Influence of the zeta potential on the sorption and toxicity of iron oxide nanoparticles on S. cerevisiae and E. coli

Impact of plasmolysis process on the enrichment of brewer's spent yeast biomass with vitamin D3 by biosorption followed by spray-drying process

Vitamin D3(cholecalciferol)plays a crucial role in various physiological processes. However, vitamin D3 deficiency is a major public health problem affecting millions of people. Therefore, it is important to develop effective strategies that ensure the protection and stability of this important vitamin for food supplementation and fortification. This work aimed to impregnate intact and plasmolyzedSaccharomyces pastorianus brewer's yeast biomass with cholecalciferol using a biosorption process followed by spray drying to characterize the obtained material in terms of morphology, average particle size, zeta potential, moisture, water activity, FT-IR, and the stability of the encapsulated vitamin during the drying and storage process. Plasmolysis proved to be an effective method for improving the biosorption efficiency, retention during spray drying, and stability of vitamin D3. In addition, this process promoted an increase in cell size, which favored the dispersion stability of the system, as evidenced by the zeta potential values. These results contribute to the understanding of a new method for delivering this vitamin that conforms to environmentally conscious practices.

Toxicity of inorganic nanoparticles and commercial sunscreens on marine bacteria

The Balearic Islands, a top tourist destination for sunny beaches, face physical and chemical pressures from human activities, impacting keystone species like the endemic seagrass Posidonia oceanica and its associated microbiome. This study evaluated the effects of ZnO and TiO2 nanoparticles and three commercial sunscreens with varying protection factors (50 or 90) and chemical complexities (1- SPF50_E "eco-friendly"; 2- SPF50 not "eco-friendly"; 3- SPF90 not "eco-friendly") on five heterotrophic bacteria (Pseudomonas azotifigens, Marinobacterium litorale, Thiothrix nivea, Sedimenticola thiotaurini and Cobetia sp) and two autotrophic cyanobacteria (Halothece sp. and Fischerella muscicola) associated to P. oceanica, as well as a natural leaf epiphytic community. Results indicated that TiO2 affected all heterotrophic bacteria, while ZnO was toxic to only two species, while autotrophs were unaffected. Commercial sunscreens impacted three heterotrophs and the natural epiphytic community, while autotrophs were only affected by SPF50. SPF50_E reduced phosphorus uptake, and both SPF50 and SPF90 decreased alkaline phosphatase activity. Reactive oxygen species production was mainly induced by SPF90, followed by SPF50_E and SPF50. Generally, the smallest bacteria were most sensitive to UV-filters (UVFs). This study indicates that UVFs exposure may alter the epiphytic community structure of P. oceanica.

Biocompatibility and potential anticancer activity of gadolinium oxide (Gd2O3) nanoparticles against nasal squamous cell carcinoma

Chemotherapy as a cornerstone of cancer treatment is slowly being edged aside owing to its severe side effects and systemic toxicity. In this case, nanomedicine has emerged as an effective tool to address these drawbacks. Herein, a biocompatible carrier based on bovine serum albumin (BSA) coated gadolinium oxide nanoparticles (Gd2O3@BSA) was fabricated for curcumin (CUR) delivery and its physicochemical features along with its potential anticancer activity against nasal squamous cell carcinoma were also investigated. It was found that the fabricated Gd2O3@BSA containing CUR (Gd2O3@BSA-CUR) had spherical morphology with hydrodynamic size of nearly 26 nm, zeta-potential of -36 mV and high drug (CUR) loading capacity. Drug release profile disclosed that the release of CUR from the prepared Gd2O3@BSA-CUR nanoparticles occurred in a sustained- and pH-dependent manner. Also, in vitro cytotoxicity analysis revealed that the fabricated Gd2O3@BSA nanoparticles possessed excellent biosafety toward HFF2 normal cells, while Gd2O3@BSA-CUR appeared to display the greatest anticancer potential against RPMI 2650 and CNE-1 cancer cell lines. The results also show that the Gd2O3@BSA nanoparticles were compatible with the blood cells with minor hemolytic effect (< 3%). The manufactured NPs were found to be completely safe for biological applications in an in vivo subacute toxicity study. Taken together, these finding substantiate the potential anticancer activity of Gd2O3@BSA-CUR nanoparticles against nasal squamous cell carcinoma, but the results obtained demand further studies to assess their full potential.

A Facile Approach to Producing Liposomal J-Aggregates of Indocyanine Green with Diagnostic and Therapeutic Potential

Liposomal J-Aggregates of Indocyanine Green (L-JA) can serve as a biocompatible and biodegradable nanoparticle for photoacoustic imaging and photothermal therapy. When compared to monomeric IcG, L-JA are characterized by longer circulation, improved photostability, elevated absorption at longer wavelengths, and increased photoacoustic signal generation. However, the documented methods for production of L-JA vary widely. We developed an approach to efficiently form IcG J-aggregates (IcG-JA) directly in liposomes at elevated temperatures. Aggregating within fully formed liposomes ensures particle uniformity and allows for control of J-aggregate size. L-JA have unique properties compared to IcG. L-JA provide significant contrast enhancement in photoacoustic images for up to 24 hours after injection, while IcG and unencapsulated IcG-JA are cleared within an hour. L-JA allow for more accurate photoacoustic-based sO2 estimation and particle tracking compared to IcG. Furthermore, photothermal heating of L-JA with an 852nm laser is demonstrated to be more effective at lower laser powers than conventional 808nm lasers for the first time. The presented technique offers an avenue for formulating a multi-faceted contrast agent for photoacoustic imaging and photothermal therapy that offers significant advantages over other conventional agents.

Important Factors Affecting Induction of Cell Death, Oxidative Stress and DNA Damage by Nano- and Microplastic Particles In Vitro

We have described the influence of selected factors that increase the toxicity of nanoplastics (NPs) and microplastics (MPs) with regard to cell viability, various types of cell death, reactive oxygen species (ROS) induction, and genotoxicity. These factors include plastic particle size (NPs/MPs), zeta potential, exposure time, concentration, functionalization, and the influence of environmental factors and cell type. Studies have unequivocally shown that smaller plastic particles are more cytotoxic, penetrate cells more easily, increase ROS formation, and induce oxidative damage to proteins, lipids, and DNA. The toxic effects also increase with concentration and incubation time. NPs with positive zeta potential are also more toxic than those with a negative zeta potential because the cells are negatively charged, inducing stronger interactions. The deleterious effects of NPs and MPs are increased by functionalization with anionic or carboxyl groups, due to greater interaction with cell membrane components. Cationic NPs/MPs are particularly toxic due to their greater cellular uptake and/or their effects on cells and lysosomal membranes. The effects of polystyrene (PS) vary from one cell type to another, and normal cells are more sensitive to NPs than cancerous ones. The toxicity of NPs/MPs can be enhanced by environmental factors, including UV radiation, as they cause the particles to shrink and change their shape, which is a particularly important consideration when working with environmentally-changed NPs/MPs. In summary, the cytotoxicity, oxidative properties, and genotoxicity of plastic particles depends on their concentration, duration of action, and cell type. Also, NPs/MPs with a smaller diameter and positive zeta potential, and those exposed to UV and functionalized with amino groups, demonstrate higher toxicity than larger, non-functionalized and environmentally-unchanged particles with a negative zeta potential.

Functional groups effect on the toxicity of modified ZIF-90 to Photobacterium phosphoreum

Zeolitic imidazolate framework (ZIF) is of wide interest in biomedical applications due to its extraordinary properties such as high storage capacity, functionality and favorable biocompatibility. However, more comprehensive safety assessments are still essential before ZIF is broadly used in biomedicine. Using the characteristic that aldehyde groups on the surface of ZIF-90 can be modified with other functional groups, a series of ZIF-90s modified with different functional groups (oxime group, carboxyl group, amino group and sulfhydryl group) were synthesized to investigate the effect of functionalization on the toxicity of ZIF-90. ZIF-90 series showed concentration-dependent toxic effects on Photobacterium phosphoreum T3 and the functionalized ZIF-90s are more toxic than pristine ZIF-90, with the ZIF-90 modified with amino group (ZIF-90-NH2) showing the strongest toxicity (IC50 = 23.06 mg/L). Based on the results of the cellular assay and stability exploration, we concluded that corresponding imidazole-ligand release and the property of positively charged are responsible for the elevated toxicity of ZIF-90-NH2. Cell membrane damage, oxidative damage and luminescence damage are the main contributors to the toxic effects of ZIF-90 series. This study explored the effect of surface functionalization on the toxicity of ZIF and proposed mechanistic clues for the safety application of ZIF.

Sublethal effects induced by different plastic nano-sized particles in Daphnia magna at environmentally relevant concentrations

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards.

Enhanced Biogenic Sulfidation of Zero-Valent Iron in Columns: Implications for Promoting Dechlorination in Permeable Reactive Barriers

Biogenic sulfidation of zero-valent iron (ZVI) using sulfate reducing bacteria (SRB) has shown enhanced dechlorination rates comparable to those produced by chemical sulfidation. However, controlling and sustaining biogenic sulfidation to enhance in situ dechlorination are poorly understood. Detailed interactions between SRB and ZVI were examined for 4 months in column experiments under enhanced biogenic sulfidation conditions. SRB proliferation and changes in ZVI surface properties were characterized along the flow paths. The results show that ZVI can stimulate SRB activity by removing excessive free sulfide (S2-), in addition to lowering reduction potential. ZVI also hinders downgradient movement of SRB via electrostatic repulsion, restricting SRB presence near the upgradient interface. Dissolved organic carbon (e.g., >2.2 mM) was essential for intense biogenic sulfidation in ZVI columns. The presence of SRB in the upgradient zone appeared to promote the formation of iron polysulfides. Biogenic FeSx deposition increased the S content on ZVI surfaces ∼3-fold, corresponding to 3-fold and 2-fold improvements in the trichloroethylene degradation rate and electron efficiency in batch tests. Elucidation of SRB and ZVI interactions enhances sustained sulfidation in ZVI permeable reactive barrier.

Low-Fouling and Antibacterial Polymer Brushes via Surface-Initiated Polymerization of a Mixed Zwitterionic and Cationic Monomer

The use of surface-grafted polymer brushes with combined low-fouling and antibacterial functionality is an attractive strategy to fight biofilm formation. This report describes a new styrene derivative combining a quaternary ammonium group with a sulfobetaine group in one monomer. Surface-initiated polymerization of this monomer on titanium and a polyethylene (PE) base material gave bifunctional polymer brush layers. Grafting was achieved via surface-initiated atom transfer radical polymerization from titanium or heat-induced free-radical polymerization from plasma-activated PE. Both techniques gave charged polymer layers with a thickness of over 750 nm, as confirmed by ToF-SIMS-SPM measurements. The chemical composition of the brush polymers was confirmed by XPS and FT-IR analysis. The surface charge, characterized by the ζ potential, was positive at different pH values, and the number of solvent-accessible excess ammonium groups was found to be ∼1016 N+/cm2. This led to strong antibacterial activity against Gram-positive and Gram-negative bacteria that was superior to a structurally related contact-active polymeric quaternary ammonium brush. In addition to this antibacterial activity, good low-fouling properties of the dual-function polymer brushes against Gram-positive and Gram-negative bacteria were found. This dual functionality is most likely due to the combination of antibacterial quaternary ammonium groups with antifouling sulfobetaines. The combination of both groups in one monomer allows the preparation of bifunctional brush polymers with operationally simple polymerization techniques.

Iron Oxide Nanoparticles: Green Synthesis and Their Antimicrobial Activity

The rise of antimicrobial resistance caused by inappropriate use of these agents in various settings has become a global health threat. Nanotechnology offers the potential for the synthesis of nanoparticles (NPs) with antimicrobial activity, such as iron oxide nanoparticles (IONPs). The use of IONPs is a promising way to overcome antimicrobial resistance or pathogenicity because of their ability to interact with several biological molecules and to inhibit microbial growth. In this review, we outline the pivotal findings over the past decade concerning methods for the green synthesis of IONPs using bacteria, fungi, plants, and organic waste. Subsequently, we delve into the primary challenges encountered in green synthesis utilizing diverse organisms and organic materials. Furthermore, we compile the most common methods employed for the characterization of these IONPs. To conclude, we highlight the applications of these IONPs as promising antibacterial, antifungal, antiparasitic, and antiviral agents.

Environmental effects and interaction of nanoparticles on beneficial soil and aquatic microorganisms

A steadily increasing production volume of nanoparticles reflects their numerous industrial and domestic applications. These economic successes come with the potential adverse effects on natural systems that are associated with their presence in the environment. Biological activities and effects of nanoparticles are affected by their entry method together with their specificities like their size, shape, charge, area, and chemical composition. Particles can be classified as safe or dangerous depending on their specific properties. As both aquatic and terrestrial systems suffer from organic and inorganic contamination, nanoparticles remain a sink for these contaminants. Researching the sources, synthesis, fate, and toxicity of nanoparticles has advanced significantly during the last ten years. We summarise nanoparticle pathways throughout the ecosystem and their interactions with beneficial microorganisms in this research. The prevalence of nanoparticles in the ecosystem causes beneficial microorganisms to become hazardous to their cells, which prevents the synthesis of bioactive molecules from undergoing molecular modifications and diminishes the microbe population. Recently, observed concentrations in the field could support predictions of ambient concentrations based on modeling methodologies. The aim is to illustrate the beneficial and negative effects that nanoparticles have on aqueous and terrestrial ecosystems, as well as the methods utilized to reduce their toxicity.

Making the connections: physical and electric interactions in biohybrid photosynthetic systems

Biohybrid photosynthesis systems, which combine biological and non-biological materials, have attracted recent interest in solar-to-chemical energy conversion. However, the solar efficiencies of such systems remain low, despite advances in both artificial photosynthesis and synthetic biology. Here we discuss the potential of conjugated organic materials as photosensitisers for biological hybrid systems compared to traditional inorganic semiconductors. Organic materials offer the ability to tune both photophysical properties and the specific physicochemical interactions between the photosensitiser and biological cells, thus improving stability and charge transfer. We highlight the state-of-the-art and opportunities for new approaches in designing new biohybrid systems. This perspective also summarises the current understanding of the underlying electron transport process and highlights the research areas that need to be pursued to underpin the development of hybrid photosynthesis systems.

Non-electrostatic interactions associated with aggregate formation between polyallylamine and Escherichia coli

Bacterial aggregation by mixing with polymers is applied as pretreatment to identify pathogens in patients with infectious diseases. However, the detailed interaction between polymers and bacteria has yet to be fully understood. Here, we investigate the interaction between polyallylamine and Escherichia coli by isothermal titration calorimetry. Aggregation was observed at pH 10 and the binding was driven by favorable enthalpic gain such as the electrostatic interaction. Neither aggregation nor the apparent heat of binding was observed at pH 4.0, despite the strong positive charge of polyallylamine. These results suggest that intermolecular repulsive forces of the abundant positive charge of polyallylamine cause an increased loss of conformational entropy by binding. Non-electrostatic interaction plays a critical role for aggregation.

Sub-inhibitory concentrations of ampicillin affect microbial Fe(III) oxide reduction

Antibiotics are ubiquitous in the iron-rich environments but their roles in microbial reduction of Fe(III) oxides are still unclear. Using ampicillin and Geobacter soli, this study investigated the underlying mechanism by which antibiotic regulated microbial reduction of Fe(III) oxides. Results showed that sub-minimal inhibitory concentrations (sub-MIC) of ampicillin significantly affected ferrihydrite reduction by G. soli, with a stimulatory effect at 1/64 and 1/32 MIC and an inhibitory effect at 1/8 MIC. Increasing ampicillin concentration resulted in increasing cell length and decreasing bacterial zeta potential that were beneficial for ferrihydrite reduction, and decreasing outer membrane permeability that was unfavorable for ferrihydrite reduction. The respiratory metabolism ability was enhanced by 1/64 and 1/32 MIC ampicillin and reduced by 1/8 MIC ampicillin, which was also responsible for regulation of ferrihydrite reduction by ampicillin. The ferrihydrite reduction showed a positive correlation with the redox activity of extracellular polymeric substances (EPS) which was tied to the cytochrome/polysaccharide ratio and the content of α-helices and β-sheet in EPS. These results suggested that ampicillin regulated microbial Fe(III) oxide reduction through modulating the bacterial morphology, metabolism activity and extracellular electron transfer ability. Our findings provide new insights into the environmental factors regulating biogeochemical cycling of iron.

The characteristics of nano-micron calcite particles/common bacteria complex and its interfacial interaction

Based on the composite pollution of atmospheric microbial aerosol, this paper selects the calcite/bacteria complex as the research object which was prepared by calcite particles and two common strains of bacteria (Escherichia coli, Staphylococcus aureus) in the solution system. The morphology, particle size, surface potential, and surface groups of the complex were explored by modern analysis and testing methods, with an emphasis on the interfacial interaction between calcite and bacteria. The SEM, TEM, and CLSM results showed that the morphology of the complex could be divided into three types: bacteria adhering to the surface or edge of micro-CaCO₃, bacteria aggregating with nano-CaCO₃, and single nano-CaCO₃ wrapping bacteria. The complex's particle size was about 2.07 ~ 192.4 times larger than the original mineral particles, and the nano-CaCO₃/bacteria complex's particle size variation was caused by the fact that nano-CaCO₃ has agglomeration in solution. The surface potential of the micro-CaCO₃/bacteria complex (isoelectric point pH = 3.0) lies between micro-CaCO₃ and bacteria, while the surface potential of the nano-CaCO₃/bacteria complex (isoelectric point pH = 2.0) approaches the nano-CaCO₃. The complex's surface groups were based primarily on the infrared characteristics of calcite particles, accompanied by the infrared characteristics of bacteria, displaying the interfacial interaction from the protein, polysaccharides, and phosphodiester groups of bacteria. The interfacial action of the micro-CaCO₃/bacteria complex is mainly driven by electrostatic attraction and hydrogen bonding force, while the nano-CaCO₃/bacteria complex is guided by surface complexation and hydrogen bonding force. The increase in the β-fold/α-helix ratio of the calcite/S. aureus complex indicated that the secondary structure of bacterial surface proteins was more stable and the hydrogen bond effect was strong than the calcite/E. coli complex. The findings are expected to provide basic data for the mechanism research of atmospheric composite particles closer to the real environment.

Zwitterionic surface modification of polyethylene via atmospheric plasma-induced polymerization of (vinylbenzyl-)sulfobetaine and evaluation of antifouling properties

Zwitterionic polymer brushes were grafted from bulk polyethylene (PE) by air plasma activation of the PE surface followed by radical polymerization of the zwitterionic styrene derivative (vinylbenzyl)sulfobetaine (VBSB). Successful formation of dense poly-(VBSB)-brush layers was confirmed by goniometry, IR spectroscopy, XPS and ToF-SIMS analysis. The resulting zwitterionic layers are about 50-100 nm thick and cause extremely low contact angles of 10° (water) on the material. Correspondingly we determined a high density of > 1.0 × 10¹⁶ solvent accessible zwitterions/cm² (corresponding to 2,0 *10^-8 mol/cm²) by a UV-based ion-exchange assay with crystal violet. The elemental composition as determined by XPS and characteristic absorption bands in the IR spectra confirmed the presence of zwitterionic sulfobetaine polymer brushes. The antifouling properties of the resulting materials were evaluated in a bacterial adhesion test against gram-positive bacteria (S. aureus). We observed significantly reduced cellular adhesion of the zwitterionic material compared to pristine PE. These microbiological tests were complemented by tests in natural seawater. During a test period of 21 days, confocal microscopy revealed excellent antifouling properties and confirmed the operating antifouling mechanism. The procedure reported herein allows the efficient surface modification of bulk PE with zwitterionic sulfobetaine polymer brushes via a scalable approach. The resulting modified PE retains important properties of the bulk material and has excellent and durable antifouling properties.

Antimicrobial Natural Hydrogels in Biomedicine: Properties, Applications, and Challenges-A Concise Review

Natural hydrogels are widely used as biomedical materials in many areas, including drug delivery, tissue scaffolds, and particularly wound dressings, where they can act as an antimicrobial factor lowering the risk of microbial infections, which are serious health problems, especially with respect to wound healing. In this review article, a number of promising strategies in the development of hydrogels with biocidal properties, particularly those originating from natural polymers, are briefly summarized and concisely discussed. Common strategies to design and fabricate hydrogels with intrinsic or stimuli-triggered antibacterial activity are exemplified, and the mechanisms lying behind these properties are also discussed. Finally, practical antibacterial applications are also considered while discussing the current challenges and perspectives.

A whole cell fluorescence quenching-based approach for the investigation of polyethyleneimine functionalized silver nanoparticles interaction with Candida albicans

The antimicrobial activity of metal nanoparticles can be considered a two-step process. In the first step, nanoparticles interact with the cell surface; the second step involves the implementation of the microbicidal processes. Silver nanoparticles have been widely explored for their antimicrobial activity against many pathogens. The interaction dynamics of functionalized silver nanoparticles at the biological interface must be better understood to develop surface-tuned biocompatible nanomaterial-containing formulations with selective antimicrobial activity. Herein, this study used the intrinsic fluorescence of whole C. albicans cells as a molecular probe to understand the cell surface interaction dynamics of polyethyleneimine-functionalized silver nanoparticles and antifungal mechanism of the same. The results demonstrated that synthesized PEI-f-Ag-NPs were ~ 5.6 ± 1.2 nm in size and exhibited a crystalline structure. Furthermore, the recorded zeta potential (+18.2 mV) was associated with the stability of NPS and shown a strong electrostatic interaction tendency between the negatively charged cell surface. Thus, rapid killing kinetics was observed, with a remarkably low MIC value of 5 μg/mL. PEI-f-Ag-NPs quenched the intrinsic fluorescence of C. albicans cells with increasing incubation time and concentration and have shown saturation effect within 120 min. The calculated binding constant (Kb = 1 × 10⁵ M^-1, n = 1.01) indicated strong binding tendency of PEI-f-Ag-NPs with C. albicans surface. It should also be noted that the silver nanoparticles interacted more selectively with the tyrosine-rich proteins in the fungal cell. However, calcofluor white fluorescence quenching showed non-specific binding on the cell surface. Thus, the antifungal mechanisms of PEI-f-Ag-NPs were observed as reactive oxygen species (ROS) overproduction and cell wall pit formation. This study demonstrated the utility of fluorescence spectroscopy for qualitative analysis of polyethyleneimine-functionalized silver nanoparticle interaction/binding with C. albicans cell surface biomolecules. Although, a quantitative approach is needed to better understand the interaction dynamics in order to formulate selective surface tuned nanoparticle for selective antifungal activity.

Hydrophobic soot nanoparticles as a non-cytotoxic motility activator of human spermatozoa

Sperm cryopreservation is vital in combating the human infertility, but regrettably, the toxicity of cryoprotectants and the occurrence of intracellular icing, osmotic shocks or shrinkage of the cells below a given threshold volume greatly affects the success rate of this technique. Using the virtue of nanotechnologies and depositing water-repellent soot nanoparticles on the inner walls of cryovials may outline new directions in the development of cryobiology, but doubts related to the soot's venomosity question its practical implementability. The scientific content of this article eliminates the existing apprehensions by analyzing the cytotoxicity of three types of rapeseed oil soot, differing in morphology, surface chemistry and zeta potential, towards human spermatozoa. Upon intermittent evaluations of the sperm motility within 270 min of incubation in vials comprising carbon nanoparticles, we reveal that this soot category is non-cytotoxic or at worst, faintly toxic to the gametes provided by twenty individuals. Enhanced progressive sperm motility is observed at ∼50-60% of patients following the soot treatments, which is attributed to electrostatic repulsions and biochemical alterations in the seminal plasma. These fascinating results open new horizons for incorporation of the rapeseed oil soot as a tool for functional preparation and activation of human spermatozoa preceding in vitro fertilization.

Predicting the Physicochemical Properties and Biological Activities of Monolayer-Protected Gold Nanoparticles Using Simulation-Derived Descriptors

Gold nanoparticles are versatile materials for biological applications because their properties can be modulated by assembling ligands on their surface to form monolayers. However, the physicochemical properties and behaviors of monolayer-protected nanoparticles in biological environments are difficult to anticipate because they emerge from the interplay of ligand-ligand and ligand-solvent interactions that cannot be readily inferred from ligand chemical structure alone. In this work, we demonstrate that quantitative nanostructure-activity relationship (QNAR) models can employ descriptors calculated from molecular dynamics simulations to predict nanoparticle properties and cellular uptake. We performed atomistic molecular dynamics simulations of 154 monolayer-protected gold nanoparticles and calculated a small library of simulation-derived descriptors that capture nanoparticle structural and chemical properties in aqueous solution. We then parametrized QNAR models using interpretable regression algorithms to predict experimental measurements of nanoparticle octanol-water partition coefficients, zeta potentials, and cellular uptake obtained from a curated database. These models reveal that simulation-derived descriptors can accurately predict experimental trends and provide physical insight into what descriptors are most important for obtaining desired nanoparticle properties or behaviors in biological environments. Finally, we demonstrate model generalizability by predicting cell uptake trends for 12 nanoparticles not included in the original data set. These results demonstrate that QNAR models parametrized with simulation-derived descriptors are accurate, generalizable computational tools that could be used to guide the design of monolayer-protected gold nanoparticles for biological applications without laborious trial-and-error experimentation.

Determinants of gold nanoparticle interactions with Proteins: Off-Target effect study

Photothermal therapy is one of the promising approaches toward cancer treatment. To date, several compounds have been developed for this application, among which nanoparticles are attracting ever-increasing attention. One of the obstacles in developing efficient photothermal nanoparticle agents is their off-target effect which is mainly mediated via non-specific interactions with proteins. Such interaction not only reduces the bioavailability of the agent but also will cause protein aggregation that can be lethal. So, gaining knowledge on the mechanisms mediating such interactions will facilitate development of more effective agents. Our last studies showed the mechanism of action of two modified gold nanoparticles, folic acid functionalized gold nanoparticles (FA-AuNPs) and gold shelled Fe₃O₄ nanoparticles (AuFeNPs), as photothermal agents. In the current work, we focus on the interaction of these two NPs with human serum albumin (HSA) and human hemoglobin (Hb) as model proteins. The complex formation between NPs and proteins was investigated by fluorescence spectroscopy, dynamic light scattering and circular dichroism. Our data distinguishes the very distinct mode of interaction of charged and neutral NPs with proteins. While the interaction of neutral AuFeNP to proteins is protein dependent, charged nanoparticles FA-AuNP interact indistinguishably with all proteins via electrostatic interactions. Moreover, complexes obtained from FA-AuNPs with proteins are more stable than that of AuFeNP. However, the secondary structure content of proteins in the presence of NPs indicates the insignificant effect of NPs on the secondary structure of these proteins. Our data propose that the charge functionalization of the NPs is an effective way for modulating the interaction of nanoparticles with proteins.

Environmental Fate and Toxicity of Sunscreen-Derived Inorganic Ultraviolet Filters in Aquatic Environments: A Review

An increasing number of inorganic ultraviolet filters (UVFs), such as nanosized zinc oxide (nZnO) and titanium dioxide (nTiO2), are formulated in sunscreens because of their broad UV spectrum sunlight protection and because they limit skin damage. However, sunscreen-derived inorganic UVFs are considered to be emerging contaminants; in particular, nZnO and nTiO2 UVFs have been shown to undergo absorption and bioaccumulation, release metal ions, and generate reactive oxygen species, which cause negative effects on aquatic organisms. We comprehensively reviewed the current study status of the environmental sources, occurrences, behaviors, and impacts of sunscreen-derived inorganic UVFs in aquatic environments. We find that the associated primary nanoparticle characteristics and coating materials significantly affect the environmental behavior and fate of inorganic UVFs. The consequential ecotoxicological risks and underlying mechanisms are discussed at the individual and trophic transfer levels. Due to their persistence and bioaccumulation, more attention and efforts should be redirected to investigating the sources, fate, and trophic transfer of inorganic UVFs in ecosystems.

Gold-Nanoparticle-Conjugated Citrate Inhibits Tumor Necrosis Factor-α Expression via Suppression of Nuclear Factor Kappa B (NF-κB) Activation in Breast Cancer Cells

One of the leading causes of death worldwide is cancer. Excessive production of tumor necrosis factor (TNF)-α is known to activate nuclear transcription factor (NF)-κB, which plays a lethal role in the onset of multiple disorders including cancer. In this study, we aimed to determine the therapeutic role of novel gold nanoparticles conjugated with citrate (AuNPs-CIT) on the elevated expression of TNF-α in breast cancer cells. AuNPs-CIT were synthesized by the citrate-reduction method and were characterized by UV-VIS spectroscopic analysis, zeta-potential analysis, and size analysis. The potential of these newly generated AuNPs-CIT particles was tested on phorbol 12-myristate 13-acetate (PMA)-stimulated cancer cells. Our data showed that the AuNPs-CIT were spherical, with a mean size of 21.3±0.65 nm and a stabilized zetapotential at -41.4±0.98 mV. These newly generated AuNPs-CIT nanoparticles inhibited PMA-induced activation and nuclear translocation of NF-κB p65 in MCF-7 cells. They also have the tendency to block TNF-α expression in stimulated cancer cells. In conclusion, AuNPs-CIT inhibits PMA-induced TNF-α mRNA and protein expression via deactivation of NF-κB signaling in breast cancer cells. These findings suggest that AuNPs-CIT might be useful in cancer treatment.

Core-shell structured polyaniline/polypyrrole composites promoted methane production from anaerobic sludge

The core-shell structured polypyrrole/polyaniline (PPy@PANI) were synthesized by in-situ polymerization method and were used as the conductive medium to enhance methane production from the anaerobic wastewater treatment. It was found that the PPy@PANI has a good performance on methane production from the anaerobic wastewater treatment, and it composites can improve the methane production rate and yield by 70.2% and 28.3% in the initial 4 h compared with the control group. A high methane production rate was achieved when the dosage of PPy@PANI was 0.6 g/L, which suggested that 0.6 g/L was the optimal dosage. Finally, the mechanisms involved in the improved methane production rate by the PPy@PANI were disclosed. The PPy@PANI can enrich the functional microorganisms to enhance both the degradation of organics and the electron transfer, which contributed to the improved methane production rate from the anaerobic wastewater treatment.

Isolation of Single-Domain Antibodies to Transmembrane Proteins Using Magnetized Yeast Cell Targets

The isolation of binding ligands from yeast-displayed combinatorial libraries has typically relied on the use of a soluble, recombinantly expressed form of the target protein when performing magnetic selections or fluorescence-activated cell sorting. When identifying binding ligands, appropriate target protein expression and subsequent purification represents a significant bottleneck. As an alternative, we describe the use of target proteins expressed on the surface of magnetized yeast cells in the selection of yeast-displayed nanobody libraries. In this approach, yeast cells displaying the target protein also co-express an iron oxide-binding protein; incubation with iron oxide nanopowder results in magnetization of target-displaying cells. Alternatively, target-displaying cells are magnetized by nonspecific adsorption of iron oxide nanopowder. Subsequently, any library cells that interact with the magnetized target cells can be isolated using a magnet. Here, we detail protocols for the isolation of binders to membrane protein targets from a yeast display nanobody library using magnetized yeast cell targets. We provide guidance on how to generate magnetic yeast cell targets as well as library selection conditions to bias the isolation of high affinity binders. We also discuss how to assess the affinity and specificity of the isolated nanobodies using flow cytometry.

Nanoparticle-Based Drug Delivery System: The Magic Bullet for the Treatment of Chronic Pulmonary Diseases

Chronic pulmonary diseases encompass different persistent and lethal diseases, including chronic obstructive pulmonary disease (COPD), idiopathic pulmonary fibrosis (IPF), cystic fibrosis (CF), asthma, and lung cancers that affect millions of people globally. Traditional pharmacotherapeutic treatment approaches (i.e., bronchodilators, corticosteroids, chemotherapeutics, peptide-based agents, etc.) are not satisfactory to cure or impede diseases. With the advent of nanotechnology, drug delivery to an intended site is still difficult, but the nanoparticle's physicochemical properties can accomplish targeted therapeutic delivery. Based on their surface, size, density, and physical-chemical properties, nanoparticles have demonstrated enhanced pharmacokinetics of actives, achieving the spotlight in the drug delivery research field. In this review, the authors have highlighted different nanoparticle-based therapeutic delivery approaches to treat chronic pulmonary diseases along with the preparation techniques. The authors have remarked the nanosuspension delivery via nebulization and dry powder carrier is further effective in the lung delivery system since the particles released from these systems are innumerable to composite nanoparticles. The authors have also outlined the inhaled particle's toxicity, patented nanoparticle-based pulmonary formulations, and commercial pulmonary drug delivery devices (PDD) in other sections. Recently advanced formulations employing nanoparticles as therapeutic carriers for the efficient treatment of chronic pulmonary diseases are also canvassed.

Cytotoxicity of functionalized CeO2 nanoparticles towards Escherichia coli and adaptive response of membrane properties

The cytotoxicity and mechanisms of cerium oxide nanoparticles (CeO₂-NPs) on organisms have attracted great concerns recently, while that of CeO₂-NPs with functional groups remains unclear. This study investigated cytotoxic effects and mechanisms of CeO₂-NPs with hydroxyl, carboxyl, or amino functional groups towards a strain Escherichia coli (E. Coli). Results showed that CeO₂-NPs produced a stronger cytotoxicity in NaCl medium than in PBS medium at the concentrations of 10-400 mg/L. The toxicity followed the order of CeO₂-COOH > CeO₂-NH₂ > CeO₂-OH. Exposing to CeO₂-NPs increased cell membrane permeability and reduced membrane fluidity. The membrane phospholipid fatty acid compositions also varied greatly as a response to the stress of CeO₂-NPs, with the proportion of unsaturated fatty acids increased and saturated fatty acids decreased. Both intracellular reactive oxygen species (ROS) level and malonaldehyde (MDA) level declined, suggesting the oxidative stress from ROS may be not the primary reason for the membrane damage. Other mechanisms such as direct membrane oxidation by Ce⁴⁺ or physical penetration based on a close contact between nanoparticles and microbes might contribute to the membrane damages and cell viability loss. The present study provides a significant insight into the influence of functionalized CeO₂-NPs on a gram-negative bacterium.

Iron amendments minimize the first-flush release of pathogens from stormwater biofilters

First flush or the first pore volume of effluent eluted from biofilters at the start of rainfall contributes to most pollution downstream because it typically contains a high concentration of bacterial pathogens. Thus, it is critical to evaluate designs that could minimize the release of bacteria during a period of high risk. In this study, we test the hypothesis of whether an addition of iron-based media to biofilter could limit the leaching of Escherichia coli (E. coli), a pathogen indicator, during the first flush. We applied E. coli-contaminated stormwater intermittently in columns packed with a mixture of sand and compost (70:30 by volume, respectively) and iron filings at three concentrations: 0% (control), 3%, and 10% by weight. Columns packed with a mixture of sand and iron (3% or 10%) without compost were used to examine the maximum capacity of iron to remove E. coli. In columns with iron, particularly 10% by weight, the leaching of E. coli during the first flush was 32% lower than the leaching from compost columns, indicating that the addition of iron amendments could decrease first-flush leaching of E. coli. We attribute this result to the ability of iron to increase adsorption and decrease growth during antecedent drying periods. Although the addition of iron filings increased E. coli removal, the presence of compost decreased the adsorption capacity: exposure of 1 g of iron filings to 1 mg of DOC reduces E. coli removal by 8%. The result was attributed to the alteration of the surface charge of iron and blocking of adsorption sites shared by E. coli and DOC. Collectively, these results indicate that the addition of sufficient amounts of iron media could decrease pathogen leaching in the first flush effluent and increase the overall biofilter performance and protect downstream water quality.

Synthesis, Characterization, Applications, and Toxicity of Green Synthesized Nanoparticles

Nanotechnology is a cutting-edge area with numerous industrial applications. Nanoparticles are structures that have dimensions ranging from 1-100 nm which exhibit significantly different mechanical, optical, electrical, and chemical properties when compared with their larger counterparts. Synthetic routes that use natural sources, such as plant extracts, honey, and microorganisms are environmentally friendly and low-cost methods that can be used to obtain nanoparticles. These methods of synthesis generate products that are more stable and less toxic than those obtained using conventional methods. Nanoparticles formed by titanium dioxide, zinc oxide, silver, gold, and copper, as well as cellulose nanocrystals are among the nanostructures obtained by green synthesis that have shown interesting applications in several technological industries. Several analytical techniques have also been used to analyze the size, morphology, hydrodynamics, diameter, and chemical functional groups involved in the stabilization of the nanoparticles as well as to quantify and evaluate their formation. Despite their pharmaceutical, biotechnological, cosmetic, and food applications, studies have detected their harmful effects on human health and the environment; and thus, caution must be taken in uses involving living organisms. The present review aims to present an overview of the applications, the structural properties, and the green synthesis methods that are used to obtain nanoparticles, and special attention is given to those obtained from metal ions. The review also presents the analytical methods used to analyze, quantify, and characterize these nanostructures.

Computational enrichment of physicochemical data for the development of a ζ-potential read-across predictive model with Isalos Analytics Platform

The physicochemical characterisation data from a library of 69 engineered nanomaterials (ENMs) has been exploited in silico following enrichment with a set of molecular descriptors that can be easily acquired or calculated using atomic periodicity and other fundamental atomic parameters. Based on the extended set of twenty descriptors, a robust and validated nanoinformatics model has been proposed to predict the ENM ζ-potential. The five critical parameters selected as the most significant for the model development included the ENM size and coating as well as three molecular descriptors, metal ionic radius (r_ion), the sum of metal electronegativity divided by the number of oxygen atoms present in a particular metal oxide (Σχ/n_O) and the absolute electronegativity (χ_abs), each of which is thoroughly discussed to interpret their influence on ζ-potential values. The model was developed using the Isalos Analytics Platform and is available to the community as a web service through the Horizon 2020 (H2020) NanoCommons Transnational Access services and the H2020 NanoSoveIT Integrated Approach to Testing and Assessment (IATA).

Synergistic impacts of Cu2+ on simultaneous removal of tetracycline and tetracycline resistance genes by PSF/TPU/UiO forward osmosis membrane

Cu²⁺, tetracycline (TC), and corresponding tetracycline resistance genes (TRGs) are common micropollutants in aquaculture wastewater, which have great impact on environment and human health. In this study, we developed a thin-film nanocomposite (TFN) forward osmosis (FO) membrane with an electrospinning thermoplastic polyurethane/polysulfone (PSF/TPU) substrate and a UiO-66-NH₂ particle interlayer modified active layer. The effects of Cu²⁺ concentration on the synergetic removal of TC and TRGs (e.g., tetA/M/X/O/C, int1, and 16 S rRNA gene) were analyzed to determine the role of Cu²⁺ in FO process. The rejection mechanism was also analyzed in depth. Results demonstrated that the rejection of TC and Cu²⁺ was 99.53% and 97.99%. The rejection of TRGs exceeded 90% (specifically, over 99% for tetC) at a Cu²⁺ concentration of 500 μg/L when 0.5 M (NH₄)₂HPO₄ was used as draw solution. Complexation reaction between Cu²⁺ and TC, electrostatic interaction, and the adsorption of Cu²⁺ on membrane surface were the main contributing factors for the high rejection efficiencies. Altogether, the as-prepared FO membrane holds great potential for simultaneously removing heavy metals, antibiotics, and resistance genes in real wastewater.

The Synthesis Methodology of PEGylated Fe3O4@Ag Nanoparticles Supported by Their Physicochemical Evaluation

Many investigations are currently being performed to develop the effective synthesis methodology of magnetic nanoparticles with appropriately functionalized surfaces. Here, the novelty of the presented work involves the preparation of nano-sized PEGylated Fe3O4@Ag particles, i.e., the main purpose was the synthesis of magnetic nanoparticles with a functionalized surface. Firstly, Fe3O4 particles were prepared via the Massart process. Next, Ag+ reduction was conducted in the presence of Fe3O4 particles to form a nanosilver coating. The reaction was performed with arabic gum as a stabilizing agent. Sound energy-using sonication was applied to disintegrate the particles' agglomerates. Next, the PEGylation process aimed at the formation of a coating on the particles' surface using PEG (poly(ethylene glycol)) has been performed. It was proved that the arabic gum limited the agglomeration of nanoparticles, which was probably caused by the steric effect caused by the branched compounds from the stabilizer that adsorbed on the surface of nanoparticles. This effect was also enhanced by the electrostatic repulsions. The process of sonication caused the disintegration of aggregates. Formation of iron (II, III) oxide with a cubic structure was proved by diffraction peaks. Formation of a nanosilver coating on the Fe3O4 nanoparticles was confirmed by diffraction peaks with 2θ values 38.15° and 44.35°. PEG coating on the particles' surface was proven via FT-IR (Fourier Transform Infrared Spectroscopy) analysis. Obtained PEG-nanosilver-coated Fe3O4 nanoparticles may find applications as carriers for targeted drug delivery using an external magnetic field.

Antibacterial Activity of Positively and Negatively Charged Hematite (α-Fe2O3) Nanoparticles to Escherichia coli, Staphylococcus aureus and Vibrio fischeri

In the current study, the antibacterial activity of positively and negatively charged spherical hematite (α-Fe2O3) nanoparticles (NPs) with primary size of 45 and 70 nm was evaluated against clinically relevant bacteria Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) as well as against naturally bioluminescent bacteria Vibrio fischeri (an ecotoxicological model organism). α-Fe2O3 NPs were synthesized using a simple green hydrothermal method and the surface charge was altered via citrate coating. To minimize the interference of testing environment with NP's physic-chemical properties, E. coli and S. aureus were exposed to NPs in deionized water for 30 min and 24 h, covering concentrations from 1 to 1000 mg/L. The growth inhibition was evaluated following the postexposure colony-forming ability of bacteria on toxicant-free agar plates. The positively charged α-Fe2O3 at concentrations from 100 mg/L upwards showed inhibitory activity towards E. coli already after 30 min of contact. Extending the exposure to 24 h caused total inhibition of growth at 100 mg/L. Bactericidal activity of positively charged hematite NPs against S. aureus was not observed up to 1000 mg/L. Differently from positively charged hematite NPs, negatively charged citrate-coated α-Fe2O3 NPs did not exhibit any antibacterial activity against E. coli and S. aureus even at 1000 mg/L. Confocal laser scanning microscopy and flow cytometer analysis showed that bacteria were more tightly associated with positively charged α-Fe2O3 NPs than with negatively charged citrate-coated α-Fe2O3 NPs. Moreover, the observed associations were more evident in the case of E. coli than S. aureus, being coherent with the toxicity results. Vibrio fischeri bioluminescence inhibition assays (exposure medium 2% NaCl) and colony forming ability on agar plates showed no (eco)toxicity of α-Fe2O3 (EC50 and MBC > 1000 mg/L).

Use of Target-Displaying Magnetized Yeast in Screening mRNA-Display Peptide Libraries to Identify Ligands

This work presents the first use of yeast-displayed protein targets for screening mRNA-display libraries of cyclic and linear peptides. The WW domains of Yes-Associated Protein 1 (WW-YAP) and mitochondrial import receptor subunit TOM22 were adopted as protein targets. Yeast cells displaying WW-YAP or TOM22 were magnetized with iron oxide nanoparticles to enable the isolation of target-binding mRNA-peptide fusions. Equilibrium adsorption studies were conducted to estimate the binding affinity (KD) of select WW-YAP-binding peptides: KD values of 37 and 4 μM were obtained for cyclo[M-AFRLC-K] and its linear cognate, and 40 and 3 μM for cyclo[M-LDFVNHRSRG-K] and its linear cognate, respectively. TOM22-binding peptide cyclo[M-PELNRAI-K] was conjugated to magnetic beads and incubated with yeast cells expressing TOM22 and luciferase. A luciferase-based assay showed a 4.5-fold higher binding of TOM22+ yeast compared to control cells. This work demonstrates that integrating mRNA- and yeast-display accelerates the discovery of peptide ligands.

Iron oxide-mediated photo-Fenton catalysis in the inactivation of enteric bacteria present in wastewater effluents at neutral pH

The pressure on natural water resources associated with increasing water scarcity highlights the value of using reclaimed water through the development of efficient and environmentally friendly treatment technologies. In this work, the use of magnetic nanoparticles in photo-Fenton catalysis for water disinfection was considered to inactivate natural enteric bacteria present in municipal wastewater effluents under white light and neutral pH. The most recommended ranges were evaluated in key variables such as the loading and composition of nanoparticles (NPs), hydrogen peroxide (H₂O₂) concentration, the light source (UV and visible) and treatment time were evaluated in wastewater disinfection expressed in terms of total coliforms and Escherichia coli colony forming units (CFU). The magnetic separation of NPs allowed the disinfection process to be carried out in different cycles, facilitating the recovery of the nanocatalyst and avoiding its discharge with the treated effluent.

Metal Nanoparticles for Improving Bactericide Functionality of Usual Fibers

A wide variety of microbiological hazards stimulates a constant development of new protective materials against them. For that, the application of some nanomaterials seems to be very promising. Modification of usual fibers with different metal nanoparticles was successfully illustrated in the work. Tantal nanoparticles have shown the highest antibacterial potency within fibrous materials against both gram-positive (Bacillus subtilis) and gram-negative (Escherichia coli) bacteria. Besides, the effect of tantal nanoparticles towards luminescent Photobacterium phosphoreum cells estimating the general sample ecotoxicity was issued for the first time.

Toward Sustainable Tackling of Biofouling Implications and Improved Performance of TFC FO Membranes Modified by Ag-MOF Nanorods

In this work, nanorods with high antibacterial properties were synthesized with silver acetate as the metal source and 2-aminoterephthalic acid as the organic linker and were then embedded into thin-film composite (TFC) membranes to amend their performance as well as to alleviate biofouling. Silver metal-organic framework (Ag-MOF) nanorods with a length smaller than 40 nm were incorporated within the polyamide thin selective layer of the membranes during interfacial polymerization. The interaction of the synthesized nanorods with the polyamide was favored because of the presence of amine-containing functional groups on the nanorod's surface. The results of X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and atomic force microscopy characterizations proved the presence of Ag-MOF nanorods in the selective layer of thin-film nanocomposite (TFN) membranes. TFN membranes demonstrated improved water permeance, salt selectivity, and superior antibacterial properties. Specifically, the increased hydrophilicity and antibacterial potential of the TFN membranes led to a synergetic effect toward biofouling mitigation. The number of live bacteria attached to the surface of the neat TFC membrane decreased by more than 92% when a low amount of Ag-MOF nanorods (0.2 wt %) was applied. Following contact of the TFN membrane surface with Escherichia coli and Staphylococcus aureus, full inactivation, and degradation of bacteria cells were observed with microscopy, colony-forming unit tests, and disc inhibition zone analyses. This result translated to a negligible amount of the biofilm formed on the active layer. Indeed, the incorporation of Ag-MOF nanorods decreased the metal-ion release rate and therefore provided prolonged antibacterial performance.

The Effectiveness of Nafion-Coated Stainless Steel Surfaces for Inhibiting Bacillus Subtilis Biofilm Formation

Stainless steel is one of most commonly used materials in the world; however, biofilms on the surfaces of stainless steel cause many serious problems. In order to find effective methods of reducing bacterial adhesion to stainless steel, and to investigate the role of electrostatic effects during the formation of biofilms, this study used a stainless steel surface that was negatively charged by being coated with Nafion which was terminated by sulfonic groups. The results showed that the roughness of stainless steel discs coated with 1% Nafion was similar to an uncoated surface; however the hydrophobicity increased, and the Nafion-coated surface reduced the adhesion of Bacillus subtilis by 75% compared with uncoated surfaces. Therefore, a facile way to acquire antibacterial stainless steel was found, and it is proved that electrostatic effects have a significant influence on the formation of biofilms.

The critical role of the dispersant agents in the preparation and ecotoxicity of nanomaterial suspensions

This work reports the role of different dispersants, namely, polyethylene glycol (PEG 200 2%), ethylene glycol 5%, ethanol 2%, dimethyl sulfoxide (DMSO 5%), and polyvinyl alcohol (PVA 5%) in the toxicity profile of several commercial nanomaterials (NM), such as hydrophilic and hydrophobic TiO₂, hydrophilic SiO₂, SiO₂ in aqueous suspension (aq), and ZnO towards the bioluminescent bacterium Aliivibrio fischeri. The majority of NM showed tendency to form agglomerates in the different dispersants. Although some particle agglomeration could be detected, DMSO at 5% was the best dispersant for hydrophobic TiO₂ NM while PVA at 5% was the most effective dispersant for the other types of NM. Average size was not the most relevant aspect accounting for their toxicity. A remarkable reduction in average size was followed by a decrease in NM toxicity, as demonstrated for SiO₂ aq. in PVA 5%. Contrarily, despite of high particle agglomeration, ZnO NM showed a higher toxicity to bacteria when compared with other tested NM. Independently of the average particle size or surface charge, the dispersant either enhanced the toxicity to bacteria or acted as physical barrier decreasing the NM harmful effect to A. fischeri.

Size and surface charge characterization of nanoparticles with a salt gradient

Exosomes are nanometer-sized lipid vesicles present in liquid biopsies and used as biomarkers for several diseases including cancer, Alzheimer’s, and central nervous system diseases. Purification and subsequent size and surface characterization are essential to exosome-based diagnostics. Sample purification is, however, time consuming and potentially damaging, and no current method gives the size and zeta potential from a single measurement. Here, we concentrate exosomes from a dilute solution and measure their size and zeta potential in a one-step measurement with a salt gradient in a capillary channel. The salt gradient causes oppositely directed particle and fluid transport that trap particles. Within minutes, the particle concentration increases more than two orders of magnitude. A fit to the spatial distribution of a single or an ensemble of exosomes returns both their size and surface charge. Our method is applicable for other types of nanoparticles. The capillary is fabricated in a low-cost polymer device.

Exosomes are used as disease biomarkers, but their characterization in biological samples is challenging. Here the authors achieve simultaneous characterization of size and zeta potential of individual nanoparticles and particle mixtures at physiological salinity conditions, exploiting a salt gradient in a capillary channel.

Magnetic Materials and Systems: Domain Structure Visualization and Other Characterization Techniques for the Application in the Materials Science and Biomedicine

Magnetic structures have attracted a great interest due to their multiple applications, from physics to biomedicine. Several techniques are currently employed to investigate magnetic characteristics and other physicochemical properties of magnetic structures. The major objective of this review is to summarize the current knowledge on the usage, advances, advantages, and disadvantages of a large number of techniques that are currently available to characterize magnetic systems. The present review, aiming at helping in the choice of the most suitable method as appropriate, is divided into three sections dedicated to characterization techniques. Firstly, the magnetism and magnetization (hysteresis) techniques are introduced. Secondly, the visualization methods of the domain structures by means of different probes are illustrated. Lastly, the characterization of magnetic nanosystems in view of possible biomedical applications is discussed, including the exploitation of magnetism in imaging for cell tracking/visualization of pathological alterations in living systems (mainly by magnetic resonance imaging, MRI).