Novel in situ gelling ocular films for the opioid growth factor-receptor antagonist-naltrexone hydrochloride: fabrication, mechanical properties, mucoadhesion, tolerability and stability studies

Formulation of hesperidin-loaded in situ gel for ocular drug delivery: a comprehensive study

BACKGROUND

Allergic conjunctivitis is one of the most common eye disorders. Different drugs are used for its treatment. Hesperidin is an active substance isolated from Citrus sinensis L. (Rutaceae) fruit peels, with known anti-inflammatory activity but low solubility. It was complexed with cyclodextrin and encapsulated in situ gel to extend its duration in the eye.

RESULTS

The optimized formulation comprised 1% hesperidin, 1.5% hydroxyethyl cellulose, and 16% poloxamer 407. The viscosity at 25 °C was 492 ± 82 cP, and at 35 °C it was 8875 ± 248 cP, the pH was 7.01 ± 0.03, gelation temperature was 34 ± 1.3 °C, and gelation time was 33 ± 1.2 s. There was a 66% in vitro release in the initial 2 h, with a burst effect. A lipoxygenase (LOX) inhibition test determined that hesperidin was active at high doses on leukotyrens seen in the body in allergic diseases. In cell-culture studies, the hesperidin cyclodextrin complex loaded in situ gel, BRN9-CD (poloxamer 16%, hydroxy ethyl cellulose (HEC) 1.5%), enhanced cell viability in comparison with the hesperidin solution. It was determined that BRN9-CD did not cause any irritation in the ocular tissues in the Draize test.

CONCLUSION

The findings of this study demonstrate the potential of the in situ gel formulation of hesperidin in terms of ease of application and residence time on the ocular surface. Due to its notable LOX inhibition activity and positive outcomes in the in vivo Draize test, it appears promising for incorporation into pharmaceutical formulations. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Tamarind seed polysaccharide-metformin insert: Higher ocular retention, slow-release, and efficacy against corneal burn

Metformin (MET) can be an alternative therapeutic strategy for managing ocular burn primarily because of its pleiotropic mechanism. Longer retention on the ocular surface and sustained release are necessary to ensure the efficacy of MET for ocular application. Although the high aqueous solubility of MET is good for formulation and biocompatibility, it makes MET prone to high nasolacrimal drainage. This limits ocular residence and may be a challenge in its application. To address this, polymers approved for ophthalmic application with natural origin were analyzed through in silico methods to determine their ability to bind to mucin and interact with MET. An ocular insert of MET (3 mg/6 mm) was developed using a scalable solvent casting method without using preservatives. The relative composition of the insert was 58 ± 2.06 %w/w MET with approximately 14 %w/w tamarind seed polysaccharide (TSP), and 28 %w/w propylene glycol (PG). Its stability was demonstrated as per the ICH Q1A (R2) guidelines. Compatibility, ocular retention, drug release, and other functional parameters were evaluated. In rabbits, efficacy was demonstrated in the 'corneal alkali burn preclinical model'. TSP showed potential for mucoadhesion and interaction with MET. With adequate stability and sterility, the insert contributed to adequate retention of MET (10-12 h) in vivo and slow release (30 h) in vitro. This resulted in significant efficacy in vivo.

Physical and mechanical properties of ocular thin films: a systematic review and meta-analysis

The ocular thin film presents a potential solution for addressing challenges to ocular drug delivery. In this review, we summarise the findings of a comprehensive review analysing 336 formulations from 68 studies. We investigated the physical and mechanical properties of ocular thin films, categorised into natural polymer-based, synthetic polymer-based, and combined polymer films. The results showed that the type of polymers used impacted mucoadhesion force, moisture absorption:moisture loss ratio, pH, swelling index, and elongation percentage. Significant relationships were found between these properties within each subgroup. The results also highlighted the influence of plasticisers on elongation percentage, mucoadhesion force, swelling index, and moisture absorption:moisture loss ratio. These findings have implications for designing and optimising ocular drug formulations and selecting appropriate plasticisers to achieve formulations with the desired properties.

Matrix hyaluronic acid and bilayer poly-hydroxyethyl methacrylate-hyaluronic acid films as potential ocular drug delivery platforms

This study aimed to design hydrogel based films comprising hyaluronic acid (HA) to overcome limitations of currently used eye drops. Timolol-loaded crosslinked (X2) HA-based and bilayer (B2) (pHEMA/PVP-HA-based layers) films were designed and characterized. The films were transparent (UV, visual observation) with crosslinked (<80 %) films showing lower light transmittance than bilayer (>80 %) films. X2 showed significantly higher swelling capacity, tensile strength and elastic modulus (5491.6 %, 1539.8 Nmm-2, 1777.2 mPa) than B2 (1905.0 %, 170.0N mm-2, 67.3 mPa) respectively. However, X2 showed lower cumulative drug released and adhesive force (27.3 %, 6.2 N) than B2 (57.5 %, 8.6 N). UV sterilization did not significantly alter physical properties, while SEM and IR microscopy showed smooth surface morphology and homogeneous drug distribution. Timolol permeation (EpiCorneal™/porcine cornea) depended on the film matrix with erodible films showing similar permeation to commercial eyedrops. Drug permeation for porcine cornea (X2 = 549.0.2, B2 = 312.1 μgcm-2 h-1) was significantly faster than EpiCorneal™ (X2 = 55.2, B2 = 37.6 μgcm-2 h-1), but with a linear correlation between them. All the selected optimized films showed acceptable compatibility (MTT assay) with both HeLa cells and EpiCorneal™. In conclusion, crosslinked and bilayer HA based films showed ideal characteristics suitable for potential ocular drug delivery, though further work is required to further optimize these properties and confirm their efficacy including in vivo tests.

Characterization and Bio-Evaluation of the Synergistic Effect of Simvastatin and Folic Acid as Wound Dressings on the Healing Process

Wound healing is a significant healthcare problem that decreases the patient's quality of life. Hence, several agents and approaches have been widely used to help accelerate wound healing. The challenge is to search for a topical delivery system that could supply long-acting effects, accurate doses, and rapid healing activity. Topical forms of simvastatin (SMV) are beneficial in wound care. This study aimed to develop a novel topical chitosan-based platform of SMV with folic acid (FA) for wound healing. Moreover, the synergistic effect of combinations was determined in an excisional wound model in rats. The prepared SMV-FA-loaded films (SMV-FAPFs) were examined for their physicochemical characterizations and morphology. Box-Behnken Design and response surface methodology were used to evaluate the tensile strength and release characteristics of the prepared SMV-FAPFs. Additionally, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction pattern (XRD), and animal studies were also investigated. The developed SMV-FAPFs showed a contraction of up to 80% decrease in the wound size after ten days. The results of the quantitative real-time polymerase chain reaction (RT-PCR) analysis demonstrated a significant upregulation of dermal collagen type I (CoTI) expression and downregulation of the inflammatory JAK3 expression in wounds treated with SMV-FAPFs when compared to control samples and individual drug treatments. In summary, it can be concluded that the utilization of SMV-FAPFs holds great potential for facilitating efficient and expeditious wound healing, hence presenting a feasible substitute for conventional topical administration methods.

Captopril Polyvinyl Alcohol/Sodium Alginate/Gelatin-Based Oral Dispersible Films (ODFs) with Modified Release and Advanced Oral Bioavailability for the Treatment of Pediatric Hypertension

Hypertension can begin in childhood; elevated blood pressure in children is known as pediatric hypertension. Contrary to adult hypertension, there is a scarcity of commercial medications suitable for the treatment of pediatric hypertension. The aim of this study was to develop orally dispersible films (ODFs) loaded with captopril for the treatment of hypertension in children. Captopril-loaded ODFs were composed of different blends of synthetic polymers, such as polyvinyl alcohol (PVA) and polyvinyl pyrrolidone, and natural polymers, such as sodium alginate (SA) and gelatin. The ODFs were characterized based on their mechanical and thermal properties, drug content, surface morphology, in vitro disintegration, in vitro release, and bioavailability. A novel HPLC method with precolumn derivatization was developed to precisely and selectively determine captopril levels in plasma. A low concentration of PVA and a high concentration of SA generated ODFs with faster hydration and disintegration rates. SA-based films exhibited fast disintegration properties (1-2 min). The optimized modified-release film (F2) showed significant (p < 0.05) enhancement in bioavailability (AUC = 1000 ng min/mL), with a value 1.43 times that of Capoten® tablets (701 ng min/mL). While the plasma concentration peaking was in favor of the immediate-release tablet, Tmax was significantly prolonged by 5.4 times for the optimized ODF (3.59 h) compared with that of the tablets (0.66 h). These findings indicate uniform and sustained plasma concentrations, as opposed to the pulsatile and rapid plasma peaking of captopril from the immediate-release tablets. These findings suggest that the modified release of oral films could offer more favorable plasma profiles and better control of hypertension than the conventional release tablets.

Sustained release ocular drug delivery systems for glaucoma therapy

INTRODUCTION

Glaucoma is a group of progressive optic neuropathies resulting in irreversible blindness. It is associated with an elevation of intraocular pressure (>21 mm Hg) and optic nerve damage. Reduction of the intraocular pressure (IOP) through the administration of ocular hypotensive eye drops is one of the most common therapeutic strategies. Patient adherence to conventional eye drops remains a major obstacle in preventing glaucoma progression. Additional problems emerge from inadequate patient education as well as local and systemic side effects associated with adminstering ocular hypotensive drugs.

AREAS COVERED

Sustained-release drug delivery systems for glaucoma treatment are classified into extraocular systems including wearable ocular surface devices or multi-use (immediate-release) eye formulations (such as aqueous solutions, gels; ocular inserts, contact lenses, periocular rings, or punctual plugs) and intraocular drug delivery systems (such as intraocular implants, and microspheres for supraciliary drug delivery).

EXPERT OPINION

Sustained release platforms for the delivery of ocular hypotensive drugs (small molecules and biologics) may improve patient adherence and prevent vision loss. Such innovations will only be widely adopted when efficacy and safety has been established through large-scale trials. Sustained release drug delivery can improve glaucoma treatment adherence and reverse/prevent vision deterioration. It is expected that these approaches will improve clinical management and prognosis of glaucoma.

Pharmacological treatment strategies of pterygium: Drugs, biologics, and novel natural products

Pterygium is a fibrovascular tissue growth invading the cornea. Adjunctive treatment post-surgery includes conventional immunosuppressants as well as antiviral drugs. The use of large- and small-molecule antivascular endothelial growth factor (VEGF) agents remains an integral part of pterygium treatment as well as other neovascular conditions of the eye. Naturally occurring polyphenolic compounds have favorable characteristics for treating neovascular and inflammatory eye conditions, including good efficacy, stability, cost-effectiveness, and the versatility of their chemical synthesis. In this review, we discuss pharmacological treatments of pterygium. Natural products, such curcumin, ellagic acid, and chalcones, are reviewed, with emphasis on their potential as future pterygium treatments.

Polymeric/Dextran Wafer Dressings as Promising Long-Acting Delivery Systems for Curcumin Topical Delivery and Enhancing Wound Healing in Male Wistar Albino Rats

Curcumin is the main active constituent in turmeric, and it is one of the biopolyphenolic compounds. A cumulative body of research supports the use of curcumin in the treatment of wounds, yet poor water solubility and lack of therapeutic dose determination hamper its use for this therapeutic purpose. This work aimed at preparing novel curcumin wafer dressings to provide a favorable environment for wound healing. Hybrid synthetic (PVA, PVP, HPMC, and CMC) and biodegradable (sodium alginate and dextran) polymers were employed to prepare wafer dressings loaded with incremental three doses (2, 10, and 20 mg) of curcumin per a wafer dressing. The solvent casting method was used to prepare the dressings. Dimension, surface pH, mechanical properties, DSC, FTIR, XRD, erosion time, and in vitro release were studied. Skin wound healing assay was studied in Wistar albino rats. Six curcumin-loaded wafers were successfully prepared with good mechanical properties. Curcumin was dispersed in an amorphous/molecular form, as evidenced by thermal (DSC) and spectral (FTIR and XRD) analyses. Prolonged curcumin release (>24 h) was recorded for F6 (10 mg curcumin) and F7 (20 mg curcumin). Wound healing rate constants and time for 50% wound closure (T1/2) were estimated from a semi-log wound diameter versus time curve. A superior healing rate (up to 3-fold faster) was recorded for curcumin-loaded wafer dressings containing 10 mg (F6) with T1/2 of 7 days compared to 20 days for the placebo-treated group. These results warrant using the selected curcumin-loaded wafer dressing for safer and faster wound closure.

Opioids and Ocular Surface Pathology; A Literature Review of New Treatments Horizons

This review discusses the role of opioids in the corneal surface and the different pathways and therapeutic methods of management. A literature review was performed using PubMed database. For the database search, the main searching words “opioid” and “topical opioid treatment” were used with the descriptors “cornea”, “ocular surface”, “neuropathic corneal pain”, “corneal sensitivity” and “naltrexone”; original scientific articles and reviews were included to achieve the purpose of the review. The endogenous opioid system has relevant functions in the organism, and in daily use, opioids are used as painkillers. However, these drugs may be employed for other indications as opioid pathways have a wide spectrum. The corneal surface for topical treatment is easily accessible, hence sparing the side effects of systemic opioids. Instillation of opioid antagonist substances, such as naltrexone, increases corneal healing rates and stimulates the division of corneal epithelium cells without deleterious effects. The natural modulation of endogenous opioids controls different forms of pain, including inflammatory and neuropathic pain, both in the ocular surface and in the central nervous system. There are diverse methods in controlling pain using opioids, especially in refractory forms. This review attempts to collect the literature about corneal surface and opioid pathways to provide an overview image and a possible direction of the news treatments.

A supramolecular thermosensitive gel of ketoconazole for ocular applications: In silico, in vitro, and ex vivo studies

The incidence of corneal fungal infections continues to be a growing concern worldwide. Ocular delivery of anti-fungal drugs is challenging due to the anatomical and physiological barriers of the eye. The ocular bioavailability of ketoconazole (KTZ), a widely prescribed antifungal agent, is hampered by its limited aqueous solubility and permeation. In the study, the physicochemical properties of KTZ were improved by complexation with sulfobutylether-β-cyclodextrin (SBE-β-CD).KTZ-SBE-β-CD complex was studied in silico with docking and dynamics simulations, followed by wet-lab experiments.The optimized KTZ-SBE-β-CD complex was loaded into a thermosensitivein situ gel to increase corneal bioavailability. The supramolecular complex increased the solubility of KTZ by 5-folds and exhibited a 10-fold increment in drug release compared to the pure KTZ. Owing to the diffusion, thein situ gel exhibited a more sustained drug release profile. Theex vivocorneal permeation studies showed higher permeation from KTZ-SBE-β-CD in situ gel (flux of ∼19.11 µg/cm²/h) than KTZin situ gel (flux of ∼1.17 µg/cm²/h). The cytotoxicity assays and the hen's egg chorioallantoic membrane assay (HET-CAM) confirmed the formulations' safety and non-irritancy. In silico guided design of KTZ-SBE-β-CD inclusion complexes successfully modified the physicochemical properties of KTZ. In addition, the loading of the KTZ-SBE-β-CD complex into an in situ gel significantly increased the precorneal retention and permeation of KTZ, indicating that the developed formulation is a viable modality to treat fungal keratitis.

A hybrid ocular delivery system of cyclosporine-A comprising nanomicelle-laden polymeric inserts with improved efficacy and tolerability

We report on hybrid nanomicelle-polymer inserts for improved delivery of cyclosporine A (CyA) to the surface of the eye. Hybrid inserts containing a nanomicellar formulation were prepared by the solvent casting method; their characteristics, in vitro release of CyA, eye irritation potential, nanomicelle distribution inside the insert, and in vivo pharmacokinetics of the most promising solid formulation (F3) were investigated. Nanomicelles capable of accommodating a therapeutically relevant amount of CyA (57.22 ± 5.90-68.52 ± 1.4 μg) were incorporated into five different polymeric formulations (F1-F5). The developed inserts displayed promising characteristics (size, weight, surface pH, and contact angle) that fulfill ocular tolerability requirements. Considering the technological properties and CyA in vitro release, F3 and F5 were the most promising formulations. SEM analysis suggested the F3 formulation as the potential prototype for CyA ocular delivery. The F3 formulation (CyA: 60.08 ± 2.85 μg) did not induce conjunctival irritation when HET-CAM assay was performed and was hence considered suitable for further study in a rabbit eye. The AUC value for CyA loaded in the F3 insert was about 2-fold greater than that obtained with the Ikervis® used as a control formulation. F3 produced a significant reduction (of about 7-folds) in the rate of CyA elimination from the tear fluid relative to Ikervis® and about 4-fold greater reduction than Nano-CyA (p = 0.0187). The ability of F3 to delay the elimination of the drug from the precorneal area is particularly desirable when treating dry eye syndrome. Furthermore, F3 did not induce ocular discomfort, a typical characteristic of solid ocular inserts, including commercially available ones.

Polymeric long-acting drug delivery systems (LADDS) for treatment of chronic diseases: Inserts, patches, wafers, and implants

Non-oral long-acting drug delivery systems (LADDS) encompass a range of technologies for precisely delivering drug molecules into target tissues either through the systemic circulation or via localized injections for treating chronic diseases like diabetes, cancer, and brain disorders as well as for age-related eye diseases. LADDS have been shown to prolong drug release from 24 h up to 3 years depending on characteristics of the drug and delivery system. LADDS can offer potentially safer, more effective, and patient friendly treatment options compared to more invasive modes of drug administration such as repeated injections or minor surgical intervention. Whilst there is no single technology or definition that can comprehensively embrace LADDS; for the purposes of this review, these systems include solid implants, inserts, transdermal patches, wafers and in situ forming delivery systems. This review covers common chronic illnesses, where candidate drugs have been incorporated into LADDS, examples of marketed long-acting pharmaceuticals, as well as newly emerging technologies, used in the fabrication of LADDS.

Curcumin In Situ Gelling Polymeric Insert with Enhanced Ocular Performance

The search for an ocular drug delivery system that could provide long-acting effects without a detriment to the anatomy and physiology of the eye remains a challenge. Polyphenolic compounds (curcumin in particular) have recently gained popularity due to their powerful antioxidant properties; yet curcumin suffers poor stability and water solubility. A conventional eye drop formulation of curcumin in the form of a suspension is likely to suffer a short duration of action requiring multiple instillations. On the other hand, polymeric in-situ gelling inserts offer the prospect of overcoming these limitations. The aim of this study was to prepare, characterize and evaluate in vivo, polymeric, in-situ gelling and mucoadhesive inserts for ocular surface delivery of curcumin. Different types and ratios of biocompatible polymers (HPMC, CMC, PL 127 and PVA) and three plasticizers along with the solvent casting method were adopted to prepare curcumin inserts. The inserts were investigated for their physicochemical characteristics, applicability, and suitability of use for potential placement on the ocular surface. The prepared inserts revealed that curcumin was mainly dispersed in the molecular form. Insert surfaces remained smooth and uniform without cracks appearing during preparation and thereafter. Improved mechanical and mucoadhesive properties, enhanced in vitro release (7.5- to 9-fold increases in RRT₃₀₀ min) and transcorneal permeation (5.4- to 8.86-fold increases in Papp) of curcumin was achieved by selected in-situ gelling inserts compared to a control curcumin suspension. The developed inserts demonstrated acceptable ocular tolerability, enhanced corneal permeability, and sustained release of curcumin along with retention of insert formulation F7 on the ocular surface for at least two-hours. This insert provides a viable alternative to conventional eye drop formulations of curcumin.

Mechanical characteristics of orally disintegrating films: Comparison of folding endurance and tensile properties

The tensile test is the most widely used method for testing the mechanical characteristics of orally disintegrating films (ODFs). The other available test is the folding endurance (FE) test, which is more suitable for clarifying the actual strength during the manufacturing and dosing. However, the FE test is performed manually, and the FE number it generates has not been adequately analyzed as an index. The aim of this studies were to establish an automatic method for determining the FE number, and to compare the resulting FE numbers with the tensile properties. For this purpose, a desktop-model endurance test machine was used. First, the operating conditions-i.e., the folding angle, the folding speed and the weight requirement were optimized using ODF models. Secondly, the FE of ODFs prepared from three film formers (HPMC, HPC, and PVA) and with insoluble particles (calcium carbonate), plasticizers (glycerin) and APIs (acetaminophen), was evaluated and compared with the tensile properties. Lastly, the commercial ODFs were investigated. The results showed that our automatic system could be successfully used to determine the FE characteristics of ODFs. FE was suggested to relate to not only the strength but also the elongation during the tensile test.

Recent Advances in the Development of In Situ Gelling Drug Delivery Systems for Non-Parenteral Administration Routes

In situ gelling drug delivery systems have gained enormous attention over the last decade. They are in a sol-state before administration, and they are capable of forming gels in response to different endogenous stimuli, such as temperature increase, pH change and the presence of ions. Such systems can be administered through different routes, to achieve local or systemic drug delivery and can also be successfully used as vehicles for drug-loaded nano- and microparticles. Natural, synthetic and/or semi-synthetic polymers with in situ gelling behavior can be used alone, or in combination, for the preparation of such systems; the association with mucoadhesive polymers is highly desirable in order to further prolong the residence time at the site of action/absorption. In situ gelling systems include also solid polymeric formulations, generally obtained by freeze-drying, which, after contact with biological fluids, undergo a fast hydration with the formation of a gel able to release the drug loaded in a controlled manner. This review provides an overview of the in situ gelling drug delivery systems developed in the last 10 years for non-parenteral administration routes, such as ocular, nasal, buccal, gastrointestinal, vaginal and intravesical ones, with a special focus on formulation composition, polymer gelation mechanism and in vitro release studies.

Comparative analysis of pharmacokinetics of vancomycin hydrochloride in rabbits after ocular, intragastric, and intravenous administration by LC-MS/MS

The objective of this study was to compare the pharmacokinetics of vancomycin hydrochloride administered into rabbits through different routes and explore the feasibility of peptide drugs entering the systemic circulation through ocular administration. A convenient, accurate, and rapid liquid chromatography-trandem mass spectrometric (LC-MS/MS) method was established and used for the determination of vancomycin hydrochloride in rabbit plasma after intravenous administration (1.5 mg/kg), intragastric, and ocular administration (15 mg/kg). The pharmacokinetic parameters were analyzed using the DAS 2.0 software. We obtained a linear calibration curves vancomycin hydrochloride in plasma of rabbits over a concentration range of 0.05-10.0 μg/mL (R ² > 0.9995), the interassay accuracy was within 5%, precision of 1.66-3.38%, and recovery of >85%. No matrix effects were observed. The absolute bioavailability of vancomycin hydrochloride after intragastric and ocular administration was 1.0 and 7.3%, with the half-life values of 63.1 and 138.5 min, respectively. Therefore, the LC-MS/MS method established in this experiment was suitable for the determination of vancomycin hydrochloride. Vancomycin hydrochloride was rapidly absorbed into the blood circulation after ocular administration. Ocular administration was linked to higher bioavailability compared with intragastric administration, suggesting that the former will become a route for the delivery of peptide drugs.

Naltrexone as a Novel Therapeutic for Diabetic Corneal Complications

Diabetes is a widespread autoimmune disorder that affects nearly 10% of the adult population in the United States. In addition to the primary disease, there are numerous complications associated with inflammation including abnormalities of the heart, visual system, and peripheral nervous system. More than half of the individuals with diabetes will have one or more ocular related complications such as dry eye disease (DED), keratopathy, or retinopathy. Research over the last 3 decades has focused on the role of the opioid growth factor - opioid growth factor receptor (OGF-OGFr) axis as a regulatory system that maintains homeostasis in corneal epithelialization and tear secretion. In diabetes, OGF appears to be dysregulated resulting in decreased cell replication and increased corneal surface sensitivity. Utilization of naltrexone as a topical therapeutic to block the OGF-OGFr axis results in reversal of dry eye and restoration of corneal sensitivity and rates of corneal re-epithelialization. Naltrexone treatment at dosages that are substantially lower than systemically approved doses appear to be safe and effective therapy for corneal surface abnormalities associated with diabetes.

Chitosan/Poly(2-ethyl-2-oxazoline) Films with Ciprofloxacin for Application in Vaginal Drug Delivery

Chitosan (CHI) and chitosan/poly(2-ethyl-2-oxazoline) (CHI/POZ)-based films were prepared by casting from aqueous solutions of polymer blends with different compositions. Ciprofloxacin was used as a model drug in these formulations. The weight, thickness, folding endurance and transparency of blend films were measured and characterised. All films had a uniform thickness (0.06 ± 0.01 mm) and exhibited sufficient flexibility. The surface pHs of films ranged from 3.76 ± 0.49 to 4.14 ± 0.32, which is within the pH range suitable for vaginal applications. The cumulative release of the drug from the films in experiments in vitro was found to be 42 ± 2% and 56 ± 1% for pure CHI and CHI/POZ (40:60) films, respectively. Drug-free chitosan/poly(2-ethyl-2-oxazoline) films showed weak antimicrobial activity against Escherichia coli. Drug-loaded CHI and CHI/POZ films showed good antimicrobial properties against both Gram-positive Staphylococcus aureus and Gram-negative bacteria Escherichia coli. Mucoadhesive properties of these films with respect to freshly excised sheep vaginal mucosa were evaluated using a tensile method. It was established that all films were mucoadhesive, but an increase in POZ content in the blend resulted in a gradual reduction of their ability to stick to vaginal mucosa. These films could potentially find applications in vaginal drug delivery.

The proteolytic fraction from Vasconcellea cundinamarcensis accelerates wound healing after corneal chemical burn in rabbits

INTRODUCTION

Chemical ocular burns are among the most frequently eye-related injuries, which require immediate and intensive evaluation and care since they may lead to potential complications such as superinfection, corneal perforation, and blindness.Vasconcellea cundinamarcensis, a species from Caricaceae family, contains highly active proteolytic enzymes in its latex that show healing activity in animal models bearing lesions of different etiologies.

METHODS

We evaluate the ocular toxicity of the proteolytic fraction from V. cundinamarcensis (P1G10) by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and Hen's Egg Test-Chorioallantoic Membrane test. The corneal healing property of P1G10 was studied by the ethanol-chemical burn in the rabbit's eyes.

RESULTS

P1G10 is safe for ocular administration, except when administrated at 10μg/mL. P1G10 at 1μg/mL accelerates the corneal re-epithelization achieving complete wound closure after 72h of chemical burn. Also, P1G10 modulated the inflammatory response and controlled the arrangement of collagen fibers in the stroma, demonstrating its potential corneal healing properties.

CONCLUSIONS

Our work was the first one to evaluate the ophthalmic application of P1G10. Here we demonstrated that P1G10 is suitable for ocular administration and it has a promising corneal healing activity which may emerge as a new pharmacological tool to the development of a new drug for ocular surface chemical injuries in the future.

Efficacy and safety of a novel naltrexone treatment for dry eye in type 1 diabetes

Background

Dry eye disease (DED) is a prevalent complication of diabetes and presents as reduced tear production and/or increased corneal surface sensitivity often with secondary ocular surface changes. This study examined the safety and efficacy of a proprietary new eye drop formulation for topical treatment of DED.

Methods

Type 1 diabetes (T1D) was established in male Sprague-Dawley rats to study the efficacy and safety of the investigational compound that contained 20 μg/ml of naltrexone (NTX). Tear production was measured by the Schirmer’s 1 test, and ocular surface sensitivity was measured using an aesthesiometer. Diabetic rats received twice daily applications of a single drop (~ 0.02 ml) of the proprietary formulation (NTX-001) or vehicle onto one eye. For comparison, some diabetic rats received eye drops containing NTX in sterile Vigamox®. Safety was monitored by assessment of ocular histopathology in naïve male rats and naïve male rabbits receiving twice daily treatment of two drops for 30 days.

Results

Dry eye in T1D rats was reversed within hours of a single treatment of NTX-001, and over a period of 10 days NTX-001 restored corneal sensitivity and reversed dry eye relative to values measured in diabetic rats receiving vehicle. In comparison to NTX dissolved in Vigamox®, the proprietary NTX-001 was more effective at reversing dry eye. Safety studies in naïve rats and rabbits revealed no visible ocular pathology after 30 days of treatment.

Conclusions

An investigational new eye drop containing 20 μg/ml NTX effectively reversed tear film deficits and restored corneal surface sensitivity in diabetic animals without causing toxic side effects.

Betahistine dihydrochloride transdermal delivery via optimized thermosensitive gels: percutaneous absorption evaluation using rat growth as a biomarker

The aim of this study was to develop and optimize a betahistine dihydrochloride (BH) thermoreversible bioadhesive gel intended for transdermal delivery. The gels were obtained via cold method. A full factorial design was employed to investigate the joint effect of Poloxamer 407 concentration (18 and 20%), adhesive polymer type (Polyvinyl pyrolidone, Hydroxypropyl methylcellulose, and Carbopol 934), and adhesive polymer concentration (0.5 and 1.5%) on gelling temperature, viscosity at 37 °C, and adhesion strength. Data collected were analyzed using multiple linear regression. A desirability index approach with relative importance weight was used to choose the most desirable formulation. F4 (20% Poloxamer+1.5% Carbopol) was selected for further characterization. F4 released 96.97% drug in 12 h across hairless rat skin. F4 gelation temperature and time were 36 ± 0.35 °C, and 6 ± 0.7 min, respectively. F4 adhesive force was 8835.68 dyne/cm². F4 was tested for its appetite suppressing effect in a rat model and it was evaluated histopathologically. Rats' chow intake and weight gain was significantly decreased with no signs of inflammation or lipolysis when the optimized BH gel formulation, F4, was compared with untreated animals and animals treated with BH free gel. The results suggest that BH is percutaneously absorbed from the gel base and that the BH gel is tolerable. The desirability index approach with relative importance weight of responses was effective in determination of the optimum formulation. BH is systemically effective and well-tolerated when applied topically in hydrogel-based systems. The Carbopol-Poloxamer gel is a promising modality for transdermal delivery of BH.

A novel transdermal nanoethosomal gel of betahistine dihydrochloride for weight gain control: in-vitro and in-vivo characterization

Background

Betahistine dihydrochloride (BDH) is a histamine analog used to control weight gain, with short elimination half-life and gastric irritation as side effects.

Objective

The aim of the current investigation is to formulate and optimize a topical BDH ethosomal gel for weight gain control.

Materials and methods

Box–Behnken design was applied to study the effect of independent variables: phosphatidylcholine (PC), propylene glycol (PG), and ethanol on vesicle size; entrapment efficiency; % drug release; and flux. The morphology and zeta potential of the optimized formulation were evaluated. The % drug release, flux, and pharmacodynamics of the optimized formulation gel were studied.

Results

The size and entrapment efficiency percent had a direct positive relationship with the concentration of PC and negative relationship with ethanol and PG. The % drug release and flux decreased with increasing PC and PG, while ethanol enhanced both responses. Regression modeling indicated a good correlation between dependent and independent variables, where F16 was chosen as the optimized formulation. F16 showed well-defined spherical vesicles and zeta potential of −24 mV, and % release from the gel exceeded 99.5% over 16 h with the flux of 0.28 mg/cm²/h. Food intake and weight gain of rats were significantly decreased after transdermal application of the BDH ethosomal gel when compared with control, placebo, and BDH gel. The histopathological findings proved the absence of inflammation and decrease in adipose tissue.

Conclusion

Results obtained showed a significant, sustained transdermal absorption of BDH ethosomal gel and, consequently, a decrease in food intake and weight gain.

Prevention of Ophthalmia Neonatorum Caused by Neisseria gonorrhoeae Using a Fatty Acid-Based Formulation

Ophthalmia neonatorum, also called neonatal conjunctivitis, acquired during delivery can occur in the first 28 days of life. Commonly caused by the bacterial pathogen Neisseria gonorrhoeae, infection can lead to corneal scarring, perforation of the eye, and blindness. One approach that can be taken to prevent the disease is the use of an ophthalmic prophylaxis, which kills the bacteria on the surface of the eye shortly after birth. Current prophylaxes are based on antibiotic ointments. However, N. gonorrhoeae is resistant to many antibiotics and alternative treatments must be developed before the condition becomes untreatable. This study focused on developing a fatty acid-based prophylaxis. For this, 37 fatty acids or fatty acid derivatives were screened in vitro for fast antigonococcal activity. Seven candidates were identified as bactericidal at 1 mM. These seven were subjected to irritation testing using three separate methods: the bovine corneal opacity and permeability (BCOP) test; the hen’s egg test—chorioallantoic membrane (HET-CAM); and the red blood cell (RBC) lysis assay. The candidates were also tested in artificial tear fluid to determine whether they were effective in this environment. Four of the candidates remained effective. Among these, two lead candidates, monocaprin and myristoleic acid, displayed the best potential as active compounds in the development of a fatty acid-based prophylaxis for prevention of ophthalmia neonatorum.

Ophthalmia neonatorum is a painful bacterial infection of the eye in newborns. A common cause is Neisseria gonorrhoeae, which has the potential to cause severe damage to the eye and blindness. This study was designed to identify new and unconventional drug candidates that could be used in an eye ointment to prevent the development of this disease. The drugs that were tested were fatty acid-based compounds. The potential candidates were screened for their ability to kill bacteria in tear fluid without causing damage to the eye. This study identified seven candidates that are fast acting and nonirritating, with two strong candidates for potential use in the eye. Further development and testing are now required to formulate an eye treatment incorporating these drugs to prevent ophthalmia neonatorum.

Vitamin B12-Loaded Buccoadhesive Films as a Noninvasive Supplement in Vitamin B12 Deficiency: In Vitro Evaluation and In Vivo Comparative Study With Intramuscular Injection

This study aimed to formulate and evaluate vitamin B12-loaded buccal mucoadhesive hydrogel films. Various film formulations were prepared using chitosan and polyvinyl alcohol. The prepared films were characterized for thickness, weight variation, drug content, percentage moisture uptake and moisture content, surface pH, mechanical properties, in vitro release, and mucoadhesion. Vitamin B12 bioavailability from the optimized formulation was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neuroton^® I.M. injection was used for comparison. The films had acceptable mechanical and mucoadhesion properties. The percentages of moisture content of the optimized formulation were 3.2 ± 0.95, whereas the percentage drug released was 98.59 ± 1.41% at the end of 40 min. FTIR revealed the incidence of drug/polymer interaction. Differential scanning calorimetry revealed the possibility of the dispersion of cyanocobalamin in a molecular state with complete amorphization in the polymers. The estimated AUC_0-8h showed 1.5-fold increases in the bioavailability of cyanocobalamin from the optimized formulation compared with the marketed I.M. injection. These findings warrant that vitamin B12 buccal film formulation can be considered as an effective alternative portal with noninvasive and more convenient characteristics compared with the I.M. injection dosage form.

Poloxamer-based thermoresponsive ketorolac tromethamine in situ gel preparations: Design, characterisation, toxicity and transcorneal permeation studies

This study was aimed at preparing, characterising and evaluating in situ gel formulations based on a blend of two hydrophilic polymers i.e. poloxamer 407 (P407) and poloxamer 188 (P188) for a sustained ocular delivery of ketorolac tromethamine (KT). Drug-polymer interaction studies were performed using DSC and FT-IR. The gelation temperature (T_sol-gel), gelation time, rheological behaviour, mucoadhesive characteristics of these gels, transcorneal permeation and ocular irritation as well as toxicity was investigated. DSC and FT-IR studies revealed that there may be electrostatic interactions between the drug and the polymers used. P188 modified the T_sol/gel of P407 bringing it close to eye temperature (35°C) compared with the formulation containing P407 alone. Moreover, gels that comprised P407 and P188 exhibited a pseudoplastic behaviour at different concentrations. Furthermore, mucoadhesion study using mucin discs showed that in situ gel formulations have good mucoadhesive characteristics upon increasing the concentration of P407. When comparing formulations PP11 and PP12, the work of adhesion decreased significantly (P<0.001) from 377.9±7.79mNmm to 272.3±6.11mNmm. In vitro release and ex vivo permeation experiments indicated that the in situ gels were able to prolong and control KT release as only 48% of the KT released within 12h. In addition, the HET-CAM and BCOP tests confirmed the non-irritancy of KT loaded in situ gels, and HET-CAM test demonstrated the ability of ocular protection against strongly irritant substances. MTT assay on primary corneal epithelial cells revealed that in situ gel formulations loaded with KT showed reasonable and acceptable percent cell viability compared with control samples.

Critical appraisal of alternative irritation models: three decades of testing ophthalmic pharmaceuticals

BACKGROUND

Testing ocular tolerability of ocular pharmaceuticals is an essential regulatory requirement. The current approved reference model (gold standard) for ocular irritation testing is the Draize test. However this method is subjective and involves using live animals, hence the need to develop alternative in vitro and ex vivo testing strategies.

SOURCE OF DATA

Pubmed, Science Direct, Scopus, Google Scholar, Medline, Current Content, Web of Science and validation reports from international regulatory bodies; The Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) and European Centre for the Validation of Alternative Methods (ECVAM) were searched for in vitro alternatives.

AREA OF AGREEMENT

Whilst no single in vitro test can effectively replace the Draize eye irritation test, regulatory bodies and cosmetic/pharmaceutical industries agree that there is a need for in vitro alternatives with validated endpoints to evaluate pharmaceutical ingredients and finished eye products.

AREA OF CONTROVERSY

There is no single in vitro test / assay that can predict the ocular irritation potential of mild to moderate test substances.

AREA TIMELY FOR DEVELOPING RESEARCH

This review provides a critical appraisal of the selected in vitro and ex vivo ocular toxicity models recommended by international regulatory bodies. These include cytotoxicity methods, biochemical systems and ex vivo assays. The latter are approved by ECVAM as in vitro alternatives for the well-known Draize test. Hen's egg test-chorioallantoic membrane and the isolated rabbit eye test are also accepted by regulatory agencies in France, Germany, the Netherlands and the UK. A combination of ex vivo assays along with histological examination of excised bovine cornea can predict the conjunctival and corneal tolerability and cover a wider range of ocular pharmaceutical substances.