Determination of surface heterogeneity of d-mannitol by sessile drop contact angle and finite concentration inverse gas chromatography

Specific surface area of mannitol rather than particle size dominant the dissolution rate of poorly water-soluble drug tablets: A study of binary mixture

The dissolution behavior of tablets, particularly those containing poorly water-soluble drugs, is a critical factor in determining their absorption and therapeutic efficacy. Traditionally, the particle size of excipients has been considered a key property affecting tablet dissolution. However, lurasidone hydrochloride (LH) tablets prepared by similar particle size mannitol, namely M200 (D90 = 209.68 ± 1.42 μm) and 160C (D90 = 195.38 ± 6.87 μm), exhibiting significant differences in their dissolution behavior. In order to find the fundamental influential factors of mannitol influencing the dissolution of LH tablets, the properties (particle size, water content, true density, bulk density, tapped density, specific surface area, circularity, surface free energy, mechanical properties and flowability) of five grades mannitol including M200 and 160C were investigated. Principal component analysis (PCA) was used to establish a relationship between mannitol properties and the dissolution behavior of LH. The results demonstrated that specific surface area (SSA) emerged as the key property influencing the dissolution of LH tablets. Moreover, our investigation based on the percolation theory provided further insights that the SSA of mannitol influences the probability of LH-LH bonding and LH infinite cluster formation, resulting in the different percolation threshold states, then led to different dissolution behaviors. Importantly, it is worth noting that these findings do not invalidate previous conclusions, as reducing particle size generally increases SSA, thereby affecting the percolation threshold and dissolution behavior of LH. Instead, this study provides a deeper understanding of the underlying role played by excipient SSA in the dissolution of drug tablets. This study provides valuable guidance for the development of novel excipients aimed at improving drug dissolution functionality.

Process-Induced Crystal Surface Anisotropy and the Impact on the Powder Properties of Odanacatib

Crystalline active pharmaceutical ingredients with comparable size and surface area can demonstrate surface anisotropy induced during crystallization or downstream unit operations such as milling. To the extent that varying surface properties impacts bulk powder properties, the final drug product performance such as stability, dissolution rates, flowability, and dispersibility can be predicted by understanding surface properties such as surface chemistry, energetics, and wettability. Here, we investigate the surface properties of different batches of Odanacatib prepared through either jet milling or fast precipitation from various solvent systems, all of which meet the particle size specification established to ensure equivalent biopharmaceutical performance. This work highlights the use of orthogonal surface techniques such as Inverse Gas Chromatography (IGC), Brunauer-Emmett-Teller (BET) surface area, contact angle, and X-ray Photoelectron Spectroscopy (XPS) to demonstrate the effect of processing history on particle surface properties to explain differences in bulk powder properties.

Thermal Surface Properties, London Dispersive and Polar Surface Energy of Graphene and Carbon Materials Using Inverse Gas Chromatography at Infinite Dilution

The thermal surface properties of graphenes and carbon materials are of crucial importance in the chemistry of materials, chemical engineering, and many industrial processes.

BACKGROUND

The determination of these surface properties is carried out using inverse gas chromatography at infinite dilution, which leads to the retention volume of organic solvents adsorbed on solid surfaces. This experimental and fundamental parameter actually reflects the surface thermodynamic interactions between injected probes and solid substrates.

METHODS

The London dispersion equation and the Hamieh thermal model are used to quantify the London dispersive and polar surface energy of graphenes and carbon fibers as well their Lewis acid-base constants by introducing the coupling amphoteric constant of materials.

RESULTS

The London dispersive and polar acid-base surface energies, the free energy of adsorption, the polar enthalpy and entropy, and the Lewis acid-base constants of graphenes and carbon materials are determined.

CONCLUSIONS

It is shown that graphene exhibited the highest values of London dispersive surface energy, polar surface energy, and Lewis acid-base constants. The highest characteristics of graphene justify its great potentiality and uses in many industrial applications.

Reviewing the Impact of Powder Cohesion on Continuous Direct Compression (CDC) Performance

The pharmaceutical industry is undergoing a paradigm shift towards continuous processing from batch, where continuous direct compression (CDC) is considered to offer the most straightforward implementation amongst powder processes due to the relatively low number of unit operations or handling steps. Due to the nature of continuous processing, the bulk properties of the formulation will require sufficient flowability and tabletability in order to be processed and transported effectively to and from each unit operation. Powder cohesion presents one of the greatest obstacles to the CDC process as it inhibits powder flow. As a result, there have been many studies investigating potential manners in which to overcome the effects of cohesion with, to date, little consideration of how these controls may affect downstream unit operations. The aim of this literature review is to explore and consolidate this literature, considering the impact of powder cohesion and cohesion control measures on the three-unit operations of the CDC process (feeding, mixing, and tabletting). This review will also cover the consequences of implementing such control measures whilst highlighting subject matter which could be of value for future research to better understand how to manage cohesive powders for CDC manufacture.

Relating Crystal Structure to Surface Properties: A Study on Quercetin Solid Forms

The surface energy and surface chemistry of a crystal are of great importance when designing particles for a specific application, as these will impact both downstream manufacturing processes as well as final product quality. In this work, the surface properties of two different quercetin solvates (quercetin dihydrate and quercetin DMSO solvate) were studied using molecular (synthonic) modeling and experimental techniques, including inverse gas chromatography (IGC) and contact angle measurements, to establish a relationship between crystal structure and surface properties. The attachment energy model was used to predict morphologies and calculate surface properties through the study of their growth synthons. The modeling results confirmed the surface chemistry anisotropy for the two forms. For quercetin dihydrate, the {010} facets were found to grow mainly by nonpolar offset quercetin-quercetin stacking interactions, thus being hydrophobic, while the {100} facets were expected to be hydrophilic, growing by a polar quercetin-water hydrogen bond. For QDMSO, the dominant facet {002} grows by a strong polar quercetin-quercetin hydrogen bonding interaction, while the second most dominant facet {011} grows by nonpolar π-π stacking interactions. Water contact angle measurements and IGC confirmed a greater overall surface hydrophilicity for QDMSO compared to QDH and demonstrated surface energy heterogeneity for both structures. This work shows how synthonic modeling can help in the prediction of the surface nature of crystalline particles and guide the choice of parameters that will determine the optimal crystal form and final morphology for targeted surface properties, for example, the choice of crystallization conditions, choice of solvent, or presence of additives or impurities, which can direct the crystallization of a specific crystal form or crystal shape.

Cleaving Method for Molecular Crystals and Its Application to Calculation of the Surface Free Energy of Crystalline β-d-Mannitol at Room Temperature

Calculation of the surface free energy (SFE) is an important application of the thermodynamic integration (TI) methodology, which was mainly employed for atomic crystals (such as Lennard–Jones or metals). In this work, we present the calculation of the SFE of a molecular crystal using the cleaving technique which we implemented in the LAMMPS molecular dynamics package. We apply this methodology to a crystal of β-d-mannitol at room temperature and report the results for two types of force fields belonging to the GROMOS family: all atoms and united atoms. The results show strong dependence on the type of force field used, highlighting the need for the development of better force fields to model the surface properties of molecular crystals. In particular, we observe that the united-atoms force field, despite its higher degree of coarse graining compared to the all-atoms force field, produces SFE results in better agreement with the experimental results from inverse gas chromatography measurements.

Co-spray dried hydrophobic drug formulations with crystalline lactose for inhalation aerosol delivery

Spray drying is a rapid method for converting a liquid feed into dried particles for inhalation aerosols. Lactose is a major inhalation excipient used in spray-dried (SD) formulations. However, SD powders produced from solutions are usually amorphous hence unstable to moisture. This problem can potentially be minimized by spray drying a suspension (instead of solution) containing crystalline lactose particles and dissolved drugs. In the present study, the suspension formulation containing dissolved budesonide (BUD) or rifampicin (RIF) and suspended lactose crystals in isopropanol alcohol (IPA) were produced. For comparison, powders were also produced from solution formulations containing the same proportions of drug and lactose dissolved in 50:50 IPA/water as controls. These SD powders were stored at 25 °C/60% RH and 40 °C/75% RH for six months. The particulate properties and in vitro dispersion performance were examined at various storage time points. All powders obtained from spray drying of solutions recrystallized after one week of storage at 25 °C/60% RH. In contrast, SD BUD-lactose obtained from suspension did not change until after three-months of storage when the particle size increased gradually with morphology change and yet the crystallinity remained the same as determined by X-ray powder diffraction. For the SD RIF-lactose obtained from suspension, both particulate properties and in vitro powder dispersion performance showed no significant difference before and after storage at both storage conditions. To conclude, this is the first study to show that SD powder formulations obtained from suspensions containing lactose crystals demonstrated superior storage stability performance, which is desirable for inhaled powders.

Surface Energy Mapping of Modified Silica Using IGC Technique at Finite Dilution

The reinforcing silica filler, which can be more than 40% of an elastomer composite, plays a key role to achieve the desired mechanical properties in elastomer vulcanizates. However, the highly hydrophilic nature of silica surface causes silica particle aggregation. It remained a challenge for many tire manufacturers when using silica-filled elastomer compounds. Here, the silica surface energy changes when the surface is modified with coupling or noncoupling silanes; coupling silanes can covalently bond the silica to the elastomers. The surface energy of silica was determined using inverse gas chromatography (IGC) at finite dilution (FD-IGC) and found to be reduced by up to 50% when the silica surface was silanized. The spatial distribution of silica aggregates within the tire matrix is determined by transmission electron microscopy (TEM) and a direct correlation between aggregate size (silica microdispersion) and work of cohesion from IGC is reported, highlighting surface energy and work of cohesion being excellent indicators of the degree of dispersion of silica aggregates.

Selective removal of nicotine from the main stream smoke by using a surface-imprinted polymer monolith as adsorbent

Using molecularly imprinted polymer as a selective adsorbent for gaseous toxicants is a novel attempt. In present work, a nicotine surface-imprinted monolith (MIM) was used for the selective removal of nicotine from smoke. First, the retention capacity and selectivity for this MIM was tested by using it as the stationary phase in gas chromatography and chromatographic conditions optimized. Then, the gas phase adsorption isotherms of MIM were constructed and the adsorption thermodynamics explored. At last, the applicability for MIM in the removal of nicotine in smoke was explored. Results indicated a stronger retention capacity and a higher selectivity of MIM toward the template vapor, with a capacity factor (87.88) and a selectivity factor (10.15) under the optimized conditions. A higher standard adsorption enthalpy change for this MIM toward the template (ΔH_a⁰ = 65.53 kJ mol^-1) than that for the non-imprinted monolith (NIM) column (ΔH_a⁰ = 47.46 kJ mol^-1) was observed. The adsorption isotherm for MIM appears the BET type II shape, while that for the NIM was approximately linear. When this MIM was used as the adsorbent, it exhibited a high performance in the selective removal of nicotine from the main stream smoke, with an adsorption percentage of 99.43%.

Influences of Crystal Anisotropy in Pharmaceutical Process Development

Crystalline materials are of crucial importance to the pharmaceutical industry, as a large number of APIs are formulated in crystalline form, occasionally in the presence of crystalline excipients. Owing to their multifaceted character, crystals were found to have strongly anisotropic properties. In fact, anisotropic properties were found to be quite important for a number of processes including milling, granulation and tableting. An understanding of crystal anisotropy and an ability to control and predict crystal anisotropy are mostly subjects of interest for researchers. A number of studies dealing with the aforementioned phenomena are grounded on over-simplistic assumptions, neglecting key attributes of crystalline materials, most importantly the anisotropic nature of a number of their properties. Moreover, concepts such as the influence of interfacial phenomena in the behaviour of crystalline materials during their growth and in vivo, are still poorly understood. The review aims to address concepts from a molecular perspective, focusing on crystal growth and dissolution. It begins with a brief outline of fundamental concepts of intermolecular and interfacial phenomena. The second part discusses their relevance to the field of pharmaceutical crystal growth and dissolution. Particular emphasis is given to works dealing with mechanistic understandings of the influence of solvents and additives on crystal habit. Furthermore, comments and perspectives, highlighting future directions for the implementation of fundamental concepts of interfacial phenomena in the rational understanding of crystal growth and dissolution processes, have been provided.

A non-invasive method to directly quantify surface heterogeneity of porous materials

It is extremely challenging to measure the variation of pore surface properties in complex porous systems even though many porous materials have widely differing pore surface properties at microscopic levels. The surface heterogeneity results in different adsorption/desorption behaviors and storage capacity of guest molecules in pores. Built upon the conventional Porod's law scattering theory applicable mainly to porous materials with relatively homogeneous matrices, here we develop a generalized Porod's scattering law method (GPSLM) to study heterogeneous porous materials and directly obtain the variation of scattering length density (SLD) of pore surfaces. As SLD is a function of the chemical formula and density of the matrix, the non-invasive GPSLM provides a way to probe surface compositional heterogeneity, and can be applied to a wide range of heterogeneous materials especially, but not limited to, porous media and colloids, using either neutron or X-ray scattering techniques.

Surface Chemistry and Humidity in Powder Electrostatics: A Comparative Study between Tribocharging and Corona Discharge

In the present study, the correlation between surface chemical groups and the electrostatic properties of particulate materials was studied. Glass beads were modified to produce OH-, NH₂-, CN-, and F-functionalized materials. The materials were charged separately both by friction and by conventional corona charging, and the results were compared. The results obtained from both methods indicated that the electrostatic properties are directly related to the surface functional group chemistry, with hydrophobic groups accumulating greater quantities of charge than hydrophilic groups. The fluorine-rich surface accumulated 5.89 times greater charge upon tribocharging with stainless steel than the hydroxyl-rich surface. However, in contrast to the tribocharging method, the charge polarity could not be determined when corona charging was used. Moreover, discharge profiles at different humidity levels (25% RH, 50% RH, and 75% RH) were obtained for each modified surface, which showed that higher humidity facilitates faster charge decay; however, this enhancement is surface chemistry-dependent. By increasing the humidity from 25% RH to 75% RH, the charge relaxation times can be accelerated 1.6 times for fluorine and 12.2 times for the cyano group. These data confirm that surface functional groups may dictate powder electrostatic behavior and account for observed charge accumulation and discharge phenomena.

Label-Free Ferrocene-Loaded Nanocarrier Engineering for In Vivo Cochlear Drug Delivery and Imaging

It is hypothesized that ferrocene (FC)-loaded nanocarriers (FC-NCs) are safe label-free contrast agents for cochlear biodistribution study by transmission electron microscopy (TEM). To test this hypothesis, after engineering, the poly(epsilon-caprolactone)/polyglycolide NCs are tested for stability with various types and ratios of sugar cryoprotectants during freeze-drying. Their physicochemical properties are characterized by UV-visible spectroscopy, dynamic light scattering, Fourier transform infrared spectroscopy, and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDS). The biodistribution of the FC-NCs in the cochlear tissue after intratympanic injection in guinea pigs is visualized by TEM. Auditory brainstem responses are measured before and after 4-day treatments. These FC-NCs have 153.4 ± 8.7 nm, 85.5 ± 11.2%, and -22.1 ± 1.1 mV as mean diameters, percent drug association efficiency, and zeta potential, respectively (n = 3). The incorporation of FC into the NCs is confirmed by Fourier transform infrared spectroscopy and SEM/EDS spectra. Lactose (3:1 ratio, v/v) is the most effective stabilizer after a 12-day study. The administered NCs are visible by TEM in the scala media cells of the cochlea. Based on auditory brainstem response data, FC-NCs do not adversely affect hearing. Considering the electrondense, radioactive, and magnetic properties of iron inside FC, FC-NCs are promising nanotemplate for future inner ear theranostics.

Particle engineering in pharmaceutical solids processing: surface energy considerations

During the past 10 years particle engineering in the pharmaceutical industry has become a topic of increasing importance. Engineers and pharmacists need to understand and control a range of key unit manufacturing operations such as milling, granulation, crystallisation, powder mixing and dry powder inhaled drugs which can be very challenging. It has now become very clear that in many of these particle processing operations, the surface energy of the starting, intermediate or final products is a key factor in understanding the processing operation and or the final product performance. This review will consider the surface energy and surface energy heterogeneity of crystalline solids, methods for the measurement of surface energy, effects of milling on powder surface energy, adhesion and cohesion on powder mixtures, crystal habits and surface energy, surface energy and powder granulation processes, performance of DPI systems and finally crystallisation conditions and surface energy. This review will conclude that the importance of surface energy as a significant factor in understanding the performance of many particulate pharmaceutical products and processes has now been clearly established. It is still nevertheless, work in progress both in terms of development of methods and establishing the limits for when surface energy is the key variable of relevance.

A Holistic Multi Evidence Approach to Study the Fragmentation Behaviour of Crystalline Mannitol

Mannitol is an essential excipient employed in orally disintegrating tablets due to its high palatability. However its fundamental disadvantage is its fragmentation during direct compression, producing mechanically weak tablets. The primary aim of this study was to assess the fracture behaviour of crystalline mannitol in relation to the energy input during direct compression, utilising ball milling as the method of energy input, whilst assessing tablet characteristics of post-milled powders. Results indicated that crystalline mannitol fractured at the hydrophilic (011) plane, as observed through SEM, alongside a reduction in dispersive surface energy. Disintegration times of post-milled tablets were reduced due to the exposure of the hydrophilic plane, whilst more robust tablets were produced. This was shown through higher tablet hardness and increased plastic deformation profiles of the post-milled powders, as observed with a lower yield pressure through an out-of-die Heckel analysis. Evaluation of crystal state using x-ray diffraction/differential scanning calorimetry showed that mannitol predominantly retained the β-polymorph; however x-ray diffraction provided a novel method to calculate energy input into the powders during ball milling. It can be concluded that particle size reduction is a pragmatic strategy to overcome the current limitation of mannitol fragmentation and provide improvements in tablet properties.

An equation to calculate the actual methylene middle parameter as a function of temperature

Methylene middle parameter [Formula: see text] , the product of the methylene group's cross-sectional area ( [Formula: see text] ) and the root square of its dispersive free energy ( [Formula: see text] ), is the key parameter to calculate the dispersive surface components of solids (γs(d)) using inverse gas chromatography (IGC) at different temperatures. The only method reported to calculate [Formula: see text] as a function of temperature is the Dorris-Gray method. However, the conventional values of [Formula: see text] calculated by the Dorris-Gray method depend heavily on theoretical aspects. This paper establishes a novel equation calculating the actual [Formula: see text] as a function of temperature using the latest and most accurate surface parameters of seven successive n-alkanes. The obtained actual [Formula: see text] values are slightly higher those of the conventional [Formula: see text] . At 20°C, the actual [Formula: see text] generates γs(d) values less than those generated using the conventional [Formula: see text] by ∼3%, and this reduction in calculated γs(d) values increases linearly to become ∼5% at 100°C. Therefore, using the new actual [Formula: see text] seems to mitigate the discrepancy between the γs(d) values measured by IGC and those measured by the contact angle method.

Inverse gas chromatography applications: a review

Inverse gas chromatography (IGC) is a versatile, powerful, sensitive and relatively fast technique for characterizing the physicochemical properties of materials. Due to its applicability in determining surface properties of solids in any form such as films, fibres and powders of both crystalline and amorphous structures, IGC became a popular technique for surface characterization, used extensively soon after its development. One of the most appealing features of IGC that led to its popularity among analytical scientists in early years was its similarity in principle to analytical gas chromatography (GC). The main aspect which distinguishes IGC experiments from conventional GC is the role of mobile and stationary phases. Contrary to conventional GC, the material under investigation is placed in the chromatographic column and a known probe vapour is used to provide information on the surface. In this review, information concerning the history, instrumentation and applications is discussed. Examples of the many experiments developed for IGC method are selected and described. Materials that have been analysed include polymers, pharmaceuticals, minerals, surfactants, and nanomaterials. The properties that can be determined using the IGC technique include enthalpy and entropy of sorption, surface energy (dispersive and specific components), work of co/adhesion, miscibility and solubility parameters, surface heterogeneity, glass transition temperature, and specific surface area.

Physicochemical characterization of D-mannitol polymorphs: the challenging surface energy determination by inverse gas chromatography in the infinite dilution region

Nowadays, it is well known that surface interactions play a preponderant role in mechanical operations, which are fundamental in pharmaceutical processing and formulation. Nevertheless, it is difficult to correlate surface behaviour in processes to physical properties measurement. Indeed, most pharmaceutical solids have multiple surface energies because of varying forms, crystal faces and impurities contents or physical defects, among others. In this paper, D-mannitol polymorphs (α, β and δ) were studied through different characterization techniques highlighting bulk and surface behaviour differences. Due to the low adsorption behaviour of β and δ polymorphs, special emphasis has been paid to surface energy analysis by inverse gas chromatography, IGC. Surface energy behaviour has been studied in Henry's domain showing that, for some organic solids, the classical IGC infinite dilution zone is never reached. IGC studies highlighted, without precedent in literature, dispersive surface energy differences between α and β mannitol, with a most energetically active α form with a γ(s)(d) of 74.9 mJ·m⁻². Surface heterogeneity studies showed a highly heterogeneous α mannitol with a more homogeneous β (40.0 mJ·m⁻²) and δ mannitol (40.3 mJ·m⁻²). Moreover, these last two forms behaved similarly considering surface energy at different probe concentrations.

A new method to determine dispersive surface energy site distributions by inverse gas chromatography

A computational model to predict the relative energy site contributions of a heterogeneous material from data collected by finite dilution-inverse gas chromatography (FD-IGC) is presented in this work. The methodology employed a multisolvent system site filling model utilizing Boltzmann statistics, expanding on previous efforts to calculate "experienced energies" at varying coverage, yielding a retention volume distribution allowing calculation of a surface free energy distribution. Surface free energy distributions were experimentally measured for racemic ibuprofen and β-mannitol powders, the energies of each were found in the ranges 43-52 and 40-55 mJ/m(2), respectively, over a surface coverage range of 0-8%. The computed contributions to surface energy values were found to match closely with data collected on macroscopic crystals by alternative techniques (±<1.5 mJ/m(2)).

The accurate measurement of second virial coefficients using self-interaction chromatography: experimental considerations

Measurement of B22, the second virial coefficient, is an important technique for describing the solution behaviour of proteins, especially as it relates to precipitation, aggregation and crystallisation phenomena. This paper describes the best practise for calculating B22 values from self-interaction chromatograms (SIC) for aqueous protein solutions. Detailed analysis of SIC peak shapes for lysozyme shows that non-Gaussian peaks are commonly encountered for SIC, with typical peak asymmetries of 10%. This asymmetry reflects a non-linear chromatographic retention process, in this case heterogeneity of the protein-protein interactions. Therefore, it is important to use the centre of mass calculations for determining accurate retention volumes and thus B22 values. Empirical peak maximum chromatogram analysis, often reported in the literature, can result in errors of up to 50% in B22 values. A methodology is reported here for determining both the mean and the variance in B22 from SIC experiments, includes a correction for normal longitudinal peak broadening. The variance in B22 due to chemical effects is quantified statistically and is a measure of the heterogeneity of protein-protein interactions in solution. In the case of lysozyme, a wide range of B22 values are measured which can vary significantly from the average B22 values.

Effect of processing route on the surface properties of amorphous indomethacin measured by inverse gas chromatography

The aim of this study was to investigate the effect of processing route (i.e., quench cooling and ball milling) on the surface energy heterogeneity and surface chemistry of indomethacin (IMC). Recently developed inverse gas chromatography (IGC) methodology at finite concentrations was employed to determine the surface energy distributions of crystalline, quench cooled and milled IMC samples. Surface properties of crystalline and processed IMC were measurably different as determined by the IGC and other conventional characterization techniques: differential scanning calorimetry and powder X-ray diffraction. Quench cooled IMC was in fully amorphous form. Milled IMC showed no amorphous character by calorimetric or X-ray diffraction studies. It was demonstrated that both processed IMC samples were energetically more active than the crystalline IMC. In particular, milled IMC exhibited a relatively higher dispersive surface energy and higher surface basicity (electron donor capability). This may be attributed to the creation of surface defect sites or exposure of higher energy crystal facets during the milling process. This study confirms that processing route has notable influence on the surface energy distribution and surface acid-base character. IGC was demonstrated as a powerful technique for investigating surface properties of real-world, heterogeneous pharmaceutical materials.

Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography

This Letter reports a technique of measuring polar surface energy distributions of lactose using inverse gas chromatography (IGC). The significance of this study is that the total surface energy distributions can now be characterized by combining the already known dispersive surface energy distribution with polar surface energy distribution determined in this study. The polar surface energy was calculated from the specific free energies for surface interactions with a monopolar basic probe, ethyl acetate, and a monopolar acidic probe, dichloromethane.

Influence of fines on the surface energy heterogeneity of lactose for pulmonary drug delivery

The effects of the blending of lactose fines to the overall adhesion property of coarse alpha-lactose monohydrate carrier particles were investigated. Five samples, three of them commercial samples from DOMO (Lactohale) LH100, LH210, and LH250) whilst the other two are blends of LH210 and LH250, were studied. Characterisation included particle sizing, SEM, PXRD and IGC. Dispersive surface energy gamma(SV)(d) was determined using a finite concentration IGC method to obtain a distribution profile. The gamma(SV)(d) distribution of lactose crystals was found to vary from 40 to 48mJ/m(2). The unmilled coarse crystalline lactose sample (LH100) gamma(SV)(d) was lowest and showed less heterogeneity than the milled sample (LH250). Fines (LH210) were found to have the highest gamma(SV)(d) value. The samples with loaded LH210 were found to have a higher energy than LH100. The amount of LH210 in Blend 1 was not able to decrease surface energy heterogeneity, whereas sample Blend 2 showed adequate loading of fines to obtain a relatively homogeneous surface. Addition of fines resulted in an increase in gamma(SV)(d), suggesting that coarse lactose surfaces were replaced by surfaces of the fines. Increasing the loading of fines may result in a more homogeneous surface energy of lactose particles.