Multifunctional negatively-charged poly (ether sulfone) nanofibrous membrane for water remediation

Recent progress on electrospun nanofibrous polymer membranes for water and air purification: A review

Developing new polymer membranes with excellent thermal, mechanical, and chemical stability has shown great potential for various environmental remediation applications such as wastewater treatment and air filtration. Polymer membranes have been widely investigated over the past years and utilized to overcome severe ecological issues. Membrane-based technologies play a critical role in water purification and air filtration with the ability to act efficiently and sustainably. Electrospun nanofiber membranes have displayed excellent performance in removing various contaminants from water, such as bacteria, dyes, heavy metals, and oil. These nanofibrous membranes have shown good potential to filter the air from tiny particles, volatile organic compounds, and toxic gases. The performance of polymer membranes can be enhanced by fine-tuning polymer structure, varying surface properties, and strengthening overall membrane porosity. In this review, we discuss the involvement of electrospun nanofibrous membranes in different environmental remediation applications. It further reviews the recent progress of polymer membrane development by utilizing nanoparticles and naturally occurring polymers.

Review of the Recent Advances in Electrospun Nanofibers Applications in Water Purification

Recently, nanofibers have come to be considered one of the sustainable routes with enormous applicability in different fields, such as wastewater treatment. Electrospun nanofibers can be fabricated from various materials, such as synthetic and natural polymers, and contribute to the synthesis of novel nanomaterials and nanocomposites. Therefore, they have promising properties, such as an interconnected porous structure, light weight, high porosity, and large surface area, and are easily modified with other polymeric materials or nanomaterials to enhance their suitability for specific applications. As such, this review surveys recent progress made in the use of electrospun nanofibers to purify polluted water, wherein the distinctive characteristics of this type of nanofiber are essential when using them to remove organic and inorganic pollutants from wastewater, as well as for oil/water (O/W) separation.

Characterization and Treatment Technologies Applied for Produced Water in Qatar

Qatar is one of the major natural gas (NG) producing countries, which has the world’s third-largest NG reserves besides the largest supplier of liquefied natural gas (LNG). Since the produced water (PW) generated in the oil and gas industry is considered as the largest waste stream, cost-effective PW management becomes fundamentally essential. The oil/gas industries in Qatar produce large amounts of PW daily, hence the key challenges facing these industries reducing the volume of PW injected in disposal wells by a level of 50% for ensuring the long-term sustainability of the reservoir. Moreover, it is important to study the characteristics of PW to determine the appropriate method to treat it and then use it for various applications such as irrigation, or dispose of it without harming the environment. This review paper targets to highlight the generation of PW in Qatar, as well as discuss the characteristics of chemical, physical, and biological treatment techniques in detail. These processes and methods discussed are not only applied by Qatari companies, but also by other companies associated or in collaboration with those in Qatar. Finally, case studies from different companies in Qatar and the challenges of treating the PW are discussed. From the different studies analyzed, various techniques as well as sequencing of different techniques were noted to be employed for the effective treatment of PW.

Multi-functional rhodamine-based chitosan hydrogels as colorimetric Hg2+ adsorbents and pH-triggered biosensors

HYPOTHESIS

Water contamination from heavy metal ions is a major global environmental concern. Adsorbents based on biomaterials have been demonstrated to possess remarkable removal efficiency for metal ions, but the adsorption model of biosorbents is not clear and much efforts should be devoted to study the adsorption behaviors and understand the adsorption mechanism.

EXPERIMENTS

The multifunctional rhodamine-modified chitosan (RMC) hydrogel for Hg²⁺ adsorption with fluorescent turn-ON properties was fabricated through grafting the rhodamine-modified poly (ethylene glycol) benzaldehyde (RM-PEG) onto the hydrogel network serving as the fluorescence/colorimetric sensing receptor. The adsorption behaviors and colorimetric sensing mechanism of RMC hydrogel towards Hg²⁺ were investigated in detail.

FINDINGS

RMC hydrogel can remove more than 96.5% of Hg²⁺ from aqueous solution with significant fluorescence response and colorimetric change. The high adsorption selectivity and colorimetric sensing mechanism of RMC hydrogel towards Hg²⁺ can be explained by the hard and soft acid/base (HSAB) theory. The O atom in hydroxyl and carbonyl groups together with the N atom in amine/imine groups of RMC hydrogel play a vital role in the adsorption of Hg²⁺, while the colorimetric response and fluorescence enhancement of the hydrogel after adsorption are attributed to the specific spiro-lactam structure of rhodamine moieties. The adsorption isotherms and kinetics were investigated and well described by Freundlich isotherm and pseudo-second-order kinetic model. Furthermore, RM-PEG showed low cytotoxicity towards mouse embryonic fibroblast cells and RMC hydrogel can be used as a fluorescent pH indicator from 4.2 to 7.4, demonstrating the potential applications of RMC hydrogel in biological diagnosis.

Improving the Performance of Composite Hollow Fiber Membranes with Magnetic Field Generated Convection Application on pH Correction

The membranes and membrane processes have succeeded in the transition from major technological and biomedical applications to domestic applications: water recycling in washing machines, recycling of used cooking oil, recovery of gasoline vapors in the pumping stations or enrichment of air with oxygen. In this paper, the neutralization of condensation water and the retention of aluminum from thermal power plants is studied using ethylene propylene diene monomer sulfonated (EPDM-S) membranes containing magnetic particles impregnated in a microporous propylene hollow fiber (I-PPM) matrix. The obtained membranes were characterized from the morphological and structural points of view, using scanning electron microscopy (SEM), high resolution SEM (HR-SEM), energy dispersive spectroscopy analysis (EDAX) and thermal gravimetric analyzer. The process performances (flow, selectivity) were studied using a variable magnetic field generated by electric coils. The results show the possibility of correcting the pH and removing aluminum ions from the condensation water of heating plants, during a winter period, without the intervention of any operator for the maintenance of the process. The pH was raised from an acidic one (2–4), to a slightly basic one (8–8.5), and the concentration of aluminum ions was lowered to the level allowed for discharge. Magnetic convection of the permeation module improves the pH correction process, but especially prevents the deposition of aluminum hydroxide on hollow fibers membranes.

Recuperative Amino Acids Separation through Cellulose Derivative Membranes with Microporous Polypropylene Fiber Matrix

The separation, concentration and transport of the amino acids through membranes have been continuously developed due to the multitude of interest amino acids of interest and the sources from which they must be recovered. At the same time, the types of membranes used in the sepa-ration of the amino acids are the most diverse: liquids, ion exchangers, inorganic, polymeric or composites. This paper addresses the recuperative separation of three amino acids (alanine, phe-nylalanine, and methionine) using membranes from cellulosic derivatives in polypropylene ma-trix. The microfiltration membranes (polypropylene hollow fibers) were impregnated with solu-tions of some cellulosic derivatives: cellulose acetate, 2-hydroxyethyl-cellulose, methyl 2-hydroxyethyl-celluloseand sodium carboxymethyl-cellulose. The obtained membranes were characterized in terms of the separation performance of the amino acids considered (retention, flux, and selectivity) and from a morphological and structural point of view: scanning electron microscopy (SEM), high resolution SEM (HR-SEM), Fourier transform infrared spectroscopy (FT-IR), energy dispersive spectroscopy (EDS) and thermal gravimetric analyzer (TGA). The re-sults obtained show that phenylalanine has the highest fluxes through all four types of mem-branes, followed by methionine and alanine. Of the four kinds of membrane, the most suitable for recuperative separation of the considered amino acids are those based on cellulose acetate and methyl 2-hydroxyethyl-cellulose.

Development of Polyvinylidene Fluoride Membrane via Assembly of Tannic Acid and Polyvinylpyrrolidone for Filtration of Oil/Water Emulsion

Wastewater containing oil/water emulsion has a serious ecological impact and threatens human health. The impact worsens as its volume increases. Oil/water emulsion needs to be treated before it is discharged or reused again for processing. A membrane-based process is considered attractive in effectively treating oil/water emulsion, but progress has been dampened by the membrane fouling issue. The objective of this study is to develop polyvinylidene fluoride (PVDF) membranes customized for oil/water emulsion separation by incorporating assembly of tannic acid (TA) and polyvinylpyrrolidone (PVP) in the polymer matrix. The results show that the assembly of TA/PVP complexation was achieved as observed from the change in colour during the phase inversion and as also proven from the characterization analyses. Incorporation of the TA/PVP assembly leads to enhanced surface hydrophilicity by lowering the contact angle from 82° to 47°. In situ assembly of the TA/PVP complex also leads to enhanced clean water permeability by a factor of four as a result of enhanced mean flow pore size from 0.2 to 0.9 µm. Owing to enhanced surface chemistry and structural advantages, the optimum hydrophilic PVDF/TA/PVP membrane poses permeability of 540.18 L/(m² h bar) for oil/water emulsion filtration, three times higher than the pristine PVDF membrane used as the reference.

Multifunctional membranes with super-wetting characteristics for oil-water separation and removal of hazardous environmental pollutants from water: A review

Over the past few years, oil-water separation techniques have been widely researched due to influences of oil pollution. The oil pollution is significantly increasing day-by-day because of ever-increasing usage of oil in daily routine of humans and industrial activities. The separation of water from oil-water emulsions/mixtures through membrane technology has provided absolute necessary qualities such as low cost, eco-friendly, easy-operation and energy efficient. To build up the filter membranes with special super-wettability properties and bearing excellent multifunctional applications is highly attractive research area in current decade. However, evolution of membrane technology suffered many deficiencies including severe fouling, short-standing against high flow speed, surface wettability disorders, non-reusable and limited application. In this review article, we outline the recent advances in membrane technology with respect to special super-wettability properties, enhanced characteristics for purpose to serve oil-water separation, and more specifically its multifunctional applications. Therefore, this study is made for membranes having other than applications, in addition to oil-water separation. Further, the wetting phenomenon of these multifunctional membranes is addressed and highlighted the brief overview of surface wetting types including Superhydrophobic-Superoleophilic membranes, Superhydrophilic-Superoleophobic membranes, and Superhydrophilic-underwater Superoleophobic membranes. Moreover, relative fabrication procedures and multifunctional applications of developed multifunctional super-wetting membranes are also discussed along with wetting behavior. Finally, the current developments and achievements for oil-water separation multifunctional super-wetting membranes are concluded. Besides, it also explores the future challenges and obstacles associated to these membranes. Hence, this article provides brief overview of advancement of oil-water separation based multifunctional super-wetting membranes and ended with new thoughts of further modification/enhancement.

A self-cleaning zwitterionic nanofibrous membrane for highly efficient oil-in-water separation

The oil and bacteria adhesion during membrane separation process brings great challenges to the operation costs and membrane service life. Meantime, the strong chemical corrosion in sewage seriously limits the durability of membrane as well. Herein, a facile strategy is developed for fabricating highly stable and efficient zwitterionic nanofibrous membrane (NFM) with self-cleaning feature via the combination of in-situ cross-linking of poly (sulfobetaine methacrylate) (PSBMA) and electrospun poly (ether sulfone) (PES) nanofibers. Owing to the introduction of zwitterionic functional groups, the PSBMA/PES NFM exhibits superior antifouling ability (over 3 cycles of crude oil fouling/self-cleaning and up to 7 days of bacteria adhesion/repelling tests). Moreover, the membrane also presents remarkable chemical stability in acidic, alkaline and salty environments; and exhibits excellent separation performance for both layered oil/water mixture and oil-in-water emulsion as well. Furthermore, the membrane is capable to remove bacteria during the continuous oil/water mixture separation. Overall, the proposed strategy provides a new perspective into developing long-term antifouling membrane materials for complicated oily wastewater remediation in various corrosive environments.

Simultaneous Adsorption of Malachite Green and Methylene Blue Dyes in a Fixed-Bed Column Using Poly(Acrylonitrile-Co-Acrylic Acid) Modified with Thiourea

Proper remediation of aquatic environments contaminated by toxic organic dyes has become a research focus globally for environmental and chemical engineers. This study evaluates the adsorption potential of a polymer-based adsorbent, thiourea-modified poly(acrylonitrile-co-acrylic acid) (T-PAA) adsorbent, for the simultaneous uptake of malachite green (MG) and methylene blue (MB) dye ions from binary system in a continuous flow adsorption column. The influence of inlet dye concentrations, pH, flow rate, and adsorbent bed depth on adsorption process were investigated, and the breakthrough curves obtained experimentally. Results revealed that the sorption capacity of the T-PAA for MG and MB increase at high pH, concentration and bed-depth. Thomas, Bohart-Adams, and Yoon-Nelson models constants were calculated to describe MG and MB adsorption. It was found that the three dynamic models perfectly simulate the adsorption rate and behavior of cationic dyes entrapment. Finally, T-PAA adsorbent demonstrated good cyclic stability. It can be regenerated seven times (or cycles) with no significant loss in adsorption potential. Overall, the excellent sorption capacity and multiple usage make T-PAA polymer an attractive adsorbent materials for treatment of multicomponent dye bearing effluent in a fixed-bed column system.

Free-standing SiO2/TiO2–MoS2 composite nanofibrous membranes as nanoadsorbents for efficient Pb(ii) removal

The practical utility of a hybrid material based on flexible free-standing ceramic nanofibers functionalized with MoS₂ for heavy metal removal.

Multiscale-structured superhydrophobic/superoleophilic SiO2 composite poly(ether sulfone) membranes with high efficiency and flux for water-in-oil emulsions separation under harsh conditions

Multiscale-structured SiO₂ composite poly(ether sulfone) membranes (MSiCPESMs) are facilely prepared via the methods of nonsolvent induced phase separation and sol–gel.

Functionalized Poly(arylene ether nitrile) Porous Membrane with High Pb(II) Adsorption Performance

Porous materials with high specific surface area possess a broad application prospect in the treatment of wastewater. In this work, sulfonated poly(arylene ether nitrile) (SPEN) functionalized with a carboxylic acid group was successfully synthesized, which was subsequently transformed into SPEN porous membranes with cetyltrimethyl ammonium bromide (CTAB) as pore-forming agents to study the adsorption performance for lead ions in aqueous solution. Then, experiments were conducted to investigate the effect of pH, contact time and initial solution concentration on the adsorption performance of porous membranes, and the adsorption capacities of porous membranes with different content (0, 5 and 15 wt %) of CTAB were 183.60, 161.73 and 127.43 mg/g, respectively, which manifested that the adsorption capacity decreased with the increase of CTAB. The adsorption capacities of porous membranes increased with the increase of the initial concentration of lead ions, and the maximum reached was 246.96 mg/g. The simulation of adsorption kinetics revealed that the adsorption was accorded with the pseudo-second-order kinetic model and Langmuir equation, indicating that the adsorption process followed Langmuir monolayer adsorption. Thermogravimetric analysis demonstrated that the porous membranes had excellent thermodynamic properties both before and after adsorption. In addition, the change of adsorption peak in the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) spectrum indicated that the absorption performance of porous membranes for lead ions benefited from the chelation between lead ions and the carboxylic acid group on SPEN. Moreover, the porous membranes maintained excellent adsorption properties after circulating five times under the conditions of acidic or alkaline, and the cycle regeneration effect was outstanding.