Nebulization of ultradeformable liposomes: The influence of aerosolization mechanism and formulation excipients

Evaluating the photodynamic efficacy of nebulized curcumin-loaded liposomes prepared by thin-film hydration and dual centrifugation: In vitro and in ovo studies

Lung cancer, one of the most common causes of high mortality worldwide, still lacks appropriate and convenient treatment options. Photodynamic therapy (PDT) has shown promising results against cancer, especially in recent years. However, pulmonary drug delivery of the predominantly hydrophobic photosensitizers still represents a significant obstacle. Nebulizing DPPC/Cholesterol liposomes loaded with the photosensitizer curcumin via a vibrating mesh nebulizer might overcome current restrictions. In this study, the liposomes were prepared by conventional thin-film hydration and two other methods based on dual centrifugation. The liposomes' physicochemical properties were determined before and after nebulization, showing that liposomes do not undergo any changes. However, morphological characterization of the differently prepared liposomes revealed structural differences between the methods in terms of lamellarity. Internalization of curcumin in lung adenocarcinoma (A549) cells was visualized and quantified. The generation of reactive oxygen species because of the photoreaction was also proven. The photodynamic efficacy of the liposomal formulations was tested against A549 cells. They revealed different phototoxic responses at different radiant exposures. Furthermore, the photodynamic efficacy was investigated after nebulizing curcumin-loaded liposomes onto xenografted tumors on the CAM, followed by irradiation, and evaluated using positron emission tomography/computed tomography and histological analysis. A decrease in tumor metabolism could be observed. Based on the efficacy of curcumin-loaded liposomes in 2D and 3D models, liposomes, especially with prior film formation, can be considered a promising approach for PDT against lung cancer.

Liposomes for Inhalation

Inhalation of liposomes formulated with phospholipids similar to endogenous lung surfactants and lipids offers biocompatibility and versatility within the pulmonary medicine field to treat a range of diseases such as lung cancer, cystic fibrosis and lung infections. Manipulation of the physicochemical properties of liposomes enables innovative design of the carrier to meet specific delivery, release and targeting requirements. This delivery system offers several benefits: improved pharmacokinetics with reduced toxicity, enhanced therapeutic efficacy, increased delivery of poorly soluble drugs, taste masking, biopharmaceutics degradation protection and targeted cellular therapy. This section provides an overview of liposomal formulation and delivery, together with their applications for different disease states in the lung.

Mucoadhesive Rifampicin-Liposomes for the Treatment of Pulmonary Infection by Mycobacterium abscessus: Chitosan or ε-Poly-L-Lysine Decoration

Mycobacterium abscessus (Mabs) is a dangerous non-tubercular mycobacterium responsible for severe pulmonary infections in immunologically vulnerable patients, due to its wide resistance to many different antibiotics which make its therapeutic management extremely difficult. Drug nanocarriers as liposomes may represent a promising delivery strategy against pulmonary Mabs infection, due to the possibility to be aerosolically administrated and to tune their properties in order to increase nebulization resistance and retainment of encapsulated drug. In fact, liposome surface can be modified by decoration with mucoadhesive polymers to enhance its stability, mucus penetration and prolong its residence time in the lung. The aim of this work is to employ Chitosan or ε-poly-L-lysine decoration for improving the properties of a novel liposomes composed by hydrogenated phosphatidyl-choline from soybean (HSPC) and anionic 1,2-Dipalmitoyl-sn-glycero-3-phosphorylglycerol sodium salt (DPPG) able to entrap Rifampicin. A deep physicochemical characterization of polymer-decorated liposomes shows that both polymers improve mucoadhesion without affecting liposome features and Rifampicin entrapment efficiency. Therapeutic activity on Mabs-infected macrophages demonstrates an effective antibacterial effect of ε-poly-L-lysine liposomes with respect to chitosan-decorated ones. Altogether, these results suggest a possible use of ε-PLL liposomes to improve antibiotic delivery in the lung.

Lessons from the history of inorganic nanoparticles for inhalable diagnostics and therapeutics

The respiratory tract is one of the most accessible ones to exogenous nanoparticles, yet drug delivery by their means to it is made extraordinarily challenging because of the plexus of aerodynamic, hemodynamic and biomolecular factors at cellular and extracellular levels that synergistically define the safety and efficacy of this process. Here, the use of inorganic nanoparticles (INPs) for inhalable diagnostics and therapies of the lung is viewed through the prism of the history of studies on the interaction of INPs with the lower respiratory tract. The most conceptually and methodologically innovative and illuminative studies are referred to in the chronological order, as they were reported in the literature, and the trends in the progress of understanding this interaction of immense therapeutic and toxicological significance are being deduced from it. The most outstanding actual trends delineated include the diminishment of toxicity via surface functionalization, cell targeting, tagging and tracking via controlled binding and uptake, hybrid INP treatments, magnetic guidance, combined drug and gene delivery, use as adjuvants in inhalable vaccines, and other. Many of the understudied research directions, which have been accomplished by the nanostructured organic polymers in the pulmonary niche, are discussed. The progress in the use of INPs as inhalable diagnostics or therapeutics has been hampered by their well-recognized inflammatory potential and toxicity in the respiratory tract. However, the annual numbers of methodologically innovative studies have been on the rise throughout the past two decades, suggesting that this is a prolific direction of research, its comparatively poor commercial takings notwithstanding. Still, the lack of consensus on the effects of many INP compositions at low but therapeutically effective doses, the plethora of contradictory reports on ostensibly identical chemical compositions and NP properties, and the many cases of antagonism in combinatorial NP treatments imply that the rational design of inhalable medical devices based on INPs must rely on qualitative principles for the most part and embrace a partially stochastic approach as well. At the same time, the fact that the most studied INPs for pulmonary applications have been those with some of the thickest records of pulmonary toxicity, e.g., carbon, silver, gold, silica and iron oxide, is a silent call for the expansion of the search for new inorganic compositions for use in inhalable therapies to new territories.

Development and Optimisation of Inhalable EGCG Nano-Liposomes as a Potential Treatment for Pulmonary Arterial Hypertension by Implementation of the Design of Experiments Approach

Epigallocatechin gallate (EGCG), the main ingredient in green tea, holds promise as a potential treatment for pulmonary arterial hypertension (PAH). However, EGCG has many drawbacks, including stability issues, low bioavailability, and a short half-life. Therefore, the purpose of this research was to develop and optimize an inhalable EGCG nano-liposome formulation aiming to overcome EGCG's drawbacks by applying a design of experiments strategy. The aerodynamic behaviour of the optimum formulation was determined using the next-generation impactor (NGI), and its effects on the TGF-β pathway were determined using a cell-based reporter assay. The newly formulated inhalable EGCG liposome had an average liposome size of 105 nm, a polydispersity index (PDI) of 0.18, a zeta potential of -25.5 mV, an encapsulation efficiency of 90.5%, and a PDI after one month of 0.19. These results are in complete agreement with the predicted values of the model. Its aerodynamic properties were as follows: the mass median aerodynamic diameter (MMAD) was 4.41 µm, the fine particle fraction (FPF) was 53.46%, and the percentage of particles equal to or less than 3 µm was 34.3%. This demonstrates that the novel EGCG liposome has all the properties required to be inhalable, and it is expected to be deposited deeply in the lung. The TGFβ pathway is activated in PAH lungs, and the optimum EGCG nano-liposome inhibits TGFβ signalling in cell-based studies and thus holds promise as a potential treatment for PAH.

Simultaneous pulmonary administration of celecoxib and naringin using a nebulization-friendly nanoemulsion: A device-targeted delivery for treatment of lung cancer

BACKGROUND

Lung cancer is a principal cause of death worldwide, and its treatment is very challenging. Nebulization offers a promising means of targeting drugs to their site of action in the lung.

RESEARCH DESIGN AND METHODS

In the present study, nebulizable oil in water nanoemulsion formulations were co-loaded with naringin/celecoxib, and tested for pulmonary administration by different nebulizer types.

RESULTS

: The translucent appearance of nanoemulsion formulations was revealed, with particle size (75-106 nm), zeta potential (-3.42 to -4.86 mV), and controlled in-vitro release profiles for both drugs. The nanoemulsions showed favourable stability profiles, and superior cytotoxicity on A549 lung cancer cells. Aerosolization studies on the selected nanoemulsion formulation revealed its high stability during nebulization, with the generation of an aerosol of small volume median diameter, and mass median aerodynamic diameter lower than 5 µm. Moreover, it demonstrated considerable safety and bioaccumulation in lung tissues, in addition to accumulation in the brain, liver and bones which are the main organs to which lung cancer metastasizes.

CONCLUSIONS

Nanoemulsion proved to be a promising nebulizable system, which paves the way for treatment of pulmonary diseases other than lung cancer.

Improvement of Pulmonary Photodynamic Therapy: Nebulisation of Curcumin-Loaded Tetraether Liposomes

Lung cancer is one of the most common causes for a high number of cancer related mortalities worldwide. Therefore, it is important to improve the therapy by finding new targets and developing convenient therapies. One of these novel non-invasive strategies is the combination of pulmonary delivered tetraether liposomes and photodynamic therapy. In this study, liposomal model formulations containing the photosensitiser curcumin were nebulised via two different technologies, vibrating-mesh nebulisation and air-jet nebulisation, and compared with each other. Particle size and ζ-potential of the liposomes were investigated using dynamic light scattering and laser Doppler anemometry, respectively. Furthermore, atomic force microscopy and transmission electron microscopy were used to determine the morphological characteristics. Using a twin glass impinger, suitable aerodynamic properties were observed, with the fine particle fraction of the aerosols being ≤62.7 ± 1.6%. In vitro irradiation experiments on lung carcinoma cells (A549) revealed an excellent cytotoxic response of the nebulised liposomes in which the stabilisation of the lipid bilayer was the determining factor. Internalisation of nebulised curcumin-loaded liposomes was visualised utilising confocal laser scanning microscopy. Based on these results, the pulmonary application of curcumin-loaded tetraether liposomes can be considered as a promising approach for the photodynamic therapy against lung cancer.

The Application of Coarse-Grained Molecular Dynamics to the Evaluation of Liposome Physical Stability

Physical stability is one of critical characteristics of liposome, especially to its clinical application. Vesicle fusion was one of the common physical stability phenomena that occurred during the long storage period. Because vesicle fusion could be easily checked by the change of vesicle size, it was widely applied in the evaluation of liposome physical stability. However, since the method requires the liposome to be placed under certain conditions for long-term observation, a liposome physical stability test usually takes several weeks, which greatly hinders the research efficiency. In this study, to speed up the research efficiency, coarse-grained molecular dynamics was first applied in the study of liposome physical stability. By analyzing the microprocess of vesicle fusion, two parameters including diffusion constant and the total time of the vesicle morphology transition process were employed to study the liposome physical stability. Then, in order to verify the applicability of two parameters, the physical stability of elastic liposomes and conventional liposomes was compared at 3 different temperatures. It was found that the fusion probability and speed of elastic liposomes were higher than those of conventional liposomes. Thus, elastic liposomes showed a worse physical stability compared with that of conventional liposomes, which was consistent with former research. Through this research, a new efficient method based on coarse-grained molecular dynamics was proposed for the study of liposome physical stability.

Thermosensitive in situ liposomal gels loaded with antimicrobial agent for oral care in critically ill patients

Aim: A novel thermosensitive in situ gel loaded with meropenem (MP) liposomes was designed to improve retention in the oral cavity as a prophylactic measure to prevent ventilator-acquired pneumonia in critically ill patients. Methodology & results: Meropenem liposomes were incorporated into poloxamer 407 gels and gamma irradiated. Mean size of liposome was 247 nm, polydispersity index < 0.3 and zeta potential >-25 mV; properties remained unaltered even post sterilization. Permeation study revealed that 75.26% and 34% of MPs were released from MP in situ gel and MP in situ liposomal gel, respectively. The relation between viscosity (cp) and shear rate (1/s) indicate that in situ gels exhibited non-Newtonian behavior at 37°C. The study using Pseudomonas aeruginosa confirmed the antimicrobial activity of meropenem. Conclusion: Prolonged in situ residence, because of rapid gelation process enables an easy administration of meropenem as liposomal suspension in critically ill patients.

Nebulization as a tool for photosensitizer delivery to the respiratory tract

To this day, any photosensitizers for the photodynamic treatment of pulmonary illnesses have been administered intravenously. There is, however, an intrinsic difficulty in reaching the target cells or bacteria in the respiratory system. Nebulization could overcome distribution problems and alleviate side effects by delivering the photosensitizers directly to the lungs. In this study, we evaluated the viability of three photosensitizers (indocyanine green, the chlorine Photodithazine, and the porphyrin Photogem) was evaluated comparatively in a jet nebulizer. Quantitative analysis was performed by looking at the droplet size, extent of nebulization, output over time and stability of the solutions. All of the tested photosensitizers were found to be adequately nebulized. We also demonstrated the delivery of indocyanine green to the pulmonary tract and its activation with infrared light in a murine model using extracorporeal detection of fluorescence. This was an important step toward clinical implementation of the extracorporeally illuminated photodynamic inactivation of pneumonia, recently demonstrated in vivo by this research group.

Proliposome Powders for the Generation of Liposomes: the Influence of Carbohydrate Carrier and Separation Conditions on Crystallinity and Entrapment of a Model Antiasthma Steroid

Formulation effects on the entrapment of beclometasone dipropionate (BDP) in liposomes generated by hydration of proliposomes were studied, using the high-density dispersion medium deuterium oxide in comparison to deionized water (DW). Proliposomes incorporating BDP (2 mol% of the lipid phase consisting of soya phosphatidylcholine (SPC) and cholesterol; 1:1) were manufactured, using lactose monohydrate (LMH), sorbitol or D-mannitol as carbohydrate carriers (1:5 w/w lipid to carrier). Following hydration of proliposomes, separation of BDP-entrapped liposomes from the unentrapped (free) BDP at an optimized centrifugation duration of 90 min and a centrifugation force of 15,500g were identified. The dispersion medium was found to have a major influence on separation of BDP-entrapped liposomes from the unentrapped drug. Entrapment efficiency values were higher than 95% as estimated when DW was used. By contrast, the entrapment efficiency was 19.69 ± 5.88, 28.78 ± 4.69 and 34.84 ± 3.62% upon using D₂O as a dispersion medium (for LMH-, sorbitol- and D-mannitol-based proliposomes, respectively). The similarity in size of liposomes and BDP crystals was found to be responsible for co-sedimentation of liposomes and free BDP crystals upon centrifugation in DW, giving rise to the falsely high entrapment values estimated. This was remedied by the use of D₂O as confirmed by light microscopy, nuclear magnetic resonance (¹HNMR), X-ray diffraction (XRD) and entrapment studies. This study showed that carrier type has a significant influence on the entrapment of BDP in liposomes generated from proliposomes, and using D₂O is essential for accurate determination of steroid entrapment in the vesicles.

Elastic liposomes as novel carriers: recent advances in drug delivery

Elastic liposomes (EL) are some of the most versatile deformable vesicular carriers that comprise physiologically biocompatible lipids and surfactants for the delivery of numerous challenging molecules and have marked advantages over other colloidal systems. They have been investigated for a wide range of applications in pharmaceutical technology through topical, transdermal, nasal, and oral routes for efficient and effective drug delivery. Increased drug encapsulation efficiency, enhanced drug permeation and penetration into or across the skin, and ultradeformability have led to widespread interest in ELs to modulate drug release, permeation, and drug action more efficiently than conventional drug-release vehicles. This review provides insights into the versatile role that ELs play in the delivery of numerous drugs and biomolecules by improving drug release, permeation, and penetration across the skin as well as stability. Furthermore, it provides future directions that should ensure the widespread use of ELs across all medical fields.

Ultradeformable Liposomes: a Novel Vesicular Carrier For Enhanced Transdermal Delivery of Procyanidins: Effect of Surfactants on the Formation, Stability, and Transdermal Delivery

The aims of this work were to develop a novel vesicular carrier, procyanidins, ultradeformable liposomes (PUDLs), to expand the applications for procyanidins, and increase their stability and transdermal delivery. In this study, we prepared procyanidins ultradeformable liposomes using thin film hydration method and evaluated their encapsulation efficiency, vesicle deformability, storage stability, and skin permeation in vitro. The influence of different surfactants on the properties of PUDLs was also investigated. The results obtained showed that the PUDLs containing Tween 80 had a high entrapment efficiency (80.27 ± 0.99%), a small particle size (140.6 ± 19 nm), high elasticity, and prolonged drug release. Compared with procyanidins solution, the stability of procyanidins in PUDLs improved significantly when stored at 4, 25, and 30°C. The penetration rate of PUDLs was 6.25-fold greater than that of procyanidins solution. Finally, the results of our study suggested that PUDLs could increase the transdermal flux, prolong the release and improve the stability of procyanidins, and could serve as an effective dermal delivery system for procyanidins.

Nanotransfersomes-loaded thermosensitive in situ gel as a rectal delivery system of tizanidine HCl: preparation, in vitro and in vivo performance

The purpose of the current study was to develop tizanidine HCl (TIZ; a myotonolytic agent used for treatment of spasticity) loaded nanotransfersomes intended for rectal administration, aiming to bypass the hepatic first-pass metabolism. TIZ-loaded nanotransfersomes were prepared by thin-film hydration method followed by characterization for various parameters including entrapment efficiency, vesicle diameter, in vitro release and ex vivo permeation studies. Transfersomal formulation composed of phosphatidylcholine and Tween 80 at a weight ratio of (85:15) gave a satisfactory results. It exhibited encapsulation efficiency of 52.39%, mean diameter of 150.33 nm, controlled drug release over 8 h and good permeation characteristics. Optimum formula was then incorporated into Pluronic-based thermoreversible gel using hydroxypropyl methylcellulose (HPMC) as a mucoadhesive polymer. Pharmacokinetic study was performed by rectal administration of transfersomes-loaded in situ gel to rabbits and compared with oral drug solution and rectal TIZ in situ gel. The pharmacokinetic study revealed that the transfersomal formulation successively enhanced the bioavailability of TIZ by about 2.18-fold and increased t_1/2 to about 10 h as compared to oral solution. It can be concluded that encapsulation of TIZ into nanotransfersomes can achieve a dual purpose of prolonged TIZ release and enhanced bioavailability and so may be considered as a promising drug delivery system for the treatment of spasticity.

Nebulized solid lipid nanoparticles for the potential treatment of pulmonary hypertension via targeted delivery of phosphodiesterase-5-inhibitor

Phosphodiesterase type 5 (PDE-5) inhibitors - among which sildenafil citrate (SC) - play a primary role in the treatment of pulmonary hypertension (PH). Yet, SC can be only administered orally or parenterally with lot of risks. Targeted delivery of SC to the lungs via inhalation/nebulization is mandatory. In this study, solid lipid nanoparticles (SLNs) loaded with SC were prepared and characterized in terms of colloidal, morphological and thermal properties. The amount of drug loaded and its release behavior were estimated as a function of formulation variables. The potential of lipid nanocarriers to retain their properties following nebulization and autoclaving was investigated. In addition, toxicity aspects of plain and loaded SLNs on A549 cells were studied with respect to concentration. Spherical SLNs in the size range (100-250nm) were obtained. Particles ensured high encapsulation efficiency (88-100%) and sustained release of the payload over 24h. Cell-based viability experiments revealed a concentration-dependant toxicity for both plain and loaded SLNs recording an IC₅₀ of 516 and 384μg/mL, respectively. Nebulization with jet nebulizer and sterilization via autoclaving affected neither the colloidal stability of SLNs nor the drug entrapment, proving their potential as pulmonary delivery system. Interaction of SLNs with mucin was a function of the emulsifier coating layer. Results yet seeking clinical evidence - might give promises of new therapy for PH of higher safety, better performance and higher patient compliance.

Surviving nebulization-induced stress: dexamethasone in pH-sensitive archaeosomes

Aim: To increase the subcellular delivery of dexamethasone phosphate (DP) and stability to nebulization stress, pH-sensitive nanoliposomes (LpH) exhibiting archaeolipids, acting as ligands for scavenger receptors (pH-sensitive archaeosomes [ApH]), were prepared. Materials & methods: The anti-inflammatory effect of 0.18 mg DP/mg total lipid, 100–150 nm DP-containing ApH (dioleylphosphatidylethanolamine: Halorubrum tebenquichense total polar archaeolipids:cholesteryl hemisuccinate 4.2:2.8:3 w:w) was tested on different cell lines. Size and HPTS retention of ApH and conventional LpH (dioleylphosphatidylethanolamine:cholesteryl hemisuccinate 7:3 w:w) before and after nebulization were determined. Results & conclusion: DP-ApH suppressed IL-6 and TNF-α on phagocytic cells. Nebulized after 6-month storage, LpH increased size and completely lost its HPTS while ApH3 conserved size and polydispersity, fully retaining its original HPTS content.

The function and performance of aqueous aerosol devices for inhalation therapy

OBJECTIVES

In this review paper, we explore the interaction between the functioning mechanism of different nebulizers and the physicochemical properties of the formulations for several types of devices, namely jet, ultrasonic and vibrating-mesh nebulizers; colliding and extruded jets; electrohydrodynamic mechanism; surface acoustic wave microfluidic atomization; and capillary aerosol generation.

KEY FINDINGS

Nebulization is the transformation of bulk liquids into droplets. For inhalation therapy, nebulizers are widely used to aerosolize aqueous systems, such as solutions and suspensions. The interaction between the functioning mechanism of different nebulizers and the physicochemical properties of the formulations plays a significant role in the performance of aerosol generation appropriate for pulmonary delivery. Certain types of nebulizers have consistently presented temperature increase during the nebulization event. Therefore, careful consideration should be given when evaluating thermo-labile drugs, such as protein therapeutics. We also present the general approaches for characterization of nebulizer formulations.

SUMMARY

In conclusion, the interplay between the dosage form (i.e. aqueous systems) and the specific type of device for aerosol generation determines the effectiveness of drug delivery in nebulization therapies, thus requiring extensive understanding and characterization.

Aerosol Performance and Stability of Liposomes Containing Ciprofloxacin Nanocrystals

Background: Previously we showed that the release properties of a liposomal ciprofloxacin (CFI) formulation could be attenuated by incorporation of drug nanocrystals within the vesicles. Rather than forming these drug nanocrystals during drug loading, they were created post manufacture simply by freezing and thawing the formulation. The addition of surfactant to CFI, either polysorbate 20 or Brij 30, provided an additional means to modify the release profile or incorporate an immediate-release or ‘burst’ component as well. The goal of this study was to develop a CFI formulation that retained its nanocrystalline morphology and attenuated release profile after delivery as an inhaled aerosol.

Methods: Preparations of 12.5 mg/mL CFI containing 90 mg/mL sucrose and 0.1% polysorbate 20 were formulated between pH 4.6 to 5.9, stored frozen, and thawed prior to use. These thawed formulations, before and after mesh nebulization, and after subsequent refrigerated storage for up to 6 weeks, were characterized in terms of liposome structure by cryogenic transmission electron microscopy (cryo-TEM) imaging, vesicle size by dynamic light scattering, pH, drug encapsulation by centrifugation-filtration, and in vitro release (IVR) performance.

Results: Within the narrower pH range of 4.9 to 5.3, these 12.5 mg/mL liposomal ciprofloxacin formulations containing 90 mg/mL sucrose and 0.1% polysorbate 20 retained their physicochemical stability for an additional 3 months refrigerated storage post freeze-thaw, were robust to mesh nebulization maintaining their vesicular form containing nanocrystalline drug and an associated slower release profile, and formed respirable aerosols with a mass median aerodynamic diameter (MMAD) of ∼3.9 μm and a geometric standard deviation (GSD) of ∼1.5.

Conclusions: This study demonstrates that an attenuated release liposomal ciprofloxacin formulation can be created through incorporation of drug nanocrystals in response to freeze-thaw, and the formulation retains its physicochemical properties after aerosolization by mesh nebulizer.

Generation of tailored aerosols for inhalative drug delivery employing recent vibrating-mesh nebulizer systems

Direct drug delivery to the lungs is considered the gold standard for the treatment of a variety of respiratory diseases, owing to the increased therapeutic selectivity of the inhalative approach. Airborne formulations with defined size characteristics are required to improve the deposition pattern within the airways. In this respect, different nebulizer systems have been conceived, which has enabled the generation of respirable medicament mists. Here, vibrating-mesh technology revealed significant potential to overcome the main shortcomings associated with ‘traditional’ devices. Tailored orifice dimensions and defined formulation characteristics are of special interest for the generation of suitable aerosol droplets for inhalative purposes. Ongoing developments in device and formulation design will optimize the clinical outcome of inhalative drug delivery under application of vibrating-mesh technology.

Inhaled formulations and pulmonary drug delivery systems for respiratory infections

Respiratory infections represent a major global health problem. They are often treated by parenteral administrations of antimicrobials. Unfortunately, systemic therapies of high-dose antimicrobials can lead to severe adverse effects and this calls for a need to develop inhaled formulations that enable targeted drug delivery to the airways with minimal systemic drug exposure. Recent technological advances facilitate the development of inhaled anti-microbial therapies. The newer mesh nebulisers have achieved minimal drug residue, higher aerosolisation efficiencies and rapid administration compared to traditional jet nebulisers. Novel particle engineering and intelligent device design also make dry powder inhalers appealing for the delivery of high-dose antibiotics. In view of the fact that no new antibiotic entities against multi-drug resistant bacteria have come close to commercialisation, advanced formulation strategies are in high demand for combating respiratory 'super bugs'.

Aerosol performance and long-term stability of surfactant-associated liposomal ciprofloxacin formulations with modified encapsulation and release properties

Previously, we showed that the encapsulation and release properties of a liposomal ciprofloxacin formulation could be modified post manufacture, by addition of surfactant in concert with osmotic swelling of the liposomes. This strategy may provide more flexibility and convenience than the alternative of manufacturing multiple batches of liposomes differing in composition to cover a wide range of release profiles. The goal of this study was to develop a surfactant-associated liposomal ciprofloxacin (CFI) formulation possessing good long-term stability which could be delivered as an inhaled aerosol. Preparations of 12.5 mg/ml CFI containing 0.4% polysorbate 20 were formulated between pH 4.7 and 5.5. These formulations, before and after mesh nebulization, and after refrigerated storage for up to 2 years, were characterized in terms of liposome structure by cryogenic transmission electron microscopy (cryo-TEM) imaging, vesicle size by dynamic light scattering, pH, drug encapsulation by centrifugation-filtration, and in vitro release (IVR) performance. Within the narrower pH range of 4.9 to 5.2, these formulations retained their physicochemical stability after 2-year refrigerated storage, were robust to mesh nebulization, and formed respirable aerosols with a volume mean diameter (VMD) of 3.7 μm and a geometric standard deviation (GSD) of 1.7. This study demonstrates that it may be possible to provide a range of release profiles by simple addition of surfactant to a liposomal formulation post manufacture, and that these formulations may retain their physicochemical properties after long-term refrigerated storage and following aerosolization by mesh nebulizer.

Nano-antibiotics in chronic lung infection therapy against Pseudomonas aeruginosa

Antibiotic encapsulation into nanoparticle carriers has emerged as a promising inhaled antibiotic formulation for treatment of chronic Pseudomonas aeruginosa lung infection prevalent in chronic obstructive pulmonary diseases. Attributed to their prolonged lung retention, sustained antibiotic release, and mucus penetrating ability, antibiotic nanoparticles, or nano-antibiotics in short, can address the principal weakness of inhaled antibiotic solution, i.e. low antibiotic exposure in the vicinity of P. aeruginosa biofilm colonies resulting in diminished anti-pseudomonal efficacy after repeated uses. This review details the current state of development and limitations of the two most widely studied forms of nano-antibiotics, i.e. liposomes and polymer nanoparticles. Factors in their formulation that influence the anti-pseudomonal efficacy in vitro and in vivo, such as liposome's membrane rigidity, surface charge, size, and polymer hydrophobicity, are discussed. This review reveals that the superior anti-pseudomonal efficacy of liposomal antibiotics to free antibiotics has been clearly established when they are correctly formulated, with several liposomal antibiotic formulations are currently undergoing clinical trials. Liposomal antibiotics, nevertheless, are not without limitation due to their weak physicochemical stability. In contrast, only mucus penetrating ability of the more stable polymeric nano-antibiotics has been established, while their anti-pseudomonal efficacy has only been examined in vitro from which their superiority to free antibiotics has not been ascertained. Lastly, future research needs to bring liposome and polymer-based nano-antibiotics closer to their clinical realization are identified.

PAMAM dendrimers as aerosol drug nanocarriers for pulmonary delivery via nebulization

Polyamidoamine (PAMAM) dendrimers were evaluated as nanocarriers for pulmonary delivery of the model poorly soluble anti-asthma drug beclometasone dipropionate (BDP) using G3, G4 and G4(12) dendrimers. BDP-loaded dendrimers were characterized for drug solubility, in vitro drug release and aerosolization properties using three nebulizers: Pari LC Sprint (air-jet), Aeroneb Pro (actively vibrating-mesh) and Omron MicroAir (passively vibrating-mesh) nebulizers. Solubilization of BDP using dendrimers was increased by increasing the dendrimer generation and by using higher pH media. In vitro release studies showed that BDP when complexed with dendrimers exhibited a sustained release, and for all dendrimer formulations less than 35% of the drug was released after 8h. Nebulization studies revealed that aerosol performance was dependent on nebulizer rather than dendrimer generation. Nebulization output values for the Pari (air-jet) and Aeroneb Pro (active mesh) nebulizers were in the range of 90-92% and 85-89% respectively compared to 57-63% for the Omron (passive mesh) nebulizer. The size of the droplets generated from the jet nebulizer was slightly smaller and aerosol polydispersity was lower compared to both mesh devices. The "fine particle fraction (FPF)" of the aerosols was in the following order: Pari (air-jet)>Aeroneb Pro (active mesh)>Omron (passive mesh). This study demonstrates that BDP-dendrimers have potential for pulmonary inhalation using air-jet and vibrating-mesh nebulizers. Moreover, the aerosol characteristics are influenced by nebulizer design rather than dendrimer generation.

Liposomal formulations for inhalation

No marketed inhaled products currently use sustained release formulations such as liposomes to enhance drug disposition in the lung, but that may soon change. This review focuses on the interaction between liposomal formulations and the inhalation technology used to deliver them as aerosols. There have been a number of dated reviews evaluating nebulization of liposomes. While the information they shared is still accurate, this paper incorporates data from more recent publications to review the factors that affect aerosol performance. Recent reviews have comprehensively covered the development of dry powder liposomes for aerosolization and only the key aspects of those technologies will be summarized. There are now at least two inhaled liposomal products in late-stage clinical development: ARIKACE® (Insmed, NJ, USA), a liposomal amikacin, and Pulmaquin™ (Aradigm Corp., CA, USA), a liposomal ciprofloxacin, both of which treat a variety of patient populations with lung infections. This review also highlights the safety of inhaled liposomes and summarizes the clinical experience with liposomal formulations for pulmonary application.

Enhanced transdermal delivery of diclofenac sodium via conventional liposomes, ethosomes, and transfersomes

The aim of this study was to improve the transdermal permeation of Diclofenac sodium, a poorly water-soluble drug, employing conventional liposomes, ethosomes, and transfersomes. The prepared formulations had been characterized for the loaded drug amount and vesicle size. The prepared vesicular systems were incorporated into 1% Carbopol 914 gel, and a survey of in vitro drug release and drug retention into rat skin has been done on them using a modified Franz diffusion cell. The cumulative amount of drug permeated after 24 h, flux, and permeability coefficient were assessed. Stability studies were performed for three months. The size of vesicles ranged from 145 to 202 nm, and the encapsulation efficiency of the Diclofenac sodium was obtained between 42.61% and 51.72%. The transfersomes and ethosomes provided a significantly higher amount of cumulative permeation, steady state flux, permeability coefficient, and residual drug into skin compared to the conventional liposomes, conventional gel, or hydroethanolic solution. The in vitro release data of all vesicular systems were well fit into Higuchi model (RSD > 0.99). Stability tests indicated that the vesicular formulations were stable over three months. Results revealed that both ethosome and transfersome formulations can act as drug reservoir in skin and extend the pharmacologic effects of Diclofenac sodium.