved that the porous structure (2.9 m2g-1) was still maintained after modification. This was followed by measurements of droplet size distribution (34.18 ± 3.80 μm), zeta potential (-39.62 ± 1.89 mV) and emulsion index (85.10 ± 1.76 %), all of which indicated good emulsifying capacity. Meanwhile, results of radical scavenging assay proved that the Dual-functional porous starch had considerable antioxidant properties due to the introduction of SA groups. Besides, the Dual-functional porous starch also showed good resistance to digestion. These findings not only provide a novel strategy for constructing multi-functionalized starchy materials, but also open up potential applications of starch in the food and pharmaceutical industries.

Formation, influencing factors, and applications of internal channels in starch: A review

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

Physicochemical properties of a novel chestnut porous starch nanoparticle

A novel chestnut porous starch nanoparticle (PSNP) was successfully synthesized, combining the properties of starch nanoparticle (SNP) and porous starch. The SNP obtained through ultrasonic and acid hydrolysis, exhibited a smaller particle size (173.9 nm) and a higher specific surface area (SSA) compared to native starch. After the synergistic hydrolysis by α-amylase and glucoamylase, the porous structure appeared on the surface of SNP. The prepared PSNP had a size of 286.3 nm and the highest SSA. In the adsorption experiments, PSNP showed higher capacities for adsorbing water, oil and methylene blue (MB) compared to other samples. The acid and enzymatic treatments resulted in a decrease in the levels of total starch content and amylose ratio. Furthermore, the treatments increased the levels of relative crystallinity (RC) and solubility, while decreasing the short-range ordered structure and swelling ratio at high temperatures. It was observed that the SSA of starch granules positively correlated with the MB and water adsorption capacity (WAC), solubility, and RC. These findings highlight the potential of the novel PSNP as an efficient adsorbent for bioactive substances and dyes.

The Fabrication, Drug Loading, and Release Behavior of Porous Mannitol

Porous materials are widely used as an effective strategy for the solubilization of insoluble drugs. In order to improve the solubility and bioavailability of low water-solubility drugs, it is necessary to prepare porous materials. Mannitol is one of the most popular excipients in food and drug formulations. In this study, porous mannitol was investigated as a drug carrier for low water solubility drugs. Its fabrication, drug loading, and drug release mechanisms were investigated. Porous mannitol was fabricated using the co-spray-antisolvent process and utilizing polyvinylpyrrolidone K30 (PVP K30) as the template agent. Porous mannitol particles were prepared by changing the proportion of the template agent, spraying the particles with mannitol, and eluting with ethanol in order to regulate their pore structure. In subsequent studies, porous mannitol morphology and characteristics were determined systematically. Furthermore, curcumin and ibuprofen, two poorly water-soluble drugs, were loaded into porous mannitol, and their release profiles were analyzed. The results of the study indicated that porous mannitol can be prepared using PVP K30 as a template and that the amount of template agent can be adjusted in order to control the structure of the porous mannitol. When the template agent was added in amounts of 1%, 3%, and 5%, the mannitol pore size increased by 167.80%, 95.16%, and 163.98%, respectively, compared to raw mannitol. Molecular docking revealed that mannitol and drugs are adsorbents and adhere to each other by force interaction. The cumulative dissolution of curcumin and ibuprofen-loaded porous mannitol reached 69% and 70%, respectively. The release mechanism of curcumin and ibuprofen from drug-loaded mannitol was suitable for the Korsmeyer-Peppas kinetic model. In summary, the co-spray-antisolvent method proved effective in fabricating porous materials rapidly, and porous mannitol had a remarkable effect on drug solubilization. The results obtained are conducive to the development of porous materials.

Preparation and characterization of a modified Canna starch as a wall material for the encapsulation of methyleugenol improves its antifungal activity against Fusarium trichothecioides

In this study, α-amylase (α-A) and 2-octenylsuccinic anhydride (OSA)-modified Canna starch (Cs) were prepared and characterized as wall materials and encapsulated with methyleugenol (α-A-OSA-Cs-methyleugenol); their in vitro antifungal activity against Fusarium trichothecioides (F. trichothecioides) was also investigated. The encapsulation efficiency under optimal encapsulation conditions was 83.98%. The results of particle size, polydispersity index (PDI), zeta potential, electron scanning microscopy and Fourier transform infrared spectroscopy showed that the modified Cs had superior physicochemical properties; it was also demonstrated that methyleugenol successfully entered the pores of Cs. The in vitro release study showed that α-A-OSA-Cs could effectively reduce their volatility under different temperature environments. α-A-OSA-Cs have excellent performance as slow-release wall materials, and after encapsulation with methyleugenol, the inhibition ability of F. trichothecioides mycelium growth was dose-dependent and improved, extending the shelf life of potatoes, which has good commercial value in the field of slow-release preservatives.

Bioactive delivery systems based on starch and its derivatives: Assembly and application at different structural levels

Starch and modified starch, spanning various structural levels, are comprehensively reviewed, with a special emphasis on the advancement of starch and its derivative-based delivery systems for bioactive substances. The pivotal aspect highlighted is the controlled release of active ingredients by starch-based delivery systems with distinct hierarchical structures. At the molecular level, diverse categories of starch degradation products, such as dextrin and highly branched starch, serve as versatile amphiphilic carriers for encapsulating active ingredients. At the level of helical structure, the distinctive configuration of the starch-guest complex partly determines the mechanism of controlled release for diverse active components. At the crystal and particle structural level, starch assumes the role of a carrier, effectively modulating the release of active substances, and enhances the innate physiological activity of different active components. As a natural polymer molecule, starch can also generate hydrogel materials in polymer form, expanding its utility in the fields of food, materials, and even medicine.

Effect of ethanol, phytic acid and citric acid treatment on the physicochemical and heavy metal adsorption properties of corn starch

Corn starch dispersions were heated with ethanol (E) and reacted with phytic acid (E-PA), citric acid (E-CA), and a mixture of phytic and citric acid (E-PACA) under dry-heating to prepare heavy metal adsorbents. Microscopy images indicated that ethanol treatment induced the formation of porous structures on the surface; furthermore, treatment with phytic and citric acid induced indentations, pores, and irregular structures in E-PA, E-CA, and E-PACA starches. Phytic and citric acid were retained in the starch molecules through ester bonds with the phosphate and carboxyl groups, respectively. Starch esterification by phytic and citric acid induced a loss of crystallinity, high water absorption capacity, and low solubility. E-PACA starch exhibited more efficient Cu2+ adsorption (38.13 mg/g) than native, E, E-PA, and E-CA starches (0.11, 0.49, 2.05, and 36.23 mg/g, respectively). Thus, modification with ethanol, phytic acid and citric acid can be applied to prepare natural starch-based heavy metal adsorbents.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Preparation, characterization and in vitro digestion of octenyl succinic anhydride-modified porous starch with different degrees of substitution

Octenyl succinic anhydride modified porous starch (OSA-PS) with degrees of substitution (DS) from 0.0123 to 0.0427 were prepared by aqueous phase method. From SEM, PS had a porous structure which showed a rough and corrosive surface after esterification with OSA. FT-IR revealed the characteristic peaks of OSA-PS at 1725 cm-1 and 1570 cm-1. From 1H NMR spectra, OSA-PS displayed extra chemical signal peaks at 0.85 ppm, 1.25 ppm and 1.96 ppm. These results fully demonstrated that OSA groups were successfully grafted onto PS. Furthermore, as DS increased, the specific surface area (5.6464 m2/g), pore volume (0.9959 × 10-2 cm3/g) and methylene blue adsorption capacity (24.3962 mg/g) of OSA-PS reached the maximum, while its relative crystallinity (26.8112 %) and maximum thermal decomposition temperature (291.96 °C) were the minimum. In vitro digestion studies showed that with the increase of DS, OSA-PS' contents of rapidly digestible starch and slowly digestible starch decreased from 9.06 % to 6.27 % and 28.38 % to 14.61 %, respectively. In contrast, its resistant starch had an increase in content from 62.56 % to 79.12%. The results provided an effective method for obtaining a double-modified starch with high specific surface area and anti-digestibility, thus broadening the industrial application of starch.

Oil structuring from porous starch to powdered oil: Role of multi-scale structure in the oil adsorption and distribution

Oil structuring from porous starch is a potential alternative for the industrial production of powdered oil, but their relationship between starch multi-scale structure and oil adsorption characteristics was not clear. This study compared the role of multi-scale structure of porous starch (PS) prepared by normal and waxy maize starch in the oil adsorption. Waxy maize porous starch exhibited higher oil adsorption capacity (32.43 %-98.71 %) and more oil distributed on the surface of granules than normal maize porous starch, resulting from the more pores, larger specific surface area (1.01-1.53 m2/g), and pore size (8.45-9.32 nm). The enzymolysis time of native starch dominated oil distribution, leading to different granule adhesion and aggregation state. Pearson correlation analysis further showed oil adsorption capacity was negatively correlated with particle size, but positively correlated with enzymolysis rate and specific surface area of PS. The formation of powdered oil was mainly through the physical adsorption, including surface adsorption and pore adsorption. These findings could provide a promising route for the preparation of powdered oil with controlled multi-scale structure of PS.

Adsorption properties of corn starch modified by malt amylases and crosslinking agents: A comparison between sodium trimetaphosphate and organic acids

In order to investigate the effects of different crosslinking agents on physicochemical properties and adsorption properties of porous starch. Native corn starch was hydrolyzed by maltase and crosslinked with different crosslinking agents. Sodium trimetaphosphate crosslinked porous starch (STMP-MPS), malic acid cross-linked porous starch (MA-MPS) and citric acid cross-linked porous starch (CA-MPS) were prepared. After crosslinking, MA-MPS and CA-MPS showed a new CO stretching absorption peak at 1738 cm-1, and the crosslinking degree was much higher than that of STMP-MPS. The surface area of MA-MPS was 36 % higher than that of STMP-MPS. Compared with the average pore size of 12.43 nm of STMP-MPS, CA-MPS (14.02 nm) and MA-MPS (14.79 nm) were increased more significantly. The degradation temperature of MA-MPS and CA-MPS was increased by the introduction of ester bond, which indicates that the organic acid cross-linking strengthens the starch granules and hence more energy is required for disruption. Compared with STMP-MPS, the water absorption of MA-MPS and CA-MPS increased by 64 % and 32 %, respectively. Furthermore, the adsorption capacity of MA-MPS to essential oil was the strongest, about 4 times that of STMP-MPS. Overall, it is feasible to modify porous starch by crosslinking reaction to improve its heat resistance and adsorption properties.

Effect of melting combined with ice recrystallization on porous starch preparation: Pore-forming properties, granular morphology, functionality, and multi-scale structures

In this work, critical melting (CM) combined with freeze-thawing treatment (FT, freezing at -20 ℃ and -80 ℃, respectively) was used to prepare porous starch. The results showed that CM combined with the slow freezing rate (-20 ℃) can prepare porous starch with characteristics of grooves and cavities, while combined with the rapid freezing rate (-80 ℃) can prepare with holes and channels, especially after repeating FT cycles. Compared with the native counterpart, the specific surface area, pore volume, and average diameter of CMFT-prepared porous starch were significantly increased to 4.07 m2/g, 7.29 cm3/g × 10-3, and 3.57 nm, respectively. CMFT significantly increased the thermal stability of starch, in which the To, Tp, and Tc significantly increased from 63.32, 69.62, and 72.90 (native) to ∼69, 72, and 76 °C, respectively. CMFT significantly increased water and oil absorption of porous starch from 91.20 % and 72.00 % (native) up to ∼163 % and 94 %, respectively. Moreover, CMFT-prepared porous starch had a more ordered double-helical structure, which showed in the significantly increased relative crystallinity, semi-crystalline lamellae structure, and the proportion of the double helix structure of starch. The synergistic effect of melting combined with ice recrystallization can be used as an effective way to prepare structure-stabilized porous starch.

Efficient removal of cesium ions using Prussian blue loaded on magnetic porous biochar synthesized by one-step calcination

Prussian blue (PB) is widely used for the selective removal of radioactive cesium ions (Cs+) from aqueous solutions. Due to its small size and easy dispersion in water, PB requires a carrier that is both inexpensive and easily separable. Magnetic porous biochar (MPBC) was formed by activating starch with FeCl3 through a one-step calcination method. MPBC can be used as a carrier for Prussian blue, which is easily separated from the solution. This composite material (PB/MPBC) has a rich pore structure and maintains effective surface area, which can facilitate the penetration of Cs+ into the adsorbent. Besides, PB/MPBC exhibits high selectivity and good adsorption capacity achieving a large removal capacity of 101.43 mg/g. Thus, this study provides a novel approach for preparing composites with efficient removal of Cs+.

Probing covalent and non-covalent interactions between vanillic acid and starch and their effects on digestibility by solid-state NMR

Intermolecular interactions play a significant role on the physicochemical properties and digestibility of starchy foods. This study investigated the covalent and non-covalent interactions between vanillic acid (VA) and porous starch (PS) as well as their effects on digestibility using solid-state NMR. VA-PS conjugates and mixtures were synthesized and characterized using 1H NMR, FT-IR, SEM and XRD. 13C NMR peaks at 163 ppm and FT-IR signals at 1737 cm-1 indicated the formation of ester bond in VA-PS conjugates. While differences between covalent and non-covalent interactions were also probed by solid-state NMR. The specific binding sites between VA and PS were subsequently identified by 1H13C HETCOR spectra before assessing the impact of covalent and non-covalent interactions on digestibility through an in vitro digestion test. The results revealed 13C chemical shifts of about 2.0 ppm, indicating stronger intermolecular interactions, and reduced mobility of the VA-PS conjugate due to its covalent bonding. Overall, the results showed that the VA-PS conjugate, characterized by stronger covalent interactions, exhibited superior effects in inhibiting starch digestibility compared with non-covalent interactions.

Research progress of starch as microencapsulated wall material

Starch is non-toxic, low cost, and possesses good biocompatibility and biodegradability. As a natural polymer material, starch is an ideal choice for microcapsule wall materials. Starch-based microcapsules have a wide range of applications and application prospects in fields such as food, pharmaceuticals, cosmetics, and others. This paper firstly reviews the commonly used wall materials and preparation methods of starch-based microcapsules. Then the effect of starch wall materials on microcapsule properties is introduced in detail. It is expected to provide researchers with design inspiration and ideas for the development of starch-based microcapsules. Next the applications of starch-based microcapsules in various fields are presented. Finally, the future trends of starch-based microcapsules are discussed. Molecular simulation, green chemistry, and solutions to the main problems faced by resistant starch microcapsules may be the future research trends of starch-based microcapsules.

Unveiling Optimal Synthesis and Structural Insights of Starch Ferulate via the Mechanoenzymatic Method

In this study, starch ferulate was synthesized employing a mechanoenzymatic method, specifically based on the twin screw extrusion technique and lipase catalysis. The research then primarily centered on optimizing process parameters and conducting structural analysis. Optimal conditions were determined to be 8.2% ferulic acid addition, 66 °C extrusion temperature, and 3.2% lipase (N435) addition. The enzyme-catalyzed time was 30 s. The degree of substitution for starch ferulate was quantified at 0.005581 under these specific conditions. The presence of C=O bonds in the synthesized starch ferulate proved that the synthesis process was efficient. Additionally, the crystal structure underwent reconstruction. Observations through Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM) demonstrated that the mechanoenzymatic method led to an augmentation in the specific surface area of starch molecules, thereby facilitating the exposure of active sites. This breakthrough underscores the vast potential of mechanoenzymatic techniques to revolutionize the rapid and sustainable synthesis of starch ferulate, marking a pioneering stride in ester synthesis. The insights garnered from this study transcend theory, offering a visionary roadmap for the development and real-world deployment of advanced modified starch esters.

Dextranase Production Using Marine Microbacterium sp. XD05 and Its Application

Dextranase, also known as glucanase, is a hydrolase enzyme that cleaves α-1,6 glycosidic bonds. In this study, a dextranase-producing strain was isolated from water samples of the Qingdao Sea and identified as Microbacterium sp. This strain was further evaluated for growth conditions, enzyme-producing conditions, enzymatic properties, and hydrolysates. Yeast extract and sodium chloride were found to be the most suitable carbon and nitrogen sources for strain growth, while sucrose and ammonium sodium were found to be suitable carbon and nitrogen sources for fermentation. The optimal pH was 7.5, with a culture temperature of 40 °C and a culture time of 48 h. Dextranase produced by strain XD05 showed good thermal stability at 40 °C by retaining more than 70% relative enzyme activity. The pH stability of the enzyme was better under a weak alkaline condition (pH 6.0-8.0). The addition of NH4+ increased dextranase activity, while Co2+ and Mn2+ had slight inhibitory effects on dextranase activity. In addition, high-performance liquid chromatography showed that dextran is mainly hydrolyzed to maltoheptanose, maltohexanose, maltopentose, and maltootriose. Moreover, it can form corn porous starch. Dextranase can be used in various fields, such as food, medicine, chemical industry, cosmetics, and agriculture.

Ultrasound-assisted acid/enzymatic hydrolysis preparation of loquat kernel porous starch: A carrier with efficient palladium loading capacity

Porous starch, with excellent renewal and thermodynamic stability characteristics, could be utilized as a novel carrier for metals. In this research, starch was obtained from wasted loquat kernel (LKS) and converted into loquat kernel porous starch (LKPS) through ultrasound-assisted acid/enzymatic hydrolysis. Then, LKS and LKPS were utilized for loading with palladium. The porous structures of LKPS were evaluated by the results of water/oil absorption rate and N2 adsorption analysis, and the physicochemical properties of LKPS and starch@Pd were analyzed by FT-IR, XRD, SEM-EDS, ICP-OES, and DSC-TAG. LKPS prepared by the synergistic method formed a better porous structure. Its specific surface area was 2.65 times that of LKS, and the water/oil absorption capabilities were considerably improved to 152.28 % and 129.59 %, respectively. XRD patterns showed that the presence of diffraction peaks at 39.7° and 47.1°, indicating successful palladium loading onto LKPS. The EDS and ICP-OES results revealed that the palladium loading capacity of LKPS was superior to that of LKS, with a significantly increased loading ratio of 2.08 %. In addition, LKPS@Pd exhibited excellent thermal stability, with a temperature range of 310-320 °C. Therefore, LKPS was a palladium carrier with highly efficient loading ratio, and LKPS@Pd had promising properties as a competent catalyst.

Pulsed Electric Field-Assisted Enzymatic and Alcoholic-Alkaline Production of Porous Granular Cold-Water-Soluble Starch: A Carrier with Efficient Zeaxanthin-Loading Capacity

In this study, porous starch was modified using pulsed electric field (PEF) pretreatment and alcoholic-alkaline treatment to prepare porous granular cold-water-soluble starch (P-GCWSS). The soluble porous starch has high adsorption capability and high cold water solubility, allowing effective encapsulation of zeaxanthin and improving zeaxanthin's water solubility, stability, and bioavailability. The physical and chemical properties of GCWSS and complex were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results showed that the cold water solubility of the pulsed electric field-treated porous granular cold-water-soluble starch (PEF-P-GCWSS) increased by 12.81% compared to granular cold-water-soluble starch (GCWSS). The pulsed electric field treatment also increased the oil absorption of PEF-P-GCWSS was improved by 15.32% compared to porous granular cold-water-soluble starch (P-GCWSS). PEF-P-GCWSS was effective in encapsulating zeaxanthin, which provided a good protection for zeaxanthin. The zeaxanthin-saturated solubility in water of PPG-Z was increased by 56.72% compared with free zeaxanthin. The zeaxanthin embedded in PEF-P-GCWSS was able to be released slowly during gastric digestion and released rapidly during intestinal digestion.

Preparation of enzymolysis porous corn starch composite microcapsules embedding organic sunscreen agents and its UV protection performance and stability

In this paper, a natural composite wall material sunscreen microcapsule was prepared, which significantly improved the SPF value and photostability of the embedded sunscreen agents. Using modified porous corn starch and whey protein as wall materials, the sunscreen agents 2-[4-(diethylamino)-2-hydroxybenzoyl] benzoic acid hexyl ester and ethylhexyl methoxycinnamate were embedded by adsorption, emulsion, encapsulation and solidification. The embedding rate of the obtained sunscreen microcapsules was 32.71 % and the average size was 7.98 μm; the enzymatic hydrolyzed starch formed a porous structure, its X-ray diffraction pattern did not change significantly, and the specific volume and oil absorption rate increased by 39.89 % and 68.32 %, respectively, compared with those before enzymatic hydrolyzed; The porous surface of the starch after embedding the sunscreen was covered and sealed with whey protein. 120 h sunscreen penetration rate was lower than 12.48 %; Compared with the lotion containing the same amount of sunscreen but not encapsulated, the SPF value of the lotion containing sunscreen microcapsules increased by 62.24 %, and the photostability of sunscreen microcapsules increased by 66.28 % within 8 h under the irradiation intensity of 25 w/m². The wall material and the preparation method are natural and environmentally friendly, and have a good application prospect in low-leakage drug delivery system.

Modified porous starch for enhanced properties: Synthesis, characterization and applications

Native starches have low water solubility at room temperature and poor stability, which demand modifications to overcome. Porous starch as a modified one shows enhanced adsorptive efficiency and solubility compared with its native starch. In contrast, some inherent disadvantages exist, such as weak mechanical strength and low thermal resistance. Fortunately, modified porous starches have been developed to perform well in adsorption capacity and stability. Modified porous starch can be prepared by esterification, crosslinking, oxidation and multiple modifications to the porous starch. The characterization of modified porous starch can be achieved through various analytical techniques. Modified porous starch can be utilized as highly efficient adsorbents and encapsulants for various compounds and applied in various fields. This review dealt with the progress in the preparation, structural characterization and application of modified porous starch. The objective is to provide a reference for its development, utilization, and future research directions.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Insight into structure-activity relationships of hydroxycinnamic acids modified porous starch: The effect of phenolic hydroxy groups

Antioxidant capacity of hydroxycinnamic acids-modified starch mainly depends on their chemical structure. Herein, cinnamic acid as well as meta-substituted and para-substituted cinnamic acid were selected for esterification with porous starch (labelled as CA@PS, m-CA@PS and p-CA@PS), with the successful formation of porous starch (labelled as PS) esters then confirmed by ¹H NMR, ¹³C solid-state NMR and FT-IR spectroscopy. Three PS esters with almost same degrees of substitution (DS) were obtained, and antioxidant assays, including DPPH radical scavenging, reducing power and hydroxyl radical scavenging tests, were subsequently used to evaluate the antioxidant activity of the esterified PS. Overall, CA@PS showed weak antioxidant activity because of the absence of phenolic hydroxy, while p-CA@PS displayed better antioxidant capacity. Because its conjugated structure offered the stronger electron-donating effect, that could enhance antioxidant capacity. Therefore, antioxidant capacity depended significantly on overall chemical structure, including numbers and substitution positions of phenolic hydroxy groups.

Debranching facilitates malate esterification of waxy maize starch and decreases the digestibility

In this study, the debranching followed by malate esterification was employed to prepare malate debranched waxy maize starch (MA-DBS) with a high degree of substitution (DS) and low digestibility using malate waxy maize starch (MA-WMS) as the control. The optimal esterification conditions were obtained using an orthogonal experiment. Under this condition, the DS of MA-DBS (0.866) was much higher than that of MA-WMS (0.523). A new absorption peak was generated at 1757 cm^-1 in the infrared spectra, indicating the occurrence of malate esterification. Compared with MA-WMS, MA-DBS had more particle aggregation, resulting in an increase in the average particle size from scanning electron microscopy and particle size analysis. The X-ray diffraction results showed that the relative crystallinity decreased after malate esterification, in which the crystalline structure of MA-DBS almost disappeared, which was consistent with the decrease of decomposition temperature by thermogravimetric analysis and the disappearance of the endothermic peak by differential scanning calorimeter. In vitro digestibility tests showed an order: WMS > DBS > MA-WMS > MA-DBS. The MA-DBS showed the highest content of resistant starch (RS) of 95.77 % and the lowest estimated glycemic index of 42.27. In a word, pullulanase debranching could produce more short amylose, promoting malate esterification and improving the DS. The presence of more malate groups inhibited the formation of starch crystals, increased particle aggregation, and enhanced resistance to enzymolysis. The present study provides a novel protocol for producing modified starch with higher RS content, which has potential application in functional foods with a low glycemic index.

Effects of Incorporation of Porous Tapioca Starch on the Quality of White Salted (Udon) Noodles

White salted (udon) noodles are one of the major staple foods in Asian countries, particularly in Japan. Noodle manufacturers prefer the Australian noodle wheat (ANW) varieties to produce high-quality udon noodles. However, the production of this variety has reduced significantly in recent years, thus affecting the Japanese noodle market. Noodle manufacturers often add tapioca starch to compensate for the flour scarcity; however, the noodle-eating quality and texture are significantly reduced. This study, therefore, investigated the effect of the addition of porous tapioca starch on the cooking quality and texture of udon noodles. For this, tapioca starch was initially subjected to enzyme treatment, ultrasonication, and a combination of both to produce a porous starch where a combined enzyme (0.4% alpha amylase)-ultrasound treatment (20 kHz) yielded a porous starch with increased specific surface area and better absorbent properties which are ideal for udon noodle manufacturing, Later, udon noodles were prepared using three varieties of ANW, a hard Mace variety, and commercial wheat flour by incorporating the prepared porous tapioca starch at a concentration of 5% and 10% of dry ingredients. Adding this porous starch resulted in a lower cooking time with higher water absorption and desirable lower cooking loss compared to the control sample with 5% of the porous starch chosen as the optimum formulation. Increasing the level of the porous starch reduced the hardness of the noodles whilst maintaining the desired instrumental texture. Additionally, a multivariate analysis indicated a good correlation between responses' optimum cooking time and water absorption capacity as well as turbidity and cooking loss, and a cluster analysis grouped noodle samples prepared from different varieties into the same clusters based on the porous starch added, indicating the possibility of different market strategies to improve the quality of the udon noodles produced from different wheat varieties.

Effects of high-speed shear and double-enzymatic hydrolysis on the structural and physicochemical properties of rice porous starch

This study aimed to investigate the physicochemical properties of the rice porous starch (HSS-ES) prepared by high-speed shear combined with double-enzymatic (α-amylase and glucoamylase) hydrolysis, and to reveal their mechanism. The analyses of ¹H NMR and amylose content showed that high-speed shear changed the molecular structure of starch and increased the amylose content (up to 20.42 ± 0.04 %). FTIR, XRD and SAXS spectra indicated that high-speed shear did not change the starch crystal configuration but caused a decrease in short-range molecular order and relative crystallinity (24.42 ± 0.06 %), and a loose semi-crystalline lamellar, which were beneficial to the followed double-enzymatic hydrolysis. Therefore, the HSS-ES displayed a superior porous structure and larger specific surface area (2.962 ± 0.002 m²/g) compared with double-enzymatic hydrolyzed porous starch (ES), resulting in the increase of water and oil absorption from 130.79 ± 0.50 % and 109.63 ± 0.71 % to 154.79 ± 1.14 % and 138.40 ± 1.18 %, respectively. In vitro digestion analysis showed that the HSS-ES had good digestive resistance derived from the higher content of slowly digestible and resistant starch. The present study suggested that high-speed shear as an enzymatic hydrolysis pretreatment significantly enhanced the pore formation of rice starch.

Highly selective adsorption of Hg (II) from aqueous solution by three-dimensional porous N-doped starch-based carbon

For the first time, N-doped carbon materials with 3D porous-layered skeleton structure was synthesized through a one-step co-pyrolysis method, which was fabricated by co-pyrolysis of natural corn starch and melamine using metal catalysts (Ni (II) and Mn (II)). The 3D-NC possessed a heterogeneously meso-macroporous surface with a hierarchically connected sheet structure inside. Batch adsorption experiments suggested that highly selective adsorption of Hg (II) by the 3D-NC could be completed within 90 min and had maximum adsorption capacities as high as 403.24 mg/g at 293 K, pH = 5. The adsorption mechanism for Hg (II) was carefully evaluated and followed the physical adsorption, electrostatic attraction, chelation, and ion exchange. Besides, thermodynamic study demonstrated that the Hg (II) adsorption procedure was spontaneous, endothermic, and randomness. More importantly, the 3D-NC could be regenerated and recovered well after adsorption-desorption cycles, showing a promising prospect in the remediation of Hg (II)-contaminated wastewater.

Construction of caffeic acid modified porous starch as the dual-functional microcapsule for encapsulation and antioxidant property

A dual-functional food-grade microcapsule, which was constructed by caffeic acid and porous starch was obtained. Caffeic acid modified porous starch (CA-PS) was accordingly synthesized successfully by esterification. Carbonyl signal observed by ¹³C solid state NMR (170 ppm) and FT-IR (1745 cm^-1), indicating the formation of ester bond. BET of CA-PS was determined as 44.8 m²/g by N₂ adsorption analysis. The results proved CA-PS has both excellent adsorption and antioxidant activity. Furthermore, it has been applied for encapsulation of linoleic acid (LA) to prevent its degradation effectively, because LA adsorbed in porous adsorbents without antioxidant activity may still suffer serious oxidation. Besides, ¹H NMR Integral of LA did not show a significant decay. This observation demonstrated CA-PS indeed has the better performance on protection of LA than PS. We expect this work will boost research on designing and employing multi-functional starchy materials for further applications.

Sonoprocessing: mechanisms and recent applications of power ultrasound in food

There is a growing interest in using green technologies in the food industry. As a green processing technique, ultrasound has a great potential to be applied in many food applications. In this review, the basic mechanism of ultrasound processing technology has been discussed. Then, ultrasound technology was reviewed from the application of assisted food processing methods, such as assisted gelation, assisted freezing and thawing, assisted crystallization, and other assisted applications. Moreover, ultrasound was reviewed from the aspect of structure and property modification technology, such as modification of polysaccharides and fats. Furthermore, ultrasound was reviewed to facilitate beneficial food reactions, such as glycosylation, enzymatic cross-linking, protein hydrolyzation, fermentation, and marination. After that, ultrasound applications in the food safety sector were reviewed from the aspect of the inactivation of microbes, degradation of pesticides, and toxins, as well inactivation of some enzymes. Finally, the applications of ultrasound technology in food waste disposal and environmental protection were reviewed. Thus, some sonoprocessing technologies can be recommended for the use in the food industry on a large scale. However, there is still a need for funding research and development projects to develop more efficient ultrasound devices.

Porous corn starch obtained from combined cold plasma and enzymatic hydrolysis: Microstructure and physicochemical properties

The combined effect of cold plasma treatment and enzymatic hydrolysis was investigated on the physicochemical and microstructural properties of porous corn starch. Scanning electron microscopy (SEM) images depicted that the combined treatment led to the creation of deeper pores on the surface of starch granules. The combined treatment indicated the highest swelling power (19.49 g/g), solubility (10.08 %), specific surface area (2.97 m²/g) and total pore volume (10.47 cm³/g). According to the X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), the combined treatment, compared with the enzymatic hydrolysis, decreased the starch crystallinity, the order of the double-helix structure, and the starch gelatinization enthalpy. The rapid visco analyzer (RVA) pasting profile revealed that the combined treatment elevated the breakdown and setback viscosities. This study indicated that cold plasma pretreatment, as a green non-thermal technology, facilitated the performance of enzymes, resulting in the production of a porous starch with a higher absorption capacity.

Porous Microparticles of Corn Starch as Bio-Carriers for Chia Oil

Native corn starch and pretreated corn starch were treated with α-amylase, glucoamylase and mixtures of both to generate starches with high porosity with conserved granular structure. Porous starches were characterized; particle size distribution analysis, nitrogen adsorption-desorption analysis, scanning electron microscopy, water and oil adsorption capacity, differential scanning calorimeter, X-ray diffraction and damaged starch techniques were used. The α-amylase/glucoamylase mixture at the highest dose was the best treatment to generate porous starches with interesting adsorption capacity and granular structure conservation. Selected starches were impregnated with chia oil using a vacuum. Pretreated corn starch modified with the α-amylase/glucoamylase mixture showed no significant differences on impregnation capacity compared with native starch with a similar enzyme treatment. The highest oxidative stability was achieved with pretreated porous starch impregnated with 10 to 25% chia oil, compared with the bulk oil (5.37 to 4.72 and 2.58 h, respectively). Results have demonstrated that vacuum impregnation could be a potential technique for the incorporation of oil in porous structures based on starch and porous starches obtained by enzymatic hydrolysis are a promising material for the incorporation and protection of oils susceptible to oxidation.

Development of antioxidant active packaging films with slow release properties incorporated with tea polyphenols-loaded porous starch microcapsules

Slow release active packaging films can realize the sustained release of active agents and prolong the shelf life of food. For this aim, a novel slow release active polyvinyl alcohol (PVA) film was developed by using solution casting method. With porous starch loaded with tea polyphenols (PSTP) as core material and maltodextrin (MD) as wall material, PSTP@MD microcapsules were prepared using freeze drying method and used as slow release carrier of tea polyphenols (TP) in the active films. The interactions between PSTP@MD microcapsules and PVA molecular chains were physical interactions. In addition, the relative crystallinity of the slow release active films was reduced to 23.74 %. The addition of PSTP@MD microcapsules can enhance the ductility of active films and reduce the water content and swelling degree of active films by 46.74 % and 54.38 %, respectively. Moreover, the thermal stability, water vapor and ultraviolet barrier properties of active films were promoted. The transparency and antioxidant activity of active films was high, and the radical scavenging activity of active films was 58 %. The encapsulation of TP with PSTP@MD microcapsules can realize the slow release of TP. The slow release active films had antioxidant activity and sustained release properties, which could be used as an active packaging film to extend the shelf life of food.

Freeze Moisture Treatment and Ozonation of Adlay Starch (Coix lacryma-jobi): Effect on Functional, Pasting, and Physicochemical Properties

Adlay starch has great potential as a cereal starch, but it has several weaknesses, namely a low swelling volume, low solubility, and low stability. The purpose of this study was to improve the characteristics of adlay starch, such as porosity, functional properties, and pasting properties, through starch modification using freeze moisture treatment (FMT) and ozonation. This study consisted of several treatments, namely FMT, ozonation, and a combination of FMT + ozonation. The results show that the FMT and ozonation generally increased water absorption capacity, swelling volume, solubility, and number of pores of the starch granule. The pasting properties showed an increase in the viscosity of the hot paste and caused a decrease in the gelatinization temperature, breakdown, and setback viscosity. FMT 70% + ozonation produced modified adlay starch with a porous granular surface, swelling volume value of 21.10 mL/g, water absorption capacity of 1.54 g/g, a solubility of 9.20%, and an increase in the amorphous structure but did not cause the emergence of new functional groups. The combination of FMT + ozonation was effective in improving the functional, pasting, and physicochemical properties of adlay starch.

Effects of Enzymatic Modification and Cross-Linking with Sodium Phytate on the Structure and Physicochemical Properties of Cyperus esculentus Starch

In this study, C. esculentus porous starch (PS) and C. esculentus cross-linked porous starch (CPS) were prepared by enzymatic modification and sodium phytate cross-linking, and their physicochemical and structural properties were determined. The results showed that the adsorption and emulsification capacities of PS were 1.3606 g/g and 22.6 mL/g, respectively, which were significantly higher than 0.5419 g/g and 4.2 mL/g of C. esculentus starch (NS). The retrogradation curves of starch paste showed that the stability of PS was inferior to that of NS. In addition, the results of texture analysis showed that the gel strength of PS was also significantly reduced relative to NS. The PS exhibited a rough surface with pores and low molecular order and crystallinity according to scanning electron microscope (SEM), fourier infrared spectroscopy (FTIR), and X ray diffractometer (XRD) analyses. As compared to PS, CPS still presented a high adsorption capacity of 1.2744 g/g and the steadiness of starch paste was significantly better. XPS demonstrated the occurrence of the cross-linking reaction. Our results show that enzyme modification and dual modification by combining enzymatic treatment with sodium phytate cross-linking can impart different structures and functions to starch, creating reference material for the application of modified starch from C. esculentus.

Characterization and application of a coating of starch extracted from avocado (Persea americana L. cv. Hass) seeds as an alternative to reduce acrylamide content in French fries

The starch extracted from avocado (Persea americana L. cv. Hass) seeds was characterized and used in the preparation of an edible coating to reduce the oil uptake and acrylamide content in French fries. Starch characterization was carried out using Differential Scanning Calorimetry, Fourier transform infrared spectrophotometry, gelatinization, and scanning electron microscopy. Uncoated (UFF) and coated (CFF) French fries were compared and evaluated for moisture, water activity (Aw), fat, color, firmness, acrylamide content, and sensorial analysis. The extracted starch presented a high crystalline structure and good stability to mechanical work and heat treatments. The CFF French fries showed significantly higher Aw, color parameter a*, but lower luminosity and acrylamide content than UFF samples. Similarly, the CFF samples tended to decrease the fat content, although without statistical differences. Avocado seed starch can be an economical and technically feasible alternative to the food industry as an effective coating to reduce acrylamide content in French fries.

Structure and Menthone Encapsulation of Corn Starch Modified by Octenyl Succinic Anhydride and Enzymatic Treatment

In order to improve the ability of starch to absorb menthone, corn starch was modified by enzymatic treatment (amyloglucosidase and α-amylase) combined with octenyl succinic anhydride (OSA) esterification. The oil absorption rate of starch modified by enzymatic treatment followed by OSA (P-OSA) reached 101.33%, whereas that of samples with reverse action sequences (OSA-P) was only 59.67%. The degree of substitution of OSA-P was also generally lower than that of P-OSA. At high OSA addition, OSA-P had a smaller specific surface area with fewer pores because octenyl succinic (OS) groups impeded the enzymatic treatment. Compared with OSA-P, the lamellar structure of P-OSA is sparser and less ordered. Owing to its pores, P-OSA was beneficial for the reaction to occur inside the granules, which was observed by Raman spectroscopy and laser confocal microscopy. At high OSA addition, the loading of P-OSA to menthone could reach 64.34 mg/g.

Molecular insight into the interactions between starch and cuminaldehyde using relaxation and 2D solid-state NMR spectroscopy

The interaction between cuminaldehyde and starch mainly governed the effect of further handling on food applications of cuminaldehyde. However, little information is available about the interactions of these components. We utilized relaxation and heteronuclear correlation (HETCOR) solid-state NMR spectroscopy to investigate the interaction between cuminaldehyde and porous starch at molecular level. We found that the interactions occurred mainly through hydrogen bonds. Cuminaldehyde molecules were restricted by starch, which resulted in the limitation of their movements and the longer ¹H T₁ relaxation time. Furthermore, the well resolved correlated peaks in 2D ¹H-¹³C HETCOR spectrum confirmed the formation of hydrogen bonds. The oxygen atoms at hydroxyl-2,3 of starch were the binding sites, which combined with hydrogens of cuminaldehyde. This present work not only afford a new approach to obtain a molecular understanding of interactions, but also expanded the application of solid-state NMR to investigation of the interaction on functional components.