Chemical analysis and aqueous solution properties of charged amphiphilic block copolymers PBA-b-PAA synthesized by MADIX®

Unimer Exchange Is not Necessary for Morphological Transitions in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has established itself as a powerful and straightforward method to produce polymeric nano-objects of various morphologies in (aqueous) solution. Generally, spheres are formed in the early stages of polymerization that may evolve to higher order morphologies (worms or vesicles), as the solvophobic block grows during polymerization. Hitherto, the mechanisms involved in these morphological transitions during PISA are still not well understood. Combining a systematic study of a representative PISA system with rheological measurements, we demonstrate that-unexpectedly-unimer exchange is not necessary to form higher order morphologies during radical RAFT-mediated PISA. Instead, in the investigated aqueous PISA, the monomer present in the polymerization medium is responsible for the morphological transitions, even though it slows down unimer exchange.

ω-Unsaturated methacrylate macromonomers as reactive polymeric stabilizers in mini-emulsion polymerization

Polymer latexes of poly(benzyl methacrylate) P(BzMA) were synthesized by mini-emulsion polymerization, using hexadecane as the hydrophobe and ω-unsaturated methacrylate-based macromonomers as a reactive stabilizer. The amphiphilic macromonomers were synthesized by...

Mechanistic insights into the formation of polyion complex aggregates from cationic thermoresponsive diblock copolymers

HYPOTHESIS

The formation of polyion complexes (PICs) comprising thermoresponsive polymers is intended to result in the formation of aggregates that undergo significant structural changes with temperature. Moreover the observed modifications might be critically affected by polymer structure and PICs composition.

EXPERIMENTS

Different block copolymers based on cationic poly(3-acrylamidopropyltrimethylammonium chloride) and thermoresponsive poly(N-isopropylacrylamide) were synthesized by aqueous RAFT/MADIX polymerization at room temperature. Addition of poly(acrylic acid) in a controlled fashion led to the formation of PICs aggregates. The structural changes induced by temperature were characterized by differential scanning calorimetry, Nuclear Magnetic Resonance spectroscopy and scattering methods.

FINDINGS

Thermoresponsive PICs undergo significant structural changes when increasing temperature above the cloud point of the thermoresponsive block. The reversibility of these phenomena depends strongly on the structural parameters of the block copolymers and on PICs composition.

Effect of Hydrophilic Monomer Distribution on Self-Assembly of a pH-Responsive Copolymer: Spheres, Worms and Vesicles from a Single Copolymer Composition

A series of copolymers containing 50 mol % acrylic acid (AA) and 50 mol % butyl acrylate (BA) but with differing composition profiles ranging from an AA-BA diblock copolymer to a linear gradient poly(AA-grad-BA) copolymer were synthesized and their pH-responsive self-assembly behavior was investigated. While assemblies of the AA-BA diblock copolymer were kinetically frozen, the gradient-like compositions underwent reversible changes in size and morphology in response to changes in pH. In particular, a diblock copolymer consisting of two random copolymer segments of equal length (16 mol % and 84 mol % AA content, respectively) formed spherical micelles at pH >5, a mix of spherical and wormlike micelles at pH 5 and vesicles at pH 4. These assemblies were characterized by dynamic light scattering, cryo-transmission electron microscopy and small angle neutron scattering.

High shear vortex fluidic morphologically controlled polysulfone formed under anhydrous conditions

Polysulfone (PSF) was prepared under anhydrous conditions in DMSO, under high shear in a vortex fluidic device (VFD) operating under confined mode thereby avoiding the use of chlorinated solvents, unlike in conventional batch processing.

Effect of the microstructure of n-butyl acrylate/N-isopropylacrylamide copolymers on their thermo-responsiveness, self-organization and gel properties in water

HYPOTHESIS

Polymer composition, microstructure, molar mass, architecture… critically affect the properties of thermoresponsive polymers in aqueous media.

EXPERIMENTS

The behaviour of n-isopropylacrylamide and n-butyl acrylate-based copolymers of variable composition and structure (statistical, diblock or triblock) was studied in solution at different temperatures and concentrations with turbidimetry measurements, differential scanning calorimetry, electronic microscopy, rheology and scattering experiments.

FINDINGS

This study illustrates how it is possible through chemical engineering of the microstructure of amphiphilic thermoresponsive polymers to modulate significantly the self-assembly, morphological and mechanical properties of these materials in aqueous media. Statistical structures induced a strong decrease of cloud point temperature compared to block structures with similar composition. Moreover, block structures lead below the transition temperature to the formation of colloidal structures. Above the transition temperature, the formation of colloidal aggregates is observed at low concentrations, and at higher concentrations the formation of gels. Neutron scattering and light scattering measurements show that for a given composition diblock structures lead to smaller colloids and mesoglobules than their triblock counterparts. Moreover, diblock structures, compared to triblock analogs, allow the formation of gels that do not demix with time (no synaeresis) but that are softer than triblock gels.

Influence of Core Cross-Linking and Shell Composition of Polymeric Micelles on Immune Response and Their Interaction with Human Monocytes

Block copolymer micelles have received increasing attention in the last decades, in particular for their appealing properties in nanomedicine. However, systematic investigations of the interaction between polymeric micelles and immune cells are still rare. Therefore, broader studies comparing the structural effects remain inevitable for a comprehensive understanding of the immune response and for the design of efficient, nonimmunogenic delivery systems. Here, we present novel block copolymer micelles with the same hydrophobic core, based on a copolymer of BA and VDM, and various hydrophilic shells ranging from common PEG derivatives to morpholine-based materials. The influence of these shells on innate immune responses was studied in detail. In addition, we investigated the impact of micelle stability by varying the cross-linking density in the micellar core. Surprisingly, whereas different shells had only a minor impact on immune response, micelles with reduced cross-linking density considerably enhanced the release of cytokines from isolated human monocytes. Moreover, the uptake of non-cross-linked micelles by monocytes was significantly higher as compared to cross-linked materials. Our study emphasizes the importance of the micellar stability on the interaction with the immune system, which is the key for any stealth properties in vivo. Polymers based on morpholines result in a similar low response as the PEG derivative and may represent an interesting alternative to the common PEGylation.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Toward Achieving Highly Ordered Fluorinated Surfaces of Spin-Coated Polymer Thin Films by Optimizing the Air/Liquid Interfacial Structure of the Casting Solutions

Thin polymer films with well-assembled fluorinated groups on their surfaces are not easily achieved via spin-coating film-fabrication methods because the solution solidifies very rapidly during spin-coating, which hinders the fluorinated moieties from segregating and organizing on the film surface. In this contribution, we have proposed a comprehensive strategy toward achieving well-ordered fluorinated thin films surfaces by optimizing the molecular organization at air/liquid interface of the film-formation solutions. To validate such a route, poly(methyl methacrylate) (PMMA) end-capped with several 2-perfluorooctylethyl methacrylate (FMA) units was employed as the model polymer for investigations. The air/solution interfacial structures were optimized by systematically changing the polymer chain structures and properties of the casting solvents. It was found that the polymers that form loosely associated aggregates (e.g., FMA₁- ec-PMMA₆₅- ec-FMA₁) and a solvent with better solubility to FMA while having not too low surface tension (i.e., toluene) can combine to produce solutions with well-assembled FMA at the interfaces. By spin-coating the solutions with well-organized interfaces, an ultrathin film with perfluorinated groups that were highly oriented toward the film surface was readily achieved, exhibiting surface energies as low as 7.2 mJ/m², which is among the lowest reported so far for the spin-coated thin films, and a very high F/C ratio (i.e., 0.98).

Hydrophobic Monomer Type and Hydrophilic Monomer Ionization Modulate the Lyotropic Phase Stability of Diblock Co-oligomer Amphiphiles

The phase behavior and self-assembly structures of a series of amphiphilic diblock co-oligomers comprising an ionizable hydrophilic block (5 to 10 units of acrylic acid) and a hydrophobic block (5 to 20 units of n-butyl acrylate, t-butyl acrylate, or ethyl acrylate), synthesized by RAFT polymerization, have been examined by polarizing optical microscopy and small-angle X-ray scattering (SAXS). Self-assembled structure and lyotropic phase stability in these systems is highly responsive to the degree of ionization of the acrylic acid hydrophilic block (i.e., pH), concentration, and nature of the hydrophobic block. Increasing headgroup ionization switched the amphiphiles from behaving like soluble to insoluble surfactants. Liquid isotropic (micellar), hexagonal, lamellar, and discrete cubic phases were found under different solution conditions. The surfactant packing parameter was adapted to understand the self-assembly structures in these diblock co-oligomers. The hydrophobic chain structure and length were shown to strongly affect the relative stabilities of these phases, allowing the self-assembled structure to be varied at will.

Precise Control over the Rheological Behavior of Associating Stimuli-Responsive Block Copolymer Gels

"Smart" materials have considerably evolved over the last few years for specific applications. They rely on intelligent macromolecules or (supra-)molecular motifs to adapt their structure and properties in response to external triggers. Here, a supramolecular stimuli-responsive polymer gel is constructed from heterotelechelic double hydrophilic block copolymers that incorporate thermo-responsive sequences. These macromolecular building units are synthesized via a three-step controlled radical copolymerization and then hierarchically assembled to yield coordination micellar hydrogels. The dynamic mechanical properties of this particular class of materials are studied in shear flow and finely tuned via temperature changes. Notably, rheological experiments show that structurally reinforcing the micellar network nodes leads to precise tuning of the viscoelastic response and yield behavior of the material. Hence, they constitute promising candidates for specific applications, such as mechano-sensors.

Tuning the aggregation behavior of pH-responsive micelles by copolymerization

A series of pH sensitive amphiphilic diblock copolymers where the associating block is a copolymer have been synthesized. Their pH sensitive behavior has been explored by a range of analytical techniques and the nanostructures formed are highly sensitive to both pH and the associating block composition.

Chain length dependence of non-surface activity and micellization behavior of cationic amphiphilic diblock copolymers

The cationic and anionic amphiphilic diblock copolymers with a critical chain length and block ratio do not adsorb at the air/water interface but form micelles in solution, which is a phenomenon called "non-surface activity". This is primarily due to the high charge density of the block copolymer, which creates a strong image charge effect at the air/water interface preventing adsorption. Very stable micelle formation in bulk solution could also play an important role in the non-surface activity. To further confirm these unique properties, we studied the adsorption and micellization behavior of cationic amphiphilic diblock copolymers of poly(n-butyl acrylate)-b-poly(3-(methacryloyloxy)ethyl)trimethylammonium chloride) (PBA-b-PDMC) with different molecular weights of hydrophobic blocks but with the same ionic block length. These block copolymers were successfully prepared via consecutive reversible addition-fragmentation chain transfer (RAFT) polymerization. The block copolymer with the shortest hydrophobic block length was surface-active; the solution showed surface tension reduction and foam formation. However, above the critical block ratio, the surface tension of the solution did not decrease with increasing polymer concentration, and there was no foam formation, indicating lack of surface activity. After addition of 0.1 M NaCl, stable foam formation and slight reduction of surface tension were observed, which is reminiscent of the electrostatic nature of the non-surface activity. Fluorescence and dynamic and static light scattering measurements showed that the copolymer with the shortest hydrophobic block did not form micelles, while the block copolymers formed spherical micelles having radii of 25-30 nm. These observations indicate that micelle formation is also important for non-surface activity. Upon addition of NaCl, cmc did not decrease but rather increased as observed for non-surface-active block copolymers previously studied. The micelles formed were very stable, and their size decreased by only ∼5 nm after addition of 0.1 M NaCl.

Thirty-femtogram detection of iron in mammalian cells

Inorganic nanomaterials and particles with enhanced optical, mechanical, or magnetic attributes are currently being developed for a wide range of applications. Safety issues have developed however concerning their potential cyto- and genotoxicity. For in vivo and in vitro experimentations, recent developments have heightened the need for simple and facile methods to measure the amount of nanoparticles taken up by cells or tissues. In this work, a rapid and highly sensitive method for quantifying the uptake of iron oxide nanoparticles in mammalian cells is reported. The approach exploits the digestion of incubated cells with concentrated hydrochloric acid reactant and a colorimetric-based UV-visible absorption technique. The technique allows the detection of iron in cells over 4 decades in masses from 0.03 to 300 picograms per cell. Applied on particles of different surface chemistry and sizes, the protocol demonstrates that the coating is the key parameter in the nanoparticle/cell interactions. The data are corroborated by scanning and transmission electron microscopy, and the results stress the importance of resiliently adsorbed nanoparticles at the plasma membrane.

Controlling electrostatic co-assembly using ion-containing copolymers: from surfactants to nanoparticles

In this review, we address the issue of the electrostatic complexation between charged-neutral diblock copolymers and oppositely charged nanocolloids. We show that nanocolloids such as surfactant micelles and iron oxide magnetic nanoparticles share similar properties when mixed with charged-neutral diblocks. Above a critical charge ratio, core-shell hierarchical structures form spontaneously under direct mixing conditions. The core-shell structures are identified by a combination of small-angle scattering techniques and transmission electron microscopy. The formation of multi-level objects is driven by the electrostatic attraction between opposite charges and by the release of the condensed counterions. Alternative mixing processes inspired from molecular biology are also described. The protocols applied here consist in screening the electrostatic interactions of the mixed dispersions, and then removing the salt progressively as an example by dialysis. With these techniques, the oppositely charged species are intimately mixed before they can interact, and their association is monitored by the desalting kinetics. As a result, sphere- and wire-like aggregates with remarkable superparamagnetic and stability properties are obtained. These findings are discussed in the light of a new paradigm which deals with the possibility to use inorganic nanoparticles as building blocks for the design and fabrication of supracolloidal assemblies with enhanced functionalities.

Non-surface activity and micellization behavior of cationic amphiphilic block copolymer synthesized by reversible addition-fragmentation chain transfer process

Cationic amphiphilic diblock copolymers of poly(n-butylacrylate)-b-poly(3-(methacryloylamino)propyl)trimethylammonium chloride) (PBA-b-PMAPTAC) with various hydrophobic and hydrophilic chain lengths were synthesized by a reversible addition-fragmentation chain transfer (RAFT) process. Their molecular characteristics such as surface activity/nonactivity were investigated by surface tension measurements and foam formation observation. Their micelle formation behavior and micelle structure were investigated by fluorescence probe technique, static and dynamic light scattering (SLS and DLS), etc., as a function of hydrophilic and hydrophobic chain lengths. The block copolymers were found to be non-surface active because the surface tension of the aqueous solutions did not change with increasing polymer concentration. Critical micelle concentration (cmc) of the polymers could be determined by fluorescence and SLS measurements, which means that these polymers form micelles in bulk solution, although they were non-surface active. Above the cmc, the large blue shift of the emission maximum of N-phenyl-1-naphthylamine (NPN) probe and the low micropolarity value of the pyrene probe in polymer solution indicate the core of the micelle is nonpolar in nature. Also, the high value of the relative intensity of the NPN probe and the fluorescence anisotropy of the 1,6-diphenyl-1,3,5-hexatriene (DPH) probe indicated that the core of the micelle is highly viscous in nature. DLS was used to measure the average hydrodynamic radii and size distribution of the copolymer micelles. The copolymer with the longest PBA block had the poorest water solubility and consequently formed micelles with larger size while having a lower cmc. The "non-surface activity" was confirmed for cationic amphiphilic diblock copolymers in addition to anionic ones studied previously, indicating the universality of non-surface activity nature.

Interactions between magnetic nanowires and living cells: uptake, toxicity, and degradation

We report on the uptake, toxicity, and degradation of magnetic nanowires by NIH/3T3 mouse fibroblasts. Magnetic nanowires of diameters 200 nm and lengths between 1 and 40 μm are fabricated by controlled assembly of iron oxide (γ-Fe(2)O(3)) nanoparticles. Using optical and electron microscopy, we show that after 24 h incubation the wires are internalized by the cells and located either in membrane-bound compartments or dispersed in the cytosol. Using fluorescence microscopy, the membrane-bound compartments were identified as late endosomal/lysosomal endosomes labeled with lysosomal associated membrane protein (Lamp1). Toxicity assays evaluating the mitochondrial activity, cell proliferation, and production of reactive oxygen species show that the wires do not display acute short-term (<100 h) toxicity toward the cells. Interestingly, the cells are able to degrade the wires and to transform them into smaller aggregates, even in short time periods (days). This degradation is likely to occur as a consequence of the internal structure of the wires, which is that of a noncovalently bound aggregate. We anticipate that this degradation should prevent long-term asbestos-like toxicity effects related to high aspect ratio morphologies and that these wires represent a promising class of nanomaterials for cell manipulation and microrheology.

Magnetic nanowires generated via the waterborne desalting transition pathway

We report a simple and versatile waterborne synthesis of magnetic nanowires following the innovative concept of electrostatic "desalting transition". Highly persistent superparamagnetic nanowires are generated from the controlled assembly of oppositely charged nanoparticles and commercially available polyelectrolytes. The wires have diameters around 200 nm and lengths between 1 μm and 0.5 mm, with either positive or negative charges on their surface. Beyond, we show that this soft-chemistry assembly approach is a general phenomenon independent of the feature of the macromolecular building blocks, opening significant perspectives for the design of multifunctional materials.

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.

Smart organic-inorganic nanohybrids based on amphiphilic block copolymer micelles and functional silsesquioxane nanoparticles

Smart organic-inorganic nanohybrids are formed in aqueous solution by the interaction of amphiphilic block copolymer micelles of poly(n-butyl acrylate)-block-poly(acrylic acid) (PnBA(x)-b-PAA(y) with x = 90, 100 and y = 100, 150, 300) and diglycidylaminopropyl-functional silsesquioxane nanoparticles. We investigate the structure of the complex nanohybrids in dependence on pH and salinity. The complexation preserves the original size of the micelles according to dynamic light scattering (DLS) measurements. Cryogenic transmission electron microscopy (cryo-TEM) and Fourier-transform infrared spectroscopy (FT-IR) measurements unveil the formation of organic-inorganic nanohybrids. Furthermore, cryo-TEM micrographs provide evidence for the formation of a core-shell-corona structure of the nanohybrid system. Dialysis experiments with fluorescently labeled silsesquioxane nanoparticles clearly demonstrate the interaction between the micellar system and the silsesquioxane nanoparticles.