Occupational dermal exposure to nanoparticles and nano-enabled products: Part I—Factors affecting skin absorption

Exposure to gallium arsenide nanoparticles in a research facility: a case study using molecular beam epitaxy

We evaluated GaAs nanoparticle-concentrations in the air and on skin and surfaces in a research facility that produces thin films, and to monitored As in the urine of exposed worker. The survey was over a working week using a multi-level approach. Airborne personal monitoring was implemented using a miniature diffusion size classifier (DiSCMini) and IOM sampler. Environmental monitoring was conducted using the SKC Sioutas Cascade Impactor to evaluate dimensions and nature of particles collected. Surfaces contamination were assessed analyzing As and Ga in ghost wipes. Skin contamination was monitored using tape strips. As and Ga were analyzed in urines collected every day at the beginning and end of the shift. The greatest airborne exposure occurred during the cutting operations of the GaAs Sample (88883 np/cm3). The highest levels of contamination were found inside the hood (As max = 1418 ng/cm2) and on the laboratory floor (As max = 251 ng/cm2). The average concentration on the worker's skin at the end of the work shift (3.36 ng/cm2) was more than 14 times higher than before the start of the shift. In weekly urinary biomonitoring an average As concentration of 19.5 µg/L, which was above the Società Italiana Valori di Riferimento (SIVR) reference limit for the non-occupational population (2.0 - 15 µg/L), but below the ACGIH limit (30 µg/L). Overall, airborne monitoring, surface sampling, skin sampling, and biomonitoring of worker confirmed the exposure to As of workers. Systematic cleaning operations, hood implementation and correct PPE management are needed to improve worker protection.

Hand eczema and skin complaints in particulate matter-exposed occupations - firefighters, chimney sweepers, and ferrosilicon smelter workers in Norway

BACKGROUND

The objective was to investigate self-reported hand eczema, and skin complaints at other skin locations among workers exposed to particulate matter, especially ultrafine particles.

METHOD

We conducted a cross-sectional study on workers from one ferro-silicon smelter plant, eight chimney sweeper stations and one firefighter station across Norway. Participants answered an extended version of the Nordic Occupational Skin Questionnaire (NOSQ-2022), with additional questions about whole-body skin complaints and visible dust deposition. Results are presented as descriptive data using firefighters as reference group. Odds ratio (OR) was calculated using logistic regression on lifetime prevalence of hand eczema adjusted for potential confounders and mediators. P-values were calculated using likelihood ratio test against the crude OR.

RESULTS

A total of 186 participants answered the questionnaire: 74 chimney sweepers, 52 firefighters and 60 smelter workers. Participation rate was 95.0, 94.5 and 63.6%, respectively. Lifetime prevalence of hand eczema was 9.5, 9.6, and 28.3%, respectively. The point prevalence of hand eczema was 1.4, 1.9 and 10.0%, respectively. We estimated OR for lifetime hand eczema in smelter workers to 4.36 [95% CI: 1.31-14.43, p = 0.016] and for lifetime skin complaints in other locations to 2.25 [95% CI: 0.98-5.18, p = 0.058]. The lifetime prevalence of skin complaints at other locations was 18.9, 23.1 and 40.0%, respectively. The point prevalence was 14.9, 9.6 and 16.7%, respectively. These estimates were not statistically significant but indicates that smelter workers have more skin complaints also at other locations.

CONCLUSION

This study reports a more than four-fold increased risk of hand eczema in smelter workers, and possibly a higher risk of skin complaints in other body locations, compared to the other occupations. Longitudinal studies with larger population are needed to verify the marked increased risk of eczema among smelters and establish causation.

A systematic review of the impacts of exposure to micro- and nano-plastics on human tissue accumulation and health

Micro- and nano-plastics (MNPs) pollution has become a pressing global environmental issue, with growing concerns regarding its impact on human health. However, evidence on the effects of MNPs on human health remains limited. This paper reviews the three routes of human exposure to MNPs, which include ingestion, inhalation, and dermal contact. It further discusses the potential routes of translocation of MNPs in human lungs, intestines, and skin, analyses the potential impact of MNPs on the homeostasis of human organ systems, and provides an outlook on future research priorities for MNPs in human health. There is growing evidence that MNPs are present in human tissues or fluids. Lab studies, including in vivo animal models and in vitro human-derived cell cultures, revealed that MNPs exposure could negatively affect human health. MNPs exposure could cause oxidative stress, cytotoxicity, disruption of internal barriers like the intestinal, the air-blood and the placental barrier, tissue damage, as well as immune homeostasis imbalance, endocrine disruption, and reproductive and developmental toxicity. Limitedly available epidemiological studies suggest that disorders like lung nodules, asthma, and blood thrombus might be caused or exacerbated by MNPs exposure. However, direct evidence for the effects of MNPs on human health is still scarce, and future research in this area is needed to provide quantitative support for assessing the risk of MNPs to human health.

Microfluidic-based skin-on-chip systems for safety assessment of nanomaterials

The skin is the body's largest organ, continuously exposed to and affected by natural and anthropogenic nanomaterials (materials with external and internal dimensions in the nanoscale range). This broad spectrum of insults gives rise to irreversible health effects (from skin corrosion to cancer). Organ-on-chip systems can recapitulate skin physiology with high fidelity and potentially revolutionize the safety assessment of nanomaterials. Here, we review current advances in skin-on-chip models and their potential to elucidate biological mechanisms. Further, strategies are discussed to recapitulate skin physiology on-chip, improving control over nanomaterials exposure and transport across cells. Finally, we highlight future opportunities and challenges from design and fabrication to acceptance by regulatory bodies and industry.

Pharmacokinetics and tumor delivery of nanoparticles

Nanoparticles (NPs) have been widely used in different areas, including consumer products and medicine. In terms of biomedical applications, NPs or NP-based drug formulations have been extensively investigated for cancer diagnostics and therapy in preclinical studies, but the clinical translation rate is low. Therefore, a thorough and comprehensive understanding of the pharmacokinetics of NPs, especially in drug delivery efficiency to the target therapeutic tissue tumor, is important to design more effective nanomedicines and for proper assessment of the safety and risk of NPs. This review article focuses on the pharmacokinetics of both organic and inorganic NPs and their tumor delivery efficiencies, as well as the associated mechanisms involved. We discuss the absorption, distribution, metabolism, and excretion (ADME) processes following different routes of exposure and the mechanisms involved. Many physicochemical properties and experimental factors, including particle type, size, surface charge, zeta potential, surface coating, protein binding, dose, exposure route, species, cancer type, and tumor size can affect NP pharmacokinetics and tumor delivery efficiency. NPs can be absorbed with varying degrees following different exposure routes and mainly accumulate in liver and spleen, but also distribute to other tissues such as heart, lung, kidney and tumor tissues; and subsequently get metabolized and/or excreted mainly through hepatobiliary and renal elimination. Passive and active targeting strategies are the two major mechanisms of tumor delivery, while active targeting tends to have less toxicity and higher delivery efficiency through direct interaction between ligands and receptors. We also discuss challenges and perspectives remaining in the field of pharmacokinetics and tumor delivery efficiency of NPs.

High sensitivity detection of nanoparticles permeation through polymer membranes: A physico-chemical and nuclear imaging measurement approach

Diffusion cells are devices made of donor and acceptor compartments (DC and AC), separated by a membrane. They are widely used in pharmaceutical, cosmetic, toxicology, and protective equipment tests (e.g., gloves) to measure the kinetics of permeants (molecules and nanoparticles) across biological membranes as the skin. However, rarely is the concentration of permeants in the AC measured in continuous or in real-time, and this limitation leads to significant discrepancies in the calculations of kinetic parameters that define the permeation mechanisms. In this study, a diffusion cell compatible with positron emission tomography was used to measure the permeation kinetics of nanoparticles across glove membranes. The technology allows for the measurement of nanoparticle concentration in real-time in the two compartments (DC and AC) and at a detection sensitivity several orders of magnitude higher compared with conventional spectroscopies, thus allowing a much more precise extraction of kinetic parameters. Ultra-small (<10 nm) gold nanoparticles were used as a model nanoparticle contaminant. They were radiolabeled, and their diffusion kinetics was measured in continuous through latex and nitrile polymer membranes. Permeation profiles were recorded at sub-nanomolar sensitivity and in real-time, thus allowing the high precision extraction of kinetic permeation parameters. The technology, methodology, and data extraction process developed in this work could be applied to measure in real-time the kinetics of diffusion of a whole range of potentially toxic molecules and nanoparticles across polymer membranes, including glove membranes.

Potential Environmental and Health Implications from the Scaled-Up Production and Disposal of Nanomaterials Used in Biosensors

Biosensors often combine biological recognition elements with nanomaterials of varying compositions and dimensions to facilitate or enhance the operating mechanism of the device. While incorporating nanomaterials is beneficial to developing high-performance biosensors, at the stages of scale-up and disposal, it may lead to the unmanaged release of toxic nanomaterials. Here we attempt to foster connections between the domains of biosensors development and human and environmental toxicology to encourage a holistic approach to the development and scale-up of biosensors. We begin by exploring the toxicity of nanomaterials commonly used in biosensor design. From our analysis, we introduce five factors with a role in nanotoxicity that should be considered at the biosensor development stages to better manage toxicity. Finally, we contextualize the discussion by presenting the relevant stages and routes of exposure in the biosensor life cycle. Our review found little consensus on how the factors presented govern nanomaterial toxicity, especially in composite and alloyed nanomaterials. To bridge the current gap in understanding and mitigate the risks of uncontrolled nanomaterial release, we advocate for greater collaboration through a precautionary One Health approach to future development and a movement towards a circular approach to biosensor use and disposal.

Neurotoxicity of Engineered Nanomaterials: Testing Considerations

As with toxicology in general, major challenges have emerged in its subfield neurotoxicology regarding the testing of engineered nanomaterials (ENM). This is on the one hand due to their complex physicochemical properties, like size, specific surface area, chemical composition as well as agglomeration and dissolution behavior in biological environments. On the other hand, toxicological risk assessment has faced an increasing demand for the development and implementation of non-animal alternative approaches. Regarding the investigation and interpretation of the potential adverse effects of ENM on the brain, toxicokinetic data are relatively scarce and thus hampers dose selection for in vitro neurotoxicity testing. Moreover, recent in vivo studies indicate that ENM can induce neurotoxic and behavioral effects in an indirect manner, depending on their physicochemical properties and route of exposure. Such indirect effects on the brain may proceed through the activation and spill-over of inflammatory mediators by ENM in the respiratory tract and other peripheral organs as well via ENM induced disturbance of the gut microbiome and intestinal mucus barrier. These ENM specific aspects should be incorporated into the ongoing developments of advanced in vitro neurotoxicity testing methods and strategies.

Transdermal permeation of inorganic cerium salts in intact human skin

The stratum corneum protects the body against external agents, such as metals, chemicals, and toxics. Although it is considered poorly permeable to them, comprising the major barrier to the permeation of such substances, it may become a relevant gate of entry for such molecules. Cerium (Ce) is a lanthanide that is widely used in catalytic, energy, biological and medicinal applications, owing to its intrinsic structural and unique redox properties. Cerium salts used to produce cerium oxide (CeO₂) nanostructures can potentially come into contact with the skin and be absorbed following dermal exposure. The objective of this study was to investigate the percutaneous absorption of three inorganic Ce salts: cerium (III) chloride (CeCl₃); cerium (III) nitrate (Ce(NO₃)₃) and ammonium cerium (IV) nitrate (Ce(NH₄)₂(NO₃)₆), which are commonly adopted for the synthesis of CeO₂ using in vitro - ex vivo technique in Franz diffusion cells. The present work shows that Ce salts cannot permeate intact human skin, but they can penetrate significantly in the epidermis (up to 0.29 μg/cm²) and, to a lesser extent in dermis (up to 0.11 μg/cm²). Further studies are required to evaluate the potential effects of long-term exposure to Ce.

Assessment of dermal absorption of beryllium and copper contained in temple tips of eyeglasses

Dermal exposure to hazardous substances such as chemicals, toxics, metallic items and other contaminants may present substantial danger for health. Beryllium (Be) is a hazardous metal, especially when inhaled and/or in direct contact with the skin, associated with chronic beryllium disease (CBD) and Be sensitization (BeS). The objective of this study was to investigate the percutaneous penetration of beryllium and copper contained in metallic items as eyeglass temple tips (specifically BrushCAST® Copper Beryllium Casting Alloys containing Be 0.35 < 2.85%; Cu 95.3-98.7%), using Franz diffusion cells. This work demonstrated that the total skin absorption of Cu was higher (8.86%) compared to Be (4.89%), which was expected based on the high percentage of Cu contained in the eyeglass temple tips. However, Be accumulated significantly in the epidermis and dermis (up to 0.461 µg/cm²) and, to a lesser extent, in the stratum corneum (up to 0.130 µg/cm²) with a flux of permeation of 3.52 ± 4.5 µg/cm²/hour and lag time of 2.3 ± 1.3 h, after cutaneous exposure of temple tip into 1.0 mL artificial sweat for 24 h. Our study highlights the importance of avoiding the use of Be alloys in items following long-term skin contact.

Nanomaterials, a New Challenge in the Workplace

Nanomaterials are a nanotechnological product of increasing importance given the possibilities they offer to improve quality of life and support sustainable development. Safe management of nanomaterials is needed to ensure that this emerging technology has the highest levels of acceptance among different interest groups, including workers. This chapter reviews the current state that presents the different stages of risk management applied to nanomaterials, including standardisation, regulation, risk assessment and risk control. Particularly, the chapter contextualizes the development of nanotechnologies at European level and analyses the scientific evidence available on the risks derived from nanomaterials use. Furthermore, it highlights the required conditions to encourage the responsible development of nanomaterials, as well as reflects on the lack of consensus in terms of approaches and frameworks that could facilitate standardisation adoption, regulatory enforcement and industry intervention concerning nanomaterials.

Quantitative skin exposure assessment of metals: A case study

This article provides guidance into the quantitative risk assessment of skin exposures to metals. The use of wipe sampling methodologies has been shown to be standardised and effective for skin exposure assessment to metals. However, there is a lack of guidance documents and frameworks available to evaluate the level of health risk to workers from skin exposures to metals. Adverse health effects from exposures to metals have been described in the literature (Fernández-Nieto et al. 2006; Herman et al. 2006; Kreiss et al. 1996). Monitoring of workplace exposures typically focuses on the assessment of respiratory exposures. To provide a safe workplace there is a need to ensure all routes of exposure are risk assessed and controlled. The goal of this article was to develop skin (surface) exposure limits to metals, using the construction industry as a test environment, to quantitatively assess worker health risk of skin exposures to metals. This research concluded it was not feasible to establish single quantitative skin exposure limits to metals due to the many assumptions surrounding dermal exposures. A range of acceptable exposure limits are presented.

Nanocarriers for Skin Applications: Where Do We Stand?

Skin penetration of active molecules for treatment of diverse diseases is a major field of research owing to the advantages associated with the skin like easy accessibility, reduced systemic‐derived side effects, and increased therapeutic efficacy. Despite these advantages, dermal drug delivery is generally challenging due to the low skin permeability of therapeutics. Although various methods have been developed to improve skin penetration and permeation of therapeutics, they are usually aggressive and could lead to irreversible damage to the stratum corneum. Nanosized carrier systems represent an alternative approach for current technologies, with minimal damage to the natural barrier function of skin. In this Review, the use of nanoparticles to deliver drug molecules, genetic material, and vaccines into the skin is discussed. In addition, nanotoxicology studies and the recent clinical development of nanoparticles are highlighted to shed light on their potential to undergo market translation.

Contact transfer of engineered nanomaterials in the workplace

This study investigates the potential spread of cadmium selenide quantum dots in laboratory environments through contact of gloves with simulated dry spills on laboratory countertops. Secondary transfer of quantum dots from the contaminated gloves to other substrates was initiated by contact of the gloves with different materials found in the laboratory. Transfer of quantum dots to these substrates was qualitatively evaluated by inspection under ultraviolet illumination. This secondary contact resulted in the delivery of quantum dots to all the evaluated substrates. The amount of quantum dots transferred was quantified by elemental analysis. The residue containing quantum dots picked up by the glove was transferred to at least seven additional sections of the pristine substrate through a series of sequential contacts. These results demonstrate the potential for contact transfer as a pathway for spreading nanomaterials throughout the workplace, and that 7-day-old dried spills are susceptible to the propagation of nanomaterials by contact transfer. As research and commercialization of engineered nanomaterials increase worldwide, it is necessary to establish safe practices to protect workers from the potential for chronic exposure to potentially hazardous materials. Similar experimental procedures to those described herein can be adopted by industries or regulatory agencies to guide the development of their nanomaterial safety programmes.

Physical properties of gold nanoparticles affect skin penetration via hair follicles

Drug penetration through the skin is significant for both transdermal and dermal delivery. One mechanism that has attracted attention over the last two decades is the transport pathway of nanoparticles via hair follicle, through the epidermis, directly to the pilosebaceous unit and blood vessels. Studies demonstrate that particle size is an important factor for drug penetration. However, in order to gain more information for the purpose of improving this mode of drug delivery, a thorough understanding of the optimal physical particle properties is needed. In this study, we fabricated fluorescently labeled gold nanoparticles (GNP) with a tight control over the size and shape. The effect of the particles' physical parameters on follicular penetration was evaluated histologically. We used horizontal human skin sections and found that the optimal size for polymeric particles is 0.25 μm. In addition, shape penetration experiments revealed gold nanostars' superiority over spherical particles. Our findings suggest the importance of the particles' physical properties in the design of nanocarriers delivered to the pilosebaceous unit.

Current understanding of nanoparticle toxicity mechanisms and interactions with biological systems

Nanotechnology is an emerging science involving the manipulation of matter on the nanometer scale.

Sustainable Use of Nanomaterials in Textiles and Their Environmental Impact

At present, nanotechnology is a priority in research in several nations due to its massive capability and financial impact. However, due to the uncertainties and abnormalities in shape, size, and chemical compositions, the existence of certain nanomaterials may lead to dangerous effects on the human health and environment. The present review includes the different advanced applications of nanomaterials in textiles industries, as well as their associated environmental and health risks. The four main textile industry fields using nanomaterials, nanofinishing, nanocoatings, nanofibers, and nanocomposites, are analyzed. Different functional textiles with nanomaterials are also briefly reviewed. Most textile materials are in direct and prolonged contact with our skin. Hence, the influence of carcinogenic and toxic substances that are available in textiles must be comprehensively examined. Proper recognition of the conceivable benefits and accidental hazards of nanomaterials to our surroundings is significant for pursuing its development in the forthcoming years. The conclusions of the current paper are anticipated to increase awareness on the possible influence of nanomaterial-containing textile wastes and the significance of better regulations in regards to the ultimate disposal of these wastes.

Markers of oxidative stress after three days of nanoTiO2 sunscreen use in humans: a pilot study

OBJECTIVE

Recent experimental studies point to a high reactivity of nanoparticles and the potential of sunscreens to penetrate the skin. We measured 20 markers of oxidative stress and inflammation to find out whether skin exposure to nanoTiO₂ sunscreen may elevate the level of the markers in exhaled breath condensate (EBC) and urine of exposed subjects, as was suggested by our earlier study.

METHODS

Six volunteers (3 males and 3 females), with a mean age of 48.0 ± 6.7 years, used commercial sunscreen for three days continuously. The first samples were collected before the test. The second samples were collected on day 4, before the sunscreen was washed off, and the third samples on day 11. The following biomarkers were measured: malondialdehyde, 4-hydroxy-trans-hexenal, 4-hydroxy-trans-nonenal, aldehydes C6-C12, 8-isoProstaglandin F2α, o-tyrosine, 3-chlorotyrosine, 3-nitrotyrosine, 8-hydroxy-2-deoxyguanosine, 8-hydroxyguanosine, 5-hydroxymethyl uracil, and leukotrienes B4, C4, D4, and E4, using liquid chromatography-electrospray ionisation-tandem mass spectrometry.

RESULTS

In the urine, 4-hydroxy-trans-hexenal was significantly higher in post-exposure sample 2, and the same trend was seen in all urinary markers. In EBC, no difference was seen between the mean values of 20 post-test markers as compared with pre-test samples.

CONCLUSION

This study suggests potential side effects of the sunscreen - borderline elevation of markers of oxidative stress/inflammation - which may relate to the absorption of the nanoTiO₂, and the non-significant difference may be explained by the small number of subjects. The effect was not seen in EBC, where nanoTiO₂ was not found. A larger study is needed, as according to our previous study, the beneficial effect of the sunscreen to suppress oxidative stress caused by UV radiation may be questioned.

Impact of occupational dust exposure on dermatologic symptoms among Korean workers

Occupation-related dust exposure is common, especially with increased industrialization. While occupational dust-related health issues caused by inhalation or ingestion have been well studied, only a few studies have examined the dermatologic effects of occupational dust exposure. This study aimed to investigate the association between occupational dust exposure and dermatologic symptoms in Korean workers. Among the large-scale representative data from the fifth Korean Working Conditions Survey, 45,700 workers were selected for study. Occupational dust exposure level was categorized as none, moderate, and severe, and dermatologic symptoms were assessed using a questionnaire on health problems. We analyzed the association between occupational dust exposure and dermatologic symptoms using multivariate logistic regression. Risks of skin problems and work-related skin problems were significantly associated with the level of occupational dust exposure in a dose-dependent manner (odds ratio (95% confidence interval): moderate, 1.51 (1.14-2.01); severe, 2.39 (1.74-3.29) in general skin problems; moderate, 1.72 (1.22-2.42); severe, 3.06 (2.11-4.44) in work-related skin problems). We, thus, demonstrate an association between occupational dust exposure and skin problems. As skin absorption of dust is a major route of dust exposure at the workplace, it is necessary to determine the efficacy of continuous management of occupational dust exposure.

Nanotoxicology: The Need for a Human Touch?

With the ever-expanding number of manufactured nanomaterials (MNMs) under development there is a vital need for nanotoxicology studies that test the potential for MNMs to cause harm to health. An extensive body of work in cell cultures and animal models is vital to understanding the physicochemical characteristics of MNMs and the biological mechanisms that underlie any detrimental actions to cells and organs. In human subjects, exposure monitoring is combined with measurement of selected health parameters in small panel studies, especially in occupational settings. However, the availability of further in vivo human data would greatly assist the risk assessment of MNMs. Here, the potential for controlled inhalation exposures of MNMs in human subjects is discussed. Controlled exposures to carbon, gold, aluminum, and zinc nanoparticles in humans have already set a precedence to demonstrate the feasibility of this approach. These studies have provided considerable insight into the potential (or not) of nanoparticles to induce inflammation, alter lung function, affect the vasculature, reach the systemic circulation, and accumulate in other organs. The need for further controlled exposures of MNMs in human volunteers - to establish no-effect limits, biological mechanisms, and provide vital data for the risk assessment of MNMs - is advocated.

Molecular Mechanisms, Characterization Methods, and Utilities of Nanoparticle Biotransformation in Nanosafety Assessments

It is a big challenge to reveal the intrinsic cause of a nanotoxic effect due to diverse branches of signaling pathways induced by engineered nanomaterials (ENMs). Biotransformation of toxic ENMs involving biochemical reactions between nanoparticles (NPs) and biological systems has recently attracted substantial attention as it is regarded as the upstream signal in nanotoxicology pathways, the molecular initiating event (MIE). Considering that different exposure routes of ENMs may lead to different interfaces for the arising of biotransformation, this work summarizes the nano-bio interfaces and dose calculation in inhalation, dermal, ingestion, and injection exposures to humans. Then, five types of biotransformation are shown, including aggregation and agglomeration, corona formation, decomposition, recrystallization, and redox reactions. Besides, the characterization methods for investigation of biotransformation as well as the safe design of ENMs to improve the sustainable development of nanotechnology are also discussed. Finally, future perspectives on the implications of biotransformation in clinical translation of nanomedicine and commercialization of nanoproducts are provided.

Activation of NLRP3 inflammasome in hepatocytes after exposure to cobalt nanoparticles: The role of oxidative stress

With the increased use of nanomaterials and increased exposure of humans to various nanomaterials, the potential health effects of nanomaterials cannot be ignored. The hepatotoxicity of cobalt nanoparticles (Nano-Co) is largely unknown and the underlying mechanisms remain obscure. The purpose of this study was to exam the hepatotoxicity induced by Nano-Co and its potential mechanisms. Our results showed that exposure of human fetal hepatocytes L02 to Nano-Co caused a dose- and a time-dependent cytotoxicity. Besides the generation of reactive oxygen species (ROS) and mitochondrial reactive oxygen species (mtROS), exposure to Nano-Co also caused activation of NOD-like receptor protein 3 (NLRP3) inflammasome in hepatocytes. After silencing NLRP3, one component of NLRP3 inflammasome, expression by siRNA strategy, we found that upregulation of NLRP3-related proteins was abolished in hepatocytes exposed to Nano-Co. Using antioxidants to scavenge ROS and mtROS, we demonstrated that Nano-Co-induced mtROS generation was related to Nano-Co-induced NLRP3 inflammasome activation. Our findings demonstrated that Nano-Co exposure may promote intracellular oxidative stress damage, and mtROS may mediate the activation of NLRP3 inflammasome in hepatocytes exposed to Nano-Co, suggesting an important role of ROS/NLRP3 pathway in Nano-Co-induced hepatotoxicity. These results provide scientific insights into the hepatotoxicity of Nano-Co and a basis for the prevention and treatment of Nano-Co-induced cytotoxicity.

Survival Mechanisms and Xenobiotic Susceptibility of Keratinocytes Exposed to Metal-Derived Nanoparticles

Metal-derived nanoparticles (Mt-NPs) are increasingly used in cosmetology due to their ultraviolet shielding (titanium dioxide [TiO₂]), antioxidant (cerium dioxide [CeO₂]), and biocidal (silver [Ag]) properties. In the absence of overt toxicity (i.e., cell death), Mt-NPs are considered safe for cosmetic applications. However, there is little understanding about the mechanisms involved in the survival of keratinocytes exposed to subtoxic levels of Mt-NPs. Human keratinocytes (HaCaT) were exposed subacutely to subtoxic concentrations (≤30 μg/mL, 48-72 h) of rutile (r) TiO₂ (cylindrical), CeO₂ (cubic) and Ag (spherical) with a core/hydrodynamic size of <50/<100 nm and >98% purity. Mt-NP uptake was indirectly quantified by changes in the light side scatter, where the kinetics (time/dose-response) suggested that the three types of Mt-NPs were similarly uptaken by keratinocytes. rTiO₂ and CeO₂, but not Ag-NPs, increased autophagy, whose inhibition prompted cell death. No increase in the steady-state levels of reactive oxygen species (ROS) was induced by exposure to any of the Mt-NPs tested. Interestingly, intracellular Ag-NP aggregates observed an increased far-red autofluorescence (≥740 nm em), which has been ascribed to their binding to thiol molecules such as glutathione (GSH). Accordingly, inhibition of GSH synthesis, but not the impairment of oxidized GSH recycling, sensitized keratinocytes to Ag-NPs suggesting that GSH homeostasis, and its direct scavenging of Ag-NPs, but not ROS, is essential for keratinocyte survival upon exposure to Ag-NP. rTiO₂ and Ag, but not CeO₂-NPs, compromised metabolic flux (glycolysis and respiration), but ATP levels were unaltered. Finally, we also observed that exposure to Mt-NPs sensitized keratinocytes to non-UV xenobiotic exposure (arsenite and paraquat). Our results demonstrate the differential contribution of autophagy and GSH homeostasis to the survival of human keratinocytes exposed to subtoxic concentrations of Mt-NPs and highlight the increased susceptibility of keratinocytes exposed to Mt-NPs to a second xenobiotic insult.

Metal nanomaterials: Immune effects and implications of physicochemical properties on sensitization, elicitation, and exacerbation of allergic disease

The recent surge in incorporation of metallic and metal oxide nanomaterials into consumer products and their corresponding use in occupational settings have raised concerns over the potential for metals to induce size-specific adverse toxicological effects. Although nano-metals have been shown to induce greater lung injury and inflammation than their larger metal counterparts, their size-related effects on the immune system and allergic disease remain largely unknown. This knowledge gap is particularly concerning since metals are historically recognized as common inducers of allergic contact dermatitis, occupational asthma, and allergic adjuvancy. The investigation into the potential for adverse immune effects following exposure to metal nanomaterials is becoming an area of scientific interest since these characteristically lightweight materials are easily aerosolized and inhaled, and their small size may allow for penetration of the skin, which may promote unique size-specific immune effects with implications for allergic disease. Additionally, alterations in physicochemical properties of metals in the nano-scale greatly influence their interactions with components of biological systems, potentially leading to implications for inducing or exacerbating allergic disease. Although some research has been directed toward addressing these concerns, many aspects of metal nanomaterial-induced immune effects remain unclear. Overall, more scientific knowledge exists in regards to the potential for metal nanomaterials to exacerbate allergic disease than to their potential to induce allergic disease. Furthermore, effects of metal nanomaterial exposure on respiratory allergy have been more thoroughly-characterized than their potential influence on dermal allergy. Current knowledge regarding metal nanomaterials and their potential to induce/exacerbate dermal and respiratory allergy are summarized in this review. In addition, an examination of several remaining knowledge gaps and considerations for future studies is provided.

Comparison of Measurement Methods for Dermal Exposure to Hazardous Chemicals at the Workplace: The SysDEA Project

There is a principal need for more precise methodology with regard to the determination of occupational dermal exposure. The goal of the Systematic analysis of Dermal Exposure to hazardous chemical Agents at the workplace project was therefore to generate scientific knowledge to improve and standardize measurement methods for dermal exposure to chemicals at the workplace. In addition, the comparability of different measurement methods was investigated. Different methods (body sampling by means of coveralls and patches, hand sampling by means of gloves and washing, and head sampling by means of headbands and wiping) were compared. Volunteers repeatedly performed a selection of tasks under standardized conditions in test chambers to increase the reproducibility and decrease variability. The selected tasks were pouring, rolling, spraying, and handling of objects immersed in liquid formulations, as well as dumping and handling objects contaminated with powder. For the chemical analysis, the surrogate test substance Tinopal SWN was analyzed by means of a high-performance liquid chromatographic method using a fluorescence detector. Tinopal SWN was either applied as a solid product in its pure form, or as a low and high viscosity liquid containing Tinopal SWN in dissolved form. To compare the sampling methods with patches and coveralls, the exposure values as measured on the patches were extrapolated to the surface areas of the respective parts of the coverall. Based on this extrapolation approach, using the patch method resulted in somewhat higher exposure values compared to using a coverall for all exposure situations, but the differences were only statistically significant in case of the liquid exposure situations. Using gloves resulted in significantly higher exposure values compared to hand wash for handling immersed objects, rolling, and handling contaminated objects, and slightly higher (not significant) exposure values during pouring and spraying. In the same context, applying wipe sampling resulted in higher exposure values than using a headband, which was at least partly due to extrapolation of the wipe results to the surface area of the headband. No ‘golden standard’ with regard to a preferred measurement method for dermal exposure could be identified from the methods as investigated in the current study.

Redox interactions and genotoxicity of metal-based nanoparticles: A comprehensive review

Nanotechnology is a growing science that may provide several new applications for medicine, food preservation, diagnostic technologies, and sanitation. Despite its beneficial applications, there are several questions related to the safety of nanomaterials for human use. The development of nanotechnology is associated with some concerns because of the increased risk of carcinogenesis following exposure to nanomaterials. The increased levels of reactive oxygen species (ROS) that are due to exposure to nanoparticles (NPs) are primarily responsible for the genotoxicity of metal NPs. Not all, but most metal NPs are able to directly produce free radicals through the release of metal ions and through interactions with water molecules. Furthermore, the increased production of free radicals and the cell death caused by metal NPs can stimulate reduction/oxidation (redox) reactions, leading to the continuous endogenous production of ROS in a positive feedback loop. The overexpression of inflammatory mediators, such as NF-kB and STATs, the mitochondrial malfunction and the increased intracellular calcium levels mediate the chronic oxidative stress that occurs after exposure to metal NPs. In this paper, we review the genotoxicity of different types of metal NPs and the redox mechanisms that amplify the toxicity of these NPs.

Current Highlights About the Safety of Inorganic Nanomaterials in Healthcare

:

In recent years inorganic materials are largely present in products intended for health care. Literature gives many examples of inorganic materials used in many healthcare products, mainly in pharmaceutical field.

:

Silver, zinc oxide, titanium oxide, iron oxide, gold, mesoporous silica, hydrotalcite-like compound and nanoclays are the most common inorganic materials used in nanosized form for different applications in the health field. Generally, these materials are employed to realize formulations for systemic use, often with the aim to perform a specific targeting to the pathological site. The nanometric dimensions are often preferred to obtain the cellular internalization when the target is localized in the intracellular space.

:

Some materials are frequently used in topical formulations as rheological agents, adsorbents, mattifying agents, physical sunscreen (e.g. zinc oxide, titanium dioxide), and others.

:

Recent studies highlighted that the use of nanosized inorganic materials can represent a risk for health. The very small dimension (nanometric) until a few years ago represented a fundamental requirement; however, it is currently held responsible for the inorganic material toxicity. This aspect is very important to be considered as actually numerous inorganic materials can be found in many products available in the market, often dedicated to infants and children. These materials are used without taking into account their dimensional properties with increased risk for the user/patient.

:

This review deals with a deep analysis of current researches documenting the toxicity of nanometric inorganic materials especially those largely used in products available in the market.

Evaluation of immunoresponses and cytotoxicity from skin exposure to metallic nanoparticles

Nanotechnology is an interdisciplinary science that has developed rapidly in recent years. Metallic nanoparticles (NPs) are increasingly utilized in dermatology and cosmetology, because of their unique properties. However, skin exposure to NPs raises concerns regarding their transdermal toxicity. The tight junctions of epithelial cells form the skin barrier, which protects the host against external substances. Recent studies have found that NPs can pass through the skin barrier into deeper layers, indicating that skin exposure is a means for NPs to enter the body. The distribution and interaction of NPs with skin cells may cause toxic side effects. In this review, possible penetration pathways and related toxicity mechanisms are discussed. The limitations of current experimental methods on the penetration and toxic effects of metallic NPs are also described. This review contributes to a better understanding of the risks of topically applied metallic NPs and provides a foundation for future studies.

In Vitro Dermal Safety Assessment of Silver Nanowires after Acute Exposure: Tissue vs. Cell Models

Silver nanowires (AgNW) are attractive materials that are anticipated to be incorporated into numerous consumer products such as textiles, touchscreen display, and medical devices that could be in direct contact with skin. There are very few studies on the cellular toxicity of AgNW and no studies that have specifically evaluated the potential toxicity from dermal exposure. To address this question, we investigated the dermal toxicity after acute exposure of polymer-coated AgNW with two sizes using two models, human primary keratinocytes and human reconstructed epidermis. In keratinocytes, AgNW are rapidly and massively internalized inside cells leading to dose-dependent cytotoxicity that was not due to Ag⁺ release. Analysing our data with different dose metrics, we propose that the number of NW is the most appropriate dose-metric for studies of AgNW toxicity. In reconstructed epidermis, the results of a standard in vitro skin irritation assay classified AgNW as non-irritant to skin and we found no evidence of penetration into the deeper layer of the epidermis. The findings show that healthy and intact epidermis provides an effective barrier for AgNW, although the study does not address potential transport through follicles or injured skin. The combined cell and tissue model approach used here is likely to provide an important methodology for assessing the risks for skin exposure to AgNW from consumer products.

Particle release and control of worker exposure during laboratory-scale synthesis, handling and simulated spills of manufactured nanomaterials in fume hoods

Fume hoods are one of the most common types of equipment applied to reduce the potential of particle exposure in laboratory environments. A number of previous studies have shown particle release during work with nanomaterials under fume hoods. Here, we assessed laboratory workers' inhalation exposure during synthesis and handling of CuO, TiO₂ and ZnO in a fume hood. In addition, we tested the capacity of a fume hood to prevent particle release to laboratory air during simulated spillage of different powders (silica fume, zirconia TZ-3Y and TiO₂). Airborne particle concentrations were measured in near field, far field, and in the breathing zone of the worker. Handling CuO nanoparticles increased the concentration of small particles (< 58 nm) inside the fume hood (up to 1 × 10⁵ cm^-3). Synthesis, handling and packaging of ZnO and TiO₂ nanoparticles did not result in detectable particle release to the laboratory air. Simulated powder spills showed a systematic increase in the particle concentrations inside the fume hood with increasing amount of material and drop height. Despite powder spills were sometimes observed to eject into the laboratory room, the spill events were rarely associated with notable release of particles from the fume hood. Overall, this study shows that a fume hood generally offers sufficient exposure control during synthesis and handling of nanomaterials. An appropriate fume hood with adequate sash height and face velocity prevents 98.3% of particles release into the surrounding environment. Care should still be made to consider spills and high cleanliness to prevent exposure via resuspension and inadvertent exposure by secondary routes.

Characterizing workforces exposed to current and emerging non-carbonaceous nanomaterials in the U.S

OBJECTIVE

Toxicology studies suggest that exposure to certain types of engineered nanomaterials (ENMs) may cause adverse health effects, but little is known about the workforce in the United States that produces or uses these materials. In addition, occupational exposure control strategies in this industry are not well characterized. This study identified U.S. ENM manufacturers and users (other than carbon nanotubes and nanofibers, which have been characterized elsewhere), determined workforce size, characterized types and quantities of materials used, occupational exposure control strategies, and the feasibility of occupational ENM exposure studies.

METHODS

Eligible companies were identified and information was collected through phone surveys on nanomaterials produced or used, workforce size, location, work practices, and exposure control strategies. The companies were classified into groups for additional examinations.

RESULTS

Forty-nine companies producing or using ENMs in the U.S. were identified. These companies employed at least 1,500 workers. Most companies produced or used some form of nanoscale metal. More than half of the eligible companies were suppliers for the coatings, composite materials, or general industries. Each company provided information about worker exposure reduction strategies through engineering controls, administrative controls, or personal protective equipment. Production-scale companies reported greater use of specific exposure control strategies for ENMs than laboratory-scale companies.

CONCLUSIONS

Workplaces producing or using ENMs report using engineering and administrative controls as well as personal protective equipment to control worker exposure. Industrywide exposure assessment studies appear feasible due to workforce size. However, more effort must be taken to target industries using specific ENMs based on known toxicological effects and health risks.

Effectiveness of hand washing on the removal of iron oxide nanoparticles from human skin ex vivo

In this study, the effectiveness of washing with soap and water in removing nanoparticles from exposed skin was investigated. Dry, nanoscale hematite (α-Fe₂O₃) or maghemite (γ-Fe₂O₃) powder, with primary particle diameters between 20-30 nm, were applied to two samples each of fresh and frozen ex vivo human skin in two independent experiments. The permeation of nanoparticles through skin, and the removal of nanoparticles after washing with soap and water were investigated. Bare iron oxide nanoparticles remained primarily on the surface of the skin, without penetrating beyond the stratum corneum. Skin exposed to iron oxide nanoparticles for 1 and 20 hr resulted in removal of 85% and 90%, respectively, of the original dose after washing. In the event of dermal exposure to chemicals, removal is essential to avoid potential local irritation or permeation across skin. Although manufactured at an industrial scale and used extensively in laboratory experiments, limited data are available on the removal of engineered nanoparticles after skin contact. Our finding raises questions about the potential consequences of nanoparticles remaining on the skin and whether alternative washing methods should be proposed. Further studies on skin decontamination beyond use of soap and water are needed to improve the understanding of the potential health consequences of dermal exposure to nanoparticles.

Occupational dermal exposure to nanoparticles and nano-enabled products: Part 2, exploration of exposure processes and methods of assessment

Over the past decade, the primary focus of nanotoxicology and nanoenvironmental health and safety efforts has been largely on inhalation exposure to engineered nanomaterials, at the production stage, and much less on considering risks along the life cycle of nano-enabled products. Dermal exposure to nanomaterials and its health impact has been studied to a much lesser extent, and mostly in the context of intentional exposure to nano-enabled products such as in nanomedicine, cosmetics and personal care products. How concerning is dermal exposure to such nanoparticles in the context of occupational exposures? When and how should we measure it? In the first of a series of two papers (Larese Filon et al., 2016), we focused our attention on identifying conditions or situations, i.e. a combination of nanoparticle physico-chemical properties, skin barrier integrity, and occupations with high prevalence of skin disease, which deserve further investigation. This second paper focuses on the broad question of dermal exposure assessment to nanoparticles and attempts to give an overview of the mechanisms of occupational dermal exposure to nanoparticles and nano-enabled products and explores feasibility and adequacy of various methods of quantifying dermal exposure to NOAA. We provide here a conceptual framework for screening, prioritization, and assessment of dermal exposure to NOAA in occupational settings, and integrate it into a proposed framework for risk assessment.