Core-shell chitosan/PVA-based nanofibrous scaffolds loaded with Satureja mutica or Oliveria decumbens essential oils as enhanced antimicrobial wound dressing

Developing novel hybrid bilayer nanofibers based on polylactic acid with impregnation of chamomile essential oil and gallic acid-stabilized silver nanoparticles

This study presents fabrication and characterization of novel chamomile essential oil (CMO)/gallic acid-stabilized silver nanoparticles (gallic acid-nanosilver, GNS), embedded into polylactic acid (PLA)-based hybrid bilayer nanofibers (NFs). Where CMO was impregnated into polyvinyl alcohol (PVA)-polyethylene glycol (PEG) solution and electrospun simultaneously with PLA to obtain PLA/PVA-PEG-CMO NFs (PLA/CMO A2). Meanwhile, GNS were added to PVA-PEG-CMO and electrospun to obtain PLA/PVA-PEG-CMO-GNS NFs (PLA/CMO-GNS A3). Where pure PLA/PVA-PEG NFs were coded pure PLA/A1. Physicochemical properties of fabricated bilayer-NFs were performed using various approaches. Besides, porosity%, swelling, biodegradability, CMO release pattern, antioxidant, antibacterial activity and cytotoxicity were investigated. Study investigation revealed PLA-based bilayer NFs exhibited a biphasic release profile for impregnated CMO. Due to presence of GA, antioxidant property and biocompatibility of PLA/CMO-GNS A3 was superior compared to pure PLA/A1 and PLA/CMO A2. Antibacterial activity was enhanced in presence of CMO in PLA/CMO A2 than pure PLA/A1. Furthermore, addition of GNS in PLA/CMO-GNS A3 displayed highest antibacterial activity due to synergy of CMO/GNS. Finally, MTT assay with HFB4 fibroblasts demonstrated absence of cytotoxicity of bilayer-based NFs. Thus, study suggests that developed PLA/PVA-PEG NFs could be a promising candidate for tissue regeneration and food edible packaging in particular when impregnated with both CMO/GNS.

Wound Dressing with Electrospun Core-Shell Nanofibers: From Material Selection to Synthesis

Skin, the largest organ of the human body, accounts for protecting against external injuries and pathogens. Despite possessing inherent self-regeneration capabilities, the repair of skin lesions is a complex and time-consuming process yet vital to preserving its critical physiological functions. The dominant treatment involves the application of a dressing to protect the wound, mitigate the risk of infection, and decrease the likelihood of secondary injuries. Pursuing solutions for accelerating wound healing has resulted in groundbreaking advancements in materials science, from hydrogels and hydrocolloids to foams and micro-/nanofibers. Noting the convenience and flexibility in design, nanofibers merit a high surface-area-to-volume ratio, controlled release of therapeutics, mimicking of the extracellular matrix, and excellent mechanical properties. Core-shell nanofibers bring even further prospects to the realm of wound dressings upon separate compartments with independent functionality, adapted release profiles of bioactive agents, and better moisture management. In this review, we highlight core-shell nanofibers for wound dressing applications featuring a survey on common materials and synthesis methods. Our discussion embodies the wound healing process, optimal wound dressing characteristics, the current organic and inorganic material repertoire for multifunctional core-shell nanofibers, and common techniques to fabricate proper coaxial structures. We also provide an overview of antibacterial nanomaterials with an emphasis on their crystalline structures, properties, and functions. We conclude with an outlook for the potential offered by core-shell nanofibers toward a more advanced design for effective wound healing.

Polymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review

Wound healing can result in complex problems, and discovering an effective method to improve the healing process is essential. Polymeric biomaterials have structures similar to those identified in the extracellular matrix of the tissue to be regenerated and also avoid chronic inflammation, and immunological reactions. To obtain smart and effective dressings, bioactive agents, such as essential oils, are also used to promote a wide range of biological properties, which can accelerate the healing process. Therefore, we intend to explore advances in the potential for applying hybrid materials in wound healing. For this, fifty scientific articles dated from 2010 to 2023 were investigated using the Web of Science, Scopus, Science Direct, and PubMed databases. The principles of the healing process, use of polymers, type and properties of essential oils and processing techniques, and characteristics of dressings were identified. Thus, the plants Syzygium romanticum or Eugenia caryophyllata, Origanum vulgare, and Cinnamomum zeylanicum present prospects for application in clinical trials due to their proven effects on wound healing and reducing the incidence of inflammatory cells in the site of injury. The antimicrobial effect of essential oils is mainly due to polyphenols and terpenes such as eugenol, cinnamaldehyde, carvacrol, and thymol.

Oliveria decumbens, a Long-Neglected Plant with Promising Phytochemical and Biological Properties

Oliveria decumbens is a folkloric medicinal plant belonging to the Apiaceae family, traditionally utilized to treat various diseases like gastrointestinal disorders, fever, and wounds. This review aims to provide a comprehensive overview of the plant's phytochemical composition and biological properties, with potential implications for various industries and avenues of further research. The data presented here has been compiled through searches utilizing the keyword "Oliveria" across scientific databases such as PubMed, Web of Science, Scopus, ScienceDirect, and SciFinder. Carvacrol and thymol have been identified as the primary volatile constituents, though the complete profile of the plant extract remains to be fully elucidated. Notably, Oliveria decumbens essential oil exhibits significant antibacterial, antifungal, antioxidant, and anticancer properties. Additionally, the plant extract demonstrates promising antiprotozoal, antiviral, hepatoprotective, and immunostimulant effects, although these findings are primarily derived from preliminary studies. While in vitro and in vivo investigations have validated some traditional uses of O. decumbens, further pre-clinical testing is warranted to ascertain both efficacy and safety profiles. Moreover, the identification of specific components within the plant extract is crucial for a more comprehensive understanding of the mechanisms of action underlying its therapeutic properties within the realm of phytomedicine.

Electrospun wound dressings with antibacterial function: a critical review of plant extract and essential oil incorporation

Among the many different types of wound dressings, nanofiber-based materials produced through electrospinning are claimed to be ideal because of their advantageous intrinsic properties and the feasibility of employing several strategies to load bioactive compounds into their structure. Bioactive compounds with antimicrobial properties have been incorporated into different wound dressings to promote healing as well as prevent and treat bacterial infections. Among these, natural products, such as medicinal plant extracts and essential oils (EOs), have proven particularly attractive thanks to their nontoxic nature, minor side effects, desirable bioactive properties, and favorable effects on the healing process. To this end, the present review provides an exhaustive and up-to-date revision of the most prominent medicinal plant extracts and EOs with antimicrobial properties that have been incorporated into nanofiber-based wound dressings. The most common methods used for incorporating bioactive compounds into electrospun nanofibers include: pre-electrospinning (blend, encapsulation, coaxial, and emulsion electrospinning), post-electrospinning (physical adsorption, chemical immobilization, and layer-by-layer assembly), and nanoparticle loading. Furthermore, a general overview of the benefits of EOs and medicinal plant extracts is presented, describing their intrinsic properties and biotechniques for their incorporation into wound dressings. Finally, the current challenges and safety issues that need to be adequately clarified and addressed are discussed.

Multilayer PVA/gelatin nanofibrous scaffolds incorporated with Tanacetum polycephalum essential oil and amoxicillin for skin tissue engineering application

Wound infection is still an important challenge in healing of different types of skin injuries. This highlights the need for new and improved antibacterial agents with novel and different mechanisms of action. In this study, by electrospinning process Tanacetum polycephalum essential oil (EO), as a natural antibacterial and anti-inflammatory agent, along with Amoxicillin (AMX) as an antibiotic are incorporated into PVA/gelatin-based nanofiber mats individually and in combination to fabricate a novel wound dressing. Briefly, we fabricated PVA/gelatin loaded by Amoxicillin as first layer for direct contact with wound surface to protects the wound from exogenous bacteria, and then built a PVA/gelatin/Tanacetum polycephalum essential oil layer on the first layer to help cleanses the wound from infection and accelerates wound closure. Finally, PVA/gelatin layer as third layer fabricated on middle layer to guarantee desirable mechanical properties. For each layer, the electrospinning parameters were adjusted to form bead-free fibers. The morphology of fabricated nanofiber scaffolds was characterized by Fourier-transform infrared (FTIR) and scanning electron microscopy (SEM). Microscopic images demonstrated the smooth bead-free microstructures fabrication of every layer of nanofiber with a uniform fiber size of 126.888 to 136.833 nm. While, EO and AMX increased the diameter of nanofibers but there was no change in physical structure of nanofiber. The water contact angle test demonstrated hydrophilicity of nanofibers with 47.35°. Although EO and AMX had little effect on reducing hydrophilicity but nanofibers with contact angle between 51.4° until 65.4° are still hydrophilic. Multilayer nanofibers loaded by EO and AMX killed 99.99 % of both gram-negative and gram-positive bacteria in comparison with control and PVA/gelatin nanofiber. Also, in addition to confirming the non-toxicity of nanofibers, MTT results also showed the acceleration of cell proliferation. In vivo wound evaluation in mouse models showed that designed nanofibrous scaffolds could be an appropriate option for wound treatment due to their positive effect on angiogenesis, collagen deposition, granulation tissue formation, epithelialization, and wound closure.

Essential Oils Infused Poly-ε-Caprolactone/Gelatin Electrospun Nanofibrous Mats: Biocompatibility and Antibacterial Study

Infections caused by antibiotic-resistant pathogens result in a delayed wound-healing process. As an approach to prevent infections, alternatives in the form of natural antimicrobial products have become public interest. Essential oils derived from plants are used as antimicrobials owing to their broad-spectrum activity against pathogenic organisms. In this study, essential oil from seeds of watermelon, jackfruit, and papaya was incorporated into poly-ε-caprolactone/gelatin nanofibers using an electrospinning technique. The synthesized nanofibers were smooth, continuous, and bead-free. The nanofibers were found to be mechanically competent as confirmed by the universal tensile tester. The antibacterial activity of the various essential oil-loaded nanofibrous mats was determined by disc diffusion assay. Furthermore, they were found to be non-toxic and biocompatible by MTT and CMFDA assays on fibroblast cells. The obtained results have demonstrated that essential oil-loaded nanofiber mats are promising alternatives to conventional antibacterial wound dressings.

Rapid fabrication of micro-nanofibers from grapevine leaf extract and gelatine via electroblowing: A novel approach for edible active food packaging

The objective of this study was to develop novel micro-nanofibers for food packaging using grapevine extract (GLP) and gelatine using electroblowing technique. The identified components of GLP were dominated by the flavone group phenolics, as analyzed by LC-MS/MS. SBS was used to fabricate gelatine micro-nanofiber mats loaded with three different concentrations of GLP, which were subsequently cross-linked. The micro-nanofibers were characterized by their morphology, chemistry, thermal properties, and bioactivity. The in-vitro antioxidant and antimicrobial effects of the nanofiber mats were determined using various methods, which showed an increase in effectiveness with increasing GLP concentration. The in-situ assessment, where the nanofibers were applied to cheese, also showed a consistent improvement in shelf life with the use of GLP-loaded gelatin electroblown fibers.

HPLC- and NMR-Based Chemical Profiling, Wound-Healing Potential, Anti-Inflammatory and Antibacterial Activities of Satureja pilosa (Lamiaceae), a Neglected Medicinal-Aromatic Herb

Satureja pilosa Velen. (Lamiaceae) is a perennial and melliferous aromatic-medicinal subshrub which is range-restricted in adjacent parts of Greece and Bulgaria and locally in Italy, known in Northern Greece as wild oregano ("agriorigani") and traditionally collected from the wild for culinary purposes. Since the ethnopharmacological data and modern biological activities of Satureja spp. suggest promising applications in skin conditions, the present study aimed to investigate the hitherto unknown phenolic content of cultivated S. pilosa and its potential biological activities, focusing mainly on wound-healing and anti-inflammatory effects. An HPLC-PDA-MS-targeted phytochemical investigation, along with NMR, allowed for the isolation and characterization of the main constituents, resulting in 18 compounds. Representative extracts and purified compounds were tested for wound-healing activity on NIH/3T3 fibroblasts. The butanol extract exhibited a significantly higher cell migration rate (73.4%) compared to aqueous (50.6%) and methanolic (49.6%) ones, enhancing the cell migration more rapidly at both concentration levels, whilst rosmarinic acid was the most potent among the isolated compounds, with a migration rate of 64.0% at the concentration level of 10-5 mg/mL, followed by 3,4-dihydrophenyllactic acid (54.7%). Moreover, potential effects on endothelial activation processes were explored, including the leukocyte-endothelial cell interaction during inflammatory processes and the migratory capacity during angiogenic actions, since these processes are commonly associated with skin diseases. Finally, extracts and purified compounds demonstrated weak antibacterial potential against two important pathogens (Staphylococcus aureus and Pseudomonas aeruginosa), suggesting that further investigation is warrented.

The efficacy of complementary treatment with marshmallow (Althaea officinalis L.) on vulvovaginal candidiasis: A randomized double-blinded controlled clinical trial

BACKGROUND

Vulvovaginal candidiasis is a common gynecologic infection, and recurring cases are yet incurable. This trial was based on Persian medicine to compare how effective marshmallow aqueous extract 4% plus clotrimazole 1% (CLOT-M) is compared to clotrimazole 1% vaginal creams on VVC.

METHODS

This study randomly assigned 100 women with VVC into two groups. The target group (n = 50) was treated with CLOT-M while controls (n = 50) with clotrimazole vaginal creams for seven consecutive nights. Different VVC symptoms and signs, and yeast culture from vaginal discharge were evaluated as the outcome measures before the intervention and 7 and 30 days after.

RESULTS

The efficacy of CLOT-M vaginal cream was assessed during the 1st and 2nd follow-ups, indicating a significant decrease in mean itching (P = 0.001 for both comparisons) and dyspareunia score (P = 0.001 and P = 0.04, respectively) as compared to treatment with clotrimazole vaginal cream. Moreover, after 7 days of the intervention, patients in the CLOT-M group experienced significant improvement in mean dysuria score compared to those in the control group (P = 0.001). Neither cream caused any significant adverse events.

CONCLUSION

It seems that CLOT-M vaginal cream had a significant effect on the VVC symptoms improvement, without any significant side effects. However, larger sample-sized trials are needed for more evidence-based judgment.

Adhesive and biodegradable polymer mixture composed of high -biosafety pharmaceutical excipients as non-setting periodontal dressing

Periodontal dressing is a surgical dressing applied to oral wounds after periodontal surgery. Currently, all commercially available setting periodontal dressings are stiff, uncomfortable, with poor aesthetics, and need to be removed at the patient's follow-up visit, which may cause secondary damage. A periodontal dressing with soft texture, biodegradable properties, and that could balance both comfort and aesthetics is urgently desired. Hence, non-setting and degradable dressings were developed using sodium carboxymethyl cellulose, Eudragit S 100 and povidone K30, which were compared with the commercial degradable dressing Reso-pac®. The mucosal adhesion of the dressings was evaluated by lap shear tests, which indicated adequate adhesion. The in vitro swelling rates of the dressings were approximately half that of Reso-pac®, which led to less saliva adsorption and better dimensional stability. The dressings also exhibited satisfactory biocompatibility according to the results of CCK-8, Live/Dead staining, hemolysis, and subcutaneous implantation assays. Moreover, the dressing promoted the healing of full-thickness mucosal wounds in the palatal gingivae of SD rats and contributed to better therapeutic effect than Reso-pac®. Considering the multiple advantages and the pure pharmaceutical excipient formula, we anticipate that this dressing could be a promising product and may enter clinical practice in the near future.

Chitosan-based emulgel and xerogel film containing Thymus pubescens essential oil as a potential wound dressing

Controlling the wound exudates accompanied by microbial wound infections has still remained as one the most challenging clinical issues. Herein, a chitosan/gelatin/polyvinyl alcohol xerogel film containing Thymus pubescens essential oil is fabricated for antimicrobial wound dressing application. The chemical and physical characteristics of the devised formulation is characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscope, and tensile tests. Moreover, swelling capability, water vapour transmission rate, water contact angle, solubility, moisture content, and release properties are also studied. The antimicrobial and antibiofilm tests are performed using the broth microdilution and XTT assay, respectively. The produced formulation shows excellent antimicrobial efficacy against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Candida species. It is also demonstrated that the obtained film can reduce (∼80 %) Candida albicans biofilm formation, and its biocompatibility is confirmed with MTT (∼100 %) and hemolysis tests. The antimicrobial activity can be correlated to the microbial membrane attraction for Candida albicans cells, illustrated by flow cytometry. This proposed film with appropriate mechanical strength, high swelling capacity in different pH values (∼200-700 %), controlled release property, and antimicrobial and antioxidant activities as well as biocompatibility can be used as a promising candidate for antimicrobial wound dressing applications.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Wound healing performance of electrospun PVA/70S30C bioactive glass/Ag nanoparticles mats decorated with curcumin: In vitro and in vivo investigations

Biocompatible fibrous scaffold containing polyvinyl alcohol (PVA), 70S30C bioactive glass (BG), silver (Ag) nanoparticles and curcumin (Cur) was fabricated through electrospinning method. Scanning electron microscope (SEM) and Field emission scanning electron microscopy (FESEM) were employed to investigate the morphological characteristics of the scaffolds. In addition, biodegradability, hydrophilicity, and contact angle were studied as criteria for evaluating physical properties of the scaffolds. Tensile strength was reported to be 0.971 ± 0.093 MPa. Also, the viability of fibroblasts after 7 days of cell culture was 93.58 ± 1.36 %. The antibacterial activity against Escherichia coli and Staphylococcus aureus bacteria was illustrated using inhibition zones of 13.12 ± 0.69 and 14.21 ± 1.37 mm, respectively. Histological results revealed that tissue regeneration after 14 days of surgery was much higher for the dressing group compared to the blank group. According to the obtained results, the authors introduce the PVA-BG-Ag-Cur scaffold as a promising candidate for skin tissue engineering applications.

Phytochemistry of Oliveria decumbens Vent. (Apiaceae) and its therapeutic potential: A systematic review

Oliveria decumbens Vent., an annual herb resistant to harsh environmental conditions, is an aromatic medicinal plant of the Apiaceae family. O. decumbens has numerous pharmacological, food and feed, and cosmetic applications. This species is endemic to Iran, Iraq, and Turkey. Published literature, available until 30 November 2022 on the morphology, phytochemistry, and bioactivity of O. decumbens, has been reviewed, and appraised for the potential therapeutic potential of this species, utilizing the databases, Web of Science, Google Scholar, PubMed, and Dictionary of Natural Products. The search term used was O. decumbens. Some manuscripts were issued on the chemical components of O. decumbens essential oil (EO) and various extracts. The EO of O. decumbens was evaluated for its chemical composition and medicinal potential against various diseases. Thymol and carvacrol constituted the primary oxygenated monoterpenes detected in substantial amounts within the EO. Additionally, diverse metabolites of O. decumbens were examined for their bactericidal, antioxidant, larvicidal, and immunomodulatory effects. This review article discusses morphology, phenology, and geographical distribution of O. decumbens and presents a critical appraisal of its phytochemistry and therapeutic potential as documented in the published literature.

Structure-based drug discovery and antimicrobial activity of ciprofloxacin-grafted Ugi adducts

A new series of ciprofloxacin-derived Ugi adducts were rationally designed and synthesized. The synthesized molecules were explored for their potential antimicrobial activities against four pathogenic microorganisms. Among these derivatives, compound 7h with a 4-nitrophenyl substituent at R2 exhibited significant activity against two tested Gram-positive bacteria with a minimum inhibitory concentration value of 0.097 µg/mL while 7i bearing 4-chlorophenyl pendant demonstrated the best antimicrobial activities against Gram-negative bacteria. Furthermore, the analysis of the structure-activity relationships disclosed that types of substitutions differently affect the bacteria so the most potent derivative against Gram-negative infections was the least active one in Gram-positive microorganisms. Also, the molecular docking and molecular dynamic simulations were executed on 7i as the most potent Gram-negative anti-bacterial agent against ATP-binding sites of DNA gyrase B. Accordingly, our findings suggest that ciprofloxacin-based Ugi adducts are an interesting precursor for the design of potent antimicrobial agents.Communicated by Ramaswamy H. Sarma.

Polymeric biomaterials for wound healing

Skin indicates a person's state of health and is so important that it influences a person's emotional and psychological behavior. In this context, the effective treatment of wounds is a major concern, since several conventional wound healing materials have not been able to provide adequate healing, often leading to scar formation. Hence, the development of innovative biomaterials for wound healing is essential. Natural and synthetic polymers are used extensively for wound dressings and scaffold production. Both natural and synthetic polymers have beneficial properties and limitations, so they are often used in combination to overcome overcome their individual limitations. The use of different polymers in the production of biomaterials has proven to be a promising alternative for the treatment of wounds, as their capacity to accelerate the healing process has been demonstrated in many studies. Thus, this work focuses on describing several currently commercially available solutions used for the management of skin wounds, such as polymeric biomaterials for skin substitutes. New directions, strategies, and innovative technologies for the design of polymeric biomaterials are also addressed, providing solutions for deep burns, personalized care and faster healing.

Wound Dressing Modifications for Accelerated Healing of Infected Wounds

Infections that occur during wound healing involve the most frequent complications in the field of wound care which not only inhibit the whole process but also lead to non-healing wound formation. The diversity of the skin microbiota and the wound microenvironment can favor the occurrence of skin infections, contributing to an increased level of morbidity and even mortality. As a consequence, immediate effective treatment is required to prevent such pathological conditions. Antimicrobial agents loaded into wound dressings have turned out to be a great option to reduce wound colonization and improve the healing process. In this review paper, the influence of bacterial infections on the wound-healing phases and promising modifications of dressing materials for accelerated healing of infected wounds are discussed. The review paper mainly focuses on the novel findings on the use of antibiotics, nanoparticles, cationic organic agents, and plant-derived natural compounds (essential oils and their components, polyphenols, and curcumin) to develop antimicrobial wound dressings. The review article was prepared on the basis of scientific contributions retrieved from the PubMed database (supported with Google Scholar searching) over the last 5 years.

Chitosan electrospun nanofibers derived from Periplaneta americana residue for promoting infected wound healing

Periplaneta americana has been used medicinally for years to treat a wide variety of skin lesions or ulcers. However, a sizable portion of the drug residues that are retained after extraction are routinely thrown away, thus posing a hazard to the environment and depleting resources. In this study, low molecular weight Periplaneta americana chitosan (LPCS) and high molecular weight Periplaneta americana chitosan (HPCS) were extracted from Periplaneta americana residue (PAR) based on the conventional acid-base method and two deacetylation methods. Moreover, the physicochemical properties and structural differences between the above two chitosan and commercial chitosan (CS) were compared using different methods. Next, two nanofibers comprising different ratios of Periplaneta americana chitosan (LPCS or HPCS), polyvinyl alcohol (PVA), and polyethylene oxide (PEO) were prepared and optimized. The above nanofibers exhibited excellent mechanical properties, antibacterial properties, and biocompatibility while facilitating wound healing in an infected rat whole-layer wound model by promoting wound closure, epithelialization, collagen deposition, and inflammation reduction. In brief, this study produced an effective and affordable wound dressing and offered a suggestion for the comprehensive utilization of Periplaneta americana residue.

Extraction and characterization of chitosan from Eupolyphaga sinensis Walker and its application in the preparation of electrospinning nanofiber membranes

Due to its capabilities for wound healing, antimicrobial defense, hemostasis, and biodegradation, chitosan has seen increased use in biomedical disciplines in recent years. In the meantime, efforts have been made to develop and use insect chitosan as a source to address the seasonal, irritating, and regional shortcomings of traditional shrimp and crab chitosan. In this study, a new type of insect chitosan (DCS) was first extracted from Eupolyphaga sinensis Walker by a low-temperature intermittent method and was compared with commercially available pharmaceutical chitosan (CS). Firstly, the degree of deacetylation and molecular weight of DCS were determined, and DCS was characterized by FT-IR, ¹H NMR, XRD, and TGA-DTG. On this basis, DCS was mixed with PVA and PEO to create a novel electrospun nanofiber membrane. The air permeability, antibacterial properties, and biocompatibility of the nanofiber membrane were evaluated, as well as the membrane's shape, structure, and mechanical characteristics. Finally, the activity of nanofiber membranes in promoting wound healing was verified with a rat full-thickness skin defect model, hoping to provide a reference for the development of new drug delivery carriers and wound dressings.

Incorporation of Saqez essential oil into polyvinyl alcohol/chitosan bilayer hydrogel as a potent wound dressing material

Nowadays, many studies are conducted on multilayer hydrogels for wound dressing. On the other hand, considering the emergence of bacterial resistance to common antibiotics, studies on the use of natural essential oils and their derivatives that have antibacterial and antioxidant activity can be useful. Herein, a novel bilayer hydrogel developed from polyvinyl alcohol and chitosan with the incorporation of Saqez essential oil (SEO) was synthesized. The results showed a gel-type structure with specific compression and flexibility, while the microscopic images confirmed the formation of a bilayer hydrogel. Further, the data showed that increasing the concentration of SEO reduces the swelling and water vapor permeability and increases the water retention and hydrophobicity of the hydrogel surface. The effects of the combination of SEO in the bilayer hydrogel led to a strong antioxidant property and increased antimicrobial activity. Also, the in vitro results demonstrated that the bilayer hydrogels are biocompatible, non-toxic, and blood compatible. Finally, the results of the in vivo tests showed that these bilayer hydrogels had good homeostatic efficiency. Overall, the obtained results indicate that these bilayer hydrogels are promising candidates for wound dressing.

Recent Progress of Electrospun Herbal Medicine Nanofibers

Herbal medicine has a long history of medical efficacy with low toxicity, side effects and good biocompatibility. However, the bioavailability of the extract of raw herbs and bioactive compounds is poor because of their low water solubility. In order to overcome the solubility issues, electrospinning technology can offer a delivery alternative to resolve them. The electrospun fibers have the advantages of high specific surface area, high porosity, excellent mechanical strength and flexible structures. At the same time, various natural and synthetic polymer-bound fibers can mimic extracellular matrix applications in different medical fields. In this paper, the development of electrospinning technology and polymers used for incorporating herbal medicine into electrospun nanofibers are reviewed. Finally, the recent progress of the applications of these herbal medicine nanofibers in biomedical (drug delivery, wound dressing, tissue engineering) and food fields along with their future prospects is discussed.

New thioxothiazolidinyl-acetamides derivatives as potent urease inhibitors: design, synthesis, in vitro inhibition, and molecular dynamic simulation

To identify potent urease inhibitors, in the current study, a series of thioxothiazolidinyl-acetamides were designed and synthesized. The prepared compounds were characterized by spectroscopic techniques, including FTIR, ¹HNMR, ¹³CNMR, and elemental analysis. In the enzymatic assessments, it was demonstrated that all derivatives had significant urease inhibition with IC₅₀ values in the range of 1.473-9.274 µM in comparison with the positive control hydroxyurea (IC₅₀ = 100.21 ± 2.5 µM) and thiourea (IC₅₀ = 23.62 ± 0.84 µM). Compound 6i (N-benzyl-3-butyl-4-oxo-2-thioxothiazolidine-5-carboxamide) was the most active agent with an IC₅₀ value of 1.473 µM. Additionally, kinetic investigation and in silico assessments of 6i was carried out to understand the type of inhibition and behavior of the most potent derivative within the binding site of the enzyme. Noteworthy, the anti-urease assay against P. vulgaris revealed 6e and 6i as the most active agents with IC₅₀ values of 15.27 ± 2.40 and 17.78 ± 3.75 µg/mL, respectively. Antimicrobial evaluations of all compounds reveal that compounds 6n and 6o were the most potent antimicrobial agents against the standard and resistant S. aureus. 6n and 6o also showed 37 and 27% inhibition in the development of biofilm by S. aureus at 512 µg/ml. Furthermore, the MTT test showed no toxicity up to 100 µM. Taken together, the study suggests that the synthesized thioxothiazolidinyl-acetamides bases derivatives may serve as potential hits as urease inhibitors.

The effect of hydroalcoholic extract of Psidium guajava L. on experimentally induced oral mucosal wound in rat

Background

The aim of this study was to evaluate the biological effects of hydroalcoholic extract of Psidium guajava L leaves and phenytoin as a standard agent on the induced oral mucosal wound.

Methods

Hundred seventy Sprague Dawley rats were grouped in 5 clusters randomly. Oral mucosal wounds were induced in all rats except for the control group. Phenytoin and guajava leaf extract were used as a mouthwash. Twelve rats from the 5 groups were euthanized on day 7^th and 10^th, and 10 rats from each group were sacrificed on the 14^th day. Interleukin-6 and total antioxidant capacity were determined in the serum. The tissues were evaluated for pathological and stereological assessments. Phytochemical analyses were performed on the hydroalcoholic extract of Psidium guajava L to determine the antioxidant potency.

Results

Total phenolic content test and DPPH analysis demonstrated the high potential of antioxidant capacity of Psidium guajava L. Decreasing IL-6 and increasing TAC were seen in the guajava hydroalcoholic extract and phenytoin groups. The difference of IL-6 between the wound treated guajava group and the wounded group was significant. The wound treated guajava group and wound treated phenytoin group on the 14^th day increased the number of fibroblast cells and volume density of sub-mucosae effectively to the same thickness to be considered as a healed sub-mucosae layer. The volume density of the epithelium changes showed statistically significant different responses based on gender.

Conclusion

In conclusion, hydroalcoholic extract of Psidium guajava L leaves might exert theraputic effects on oral mucositis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12906-022-03655-5.

Design, synthesis, spectroscopic characterization, in vitro tyrosinase inhibition, antioxidant evaluation, in silico and kinetic studies of substituted indole-carbohydrazides

In the current study, twenty-five indole-carbohydrazide derivatives linked to different aryl substitutions were rationally designed and synthesized. The structures of all derivatives were confirmed using different spectroscopic techniques including ¹H NMR, ¹³C NMR, Mass spectrometry, and elemental analysis. The tyrosinase inhibitory activities of all synthetic compounds exhibited IC₅₀ values in the range of 0.070 to > 100 μM. Structure-activity relationships showed that compounds 4f (R = 4-OH, IC₅₀ = 0.070 μM), 8f (R = 4-OH, IC₅₀ = 0.072 μM), and 19e (IC₅₀ = 0.19 μM) with para-OH substituent at the R position was found to be the most active members of all three tested series. Kinetic studies exhibited that compounds 4f, 8f, and 19e are mixed-type inhibitors. Furthermore, toxicity and cell-based anti-melanogenesis assessments were performed on the most potent derivatives and it was shown that 4f, 8f, and 19e had no toxicity at 8 µM and reduced the percent of melanin content to 68.43, 72.61, 73.47 at 8 μM, respectively. In silico analyses of absorption, distribution, metabolism, and excretion (ADME) profile of synthesized compounds showed that these molecules followed drug-likeness rules and acceptable predictive ADMET features. Results of the docking study were almost in line with biological results with ChemPLP values of 53.56 to 79.33. Also, the docking study showed the critical interactions of potent inhibitors with the active site of the enzyme which affects the potency of the synthesized hybrids. Based on molecular dynamic simulations, compound 4f exhibited pronounced interaction with the critical residues of the tyrosinase active site so that the indole ring participated in H-bond interaction with Gly281 and 4-hydroxy benzylidene recorded another H-bond interaction with Asp289 plus hydrophobic interactions with Phe292. Hydrazide linker also exhibited three H-bond interactions with His263 and Gly281.

Production and application of biomaterials based on polyvinyl alcohol (PVA) as wound dressing: A mini review

The development of ideal wound dressing with excellent properties, such as exudate absorption capacity, drug release control ability, and increased wound healing, is currently a major requirement for wound healing. Polyvinyl alcohol (PVA) is a biodegradable semi-crystalline synthetic polymer that has been used in the field of biotechnology such as tissue regeneration, wound dressing, and drug delivery systems. In recent years, PVA-based wound dressing materials have received considerable attention due to their excellent properties such as biodegradability, biocompatibility, non-toxicity and low cost. PVA can be used as a wound dressing material to create the necessary moist wound environment, improve the physical properties of the dressing, and increase the wound healing rates. In addition, PVA can also be mixed with other organic and inorganic materials and can be used for drug delivery and wound healing. This review article addresses the role of biomaterials based on PVA mixed with other ingredients for wound dressing. It also focuses on its recent use in wound dressings as carriers of active substances.

Essential Oil—Loaded Nanofibers for Pharmaceutical and Biomedical Applications: A Systematic Mini-Review

Essential oils (EOs) have been widely exploited for their biological properties (mainly as antimicrobials) in the food industry. Encapsulation of EOs has opened the way to the utilization of EOs in the pharmaceutical and biomedical fields. Electrospinning (ES) has proved a convenient and versatile method for the encapsulation of EOs into multifunctional nanofibers. Within the last five years (2017–2022), many research articles have been published reporting the use of ES for the fabrication of essential oil—loaded nanofibers (EONFs). The objective of the present mini-review article is to elucidate the potential of EONFs in the pharmaceutical and biomedical fields and to highlight their advantages over traditional polymeric films. An overview of the conventional ES and coaxial ES technologies for the preparation of EONFs is also included. Even though EONFs are promising systems for the delivery of EOs, gaps in the literature can be recognized (e.g., stability studies) emphasizing that more research work is needed in this field to fully unravel the potential of EONFs.

Strong, Water-Resistant, and Ionic Conductive All-Chitosan Film with a Self-Locking Structure

Renewable and biodegradable natural polymeric materials are attractive candidates for replacing nonbiodegradable plastics. However, it is challenging to fabricate polysaccharide-based materials (such as cellulose and chitin) that can be used in humid or even watery environments due to their inferior stability against water. Here, a self-locking structure is constructed to develop a strong, water-resistant, and ionic conductive all-chitosan film without other additives. The densely packed self-locking structure introduces strong interactions between chitosan nanofibers, preventing the fibers from disentangling even in watery environments. The resulting film exhibits outstanding tensile strength of ∼144 MPa, superior wet strength of ∼54.3 MPa, and high ionic conductivity of 0.0012 S/cm at 10-4 M KCl, which are significantly higher than those of conventional polysaccharide-based materials and many commercially used plastics. Additionally, it also possesses outstanding flexibility, excellent thermal stability, good antimicrobial ability, and biodegradability, which make it a promising eco-friendly alternative to plastics for many potential applications, such as packaging bags, drinking straws, and ion regulation membranes.

Marine Biopolymers as Bioactive Functional Ingredients of Electrospun Nanofibrous Scaffolds for Biomedical Applications

Marine biopolymers, abundantly present in seaweeds and marine animals, feature diverse structures and functionalities, and possess a wide range of beneficial biological activities. Characterized by high biocompatibility and biodegradability, as well as unique physicochemical properties, marine biopolymers are attracting a constantly increasing interest for the development of advanced systems for applications in the biomedical field. The development of electrospinning offers an innovative technological platform for the production of nonwoven nanofibrous scaffolds with increased surface area, high encapsulation efficacy, intrinsic interconnectivity, and structural analogy to the natural extracellular matrix. Marine biopolymer-based electrospun nanofibrous scaffolds with multifunctional characteristics and tunable mechanical properties now attract significant attention for biomedical applications, such as tissue engineering, drug delivery, and wound healing. The present review, covering the literature up to the end of 2021, highlights the advancements in the development of marine biopolymer-based electrospun nanofibers for their utilization as cell proliferation scaffolds, bioadhesives, release modifiers, and wound dressings.

Electrospun Polymer Nanofibers with Antimicrobial Activity

Nowadays, nanofibers with antimicrobial activity are of great importance due to the widespread antibiotic resistance of many pathogens. Electrospinning is a versatile method of producing ultrathin fibers with desired properties, and this technique can be optimized by controlling parameters such as solution/melt viscosity, feeding rate, and electric field. High viscosity and slow feeding rate cause blockage of the spinneret, while low viscosity and high feeding rate result in fiber discontinuities or droplet formation. The electric field must be properly set because high field strength shortens the solidification time of the fluid streams, while low field strength is unable to form the Taylor cone. Environmental conditions, temperature, and humidity also affect electrospinning. In recent years, significant advances have been made in the development of electrospinning methods and the engineering of electrospun nanofibers for various applications. This review discusses the current research on the use of electrospinning to fabricate composite polymer fibers with antimicrobial properties by incorporating well-defined antimicrobial nanoparticles (silver, titanium dioxide, zinc dioxide, copper oxide, etc.), encapsulating classical therapeutic agents (antibiotics), plant-based bioactive agents (crude extracts, essential oils), and pure compounds (antimicrobial peptides, photosensitizers) in polymer nanofibers with controlled release and anti-degradation protection. The analyzed works prove that the electrospinning process is an effective strategy for the formation of antimicrobial fibers for the biomedicine, pharmacy, and food industry.

Advances in microfabrication technologies in tissue engineering and regenerative medicine

BACKGROUND

Tissue engineering provides various strategies to fabricate an appropriate microenvironment to support the repair and regeneration of lost or damaged tissues. In this matter, several technologies have been implemented to construct close-to-native three-dimensional structures at numerous physiological scales, which are essential to confer the functional characteristics of living tissues.

METHODS

In this article, we review a variety of microfabrication technologies that are currently utilized for several tissue engineering applications, such as soft lithography, microneedles, templated and self-assembly of microstructures, microfluidics, fiber spinning, and bioprinting.

RESULTS

These technologies have considerably helped us to precisely manipulate cells or cellular constructs for the fabrication of biomimetic tissues and organs. Although currently available tissues still lack some crucial functionalities, including vascular networks, innervation, and lymphatic system, microfabrication strategies are being proposed to overcome these issues. Moreover, the microfabrication techniques that have progressed to the preclinical stage are also discussed.

CONCLUSIONS

This article aims to highlight the advantages and drawbacks of each technique and areas of further research for a more comprehensive and evolving understanding of microfabrication techniques in terms of tissue engineering and regenerative medicine applications.

Novel combination of bioactive agents in bilayered dermal patches provides superior wound healing

In present study, multifunctional bilayered dermal patches with antibacterial, antioxidant and anti-inflammatory properties were developed using solvent casting or electrospinning methods and compared for performance. Top layer was made up of polycaprolactone (PCL) and chitosan (CS) while bottom layer was made of polyvinyl alcohol (PVA) with curcumin nanoparticles and soluble eggshell membrane protein (SESM) as the wound healing agents. Curcumin nanoparticles showed reduction in the production of reactive oxygen species (ROS) and inflammatory cytokines and markers in mice T cells or human macrophages, confirming their antioxidant and anti-inflammatory properties while SESM improved migration of human adult dermal fibroblasts, suggesting its contribution to wound healing. The dermal patches were hemocompatible and antibacterial and also provided adequate absorption of wound exudates, support and components required for recruitment of cells and deposition of extracellular matrix to enable superior wound healing than its commercial counterpart in a full thickness excision wound model in rats.

Experimental study of carbon dioxide absorption by Fe2O3@glutamine/NMP nanofluid

In this study, for the first time, the nanoparticle (NP) of Fe₂O₃@glutamine (C₅H₁₀N₂O₃) was synthesized to improve the Fe₂O₃ properties in absorbing carbon dioxide (CO₂) using the base fluid of hydrous N-methyl-2-pyrrolidone (NMP) solution (50 wt%), as a physically powerful CO₂ absorbent. To do this, several nano-NMP solutions, in different weight percentages of NPs, were first prepared. Then, in a batch setup, the nano-NMP solutions were directly exposed to CO₂ gaseous (at the pressures of 20, 30, and 40 bar) to clarify the effects of the mass percentage of NPs and initial pressure on CO₂ absorption. Results clearly illustrated that Fe₂O₃ nanofluid was not stable more than 0.025 wt%. However, Fe₂O₃@glutamine nanofluid was stable approximately two times more than Fe₂O₃ nanofluid due to the presence of glutamine as a hydrophilic agent in the structure of Fe₂O₃@glutamine. Moreover, in comparison to the base fluid (NMP solution), although Fe₂O₃ increased CO₂ absorption up to 9.14%, Fe₂O₃@glutamine NPs caused the CO₂ absorption to increase up to 19.41%, which can be determined as the chemical reactions of two amino groups in the glutamine structure with CO₂ and also higher stability of Fe₂O₃@glutamine NPs compared to bare Fe₂O₃ NPs. To achieve accurate results, all the mentioned experiments were repeated 5 times. The performance of Fe₂O₃ and Fe₂O₃@glutamine NPs after the fifth trial reduced by less than 3.5%, which reveals that the synthesized NPs had almost stable efficiency throughout their applications.

Living Lactobacillus-ZnO nanoparticles hybrids as antimicrobial and antibiofilm coatings for wound dressing application

Probiotic bacteria are able to produce antimicrobial substances as well as to synthesize green metal nanoparticles (NPs). New antimicrobial and antibiofilm coatings (LAB-ZnO NPs), composed of Lactobacillus strains and green ZnO NPs, were employed for the modification of gum Arabic-polyvinyl alcohol-polycaprolactone nanofibers matrix (GA-PVA-PCL) against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans. The physicochemical properties of ZnO NPs biologically synthesized by L. plantarum and L. acidophilus, LAB-ZnO NPs hybrids and LAB-ZnO NPs@GA-PVA-PCL were studied using FE-SEM, EDX, EM, FTIR, XRD and ICP-OES. The morphology of LAB-ZnO NPs hybrids was spherical in range of 4.56-91.61 nm with an average diameter about 34 nm. The electrospun GA-PVA-PCL had regular, continuous and without beads morphology in the scale of nanometer and micrometer with an average diameter of 565 nm. Interestingly, the LAB not only acted as a biosynthesizer in the green synthesis of ZnO NPs but also synergistically enhanced the antimicrobial and antibiofilm efficacy of LAB-ZnO NPs@GA-PVA-PCL. Moreover, the low cytotoxicity of ZnO NPs and ZnO NPs@GA-PVA-PCL on the mouse embryonic fibroblasts cell line led to make them biocompatible. These results suggest that LAB-ZnO NPs@GA-PVA-PCL has potential as a safe promising antimicrobial and antibiofilm dressing in wound healing against pathogens.

Multifunctional Nanofibrous Dressing with Antimicrobial and Anti-Inflammatory Properties Prepared by Needle-Free Electrospinning

An active wound dressing should address the main goals in wound treatment, which are improved wound healing and reduced infection rates. We developed novel multifunctional nanofibrous wound dressings with three active ingredients: chloramphenicol (CAM), beta-glucan (βG) and chitosan (CHI), of which βG and CHI are active nanofiber-forming biopolymers isolated from the cell walls of Saccharomyces cerevisiae and from shrimp shells, respectively. To evaluate the effect of each active ingredient on the nanofibers' morphological features and bioactivity, nanofibers with both βG and CHI, only βG, only CHI and only copolymers, polyethylene oxide (PEO) and hydroxypropylmethylcellulose (HPMC) were fabricated. All four nanofiber formulations were also prepared with 1% CAM. The needle-free NanospiderTM technique allowed for the successful production of defect-free nanofibers containing all three active ingredients. The CAM-containing nanofibers had a burst CAM-release and a high absorption capacity. Nanofibers with all active ingredients (βG, CHI and CAM) showed a concentration-dependent anti-inflammatory activity, while maintaining the antimicrobial activity of CAM. The promising anti-inflammatory properties, together with the high absorption capacity and antimicrobial effect, make these multifunctional nanofibers promising as dressings in local treatment of infected and exuding wounds, such as burn wounds.

Antimicrobial core-shell electrospun nanofibers containing Ajwain essential oil for accelerating infected wound healing

Treatment of skin injuries is still facing major challenges, such as chronicity and infections, particularly those caused by multi-drug resistance pathogens. An effective treatment of such wounds should accelerate the wound healing process while preventing bacterial contamination. Here, a novel core-shell nanofiber mat was fabricated comprising gelatin/polyvinyl alcohol (as a core) and aloe vera/arabinose/polyvinylpyrrolidone (as a shell) for accelerating the healing process of bacteria-infected wounds. Trachyspermum Ammi (Ajwain) essential oil (EO), as a potent and natural antimicrobial agent against microorganisms, was incorporated into the core of nanofiber mats using coaxial electrospinning. The microscopy images demonstrated the successful fabrication of the core-shell structure with a uniform fiber size of 564 ± 106.35 nm. Moreover, Ajwain EO-loaded nanofiber mat (core-shell/EO) provided excellent antimicrobial activity and antioxidant ability. The in vitro and ex vivo release of Ajwain EO from the fabricated nanofiber mat corroborated a prolonged release profile. Furthermore, in vivo antibacterial activity, wound closure, and histomorphological examinations showed the high efficacy of the core-shell/EO mat in the treatment of Staphylococcus aureus-infected full-thickness rat wounds compared to standard control treatment with a gauze. Overall, these results represent the core-shell/EO mat's potential as a newly developed wound dressing for bacteria-infected full-thickness skin injuries.

Nanotechnology Development for Formulating Essential Oils in Wound Dressing Materials to Promote the Wound-Healing Process: A Review

Wound healing refers to the replacement of damaged tissue through strongly coordinated cellular events. The patient’s condition and different types of wounds complicate the already intricate healing process. Conventional wound dressing materials seem to be insufficient to facilitate and support this mechanism. Nanotechnology could provide the physicochemical properties and specific biological responses needed to promote the healing process. For nanoparticulate dressing design, growing interest has focused on natural biopolymers due to their biocompatibility and good adaptability to technological needs. Polysaccharides are the most common natural biopolymers used for wound-healing materials. In particular, alginate and chitosan polymers exhibit intrinsic antibacterial and anti-inflammatory effects, useful for guaranteeing efficient treatment. Recent studies highlight that several natural plant-derived molecules can influence healing stages. In particular, essential oils show excellent antibacterial, antifungal, antioxidant, and anti-inflammatory properties that can be amplified by combining them with nanotechnological strategies. This review summarizes recent studies concerning essential oils as active secondary compounds in polysaccharide-based wound dressings.