Rapid and tunable selective adsorption of dyes using thermally oxidized nanodiamond

Facile synthesis of amino-modified magnetic covalent organic framework for the efficient extraction and determination of anionic azo dyes in carbonated beverages

In this work, a novel magnetic covalent organic framework (COF (TpPa-NH2) @ Fe3O4) was prepared via two step by simple solvent method for the extraction of anionic azo dye residues in food. The as-prepared COF (TpPa-NH2) @ Fe3O4 nanocomposite was characterised by scanning electron microscope, transmission electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction and vibrating sample magnetometer. Before high-performance liquid chromatography with ultraviolet detection (HPLC-UV) determination, it was used as magnetic adsorbent for magnetic solid-phase extraction (MSPE) to extract and pre-concentrate three anionic azo dyes in carbonated beverage samples. The several key extraction and desorption parameters affecting the extraction recovery rate were investigated, including extraction time, pH of the solution, amount of material, adsorption time, elution solvent, pH of elution solvent, type of elution solvent, elution volume and elution time. Under optimised conditions, this method has good linearity between 5 and 500 μg L-1 (correlation coefficient > 0.9986). The limit of detection was 2.3-3.4 μg L-1. The recoveries of the samples were between 87.5 and 96.9%, and the relative standard deviation lower than 4.6%. The developed method has broad application prospects for the analysis of anionic azo dyes in carbonated beverages.

Adsorption behavior and mechanism of modified Pinus massoniana pollen microcarriers for extremely efficient and rapid adsorption of cationic methylene blue dye

Herein, a novel biosorbent was successfully fabricated through a two-step process employing Pinus massoniana pollen as raw material. The efficacy of this biosorbent in eliminating methylene blue (MB), a typical organic cationic dye, from highly concentrated industrial wastewater was investigated. The results demonstrated that by adjusting the wettability of pollen microcarriers, it is possible to significantly increase their adsorption capacity for cationic dyes, resulting in a remarkable 25-fold improvement. The modified Pinus massoniana pollen microcarriers (MPPMC) exhibited an optimal adsorption capacity (585 mg/g) under specific conditions and a rapid equilibrium (97.6% in 5 min, uptake 487.8 mg/g) even at room temperature, showing excellent performance in removing MB efficiently and quickly. It is worth noting that the modified microcarriers could be regenerated via a simple pH-controlled adsorption-desorption cycle, maintaining their superior efficiency (> 99%) even after undergoing five cycles, indicating their excellent reproducibility. The MB adsorption process on MPPMC obeyed the pseudo-second-order kinetic model and followed the Langmuir model. Through the introduced modifications, the substantial deprotonation of carboxyl groups notably augmented electrostatic and hydrogen bonding interactions between MPPMC and MB. Overall, this study offers a sustainable, eco-friendly biological adsorbent, and the MPPMC exhibit the considerable potential for efficient and rapid removal of organic cationic dyes in wastewater.

Highly porous organoclay-supported bimetal-organic framework (CoNi-MOF/OC) composite with efficient and selective adsorption of organic dyes

Herein, a highly porous bimetal-organic framework (bi-MOF) based on cobalt and nickel was successfully in situ grown on organoclay (OC) clusters by solvothermal method. Accordingly, the hierarchical porous CoNi-MOF/OC composite with a superior specific surface area of 2046 m²/g and a large pore volume of 0.763 cm³/g was obtained, which facilitated the adsorption of organic dyes. A morphological study using scanning electron microscopy indicated the formation of uniform bi-MOF crystals on the OC plates. Furthermore, the single- and multi-dye adsorption assays were implemented to precisely evaluate the adsorption capacity and selectivity of CoNi-MOF/OC composite to anionic and cationic dyes. The results revealed a high adsorption capacity of 58.61 mg/g at an adsorbent content of 15 mg, initial dye concentration of 20 ppm, and contact time of 25 min for MB, which is superior to several existing clay-based adsorbents. The adsorption kinetics study showed that the adsorption of cationic and anionic dyes onto the CoNi-MOF/OC composite followed the pseudo-second-order kinetic model. Interestingly, the regeneration study showed appropriate reusability and stability of the CoNi-MOF/OC composite for the removal of organic dyes with an almost unchanged structure after four regeneration cycles. The results of this study provide new insights for the rational design and fabrication of next-generation clay-based adsorbent by combining the synergistic advantages of bi-MOF with superior specific surface area and pore volume with organoclay composition and structure.

Insight into microwave-assisted synthesis of the chitosan-MOF composite: Pb(II) adsorption

Heavy metal contamination has increased over the globe, causing significant environmental issues owing to direct and indirect releases into water bodies. As a result, metal removal from water entities must be addressed soon. Various adsorbents such as MOFs and chitosan have demonstrated promising results in water treatment. The present study prepared a composite material (chitosan-UiO-66-glycidyl methacrylate MOF) by a microwave-assisted method. The structure and morphology of the chitosan-MOF composite were studied using FE-SEM, EDX, XRD, BET, FT-IR, and TGA techniques. In addition, the adsorption of Pb(II) from aqueous solution onto the chitosan-MOF composite was analyzed in a batch study concerning pH, contact time, initial metal ion concentration, and adsorbent dosage. The composite has a large surface area of 867 m²/g with a total pore volume of 0.51 cm³/g and thermal stability of up to 400 [Formula: see text]. Following an analysis of the adsorption isotherms, kinetics, and thermodynamics, the Langmuir model showed an excellent fit with the adsorption data (R² = 0.99) and chi-squared (X² = 3.609). The adsorption process was a spontaneous exothermic reaction and the pseudo-second-order rate equation fitted the kinetic profile well. Moreover, the composite is recyclable, retaining 83.45% of its removal effectiveness after 5 consecutive cycles, demonstrating it as a sustainable adsorbent for metal recovery. This study introduces a novel synthesized composite with enhanced recyclability and a higher potential for eliminating pollutants from industrial wastewater.

Biowaste-Derived, Highly Efficient, Reusable Carbon Nanospheres for Speedy Removal of Organic Dyes from Aqueous Solutions

The current work explores the adsorptive efficiency of carbon nanospheres (CNSs) derived from oil palm leaves (OPL) that are a source of biowaste. CNSs were synthesized at 400, 600, 800 and 1000 °C, and those obtained at 1000 °C demonstrated maximum removal efficiency of ~91% for malachite green (MG). Physicochemical and microscopic characteristics were analysed by FESEM, TEM, FTIR, Raman, TGA and XPS studies. The presence of surface oxygen sites and the porosity of CNSs synergistically influenced the speed of removal of MG, brilliant green (BG) and Congo red (CR) dyes. With a minimal adsorbent dosage (1 mg) and minimum contact time (10 min), and under different pH conditions, adsorption was efficient and cost-effective (nearly 99, 91 and 88% for BG, MG and CR, respectively). The maximum adsorption capacities of OPL-based CNSs for BG were 500 and 104.16 mg/g for MG and 25.77 mg/g for CR. Adsorption isotherms (Freundlich, Langmuir and Temkin) and kinetics models (pseudo-first-order, pseudo-second-order and Elovich) for the adsorption processes of all three dyes on the CNSs were explored in detail. BG and CR adsorption the Freundlich isotherm best, while MG showed a best fit to the Temkin model. Adsorption kinetics of all three dyes followed a pseudo-second-order model. A reusability study was conducted to evaluate the effectiveness of CNSs in removing the MG dye and showed ~92% efficiency even after several cycles. Highly efficient CNSs with surface oxygen groups and speedy removal of organic dyes within 10 min by CNSs are highlighted in this paper.

Enhanced adsorption performance of UiO-66 via modification with functional groups and integration into hydrogels

University of Oslo-66 (UiO-66) was a potential adsorbent for removing various pollutants from wastewater. Modifying the UiO-66 surface with different functional groups could enhance the adsorption performance. In this study, the UiO-66 modified with a functional group of -NH₂ or -NO₂ was prepared and tested to adsorb different pollutants. The results showed that -NO₂ modified UiO-66 increased the adsorption capacity of tetracycline by 17 times to 94.08 mg g^-1 compared with unmodified UiO-66. The adsorption process of UiO-66-NO₂ followed the pseudo-second-order adsorption kinetic model and Langmuir isotherm model with a maximum isotherm adsorption capacity of 127.32 mg g^-1. The adsorption interaction was hydrogen bonding and electrostatic attraction. The UiO-66-NO₂ also showed good adsorption performance to Co²⁺, Methylene blue, Congo red. Fixing UiO-66-NO₂ into hydrogel performed a stable absorption performance with a high absorption capacity (71.56 mg g^-1) to TC and a good regeneration rate (85%) after five cycles, providing a novel applicable way to remove pollutants from wastewater.

Efficient removal of heavy metal ions from aqueous media by unmodified and modified nanodiamonds

This article deals with the adsorption performances of the unmodified nanodiamond (ND) and thermally oxidized nanodiamond (Ox-ND) for the removal of different heavy metal ions such as Fe (III), Cu (II), Cr (VI), and Cd (II) from wastewater. The adsorption capacities of the ions onto adsorbents are higher and follow the order: Ox-ND-3 > Ox-ND-1.5 > ND, which is consistent with their surface areas, zeta potentials, and the presence of carboxyl groups, suggesting that electrostatic attractions between the positive metal ions and the negatively charged adsorbents are the predominant adsorption mechanisms. Adsorption capacities of these adsorbents were found to be 26.8, 31.3, and 45.7 mg/g for Fe (III), 25.2, 30.5, and 44.5 mg/g for Cu (II), 33.6, 44.1, and 55.9 mg/g for Cr (VI), and 40.9, 52.9, and 67.9 mg/g for Cd (II) over ND, Ox-ND-1.5, and Ox-ND-3, respectively. The impact of various operating parameters such as agitation time, initial metal ion concentration, temperature, pH solution, adsorbent dosage, and coexistence of the metal ions on the adsorption performance of Ox-ND-3 towards Cd (II) ions along with the batch adsorption experiments were performed. The equilibrium was reached in 120 min and adsorption data were fitted well with the pseudo-second-order kinetic as well as the Freundlich isotherm models. Adsorption process was spontaneous and exothermic, while the maximum removal efficiency of Cd (II) ions occurred at pH of 6.9 and at 4 g/L dosage. These findings demonstrated that thermally oxidized nanodiamond (Ox-ND) can be a versatile adsorbent to remove the Cd (II) ions from wastewater.

Fast and efficient adsorption of palladium from aqueous solution by magnetic metal-organic framework nanocomposite modified with poly(propylene imine) dendrimer

In this study, a magnetic metal-organic framework (MMOF) was synthesized and post-modified with poly(propyleneimine) dendrimer to fabricate a novel functional porous nanocomposite for adsorption and recovery of palladium (Pd(II)) from aqueous solution. The morphological and structural characteristics of the prepared material were identified by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmet-Teller (BET) isotherm, and vibrating sample magnetometer (VSM). The results confirmed the successful synthesis and post-modification of MMOF. Semispherical shape particles (20-50 nm) with appropriate magnetic properties and a high specific surface area of 120 m²/g were obtained. An experimental design approach was performed to show the effect of adsorption conditions on Pd(II) uptake efficiency of the dendrimer-modified magnetic adsorbent. The study showed that the Pd(II) uptake on dendrimer-modified MMOF was well described by the Langmuir isotherm model with the highest uptake capacity of 291 mg/g under optimal condition (adsorbent content of 12.5 mg, Pd ion concentration of 80 ppm, pH = 4, and contact time of 40 min). The adsorption kinetics of Pd(II) ions was suggested to be a pseudo-first-order model. The results revealed a faster adsorption rate and higher adsorption capacity (about 43%) for dendrimer-modified MMOF. Finally, the reusability of the provided adsorbent was evaluated. This work provides a valuable strategy for designing and developing efficient magnetic adsorbents based on MOFs for the adsorption and recovery of precious metals.

Multilayer Structure Ammoniated Collagen Fibers for Fast Adsorption of Anionic Dyes

Dye wastewater has become one of the difficult industrial wastewaters due to its significant characteristics such as high chroma and poor biodegradability. Here, we use collagen fibers (CFs) as the matrix, glutaraldehyde as the cross-linking agent, and polyethyleneimine (PEI) as the ammoniating modifier to prepare cationic-modified collagen fibers (CF-PEI). The CF-PEI still maintained the original fibrous structure with a larger adsorption area. The content of primary amino groups on CF-PEI was significantly increased, which not only improved the hydrophilic swelling performance of CFs but also improved the adsorption capacity. The adsorption capacity of CF-PEI for soap yellow and acid red could reach 538.2 and 369.7 mg g-1, respectively. The adsorption rate was fast, and the adsorption equilibrium could be reached in about 60 min. Desorption regeneration studies have shown that 0.1 mol L-1 HCl could achieve a better desorption effect, and the CF-PEI had a good recycling performance. The ammoniated modified CF-PEI was an excellent adsorption treatment material for anionic dye wastewater. It is expected to become an effective way for high-value resource utilization of waste dander in the leather industry.

Wastewater treatment nexus: Carbon nanomaterials towards potential aquatic ecotoxicity

Carbon nanomaterials (CNMs) provide an effective solution and a novel advancement for wastewater treatment. In this review, a total of 3823 bibliographic records derived from recent 10 years are visualized based on scientometric analysis. The results indicate metal-free CNMs-mediated advanced oxidation processes (AOPs) might be a motive force to develop CNMs application for wastewater treatment; however, corresponding evaluations of aquatic toxicity still lack sufficient attention. Therefore, recent breakthroughs and topical innovations related to prevalent wastewater treatment technologies (i.e., adsorption, catalysis and membrane separation) using three typical dimensional CNMs (nanodiamonds, carbon nanotubes, and graphene-based nanomaterials) are comprehensively summarized in-depth, along with a compendious introduction to some novel techniques (e.g., computational simulation) for identifying reaction mechanisms. Then, current research focusing on CNMs-associated aquatic toxicity is discussed thoroughly, mainly demonstrating: (1) the adverse effects on aquatic organisms should not be overlooked prior to large-scale CNMs application; (2) divergent consequences can be further reduced if the ecological niche of aquatic organisms is emphasized; and (3) further investigations on joint toxicity can provide greater beneficial insight into realistic exposure scenarios. Finally, ongoing challenges and developmental directions of CNMs-based wastewater treatment and evaluation of its aquatic toxicity are pinpointed and shaped in terms of future research.

Controlled surface functionalization of Ni-S nanostructures for pH-responsive selective and superior pollutants adsorption

Herein, we developed a synthetic strategy to functionalize Ni-S nanostructures (NS) using a facile precipitation method at moderate temperature. The surface functionality of NS is controlled by varying amount of mixed surfactants to achieve the pH-responsive selective adsorption of anionic and cationic dyes and the adsorption of ciprofloxacin (CIP) and tetracycline (TC) antibiotics. Powder XRD diffraction pattern revealed the phase of NS was changed from α-NiS to mixed phases after functionalization. The surface area of functionalized NS was significantly enhanced by ~5 times of that unfunctionalized NS as 6.6 m²g^-1 to 30.3 m²g^-1. The NS selectively adsorbed methyl orange (MO) at pH 4.5 and methylene blue (MB) at pH 11.5 with separation efficiency values of 94.2% and 97.9% respectively. The maximum adsorption capacity for MO, MB, TC and CIP are obtained as 1526.3, 1031.2, 1540.8 and 632.4 mg g^-1, respectively. The electrostatic interaction is predominantly involved in the adsorption of dyes whereas adsorption of antibiotics changed to hydrogen bonding and metal coordination. Thermodynamics parameters indicated exothermic and spontaneous adsorption of dyes. The optimized adsorbent is easily recyclable. Thus, the developed strategy of functionalization of nanostructures unveils a practical approach towards selective and efficient adsorption of organic pollutants.

Phytotoxic effect and molecular mechanism induced by nanodiamonds towards aquatic Chlorella pyrenoidosa by integrating regular and transcriptomic analyses

The growing diverse applications of nanodiamonds (NDs), especially as adsorbents and catalysts for wastewater treatment, have significantly increased their discharge and potential risk towards aquatic ecosystems. Although NDs have been certified for superior biocompatibility and lower toxicity towards numerous human cell lines, the characteristic response and underlying mechanism of aquatic microalgal response remains unclear. Here, the response of Chlorella pyrenoidosa to five concentrations of NDs was thoroughly investigated by comprehensive phenotypic and transcriptional examinations. Results indicated that higher concentration of NDs (50 mg/L) induced 75.4% growth inhibition, exacerbated oxidative stress and malformed morphology of microalgae after 48 h exposure. Meanwhile, the aggregated microalgae formed several flocs, apparently under 50 mg/L NDs. Noticeably, photosynthesis was susceptible to the NDs exposure. Although, the chlorophyll content and genes involved in photosynthesis were significantly improved by NDs, the results obtained from the photochemical parameters indicated that the excessive electrons during photosynthesis might be a pivotal reason for oxidative stress generation. Additionally, the genes included in amino acids metabolism and protein synthesis were up-regulated to alleviate the oxidative stress. Collectively, this work discloses the explicit molecular mechanisms of aquatic microalgae and provides comprehensive insights of potential aqueous environmental risk of gradually emergent NDs.

Ethylenediamine-functionalized Zr-based MOF for efficient removal of heavy metal ions from water

Ethylenediamine-functionalized Zr-based metal-organic framework (MOF, UiO-66-EDA) was prepared via Michael addition reaction to investigate its potential for adsorption of heavy metal ions from water. Specifically, the influence of agitation time, solution pH, the dosage of the adsorbent, initial metal ion concentration, temperature, and coexistence of other metal ions was investigated on the removal efficiency of UiO-66-EDA towards Pb(II), Cd(II), and Cu(II) metal ions. The pseudo-second-order kinetic model governed the adsorption of these ions onto the UiO-66-EDA. Langmuir isotherm model matched the experimental isotherm of adsorption with a maximum adsorption capacity of 243.90, 217.39, and 208.33 mg/g for Pb, Cd, and Cu ions, respectively. The adsorption of Pb, Cd, and Cu ions onto UiO-66-EDA was dependent on electron exchange, electron sharing, electrostatic and covalent interactions between the metal ions as well as the abundant functional groups on UiO-66-EDA surface. Thermodynamic parameters such as free energy changes (ΔG), standard enthalpy changes (ΔH), and standard entropy changes (ΔS) were calculated, which revealed spontaneous and endothermic nature of the adsorption process. The UiO-66-EDA was stable and recyclable during adsorption studies of Pb, Cd, and Cu ions, suggesting its potentiality as an adsorbent for heavy metals recovery.

Selective removal of anionic and cationic dyes by magnetic Fe3O4-loaded amine-modified hydrochar

Fe₃O₄-loaded protonated amine-modified hydrochar (Fe₃O₄-PAMH) was successfully prepared and characterized by scan electron microscopy equipped with energy-dispersion X-ray spectroscopy, zeta potential analysis, vibration sample magnetometry, Fourier transform infrared and X-ray photoelectron spectroscopies, Brunauer-Emmett-Teller measurement, and X-ray diffraction. Adsorption properties of Fe₃O₄-PAMH to negatively-charged methyl orange (MO) or positively-charged methylene blue (MB) in one- or two-component systems were evaluated. The Fe₃O₄-PAMH selectively adsorbed MO and MB at pH 5 and 11, respectively. The maximum MO and MB uptake capacities of Fe₃O₄-AMHC were 202.02 mg/g (pH 5.0) and 148.84 mg/g (pH 11) respectively. The Fe₃O₄-PAMH can be reused with simple pH management in adsorption-desorption cycles. The MB and MO adsorption abilities on Fe₃O₄-PAMH were maintained above 99% and 75% for five consecutive recycles, respectively. Thus, Fe₃O₄-PAMH shows powerful potential in efficiently and selectively adsorbing anionic or cationic dyes from mixed wastewater.

Microscopic insight into nanodiamond polymer composites: reinforcement, structural, and interaction properties

Nanodiamond (ND)-reinforced polymer composites attract a great deal of attention; however, insufficient understanding of their reinforced behavior is greatly limiting their further design and application. In this paper, a microscopic investigation of the stretched processes of aminated ND and resin composites is undertaken to elucidate the reinforcement mechanism of ND in the polymer matrix by employing molecular dynamics and semi-empirical quantum chemistry simulations. The stretching process and reinforcement behavior are observed on the nanoscale, and the nano-pinning effect of ND on the resin matrix is clarified. Further analyses indicate that due to the increase of system volume, the interactions between the ND and resin molecules increase with stretching; this facilitates the combination of ND and resin molecules and thus recovers the breakage of the resin matrix. This recovery process is regarded as the origin of the ND reinforcement of the polymer. The strong interaction between the ND and resin molecules is quantitatively assessed by the interpenetration of the van der Waals surface and the reduced density gradient analysis of electrons using quantum chemistry calculations. The high stability of their noncovalent combination is also revealed. This investigation provides an excellent approach for revealing the origin of ND reinforcement behavior and thus facilitates further optimization of the performance of the ND-polymer composites.

Photocatalytic Degradation of Quinoline Yellow over Ag3PO4

In this study, the ability of Ag3PO4 to achieve the photocatalytic degradation of quinoline yellow (QY) a hazardous and recalcitrant dye, under UVA and visible light was investigated. The photocatalyst Ag3PO4 was synthesized through a precipitation method, and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), BET Brunauer–Emmett-Teller (BET) analysis, UV-Differential Reflectance Spectroscopy (DRS) and Fourier transform infrared spectroscopy (FTIR). Ag3PO4 could successfully induce the photocatalytic degradation of QY under UVA and visible light. Optimal parameters were 0.5 g·L−1 of the catalyst, 20 ppm of QY and pH~7. Ag3PO4 was 1.6-times more efficient than TiO2 Degussa P25 under UVA light in degrading QY. Total organic carbon (TOC) analyses confirmed the almost complete QY mineralization. At least eight intermediate degradation products were identified by liquid chromatography coupled to high resolution mass spectrometry. The stability of Ag3PO4 was satisfactory as less than 5% Ag metal appeared in XRD analyses after 3 reuse cycles. These results show that under optimized conditions Ag3PO4 can efficiently achieve quinolone yellow mineralization.

Nanodiamond-stabilized Pickering emulsions: Microstructure and rheology

HYPOTHESIS

We envisage the use of hydroxylated detonation nanodiamonds (ND-OH), a relatively novel carbonaceous filler with high adsorption activity, small size, and large surface area to create Pickering emulsions. The emulsion behavior under shear and the extent to which the microstructure can rebuild after breakdown is dependent on its yield stress.

EXPERIMENTS

Using a model system consisting of isopropyl palmitate and water stabilized by ND-OH particles, we investigate the stability of these emulsions, their microstructure and rheological behavior as a function of ND-OH concentration.

FINDINGS

Confocal microscopy reveals that increasing ND-OH concentration results in smaller droplet sizes in the emulsions. This behavior is consistent with our rheological results of higher elastic modulus G' and yield stress of the emulsion with increased ND-OH, as the presence of smaller droplets facilitates the formation of a densely packed network. We find the rheological behavior of these emulsions to be a hybrid of colloidal gels and surfactant-stabilized emulsions, with interparticle interactions and droplets deformability dictating their elasticity and yield stress behavior. Structure recovery following large shear reveals the degree of microstructure recovery to depend on the applied stress, with the recovered modulus collapsing into a single master-curve when the applied stress is scaled by the yield stress.

Highly biocompatible multifunctional hybrid nanoparticles based on Fe3O4 decorated nanodiamond with superior superparamagnetic behaviors and photoluminescent properties

The multifunctional nanostructures with superparamagnetic and luminescent properties undergo revolution in the field of bio-nanotechnology. In this article, we reported a facile and efficient one-step modified co-precipitation method to load superparamagnetic Fe₃O₄ nanoparticle on oxidized nanodiamond (Ox-ND). Subsequently, the as-prepared Ox-ND/Fe₃O₄ hybrid nanoparticle was surface functionalized with vinyltrimethoxysilane (VTMS) to enhance its compatibility with organic media. The structure, morphology, magnetic, and optical properties of the nanohybrid were systematically investigated. The results confirmed successful loading of crystalline Fe₃O₄ on the surface of Ox-ND. Ox-ND/Fe₃O₄ multifunctional hybrid nanoparticle presented strong superparamagnetism (with a saturation magnetization of 67 emu/g at room temperature) and photoluminescence (blue emission) with good chemical reactivity. PrestoBlue assay indicated great biocompatibility of silanized Ox-ND/Fe₃O₄ in MCF-7 cells even at high concentrations, e.g. 7.2 mg/mL. The hybrid nanoparticle synthesized in this study potentially opens doors for high contrast imaging and targeted delivery applications.

Rapid simultaneous adsorption and SERS detection of acid orange II using versatile gold nanoparticles decorated NH2-MIL-101(Cr)

Acid orange II (AO II), a typical azo pigment, is strictly controlled by legislation and prohibited in foodstuffs. Herein, we prepared gold nanoparticles decorated amino-functionalized Cr-based metal-organic frameworks [NH₂-MIL-101(Cr)@Au] via an in-situ reduction method as a surface-enhanced Raman scattering (SERS) substrate for simultaneous adsorption and detection of AO II. Gold nanoparticles are uniformly dispersed on the surface of NH₂-MIL-101(Cr) owing to its three-dimensional (3D) structure and the interaction between -NH₂ and Au ions, providing more SERS-active "hot spots". These NH₂-MIL-101(Cr)@Au nanocomposites exhibited selective and high adsorption performance (419.85 mg g^-1) for AO II, and could be used as superior SERS substrates for the detection of AO II with a low limit of detection (LOD) of 0.05 mg L^-1 and wide detection range of 0.05-50 mg L^-1 using portable Raman spectrometer. Furthermore, this SERS assay has been successfully used to determine AO II in orange juice and chili powder with good sensitivities.

PPI-Dendrimer-Functionalized Magnetic Metal-Organic Framework (Fe3O4@MOF@PPI) with High Adsorption Capacity for Sustainable Wastewater Treatment

Herein, a magnetic zirconium-based metal-organic framework nanocomposite was synthesized by a simple solvothermal method and used as an adsorbent for the removal of direct and acid dyes from aqueous solution. To enhance its adsorption performance, poly(propyleneimine) dendrimer was used to functionalize the as-synthesized magnetic porous nanocomposite. The dendrimer-functionalized magnetic nanocomposite was characterized by field-emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibration sample magnetometer. The obtained results revealed the successful synthesis and functionalization of the magnetic nanocomposite. The adsorbents exhibited good magnetic properties with high saturation magnetization and high specific surface area. The adsorption isotherms and kinetics of anionic dyes were described by the Freundlich and pseudo-second-order models, respectively. It was found that the kinetics of adsorption of both the investigated dyes by the dendrimer-functionalized magnetic composite is considerably faster than the magnetic composite under the same condition. The adsorption capacity of the dendrimer-functionalized magnetic composite for investigated direct and acid dyes was 173.7 and 122.5 mg/g, respectively, which was higher than those of the existing magnetic adsorbents. This work provides new insights into the synthesis and application of hybrid magnetic adsorbents with synergistic properties of nanoporous metal-organic frameworks and dendrimer with a large number of functional groups for the removal of organic dyes.

Ultrafast and simultaneous removal of anionic and cationic dyes by nanodiamond/UiO-66 hybrid nanocomposite

In this research, UiO-66 and its composite nanoparticles with thermally oxidized nanodiamond (OND) were synthesized via a simple solvothermal method and utilized as solid adsorbent for the removal of anionic methyl red (MR) dye and cationic malachite green (MG) dye from contaminated water. The synthesized adsorbents were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), N₂ adsorption-desorption, and zeta potential analyzer. The influences of various factors such as initial concentrations of the dyes, adsorption process time, solution pH, solution temperature and ionic strength on adsorption behavior of MR dye onto OND-UiO hybrid nanoparticle were investigated. The adsorption of MR onto OND-UiO hybrid nanoparticle could be well described by Langmuir isotherm model. Meanwhile, pseudo-second order kinetic model was found to be suitable for illustration of adsorption kinetics of MR onto OND-UiO. Thermodynamic investigation suggested that the adsorption process was spontaneous and endothermic, and controlled by an entropy change instead of enthalpy effect. The experimental adsorption results indicated that OND-UiO hybrid nanoparticle could simultaneously adsorb 59% of MR and 43% of MG from the mixture of both dyes in only 2 min showing synergistic effect compared with single UiO-66 and OND nanoparticles in terms of adsorption rate and removal capacity of anionic dyes. The appropriate removal efficiency, rapid adsorption kinetic, high water stability, and good reusability make OND-UiO hybrid nanoparticle attractive candidate for simultaneously removal of both anionic MR and cationic MG dyes from wastewater.

Polymer/nanodiamond composites - a comprehensive review from synthesis and fabrication to properties and applications

Nanodiamond (ND) is an allotrope of carbon nanomaterials which exhibits many outstanding physical, mechanical, thermal, optical and biocompatibility characteristics. Meanwhile, ND particles possess unique spherical shape containing diamond-like structure at the core with graphitic carbon outer shell which intuitively contains many oxygen-containing functional groups at the outer surface. Such superior properties and unique structural morphology of NDs are essentially attractive to develop polymer composites with multifunctional properties. However, despite a long history from the discovery of NDs, which is dated back to the1960s, this nanoparticle has been less explored in the field of polymer (nano)composites compared with other carbon nanomaterials, e.g. carbon nanotube (CNT) and graphene. However, open literature indicates that research works in the field of polymer/ND (PND) composites have gained great momentum in the past half a decade. The present article provides a comprehensive review on recent achievements in ND based polymer composites. This review covers a very broad aspect from the synthesis, purification and functionalization of NDs to dispersion, preparation and fabrication of polymer/ND (PND) composites with a look in their recent applications for both structural and functional basis. Therefore, the review would be useful to pave the way for researchers to take some advancing steps in this respect.

Amide-functionalized ionic indium–organic frameworks for efficient separation of organic dyes based on diverse adsorption interactions

Two amide groups functionalized anionic indium–organic frameworks demonstrated efficient separation of organic dyes based on diverse adsorption interactions, and can be potentially applicable in column-chromatographic separation of dyes.

New multifunctional 3D porous metal–organic framework with selective gas adsorption, efficient chemical fixation of CO2 and dye adsorption

A new porous Mn(ii)-based MOF was obtained. The studies indicated it exhibits an effective storage capacity for CO₂, highly efficient catalyst behavior for epoxides with different substituents and rapid adsorption behavior of different dyes.