Adsorption of 17β-estradiol from aqueous solutions by a novel hierarchically nitrogen-doped porous carbon

Hydrothermal N-doping, magnetization and ball milling co-functionalized sludge biochar design and its selective adsorption of trace concentration sulfamethoxazole from waters

This study aimed to design an efficient and easily collected/regenerated adsorbent for trace concentration sulfamethoxazole (SMX) removal to eliminate its negative impacts on human health, reduce the risk of adsorbed SMX release and boost the reusability of adsorbent. Various multiple modified sludge-derived biochars (SBC) were synthesized in this work and applied to adsorb trace level SMX. The results demonstrated that hydrothermal N-doping, magnetization coupled with ball milling co-functionalized SBC (BMNSBC) displayed the greater adsorption ability for SMX. The maximum adsorption capacity of BMNSBC for SMX calculated by Langmuir model was 1.02 × 105 μg/g, which was 12.9 times of SBC. Characterization combined with adsorption experiments (e.g., models fitting) and DFT calculation confirmed that π-π conjugation, Lewis acid-base, pore filling and Fe3O4 complexation were the primary forces driving SMX binding to BMNSBC. These diversified physicochemical forces contributed to the fine anti-interference of BMNSBC to background substances (e.g., inorganic compounds and organic matter) and its remarkable adsorption ability for SMX in diverse real waters. The great magnetization strength of BMNSBC was advantage for its collection and efficient regeneration by NaOH desorption. Additionally, BMNSBC exhibited an outstanding security in view of its low leaching levels of iron (Fe) and total nitrogen (TN). The multiple superiority of BMNSBC enable it to be a prospective material for emerging contaminants (e.g., SMX) purification, also offering a feasible disposal approach for municipal waste (e.g., sludge).

A critical and comprehensive review of the current status of 17β-estradiol hormone remediation through adsorption technology

Even at low concentrations, steroid hormones pose a significant threat to ecosystem health and are classified as micropollutants. Among these, 17β-estradiol (molecular formula: C18H24O2; pKa = 10.46; Log Kow = 4.01; solubility in water = 3.90 mg L-1 at 27 °C; molecular weight: 272.4 g mol-1) is extensively studied as an endocrine disruptor due to its release through natural pathways and widespread use in conventional medicine. 17β-estradiol (E2) is emitted by various sources, such as animal and human excretions, hospital and veterinary clinic effluents, and treatment plants. In aquatic biota, it can cause issues ranging from the feminization of males to inhibiting plant growth. This review aims to identify technologies for remediating E2 in water, revealing that materials like graphene oxides, nanocomposites, and carbonaceous materials are commonly used for adsorption. The pH of the medium, especially in acidic to neutral conditions, affects efficiency, and ambient temperature (298 K) supports the process. The Langmuir and Freundlich models aptly describe isothermal studies, with interactions being of a low-energy, physical nature. Adsorption faces limitations when other ions coexist in the solution. Hybrid treatments exhibit high removal efficiency. To mitigate global E2 pollution, establishing national and international standards with detailed guidelines for advanced treatment systems is crucial. Despite significant advancements in optimizing technologies by the scientific community, there remains a considerable gap in their societal application, primarily due to economic and sustainable factors. Therefore, further studies are necessary, including conducting batch experiments with these adsorbents for large-scale treatment along with economic analyses of the production process.

Highly efficient removal of tetracyclines from water by a superelastic MOF-based aerogel: Mechanism quantitative analysis and dynamic adsorption

Metal-organic frameworks (MOFs) were promising adsorbents for removing antibiotics, but the inherent poor recyclability of MOF powders limits further application. Moreover, the dominant adsorption mechanisms and their quantitative assessment are less studied. Here, ultrahigh adsorption capacities of 821.51 and 931.87 mg g-1 for tetracycline (TC) and oxytetracycline (OTC), respectively, were realised by a novel adsorbents (biochar loaded with MIL-88B(Fe), denoted as BC@MIL-88B(Fe)), which were further immobilised in a 3D porous gelatin (GA) substrate. The obtained BCM/GA200 showed superior adsorption performance under wide pH ranges and under the interference of humic acid. Moreover, it can survive >8 cycles and even maintain high adsorption efficiency in different actual water samples. Notably, BCM/GA200 can selectively remove tetracyclines in a multivariate system containing other kinds of antibiotics and from a dynamic adsorption system. Most importantly, the results of X-ray photoelectron spectroscopy, 2D Fourier transform infrared correlation spectroscopy (2D-FTIR-COS) and density functional theory techniques revealed that (1) for TC adsorption, at pH < 4.0, the contribution of complexation was 25 %-45 %, whereas pore filling and hydrogen bonding accounted for 39 %-72 % of the total uptake. At 4.0 < pH < 10.0, the contribution of complexation increased to 60 %-82 %, whereas electrostatic attraction and π-π interaction were 4 %-13 % and 2 %-10 %, respectively. (2) For OTC adsorption, complexation was dominant at 3.0 < pH < 10.0, accounting for 55 %-86 % of the total uptake, and electrostatic attraction and π-π interactions caused 3 %-10 % and 3 %-15 %, respectively. (3) At pH > 10.0, pore filling dominated TC and OTC adsorption. Finally, the reaction sequences of the main adsorption mechanisms were also probed by 2D-FTIR-COS. This work solves the poor recyclability of MOF powders and provides a mechanistic insight into antibiotic removal by MOFs.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

A novel MIL-125(Ti)-based nanocomposite for enhanced adsorption and catalytic degradation of tetracycline hydrochloride: Synergetic mechanism of calcination and the nitrogen-containing reticulated surface layer

A multi-nitrogen conjugated organic molecule (TPE-2Py) was selected to surface modify the calcined MIL-125(Ti) to prepare a nanocomposite (TPE-2Py@DSMIL-125(Ti)) for adsorption and photodegradation of organic pollutant (tetracycline hydrochloride) under visible light. A novel reticulated surface layer was formed on the nanocomposite, and the adsorption capacity of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can reach 157.7 mg/g under neutral conditions, which is higher than that of most other reported materials. Kinetic and thermodynamic studies show that the adsorption is a spontaneous heat absorption process, dominated by chemisorption, in which electrostatic interaction, π-π conjugation and Ti-N covalent bonds played dominant roles. The photocatalytic study shows that the visible photo-degradation efficiency of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can further reach 89.1% after adsorption. Mechanism studies reveal that •O₂^- and h⁺ play a major role in the degradation process, and the separation and transfer rate of photo-generated carriers increase, improving its visible photocatalytic performance. This study revealed the relationship between the adsorption/photocatalytic properties of the nanocomposite and the structure of the molecular as well as the calcination, providing a convenient strategy to regulate the removal efficiency of MOFs materials towards organic pollutants. Furthermore, TPE-2Py@DSMIL-125(Ti) exhibits good reusability and even better removal efficiency for tetracycline hydrochloride in real water samples, indicating its sustainable treatment of pollutants in contaminated water.

Synergistic effect of hydrogen bonding and π-π interaction for enhanced adsorption of rhodamine B from water using corn straw biochar

Dyes adsorption to biochar via hydrogen bonding, and π-π interaction alone have attracted much research attention, however, their synergism in adsorption mechanisms remains largely unnoticed. The synergistic effects of the hydrogen bonding and π-π interaction might improve the adsorption capacity and need more understanding to prepare high-capacity biochar. In this work, we evaluated the adsorption of various dyes on biochar prepared via the activation of potassium bicarbonate and urea (named BC-KN) to explore their synergistic effects. Batch experiments indicated the BC-KN showed a high adsorption capacity to rhodamine B at 4839.0 mg/g, azure B at 4477.7 mg/g, and methylene blue at 2223.0 mg/g, respectively. The mechanism of such significant adsorption was investigated by their comparative experiments, characterizations, and computational analyses. The computational analyses suggested that the synergism of the hydrogen bonding and π-π interaction improves the adsorption energies of BC-KN/RhB system from -10.35 kcal/mol to -20.49 kcal/mol. It can be concluded that the hydrogen bonding and π-π interaction can synergize to significantly improve the adsorption by increasing the π-electron density and shortening the distance of aromatic rings, thus dyes with H-donor show significantly better adsorption capacities. The insight of hydrogen bonding being the governing factor in the synergistic system will help produce high-capacity biochar in removing aromatic dyes and suggest a sustainable technology for the efficient decolorization of dye effluent to minimize its damage to the health and environment.

Rapid adsorption of triclosan and p-chloro-m-xylenol by nitrogen-doped magnetic porous carbon

Contamination of water resources with organic substances like phenolic fungicides is undesirable due to the improvement of living standards, the huge production of chemicals, the heavy consumption of daily chemical products, and the growth of the population. In this study, Co-based zeolitic imidazole framework-67 (ZIF-67(Co)) was synthesized using the "one-pot method," and the best Co-based N-doped magnetic porous carbon (Co-NPC) was prepared by ZIF-67(Co) carbonization in an atmosphere of N₂. The materials were tested using an X-ray diffractometer (XRD), scanning electron microscope (SEM), infrared spectroscopy (IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), N₂ adsorption-desorption, and magnetization analysis. These characterizations indicated that the Co-NPC was successfully prepared. With the original morphology of ZIF-67(Co) crystals, the Co-NPC also has good porosity, magnetic properties, and a large specific surface area. In water, Co-NPC-800 has a good adsorption capacity for triclosan (TCS) and p-chloro-m-xylenol (PCMX), which are kinds of aromatic fungicides. The adsorption of Co-NPC-800 on both reached equilibrium within 3 min, which is in accordance with the quasi-second-order kinetic model. At 298 K, the maximum adsorption capacity of Co-NPC-800 for TCS and PCMX was 163 and 39 mg·g^-1, respectively. The adsorption of TCS and PCMX by Co-NPC-800 is a spontaneous endothermic process with reduced entropy. The combination of Co-NPC-800 and phenols come from multiple actions of electrostatic, π-π, and hydrogen bond effects. Moreover, Co-NPC-800 can be regenerated through simple washing and can be reused at least three times by a magnet. The Co-NPC-800 has good porosity, large specific surface area, comparable adsorption capacity, rapid adsorption time, so it could be broadly used in sewage treatments and other environmental fields.

N-Doped Biochar from Lignocellulosic Biomass for Preparation of Adsorbent: Characterization, Kinetics and Application

Medulla tetrapanacis is composed of a lignocellulosic biopolymer and has a regular porous structure, which makes it a potential biomass material for preparing porous N-doped biochar. Herewith, N-doped Medulla tetrapanacis biochar (UBC) was successfully prepared by modification with urea and NaHCO₃ under pyrolysis at 700 °C. The nitrogen-containing groups were efficiently introduced into biochar, and the micro-pore structures of the UBC were developed with sizeable specific surface area, which was loaded with massive adsorption sites. The adsorption kinetics and isotherms of the UBC conformed to pseudo-second-order and Langmuir model. The superior adsorption capacities of the UBC for methylene blue (MB) and congo red (CR) were 923.0 mg/g and 728.0 mg/g, and the capacities for Cu²⁺ and Pb²⁺ were 468.5 mg/g and 1466.5 mg/g, respectively. Moreover, the UBC had a stronger affinity for Cr³⁺ and Fe³⁺ in multiple metal ions and retained at a preferable adsorption performance for dyes and heavy metals after five cycles. Precipitation, complexation, and physical adsorption were the main mechanisms of the UBC-adsorbing metal ions and dyes. Thus, lignocellulosic biochar has great potential for removing dyes and heavy metals in aqueous solutions.

Removal mechanisms of Cd from water and soil using Fe-Mn oxides modified biochar

The development of remediation materials simultaneously suitable for Cd-contaminated water and soil is of great significance. In this study, the functional biochar (FM-RBC and FM-DBC) was prepared using branch and durian shell biochar (RBC and DBC, respectively) with iron-manganese oxide (Fe-Mn oxide) modification. The behaviors and mechanisms of Cd adsorption and stabilization in water and alkaline soil treated with FM-RBC and FM-DBC were explored. The results showed that the adsorption capacities of RBC and DBC for Cd had increased by 40-80 mg/g after the Fe-Mn oxide modification. The Cd adsorption was conformed to pseudo-second-order kinetic and the Langmuir isothermal models. After 35 days of soil cultivation, the maximum reduction rate of DTPA-Cd occurred in 3% FM-DBC treatments (37.73%), followed by in 3% FM-RBC (30.08%), all of which were significantly higher than that observed in 3% BC treatments (12.55-18.91%). Notably, the FM-RBC and FM-DBC treatments promoted the conversion of the exchangeable to the carbonate-bound and Fe/Mn oxyhydroxide fractions of Cd. The XRD, FTIR, and XPS analyses demonstrated that the loading amount of Fe-Mn oxide was positively correlated with the oxygen-containing functional group of biochar. CdO, Cd₂Mn₃O₈ and CdCO₃ were loaded on the FM-BC, indicating the existence of two main adsorption mechanisms: (1) the complexation with M-O (M: Fe, Mn) and acid oxygen-containing functional groups, (2) the precipitation with carbonate of Cd. In this work, we prepared two functional biochar that rapidly removes Cd from water and effectively fixes Cd in alkaline soil, thus, debasing the risk of Cd entry into the food chain.

Highly efficient removal of glyphosate from water by hierarchical-pore UiO-66: Selectivity and effects of natural water particles

The selective removal of glyphosate (GP) from aqueous environments is crucial for ensuring human health and environmental sustainability. The preparation of hierarchical-pore MOFs and the reasonable regulation of the pore size are effective strategies for achieving selective removal. In this study, we applied hierarchical-pore UiO-66 analogues (HUiO-66s) synthesized by the template technique through a mild method for the removal of GP from water. The results showed that the maximum adsorption capacity of HUiO-66s was as high as 400 mg/g, which is higher than that of most reported adsorbents. Notably, HUiO-66s showed the highest adsorption rate and distribution coefficient for GP in a multivariate system containing different organophosphorus pesticides and antibiotics, exhibiting suitable selective adsorption performance for GP. Furthermore, GP adsorption onto HUiO-66-2 (prepared from 2 mL of MOF-5 template) did not affect the presence of competing anions and humic acids. Naturally occurring particles in the water body had an enhanced (i.e., Al2O3, sepiolite, and montmorillonite), reduced (i.e., illite and SiO2), or insignificant (i.e., kaolin) effect on the GP adsorption rate of HUiO-66-2. Further analysis based on the bulk adsorption results and microscopic characterisation indicated that the pore structure synergistically occurred with metal-ligand bonding, hydrogen bonding, and electrostatic interactions, which together determined the GP adsorption. Overall, the high adsorption and apparent adsorption selectivity of HUiO-66s facilitated the rapid separation and removal of GP in complex aqueous environments. Our findings provide insights into the transport and fate of MOFs and contaminants in natural aquatic systems.

Potential of biocompatible calcium-based metal-organic frameworks for the removal of endocrine-disrupting compounds in aqueous environments

Rapid urbanization, industrialization and population growth have accelerated the amount and variety of emerging contaminants being released into the aqueous environment, including endocrine-disrupting compounds (EDCs). The introduction of these compounds constitutes a threat to human health and the environment, even at trace levels. Hence, new water treatment technologies are urgently required to effectively remove EDCs from water. The currently available technologies used in water remediation processes are expensive and ineffective, and some produce harmful by-products. Calcium-based metal-organic frameworks (Ca-MOFs) are porous synthetic materials that can potentially be applied as adsorbents. These MOFs are hydrolytically stable, biocompatible and low-cost compared with conventional porous materials. The structure of Ca-MOFs is maintained even though calcium metal centers in the structure can easily coordinate with water. Ca-MOFs and their composite derivatives have the potential for use in water purification because these biocompatible adsorbents have been shown to selectively extract a significant quantity of contaminants. This review highlights the potential of Ca-MOFs to adsorb EDCs from aqueous environments and discusses adsorbent preparation methods, adsorption mechanisms, removal capacity, water stability and recyclability. This review will support future efforts in synthesizing new biocompatible MOFs as an environmental treatment technology that can effectively remove EDCs from water, thereby improving environmental and human health.

Comparison of 17β-Estradiol Adsorption on Corn Straw- and Dewatered Sludge-Biochar in Aqueous Solutions

Removal of steroid hormones from aqueous environment is of prevailing concern because of their adverse impact on organisms. Using biochar derived from biomass as adsorbent to remove pollutants has become more popular due to its low cost, effectiveness, and sustainability. This study evaluated the feasibility of applying corn straw biochar (CSB) and dewatered sludge biochar (DSB) to reduce 17β-estradiol (E2) from aquatic solutions by adsorption. The experimental results showed that the adsorption kinetics and isotherm behavior of E2 on the two biochars were well described by the pseudo-second-order (R2 > 0.93) and Langmuir models (R2 > 0.97). CSB has higher E2 adsorption capacity than DSB, and the maximum adsorption capacity was 99.8 mg/g obtained from Langmuir model at 298 K, which can be attributed to the higher surface area, porosity, and hydrophobicity of this adsorbent. Higher pH levels (>10.2) decreased the adsorption capacities of biochar for E2, while the ionic strength did not significantly affect the adsorption process. The regeneration ability of CSB was slightly better than that of DSB. The possible adsorption mechanism for E2 on biochar is suggested as π−π interactions, H−bonding, and micropores filling. These results indicated that CSB has more potential and application value than DSB on reducing E2 from aqueous solutions when considering economy and removal performance.

Design and preparation of functional azo linked polymers for the adsorptive removal of bisphenol A from water: Performance and analysis of the mechanism

In order to effectively remove refractory bisphenol A (BPA) from water, a novel nitrogen doped organic porous functional azo linked polymer (ALP-p) was designed and prepared according to the physicochemical characteristics of propane linked to two phenol hydroxyl groups. This ALP-p was synthesized with 98.5% yield, from pararosaniline and phloroglucinol, via the diazo coupling reaction to produce multiple adsorption functional groups of benzene ring, hydroxyl group and azo group. This functional material showed high adsorption capacity of 357.8 mg/g for 50 mg/L BPA, at 20 °C. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir model, respectively. The major adsorption mechanisms were attributed to the high specific surface area (259.8 m²/g) and pore volume (0.56 cm³/g) related surface adsorption and pore diffusion through porous stereoscopic stacking cavity anchorage. The functional group from the three-dimensional skeleton structures of ALP-p for BPA anchoring endowed chemisorption via π-π interaction between benzene rings and hydrogen-bonding (O-H⋯O, C-H⋯N, C-H⋯O and C-H⋯C) with the hydrogen atom of benzene ring, -OH from BPA and -OH, NN from ALP-p, respectively. The coexisting organic pollutants and alkali environment posed a negative effect on adsorption, while salinity had no significant effect on the process. The adsorption capacity and recovery of ALP-p were >93.5% and 81.6% after five cycles of operation.

Efficient adsorptive removal of fluoroquinolone antibiotics from water by alkali and bimetallic salts co-hydrothermally modified sludge biochar

Fluoroquinolones are one of most commonly used antibiotics for preventing and treating bacterial infections and their unsatisfactory removal by conventional wastewater treatment technology have aroused widespread attention. A novel adsorbent of KMSBC was the first time synthesized and tested to adsorb three typical fluoroquinolone antibiotics of CIP, NOR and OFL from water. The characterization analysis showed that KMSBC possessed the superior porous structure, abundant functional groups and greater graphitic degree. Together with kinetics, isotherms, thermodynamics and critical factors (e.g., biochar dose, reaction time/temperature, fluoroquinolone antibiotics concentration, pH, co-existing ionic strength and HA concentration) analysis suggested that pore filling, π-π conjugation, H-bonding and electrostatic interaction were the key mechanisms for fluoroquinolone antibiotics adsorption by KMSBC. KMSBC exhibited the optimum adsorption performance at pH = 5 despite the adsorbates. The maximum adsorption capacity of KMSBC for CIP, NOR and OFL were 49.9, 55.7 and 47.4 mg/g at 25 °C, respectively. Also, KMSBC exhibited the good magnetic sensitivity and stability with the leaching concentrations of Fe were far below than environmental limit (GB5749-2006) at various pH (from 3 to 12), ionic strength and HA concentrations. Additionally, KMSBC performed a stable sustainable adsorption performance in recycles by NaOH regeneration. Thus, KMSBC had the potential to be a promising adsorbent for fluoroquinolone antibiotics removal with favorable adsorption capacity, environmental security and easy regeneration performance.

An efficient, green and sustainable potassium hydroxide activated magnetic corn cob biochar for imidacloprid removal

The extensive use of imidacloprid (IMI) has led to its being frequently detected in natural water, also caused the potential damage to the ecosystem. Development of efficient, green and sustainable technique is demanded to eliminate this problem. A novel biochar (KMCBC) derived from agriculture waste of corn cob was first time co-modified by potassium hydroxide (KOH), ferric chloride (FeCl₃) and zinc chloride (ZnCl₂), which showed the greater adsorption amount (410 mg g^-1 at 298 K) for imidacloprid (IMI). Pseudo-second-order kinetic and Langmuir isotherm models fitted well with the experimental data, together with the physicochemical characterization analysis, demonstrating that the adsorption process of IMI by KMCBC might be mainly controlled by micropore filling, π-π electron donor-acceptor and functional groups interactions (H-bonding and complexation). Additionally, the thermodynamics parameters suggested that IMI adsorption in this study was a spontaneous, endothermic and randomly increasing process. Besides, KMCBC owned the easy separation performance and promising environmental safety, also exhibited a high selective adsorption capacity regardless of solution pH (its optimum adsorption performance for IMI was obtained at pH = 5), inorganic ions strength and humic acid (HA) concentrations. The regenerated KMCBC (synergistic ultrasound/ethanol) could sustainably and efficiently adsorb IMI in the reuse cycles. Therefore, this study provided an efficient, green and sustainable adsorbent of KMCBC for IMI removal.

Facile fabrication and characterization of kenaf core as natural biochar for the highly efficient removal of selected endocrine-disrupting compounds

This study aims to formulate and fabricate the optimum condition of modified kenaf core (MKC) for the removal of targeted endocrine-disrupting compounds in a batch adsorption system. Kenaf core was chemically modified using phosphoric acid as an activating agent, which involved the pyrolysis step. Results indicated a significant difference (p < 0.05) for unmodified and novel modified biochar, observed in characteristic performance analysis via ultimate analysis, Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR) spectrum, and Brunauer-Emmett-teller (BET) surface area. The removal percentage of 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in individual and binary mixture systems was examined in order to ascertain the highest removal percentage for MKC application in an aqueous solution. The main and interaction effects of three prepared variables such as incorporate of impregnation concentration of an acid catalyst (0.1-1.0 M), particle size (45-1,000 µm), and dosage (1.0-20.0 g/L) were examined and statistically analyzed via design of experiment (DoE) through developed quadratic models. The removal efficiency of E2 and EE2 in an individual system leads to T₂KC > T₁KC > T₃KC, whereas that in the binary mixture system leads to T₂KC > T₁KC > T₃KC and T₁KC > T₂KC > T₃KC for E2 and EE2 adsorption, respectively, through hydrogen bonding and the π-π interaction mechanism. Thus, the findings revealed T₂KC at a moderate level of acid concentration (0.5 M H₃PO₄) to be a potential biochar, with an environmentally safe and sound profile for opposing emerging pollutant issues as well as for the attainment of sustainable development goals.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Influence of microplastics occurrence on the adsorption of 17β-estradiol in soil

High levels of steroid estrogens are continuously detected in the soil environment, and even the concentration in vegetables and fruits has reached levels that have an impact on children's health, which has attracted growing attention. Moreover, microplastics (MPs) in the soil system are also of increasing concern worldwide. The effects of MPs on the adsorption of organic pollutants in soil systems, however, remain largely unexplored. In this study, MPs common in greenhouse vegetable soil (polyethylene, polyvinyl chloride and polystyrene) were selected to investigate the effect of MPs occurrence on the adsorption of 17β‑estradiol (E2) in soil under various conditions. The experimental results showed that the adsorption capacity of MPs to E2 is stronger than that of soil. Moreover, the occurrence of MPs in soil increased the adsorption capacity for E2, and the addition amount and aging of MPs enhanced the promotion effect. This enhancement indicated that the input of MPs into soil might reduce the mobility of E2 by improving the adsorption capacity of the soil. These results deepen the understanding of the adsorption behavior of E2 in the coexisting system of MPs and soil and provide a theoretical basis for E2 pollution control.

Enhanced Adsorptive Removal of β-Estradiol from Aqueous and Wastewater Samples by Magnetic Nano-Akaganeite: Adsorption Isotherms, Kinetics, and Mechanism

A surfactant-free method was used to synthesize iron oxyhydroxide (akaganeite, β-FeOOH) nanorods and characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS), and transmission electron microscopy (TEM). The synthesized nanoadsorbent was applied for the adsorptive removal of β-estradiol from aqueous solutions. The parameters affecting the adsorption were optimized using a multivariate approach based on the Box–Behnken design with the desirability function. Under the optimum conditions, the equilibrium data were investigated using two and three parameter isotherms, such as the Langmuir, Freundlich, Dubinin–Radushkevich, Redlich–Peterson, and Sips models. The adsorption data were described as Langmuir and Sips isotherm models and the maximum adsorption capacities in Langmuir and Sips of the β-FeOOH nanorods were 97.0 and 103 mg g−1, respectively. The adjusted non-linear adsorption capacities were 102 and 104 mg g−1 for Langmuir and Sips, respectively. The kinetics data were analyzed by five different kinetic models, such as the pseudo-first order, pseudo-second order, intraparticle, as well as Boyd and Elovich models. The method was applied for the removal β-estradiol in spiked recoveries of wastewater, river, and tap water samples, and the removal efficiency ranged from 93–100%. The adsorbent could be reused up to six times after regeneration with acetonitrile without an obvious loss in the removal efficiency (%RE = 95.4 ± 1.9%). Based on the results obtained, it was concluded that the β-FeOOH nanorods proved to be suitable for the efficient removal of β-estradiol from environmental matrices.

Effects of heteroaggregation with metal oxides and clays on tetracycline adsorption by graphene oxide

Multiple nanoparticles (NPs) often coexist in water with contaminants, which inevitably affect the fate and transport of coexisted contaminants and other types of nanoparticles in actual water. This research was devoted to examine the adsorption of tetracycline (TC) on graphene oxide (GO) in the presence of different amounts of model engineered and natural NPs (m-NPs), including metal oxides (ZnO and Fe₂O₃), clays (kaolin and montmorillonite). The experimental results proved that the existence of m-NPs greatly enhanced the TC adsorption onto GO except for that at Fe₂O₃/GO = 10:1 and lengthened the adsorption equilibrium time. The enhanced adsorption amount of TC with increasing m-NPs/GO ratio was primarily due to the adsorption of TC onto m-NPs. In contrast, the slightly inhibitory effects by 10:1 Fe₂O₃/GO could be attributed to the blockage effect on GO surface by a small amount of Fe₂O₃. Compared with five m-NPs/adsorbents, m-NPs/GO had the greatest promoting efficiency on TC removal. Moreover, the heteroaggregation of GO with different m-NPs was studied in aqueous phase by microscopic, spectroscopic, and computational methods. Analysis showed that the electrostatic attraction between negatively charged GO and positively charged ZnO were likely to first heteroaggregate in binary systems of GO and ZnO, while GO were prone to homoaggregate owing to electrostatic repulsion with the same negatively charged montmorillonite (or kaolin). Besides, Fe₂O₃ tended to first homoaggregate and then heteroaggregate with GO. In summary, this report elucidated complex interactions between GO and m-NPs, which was crucial to fundamentally understand towards a predictive framework for describing the fate and migration of GO and m-NPs in actual water.

Synthesis a graphene-like magnetic biochar by potassium ferrate for 17β-estradiol removal: Effects of Al2O3 nanoparticles and microplastics

A graphene-like magnetic biochar (GLMB) was synthesized using lotus seedpod and potassium ferrate with simple step and applied for E2 adsorption. GLMB was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and BET surface area. Several common (solution pH, ionic strength, humic acid and foreign ions) and new (Al₂O₃ nanoparticles and microplastics (MPs)) water experiment conditions were investigated. Characterization results demonstrated that the sample was fabricated successfully and it possessed some graphene-like properties and a large surface area (828.37 m²/g). Adsorption results revealed that the pseudo-second-order kinetics and Langmuir isotherm models could provide a better description for E2 uptake behavior. The E2 adsorption capacity could be influenced by solution pH, ionic strength and SO₄^2- ions, and the effect of humic acid and background electrolyte (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, NO₃^-, PO₄^3-) could be neglected. The presences of Al₂O₃/MPs significantly decreased the time to reach adsorption equilibrium for E2 adsorption on GLMB, but had no obvious improvement or inhibiting effects on E2 removal when the adsorption reached equilibrium. The adsorption mechanism for E2 adsorption on GLMB was multiple, which involving π-π interactions, micropore filling effects, electrostatic interaction. The regeneration experiments showed that GLMB possessed a good regeneration performance. Based on the experimental results and comparative analysis with other adsorbents, GLMB was an economical, high-efficiency, green and recyclable adsorbent for E2 removal from aqueous solution.

Application and Properties of Microporous Carbons Activated by ZnCl2: Adsorption Behavior and Activation Mechanism

Herein, polypyrrole-based porous carbon (PPC) was prepared by ZnCl₂ activation for toluene adsorption from paraffin liquid. The structure properties were adjusted by a dosage of activating agents and carbonization temperature. The result with a 3:1 mass ratio of ZnCl₂/PPy at 600 °C showed the highest micropore area and percentage of micropore volume of 1105 m²/g and 86.26%, respectively. In addition, the PPC surface was rich in functional groups and obtained a high N-doped content from 7.00 to 8.82%. The toluene adsorption behavior onto the PPC was comprehensively investigated including isotherms, kinetics, and thermodynamics. The adsorption isotherm accorded with the Freundlich model well, and the kinetic model was fitted more closely to the pseudo-second-order chemisorption. The thermodynamic research uncovered that the adsorption was spontaneous and an endothermic process in essence. The ZnCl₂ activation mechanism is discussed based on TG/TGA curves and pore structure analysis at last. The devised way of synthesized microporous carbon is green and simple, which is suited to mass production for the adsorption of toluene from paraffin liquid and reducing environmental pollution.

ZIF-mediated N-doped hollow porous carbon as a high performance adsorbent for tetracycline removal from water with wide pH range

The N-doped porous carbon (NPC) and N-doped hollow porous carbons (NHPC-1 and NHPC-2) were fabricated using ZIF-8 and its composites (resorcinol and formaldehyde coated ZIF-8, ZIF-8@RF and tannic acid coated ZIF-8, ZIF-8@TA) as precursors via high-temperature pyrolysis and their applications for removing tetracycline (TC) from water were investigated. The various technologies, including SEM, TEM, FT-IR, Raman, N₂ adsorption-desorption, XRD and XPS were used to characterize the morphology, textual property, phase and microstructure of three porous carbon materials. The adsorption isotherms and kinetics of TC on three porous carbon materials were fitted well with Langmuir model and pseudo-2nd order model, respectively. In terms of the Langmuir model, the maximum TC adsorption capacities on the NPC, NHPC-1 and NHPC-2 were 180.2, 284.9 and 518.1 mg g^-1 at 25 °C, respectively. The excellent performance of NHPC-2 for TC removal is mainly attributed to the suitable pore size distribution and pore volume, high nitrogen contents and large amounts of defects. High TC adsorption was achieved in 3-10 pH range and hardly affected by humic acid. TC adsorption on NHPC-2 is spontaneous and endothermic process. The NHPC-2 kept excellent TC adsorption capacity even after eight cycles, showing its good repeatability. Our result indicates that the MOF-mediated N-doped hollow porous carbon is promising for the TC removal from aqueous media.

Adsorption of 17β-estradiol from aqueous solution by raw and direct/pre/post-KOH treated lotus seedpod biochar

Five biochars derived from lotus seedpod (LSP) were applied to examine and compare the adsorption capacity of 17β-estradiol (E2) from aqueous solution. The effect of KOH activation and the order of activation steps on material properties were discussed. The effect of contact time, initial concentration, pH, ionic strength and humic acid on E2 adsorption were investigated in a batch adsorption process. Experimental results demonstrated that the pseudo second-order model fitted the experimental data best and that adsorption equilibrium was reached within 20 hr. The efficiency of E2 removal increased with increasing E2 concentration and decreased with the increase of ionic strength. E2 adsorption on LSP-derived biochar (BCs) was influenced little by humic acid, and slightly affected by the solution pH when its value ranged from 4.0 to 9.0, but considerably affected at pH 10.0. Low environmental temperature is favorable for E2 adsorption. Chemisorption, π-π interactions, monolayer adsorption and electrostatic interaction are the possible adsorption mechanisms. Comparative studies indicated that KOH activation and the order of activation steps had significant impacts on the material. Post-treated biochar exhibited better adsorption capacity for E2 than direct treated, pre-treated, and raw LSP biochar. Pyrolyzed biochar at higher temperature improved E2 removal. The excellent performance of BCs in removing E2 suggested that BCs have potential in E2 treatment and that the biochar directly treated by KOH would be a good choice for the treatment of E2 in aqueous solution, with its advantages of good efficiency and simple technology.

Function of agricultural waste montmorillonite-biochars for sorptive removal of 17β-estradiol

Agricultural wastes of cow manure and wheat straw were used to prepare montmorillonite (Mt)-biochars (CMt and WMt) for sorptive removal of 17β-estradiol (E2) from aqueous solution. The E2 adsorption performance of the two Mt-biochars was investigated using systematic adsorption kinetics and isotherms. The results exhibited that the maximum E2 adsorption amount of CMt was 41.02 mg/g, while it was 62.89 mg/g for WMt. Meanwhile, intraparticle diffusion model demonstrated that intraparticle diffusion was not the only rate-limiting step, both film diffusion and intraparticle diffusion were involved in the diffusion process. Higher pH levels (>10) decreased the adsorption capacities of Mt-biochars for E2. However, the ionic strength and the background electrolytes did not significantly affect adsorption process. Moreover, the two Mt-biochars both exhibited excellent regeneration and reusability. These results provided a potential solution to the recycling of agricultural wastes and the problem of estrogen contaminant.

Edible fungus slag derived nitrogen-doped hierarchical porous carbon as a high-performance adsorbent for rapid removal of organic pollutants from water

In this work, agricultural waste edible fungus slag derived nitrogen-doped hierarchical porous carbon (EFS-NPC) was prepared by a simple carbonization and activation process. Owing to the biodegradation and infiltrability of hyphae, this EFS-NPC possessed an ultra-high specific surface area (3342 m²/g), large pore volume (1.84 cm³/g) and abundant micropores and mesopores. The obtained EFS-NPC could effectively adsorb bisphenol A (BPA) with the maximal adsorption capacity of 1249 mg/g and the removal process reached 89.9% of the equilibrium uptake in the first 0.5 h. Besides, the EFS-NPC showed much better removal performance towards 2,4-dichlorophenol (2,4-DCP) and methylene blue (MB) than commercial activated carbons (Norit RO 0.8 and DARCO granular activated carbon). Furthermore, adsorption isotherms, thermodynamics and kinetics researches indicated that the adsorption process of BPA was monolayer, exothermic and spontaneous. This research has given evidence that the low-cost EFS-NPC can serve as a high-efficient adsorbent for removing organic contaminants from water.

A Novel Adsorbent Albite Modified with Cetylpyridinium Chloride for Efficient Removal of Zearalenone

Zearalenone (ZEN) is a non-steroidal estrogenic mycotoxin and constitutes a potential health threat to humans and livestock. This study aimed to explore the potential of albite modified by the cationic surfactant cetylpyridinium chloride (CPC) as ZEN adsorbent. The organoalbite (OA) was characterized by SEM analysis, XRD analysis, FTIR spectroscopy, thermal analysis, and BET gas sorption measurement. In vitro adsorption of ZEN by OA was carried out by simulating the pH conditions of the gastrointestinal tract. The characterization results showed that the surface of OA changed from hydrophilic to hydrophobic after modification. Adsorption kinetic studies showed that ZEN adsorption behavior of OA occurred by chemisorption. The equilibrium adsorption data fitted well with the Langmuir isotherm, indicating that the adsorption process of ZEN by OA was monolayer. The maximum adsorption capacity (q_m) values of OA for ZEN were 10.580 and 9.287 mg/g at pH 7 and pH 3, respectively. In addition, OA had a low desorption rate (about 2%), and co-existing amino acids (i.e., Lys and Met), vitamins (i.e., VB₁ and VE), and minerals (i.e., Fe²⁺ and Ca²⁺) did not affect the removal of ZEN. These results demonstrate that OA could be a promising mycotoxin adsorbent for removing the hydrophobic, weakly polar ZEN.

Enhanced adsorption of steroid estrogens by one-pot synthesized phenyl-modified mesoporous silica: Dependence on phenyl-organosilane precursors and pH condition

In this study, the phenyl-modified mesoporous materials were successfully synthesized using phenyl-organosilanes (trimethoxyphenylsilane and triethoxyphenylsilanea) by one-pot co-condensation method for the removal of estrone (E1), 17β-estradiol (E2), and 17α-ethinyl estradiol (EE2). Both the triethoxyphenylsilane-modified material (20%EtPh-MCM-41) and trimethoxyphenylsilane-modified material (20%MePh-MCM-41) could rapidly achieve equilibrium in 30 min at low adsorbent dosage of 0.025 g L^-1. But the different hydrolysable groups of trimethoxyphenylsilane and triethoxyphenylsilane led to the discrepancies in physicochemical properties of the 20%EtPh-MCM-41 and 20%MePh-MCM-41, and thus affected adsorption performance. The 20%EtPh-MCM-41 exhibited the faster estrogen adsorption rates expressed in pseudo-second-order kinetic constant than the 20%MePh-MCM-41 due to the more hydrophobicity. Conversely, the 20%MePh-MCM-41 had much more estrogen adsorption capacities than the 20%EtPh-MCM-41 because of the more available adsorption sites. The addition of the phenyl-organosilane improved estrogen adsorption by π-π and hydrophobic interactions, and the Langmuir-model-based maximum adsorption amounts could reach 99.02, 83.47, and 53.60 mg g^-1 for EE2, E2, and E1, respectively. But excessive concentration of phenyl-organosilane decreased adsorption capacities due to poor pore structure. Alkaline solution, which induced estrogen deprotonation and negative surface charge of absorbents, inhibited estrogen adsorption by electrostatic repulsion and the decreased hydrophobic interaction, but acidic and neutral solutions, ionic strength, and humic acid did not significantly affect estrogen removal. This work not only showed the high potential of trimethoxyphenylsilane-modified MCM-41 used in water purification for steroid estrogens, but also demonstrated the suitable selection of organosilane precursors was key in producing favorable materials with designed functionality.

Nitrogen-doped porous carbon-based fluorescence sensor for the detection of ZIKV RNA sequences: fluorescence image analysis

Many studies have demonstrated that metal-organic frameworks (MOFs) are universal fluorescence quenchers for DNA/RNA detection. Nevertheless, the structural stability of many MOFs is relatively weak, which limits their practical applications. Thus, it remains a great interest to develop constitutionally stable nano biosensor suitable for application in the complex environment. Herein, a new angle of nitrogen-doped porous carbon (NPC) obtained from MOFs-based precursors by virtue of a simple method was applied as a nano biosensor for the fluorescence detection of Zika virus (ZIKV) RNA sequences. The fluorescence signal capturing was carried out by using a charge-coupled device (CCD)-based imaging system. The NPC could adsorb TAMRA-tagged ZIKV RNA probe (P-DNA) to form P-DNA@NPC complex accompanied by substantial fluorescence quenching. Upon adding the complementary target RNA (T-RNA), the P-DNA could release from NPC by forming a double-stranded hybrid and induce the fluorescence recovery. The P-DNA@NPC complex was valid and reliable for ZIKV RNA sequences assay with a limit of detection (LoD) at 0.23 nM, which is superior to many of the previously reported fluorescent DNA sensors. Moreover, it could distinguish mismatched RNA and was effective in detecting ZIKV RNA sequences spiked in the human saliva sample. We envision that this study would offer an interesting new angle on the potential integrating application of carbon nanomaterials and CCD-based fluorescence imaging platform in the field of nucleic acid assay.

Adsorption of Cd(II) in water by mesoporous ceramic functional nanomaterials

Mesoporous ceramic functional nanomaterials (MCFN) is a self-assembled environmental adsorbent with a monolayer molecular which is widely used in the treatment of industrial wastewater and contaminated soil. This work aimed to study the relationship between the adsorption behaviour of Cd(II) by MCFN and contact time, initial concentration, MCFN dosage, pH, oscillation rate and temperature through a batch adsorption method. The adsorption kinetic and isotherm behaviours were well described by the pseudo-second-order and Langmuir models. The batch characterization technique revealed that MCFN had several oxygen-containing functional groups. Using Langmuir model, the maximum adsorption capacity of MCFN for Cd(II) was 97.09 mg g-1 at pH 6, 25°C, dosage of 0.2 g and contact time of 180 min. Thermodynamic study indicated that the present adsorption process was feasible, spontaneous and exothermic at the temperature range of 25-55°C. The results of this study provide an important enlightenment for Cd removal or preconcentration of porous ceramic nanomaterial adsorbents for environmental applications.

Mechanochemically Synthesised Coal-Based Magnetic Carbon Composites for Removing As(V) and Cd(II) from Aqueous Solutions

The continued decrease in water quality requires new advances in the treatment of wastewater, including the preparation of novel, effective, environmentally friendly, and affordable sorbents of toxic pollutants. We introduce a simple non-conventional mechanochemical synthesis of magnetically responsive materials. Magnetic lignite and magnetic char were prepared by high-energy ball co-milling from either raw Slovak lignite or coal-based char together with a ferrofluid. The products were characterised by X-ray diffraction, electron microscopy, ⁵⁷Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy (XPS), volumetric magnetic susceptibility, and low-temperature nitrogen adsorption, and both magnetic carbons were comparatively tested as potential sorbents of As(V) oxyanions and Cd(II) cations in aqueous solutions. The magnetic char was an excellent sorbent of As(V) oxyanions (Q_m = 19.9 mg/g at pH 3.9), whereas the magnetic lignite was less effective. The different sorption properties towards arsenic anions may have been due to different oxidation states of iron on the surfaces of the two magnetic composites (determined by XPS), although the overall state of iron monitored by Mössbauer spectroscopy was similar for both samples. Both magnetic composites were effective sorbents for removing Cd(II) cations (Q_m (magnetic lignite) = 70.4 mg/g at pH 6.5; Q_m (magnetic char) = 58.8 mg/g at pH 6.8).