Rational design of α-Fe2O3 nanocubes supported BiVO4 Z-scheme photocatalyst for photocatalytic degradation of antibiotic under visible light

Z-scheme Fe@Fe2O3/BiOBr heterojunction with efficient carrier separation for enhanced heterogeneous photo-Fenton activity of tetracycline degradation: Fe2+ regeneration, mechanism insight and toxicity evaluation

The recombination of photogenerated carrier leads to inefficient Fe2+ regeneration, which limits the extensive application of heterogeneous photo-Fenton. Here, a novel Fe@Fe2O3/BiOBr catalyst with Z-scheme heterojunction structure is designed, and the establishment of the Z-scheme heterojunction facilitates the separation and transfer of photogenerated carrier and maintains the superior redox capability of the system. As-prepared Fe@Fe2O3/BiOBr catalyst exhibits outstanding catalytic performance and stability, especially for the optimum composite FFB-3, its degradation efficiency of tetracycline (TC) achieves 98.22% and the mineralization degree reaches 59.48% within 90 min under natural pH. The preeminent catalytic efficiency benefited from the synergistic of heterogeneous photo-Fenton and Z-scheme carriers transfer mechanism, where Fe2+ regeneration was achieved by photogenerated electrons, and increased hydroxyl radicals were produced with the participation of H2O2 in-situ generated. The results of free-radical scavenging experiment and ESR illustrated that •OH, •O2-, 1O2 and h+ were active species participating in TC degradation. Furthermore, the TC degradation paths were proposed according to LC-MS, and the toxicity evaluation result showed that the toxicity of TC solutions was markedly decreased after degradation. This study provides an innovative strategy for heterogeneous photo-Fenton degradation of antibiotic contaminations by constructing Z-scheme heterojunctions.

Rational Design and Synthesis of Fe-Doped Co-Based Coordination Polymer Composite Photocatalysts for the Degradation of Norfloxacin and Ciprofloxacin

The solar light-responsive Fe-doped Co-based coordination polymer (Fe@Co-CP) photocatalyst was synthesized under mild conditions. [Co(4-padpe)(1,3-BDC)]n (Co-CP) was first constructed using mixed ligands through the hydrothermal method. Then, Fe was introduced into the Co-CP framework to achieve the enhanced photocatalytic activity. The optimal Fe@Co-CP-2 exhibited excellent catalytic degradation performance for norfloxacin and ciprofloxacin under sunlight irradiation without auxiliary oxidants, and the degradation rates were 91.25 and 92.66% in 120 min. These excellent photocatalytic properties were ascribed to the generation of the Fe-O bond, which not only enhanced the light absorption intensity but also accelerated the separation efficiency of electrons and holes, and hence significantly improved the photocatalytic property of the composites. Meanwhile, Fe@Co-CP-2 displayed excellent stability and reusability. In addition, the degradation pathways and intermediates of antibiotic molecules were effectively analyzed. The free radical scavenging experiment and ESR results confirmed that •OH, •O2-, and h+ active species were involved in the catalytic degradation reaction; the corresponding mechanisms were deeply investigated. This study provides a fresh approach for constructing Fe-doped Co-CP-based composite materials as photocatalysts for degradation of antibiotic contaminants.

Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

Research progress on composite material of bismuth vanadate catalyzing the decomposition of Quinolone antibiotics

Since quinolone is a kind of synthetic broad-spectrum antibacterial drugs, with the widespread use of this class of antibiotics, the risk and harm to human health have been attendant to the sewage containing quinolones which are discharged into the environment. Photocatalysis is considered as a promising technology for antibiotic degradation for its strong redox properties and reaction rate. As a metal oxidizing substance, Bismuth vanadate (BiVO4) is such a popular and hot material for the degradation of organic pollutants recently due to its good photocatalytic activity and chemical stability. Numerous studies have confirmed that BiVO4 composites can overcome the shortcomings of pure BiVO4 and cleave the main structure of quinolone under photocatalytic conditions. This paper mainly outlines the research progress on the preparation of BiVO4 composites and the degradation of quinolone antibiotics from the perspective of improving the catalysis and degrading the efficiency mechanism of BiVO4 composites.

Sphere-rod-like Ag/AgCl@Fe2O3 Z-scheme heterojunction as photocatalysts for efficient degradation of tetracycline under visible light irradiation

Integration of multi-functional components into one is urgent for creating a viable platform to improve photocatalytic efficiency for environmental treatment. Here, MIL-88B-NH2 (Fe) was firstly employed to capture Ag+ cation for the formation of AgCl@MIL-88B-NH2 (Fe), and then turned into the strongly coupled Ag/AgCl@Fe2O3 with sphere-rod-like structure. As prepared Z-scheme Ag/AgCl@Fe2O3 heterojunction exhibited outstanding photocatalytic performance of tetracycline (TC) with a removal efficiency of 94.9% and a reaction kinetics of 0.0272 min-1, superior to single Ag/AgCl or Fe2O3, which attributed to the broad light absorption range and accelerated electron-hole pair separation stemmed from the synergistic effect between surface plasmon resonance effect (SPR) of metal Ag and AgCl/Fe2O3 heterojunction. Meanwhile, Ag/AgCl@Fe2O3 was found to be highly catalytic in the degradation of TC even after consecutive runs. Moreover, active species trapping experiments combined with ESR techniques revealed that superoxide radical, hydroxyl radical, electron, and hole all were involved in photodegradation of TC process. Importantly, the degradation intermediate products of TC were revealed in depth by LC-MS, and a possible degradation pathway was further proposed. This work opens up new insights into the integration of functional composites for the construction of advanced photocatalysts applied in environmental purification.

Green synthesis of rectangular hollow tubular carbon nitride via in-situ self-assembly strategy to enhance the degradation of tetracycline hydrochloride under visible light irradiation

It has been an urgent requirement for materials with remarkable performance in the photocatalytic degradation of organic contaminants by photocatalytic technology. Limited surface area and speedy recombination rate of photogenerated charge carriers seriously restrain the application of g-C3N4. Morphology control is a powerful approach to enhance the photocatalytic efficiency of g-C3N4. Herein, we reported a method to attain graphitic carbon nitride with rectangular hollow tubular morphology and asperous surface (TUM-CN-2) which is prepared from urea-melamine hydrothermal products and trithiocyanuric acid by self-assembling without using organic solvents or template agents. The specific surface area, photocatalytic activity, and photo-generated carriers migration and separation rate of the obtained photocatalyst TUM-CN-2 are vastly improved. Contrasted with pure g-C3N4, the degradation rate of tetracycline hydrochloride (TCH) and Rhodamine B (RhB) was enhanced about 3.04 and 13.96 times in visible light irradiation, respectively. Moreover, the interference parameters, active free radicals, potential degradation mechanism, and degradation paths of TCH were researched systematically. This work provides a green way to acquire the modified g-C3N4 with splendid catalytic activity through the self-assembly method.

Synergistic catalysis induced by a multi-component system constructed by DBD plasma combined with α-Fe2O3/FeVO4/HCP and peroxymonosulfate for gatifloxacin removal

The dielectric barrier discharge (DBD) multi-component system containing plasma, α-Fe₂O₃/FeVO₄, and peroxymonosulfate (PMS) with high catalytic activity was successfully constructed. Thereinto, α-Fe₂O₃/FeVO₄ was loaded on the honeycomb ceramic plate (HCP) surface (α-Fe₂O₃/FeVO₄/HCP) and placed under the water surface below the discharge area. The catalytic activity was evaluated by the removal rate of gatifloxacin (GAT), and the DBD+α-Fe₂O₃/FeVO₄+PMS system exhibited the optimal catalytic activity. The enhanced catalytic activity can be attributed to the fact that the occurrence of synergistic catalysis that simultaneously includes plasma oxidation, photocatalysis, PMS oxidation, O₃ catalysis, and Fenton reaction. The effect of various initial degradation parameters including input power, PMS dosage, pH, etc. On GAT removal was investigated. DBD+α-Fe₂O₃/FeVO₄+PMS system has a significant increase in the concentration of H₂O₂ and O₃, and the role played in the multi-component system was analyzed. The identification and analysis of organic matters during GAT degradation were visualized with the help of 3D EEMs. HPLC-MS and theoretical calculations identified the major intermediates and further deduced the possible GAT degradation pathways. Additionally, the acute toxicity of the major intermediates was predicted by the QSAR model. Finally, the possible mechanisms of synergistic catalysis to enhance catalytic activity were discussed based on the characteristics of several advanced oxidation processes (AOPs) and the results of experimental and characterization. This work provides a feasible technical route and theoretical basis for wastewater treatment by plasma combined with other AOPs.

Facile synthesis of NiAl2O4/g-C3N4 composite for efficient photocatalytic degradation of tetracycline

Designing high-efficiency photocatalysts responsive to visible light is important for the degradation of antibiotics in water. Heterojunction engineering is undoubtedly an effective strategy to improve the photocatalytic performance. In this work, spinel-type metal oxides (NiAl₂O₄, NAO) are synthesized by a simple sol-gel and calcination process. After compounding graphitic carbon nitride (g-C₃N₄), NAO/g-C₃N₄ heterojunction is obtained, which then is used as the photocatalyst for tetracycline hydrochloride (TC). The effects of photocatalyst dosage, the initial concentration of TC, and solution pH on photodegradation performance are systematically studied. The removal rate of TC on NAO/g-C₃N₄ reach up to ∼90% after visible light irradiation for 2 hr and the degradation rate constant is ∼7 times, and ∼32 times higher than that of pure NAO and g-C₃N₄. The significantly improved photocatalytic activity can be attributed to the synergistic effect between well matched energy levels in NAO/g-C₃N₄ heterojunctions, improvement of interfacial charge transfer, and enhancement of visible light absorption. This study provides a way for the synthesis of efficient photocatalysts and an economic strategy for removing antibiotics contamination in water.

Novel g-C3N4/BiVO4 heterostructured nanohybrids for high efficiency photocatalytic degradation of toxic chemical pollutants

Novel heterostructured hybrid catalysts are essential for the efficient photocatalytic removal of organic pollutants from wastewater generated by the pharmaceutical and textile industries. In this study, novel g-C₃N₄/BiVO₄ nanohybrid catalysts were prepared using a solvothermal technique, and examined their structural and optical properties using different characterizations. The X-ray diffraction analysis confirmed the monoclinic crystal phase of BiVO₄. Field emission scanning electron microscopy (FESEM) images revealed that g-C₃N₄ sheets anchored on the surface of BiVO₄ nanospheres. X-ray photoelectron spectroscopy (XPS) analysis confirmed the oxidation states of g-C₃N₄/BiVO₄ composite sample. UV-Vis DRS spectroscopy analysis revealed that the composite (2.08 eV) sample had a reduced bandgap compared to other samples. The photocatalytic properties of the prepared samples were tested in the presence of organic methylene blue (MB) and antibiotic tetracycline (TC) pollutants under visible light illumination. The hybrid composite catalyst exhibited enhanced photocatalytic degradation efficiency of MB (88%) and TC (89%) pollutants at elevated rate constants of 0.0128 and 0.01174 min^-1, respectively. The improved catalytic performance of the composite catalyst is due to the heterojunctions between g-C₃N₄ and BiVO₄ that successfully reduced the rate of charge carrier recombination in the catalyst system. Scavenger experiments revealed that O₂^●- and h⁺ radicals played a main role in the degradation of the chemical pollutants. The developed g-C₃N₄/BiVO₄ heterostructured catalyst is a suitable candidate for removing contaminants from industrial wastewater because of its facile fabrication and exceptional photocatalytic activity under visible light irradiation.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

Efficient electron transfer and copper species transformation under the synergy of BiVO4 and novel Cu2(OH)3F nanosheets

Here, we report a simple and efficient strategy for evenly in situ growth of Cu₂(OH)₃F nanosheets on BiVO₄ spheres as a novel photo-Fenton-like catalyst using hydrothermal method. The Cu₂(OH)₃F/BiVO₄ composite catalysts showed great performance for the organic pollutants degradation under visible light irradiation due to the efficient electron transfer and copper species transformation. The synergetic between Cu₂(OH)₃F and BiVO₄ not only promoted the separation of electrons and holes but also enhanced the Cu²⁺ reduction, thus produced more strong oxidative radicals under a wide pH value range. The activity of Cu₂(OH)₃F/BiVO₄ composite for methylene blue degradation was 6.03 and 5.47 times more than that of pristine Cu₂(OH)₃F and BiVO₄, respectively. The composite catalysts were characterized with various methods and their stability and adaptability were also evaluated. Finally, a possible photo-Fenton-like reaction mechanism was also proposed based on the band structure/position and reaction species.

Ag-modified α-Fe2O3 spherical particles interspersed on hierarchical flower-like NiAl-LDH microspheres with Z-scheme for significantly enhanced CO2 photoreduction into CO

The conversion of carbon dioxide (CO2) into value-added C1 and/or C2 chemicals by photocatalytic technology has been regarded as a "one stone-two birds" solution for environmental degradation and energy shortage. In this work, a novel Z-scheme mechanism photocatalyst of Ag-modified α-Fe2O3 spherical particles interspersed on hierarchical flower-like layered nickel-aluminum hydroxides (NiAl-LDH) microspheres (α-Fe2O3/Ag/NiAl-LDH, designated as FALDH) is successfully prepared by a combined in-situ hydrothermal and grating strategy. As expected, the optimal sample of FALDH-5/10 exhibits significantly enhanced photocatalytic performance for CO2 reduction with a highest CO yield up to 46.7 μmol g-1 under simulated sunlight without any sacrificial reagents and photosensitizers, compared with the pristine NiAl-LDH, binary Ag/NiAl-LDH and α-Fe2O3/NiAl-LDH, as well as surpassing the previously reported LDH-based counterparts. The high activity is ascribed to strong interaction between the NiAl-LDH microspheres and highly-dispersed Ag/α-Fe2O3 particles, boosted CO2 adsorption capacity and optimized bandgap from α-Fe2O3, and increased utilization efficiency of light from Ag. This study offers a new idea for more efficient stimulating the photocatalytic activity of LDHs by the construction of Z-scheme heterojunction with the aid of plasmonic metal(s) for CO2 photoreduction, and is expected to be employed to other photocatalytic applications effectively.

Construction of direct Z-scheme g-C3N4/BiYWO6 heterojunction photocatalyst with enhanced visible light activity towards the degradation of methylene blue

Construction of the Z-scheme heterojunction photocatalyst achieved highly improved photocatalytic ability by its high redox ability of the photoinduced e^--h⁺ pairs. In the study, Z-scheme g-C₃N₄/BiYWO₆ heterojunction photocatalyst is prepared by the single-step hydrothermal method. Further, its photocatalytic ability was assessed by degrading methylene blue under visible light exposure. Particularly, the optimized 30 wt% of g-C₃N₄ in the g-C₃N₄/BiYWO₆ composite exposes almost complete degradation after 90 min, that is ~ 3.0 times greater than the bare BiYWO₆ and g-C₃N₄ with the rate constant value 0.032 min^-1. Experimentally, the radical trapping studies indicate O₂·^- and ·OH radicals are playing a vital role in the photocatalytic degradation process. Also, the Z-scheme g-C₃N₄/BiYWO₆ heterojunction photocatalyst exhibits excellent photoelectrochemical property and it is stable after 5 cycles, which indicates its good reusability nature. These enhancements are due to the newly formed heterostructure that facilitates the migration and separation efficiency of the photoproduced e^--h⁺ pairs. Hence, the synthesized Z-scheme g-C₃N₄/BiYWO₆ heterostructure could be an excellent material for wastewater remediation works.

A facile synthesis of visible light driven Ni3V2O8 nano-cube/BiVO4 nanorod composite photocatalyst with enhanced photocatalytic activity towards degradation of acid orange 7

Photocatalysis is one of the promising method to degrade harmful organic pollutants under visible light exposure. In this work, a novel Ni₃V₂O₈/BiVO₄ nanocomposite has been prepared by one-pot hydrothermal method, and investigated through X-ray diffraction, FT-IR, UV-visible diffuse reflectance spectroscopy, scanning and transmission electron microscopy and photoluminescence techniques. Subsequently, the photocatalytic performance of Ni₃V₂O₈/BiVO₄ nanocomposite has been examined by degrading AO7 under visible light illumination. The photocatalytic efficiency of the optimized 1:2 ratio of Ni₃V₂O₈/BiVO₄ nanocomposite photocatalyst is found to be 87% with a rate constant value of 0.03387 min^-1 which are higher than those of other prepared photocatalysts. This nanocomposite exhibits excellent stability even after 3 three cycles, and shows 1.135- and 1.17-times higher photocurrent intensity than pure BiVO₄ and Ni₃V₂O₈ respectively. The mechanism for the degradation of AO7 over Ni₃V₂O₈/BiVO₄ nanocomposite photocatalyst has been proposed.

Synthesis of novel CuNb2O6/g-C3N4 binary photocatalyst towards efficient visible light reduction of Cr (VI) and dyes degradation for environmental remediation

The further development of an efficient and sustainable water treatment requires the development of a very active and controllable photocatalyst. The heterojunction is a promising site where the activity of such a photocatalyst can be enhanced. Organic dyes have become a severe concern in recent years owing to their significant presence in wastewater. Hexavalent Chromium (Cr (VI)) is a potential carcinogen also exhibiting great persistence in wastewater. So, a low-waste, high-performance materials is required to eliminate organic dyes and Cr (VI) from wastewater. In this study, CNO/g-CN (CuNb₂O₆/g-C₃N₄) photocatalyst synthesized via co-precipitation, followed by calcination which were characterized using physiochemical and photo-electrochemical approaches to identify their structural, photochemical and optical traits. The uniqueness of the synthesized photocatalyst is due to both its efficient photo-reduction of Cr (VI) and photo-degradation of Rhodamine B (RhB), Methylene Blue (MB) and Methyl Orange (MO) under visible light. The CNO/g-CN composite with 30% CNO heterojunctions exhibited the highest photocatalytic activity with Cr (VI) 92.80% photoreduction and efficiency degradation for RhB, MB, MO of 99.6%, 98.50%, 99.0%, respectively, with constant rate (k). This efficient photocatalytic activity is attributed to the lower recombination rate of electron-hole pairs. Free radical trapping experiments showed that ^•O₂^- and h⁺ play an important role in the photodegradation. The study, therefore, opens an alternative route in the synthesis of very efficient binary photocatalysts for application in environmental remediation.

Carbon hollow matrix anchored by isolated transition metal atoms serving as a single atom cocatalyst to facilitate the water oxidation kinetics of bismuth vanadate

Here, nitrogen doped carbon hollow matrix anchored by isolated transition metal atoms (M@NC, M = Fe, Co or Ni) are firstly utilized as new single atom cocatalysts (SACCs) to enhance the PEC performance of Mo, W ions co-doped BiVO₄ (Mo, W: BVO) through a simple spin-coating method. It is found that Mo, W: BVO modified with Fe@NC exhibits higher photocurrent density than the one decorated with Co@NC or Ni@NC due to the relatively low redox potential of Fe³⁺/Fe²⁺ (0.77 V vs SHE). During the photoelectrochemical (PEC) process, the Fe²⁺ ions are easier to accept the photogenerated holes of BVO and be oxidized to Fe³⁺ ions. Then, Fe³⁺ ions are reduced to Fe²⁺ again by accepting the electrons of water, and evolve oxygen simultaneously. Hence, Fe@NC could facilitate the water oxidation kinetics through the redox cycle of Fe ions and promote the charge separation efficiency by capturing the photogenerated holes. Theoretical calculations demonstrate that the deposition of Fe atoms make NC negatively charged, which is conducive to receiving the photogenerated holes. As a result, Mo, W: BVO/Fe@NC exhibits higher photocurrent density (3.2 mA/cm² vs RHE) than other BVO-based samples. This work opens up a new application field of SACCs serving as OER cocatalysts, and may provide a universal strategy to construct the efficient PEC photoelectrodes.

Emerging bismuth-based direct Z-scheme photocatalyst for the degradation of organic dye and antibiotic residues

Organic dye and antibiotic residues are some of the key substances that can contaminate the environment due to their wide usage in various industries and modern medicine. The degradation of these substances present in waterbodies is essential while contemplating human health. Photocatalysts (PSs) are promising materials that develop highly reactive species instantly by simple solar energy conversion for degrading the organic dye and antibiotic residues and converting them into nontoxic products. Among numerous semiconductors, the bismuth (Bi)-containing PS has received great attention due to its strong sunlight absorption, facile preparation, and high photostability. Owing to the technology advancement and demerits of the traditional methods, a Bi-containing direct Z-scheme PS has been developed for efficient photogenerated charge carrier separation and strong redox proficiency. In this review, a synthetic Bi-based Z-scheme heterojunction that mimics natural photosynthesis is described, and its design, fabrication methods, and applications are comprehensively reviewed. Specifically, the first section briefly explains the role of various semiconductors in the environmental applications and the importance of the Bi-based materials for constructing the Z-scheme photocatalytic systems. In the successive section, overview of Z-scheme PS are concisely discussed. The fourth and fifth sections extensively explain the degradation of the organic dyes and antibiotics utilizing the Bi-based direct Z-scheme heterojunction. Eventually, the conclusions and future perspectives of this emerging research field are addressed. Overall, this review is potentially useful for the researchers involved in the environmental remediation field as a collection of up-to-date research articles for the fabrication of the Bi-containing direct Z-scheme PS.

Rational design of ZnO-zeolite imidazole hybrid nanoparticles with reduced charge recombination for enhanced photocatalysis

Semiconducting zinc oxide nanoparticles (ZnO NPs) hold great potential as photocatalysts in wastewater treatment because of their favorable bandgap and cost-effectiveness. Unfortunately, ZnO NPs usually show rapid charge recombination that limits their photocatalytic efficacy significantly. Herein, we report a facile way of modifying ZnO NPs with zeolite imidazole framework-8 (ZIF8). A synergy between the two components may tackle the drawback of fast charge recombination for pristine ZnO NPs. Improved performance of photocatalytic degradation of methylene blue (MB) is confirmed by comparing with pristine ZnO and ZIF8 as the catalysts. The ZIF8 in the composite serves as a trap for photogenerated electrons, thus reducing the rate of charge recombination to enhance the photocatalysis rate. In addition, the hybridization process suppresses the aggregation of ZnO NPs, providing a large surface area and a greater number of active sites. Moreover, a small shift in the absorption band of ZnO@ZIF8 (10) NPs towards higher wavelength, also witnessed a little contribution towards enhanced photocatalytic properties. Mechanistic studies of the photocatalytic process of MB using ZnO@ZIF8 NPs catalyst reveal that hydroxyl radicals are the major reactive oxygen species. The facile hybridization of ZnO with ZIF8 provides a strategy for developing new photocatalysts with wide application potential.

Three-dimensional BiVO4-based semiconductor photocathode for high efficiency photo-assisted Zn-iodine redox flow batteries

Aqueous Zn-iodine redox flow batteries have aroused great interest for the features of high capacity, excellent stability, low cost, and high safety, yet the dissatisfying energy efficiency still limits their future advancement. In this work, three-dimensional semiconductor BiVO₄nanoparticles decorated hierarchical TiO₂/SnO₂arrays (BiVO₄@TiO₂/SnO₂) were applied as photocathode in Zn-iodine redox flow batteries (ZIRFBs) for the realization of efficient photo-assisted charge/discharge process. The photogenerated carriers at the solid/liquid interfaces boosted the oxidation process of I^-, and thus contributed to a significant elevation in energy efficiency of 14.9% (@0.5 mA cm^-2). A volumetric discharge capacity was extended by 79.6% under light illumination, owing to a reduced polarization. The photocathode also exhibited an excellent durability, leading to a stable operation for over 80 h with a maintained high energy efficiency of ∼90% @0.2 mA cm^-2. The research offers a feasible approach for the realization of high-energy-efficiency aqueous Zn-iodine batteries towards high-efficiency energy conversion and utilization.

Z-Scheme Heterojunction of 3-Dimensional Hierarchical Bi3O4Cl/Bi5O7I for a Significant Enhancement in the Photocatalytic Degradation of Organic Pollutants (RhB and BPA)

In this study, we report the synthesis of a 3-dimensional (3D) hierarchical Bi3O4Cl/Bi5O7I (BOC/BOI) heterostructure for the photocatalytic degradation of Rhodamine-B (RhB) dye and colorless Bisphenol-A (BPA) pollutant under visible light. The heterostructure was prepared using in situ solvothermal and calcination methods. BOC/BOI exhibits a 3D hierarchical structure constructed with thin nano-platelets. The photocatalytic performance of the BOC/BOI photocatalyst demonstrated that the degradation efficiencies of RhB and BPA were 97% and 92% after light illumination within 90 and 30 min, respectively. In comparison, bare BOC and BOI efficiencies were only 20% and 10% for RhB dye, respectively, and 2.3% and 37% for BPA aqueous pollutants, respectively. Moreover, radical trapping measurements indicated that •O2− and •OH radicals played prominent roles in RhB and BPA degradation into mineralization. Analysis of band structures and photochemical redox reactions of BOC/BOI revealed a Z-scheme charge transfer between BOC and BOI by an internal electric field formed at the interface. Therefore, the highly improved photocatalytic performance of the BOC/BOI heterostructure is attributed to the synergetic effects of large surface area, high visible-light absorption, and the enhanced separation and transport of photo-excited electron–hole pairs induced by the hierarchical and Z-scheme heterojunction of the BOC/BOI.

Uniform H-CdS@NiCoP core-shell nanosphere for highly efficient visible-light-driven photocatalytic H2 evolution

Constructing highly efficient and cost-effective photocatalyst system has been a big challenge for photocatalysis. Herein, CdS nanosphere (N-CdS), hollow CdS (H-CdS) and a series of H-CdS@NiCoP core-shell nanospheres have been successfully prepared via a facile hydrothermal method. The activity test showed that H-CdS exhibited higher photocatalytic activity (3.34 mmol g^-1h^-1) compared with N-CdS (0.99 mmol g^-1h^-1) under visible light irradiation (λ ≥ 420 nm), suggesting that hollow structure could effectively improve photocatalytic activity. Moreover, the H-CdS@NiCoP-7 wt% displayed a maximum photocatalytic H₂ evolution rate of 13.47 mmol g^-1h^-1, which was about 4 times and 2.5 times higher than that of pristine H-CdS and H-CdS@Pt-3 wt%, respectively. Furthermore, H-CdS@NiCoP-7 wt% exhibited a good stability during 20 h test. The physicochemical properties were characterized by XRD, SEM, TEM, XPS, UV-vis DRS, PL and photoelectrochemical technique. The results showed that NiCoP addition can construct p-n junction with H-CdS and effectively promote the charge transfer from CdS to NiCoP, which improved the photocatalytic hydrogen evolution activity. This work revealed that NiCoP could react as an excellent co-catalyst for enhancing H-CdS photocatalytic activity.

Structure, morphology and photocatalytic performance of europium doped bismuth vanadate

Europium-doped bismuth vanadate EBVO-x (0≦x≦7) with different crystalline phases have been successfully synthesized via a simple one-pot hydrothermal method. X-ray diffractometer, Raman scattering and Scanning electron microscope revealed that the...

Facilitating space charge directional separation for enhancing photocatalytic CO2 reduction over tetragonal BiVO4

Spatially separated Ag/MnOx cocatalysts are selectively loaded on BiVO4 by a photo-deposition method. The synergistic effect of the dual cocatalysts enables the optimal photocatalytic activity of the sample to be 3.1 times higher than that of pristine BiVO4.

The enhanced photocatalytic activity of TiO2(B)/MIL-100(Fe) composite via Fe–O clusters

An integrated TiO2(B)/MIL-100(Fe) composite was designed for improving photocatalytic activity via Fe–O–Ti electronic tunnel and Fe–O clusters.

Enhanced Visible-Light Absorption of Fe2O3 Covered by Activated Carbon for Multifunctional Purposes: Tuning the Structural, Electronic, Optical, and Magnetic Properties

Visible-light absorption is a critical factor for photocatalyst activity and absorption of electromagnetic (EM) interference application. The band gap of Fe2O3 is 2 eV, which can be increased by doping with a high-band-gap material such as carbon from activated carbon (AC) with a band gap of 4.5 eV for increased visible-light absorption. The porosity decreases from 88 to 81.6%, and the band gap increases from 2.14 to 2.64 eV by increasing the AC from 10 to 25%, respectively. The photocatalytic activity takes 120 min to produce a harmless product for 10-20% AC, but 25% AC shows 89.5% degradation in only 90 min and the potential to attenuate the EM wave up to 99% due to the RL being below -20 dB. The second- and third-cycle degradation achieved by the composite Fe2O3-AC having 25% AC is 88.2 and 86.5% in 90 min, respectively. The pore of the surface state of AC contains a trapped charge, and interaction occurs between the charge (electron/hole) and O2 or H2O to produce OH and superoxide (O2 -) radicals. These radicals move inside the molecule of the pollutant (methylene blue (MB)) to break up the bond, with the final products being H2O and CO2. The X-ray photoelectron (XPS) spectra show that oxygen plays a key role in the interatomic bonding with Fe, C, and MB atoms. The best absorption of EM interference is -21.43 dB, with degradation reaching 89.51% in only 90 min for 25% AC due to its higher band gap and anisotropy constant. Fe2O3-carbon is a multifunctional material for the green environment because of its electromagnetic interference absorption and photodegradation of wastewater.

Enhanced photocatalytic degradation activity of Z-scheme heterojunction BiVO4 /Cu/g-C3 N4 under visible light irradiation

A novel BiVO₄ /Cu/g-C₃ N₄ heterostructure photocatalyst was synthesized by thermal condensation, hydrothermal, and in situ precipitation method. The microscopic morphology and chemical composition of the synthesized samples were analyzed by XRD, SEM, FT-IR, XPS, and other characterizations. BiVO₄ /Cu/g-C₃ N₄ (BiVO₄ /Cu:g-C₃ N₄ mass ratio was 1:1) photocatalyst had the optimal photocatalytic degradation activity for tetracycline (TC) wastewater under visible light irradiation (120 min, 74.8%). The introduction of Cu and Z-scheme heterojunction was further confirmed by UV-vis, PL, EIS, and capture mechanism analysis, which effectively accelerated the separation and transfer rate of photogenerated electron holes and enhanced the strong oxidation of h⁺ and •O₂ ^- active species. BiVO₄ /Cu/g-C₃ N₄ heterojunction photocatalytic material has potential application value in the removal of refractory pollutants in wastewater. PRACTITIONER POINTS: A novel Z-scheme BiVO₄ /Cu/g-C₃ N₄ photocatalyst with excellent photocatalytic activities and stability was prepared to treat tetracycline (TC) wastewater. 1:1 CBCN (BiVO₄ /Cu:g-C₃ N₄ mass ratio was 1:1) photocatalyst exhibited the highest photocatalytic performance for TC wastewater. The Z-scheme heterojunction and Cu act as the interfacial charge transfer medium accelerated the transfer and separation of carriers.

Boosted charge transfer in dual Z-scheme BiVO4@ZnIn2S4/Bi2Sn2O7 heterojunctions: Towards superior photocatalytic properties for organic pollutant degradation

A core-shell structured dual Z-scheme ternary photocatalyst BiVO₄@ZnIn₂S₄/Bi₂Sn₂O₇ was fabricated via hydrothermal and heat-circumfluence strategy. With ZnIn₂S₄ serving as a bridge to connect BiVO₄ and Bi₂Sn₂O₇, the developed ternary catalyst displayed boosted charge transfer and spatial separation capabilities. The effect of mass ratios of BiVO₄@ZnIn₂S₄ and Bi₂Sn₂O₇ on photodegradation efficiency under visible light irradiation was explored. The optimal ternary heterojunction photocatalyst possessed remarkable photocatalytic rate constant for Rhodamine B (RhB) degradation, which was 63 and 12 times higher than that of BiVO₄ and Bi₂Sn₂O₇, respectively. In addition, the as-prepared ternary photocatalyst had good universality. Notably, the novel dual Z-scheme photocatalysts could improve the separating/transferring efficiency and reduction/oxidation ability of charge carriers. Meanwhile, the hierarchical structure offered sufficient reaction sites for photodegradation. This work provides a new insight into the rational design of ternary dual Z-scheme photocatalysts.

Heterogeneous Interface Design to Enhance the Photocatalytic Performance

Heterojunction photocatalysts, which can relieve the low carrier separation efficiency and insufficient light absorption ability of one catalyst, have received extensive attention. To construct an ideal heterojunction for photocatalysis, most previous studies focused on energy band structure engineering to prolong charge carrier lifetime and increase the reaction rates, which are critical to increase the photocatalytic activity. Here, the heterojunction interface was surprisingly found to be another important factor to affect the photocatalytic performance. We design three heterojunction interface models of α-Fe₂O₃/Bi₂O₃, corresponding to "ring-to-face", "face-to-face", and "rod-to-face". By tuning the heterogeneous interfaces, the photocatalytic performance of composites was significantly improved. On the basis of the type I energy band structures, the optimized face-to-face model realized a photocatalytic efficiency of 90.8% that of pure α-Fe₂O₃ (<30%) for degradation of methylene blue and a higher efficiency (80%) for degrading tetracycline within 60 min, which were superior to most Fe/Bi/O-based photocatalytic heterojunctions. Furthermore, the results disclosed that the enhanced performance was owing to the sufficient interfacial contact and low interfacial resistance of the face-to-face model, which provided sufficient channels for efficient charge transfer. This work offers a new direction of tuning heterojunction interface for designing composite photocatalysts.

Visible-light activation of peroxymonosulfate by NiCo2O4/Bi24O31Br10 to accelerate tetracycline degradation

Possible degradation mechanism with NiCo₂O₄/Bi₂₄O₃₁Br₁₀ in a PMS/vis system.