Removal of p-nitrophenol by a water-compatible hypercrosslinked resin functionalized with formaldehyde carbonyl groups and XAD-4 in aqueous solution: A comparative study

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Production of demineralised high quality hierarchical activated carbon from lignite and determination of adsorption performance using methylene blue and p-nitrophenol: The role of surface functionality, accessible pore size and surface area

In the adsorption process, the surface area, pore and particle size distribution and the chemical structure of the solid and the type of adsorbent are of vital importance. Activated carbon (AC) is a very good adsorbent material and its cost is highly dependent on the starting material and production method. The pore size and functional structure of the surface depend on the amount of activation chemical used. Hierarchical ACs were produced from lignite by loading two different amounts of KOH. The impregnation ratio (KOH/lignite) was chosen as 1/1 and 3/1 and the produced ACs were labelled as AC1 and AC3. The surface areas of AC1 and AC3 were determined as 1321.3 and 2421.3 m2/g, and the total pore volumes were 1.079 and 1.425 cm3/g. Methylene blue (MB) and p-nitrophenol (p-NP) were used to determine the adsorption performance of the produced ACs. The adsorption data were evaluated in terms of the Langmuir and Freundlich models. The amounts of MB and p-NP adsorbed on the surface were calculated in mg/g, total and accessible surface area in mg/m2. It was determined that the MB and p-NP adsorbed to the AC1 sample were higher than the AC3 sample per m2 of population. Molecular orientation is possible depending on the solid surface functionality and chemical structure of the molecule to be adsorbed. It was concluded that in addition to the large surface area, the pore width that can be entered and the functional structure of the surface are very significant factors in the adsorption processes.

Adsorption and Catalytic Activity of Gold Nanoparticles in Mesoporous Silica: Effect of Pore Size and Dispersion Salinity

The assembled state of nanoparticles (NPs) within porous matrices plays a governing role in directing their biological, electronic, and catalytic properties. However, the effects of the spatial confinement and environmental factors, such as salinity, on the NP assemblies within the pores are poorly understood. In this study, we use adsorption isotherms, spectrophotometry, and small-angle neutron scattering to develop a better understanding of the effect of spatial confinement on the assembled state and catalytic performance of gold (Au) NPs in propylamine-functionalized SBA-15 and MCM-41 mesoporous silica materials (mSiO2). We carry out a detailed investigation of the effect of pore diameter and ionic strength on the packing and spatial distribution of AuNPs within mSiO2 to get a comprehensive insight into the structure, functioning, and activity of these NPs. We demonstrate the ability of the adsorbed AuNPs to withstand aggregation under high salinity conditions. We attribute the observed preservation of the adsorbed state of AuNPs to the strong electrostatic attraction between oppositely charged pore walls and AuNPs. The preservation of the structure allows the AuNPs to retain their catalytic activity for a model reaction in high salinity aqueous solution, here, the reduction of p-nitrophenol to p-aminophenol, which otherwise is significantly diminished due to bulk aggregation of the AuNPs. This fundamental study demonstrates the critical role of confinement and dispersion salinity on the adsorption and catalytic performance of NPs.

Removal of 4-Nitrophenol from Aqueous Solution by Using Polyphenylsulfone-Based Blend Membranes: Characterization and Performance

Among many contaminants in wastewater, organic phenol compounds presented a major concern to endanger the water resources safety. In the present study, blend nanofiltration (NF) membranes comprising polyphenylsulfone (PPSU) and polyethersulfone (PES) were prepared via the non-induced phase separation and their performance was examined against 4-Nitrophenol (4-NP). The PES ratio in the dope solution was varied from 6 to 9 wt.% to probe the impact of PES on the retention and permeation characteristics of the final membranes. A series of experimental tools were employed to estimate the characteristics of the membranes, including surface and cross-section, hydrophilicity, pore size and pore size distribution. Performance evaluation of the NF membranes was conducted considering two operational variables; pH and initial feed solution. About 99% removal of 4-NP along with 6.2 L/m².h.bar was achieved at the optimum operating conditions as revealed by optimization and mathematical modelling.

Preparative Separation of Flavonoids from Goji Berries by Mixed-Mode Macroporous Adsorption Resins and Effect on Aβ-Expressing and Anti-Aging Genes

Flavonoids are the main constituents of Goji berries and have good biological and pharmacological activities. The mixed-mode macroporous adsorption resins (MARs) for purification of flavonoids from Goji berries through computer-assisted calculation of the molecular size of flavonoids and the precise matching of MAR physical and chemical properties was firstly developed in the present study. Ten varieties of MARs with suitable molecular dimensions and polarities were used for investigating the adsorption/desorption behaviors of the flavonoids. Both AUKJ-1 and BWKX-1 showed higher separation efficiency than other MARs and then were mixed in different ratios to constitute a mixed-mode macroporous adsorption resin to obtain the optimal adsorption phase. Under optimal conditions, total flavonoid content of purified flavonoid (p-FLA) extract increased from 0.97% to 36.88% after one purification. The p-FLA extract from Goji berries significantly improved the expression of six genes with anti-aging effects and played an important role in aging-related Alzheimer's disease by down-regulating Aβ expression.

Preparation of hypercrosslinked amine modification resin and its adsorption properties for nitroaromatics

A nitrosation-reduction method had been applied for the modification of DCE-4 h. It was a kind of non-polar hypercrosslinked resin and synthesized by our group. The functional resin, NR-07, exhibited good adsorption performance for NACs (Nitroaromatics). The adsorption capacity of NR-07 for p-nitrobenzoic acid was almost 1.3 times as much as that of H-103 in 24 h. The adsorption rate of NR-07 calculated by the kinetic function was 1.6 times as much as that of DCE-4h. According to the EA analysis and IR spectrum, the amine and carbonyl group were introduced onto the polymer chains of NR-07. These hydrophilic chemical groups of NR-07 contributed to a higher liquid-film diffusion rate than that of DCE-4h. Besides, the pore volume within 0.46~4.3 nm increased after the modification process, which had a positive effect on the intra-particle diffusion process.

Adsorption of phenolic compounds from water by a novel ethylenediamine rosin-based resin: Interaction models and adsorption mechanisms

This study describes the adsorption performance of a novel ethylenediamine rosin-based resin (EDAR) for several industrially-important phenolic compounds. Its removal of 4-nitrophenol (4-NP) from water was comparable to or better than many commercial resins, although it was less effective with other phenols (i. e., phenol, 2,4-dichlorophenol, 4-chlorophenol, and 4-methylphenol). Experimental conditions for batch adsorption of 4-NP by EDAR are evaluated, the adsorption kinetics is well described by the pseudo-second-order model (R² > 0.99) and isotherm follows the Langmuir isotherm model (R² > 0.99), with the maximum monolayer adsorption capacity of 82 mg g^-1 at pH 6.0 and 293 K. The thermodynamic parameters indicate that the adsorption is spontaneous and endothermic. Also, quantum chemistry calculations indicate involvement of hydrogen-bonding between 4-NP and amino groups of EDAR. 4-NP was efficiently desorbed from the loaded EDAR resin by 0.2 M HCl, and the resin could be recycled with only a small decrease in its initial adsorption capacities. Thus, EDAR is a promising adsorbent for the removal of 4-NP during water treatment.

Enhanced removal of p-nitrophenol from aqueous media by montmorillonite clay modified with a cationic surfactant

Montmorillonite clay (MC) yields after modification of the interlamellar spacing and the chemical character of its surface by treatment with cetyltrimethylammonium bromide (CTAB) a solid product (MCCTA). This has been used as an adsorbent for the removal of p-nitrophenol (PNP) from aqueous solutions. The MCCTA samples were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TG/DTA), FT-IR spectroscopy, zeta potential measurements, X-ray diffraction (XRD), and specific surface area. Investigations were also carried out to assess how the adsorption of PNP was affected by factors such as contact time, initial PNP concentration, adsorbent dosage and temperature. Of the two models tried the Freundlich isotherm gave a better account of the equilibrium data than did the Langmuir one. The kinetics could be successfully replicated by a pseudo-second order model with an activation energy of 55.0 kJ mol^-1, while the thermodynamic parameters indicated an exothermic (Δ_adsH^o = -15.8 kJ mol^-1), non-spontaneous (Δ_adsG^o = + 3.9-5.9 kJ mol^-1) adsorption process. The experimental results showed MCCTA, unlike natural MC, to have a significant adsorption capacity for PNP removal from aqueous media.

Effective adsorption of nitroaromatics at the low concentration by a newly synthesized hypercrosslinked resin

In the present study, a series of hypercrosslinked resins (CH series) was prepared in systematically designed conditions for the adsorption of nitroaromatics from aqueous solution. The newly synthesized CH-10 possesses a Brunauer-Emmett-Teller (BET) surface area up to 1,329.3 m²/g which is larger than that of the widely used hypercrosslinked resin H-103 and it exhibits great advantage over H-103 when subjected to nitrobenzene at low concentrations. The adsorption capacity of CH-10 for nitrobenzene is 1.4 times as much as that of H-103 at the concentration of 100 mg/L. Kinetic study by film diffusion model and intra-particle diffusion model revealed that its distinctive mesoporous structure within pore diameters between 2 and 6 nm played significant role in the mass transfer at low concentrations, and these unique mesopores also resulted in better adsorption capacity, which was confirmed by adsorption thermodynamics study. Moreover, the CH series displayed a good affinity to a wide scope of nitroaromatics and exhibited excellent dynamic adsorption and desorption properties in fixed bed.

Application of pseudo-emulsion-based hollow fiber strip dispersion for the extraction of p-nitrophenol from aqueous solutions

The extraction of p-nitrophenol (PNP) from aqueous solutions through a pseudo-emulsion hollow fiber strip dispersion (PEHFSD) system was conducted in a microporous hydrophobic polypropylene hollow fiber membrane contactor. For the optimization of the process variables, face-centered central composite design (FCCD) has been used. It was observed that initial feed concentration, carrier composition and stripping phase concentration were the three FCCD factors, which influenced the nitrophenol extraction. Using the optimized process conditions for the separation of PNP, experiments were also performed for the separation of other nitrophenols through PEHFSD system. By the FCCD design and analysis, almost 99% extraction of all three nitrophenols was achieved at optimum conditions. A mass transfer model was also developed and aqueous and membrane resistances were evaluated as 196.46 s cm(-1) and 50.14 s cm(-1), respectively.

Enhanced adsorptive removal of p-nitrophenol from water by aluminum metal-organic framework/reduced graphene oxide composite

In this study, the composite of aluminum metal–organic framework MIL-68(Al) and reduced graphene oxide (MA/RG) was synthesized via a one–step solvothermal method, and their performances for p–nitrophenol (PNP) adsorption from aqueous solution were systematically investigated. The introduction of reduced graphene oxide (RG) into MIL-68(Al) (MA) significantly changes the morphologies of the MA and increases the surface area. The MA/RG-15% prepared at RG-to-MA mass ratio of 15% shows a PNP uptake rate 64% and 123% higher than MIL-68(Al) and reduced graphene oxide (RG), respectively. The hydrogen bond and π – π dispersion were considered to be the major driving force for the spontaneous and endothermic adsorption process for PNP removal. The adsorption kinetics, which was controlled by film–diffusion and intra–particle diffusion, was greatly influenced by solution pH, ionic strength, temperature and initial PNP concentration. The adsorption kinetics and isotherms can be well delineated using pseudo–second–order and Langmuir equations, respectively. The presence of phenol or isomeric nitrophenols in the solution had minimal influence on PNP adsorption by reusable MA/RG composite.

Separation of phenolic compounds with modified adsorption resin from aqueous phase products of hydrothermal liquefaction of rice straw

Hydrothermal liquefaction can be used to convert rice straw into an aqueous phase product that contains valuable phenolic compounds. In experiments, commercial adsorption resin XAD-4 was modified by a benzene ring - α,α'-dichloro-p-xylene (DCX) - in order to separate the phenolic compounds from the aqueous phase product; and, the optimal conditions for separation were explored. The results showed that, after modification of the resin, its adsorption capacity improved by 50%, due to increases in surface area, pore volume and micropore volume. The selectivity of the resin increased when the benzene ring was introduced as the ring formed hydrogen bonds with the compounds. The optimal conditions for separation were desorption agent of 40%, 45% and 55% ethanol solution, a flow rate of 2.5-5 mL/min, and a ratio of the sample volume to the column volume was 1:1. The total content of phenolic compounds in aqueous solution increased from 18% to 78% after separation.

Surface immobilization of β-cyclodextrin on hybrid silica and its fast adsorption performance of p-nitrophenol from the aqueous phase

Fast adsorption of p-nitrophenol was achieved through surface immobilization of β-cyclodextrin onto hybrid silica and maintenance of its hydrophobic cavity.

Effects of the steric hindrance of micropores in the hyper-cross-linked polymeric adsorbent on the adsorption of p-nitroaniline in aqueous solution

A hyper-cross-linked polymeric adsorbent with "--CH2--phenol--CH2--" as the cross-linked bridge (denoted GQ-05), and another hyper-cross-linked polymeric adsorbent with "--CH2--p-cresol--CH2--" as the cross-linked bridge (denoted GQ-03) were synthesized to reveal the effect of the steric hindrance of micropores in the hyper-cross-linked polymeric adsorbent on adsorption capacity and adsorption rate of p-nitroaniline (PNA) from aqueous solution. The results of adsorption kinetics indicated the order of the adsorption rate GQ-05>GQ-03. The pseudo-first-order rate equation could describe the entire adsorption process of PNA onto GQ-05 while the equation characterized the adsorption process of GQ-03 in two stages. The order of the adsorption capacity GQ-05>GQ-03 was demonstrated by thermodynamic analysis and dynamic adsorption. The steric hindrance of micropores in the hyper-cross-linked polymeric adsorbent was a crucial factor for the order of the adsorption capacity and adsorption rate.

4-nitrophenol removal from aqueous solutions by emulsion liquid membranes using type I facilitation

Nitrophenols are common organic pollutants that enter the environment during the manufacture and processing of a variety of industrial products. The removal of 4-nitrophenol (4NP) from aqueous solutions by emulsion liquid membranes using the type I facilitated transport mechanism is investigated in this paper. The liquid membrane consisted of kerosene as the organic diluent, sorbitan monooleate as the emulsifying agent and sodium hydroxide as the stripping agent. The most important operational variables governing the emulsion stability and the 4NP removal process--such as the stripper agent and surfactant concentrations, the volume ratios of membrane phase/internal phase and emulsion phase/feed phase and stirring speed - were studied and the optimal conditions of the removal process were experimentally determined. Apparent initial permeabilities of the transport process in the different operational conditions were also obtained. Ninety-eight per cent of4NP was removed in 10 minutes and an apparent initial permeability of 1.2986 min(-1) was obtained in those optimal conditions.

Effects of metal cations on sorption-desorption of p-nitrophenol onto wheat ash

The mutual effects of metal cations (Cu2+, Pb2+, Zn2+, and Cd2+) and p-nitrophenol (NP) on their adsorption desorption behavior onto wheat ash were studied. Results suggested that Cu2+, Pb2+, and Zn2+ diminished the adsorption and increased the desorption of NP remarkably, while Cd2+ had no such effect. In contrast, NP diminished the adsorption of Cu2+, Pb2+, and Zn2+ onto ash, however, this suppression effect depended on the initial concentrations of metal cations. NP had no effect on Cd2+ adsorption on ash. Fourier transform infrared (FT-IR) and X-ray absorption spectroscopic (XAS) studies suggested the following mechanisms responsible for the metal suppression effect on NP adsorption: (1) large hydrated Cu2+, Pb2+, and Zn2+ shells occupied the surface of ash and prevent nonspecific adsorption of NP onto ash surface; (2) Cu2+, Pb2+, and Zn2+ may block the micropores of ash, resulting in decreased adsorption of NP; (3) complexation of Cu2+, Pb2+, and Zn2+ was likely via carboxyl, hydroxylic and phenolic groups of wheat ash and these same groups may also react with NP during adsorption. As a "soft acid", Cd2+ is less efficient in the complexation of oxygen-containing acid groups than Cu2+, Pb2+, and Zn2+. Thus, Cd2+ had no effect on the adsorption of NP on wheat ash.