Hybrid nano-composites for the consolidation of earthen masonry

Impact of soil density on biomineralization using EICP and MICP techniques for earthen sites consolidation

Enzyme-induced calcium carbonate precipitation (EICP) and microbially-induced calcium carbonate precipitation (MICP) techniques represent emerging trends in soil stabilization. However, the impact of soil density on biomineralization, particularly in historical earthen sites, remains unclear. This study compares the consolidation effects of EICP and MICP on cylindrical samples (10 cm × 5 cm) with three densities (1.5 g/cm3, 1.6 g/cm3, and 1.7 g/cm3) derived from the soil near the UNESCO World Cultural Heritage Site of Suoyang Ancient City, Gansu Province, China. Results showed that calcium carbonate production increased across all densities through bio-cementation, with higher densities producing more calcium carbonate. MICP-treated specimens exhibited larger increases in calcium carbonate production compared to those treated with EICP. Specimens with a density of 1.7 g/cm³ showed a wave velocity increase of 3.26% (EICP) and 7.13% (MICP), and an unconfined compressive strength increase of 8% (EICP) and 26% (MICP). These strength increases correlated with the generation of calcium carbonate. The findings suggest that biomineralization can be effectively utilized for in situ consolidation of earthen sites, emphasizing the importance of considering soil density in biologically-based conservation technologies. Furthermore, MICP shows potential advantages over EICP in providing stronger, compatible and more sustainable soil reinforcement.

Tuning Local Order in Starch Nanoparticles Exploiting Nonsolvency with "Green" Solvents

Starch is a renewable biopolymer that can be sourced from agricultural waste and used to produce nanoparticles (SNPs). In particular, amorphous SNPs have potential application in numerous fields, including the consolidation of weakened paintings in the cultural heritage preservation. Starch dissolution followed by nanoprecipitation in nonsolvents is an advantageous synthetic route, but new methodologies are needed to feasibly control the physicochemical properties of the SNPs. Here, we explored nanoprecipitation by nonsolvency using a set of "green" solvents to obtain amorphous SNPs, rather than starch nanocrystals already reported in the literature. The effect of the nonsolvent on the ordering of polymer chains in the obtained SNPs was studied. The recovery of local order (e.g., isolated V-type helices) after dissolution was shown to depend on the type of solvents used in the dissolution and precipitation steps, while long-range order (extended arrays of helices) is lost. Aqueous dispersions of the SNPs provided effective consolidation of powdery painted layers, showing that the selection of particle synthetic routes can be dictated by sustainability and scalability criteria. These "green" formulations are candidates as new consolidants in art preservation, and the possibility of tuning local order in amorphous starch assemblies might also impact fields like food chemistry, pharmaceutics, and nanocomposites, where SNPs with tunable amorphousness are more advantageous than nanocrystals.

New horizons on advanced nanoscale materials for Cultural Heritage conservation

Nanomaterials have permeated numerous scientific and technological fields, and have gained growing importance over the past decades also in the preservation of Cultural Heritage. After a critical overview of the main nanomaterials adopted in art preservation, we provide new insights into some highly relevant gels, which constitute valuable tools to selectively remove dirt or other unwanted layers from the surface of works of art. In particular, the recent "twin-chain" gels, obtained by phase separation of two different PVAs and freeze-thawing, were considered as the most performing gel systems for the cleaning of Cultural Heritage. Three factors are crucial in determining the final gel properties, i.e., pore size, pore connectivity, and surface roughness, which belong to the micro/nanodomain. The pore size is affected by the molecular weight of the phase-separating PVA polymer, while pore connectivity and tortuosity likely depend on interconnections formed during gelation. Tortuosity greatly impacts on cleaning capability, as the removal of matter at the gel-target interface increases with the uploaded fluid's residence time at the interface (higher tortuosity produces longer residence). The gels' surface roughness, adaptability and stickiness can also be controlled by modulating the porogen amount or adding different polymers to PVA. Finally, PVA can be partially replaced with different biopolymers yielding gels with enhanced sustainability and effective cleaning capability, where the selection of the biopolymer affects the gel porosity and effectiveness. These results shed new light on the effect of micro/nanoscale features on the cleaning performances of "twin-chain" and composite gels, opening new horizons for advanced and "green"/sustainable gel materials that can impact on fields even beyond art preservation, like drug-delivery, detergency, food industry, cosmetics and tissue engineering.

From Nanoparticles to Gels: A Breakthrough in Art Conservation Science

Cultural heritage is a crucial resource to increase our society's resilience. However, degradation processes, enhanced by environmental and anthropic risks, inevitably affect works of art, hindering their accessibility and socioeconomic value. In response, interfacial and colloidal chemistry has proposed valuable solutions over the past decades, overcoming the limitations of traditional restoration materials and granting cost- and time-effective remedial conservation of the endangered artifacts. Ranging from inorganic nanoparticles to hybrid composites and soft condensed matter (gels, microemulsions), a wide palette of colloidal systems has been made available to conservators worldwide, targeting the consolidation, cleaning, and protection of works of art. The effectiveness and versatility of the proposed solutions allow the safe and effective treatment of masterpieces belonging to different cultural and artistic productions, spanning from classic ages to the Renaissance and modern/contemporary art. Despite these advancements, the formulation of materials for the preservation of cultural heritage is still an open, exciting field, where recent requirements include coping with the imperatives of the Green Deal to foster the production of sustainable, low-toxicity, and environmentally friendly systems. This review gives a critical overview starting from pioneering works up to the latest advancements in colloidal systems for art conservation, a challenging topic where effective solutions can be transversal to multiple sectors even beyond cultural heritage preservation, from the pharmaceutical and food industry, to cosmetics, tissue engineering, and detergency.

Eco-friendly recycling of silicon-rich lye: Synthesis of hierarchically structured calcium silicate hydrate and its application for phosphorus removal

Silicon-rich lye (SRL), a byproduct generated from pre-treatment of coal-based solid waste (CSW), was considered as a preponderant silicon source to prepare hierarchically nanostructured calcium silicate hydrate (C-S-H). Through the novel mild-causticization synthesis strategy, C-S-H was prepared under optimal caustic process conditions at time of 3 h, temperature of 80 °C, Ca/Si of 1.25:1, and active CaO to obtain a conversion rate of Si up to 97.33 % during the high-value utilization of SRL. The synthesized C-S-H possesses abundant mesoporous structure and massive exchangeable active sites, whose formation is advanced through an appropriate elevation regulation of caustic temperature and time. The silicate chain depolymerization occurs to C-S-H prepared in the highly alkaline system at higher caustic temperature, longer caustic period, especially at existence of massive sodium ions, but it presents higher polymerization degree at more aluminum co-existing. The adsorption capacity up to 119.27 mg/g for C-S-H presents a valid removal performance toward phosphorus in the wastewater than massive present reports. The removal mechanism of phosphorus can be identified as the surface chemisorption and formation of calcium phosphate co-precipitation. This study can provide considerable and potential guidance to the coordinated disposal between industrial solid wastes and wastewater purification.

Polydopamine-Modified Nanolime with High Kinetic Stability in Water for the Consolidation of Stone Relics

As a promising inorganic nanomaterial for the conservation of arenaceous sandstone-based relics such as wall painting, ancient building, stone heritage etc., nanolime (NL) has drawn increasing attention in recent years. Usually, NL needs to be dispersed into an alcoholic solution when applied. Nevertheless, a back-migration phenomenon of NL to the surface of the stone and delayed carbonation of NL enabled by alcohol do not guarantee good preservation effects. Dispersing NL into water can avoid the above issues. However, NL water suspension shows extremely poor kinetic stability, greatly restricting the penetration of NL into stone relics as well as bringing unfavorable impacts to the treated stone heritage. Here, we develop a facile method to synthesize polydopamine (PDA)-modified NL (PDA@NL). Characterizations demonstrate that PDA is uniformly distributed on the surface of NL particles though hydrogen bonds. In addition, the presence of PDA reduces the size of NL particles and achieves the highest specific surface area of NL reported to date. More importantly, water suspension of PDA@NL is far more stable than that of pure NL. The kinetic stability mechanism of PDA@NL in water is attributed to the lessened spatial interactions between NL particles, which is realized by the coverage of PDA on the surface of NL particles. Furthermore, the coverage of PDA does not inhibit carbonation. Within 105 h, NL in PDA@NL completes carbonation and obtains 93.7% calcite, which is comparable to that of NL suspension. Permeability tests prove that the PDA@NL suspension penetrates far deeper through stone specimens compared with the NL suspension. Additionally, PDA@NL presents good consolidation performances for stone samples. Our work opens a new direction for the modification of NL that will boost the studies of NL-modified materials as well as the conservation of cultural heritage.

Preliminary Studies of the Effects of Nanoconsolidants on Mural Paint Layers with a Lack of Cohesion

This paper reports the preliminary results of a comparative analysis of the effects of three consolidants on the color appearance of fresco paint layers affected by lack of cohesion. In vitro assays were performed with a laboratory-synthesized nanolime, a commercial nanolime (CaLoSiL® IP25), and a commercial acrylic resin (PrimalTM SF-016 ER®) applied by nebulization over two sets of replicas of buon and lime fresco painted with red and yellow ochres and smalt pigments. The paint layers were surveyed before, one week, and one month after treatment with technical photography in the visible range (Vis) and ultraviolet-induced fluorescence in the visible range (UVF), as well as optical microscopy (OM-Vis), colorimetry, spectrophotometry, and scanning electron microscopy coupled with energy dispersive x-ray spectroscopy (SEM-EDS). Experimental work also comprised the synthesis of nanolime and its characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetry analysis (TGA-DTG). The results show no alteration on pigments’ spectral curves and elemental composition. The increase in the CIEL* coordinate and ∆E color variation noticed after the treatment with the nanolimes is associated with a white haze formation on the paint surfaces. The impact on color appearance is higher on the darker tones.

The kinetic of calcium silicate hydrate formation from silica and calcium hydroxide nanoparticles

HYPOTHESIS

The mechanism of calcium silicate hydrate (CSH) formation, a relevant component of cement, the largest used material by mankind, is well documented. However, the effects of nano-sized materials on the CSH formation have not yet been evaluated. To this aim, a kinetic study on CSH formation via the "pozzolanic reaction" of nanosilica and calcium hydroxide nanoparticles, and in the presence of hydroxypropyl cellulose (HPC) as hydration regulator, is reported in this paper.

EXPERIMENTS

The reagents were mixed with water and cured at 10, 20, 30 and 40 °C. The reaction kinetics was studied with differential scanning calorimetry (DSC). A Boundary Nucleation and Growth model (BNGM) combined with a diffusion-limited model was used to analyze the data, yielding induction times, reaction rates, activation energies, nucleation and linear growth rates, and the related diffusion coefficients.

FINDINGS

The rate constants k_B and k_G, which are, respectively, the rate at which the nucleated boundary area transforms, and the rate at which the non-nucleated grains between the boundaries transform, increase with temperature. Their different temperature dependence accounts for the prevailing effect of nucleation over nuclei growth at progressively lower temperatures. The nucleation rate, I_B, is strongly enhanced when using nanomaterials, while the linear growth rate, G, is limited by the tightly packed structure of the transforming matrix. HPC influences the kinetics between 10 and 30 °C; at 40 °C the temperature effect becomes predominant. HPC delays induction and acceleration periods, increases E_a(k_B), and enhances the reaction efficiency during the diffusion regime, by retaining and delivering water over the matrix, thus allowing a higher water consumption in the hydration reaction of CSH.

How Science Can Contribute to the Remedial Conservation of Cultural Heritage

Colloid science is contributing solutions to counteract the degradation of artifacts, favoring their transfer to future generations. Advanced materials such as nanoparticles, coatings, gels and microemulsions have been assessed in conservation, spanning from archeological sites to modern and contemporary art. We give an overview of the fundamental milestones and latest innovations in conservation science, targeting solutions and tools for remedial conservation based on green nanomaterials and hybrid systems. Future perspectives and outstanding challenges in this exciting field are then outlined.

Advanced Materials in Cultural Heritage Conservation

Cultural Heritage is a crucial socioeconomic resource; yet, recurring degradation processes endanger its preservation. Serendipitous approaches in restoration practice need to be replaced by systematically addressing conservation issues through the development of advanced materials for the preservation of the artifacts. In the last few decades, materials and colloid science have provided valid solutions to counteract degradation, and we report here the main highlights in the formulation and application of materials and methodologies for the cleaning, protection and consolidation of works of art. Several types of artifacts are addressed, from murals to canvas paintings, metal objects, and paper artworks, comprising both classic and modern/contemporary art. Systems, such as nanoparticles, gels, nanostructured cleaning fluids, composites, and other functional materials, are reviewed. Future perspectives are also commented, outlining open issues and trends in this challenging and exciting field.

Analytical Techniques for the Preservation of Cultural Heritage: Frontiers in Knowledge and Application

Chemistry is considered as the heart of preservation science. The archaeological objects are an organic-inorganic system and need comprehensive techniques to investigate the different materials with a high resolution and accuracy. The characterization process of archaeological materials is a useful guide to develop the right strategy for the conservation and intervention of the objects. In analytical chemistry practice, there are many techniques to employ the characterization process of the artworks: molecular, elemental, imaging, surface, thermal, separation, nuclear, dating, electrochemical, and miscellaneous techniques. It highlights the potential of chemical investigations to present reliable information to the conservators and art historians.

Selected Aspects Regarding the Restoration/Conservation of Traditional Wood and Masonry Building Materials: A Short Overview of the Last Decade Findings

Vernacular buildings are usually constructed using materials at hand, including wood, natural stone and bricks (either clay or mud bricks). All those materials are exposed to a series of environmental factors, affecting their structure and integrity. The literature review was conducted using different databases (Scopus, Web of Science, ScienceDirect, SpringerLink) using as keywords the historical material, “heritage” and the terms regarding the desired effect, within the envisaged time period (2010–2019). The assessment of the results was performed by manual inspection (reading the entire article) and the selection of the works to be inserted in the current review was made by evaluating the contribution to the field. This review summarizes different aspects related to the restoration and conservation of wooden and masonry elements of traditional buildings, including materials used for biocidal interventions, protection against abiotic factors, cleaning and consolidation agents. Finally, a critical discussion regarding the current limitations and future perspectives concludes the review work, envisaging the role of researchers specialized in materials science in the context of cultural heritage conservation.