Enhanced stability of horseradish peroxidase encapsulated in acetalated dextran microparticles stored outside cold chain conditions

Particle-Based therapies for antigen specific treatment of type 1 diabetes

Type 1 diabetes mellitus (T1D) is the leading metabolic disorder in children worldwide. Over time, incidence rates have continued to rise with 20 million individuals affected globally by the autoimmune disease. The current standard of care is costly and time-consuming requiring daily injections of exogenous insulin. T1D is mediated by autoimmune effector responses targeting autoantigens expressed on pancreatic islet β-cells. One approach to treat T1D is to skew the immune system away from an effector response by taking an antigen-specific approach to heighten a regulatory response through a therapeutic vaccine. An antigen-specific approach has been shown with soluble agents, but the effects have been limited. Micro or nanoparticles have been used to deliver a variety of therapeutic agents including peptides and immunomodulatory therapies to immune cells. Particle-based systems can be used to deliver cargo into the cell and microparticles can passively target phagocytic cells. Further, surface modification and controlled release of encapsulated cargo can enhance delivery over soluble agents. The induction of antigen-specific immune tolerance is imperative for the treatment of autoimmune diseases such as T1D. This review highlights studies that utilize particle-based platforms for the treatment of T1D.

A predictive mechanistic model of drug release from surface eroding polymeric nanoparticles

Effective drug delivery requires ample dosing at the target tissue while minimizing negative side effects. Drug delivery vehicles such as polymeric nanoparticles (NPs) are often employed to accomplish this challenge. In this work, drug release of numerous drugs from surface eroding polymeric NPs was evaluated in vitro in physiologically relevant pH 5 and neutral buffers. NPs were loaded with paclitaxel, rapamycin, resiquimod, or doxorubicin and made from an FDA approved polyanhydride or from acetalated dextran (Ace-DEX), which has tunable degradation rates based on cyclic acetal coverage (CAC). By varying encapsulate, pH condition, and polymer, a range of distinct drug release profiles were achieved. To model the obtained drug release curves, a mechanistic mathematical model was constructed based on drug diffusion and polymer degradation. The resulting diffusion-erosion model accurately described drug release from the variety of surface eroding NPs. For drug release from varied CAC Ace-DEX NPs, the goodness of fit of the developed diffusion-erosion model was compared to several conventional drug release models. The diffusion-erosion model maintained optimal fit compared to conventional models across a range of conditions. Machine learning was then employed to estimate effective diffusion coefficients for the diffusion-erosion model, resulting in accurate prediction of in vitro release of dexamethasone and 3'3'-cyclic guanosine monophosphate-adenosine monophosphate from Ace-DEX NPs. This predictive modeling has potential to aid in the design of future Ace-DEX formulations where optimized drug release kinetics can lead to a desired therapeutic effect.

Biopolymers and Osmolytes - A Focus towards the Prospects of Stability and Adjuvanticity of Vaccines

‘New-Gen Vaccines’ are grabbing the attention of scientists as they are much suitable for an immune-compromised group of individuals as well as infants. The major drawbacks of these vaccines are lower immunogenicity and instability. The need for a convenient and safe adjuvant is still under exploration. On the other hand, thermal instability leads to the inactivation of the vaccine and becomes detrimental in many cases. Thus, there is a need to incorporate new kinds of excipients into vaccine formulation to enhance the potency/immunogenicity of vaccine antigens and also act as stabilizers. A limited or single excipient in providing the required dual-activity is vital to break the stereotypical usage of the well-entrenched adverse ingredients. In the proposed review, the efficiency of naturally occurring biocompatible carbohydrate polymers and osmolytes and their ‘dual-role’ is briefed. In addition, the information on the possible mechanisms of action of carbohydrate polymers in vaccines as adjuvants and stabilizers are also discussed.

STING agonist-containing microparticles improve seasonal influenza vaccine efficacy and durability in ferrets over standard adjuvant

The current pandemic highlights the need for effective vaccines against respiratory viruses. An ideal vaccine should induce robust and long-lasting responses with high manufacturing scalability. We use an adjuvant comprised of a Stimulator of Interferon Genes (STING) agonist incorporated in a scalable microparticle platform to achieve durable protection against the influenza virus. This formulation overcomes the challenges presented by the cytosolic localization of STING and the hydrophilicity of its agonists. We evaluated a monoaxial formulation of polymeric acetalated dextran microparticles (MPs) to deliver the STING agonist cyclic GMP-AMP (cGAMP) which achieved >10× dose-sparing effects compared to other published work. Efficacy was evaluated in ferrets, a larger animal model of choice for influenza vaccines. cGAMP MPs with recombinant hemagglutinin reduced viral shedding and improved vaccine outcomes compared to a seasonal influenza vaccine. Importantly, sustained protection against a lethal influenza infection was detected a year after a single dose of the vaccine-adjuvant.

Co-Encapsulation of l-Asparaginase and Etoposide in Dextran Nanoparticles for Synergistic Effect in Chronic Myeloid Leukemia Cells

Co-encapsulation of multiple therapeutic drugs in a single nanocarrier has the potential to enable synergistic interactions, increase drug efficacy, and reduce side effects. The enzyme l-asparaginase and the small molecule drug etoposide have a known synergistic effect against selected cancer types. However, both drugs differ significantly in size, molecular weight, and solubility, which often results in challenges when a simultaneous delivery is required. In this study, we present the co-encapsulation of a large hydrophilic enzyme l-asparaginase and the small hydrophobic drug etoposide into a biodegradable, biocompatible, and acid-responsive dextran-based nanoparticle system. These dual drug-loaded nanoparticles show an excellent cellular uptake in chronic myeloid leukemia (CML) K562 cells and a stepwise release of the cytotoxic payloads in a pH-dependent manner. In activity tests, the dual drug-loaded formulation has shown a significant effect on cell viability (down to 31%) compared to those incubated only with l-asparaginase (92%) or etoposide (82%) at a particle concentration of 125 μg∙mL^-1. These results show that the simultaneous co-delivery of these two drugs in K562 cells leads to synergistic cytotoxicity, indicating a great potential for the treatment of CML.

Collagenase-loaded pH-sensitive nanocarriers efficiently remodeled tumor stroma matrixes and improved the enrichment of nanomedicines

The dense extracellular matrix (ECM) in tumor tissue severely hinders the penetration and enrichment of antitumor nanomedicines, which could significantly affect their efficiency. In this study, we used pH-sensitive nanocarriers loaded with collagenase (Col) to remold the tumor microenvironment (TME). Furthermore, we combined the collagenase delivery system with a nanomedicine to improve its penetration and enrichment in the tumor, thereby improving efficacy. We synthesized acetalated dextran (Ace-DEX) with an ideal pH-sensitivity as the carrier material of collagenase. Under mild preparation conditions, collagenase was loaded into Ace-DEX nanoparticles (NPs) with a high loading capacity (>4%) and remained highly active (>90%). Col-carrying NPs (Col-NPs) significantly reduced the tumor collagen content by 15.1%. Pretreatment with Col-NPs increased the accumulation of doxorubicin (DOX)-loaded liposome (DOX-Lipo) in the tumor by 2.8-fold. There were no safety concerns as the Col-NP showed no significant toxicity and reduced Col-induced damage to healthy tissues. Additionally, the number of circulating tumor cells remained unchanged after Col-NP treatment, suggesting no increased risk of tumor metastasis. Because the Col-NP acts essentially independent of the subsequent treatment, it has considerable potential for enhancing many existing delivery systems and drugs for cancer treatment. It may also be used for treating other collagen-related diseases.

Acetalated dextran based nano- and microparticles: synthesis, fabrication, and therapeutic applications

Acetalated dextran (Ac-DEX) is a pH-responsive dextran derivative polymer. Prepared by a simple acetalation reaction, Ac-DEX has tunable acid-triggered release profile. Despite its relatively short research history, Ac-DEX has shown great potential in various therapeutic applications. Furthermore, the recent functionalization of Ac-DEX makes versatile derivatives with additional properties. Herein, we summarize the cutting-edge development of Ac-DEX and related polymers. Specifically, we focus on the chemical synthesis, nano- and micro-particle fabrication techniques, the controlled-release mechanisms, and the rational design Ac-DEX-based of drug delivery systems in various biomedical applications. Finally, we briefly discuss the challenges and future perspectives in the field.

Considerations for Size, Surface Charge, Polymer Degradation, Co-Delivery, and Manufacturability in the Development of Polymeric Particle Vaccines for Infectious Diseases

Vaccines have advanced human health for centuries. To improve upon the efficacy of subunit vaccines they have been formulated into nano/microparticles for infectious diseases. Much progress in the field of polymeric particles for vaccine formulation has been made since the push for a tetanus vaccine in the 1990s. Modulation of particle properties such as size, surface charge, degradation rate, and the co-delivery of antigen and adjuvant has been used. This review focuses on advances in the understanding of how these properties influence immune responses to injectable polymeric particle vaccines. Consideration is also given to how endotoxin, route of administration, and other factors influence conclusions that can be made. Current manufacturing techniques involved in preserving vaccine efficacy and scale-up are discussed, as well as those for progressing polymeric particle vaccines toward commercialization. Consideration of all these factors should aid the continued development of efficacious and marketable polymeric particle vaccines.

Nano- and Microformulations to Advance Therapies for Visceral Leishmaniasis

Visceral leishmaniasis (VL) is a deadly, vector-borne, neglected tropical disease endemic to arid parts of the world and is caused by a protozoan parasite of the genus Leishmania. Chemotherapy is the primary treatment for this systemic disease, and multiple potent therapies exist against this intracellular parasite. However, several factors, such as systemic toxicity, high costs, arduous treatment regimen, and rising drug resistance, are barriers for effective therapy against VL. Material-based platforms have the potential to revolutionize chemotherapy for leishmaniasis by imparting a better pharmacokinetic profile and creating patient-friendly routes of administration, while also lowering the risk for drug resistance. This review highlights promising drug delivery strategies and novel therapies that have been evaluated in preclinical models, demonstrating the potential to advance chemotherapy for VL.

Synergistic drug combinations for a precision medicine approach to interstitial glioblastoma therapy

Glioblastoma (GBM) is a highly aggressive and heterogeneous form of brain cancer. Genotypic and phenotypic heterogeneity drives drug resistance and tumor recurrence. Combination chemotherapy could overcome drug resistance; however, GBM's location behind the blood-brain barrier severely limits chemotherapeutic options. Interstitial therapy, delivery of chemotherapy locally to the tumor site, via a biodegradable polymer implant can overcome the blood-brain barrier and increase the range of drugs available for therapy. Ideal drug candidates for interstitial therapy are those that are potent against GBM and work in combination with both standard-of-care therapy and new precision medicine targets. Herein we evaluated paclitaxel for interstitial therapy, investigating the effect of combination with both temozolomide, a clinical standard-of-care chemotherapy for GBM, and everolimus, a mammalian target of rapamycin (mTOR) inhibitor that modulates aberrant signaling present in >80% of GBM patients. Tested against a panel of GBM cell lines in vitro, paclitaxel was found to be effective at nanomolar concentrations, complement therapy with temozolomide, and synergize strongly with everolimus. The strong synergism seen with paclitaxel and everolimus was then explored in vivo. Paclitaxel and everolimus were separately formulated into fibrous scaffolds composed of acetalated dextran, a biodegradable polymer with tunable degradation rates, for implantation in the brain. Acetalated dextran degradation rates were tailored to attain matching release kinetics (~3% per day) of both paclitaxel and everolimus to maintain a fixed combination ratio of the two drugs. Combination interstitial therapy of both paclitaxel and everolimus significantly reduced GBM growth and improved progression free survival in two clinically relevant orthotopic models of GBM resection and recurrence. This work illustrates the advantages of synchronized interstitial therapy of paclitaxel and everolimus for post-surgical tumor control of GBM.

Nanomaterial-based blood-brain-barrier (BBB) crossing strategies

Increasing attention has been paid to the diseases of central nervous system (CNS). The penetration efficiency of most CNS drugs into the brain parenchyma is rather limited due to the existence of blood-brain barrier (BBB). Thus, BBB crossing for drug delivery to CNS remains a significant challenge in the development of neurological therapeutics. Because of the advantageous properties (e.g., relatively high drug loading content, controllable drug release, excellent passive and active targeting, good stability, biodegradability, biocompatibility, and low toxicity), nanomaterials with BBB-crossability have been widely developed for the treatment of CNS diseases. This review summarizes the current understanding of the physiological structure of BBB, and provides various nanomaterial-based BBB-crossing strategies for brain delivery of theranostic agents, including intranasal delivery, temporary disruption of BBB, local delivery, cell penetrating peptide (CPP) mediated BBB-crossing, receptor mediated BBB-crossing, shuttle peptide mediated BBB-crossing, and cells mediated BBB-crossing. Clinicians, biologists, material scientists and chemists are expected to be interested in this review.

Electrospray for generation of drug delivery and vaccine particles applied in vitro and in vivo

Also known as electrospray, electrohydrodynamic atomization has been used extensively in the last 15 years to develop polymer-based particles for drug delivery in cell and animal models. More recently, novel core-shell, multi-axial, and other electrospray particles have been developed from an array of polymers for a variety of biomedical applications. This review focuses on electrospray as a novel method of particle fabrication for drug delivery, specifically highlighting the applications of these particle systems in cell culture and animal models while also discussing polymers used for particle fabrication. Applications of electrospray particles to treat glioma, ovarian cancer, and breast cancer are reviewed. Additionally, delivery of antibiotics, gene therapy, and bacterial cells formulated in electrospray particles is discussed. Finally, vaccines as well as drug eluting particles for differentiation of stem cells and tissue engineering are highlighted. The article concludes with a discussion of where the future of electrospray technology can go to strengthen its foothold in the biomedical field.

Sustained release of a model water-soluble compound via dry powder aerosolizable acetalated dextran microparticles

Objective: To design and characterize aerosol microparticles (MP) to provide sustained release of the water-soluble compound sulforhodamine B (SRB) and achieve effective aerosol dispersion. Significance: Modulating the release of water-soluble compounds remains a challenge in pulmonary drug delivery. Methods: SRB and water made up an aqueous solution, while acetalated dextran (Ac-Dex) and isopropyl alcohol made up an organic solution. The two solutions were mixed together, and the solution was spray dried to produce MP. MP were characterized for morphology, size, release kinetics, aerosol dispersion, and cellular interactions. Results: Ac-Dex MP exhibited corrugated morphology and aerodynamic diameters from 2.06 to 2.86 μm. MP deposited in all stages of a Next Generation Impactor, with >90% fine particle fraction. MP exhibited encapsulation efficiencies >129% with SRB loading values up to 16.7 μg SRB/mg MP. MP exhibited sustained release of SRB at pH 7 and fast release at pH 5. In vitro experiments showed minimal cytotoxicity, successful uptake of MP in epithelial cells, and no disruption to the integrity of epithelial monolayers. Conclusions: Ac-Dex MP systems demonstrated the ability to provide sustained the release of a water-soluble therapeutic in addition to effective aerosol dispersion for pulmonary applications.

Receptor-mediated Uptake of Folic Acid-functionalized Dextran Nanoparticles for Applications in Photodynamic Therapy

In photodynamic therapy (PDT), photosensitizers and light are used to cause photochemically induced cell death. The selectivity and the effectiveness of the phototoxicity in cancer can be increased by a specific uptake of the photosensitizer into tumor cells. A promising target for this goal is the folic acid receptor α (FRα), which is overexpressed on the surface of many tumor cells and mediates an endocytotic uptake. Here, we describe a polysaccharide-based nanoparticle system suitable for targeted uptake and its photochemical and photobiological characterization. The photosensitizer 5, 10, 15, 20-tetraphenyl-21H, 23H-porphyrine (TPP) was encapsulated in spermine- and acetal-modified dextran (SpAcDex) nanoparticles and conjugated with folic acid (FA) on the surface [SpAcDex(TPP)-FA]. The particles are successfully taken up by human HeLa-KB cells, and a light-induced cytotoxicity is observable. An excess of free folate as the competitor for the FRα-mediated uptake inhibits the phototoxicity. In conclusion, folate-modified SpAcDex particles are a promising drug delivery system for a tumor cell targeted photodynamic therapy.

A microparticle platform for STING-targeted immunotherapy enhances natural killer cell- and CD8+ T cell-mediated anti-tumor immunity

Immunotherapies have significantly improved cancer patient survival, but response rates are still limited. Thus, novel formulations are needed to expand the breadth of immunotherapies. Pathogen associated molecular patterns (PAMPs) can be used to stimulate an immune response, but several pathogen recognition receptors are located within the cell, making delivery challenging. We have employed the biodegradable polymer acetalated dextran (Ace-DEX) to formulate PAMP microparticles (MPs) in order to enhance intracellular delivery. While treatment with four different PAMP MPs resulted in tumor growth inhibition, cyclic GMP-AMP (cGAMP) MPs were most effective. cGAMP MPs showed anti-tumor efficacy at doses 100-1000 fold lower than published doses of soluble cGAMP in two murine tumor models. Treatment with cGAMP MPs resulted in increased natural killer cell numbers in the tumor environment. Immune cell depletion studies confirmed that NK cells were responsible for the anti-tumor efficacy in an aggressive mouse melanoma model. NK cells and CD8⁺ T cells were both required for early anti-tumor function in a triple negative breast cancer model. In summary, cGAMP MP treatment results in NK and T cell-dependent anti-tumor immune response.

Applications of nanotechnology in drug delivery to the central nervous system

In recent years, the researchers and drug designers have given growing attention to new nanotechnology strategies to improve drug delivery to the central nervous system (CNS). Nanotechnology has a great potential to affect the treatment of neurological disorders, mainly Alzheimer's disease, Parkinson's disease, brain tumors, and stroke. With regard to neurodegeneration, several studies showed that nanomaterials have been successfully used for the treatments of CNS disorders. In this regard, nanocarriers have facilitated the targeted delivery of chemotherapeutics resulting in the efficient inhibition of disease progression in malignant brain tumors. Therefore, the most efficacious application of nanomaterials is the use of these substances in the treatment of CNS disease that enhances the overall effect of drug and highlights the importance of nano-therapeutics. This study was conducted to review the evidence on the applications of nanotechnology in designing drug delivery systems with the ability to cross through the blood-brain barrier (BBB) in order to transfer the therapeutic agents to the CNS.

In Vivo and Cellular Trafficking of Acetalated Dextran Microparticles for Delivery of a Host-Directed Therapy for Salmonella enterica Serovar Typhi Infection

Previously we have encapsulated host-directed therapy AR-12 into acetalated dextran (Ace-DEX) microparticles (MPs) to mitigate drug toxicity and passively target phagocytic host cells. Herein, we have improved upon our initial emulsion-based formulation of Ace-DEX MPs encapsulating AR-12 (AR-12/MPs) by improving the drug encapsulation efficiency, evaluating sterilization processes for manufacturing, and understanding cellular and in vivo trafficking of the MPs. By using an alternative solvent system, ethyl acetate, we report an increased encapsulation efficiency of AR-12 while maintaining the pH-responsive degradation kinetics of Ace-DEX MPs. To better manufacture this novel antimicrobial formulation, we sterilized AR-12/MPs by gamma irradiation or ethylene oxide and evaluated their efficacy against intracellular Salmonella enterica serovar Typhi. Sterilized AR-12/MPs resulted in a significant reduction in intracellular bacterial burden compared to Blank/MPs. We also characterized intracellular trafficking of Ace-DEX MPs encapsulating fluorophores, which demonstrated internalization of MPs in endo/lysosomal compartments and time and degradation-rate dependent lysosomal escape into cytosolic compartments. Additionally, in vivo toxicity was mitigated following encapsulation of AR-12, where the maximum tolerated dose of AR-12 was increased compared to soluble treatment via intranasal, intravenous, and intraperitoneal administration routes. Following in vivo trafficking of Ace-DEX MPs via the same routes, intranasal administration demonstrated the highest accumulation in the lungs, liver, and kidneys, which persisted out to 240 h. Overall, we have advanced the formulation of this host-directed therapy and broadened the understanding of Ace-DEX MP delivery.

Investigation of tunable acetalated dextran microparticle platform to optimize M2e-based influenza vaccine efficacy

Influenza places a significant health and economic burden on society. Efficacy of seasonal influenza vaccines can be suboptimal due to poor matching between vaccine and circulating viral strains. An influenza vaccine that is broadly protective against multiple virus strains would significantly improve vaccine efficacy. The highly conserved ectodomain of matrix protein 2 (M2e) and 3'3' cyclic GMP-AMP (cGAMP) were selected as the antigen and adjuvant, respectively, to develop the basis for a potential universal influenza vaccine. The magnitude and kinetics of adaptive immune responses can have great impact on vaccine efficacy. M2e and cGAMP were therefore formulated within acetalated dextran (Ace-DEX) microparticles (MPs) of varying degradation profiles to examine the effect of differential vaccine delivery on humoral, cellular, and protective immunity. All Ace-DEX MP vaccines containing M2e and cGAMP elicited potent humoral and cellular responses in vivo and offered substantial protection against a lethal influenza challenge, suggesting significant vaccine efficacy. Serum antibodies from Ace-DEX MP vaccinated mice also demonstrated cross reactivity against M2e sequences of various viral strains, which indicates the potential for broadly protective immunity. Of all the formulations tested, the slowest-degrading M2e or cGAMP MPs elicited the greatest antibody production, cellular response, and protection against a viral challenge. This indicated the importance of flexible control over antigen and adjuvant delivery. Overall, robust immune responses, cross reactivity against multiple viral strains, and tunable delivery profiles make the Ace-DEX MP platform a powerful subunit vaccine delivery system.

Prevention of Type 1 Diabetes with Acetalated Dextran Microparticles Containing Rapamycin and Pancreatic Peptide P31

Type 1 diabetes (T1D) is a common autoimmune disease with no cure. T1D subjects are dependent on daily exogenous insulin administration, due to the loss of functional insulin-producing β cells. Needed are immunotherapies that prevent and/or treat T1D. One approach of immunotherapy is to administer an autoantigen to selectively tolerize diabetogenic effector T cells without global immunosuppression. To date, however, strategies of antigen-specific immunotherapy are largely ineffective in the clinic. Using an antigen-specific approach, a biodegradable polymeric delivery vehicle, acetalated dextran microparticles (Ace-DEX MPs), is applied and T1D development is prevented through coadministration of the immunosuppressant rapamycin and the diabetogenic peptide P31 (Rapa/P31/MPs), via alterations of both innate and adaptive immunity. Ex vivo, adoptively transferred CD4⁺ T cells exhibit reduced proliferation and an increased ratio of FoxP3⁺ to IFNγ⁺ T cells. In vitro analysis indicates dendritic cells exhibit a less mature phenotype following coculture with Rapa/P31/MPs, which results in reduced CD4⁺ T cell proliferation and proinflammatory cytokine production (IFNγ and IL-2), but promotes PD-1 expression. Together these results demonstrate Ace-DEX MP-based antigen-specific therapy effectively tolerizes diabetogenic CD4⁺ T cells to prevent T1D, thereby demonstrating one of the first successful attempts of T1D prevention using a single-formulation particulate delivery platform.

Tunable degradation of acetalated dextran microparticles enables controlled vaccine adjuvant and antigen delivery to modulate adaptive immune responses

Subunit vaccines are often poorly immunogenic, and adjuvants and/or delivery vehicles, such as polymeric microparticles (MPs), can be used to enhance immune responses. MPs can also be used to understand cell activation kinetics and the significant impact antigen and adjuvant release has on adaptive immune responses. By controlling antigen and adjuvant release, we can determine if it is important to have precise temporal control over release of these elements to optimize the peak and duration of protective immunity and improve vaccine safety profiles. In order to study the effect of tunable adjuvant or antigen delivery on generation of adaptive immunity, we used acetalated dextran (Ace-DEX) MPs. Ace-DEX MPs were used because their tunable degradation can be controlled based on polymer cyclic acetal coverage (CAC). Ace-DEX MPs of varying degradation profiles were used to deliver murabutide or ovalbumin (OVA) as a model adjuvant or antigen, respectively. When murabutide was encapsulated within Ace-DEX MPs to test for controlled adjuvant delivery, fast-degrading MPs exhibited higher humoral and cellular responses in vivo at earlier time points, while slow-degrading MPs resulted in stronger responses at later time points. When OVA was encapsulated within Ace-DEX MPs to test for controlled antigen delivery, fast-degrading MPs induced greater antibody and cytokine production throughout the length of the experiment. This differential response suggests the need for distinct, flexible control over adjuvant or antigen delivery and its impact on immune response modulation.

A robust microparticle platform for a STING-targeted adjuvant that enhances both humoral and cellular immunity during vaccination

Most FDA-approved adjuvants for infectious agents boost humoral but not cellular immunity, and have poorly-understood mechanisms. Stimulator of interferon genes (STING, also known as MITA, MPYS, or ERIS) is an exciting adjuvant target due to its role in cyclic dinucleotide (CDN)-driven anti-viral immunity; however, a major hindrance is STING's cytosolic localization which requires intracellular delivery of its agonists. As a result, STING agonists administered in a soluble form have elicited suboptimal immune responses. Delivery of STING agonists via particle platforms has proven a more successful strategy, but the opportunity for improved formulations and bioactivity remains. In this study we evaluated the adjuvant activity of the potent STING agonist, CDN 3'3'-cGAMP (cGAMP), encapsulated in acid-sensitive acetalated dextran (Ace-DEX) polymeric microparticles (MPs) which passively target antigen-presenting cells for intracellular release. This formulation was superior to all particle delivery systems evaluated and maintained its bioactivity following a sterilizing dose of gamma irradiation. Compared to soluble cGAMP, the Ace-DEX cGAMP MPs enhanced type-I interferon responses nearly 1000-fold in vitro and 50-fold in vivo, caused up to a 104-fold boost in antibody titers, increased Th1-associated responses, and expanded germinal center B cells and memory T cells. Furthermore, the encapsulated cGAMP elicited no observable toxicity in animals and achieved protective immunity against a lethal influenza challenge seven months post-immunization when using CDN adjuvant doses up to 100-fold lower than previous reports. For these reasons, Ace-DEX MP-encapsulated cGAMP represents a potent vaccine adjuvant of humoral and cellular immunity.

Development and physicochemical characterization of acetalated dextran aerosol particle systems for deep lung delivery

Biocompatible, biodegradable polymers are commonly used as excipients to improve the drug delivery properties of aerosol formulations, in which acetalated dextran (Ac-Dex) exhibits promising potential as a polymer in various therapeutic applications. Despite this promise, there is no comprehensive study on the use of Ac-Dex as an excipient for dry powder aerosol formulations. In this study, we developed and characterized pulmonary drug delivery aerosol microparticle systems based on spray-dried Ac-Dex with capabilities of (1) delivering therapeutics to the deep lung, (2) targeting the particles to a desired location within the lungs, and (3) releasing the therapeutics in a controlled fashion. Two types of Ac-Dex, with either rapid or slow degradation rates, were synthesized. Nanocomposite microparticle (nCmP) and microparticle (MP) systems were successfully formulated using both kinds of Ac-Dex as excipients and curcumin as a model drug. The resulting MP were collapsed spheres approximately 1μm in diameter, while the nCmP were similar in size with wrinkled surfaces, and these systems dissociated into 200nm nanoparticles upon reconstitution in water. The drug release rates of the Ac-Dex particles were tuned by modifying the particle size and ratio of fast to slow degrading Ac-Dex. The pH of the environment was also a significant factor that influenced the drug release rate. All nCmP and MP systems exhibited desirable aerodynamic diameters that are suitable for deep lung delivery (e.g. below 5μm). Overall, the engineered Ac-Dex aerosol particle systems have the potential to provide targeted and effective delivery of therapeutics into the deep lung.

Chemically modified inulin microparticles serving dual function as a protein antigen delivery vehicle and immunostimulatory adjuvant

To develop a new subunit vaccine adjuvant, we chemically modified a naturally-occurring, immunostimulatory inulin polysaccharide to produce an acid-sensitive biopolymer (acetalated inulin, Ace-IN). Various hydrophobic Ace-IN polymers were formed into microparticles (MPs) by oil-in-water emulsions followed by solvent evaporation These Ace-IN MPs possessed tunable degradation characteristics that, unlike polyesters used in FDA-approved microparticulate formulations, had only pH-neutral hydrolytic byproducts. Macrophages were passively targeted with cytocompatible Ace-IN MPs. TNF-α production by macrophages treated with Ace-IN MPs could be altered by adjusting the polymers' chemistry. Mice immunized with Ace-IN MPs encapsulating a model ovalbumin (OVA) antigen showed higher production of anti-OVA IgG antibody levels relative to soluble antigen. The antibody titers were also comparable to an alum-based formulation. This proof-of-concept establishes the potential for chemically-modified inulin MPs to simultaneously enable dual functionality as a stimuli-controlled antigen delivery vehicle and immunostimulatory adjuvant.

Acetalated Dextran: A Tunable and Acid-Labile Biopolymer with Facile Synthesis and a Range of Applications

Acetalated dextran (Ac-DEX) is a tunable acid-labile biopolymer with facile synthesis, aptly designed for the formulation of microparticles for vaccines and immune modulation. Tunability of degradation is achieved based on the kinetics of reaction and the molecular weight of the parent dextran polymer. This tunability translated to differential rates of activation of CD8+ T cells in an in vitro ovalbumin model and illustrated that acid-labile polymer can activate CD8+ T cells at an increased rate compared to acid-insensitive polymers. In addition, Ac-DEX has been used to encapsulate small molecules, deliver nucleotides, transport inorganic molecules, formulate immune modulating therapies and vaccines, and trigger pH responsive constructs for therapy. Here we highlight the properties and results of Ac-DEX nano-/microparticles as well as the use of the polymer in other constructs and chemistries.

Acetalated Dextran Microparticulate Vaccine Formulated via Coaxial Electrospray Preserves Toxin Neutralization and Enhances Murine Survival Following Inhalational Bacillus Anthracis Exposure

Subunit formulations are regarded as the safest type of vaccine, but they often contain a protein-based antigen that can result in significant challenges, such as preserving antigenicity during formulation and administration. Many studies have demonstrated that encapsulation of protein antigens in polymeric microparticles (MPs) via emulsion techniques results in total IgG antibody titers comparable to alum formulations, however, the antibodies themselves are non-neutralizing. To address this issue, a coaxial electrohydrodynamic spraying (electrospray) technique is used to formulate a microparticulate-based subunit anthrax vaccine under conditions that minimize recombinant protective antigen (rPA) exposure to harsh solvents and high shear stress. rPA and the adjuvant resiquimod are encapsulated either in separate or the same acetalated dextran MPs. Using a murine model, the electrospray formulations lead to higher IgG2a subtype titers as well as comparable total IgG antibody titers and toxin neutralization relative to the FDA-approved vaccine (BioThrax). BioThrax provides no protection against a lethal inhalational challenge of the highly virulent Ames Bacillus anthracis anthrax strain, whereas 50% of the mice vaccinated with separately encapsulated electrospray MPs survive. Overall, this study demonstrates the potential use of electrospray for encapsulating protein antigens in polymeric MPs.

Degradation of acetalated dextran can be broadly tuned based on cyclic acetal coverage and molecular weight

Microparticles (MPs) derived from acid-sensitive biopolymers enable rapid degradation and cargo release under acidic conditions, such as at tumor microenvironments, within lysosomal/phagosomal compartments inside phagocytic cells, or at sites of inflammation. One such acid-sensitive biopolymer, acetalated dextran (Ace-DEX), has tunable degradation rates and pH-neutral degradation byproducts consisting of dextran, acetone, and ethanol. By studying the degradation profiles of Ace-DEX MPs with varying cyclic acetal coverage (CAC) and dextran molecular weight (MW), we concluded that MPs composed of low CAC or high MW polymer degraded the fastest at both pH 7.4 and 5.0. To further understand the properties of this unique polymer, we encapsulated a model drug resiquimod, which is a toll-like receptor (TLR) 7/8 agonist, into Ace-DEX MPs of different polymer CAC and dextran MW. It was observed that resiquimod was released faster from MPs of lower CAC or higher MW. By evaluating the activation of RAW macrophages cultured with different types of resiquimod-loaded Ace-DEX MPs, we found that MPs of lower CAC or higher MW promoted greater nitrite production and resulted in more robust cell activation. Our results indicate we can precisely control the degradation profile, release kinetics, and bioactivity of encapsulated cargos by altering CAC and MW, furthering Ace-DEX MPs' novelty as a drug carrier.

Saquinavir Loaded Acetalated Dextran Microconfetti - a Long Acting Protease Inhibitor Injectable

PURPOSE

Since the adoption of highly active antiretroviral therapy, HIV disease progression has slowed across the world; however, patients are often required to take multiple medications daily of poorly bioavailable drugs via the oral route, leading to gastrointestinal irritation. Recently, long acting antiretroviral injectables that deliver drug for months at a time have moved into late phase clinical trials. Unfortunately, these solid phase crystal formulations have inherent drawbacks in potential dose dumping and a greater likelihood for burst release of drug compared to polymeric formulations.

METHODS

Using electrospinning, acetalated dextran scaffolds containing the protease inhibitor saquinavir were created. Grinding techniques were then used to process these scaffolds into injectables which are termed saquinavir microconfetti. Microconfetti was analyzed for in vitro and in vivo release kinetics.

RESULTS

Highly saquinavir loaded acetalated dextran electrospun fibers were able to be formed and processed into saquinavir microconfetti while other polymers such as poly lactic-co-glycolic acid and polycaprolactone were unable to do so. Saquinavir microconfetti release kinetics were able to be tuned via drug loading and polymer degradation rates. In vivo, a single subcutaneous injection of saquinavir microconfetti released drug for greater than a week with large tissue retention.

CONCLUSIONS

Microconfetti is a uniquely tunable long acting injectable that would reduce the formation of adherence related HIV resistance. Our findings suggest that the injectable microconfetti delivery system could be used for long acting controlled release of saquinavir and other hydrophobic small molecule drugs.

Host-mediated Leishmania donovani treatment using AR-12 encapsulated in acetalated dextran microparticles

Leishmaniasis is a disease caused by parasites of Leishmania sp., which effects nearly 12 million people worldwide and is associated with treatment complications due to widespread parasite resistance toward pathogen-directed therapeutics. The current treatments for visceral leishmaniasis (VL), the systemic form of the disease, involve pathogen-mediated drugs and have long treatment regimens, increasing the risk of forming resistant strains. One way to limit emergence of resistant pathogens is through the use of host-mediated therapeutics. The host-mediated therapeutic AR-12, which is FDA IND-approved for cancer treatment, has shown activity against a broad spectrum of intracellular pathogens; however, due to hydrophobicity and toxicity, it is difficult to reach therapeutic doses. We have formulated AR-12 into microparticles (AR-12/MPs) using the novel biodegradable polymer acetalated dextran (Ace-DEX) and used this formulation for the systemic treatment of VL. Treatment with AR-12/MPs significantly reduced liver, spleen, and bone marrow parasite loads in infected mice, while combinatorial therapies with amphotericin B had an even more significant effect. Overall, AR-12/MPs offer a unique, host-mediated therapy that could significantly reduce the emergence of drug resistance in the treatment of VL.

Enhanced bioavailability of danazol nanosuspensions by wet milling and high-pressure homogenization

Introduction:

The majority of drugs obtained through synthesis and development show poor aqueous solubility and dissolution velocity, resulting in reduced bioavailability of drugs. Most of these problems arise from formulation-related performance issues, and an efficient way to overcome these obstacles and to increase dissolution velocity is to reduce the particle size of drug substances to form drug nanosuspensions.

Materials and Methods:

Danazol nanosuspensions were prepared by wet milling (WM) and high-pressure homogenization (HPH) methods. The nanosuspensions obtained using these fabrication methods were analyzed for their particle size, surface charge, and the crystallinity of the product was assessed by X-ray diffraction (XRD) and differential scanning calorimetry techniques. To determine in vitro and in vivo performances of the prepared nanosuspensions, dissolution velocity, and bioavailability studies were performed.

Results:

Particle size and zeta potential analysis showed the formation of nanosized particles with a negative charge on the surface. XRD depicted the nanocrystalline nature of danazol with low diffraction intensities. With increased surface area and saturation solubility, the nanosuspensions showed enhanced dissolution velocity and oral bioavailability in rats when compared to the bulk danazol suspension.

Conclusions:

The results suggest that the preparation of nanosuspensions by WM or HPH is a promising approach to formulate new drugs or to reformulate existing drugs with poorly water-soluble properties.

Microparticles formulated from a family of novel silylated polysaccharides demonstrate inherent immunostimulatory properties and tunable hydrolytic degradability

Acid-degradable polymers are well-suited for drug delivery vehicles because numerous physiological sites are acidic.

Stabilization challenges and formulation strategies associated with oral biologic drug delivery systems

Delivery of proteins to mucosal tissues of GI tract typically utilize formulations which protect against proteolysis and target the mucosal tissues. Using case studies from literature and the authors' own work, the in-process stability and solid state storage stability of biopharmaceuticals formulated in delivery systems designed for oral delivery to the GI tract will be reviewed. Among the range of delivery systems, biodegradable polymer systems for protection and controlled release of proteins have been the most studied; hence these systems will be covered in greater depth. These delivery systems include polymeric biodegradable microspheres or nanospheres that contain proteins or vaccines, which are designed to reduce the number of administrations/inoculations and the total protein dose required to achieve the desired biological effect. Specifically, this review will include a landscape survey of the systems that have been studied, the manufacturing processes involved, stability through the manufacturing process, key pharmaceutical formulation parameters that impact stability of the encased proteins, and storage stability of the encapsulated proteins in these delivery systems.

Evaluation of a biodegradable microparticulate polymer as a carrier for Burkholderia pseudomallei subunit vaccines in a mouse model of melioidosis

Melioidosis, a potentially lethal disease of humans and animals, is caused by the soil-dwelling bacterium Burkholderia pseudomallei. Due to B. pseudomallei's classification as a Tier 1 Select Agent, there is substantial interest in the development of an effective vaccine. Yet, despite decades of research, no effective target, adjuvant or delivery vehicle capable of inducing protective immunity against B. pseudomallei infection has been identified. We propose a microparticulate delivery vehicle comprised of the novel polymer acetalated dextran (Ac-DEX). Ac-DEX is an acid-sensitive biodegradable carrier that can be fabricated into microparticles (MPs) that are relatively stable at pH 7.4, but rapidly degrade after phagocytosis by antigen presenting cells where the pH can drop to 5.0. As compared to other biomaterials, this acid sensitivity has been shown to enhance cross presentation of subunit antigens. To evaluate this platform as a delivery system for a melioidosis vaccine, BALB/c mice were vaccinated with Ac-DEX MPs separately encapsulating B. pseudomallei whole cell lysate and the toll-like receptor (TLR) 7/8 agonist resiquimod. This vaccine elicited a robust antibody response that included both Th1 and Th2 immunity. Following lethal intraperitoneal challenge with B. pseudomallei 1026b, vaccinated mice demonstrated a significant delay to time of death compared to untreated mice. The formulation, however, demonstrated incomplete protection indicating that lysate protein offers limited value as an antigen. Nevertheless, our Ac-DEX MPs may offer an effective delivery vehicle for a subunit B. psuedomallei vaccine.

Treatment of experimental autoimmune encephalomyelitis by codelivery of disease associated Peptide and dexamethasone in acetalated dextran microparticles

Multiple sclerosis (MS) is an autoimmune, demyelinating disease of the central nervous system that can cause loss of motor function and is thought to result, in part, from chronic inflammation due to an antigen-specific T cell immune response. Current treatments suppress the immune system without antigen specificity, increasing the risks of cancer, chronic infection, and other long-term side effects. In this study, we show treatment of experimental autoimmune encephalomyelitis (EAE), a model of MS, by coencapsulating the immunodominant peptide of myelin oligodendrocyte glycoprotein (MOG) with dexamethasone (DXM) into acetalated dextran (Ac-DEX) microparticles (DXM/MOG/MPs) and administering the microparticles subcutaneously. The clinical score of the mice was reduced from 3.4 to 1.6 after 3 injections 3 days apart with the coencapsulated microparticulate formulation (MOG 17.6 μg and DXM 8 μg). This change in clinical score was significantly greater than observed with phosphate-buffered saline (PBS), empty MPs, free DXM and MOG, DXM/MPs, and MOG/MPs. Additionally, treatment with DXM/MOG/MPs significantly inhibited disease-associated cytokine (e.g., IL-17, GM-CSF) expression in splenocytes isolated in treated mice. Here we show a promising approach for the therapeutic treatment of MS using a polymer-based microparticle delivery platform.

Tunable protein release from acetalated dextran microparticles: a platform for delivery of protein therapeutics to the heart post-MI

The leading cause of death in the United States is cardiovascular disease. The majority of these cases result from heart failure post-myocardial infarction (MI). We present data providing evidence for use of acetalated dextran (AcDex) microparticles as a delivery vehicle for therapeutics to the heart post-MI. We harnessed the tunable degradation and acid-sensitivity of AcDex in the design of microparticles for intramyocardial injection. The particles released a model protein, myoglobin, and a sensitive growth factor, basic fibroblast growth factor (bFGF), over a wide range of time frames (from days to weeks) based on the percentage of cyclic acetals in the AcDex, which was easily controlled with acetalation reaction time. The release was shown in low pH environments, similar to what is found in an infarcted heart. bFGF maintained activity after release from the microparticles. Finally, biocompatibility of the microparticles was assessed.

Dissolving polymer microneedle patches for rapid and efficient transdermal delivery of insulin to diabetic rats

This study presents a dissolving microneedle patch, composed of starch and gelatin, for the rapid and efficient transdermal delivery of insulin. The microneedles completely dissolve after insertion into the skin for 5 min, quickly releasing their encapsulated payload into the skin. A histological examination shows that the microneedles have sufficient mechanical strength to be inserted in vitro into porcine skin to a depth of approximately 200 μm and in vivo into rat skin to 200-250 μm depth. This penetration depth does not induce notable skin irritation or pain sensation. To evaluate the feasibility of using these dissolving microneedles for diabetes treatment insulin-loaded microneedles were administered to diabetic rats using a homemade applicator. Pharmacodynamic and pharmacokinetic results show a similar hypoglycemic effect in rats receiving insulin-loaded microneedles and a subcutaneous injection of insulin. The relative pharmacological availability and relative bioavailability of insulin were both approximately 92%, demonstrating that insulin retains its pharmacological activity after encapsulation and release from the microneedles. Storage stability analysis confirms that more than 90% of the insulin remained in the microneedles even after storage at 25 or 37°C for 1 month. These results confirm that the proposed starch/gelatin microneedles enable stable encapsulation of bioactive molecules and have great potential for transdermal delivery of protein drugs in a relatively painless, rapid, and convenient manner.

Delivery of host cell-directed therapeutics for intracellular pathogen clearance

Intracellular pathogens present a major health risk because of their innate ability to evade clearance. Their location within host cells and ability to react to the host environment by mutation or transcriptional changes often enables survival mechanisms to resist standard therapies. Host-directed drugs do not target the pathogen, minimizing the potential development of drug resistance; however, they can be difficult to deliver efficiently to intracellular sites. Vehicle delivery of host-mediated response drugs not only improves drug distribution and toxicity profiles, but can reduce the total amount of drug necessary to clear infection. In this article, we will review some host-directed drugs and current drug delivery techniques that can be used to efficiently clear intracellular infections.

Rapid vaccination using an acetalated dextran microparticulate subunit vaccine confers protection against triplicate challenge by bacillus anthracis

PURPOSE

A rapid immune response is required to prevent death from Anthrax, caused by Bacillus anthracis.

METHOD

We formulated a vaccine carrier comprised of acetalated dextran microparticles encapsulating recombinant protective antigen (rPA) and resiquimod (a toll-like receptor 7/8 agonist).

RESULTS

We were able to protect against triplicate lethal challenge by vaccinating twice (Days 0, 7) and then aggressively challenging on Days 14, 21, 28. A significantly higher level of antibodies was generated by day 14 with the encapsulated group compared to the conventional rPA and alum group. Antibodies produced by the co-encapsulated group were only weakly-neutralizing in toxin neutralization; however, survival was not dependent on toxin neutralization, as all vaccine formulations survived all challenges except control groups. Post-mortem culture swabs taken from the hearts of vaccinated groups that did not produce significant neutralizing titers failed to grow B. anthracis.

CONCLUSIONS

Results indicate that protective antibodies are not required for rapid protection; indeed, cytokine results indicate that T cell protection may play a role in protection from anthrax. We report the first instance of use of a particulate carrier to generate a rapid protective immunity against anthrax.