The effects of small molecule organic additives on the self-assembly and rheology of betaine wormlike micellar fluids

Cryo-electron tomography study of the evolution of wormlike micelles to saturated networks and perforated vesicles

HYPOTHESIS

The formation of micellar aggregates and the changes in their morphology are crucial for numerous practical applications of surfactants. However, a proper structural characterization of complicated micellar nanostructures remains a challenge. This paper demonstrates the advances of cryo-electron tomography (cryo-ET) in revealing the structural characteristics that accompany the evolution of surfactant aggregates.

EXPERIMENTS

By using cryo-ET in combination with cryo-transmission electron microscopy (cryo-TEM), small-angle neutron scattering (SANS), and rheometry, studies were carried out on a model system composed of zwitterionic and nonionic surfactants. In this system, the molecular packing parameter was increased gradually by increasing the molar fraction of nonionic surfactant.

FINDINGS

A series of structural transformations was observed: linear wormlike micelles (WLMs) → branched WLMs → saturated network of multiconnected WLMs → perforated vesicles (stomatosomes). The transformations occur through an increase in the number of branches at the expense of cylindrical subchains and semispherical endcaps. Exponential distribution of subchains length was confirmed experimentally for multiconnected saturated networks. The stomatosomes were formed when the length of subchains becomes much shorter than the persistence length, causing the three-dimensional (3D) structure to transform into a two-dimensional (2D) membrane. This work identifies the mechanism of the structural changes, which can be further used to design various surfactant self-assemblies.

A Study of the Micellar Formation of N-Alkyl Betaine Ethyl Ester Chlorides Based on the Physicochemical Properties of Their Aqueous Solutions

In this study, a series of four surface-active compounds-N-alkyl betaine ethyl ester chlorides, CnBetC2Cl-were synthesized and characterized in aqueous solutions. As with other alkyl betaines, these amphiphiles can be practically used, for example, as co-surfactants and/or solubility enhancers acting according to hydrotropic or micellar mechanisms, depending on the alkyl chain length in the amine. We focused on the representatives of the medium alkyl chain length (C6-C12) to find the dependence between the alkyl chain length in N-alkyl betaine ethyl ester chlorides and the surface, volumetric, acoustic, and viscometric properties of their solutions. Ethyl esters, the derivatives of amino acids, were chosen to increase functionality and take advantage of possible hydrolysis in solutions at higher pH, which is also a key parameter in biodegradability. The micellization parameters were calculated based on the physicochemical characteristics. We focused our interest on the ester with a dodecyl substituent since we can compare and discuss its properties with some other C12 representatives that are available in literature. Surprisingly, its micellization characteristic is almost temperature-independent in the investigated temperature range, t = (15-45) °C. Particularly interesting are the results of dynamic light scattering (DLS), which show that the changes in physicochemical parameters of the C12 homolog around the CMC are caused by the two types of micelles of different sizes present in solutions.

Alkane-Strengthened Viscoelasticity in Micellar Solutions of Surface-Active Ionic Liquids and Their Potential Application in Enhanced Oil Recovery

Wormlike micelles (WLMs) are highly sensitive to alkanes, resulting in structural destruction and loss of viscosity. Therefore, the study of WLMs against alkanes holds great significant importance. Surface-active ionic liquids have shown increasing promise for different situations for customizing molecular structures with the specialty of flexible functional assembly. In this paper, we found that WLMs constructed from the long-chain fatty acid surface-active ionic liquid (N,N-dimethylbenzylamine-oleic acid, abbreviated as BD-OA) exhibit strengthened viscoelasticity with the introduction of alkanes, expanding the resistance range to alkane damage. Here, the rheological behavior, microstructure, and dissipative particle dynamics (DPD) simulations of BD-OA WLMs were investigated at macro-, micro-, and mesoscopic scales, before (and after) the introduction of alkane. Our findings confirm the structural transformation of the micellar system from WLMs to lamellar micelles with higher viscoelasticity after alkane induction. The rearrangement of the micelle configuration may be attributed to the infiltration of alkane molecules into the fence layer formed by the BD-OA WLMs, leading to an increase in the boundary accumulation parameter and ultimately resulting in the formation of lower curvature lamellar micelles. More importantly, the against alkanes BD-OA WLMs have exhibited excellent in enhanced oil recovery, which has a promise for substituting common oil-displacing agents in tertiary oil recovery processes.

Influence of tail group length, amide functionality and added salt ion identity on the behaviour of betaine surfactants

Hypothesis The behaviour of surfactants in solution and at interfaces is governed by a combination of steric and electrostatic effects experienced by surfactant molecules as they interact with solvent, other species in solution, and each other. It would therefore be anticipated that highly interacting groups would significantly influence surfactant behaviour. The widely used amide functionality has polar H-bond donor/acceptor properties, and therefore its inclusion into a surfactant structure should have a profound effect on surface activity and self-assembly of that surfactant when compared to the equivalent molecule without an amide linker. Further, chaotropic or kosmotropic salt ions that affect water structuring and hydrogen bonding may provide opportunities for further tuning surfactant interactions in such cases. Experiments A library of betaine surfactant with tail lengths n=14-22 both with and without an amidopropyl linker were synthesised to study the effect of the amide functionality on surfactant properties. Characterisation of the molecules interfacial properties were performed using pendant drop tensiometry and their solution state formulation properties were probed using small-angle neutron scattering (SANS) and rheological measurements. Findings Presence of an amidopropyl linker had little effect on aggregation propensity (as evidenced by critical micelle concentration) and aggregate morphology of betaine surfactants, but did increase the Krafft temperature of these surfactants. SANS analysis indicated that aggregate morphology of alkyl betaine surfactants could be influenced by the addition of sodium salts with chaotropic counterions (I- and SCN-), but they were insensitive to more kosmotropic anions (SO42-, F- and Cl-), providing unique and novel solution control methods for this (supposedly salt-insensitive) class of surfactants.

Increasing the aqueous solubility of the anesthetic propofol through wormlike micelle formation

Propofol, a phenol derivative, is commonly employed as an intravenous anesthetic during clinical procedures, formulated as an oil/water emulsion due to its poor solubility in water. The stability limitations associated with emulsions have prompted research efforts towards developing aqueous formulations of propofol. In this work, we investigate the solubility enhancement of propofol in anionic and cationic surfactants. Our findings reveal that the solubility of propofol can increase significantly, up to 100-fold, depending on the nature of the micellar aggregate, as observed for alkylammonium halogenates CnTAB (for n = 12, 14 and 16), contrasting with the lower solubility with SDS. Interestingly, C14TAB and C16TAB demonstrate significantly higher solubility than C12TAB. This was attributed to the formation of wormlike micelles, in which the propofol molecules are positioned between the cationic heads of the surfactant molecules, changing the micellar curvature and the morphology of the aggregate. Therefore, the aromatic molecules in the micellar environment can be partitioned into the micellar cores and their palisades. Regarding C12TAB, the alkyl chain is too short to form wormlike micelles, thus, concentrating propofol molecules mainly into the micellar core, and consequently, leading to their aggregation. Solubility diagrams of propofol were constructed in conjunction with different surfactants. The systems exhibiting viscoelastic behavior, indicative of wormlike micelle formation, were further investigated using rheology. Additionally, the fluorescent properties of propofol enabled the examination of the anesthetic molecule within diverse micellar environments.

Application of Hydrogels and Hydrocarbon-Based Gels in Oil Production Processes and Well Drilling

The use of gels in oil production processes has become a regular practice in oilfield operations and is constantly developing in all oil-producing countries of the world, as evidenced by the growth of publications and patent activity on this topic. Many oil production processes, such as hydraulic fracturing, conformance control, water, and gas shutoff, cannot be imagined without the use of gel technologies. Inorganic, organic, and hybrid gels are used, as well as foams, gel-forming, and gel-dispersed systems. The possibility of a broad control of structural and mechanical properties, thermal stability, and shear resistance by introducing microscale and nanoscale additives made hydrogels and hydrocarbon-based gels indispensable tools for oil engineers.

Molecular Dynamics Simulations on the Adsorbed Monolayers of N-Dodecyl Betaine at the Air-Water Interface

Betaine is a kind of zwitterionic surfactant with both positive and negative charge groups on the polar head, showing good surface activity and aggregation behaviors. The interfacial adsorption, structures and properties of n-dodecyl betaine (NDB) at different surface coverages at the air-water interface are studied through molecular dynamics (MD) simulations. Interactions between the polar heads and water molecules, the distribution of water molecules around polar heads, the tilt angle of the NDB molecule, polar head and tail chain with respect to the surface normal, the conformations and lengths of the tail chain, and the interfacial thickness of the NDB monolayer are analyzed. The change of surface coverage hardly affects the locations and spatial distributions of the water molecules around the polar heads. As more NDB molecules are adsorbed at the air-water interface, the number of hydrogen bonds between polar heads and water molecules slightly decreases, while the lifetimes of hydrogen bonds become larger. With the increase in surface coverage, less gauche defects along the alkyl chain and longer NDB chain are obtained. The thickness of the NDB monolayer also increases. At large surface coverages, tilted angles of the polar head, tail chain and whole NDB molecule show little change with the increase in surface area. Surface coverages can change the tendency of polar heads and the tail chain for the surface normal.

Supramolecular self-assembly of robust, ultra-stable, and high-temperature-resistant viscoelastic worm-like micelles

HYPOTHESIS

Worm-like micelles are susceptible to heating owing to the fast dynamic exchange of molecules between micelles. Inhibition of such exchange could afford robust worm-like micelles, which is expected to largely improve rheology properties at high temperatures.

EXPERIMENTS

A cationic surfactant docosyl(trimethyl)azanium chloride (DCTAC) and a strongly hydrophobic organic counterion 3-hydroxy naphthalene-2-carboxylate (SHNC) were used for the worm-like micelles fabrication. The microstructure was characterized using cryogenic transmission electron microscopy and small-angle neutron scattering, and the interactions between DCTAC and SHNC were characterized using nuclear magnetic resonance spectroscopy. Rheometer was employed to measure the rheological properties of the solution.

FINDINGS

SHNC/DCTAC at the molar ration of 1:2 forms ultra-stable worm-like micelles, whose viscosity remain stable at temperature up to 130 °C. SHNC is found to strongly adsorbs on DCTAC micelle with the orientation on the surface of micelle, keeping the naphthalene backbone entire penetration into the palisade layer while both carboxylic and hydroxyl groups protrude out of the micelle. With temperature increasing, this adsorption further strengthens, resulting in the growth contour length and accompanying the enhancement of rheological properties. One SHNC molecule and two DCTAC molecules are speculated to form a stable complex via multiple interactions including hydrophobic, cationic-π, and π-π interactions, which decreases the dynamic exchange of them between micelles. These findings are helpful to understand surfactant aggregates stability and assist the development of novel stable supramolecular nanostructures. Additionally, the excellent thermal stability of this worm-like micellar fluid makes it a potential high-temperature resistant clean fracturing fluid for deep oil reservoirs.

Mimicking the Natural World with Nanoarchitectonics for Self-Assembled Superstructures

Scientists are often inspired by nature, where naturally occurring morphologies, such as those that resemble animals and plants, can be created in the lab. In this review, we have provided an overview on complex superstructures of animals, plants and some similar shapes from the natural world. We begin this review with a discussion about the formation of various animal-like shapes from small organic molecules and polymers, and then move onto plants and other selected shapes. Literature surveys reveal that most of the polymers studied tend to form micellar structures, with some exceptions. Nevertheless, small organic molecules tend to form not only micellar structures but also other animal shapes such as worms and caterpillars. These superstructures tend to have high surface areas and variable surface morphology, making them very useful material for applications in various field such as catalysis, solar cells, and biomedicine, amongst others.

Modeling Micellar Growth and Branching in Mixtures of Zwitterionic with Ionic Surfactants

Zwitterionic surfactants are widely applied as drag-reducing or thickening agents because their aggregation patterns may drastically change in response to variations of the system composition or external stimuli, which provides controllable viscoelasticity. For predicting aggregation behavior of surfactant mixtures, classical molecular thermodynamic models have been widely used. Particularly, the results of modeling have been reported for zwitterionic/ionic surfactant mixtures. However, for solutions containing a zwitterionic surfactant, no molecular thermodynamic model has been proposed for a micellar branch. In this work we extend the classical molecular thermodynamic aggregation model to describe aggregation in the aqueous mixtures that contain a zwitterionic and an ionic surfactant. We derive analytical expressions (1) for the contribution of dipoles to the electrostatic term of the standard free energy of aggregation into micellar branches and (2) for the dipolar contribution to the persistence length of wormlike micelles. The dependence of micellar branching on the surfactant concentration is taken into account by including the population of micellar branches in the material balance equations. This model is applied to predict aggregation equilibrium in aqueous salt solutions of betaine (oleoylamidopropyl-N,N-dimethylbetaine) mixed with sodium dodecyl sulfate (SDS) and the longer tail sodium n-alkyl sulfates. We discuss the predicted properties of the aggregates and micellar networks and compare our predictions with available experimental data.

Wormlike micelles of CTAB with phenols and with the corresponding phenolate derivatives - When hydrophobicity and charge drive the coacervation

HYPOTHESIS

Hydrophobicity and the presence or absence of charge in phenol derivatives are relevant on the rheology and phase behavior when they are assembled with a cationic surfactant, forming wormlike micelles. The incorporation of phenols with a greater number of rings into the micellar palisade is entropically favored, but a solubilization limit or coacervation are two paths followed by the solutions, depending on the electrical nature of the aromatic co-solutes.

EXPERIMENTS

The investigations were carried out with systems formed by a fixed concentration of hexadecyltrimethylammonium bromide (CTAB) and increasing concentrations of neutral phenols (1-naphthol, 2-naphthol, 2,3-dihydroxynaphthalene and R and S-binol) and with their corresponding phenolate derivatives. The monophasic limits of the systems were established, as well as their linear and non-linear rheology. The structural investigation of the coacervates formed with the phenolates were done using SAXS and Cryo-TEM.

FINDINGS

The zero-shear viscosity of the solutions reaches maxima values close to the solubility limit of the aromatics, which depends on the numbers of rings and hydroxyl groups (position and number). However, when the correspondent ionized phenols were investigated, beyond the maxima values for the zero-shear viscosity, liquid-liquid biphasic systems are formed, in which the upper phase contains a coacervate, associated with branched wormlike micelles. However, when the ratio between phenolate and CTAB is around 3:1 the coacervate evolves to a lamellar structure.

Applicability Assessment of Viscoelastic Surfactants and Synthetic Polymers as a Base of Hydraulic Fracturing Fluids

Hydraulic fracturing (HF) is currently the most widespread and effective method of oil production stimulation. The most commonly used fracturing fluid is crosslinked guar gels. However, when using these systems, problems such as clogging of the pore space, cracking, and proppant packing with the remains of the undestroyed polymer arise. Therefore, the efficiency of the hydraulic fracturing process decreases. In this work, compositions based on viscoelastic surfactants (VES) and synthetic polymers (SP) were considered as alternatives capable of minimizing these disadvantages. Most often, the possibility of using a composition as a fracturing fluid is evaluated using rotational viscometry. However, rotational viscometry is not capable of fully assessing the structural and mechanical properties of fracturing fluid. This leads to a reduced spread of systems based on VES and SP. This paper proposes an integrated approach to assessing the effectiveness of a water-based fracturing fluid. The proposed comprehensive approach includes an assessment of the main characteristics of water-based fracturing fluids, including an analysis of their structural and mechanical properties, which is based on a combination of rotational and oscillatory rheology and a comparative analysis of methods for studying the influence of fluids on the reservoir rock. The use of the developed approach to assess the technological properties of fracturing fluids makes it possible to demonstrate the potential applicability of new, unconventional fracturing fluids such as systems based on VES and SP.

Spontaneous surface adsorption of aqueous graphene oxide by synergy with surfactants

The spontaneous adsorption of graphene oxide (GO) sheets at the air-water interface is explored using X-ray reflectivity (XRR) measurements. As a pure aqueous dispersion, GO sheets do not spontaneously adsorb at the air-water interface due to their high negative surface potential (-60 mV) and hydrophilic functionality. However, when incorporated with surfactant molecules at optimal ratios and loadings, GO sheets can spontaneously be driven to the surface. It is hypothesised that surfactant molecules experience favourable attractive interactions with the surfaces of GO sheets, resulting in co-assembly that serves to render the sheets surface active. The GO/surfactant composites then collectively adsorb at the air-water interface, with XRR analysis suggesting an interfacial structure comprising surfactant tailgroups in air and GO/surfactant headgroups in water for a combined thickness of 30-40 Å, depending on the surfactant used. Addition of too much surfactant appears to inhibit GO surface adsorption by saturating the interface, and low loadings of GO/surfactant composites (even at optimal ratios) do not show significant adsorption indicating a partitioning effect. Lastly, surfactant chemistry is also a key factor dictating adsorption capacity of GO. The zwitterionic surfactant oleyl amidopropyl betaine causes marked increases in GO surface activity even at very low concentrations (≤0.2 mM), whereas non-ionic surfactants such as Triton X-100 and hexaethyleneglycol monododecyl ether require higher concentrations (ca. 1 mM) in order to impart spontaneous adsorption of the sheets. Anionic surfactants do not enhance GO surface activity presumably due to like-charge repulsions that prevent co-assembly. This work provides useful insight into the synergy between GO sheets and molecular amphiphiles in aqueous systems for enhancing the surface activity of GO, and can be used to inform system formulation for developing water-friendly, surface active composites based around atomically thin materials.

Novel Trends in the Development of Surfactant-Based Hydraulic Fracturing Fluids: A Review

Viscoelastic surfactants (VES) are amphiphilic molecules which self-assemble into long polymer-like aggregates-wormlike micelles. Such micellar chains form an entangled network, imparting high viscosity and viscoelasticity to aqueous solutions. VES are currently attracting great attention as the main components of clean hydraulic fracturing fluids used for enhanced oil recovery (EOR). Fracturing fluids consist of proppant particles suspended in a viscoelastic medium. They are pumped into a wellbore under high pressure to create fractures, through which the oil can flow into the well. Polymer gels have been used most often for fracturing operations; however, VES solutions are advantageous as they usually require no breakers other than reservoir hydrocarbons to be cleaned from the well. Many attempts have recently been made to improve the viscoelastic properties, temperature, and salt resistance of VES fluids to make them a cost-effective alternative to polymer gels. This review aims at describing the novel concepts and advancements in the fundamental science of VES-based fracturing fluids reported in the last few years, which have not yet been widely industrially implemented, but are significant for prospective future applications. Recent achievements, reviewed in this paper, include the use of oligomeric surfactants, surfactant mixtures, hybrid nanoparticle/VES, or polymer/VES fluids. The advantages and limitations of the different VES fluids are discussed. The fundamental reasons for the different ways of improvement of VES performance for fracturing are described.

Heads or tails? The synthesis, self-assembly, properties and uses of betaine and betaine-like surfactants

Betaines are a key class of zwitterionic surfactant that exhibit particularly favorable properties, making them indispensable in modern formulation. Due to their composition, betaines are readily biodegradable, mild on the skin and exhibit some antimicrobial activity. Vital to their function, these surfactants self-assemble into diverse micellar geometries, some of which contribute to increased solution viscosity, and their surface activity results in strong detergency and foaming. As such, their behavior has been exploited in various applications from personal care (including shampoos and liquid soaps) to specific industrial fields (such as enhanced oil recovery). This review aims to inform the reader of the diverse range of different betaine and betaine-like surfactants that have been actively researched over the past three decades. Synthesis as well as both chemical and physical characterization of betaine surfactants are discussed, including small-angle scattering studies that indicate self-assembly structures and rheological data that demonstrates texture and flow. Stimulus responsive systems and exotic betaine analogs with enhanced functionality are also covered. Crucially, the connection between surfactant molecular architecture and function are highlighted, exemplifying precisely why zwitterionic betaine and related surfactants are so uniquely functional.

Deducing the Relation between Viscosity and Oil-Induced Structural Changes of Viscoelastic Surfactants Using a Kinetic Approach

The present study relates viscosity reduction with time of a wormlike micellar solution to the micellar transitions that occur with time in the presence of three n-alkanes, namely, n-decane, n-dodecane, and n-hexadecane. Steady-shear rheology and small-angle X-ray scattering were used to deduce the relationship. The effect of n-alkane concentration was tested only with n-decane. There were at most three stages of viscosity reduction, which appeared in the following order: (i) the rising viscosity stage, (ii) the fast viscosity reduction stage, and (iii) the low-viscosity stage. The stages and rates of viscosity transition depended on the type of micelles present and the degree of micelle entanglement. Moreover, the rate of transition increased when the n-alkane concentration was increased and when the n-alkane molecular mass was reduced. n-Hexadecane induced only the first two stages of transition at a slower rate compared to the other oils.

Higher Salt Hydrophobicity Lengthens Ionic Wormlike Micelles and Stabilizes Them upon Heating

Tuning the rheological properties of surfactant solutions by charge screening is a convenient formulation tool in cosmetic, household, oil recovery, drag-reduction, and thickening applications. Surfactants self-assemble in water, and upon charge screening and core shielding, they grow into long wormlike micelles (WLMs). These are valuable model systems for soft matter physics, and the most explored formulation is hexadecyl-trimethylammonium bromide (CTAB) and sodium salicylate (NaSal). Replacing NaSal with aromatic salts of altered hydrophobicity results in different penetration of the additive in the CTAB micellar core. This altered penetration depth will determine the anisotropic micellar growth that tailors the viscoelastic response. Sodium 4-methylsalicylate (mNaSal) is a higher hydrophobicity alternative to NaSal, requiring less additive to induce strong changes in the viscoelastic properties. Herein, we provide a comparative study of the mNaSal/CTAB system with the reference NaSal/CTAB over a range of temperatures and salt concentrations. The findings from the well-known NaSal/CTAB pair are transferred to the mNaSal/CTAB system, revealing the origins of the WLM solution's viscoelastic properties by discerning contributions from charge screening and micellar core shielding upon small differences in hydrophobicity.

In Situ Nanostructural Analysis of Concentrated Wormlike Micellar Fluids Comprising Sodium Laureth Sulfate and Cocamidopropyl Betaine Using Small-Angle Neutron Scattering

Concentrated wormlike micellar fluids form the basis for a vast array of formulated products, from liquid soaps and shampoos to drag reduction and drilling fluids. Typically, these systems are analyzed using bulk rheological measurements to determine their flow properties and cryo-microscopy to detect their nanostructure. Small-angle neutron scattering provides an opportunity to directly and nonperturbatively analyze nanostructure in situ but is complicated for concentrated systems by correlations from interparticle volume exclusion. Here, we use small-angle and ultra-small-angle neutron scattering to probe directly for the first time the nanostructure of concentrated wormlike micellar fluids composed of the widely used surfactant pair sodium laureth sulfate and cocamidopropyl betaine in aqueous electrolytes. Obtained data are analyzed using different approaches to determine scattering contributions from the wormlike particles themselves and interactions between them. It is found that approximating worms as locally rigid cylinders offers some insight into their aggregation dimensions at short length scales, and both volume exclusion and screened Coulombic interaction potentials describe interactions reasonably well. Using the semi-empirical polymer reference interaction site model (PRISM) gives excellent agreement with observed scattering, and physical insight obtained using this approach is discussed in detail. A drawback of this method is the significant complexity in coding the model in order to fit data, so to facilitate this for future researchers, we provide with this paper a fully operational, open-source code to utilize this model.

Effect of Added Tetraalkylammonium Counterions on the Dilational Rheological Behaviors of N-Cocoyl Glycinate

Ion specific effect, which is also known as Hofmeister effect, has been reported in numerous systems including ionic surfactant aggregates. Acyl amino acid surfactants have attracted growing attentions in the field of novel surfactants research due to their environmentally benign characteristics. The objective of this study was to investigate the effect of different salts containing NH₄⁺ and tetraalkylammonium (TAA⁺), where alkyl = methyl (TMA⁺), ethyl (TEA⁺), and propyl (TPA⁺), cations on the dilational rheological properties of interfacial film are stabilized by potassium N-cocoyl glycinate (KCGl). The interfacial behaviors were studied using oscillating drop shape analysis method. The interfacial tensions (IFTs) and dilational rheological parameters results illustrate that KCGl in the presence of salts has better interfacial activity and stronger intermolecular interaction, indicating that added cations contribute to denser molecular packing at oil-water interface. Ion specific effects were observed in the system. Among the cations, KCGl shows highest dilational modulus in the presence of NH₄⁺. The overall interaction between cations and headgroups of KCGl decreases in the sequence NH₄⁺ >TMA⁺ >TEA⁺ ≈TPA⁺, which follows Hofmeister series. The increasing hydrophobicity of TAA⁺ prevents the interaction between cations and KCGl's headgroup, and therefore prevent amphiphiles from packing closely at interface. The results present a theoretical origin for useful application of KCGl in cosmetics, petroleum and daily chemical industries.

Highly Water-Preserving Zwitterionic Betaine-Incorporated Collagen Sponges With Anti-oxidation and Anti-inflammation for Wound Regeneration

A core problem in wound healing – with both fundamental and technological significance – concerns the rational design of bioactive and moist microenvironments. Here, we design a new class of zwitterionic betaine-incorporated collagen sponges (BET@COL) with integrated anti-oxidation and anti-inflammatory properties for promoting wound healing in a full-thickness wound model. The presence of zwitterionic betaine in a 3D network structure of collagen enables tightly bound and locked water molecules inside sponges via ionic solvation and confinement effect, while the integration of this amino acid also empowers the sponge with anti-oxidation and anti-inflammatory functions. In vitro results demonstrated that BET@COL collagen sponges strongly preserved water content up to 33.78 ± 0.78% at the 80th min at 37°C (only 0.44 ± 0.18% in control), and also exhibited high cell biocompatibility. Further, BET@COL collagen sponges with different betaine contents were applied to a full-thickness cutaneous wound model in mice, followed by a systematical evaluation and comparison of the effect of preserved water on wound healing efficiency in vivo. The optimal BET@COL collagen sponges were able to maintain high water content (e.g., moist microenvironment), suppress oxidative stress, improve anti-inflammation, all of which impose synergetic healing effects to promote wound closure, granulation formation, re-epithelization, collagen deposition and angiogenesis. This work demonstrates a new material as a promising candidate for wound dressing.

Spontaneous Self-Assembly of Thermoresponsive Vesicles Using a Zwitterionic and an Anionic Surfactant

Spontaneous formation of vesicles from the self-assembly of two specific surfactants, one zwitterionic (oleyl amidopropyl betaine, OAPB) and the other anionic (Aerosol-OT, AOT), is explored in water using small-angle scattering techniques. Two factors were found to be critical in the formation of vesicles: surfactant ratio, as AOT concentrations less than equimolar with OAPB result in cylindrical micelles or mixtures of micellar structures, and salt concentration, whereby increasing the amount of NaCl promotes vesicle formation by reducing headgroup repulsions. Small-angle neutron scattering measurements reveal that the vesicles are approximately 30-40 nm in diameter, depending on sample composition. Small-angle X-ray scattering measurements suggest preferential partitioning of OAPB molecules on the vesicle inner layer to support vesicular packing. Heating the vesicles to physiological temperature (37 °C) causes them to collapse into smaller ellipsoidal micelles (2-3 nm), with higher salt concentrations (≥10 mM) inhibiting this transition. These aggregates could serve as responsive carriers for loading or unloading of aqueous cargoes such as drugs and pharmaceuticals, with temperature changes serving as a simple release/uptake mechanism.

Predicting the effect of additives on wormlike micelle and liquid crystal formation and rheology with phase inversion phenomena

HYPOTHESIS

Surfactant-based viscoelastic fluids are used in consumer products such as body wash, cosmetics, and in hydraulic fracturing fluids to suspend proppant, among others. The solubilization of oil within these fluids changes the curvature of the surfactant and their nanostructure and rheological properties. The curvature-based hydrophilic-lipophilic-difference + net-average-curvature (HLD-NAC) framework may be able to quantify curvature changes and predict the formulation conditions required to obtain viscoelasticity.

EXPERIMENTS

Phase inversion experiments were conducted for combinations of commercial-grade C₈, C₁₀ and C₁₂ tetrapropylene glycol ether sulfate (extended) surfactant and sodium dihexyl sulfosuccinate with oil to obtain the HLD-NAC parameters. Wormlike micelles (WLMs) and liquid crystals (LCs) were then formulated and characterized. The transition from spherical micelles to WLMs/LCs at different oil contents was identified and compared with phase transitions predicted via the HLD-NAC model.

FINDINGS

The spherical micelle to branched WLM/LC transition in surfactant + oil systems coincided with the water-continuous (Type I) to bicontinuous (Type III) microemulsion phase transition predicted with the HLD-NAC model. Using this finding, the transition of commercial-grade sodium laureth sulfate (SLES) micelles to viscoelastic LCs containing various oils was predicted using the HLD-NAC. The HLD-NAC also predicted the presence of a secondary peak in viscosity obtained in "salt curves" experiments associated with branched WLMs and LCs.

Effect of residual chemicals on wormlike micelles assembled from a C22-tailed cationic surfactant

HYPOTHESIS

Ultra-long-chain surfactants, particularly C₂₂-tailed ones, have attracted considerable attention because of their ease of self-assembly into wormlike micelles (WLMs). Commercial C₂₂-tailed surfactants often contain non-negligible amounts of chemical residues introduced during their production. Since the noncovalent driving force of wormlike self-assembly can be greatly affected by the composition, we hypothesized that the residual chemicals could play a significant role in tuning the micelle microstructure and macroscopic properties of the surfactants.

EXPERIMENTS

To confirm this hypothesis, a highly pure (>99%) C₂₂-tailed cationic surfactant, N-erucylamidopropyl-N,N,N-trimethylammonium iodide (EDAI) was synthesized, and various amounts of corresponding reactants (iodomethane or N-erucamidopropyl-N,N-dimethylamine) or solvents (acetone) commonly used in surfactant synthesis were introduced as residues. The impact of each individual residue on the macroscopic appearances, rheological properties, and micelle morphology of the surfactant solution were investigated.

FINDINGS

Increasing the residue fraction in the EDAI solution resulted in an initial increase, followed by a dramatic drop in solution viscosity. This behavior was described in terms of micellar structural transformations based on analysis of cryo-TEM observations and surface tension measurements. These findings are of crucial importance in understanding the sophisticated behaviors of WLMs and will benefit the industrial preparation of ultra-long-chain surfactants for commercial use.