Cellulose nanofiber-based multifunctional films integrated with carbon dots and anthocyanins from Brassica oleracea for active and intelligent food packaging applications

Edible coating using carbon quantum dots for fresh produce preservation: A review of safety perspectives

Fresh produce deteriorates and spoils after harvest due to its perishable nature. Deterioration in quality over time has become a major problem for the food industry, placing an undue burden on the economy and agriculture. Food scientists have developed various methods and technologies to prevent spoilage of fruits and vegetables during storage and logistics. Utilizing carbon quantum dots (CQDs) in the form of active packaging and coatings has been a popular strategy recently. CQDs have recently attracted attention as sustainable and functional nanomaterials. CQDs are popular among food scientists due to their easy and economical synthesis, sustainability, non-toxicity, biocompatibility, edibility, UV protection, and antibacterial and antioxidant activities. Although many studies have been conducted and reviewed on the utilization of CQDs in the manufacture of flexible active packaging materials, relatively few studies have investigated the use of CQDs in edible coating formulations for fresh produce. The main reasons for this are concerns about the potential toxicity and edibility of CQDs if they are coated directly on fresh produce. Therefore, this review aims to address these issues by investigating the dose-dependent non-toxicity and biocompatibility of sustainable CQDs along with other important properties from a food packaging perspective. Additionally, this review focuses on the studies performed so far on the direct coating of CQD-based formulations on fresh and fresh-cut fruits and vegetables and discusses the important impact of CQDs on the quality of coated agricultural products. This review is intended to provide food packaging researchers with confidence and prospects for utilizing sustainable CQDs in direct coating formulations for food.

Isolation of taro peel cellulose nanofibers and its application in improving functional properties of taro starch nanocomposites films

The current work focuses on developing nanocomposite films using taro starch and cellulose nanofibers extracted from the root's peel. Films were prepared using mixtures of starch, cellulose nanofibers (0 %, 5 %, 10 %, and 15 % w/w), glycerol, and water. Results showed that the addition of cellulose nanofibers increased film thickness, opacity, UV-light barrier capacity, and water swelling percentage. All films showed a typical B-type X-ray diffraction pattern characteristic of semicrystalline materials. FTIR analysis confirmed chemical interactions between the starch chains and the nanofibers, which probably interact through hydrogen bonds. Nanocomposite films exhibited increased tensile strength and reduced strain at break compared to control materials. Films with cellulose nanofibers showed an increase in Young's modulus compared to control ones, with no differences observed between films with cellulose nanofibers at 10 % and 15 %. Furthermore, films with cellulose nanofibers at 5 % and 10 % exhibited lower water vapor permeability than control samples, while those with cellulose nanofibers at 15 % showed an increase in this parameter compared to other materials. These results suggest that incorporating taro cellulose nanofibers is a promising alternative for obtaining taro starch nanocomposites films with improved properties.

Sustainable production of cellulosic biopolymers for enhanced smart food packaging: An up-to-date review

Biodegradable and sustainable food packaging (FP) materials have gained immense global importance to reduce plastic pollution and environmental impact. Therefore, this review focused on the recent advances in biopolymers based on cellulose derivatives for FP applications. Cellulose, an abundant and renewable biopolymer, and its various derivatives, namely cellulose acetate, cellulose sulphate, nanocellulose, carboxymethyl cellulose, and methylcellulose, are explored as promising substitutes for conventional plastic in FP. These reviews focused on the production, modification processes, and properties of cellulose derivatives and highlighted their potential for their application in FP. Finally, we reviewed the effects of incorporating cellulose derivatives into film in various aspects of packaging properties, including barrier, mechanical, thermal, preservation aspects, antimicrobial, and antioxidant properties. Overall, the findings suggest that cellulose derivatives have the potential to replace conventional plastics in food packaging applications. This can contribute to reducing plastic pollution and lessening the environmental impact of food packaging materials. The review likely provides insights into the current state of research and development in this field and underscores the significance of sustainable food packaging solutions.

Preparation of multi-functional active packaging film of Galla chinensis waste CDs/pullulan

In this study, multifunctional green carbon dots (CDs) have been synthesized using Galla chinensis waste (GCW) via hydrothermal method for the first time. An active packaging film has been developed in this work by combining CDs and pullulan (PL), using the solution-casting method. The microscopic morphology revealed that the CDs that were prepared using GCW exhibited good compatibility with PL. In addition, it also led to improvement in the toughness of the PL film (14.01 % to 20.26 %), along with its water vapor permeability value [1.31 to 0.53 (g·mm)/(kPa·h·m2)]. The composite films consisting of CDs exhibited good UV blocking rates for the UVA (90.41 %-7.87 %), UVB (87.76 %-0.08 %), and UVC (83.39 %-0 %) spectral ranges. The composite films exhibited strong antioxidant activity, and the clearance of ABTS and DPPH were obtained to be 93.61 % and 86.30 %, respectively. In addition, the composite films showed good antibacterial activity for E. coli and S. aureus, with a high antibacterial rate of up to 99.99 %. Finally, the non-contact preservation of strawberries over a duration of 10 d at room temperature confirmed that the prepared composite film can help preserve the quality of strawberries, as well as extended their shelf-life.

Digitalization of Colorimetric Sensor Technologies for Food Safety

Colorimetric sensors play a crucial role in promoting on-site testing, enabling the detection and/or quantification of various analytes based on changes in color. These sensors offer several advantages, such as simplicity, cost-effectiveness, and visual readouts, making them suitable for a wide range of applications, including food safety and monitoring. A critical component in portable colorimetric sensors involves their integration with color models for effective analysis and interpretation of output signals. The most commonly used models include CIELAB (Commission Internationale de l'Eclairage), RGB (Red, Green, Blue), and HSV (Hue, Saturation, Value). This review outlines the use of color models via digitalization in sensing applications within the food safety and monitoring field. Additionally, challenges, future directions, and considerations are discussed, highlighting a significant gap in integrating a comparative analysis toward determining the color model that results in the highest sensor performance. The aim of this review is to underline the potential of this integration in mitigating the global impact of food spoilage and contamination on health and the economy, proposing a multidisciplinary approach to harness the full capabilities of colorimetric sensors in ensuring food safety.

Fast and sustainable production of smart nanofiber mats by solution blow spinning for food quality monitoring: Potential of polycaprolactone and agri-food residue-derived anthocyanins

The shelf life of perishable foods is estimated through expensive and imprecise analyses that do not account for improper storage. Smart packaging, obtained by agile manufacturing of nanofibers functionalized with natural pigments from agri-food residues, presents promising potential for real-time food quality monitoring. This study employed the solution blow spinning (SBS) technique for the rapid production of smart nanofiber mats based on polycaprolactone (PCL), incorporating extracts of agricultural residues rich in anthocyanins from eggplant (EE) or purple cabbage (CE) for monitoring food quality. The addition of EE or CE to the PCL matrix increased the viscosity of the solution and the diameter of the nanofibers from 156 nm to 261-370 nm. The addition of extracts also improved the mechanical and water-related properties of the nanofibers, although it reduced the thermal stability. Attenuated total reflectance Fourier-transform infrared spectroscopy confirmed the incorporation of anthocyanins into PCL nanofibers. Nanofiber mats incorporated with EE or CE exhibited visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10), and ammonia vapor. Smart nanofibers have demonstrated the ability to monitor fish fillet spoilage through visible color changes (ΔE ≥ 3) during storage. Consequently, smart nanofibers produced by the SBS technique, using PCL and anthocyanins from agro-industrial waste, reveal potential as smart packaging materials for food.

Carrageenan-based functional films hybridized with carbon dots and anthocyanins from rose petals for smart food packaging applications

Multifunctional smart biopolymeric films were fabricated using rose petal anthocyanin (RPA) and carrageenan (CAR) doped with rose petal-derived carbon dots (RP-CDs). Response surface-optimized RPA showed the highest total anthocyanins and radical scavenging ability. Produced RP-CD exhibited UV absorption and high fluorescence with antibacterial/antioxidant abilities. Enrichment with 2 % RP-CD and 5 % RPA in the CAR matrix results in improved physicochemical, i.e., water contact angle, water vapor permeability, and UV-blocking properties of the fabricated material. Results showed that nanocomposite films scavenged radicals better than the neat CAR films. Zeta potential, FTIR, SEM, and XPS suggested improved compatibility/stability and enhanced elemental configuration of RP-CDs/RPA additives in the CAR polymer matrix. Perishable food packaging (minced pork and shrimp) demonstrated that nanocomposite films work efficiently and non-destructively and are promising tools for monitoring real-time freshness through interpretable visual changes from red to yellow. The CAR/RP-CDs/RPA-based nanocomposite indicator films are expected to be applied as various smart packaging materials. These films possess the ability to promptly detect changes in quality, preserve the quality, and prolong the shelf life of packaged foods.

Cellulose nanofiber-based multifunctional composite films integrated with zinc doped-grapefruit peel-based carbon quantum dots

This study aimed to develop a multifunctional active composite film to extend the shelf life of minced pork. The composite film was prepared by incorporating zinc-doped grapefruit peel-derived carbon quantum dots (Zn-GFP-CD) into a cellulose nanofiber (CNF) matrix. The resulting film significantly improved UV-blocking properties from 39.0 % to 85.7 % while maintaining the film transparency. Additionally, the CNF/Zn-GFP-CD5% composite film exhibits strong antioxidant activity with ABTS and DPPH radical scavenging activities of 99.8 % and 77.4 %, respectively. The composite film also showed excellent antibacterial activity against both Gram-negative and Gram-positive bacteria. When used in minced pork packaging, the composite films effectively inhibit bacterial growth, maintaining bacterial levels below 7 Log CFU/g after 15 days and sustaining a red color over a 21-day storage period. Additionally, a significant reduction in the lipid oxidation of the minced pork was observed. These CNF/Zn-GFP-CD composite films have a great potential for active food packaging applications to extend shelf life and maintain the visual quality of packaged meat.

Quantum dots as advanced nanomaterials for food quality and safety applications: A comprehensive review and future perspectives

The importance of food quality and safety lies in ensuring the best product quality to meet consumer demands and public health. Advanced technologies play a crucial role in minimizing the risk of foodborne illnesses, contamination, drug residue, and other potential hazards in food. Significant materials and technological advancements have been made throughout the food supply chain. Among them, quantum dots (QDs), as a class of advanced nanomaterials with unique physicochemical properties, are progressively demonstrating their value in the field of food quality and safety. This review aims to explore cutting-edge research on the different applications of QDs in food quality and safety, including encapsulation of bioactive compounds, detection of food analytes, food preservation and packaging, and intelligent food freshness indicators. Moreover, the modification strategies and potential toxicities of diverse QDs are outlined, which can affect performance and hinder applications in the food industry. The findings suggested that QDs are mainly used in analyte detection and active/intelligent food packaging. Various food analytes can be detected using QD-based sensors, including heavy metal ions, pesticides, antibiotics, microorganisms, additives, and functional components. Moreover, QD incorporation aided in improving the antibacterial and antioxidant activities of film/coatings, resulting in extended shelf life for packaged food. Finally, the perspectives and critical challenges for the productivity, toxicity, and practical application of QDs are also summarized. By consolidating these essential aspects into this review, the way for developing high-performance QD-based nanomaterials is presented for researchers and food technologists to better capitalize upon this technology in food applications.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

Development of a chitosan and whey protein-based, biodegradable, colorimetric/fluorescent dual-channel monitoring label for real-time sensing of shrimp freshness

To address the growing and urgent need for quick and accurate food spoilage detection systems as well as to reduce food resource wastage, recent research has focused on intelligent bio-labels using pH indicators. Accordingly, we developed a dual-channel intelligent label with colorimetric and fluorescent capabilities using black lycium anthocyanin (BLA) and 9,10-bis(2,2-dipyridylvinyl) anthracene (DSA4P) as colorimetric and fluorescent indicators within a composite film consisting of chitosan (Cs), whey protein (Wp), and sodium tripolyphosphate (STPP). The addition of STPP as a cross-linking agent significantly improved the hydrophobicity, mechanical properties, and thermal stability of the Cs/Wp composite films under low pH conditions. After the incorporation of BLA and DSA4P, the resulting dual-channel intelligent label (Cs/Wp/STPP/BLA/DSA4P) exhibited superior hydrophobicity, as indicated by a water contact angle of 78.03°. Additionally, it displayed enhanced mechanical properties, with a tensile strength (TS) of 3.04 MPa and an elongation at break (EAB) of 81.07 %, while maintaining a low transmittance of 28.48 % at 600 nm. After 25 days of burial in soil, the label was significantly degraded, which showcases its eco-friendly nature. Moreover, the label could visually detect color changes indicating volatile ammonia concentrations (25-25,000 ppm). The color of the label in daylight gradually shifted from brick-red to light-red, brownish-yellow, and finally light-green as the ammonia concentration increased. Correspondingly, its fluorescence transitioned from no fluorescence to green fluorescence with increasing ammonia concentration, gradually intensifying under 365-nm UV light. Furthermore, the label effectively monitored the freshness of shrimp stored at temperatures of 4 °C, 25 °C, and - 18 °C. Thus, the label developed in this study exhibits significant potential for enhancing food safety monitoring.

Carrageenan-based active and intelligent packaging films integrated with anthocyanin and TiO2-doped carbon dots derived from sweet potato peels

Carrageenan-based sustainable active and pH-dependent color-changing composite films were fabricated by blending anthocyanin extracted from sweet potato peel (SPA) with TiO2-doped carbon dots (Ti-CDs) prepared using the biowaste of SPA extraction. The SPA and Ti-CDs were compatible with the carrageenan matrix and were uniformly dispersed in the used polymer to form a homogeneous film with increased mechanical properties. The composite film added with SPA and 3 wt% Ti-CD showed 100 % UV protection, superb antioxidant (100 % DPPH and ABTS scavenging assay), and potent antibacterial activity (complete eradication of foodborne L.monocytogenes and E. coli strains after 3 h incubation). Additionally, the composite films showed distinguishable colorimetric responses to pH 7-12 buffers and volatile ammonia. The intelligent sensing ability of the composite film was assessed through shrimp freshness monitoring, and the film's hue shifted from pink (fresh shrimp) to yellow/brown (inedible shrimp) during storage. Shrimp packaging studies have shown that composite films retard the rate of food quality change during storage and are a good indicator of shrimp spoilage. Therefore, the designed film is expected to have high applicability as a chip, and quick on-site sensor that detects seafood quality in real-time, and a highly effective multifunctional film for better product quality preservation.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

Highly ammonia-responsive starch/PVA film with gas absorption system as the 'bridge' for visually spoilage monitoring of animal-derived food

In the context of food waste and human diseases caused by food pollution, color renderement intelligent packaging came into being. Improving its indicator stability and sensitivity is essential for application. On the basis of our previous work, corn starch/polyvinyl alcohol was used as the matrix, the synthesized zirconium-based UiO-66 and anthocyanin-loaded ovalbumin-carboxymethylcellulose nanocomposites were embedded in to stabilize anthocyanins and improve gas adsorption performance of film. The study found that incorporating appropriate amount of UiO-66 (3%) in films resulted in uniform distribution and formation of holes. Mechanical properties, water stability and barrier properties were significantly improved, and gas adsorption capacity increased by approximately 10 times. More crucially, films that incorporate UiO-66 can react more quickly and visibly to lower concentrations of ammonia gas. The color change of SP/OVA-CMC-ACNs/3% UiO-66 film was noticeable (from purple to gray and then to green) when applied to monitor freshness of shrimp and pork.

Recent advances in biomacromolecule-based nanocomposite films for intelligent food packaging- A review

In food packaging, biopolymer films are biodegradable films made from biomacromolecule-based natural materials, while biocomposite films are hybrids of two or more materials, with at least one being biodegradable. Bionanocomposites are different than the earlier ones, as they consist of various nanofillers (both natural and inorganic) in combination with biomacromolecule-based biodegradable materials to make good compostable bionanocomposites. In this regard, a new type of material known as bionanocomposite has been recently introduced to improve the properties and performance of biocomposite films. Bionanocomposites are primarily developed for active packaging, but their use in intelligent packaging is also noteworthy. For example, bionanocomposites developed using a hybrid of anthocyanin and carbon dots as intelligent materials have shown their high pH-sensing properties. The natural nanofillers (like nanocellulose, nanochitosan, nanoliposome, cellulose nanocrystals, cellulose nanofibers, etc.) are being employed to promote the sustainability, degradability and safety of bionanocomposites. Overall, this article comprehensively reviews the latest innovations in bionanocomposite films for intelligent food packaging over the past five years. In addition to packaging aspects, the role of nanofillers, the importance of life cycle assessment (LCA) and risk assessment, associated challenges, and future perspectives of bionanocomposite intelligent films are also discussed.

Crosslinked fish scale gelatin/alginate dialdehyde functional films incorporated with carbon dots derived from pomelo peel waste for active food packaging

A multifunctional and environmentally friendly composite film was developed by incorporating pomelo peel-derived carbon dots (PCDs) into a fish scale gelatin (FSG)/alginate dialdehyde (ADA) biopolymer matrix. ADA was used to reinforce the physicomechanical properties of the FSG film via Schiff base crosslinking. PCDs with strong antioxidant and antimicrobial activities were synthesized via a hydrothermal method. The effect of various PCDs content on the surface morphological, physicochemical, and functional characteristics of the composite films was investigated. The results showed that the introduction of PCDs into the FSG/ADA matrix effectively reinforced the mechanical performance, enhanced the water vapor and water resistance, increased UV-light blocking, conferred fluorescence properties, and improved the thermal properties of the composite films. Under 3 wt% PCDs content, the FSG/ADA/PCDs-3 % composite film not only presented significant antioxidant capacity with a radical scavenging rate of 91.71 % for DPPH and approximately 100 % for ABTS, but also exhibited excellent antimicrobial ability against bacteria and fungi. Results of a preservation experiment showed that the prepared FSG/ADA/PCDs-3 % film preserved the physiological qualities of strawberries post-harvest and extended their shelf-life to 7 days at room temperature. Overall, the fabricated FSG/ADA/PCDs composite films are promising for use in eco-friendly active food packaging.

Active and Intelligent Biodegradable Packaging Based on Anthocyanins for Preserving and Monitoring Protein-Rich Foods

Currently, active and intelligent packaging has been developed to solve the spoilage problem for protein-rich foods during storage, especially by adding anthocyanin extracts. In such a film system, the antioxidant and antibacterial properties were dramatically increased by adding anthocyanins. The physicochemical properties were enhanced through interactions between the active groups in the anthocyanins and reactive groups in the polymer chains. Additionally, the active and intelligent film could monitor the spoilage of protein-rich foods in response to pH changes. Therefore, this film could monitor the sensory acceptance and extend the shelf life of protein-rich foods simultaneously. In this paper, the structural and functional properties of anthocyanins, composite actions of anthocyanin extracts and biomass materials, and reinforced properties of the active and intelligent film were discussed. Additionally, the applications of this film in quality maintenance, shelf-life extension, and quality monitoring for fresh meat, aquatic products, and milk were summarized. This film, which achieves high stability and the continuous release of anthocyanins on demand, may become an underlying trend in packaging applications for protein-rich foods.

Intelligent packaging based on chitosan/fucoidan incorporated with coleus grass (Plectranthus scutellarioides) leaves anthocyanins and its application in monitoring the spoilage of salmon (Salmo salar L.)

The innovation of this study was to develop a novel biodegradable intelligent packaging based on chitosan/fucoidan combined with different amounts (1, 3 and 5 wt% on chitosan basis) of coleus grass (Plectranthus scutellarioides) leaves anthocyanins (CGL) to monitor the spoilage of salmon (Salmo salar L.). The addition of fucoidan improved the barrier and mechanical properties of the chitosan films (CS) due to hydrogen bonds and intermolecular electrostatic interactions. Moreover, the addition of CGL not only improved the physical properties but also improved the biological activity of chitosan/fucoidan film (CF). The DPPH and ABTS radical scavenging activity of CF contained 5 wt% CGL was 1.83 and 1.75 times than CF, respectively. The inhibition zone size of CF films containing 5 wt% CGL (CF-5%CGL) was approximately 2.04 (Escherichia coli) and 2.16 (Staphylococcus aureus) times higher than that of CF. Moreover, CF-CGL displayed obvious color changes in different pH environments and is highly sensitive to ammonia gas. The CF-CGL has visible color changes during the monitoring of salmon spoilage and extended the shelf life of salmon. According to our findings, CF-CGL film might be employed as a possible intelligent packaging material for monitoring and preserving salmon in the future.

Development of biodegradable active films based on longan seed starch incorporated with banana flower bract anthocyanin extracts and applications in food freshness indication

The recovery of food by-products is of great significance. Food by-products contain diverse materials showing promise for the development of food packaging or edible coatings. In the present study, the effects of banana flower bract anthocyanin extracts (BFBAEs) on properties of longan seed starch (LSS) films were investigated for the first time. The prepared BFBAEs presented great compatibility with LSS matrix without changing the film chemical structures. The LSS films containing BFBAEs presented improved UV light barrier capacities, increased water vapor permeability, and lowered thermal stability compared to the pure LSS films. Additionally, the introduction of BFBAEs significantly reduced tensile strength and increased elongation at break of LSS films. There is growing demands for the fabrication of intelligent films for the visible monitoring of food freshness. BFBAEs imparted great antioxidant activities and pH-sensitive and ammonia-sensitive discoloration capacities on LSS films. LSS/BFBAEs III films were employed to detect food (beef and shrimp) freshness, and distinguishable color variations could be observed as the food freshness reduced. The LSS-based films were almost completely degraded after 30 days. Two types of by-products were combined to develop novel biodegradable active films, which showed promise for the discernible detection of the freshness of perishable foods.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Zero Thermal Quenching Phenomenon of Green Emitting Carbon Dots with High Biocompatibility and Stable Multicolor Biological Imaging in a Hot Environment

Carbon dots are emerging fluorescent nanomaterials with unique physical and chemical properties and a wide range of applications. Herein, we have designed and successfully synthesized thermally stable green emissive nitrogen-doped carbon dots (NCDs) with a photoluminescent quantum yield of 11.32% through facile solvent-free carbonization. NCDs demonstrated zero thermal quenching upon various temperatures modulating from 20 to 80 °C. The green emissive NCDs perform very stably even after heating them at 80 °C for 1 h. The thermal stability mechanism demonstrates that C═O and C═N functional groups control the particle aggregation and protect the fluorescent hub from photo-oxidation and thermal oxidation. Highly biocompatible CDs exhibit bright, stable, and multicolor emissions in T-ca cells under hot circumstances (25-45 °C). Additionally, NCDs offer long-term stability in the biosystem, as evidenced by the fact that the cell retains its brightness about 70% after prolonging the incubation time to 8 days. Furthermore, the fluorescent NCDs are utilized as in vivo imaging agents in the hot environment as they display bright and thermally stable imaging (27-45 °C) under 488 nm excitation. The results confirmed that the produced thermally stable NCDs could be used in biology and related medical fields that require hot environment imaging.

Gelatin/poly(vinyl alcohol)-based dual functional composite films integrated with metal-organic frameworks and anthocyanin for active and intelligent food packaging

Innovative active and pH-colorimetric composite films were fabricated from gelatin/poly(vinyl alcohol) (Gel/PVA) integrated with copper-based metal-organic frameworks (Cu-MOFs) and red cabbage anthocyanin (RCA). The incorporation of Cu-MOFs improved the tensile strength, water resistance, and UV shielding properties of the developed composite films. The addition of anthocyanins and 3 wt% Cu-MOFs endowed the polymer matrix with excellent antioxidant (100 % against ABTS and DPPH radicals) and antibacterial (against Gram-positive and Gram-negative foodborne pathogenic bacteria) functions. The fabricated composite films exhibited significant color change at alkaline conditions of pH 7-12 and a marked color change upon exposure to ammonia. The designed indicator films used for shrimp freshness tracking and a visual color change from pink (for fresh shrimp) to green (for spoiled shrimp) was observed during storage at 28 °C for 24 h. The potential applications of the engineered composite films were studied by shrimp packaging, and the quality parameters of packaged samples were monitored during storage. The synergistic effects of adding anthocyanins and MOF nanostructures works for better product freshness preservation and responds well to shrimp spoilage level, introducing novel active and intelligent packaging options for practical smart packaging applications.

Nano and Technological Frontiers as a Sustainable Platform for Postharvest Preservation of Berry Fruits

Berries are highly perishable and susceptible to spoilage, resulting in significant food and economic losses. The use of chemicals in traditional postharvest protection techniques can harm both human health and the environment. Consequently, there is an increasing interest in creating environmentally friendly solutions for postharvest protection. This article discusses various approaches, including the use of "green" chemical compounds such as ozone and peracetic acid, biocontrol agents, physical treatments, and modern technologies such as the use of nanostructures and molecular tools. The potential of these alternatives is evaluated in terms of their effect on microbial growth, nutritional value, and physicochemical and sensorial properties of the berries. Moreover, the development of nanotechnology, molecular biology, and artificial intelligence offers a wide range of opportunities to develop formulations using nanostructures, improving the functionality of the coatings by enhancing their physicochemical and antimicrobial properties and providing protection to bioactive compounds. Some challenges remain for their implementation into the food industry such as scale-up and regulatory policies. However, the use of sustainable postharvest protection methods can help to reduce the negative impacts of chemical treatments and improve the availability of safe and quality berries.