Internal electric field induced S–scheme heterojunction MoS2/CoAl LDH for enhanced photocatalytic hydrogen evolution

Novel MoS2-In2O3-WS2 (2D/3D/2D) ternary heterostructure nanocomposite material: Efficient photocatalytic degradation of antimicrobial agents under visible-light

Fabrication of ternary composited photocatalytic nanomaterials with strong interaction is vital to deriving the fast charge separation for efficient photodegradation of organic contaminants in wastewater under visible light. In this work, novel ternary 2D/3D/2D MoS2-In2O3-WS2 multi-nanostructures were synthesized using facile hydrothermal processes. XRD, FTIR, and XPS results confirmed the phase, functional groups, and element composition of pure MoS2, MoS2-In2O3, and MoS2-In2O3-WS2 hybrids. UV-DRS spectra of the MoS2-In2O3-WS2 ternary hybrid indicate maximum absorption in the visible light range with a band-gap energy value of 2.4 eV. The surface of the 2D WS2 nanosheet structure tightly blends and densely disperses 2D MoS2 nanosheets and 3D In2O3 nanocubes. This confirmed the formation of the MoS2-In2O3-WS2 ternary hybrid in the form of 2D/3D/2D multi-nanostructures, which is also indicated from SEM and HR-TEM images. The synthesized MoS2-In2O3-WS2 ternary hybrid showed maximum photocatalytic activity under visible-light for antimicrobial agents such as triclosan (TCS) and trichlorocarban (TCC). The photocatalytic activity of TCS was revealed to be 95% at 90 min, while that of TCC was 93% at 100 min. The reusability and stability tests of the prepared MoS2-In2O3-WS2 ternary hybrid after four consecutive photocatalytic cycles were analyzed by FTIR and SEM, which indicated that the prepared ternary hybrid was very stable. Overall results suggested that the developed MoS2-In2O3-WS2 (2D/3D/2D) multi-nanostructures are environmentally friendly and low-cost nanocomposites as a potential photocatalyst for the removal of antimicrobial agents from wastewater.

Synergistic effects of sulfur vacancies and internal electric fields in FeS/MoS2 heterojunctions: A new approach to photocatalytic chromium removal

Molybdenum disulfide (MoS2) is heralded as an exemplary two-dimensional (2D) functional material, largely attributed to its distinctive layered structure. Upon forming heterojunctions with reducing species, MoS2 displays remarkable photocatalytic properties. In this research, we fabricated a novel heterojunction photocatalyst, FeS/MoS2-0.05, through the integration of FeS with hollow MoS2. This composite aims at the efficient photocatalytic reduction of hexavalent chromium (Cr(VI)). A comprehensive array of characterization techniques unveiled that MoS2 flakes, dispersed on FeS, provide numerous active sites for photocatalysis at the heterojunction interface. The inclusion of FeS seemingly promotes the formation of sulfur vacancies on MoS2. Consequently, this heterojunction catalyst exhibits photocatalytic activity surpassing pristine MoS2 by a factor of 3.77. The augmented activity of the FeS/MoS2-0.05 catalyst is attributed chiefly to an internal electric field at the interface. This field enhances the facilitation of charge transfer and separation significantly. Density functional theory (DFT) calculations, coupled with experimental analyses, corroborate this observation. Additionally, DFT calculations indicate that sulfur vacancies act as pivotal sites for Cr(VI) adsorption. Significantly, the adsorption energy of Cr(VI) species shows enhanced favorability under acidic conditions. Our results suggest that the FeS/MoS2-0.05 heterojunction photocatalyst presents substantial potential for the remediation of Cr(VI)-contaminated wastewater.

Contact-Electro-Catalysis Through Electret Behavior to Facilitate Electron Transfer

Contact-electro-catalysis (CEC) usually uses polymer dielectrics as its catalysts under mechanical stimulation conditions, which although has a decent catalytic dye degradation effect still warrants performance improvement. A carrier separation promotion strategy based on an internal electric field by polarization can effectively improve ferroelectric material performance in photocatalysis and piezocatalysis. Therefore, carrier separation as a necessary process of CEC also can be promoted and is largely expected to improve CEC performance theoretically. However, the carrier separation enhancement by the internal electric field strategy has not been achieved in the CEC experiment yet, because of the difficulty of building an internal electric field in an inert polymer dielectric. Herein, a polytetrafluoroethylene (PTFE) dielectric was charged through an electret process, which was believed to establish an internal electric field for CEC catalysts proved by KPFM, XPS, and triboelectric nanogenerator voltage output analysis. The fastest degradation rate of methyl orange reached over 90% at 1.5 h, while the hydroxyl free radical (•OH) yield of the PTFE electret was nearly three times that of the original PTFE. Density functional theory (DFT) calculations verified that the potential barrier of interatomic electron transfer between PTFE and H2O was reduced by 37% under the internal electric field. The electret strategy used herein to optimize the PTFE catalyst provides a base for the use of other general plastics in CEC and facilitates the production of easily prepared, easily recyclable, and inexpensive polymer dielectric catalysts that can promote large-scale pollutant degradation via CEC.

Tuning Electrons Migration of Dual S Defects Mediated MoS2-x/ZnIn2S4-x Toward Highly Efficient Photocatalytic Hydrogen Production

Photocatalytic hydrogen production is a prevalent method for hydrogen synthesis. However, high recombination rate of photogenerated carriers and high activation energy barrier of H remain persistent challenge. Here, the two-step hydrothermal method is utilized to prepare dual S-defect mediated catalyst molybdenum sulfide/zinc indium sulfide (MSv/ZISv), which has high hydrogen production rate of 8.83 mmol g-1h-1 under simulated sunlight. The achieved rate is 21.91 times higher than pure ZnIn2S4 substrate. Defects in ZIS within MSv/ZISv modify the primitive electronic structure by creating defect state that retaining good reducing power, leading to the rapid separation of electron-hole pairs and the generation of additional photogenerated carriers. The internal electric field further enhances the migration toward to cocatalyst. Simultaneously, the defects introduced on the MoS2 cause electron rearrangement, leading to electron clustering on both S vacancies and edge S. Thereby MSv/ZISv exhibits the lowest activation energy barrier and |ΔGH*|. This work explores the division of synergies between different types of S defects, providing new insights into the coupling of defect engineering.

Recent progress in ZnCr and NiCr layered double hydroxides and based photocatalysts for water treatment and clean energy production

In pursuit of advancing photocatalysts for superior performance in water treatment and clean energy generation, researchers are increasingly focusing on layered double hydroxides (LDHs) which have garnered significant attention due to their customizable properties, morphologies, distinctive 2D layered structure and flexible options for modifying anions and cations. No review has previously delved specifically into ZnCr and NiCr LDH-based photocatalysts and therefore, this review highlights the recent surge in ZnCr and NiCr-based LDHs as potential photocatalysts for their applications in water purification and renewable energy generation. The structural and fundamental characteristics of layered double hydroxides and especially ZnCr-LDHs and NiCr-LDHs are outlined. Further, the various synthesis techniques for the preparation of ZnCr-LDHs, NiCr-LDHs and their composite and heterostructure materials have been briefly discussed. The applicability of ZnCr-LDH and NiCr-LDH based photocatalysts in tackling significant issues in water treatment and sustainable energy generation is the main emphasis of this review. It focuses on photocatalytic degradation of organic pollutants in wastewater, elucidating the principles and advancements for enhancing the efficiency of these materials. It also explores their role in H2 production through water splitting, conversion of CO2 into valuable fuels and NH3 synthesis from N2, shedding light on their potential for clean energy solutions. The insights presented herein offer valuable guidance for researchers working towards sustainable solutions for environmental remediation and renewable energy generation.

Integration of ohmic junction and step-scheme heterojunction for enhanced photocatalysis

A novel and efficient photocatalyst, Cu2WS4/MoS2-Au plasmonic Step-scheme (S-scheme) heterojunction, was constructed for the first time and applied to remove environmental pollutants. Among all the prepared photocatalysts, the. Cu2WS4/MoS2-Au-5 exhibited the highest catalytic activity with an 89.1% reduction efficiency for Cr6+ and a 98.7% oxidation efficiency for Benzophenone-1 (BP-1) under visible light irradiation. The Cu2WS4/MoS2-Au photocatalyst exhibits stable performance and efficient photocatalytic activity due to effective charge separation, enhanced light absorption from localized surface plasmon resonance (LSPR) of gold nanoparticles, and the formation of an S-scheme heterojunction with strong oxidation-reduction capabilities. In addition, through analysis of experiments and theoretical calculations, it is speculated that the Cu2WS4/MoS2-Au follows a typical S-scheme photogenerated carrier transferring mechanism, which is verified by the finite difference time domain simulation, the free radical quenching experiments, the electron paramagnetic resonance analysis and the simulated charge density distribution. More importantly, the simulations of the work function and charge density distribution confirm the built-in electric field and the ohmic junction have been established at the interfaces between the Cu2WS4 and MoS2 (Cu2WS4/MoS2) as well as the interface between MoS2 and Au (MoS2-Au), respectively. The built-in electric field and ohmic junction enable efficient separation of photogenerated electrons and holes, ensuring the superior catalytic oxidation and reduction activities of the Cu2WS4/MoS2-Au photocatalyst. Finally, we propose a photocatalytic mechanism for the Cu2WS4/MoS2-Au plasmonic S-scheme heterojunction based on experimental results and simulated calculations. The research results of this study are significance for the development of the plasmonic S-scheme photocatalytic system.

2D Bi2MoO6/Zn3V2O8 heterojunction photocatalyst for efficient photocatalytic reduction of CO2 to CO and CH4

Two-dimensional (2D) "face-to-face" heterojunctions promote interfacial charge transfer and separation in composite photocatalysts. Here, we report an efficient 2D/2D step-scheme (S-scheme) photocatalyst composed of Bi2MoO6/Zn3V2O8 (BMO/ZVO), which has been designed and prepared via the self-assembly of BMO and ZVO nanoflakes. The heterojunction with an optimized composition of 30% BMO/ZVO showed extended light absorption capacity and enhanced separation efficiency of photogenerated carriers. Density functional theory (DFT) calculation on work function and charge density revealed the presence of a built-in electric field at the interface region, which should facilitate the separation of photogenerated electron-hole pairs. This work showed that it is essential to select two photocatalysts with interlaced band arrangement and to fine-tune the heterojunction interface for the preparation of S-scheme heterojunctions to achieve high photocatalytic efficiency.

Constructing CoAl-LDO/MoO3-x S-scheme heterojunctions for enhanced photocatalytic CO2 reduction

Converting CO2 into chemicals and fuels by solar energy can alleviate global warming and solve the energy crisis. In this work, CoAl-LDO/MoO3-x (LDO/MO) composites were successfully prepared and achieved efficient CO2 reduction under visible light. The CoAl-layered double oxides (CoAl-LDO) evolved from CoAl-layered double hydroxide (CoAl-LDH) exhibited a more robust structure, broader light absorption, and improved CO2 adsorption ability. The local surface plasmon resonance (LSPR) effect excited by nonstoichiometric MoO3-x broadened the photo-response range of CoAl-LDO/MoO3-x. In addition, constructing step-scheme (S-scheme) heterojunctions could simultaneously optimize the migration mechanism of photogenerated electrons and holes, and retain carriers with strong redox ability. Therefore, the production rates of CO and CH4 on the optimal LDO/MO composite were 7 and 9 times higher than the pristine CoAl-LDH, respectively. This work hybridizes oxidation photocatalysts and LDO-based materials to optimize the charge separation and migration mechanisms, which guides the modification of LDO-based materials.

Fabricated ZnO@ZnIn2S4 S-scheme heterojunction photocatalyst for enhanced electron-transfer and CO2 reduction

Step-scheme (S-scheme) heterojunctions can efficiently promote the separation of photogenerated carriers while maintaining the strong oxidation/reduction ability of photocatalysts; thus, research attention on S-scheme heterojunctions is increasing year by year. In this study, the S-scheme ZnO@ZnIn2S4 (ZnO@ZIS) heterojunction was prepared successfully. Then, electron spin resonance (ESR) characterization was applied to prove the successful construction of the S-scheme heterojunction. Photoluminescence (PL), time-resolved photoluminescence (TRPL), and photoelectrochemical experiments have demonstrated efficient interfacial charge transport in ZnO@ZIS. Finally, the mechanism of CO2 activation and electron transport was investigated by in situ Fourier transform infrared spectroscopy (FT-IR) and discrete Fourier transform (DFT) calculation analysis. The 40-ZnO@ZIS composite showed the best activity under light, and its CO and CH4 yields reached 39.76 and 3.92 μmol∙g-1∙h-1, respectively. This study provides a solution for optimizing the photocatalytic reduction activity of semiconductor photocatalysts by constructing S-scheme heterojunction materials to improve the CO2 reduction capacity.

Enhancing photocatalytic overall water-splitting performance on dual-active-sites of the Co-P@MoS2 catalysts: a DFT study

The rational construction of photocatalysts possesses tremendous potential to solve the energy crisis and environmental pollution; however, designing a catalyst for solar-driven overall water-splitting remains a great challenge. Herein, we propose a new MoS2-based photocatalyst (Co-P@MoS2), which skillfully uses the cobalt (Co) atom to stimulate in-plane S atoms and employs the phosphorus (P) atom to stabilize the basal plane by forming the Co-P bands. Using density functional theory (DFT), it was found that oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) can occur at the P site and S2 site of the Co-P@MoS2, respectively, and the dual-active sites successfully makes a delicate balance between the adsorption and dissociation of hydrogen. Furthermore, the improved overall water-splitting performance of Co-P@MoS2 was verified by analyzing the results of the electron structure and the dynamics of photogenerated carries. It was found that the imbalance of electron transfer caused by the introduction of the Co atom was the main contributor to the catalytic activity of Co-P@MoS2. Our study broadens the idea of developing photocatalysts for the overall water-splitting.

Optimal Architecture of a Dual S-Scheme ZnIn2S4-ZnO-Al2O3 Heterosystem with High H2 Evolution Rate under Visible Light

In this study, dual S-scheme ZnIn₂S₄-Al₂O₃-ZnO (ZIS-Al-Zn) heterojunctions were produced by a facile, low cost, and rapid combustion technique. These heterojunctions accelerated the photocatalytic hydrogen production due to the multi-channel-promoted separation of photocarriers. By optimizing the content of the components, the synthesized ZIS-Al-Zn composite with 20 wt% of ZnIn₂S₄ and 30 wt% of Al₂O₃ in the ZIS-Al-Zn composite demonstrated the highest hydrogen production rate of 54.2 mmol g^-1 h^-1, which was nearly 11 and 8.30 times better than ZnO-Al₂O₃ and ZnO-ZnIn₂S₄ composites, respectively. The results of DRS, PL, EIS, LSV, and CV techniques showed the highest shift in the light absorption, rapid interfacial transfer, and quenched recombination of photocarriers over the ternary ZIS-Al-Zn composite than single and binary catalysts. The obtained results revealed the formation of a dual S-scheme mechanism of transfer of photocarriers in ZIS-Al-Zn heterojunctions, contributing to better hydrogen production efficiency. The optimized ZIS-Al-Zn composite also exhibited good stability and reusability.

Enhanced photocatalytic hydrogen evolution activity of co-catalyst free S-scheme polymer heterojunctions via ultrasonic assisted reorganization in solvent

In this work, two donor-acceptor linear conjugated polymers were designed and synthesized based on thianthrene-5,5,10,10-tetraoxide (TTO) as the acceptor unit, benzo[1,2-b:4,5-b']dithiophene derivative (Py1) and thiophene (Py2) as the donor units, respectively. The Py1/Py2 composite was prepared by physical ball milling of the two polymers in a mixture, which was further treated with a N-methyl-2-pyrrolidone (NMP)-assisted sonication treatment, and the obtained catalyst was named N-Py1/Py2. Compared with the single polymer or Py1/Py2, the FTIR characteristic peaks of O=S=O have a red shift for N-Py1/Py2, accompanied by a profound change in morphology. Furthermore, N-Py1/Py2 has a broader light response and more efficient separation and transport of charge carriers, and as a result it exhibits a higher photocatalytic hydrogen evolution rate (26.5 mmol g^-1 h^-1) without the involvement of any co-catalyst than Py1/Py2 catalyst (3.56 mmol g^-1 h^-1). The underlying mechanism for the enhanced photocatalytic activity by the sonication treatment in NMP is discussed based both on experimental and theoretical calculation data.

Layered Metal Oxide Nanosheets with Enhanced Interlayer Space for Electrochemical Deionization

Electrochemical deionization is regarded as one of the promising water treatment technologies. Here, CoAl-layered metal oxide nanosheets intercalated by sodium dodecyl sulfate (SDS) with an enhanced interlayer spacing from 0.76 to 1.33 nm are synthesized and used as an anode. The enlarged interlayer spacing provides an enhanced ion-diffusion channel and improves the utilization of the interlayer electroactive sites, while heat treatment, transferring layered double hydroxides to layered metal oxides (LMOs), offers additional active oxidation reaction sites to facilitate the electro-sorption rate, contributing to the high salt adsorption capacity (31.78 mg g^-1 ) and average salt adsorption rate (3.75 mg g^-1  min^-1 ) at 1.2 V in 500 mg L^-1 NaCl solution. In addition, the excellent long-term cycling stability (92.9%) after 40 cycles proves the strong electronic interaction between SDS and the host layer, which is validated by density functional theory calculations later on. Moreover, the electro-sorption mechanism of LMOs that originated from the reconstruction of the layered structure based on the "memory effect" is revealed according to the X-ray photoelectron spectroscopy peak shifts of Co element. This strategy of expanding the interlayer spacing combined with heat treatment makes LMOs a competitive candidate for electrochemical water deionization.

Interfacial intimacy and internal electric field modulated S-scheme Sv-ZnS/ZnIn2S4 photocatalyst for efficient H2 evolution and CO2 reduction

The construction of S-scheme heterojunctions is an effective approach to realize artificial photocatalytic processes. For the higher solar energy conversion efficiency, current research focuses on improving the interfacial intimacy and precisely modulating the strength of the internal electric field (IEF). To address this issue, we propose a novel MOF-based synthesis and derivation strategy. The heterojunction obtained by this strategy tends to form an intimate interface and a tunable IEF, which facilitates the transfer and separation of photogenerated carriers. Herein, a ZnS/ZnIn₂S₄ (ZIS) S-Scheme heterojunction containing sulfur vacancies (Sv) was successfully synthesized, and its good photocatalytic hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) activity confirmed the feasibility of this strategy. The prepared Sv-ZnS/ZIS exhibits an apparent quantum yield of 19.8 ± 1.0 % at 420 nm and a hydrogen evolution rate of 2912.3 ± 185.9 μmol g^-1h^-1, which is 9.0 and 33.6 times higher than pure ZIS and Sv-ZnS, respectively. Furthermore, the yield of photoreduction CO₂ to CO reaches 2075.7 ± 63.0 μmol g^-1h^-1 with a CO selectivity of 93.0 ± 0.8 %. This work provides new sights for the rational design and construction of S-scheme photocatalysts with sulfur vacancies for efficient photocatalysis.

Capacitive deionization of high concentrations of hexavalent chromium using nickel-ferric-layered double hydroxide/molybdenum disulfide asymmetric electrode

To decontaminate wastewater affected by high concentrations of aqueous hexavalent chromium (Cr(VI)) and improve the capability of layered double hydroxide (LDH) as an electrode in the capacitive deionization (CDI) process, nickel-ferric-LDH (NiFe-LDH) and NiFe-LDH/molybdenum disulfide (NiFe/MoS₂) were synthesized using a hydrothermal method. Characterization results indicated that the flower-like cluster framework of MoS₂ was decorated with the NiFe-LDH. Addition of MoS₂ improved the conductivity, capacitance reversibility, charge efficiency, coulombic efficiency, and stability of NiFe/MoS₂. The CDI performance of aqueous Cr(VI) was evaluated using NiFe/MoS₂ and activated carbon as the anode and cathode, respectively. The process reached equilibrium within 240 min. The deionization capacity and removal ratio for Cr(VI) (100 mg/L, 100 mL) were 49.71 mg/g and 99.42 %, respectively, at 1.2 V and 20 mL/min. The isothermal data were accurately described using the Langmuir model, and the theoretical maximum deionization capacity of NiFe/MoS₂ for Cr(VI) was 106.2 mg/g. The interaction mechanisms included electrostatic attraction, surface complexation, and reduction. These findings indicate that NiFe/MoS₂ has feasible applications in practical wastewater treatment for Cr(VI) removal.

1D CdS modified 3D zinc cobalt oxide heterojunctions boost solar-driven photocatalytic performance

In the process of photocatalysis, semiconductor materials generate photogenerated electrons and photogenerated holes when excited by sunlight, so as to participate in the process of photocatalytic decomposition of water to produce hydrogen.

Compatibility and Photocatalytic Capacity of the Novel Core@shell Nanospheres in Cementitious Composites

In this paper, a novel core@shell nanosphere (TiO2@CoAl-LDH) based on layered double hydroxide (LDH) combined with a nano-TiO2 semiconductor was synthesized and introduced to cementitious materials via spraying technology and a smearing method. The compatibility with a cementitious matrix and the effects of TiO2@CoAl-LDH on cement hydration, surface microstructure, and the microscopic mechanical properties of mortar were investigated by AFM, microhardness testing, FESEM, and BET analysis. Meanwhile, the effects of TiO2@CoAl-LDH introduction methods on the photocatalytic performance and durability of the photocatalyst were systematically evaluated by methylene blue (MB) removal ratio and wear testing. The results show that TiO2@CoAl-LDH exhibits enhanced compatibility with cementitious matrices and a higher photocatalytic capacity than individual CoAl-LDH and nano-TiO2. The photocatalytic mortar prepared via spraying technology (CM-C) displays a higher photocatalytic capacity than that prepared via the smearing method (CM-S). Among them, the mortar with two layers of photocatalytic coatings (CM-C2) has the highest MB removal ratio, which reached 95.1% within 120 min of UV-visible light irradiation. While on the other hand, the wear test revealed that the smeared mortar has a higher photocatalytic capacity and better photocatalyst durability than the sprayed mortar. This work is expected to contribute to the development of multifunctional sustainable building materials.

Comparative Study of M(Ⅱ)Al (M=Co, Ni) Layered Double Hydroxides for Silicone Foam: Characterization, Flame Retardancy, and Smoke Suppression

To compare the different actions of the two representative transition metal cations of Co²⁺ and Ni²⁺ in layered double hydroxides (LDHs), CoAl-LDH and NiAl-LDH intercalated with CO₃²⁻ were synthesized, and the chemical structures, microstructures, and surface areas thereof were successfully characterized. Then, the two LDHs were utilized as flame retardants and smoke suppressants for silicone foam (SiF). The densities, flame retardancy, smoke suppression, thermal stabilities, and compressive strengths of the two SiF/LDHs nanocomposites were investigated. The introduction of LDHs slightly decreased the density of SiF due to the catalytic actions of Co and Ni during the foaming process of SiF. With respect to the flame retardancy, the addition of only 1 phr of either CoAl-LDH or NiAl-LDH could effectively improve the limiting oxygen index of SiF from 28.7 to 29.6%. Based on the results of vertical flame testing and a cone calorimeter test, the flame retardancy and fire safety of the SiF were effectively enhanced by the incorporation of LDHs. In addition, owing to the good catalytic action and large specific surface area (NiAl-LDH: 174.57 m² g⁻¹; CoAl-LDH: 51.47 m² g⁻¹), NiAl-LDH revealed higher efficiencies of flame retardancy and smoke suppression than those of CoAl-LDH. According to the results of energy-dispersive X-ray spectroscopy, Co and Ni participated in the formation of protective char layers, which inhibited the release of SiO₂ into the gas phase. Finally, the influences on the thermal decomposition and compressive strength for SiF resulting from the addition of LDHs are discussed.

Recent trends in layered double hydroxides based electrochemical and optical (bio)sensors for screening of emerging pharmaceutical compounds

The rapid expansion of the human population has given rise to new environmental and biomedical concerns, contributing to different advancements in the pharmaceutical industry. In the field of analytical chemistry over the last few years, layered double hydroxides (LDHs) have drawn significant attention, owing to their extraordinary properties. Furthermore, the novel advancement of LDH-based optical and electrochemical platforms to detect different pharmaceutical materials has acquired substantial attention because of their outstanding specificity, actual-time controlling, and user-friendliness. This review aims to recapitulate advanced LDHs-based optical and electrochemical sensors and biosensors to identify and measure important pharmaceutical compounds, such as anti-depressant, anti-inflammatory, anti-viral, anti-bacterial, anti-cancer, and anti-fungal drugs. Additionally, fundamental parameters, namely interactions between sensor and analyte, design rationale, classification, selectivity, and specificity are considered. Finally, the development of high-efficiency techniques for optical and electrochemical sensors and biosensors is featured to deliver scientists and readers a complete toolbox to identify a broad scope of pharmaceutical substances. Our goals are: (i) to elucidate the characteristics and capabilities of available LDHs for the identification of pharmaceutical compounds; and (ii) to deliver instances of the feasible opportunities that the existing devices have for the developed sensing of pharmaceuticals regarding the protection of ecosystems and human health at the global level.

Superlative photoelectrochemical properties of 3D MgCr-LDH nanoparticles influencing towards photoinduced water splitting reactions

In the present work, we report the synthesis of single system three-dimensional (3D) open porous structure of MgCr-LDH nanoparticles in a substrate-free path by using one-step formamide assisted hydrothermal reaction followed by visible light irradiation for significant photoelectrochemical (PEC) properties that manifest towards photocatalytic H₂ and O₂ production. The as-prepared nanostructured materials were characterized by various physico-chemical characterization techniques. Moreover, this unique synthetic approach produces 3D open porous network structure of MgCr-LDH nanoparticles, which were formed by stacking of numerous 2D nanosheets, for effective light harvestation, easy electronic channelization and unveil superlative PEC properties, including high current density (6.9 mA/cm²), small Tafel slope of 82 mV/decade, smallest arc of the Nyquist plot (59.1 Ω cm⁻²) and photostability of 6000 s for boosting water splitting activity. In addition, such perfectly self-stacked 2D nanosheets in 3D MgCr-LDH possess more surface active defect sites as enriched 50% oxygen vacancy resulting a good contact surface within the structure for effective light absorption along with easy electron and hole separation, which facilitates the adsorption of protons and intermediate for water oxidation. Additionally, the Cr³⁺ as dopant pull up the electrons from water oxidation intermediates, thereby displaying superior photocatalytic H₂ and O₂ production activity of 1315 μmol/h and 579 μmol/h, respectively. Therefore, the open 3D morphological aspects of MgCr-LDH nanoparticles with porous network structure and high surface area possess more surface defect sites for electron channelization and identified as distinct novel features of this kind of materials for triggering significant PEC properties, along with robustly enhance the photocatalytic water splitting performances.

In-situ construction of step-scheme MoS2/Bi4O5Br2 heterojunction with improved photocatalytic activity of Rhodamine B degradation and disinfection

In this paper, a novel Step-scheme MoS₂/Bi₄O₅Br₂ heterojunction was fabricated through the in-situ mechanical agitation method and the photocatalytic activity of that was examined by the photocatalytic degradation Rhodamine B (RhB) and inactivation of E.coli under visible light irradiation (λ > 420 nm). The Step-scheme MoS₂/Bi₄O₅Br₂ heterojunctions displayed the enhanced photocatalytic ability compared to pure Bi₄O₅Br₂ and MoS₂ and the MoS₂/Bi₄O₅Br₂-3% (MS/BOB-3) heterojunction exhibited the strongest photocatalytic activity which can completely inactivate the 1 × 10⁷ cfu/mL with 180 min and degrade RhB (10 mg/L) with 24 min visible light irradiation, respectively. The photocatalytic mechanism of the MoS₂/Bi₄O₅Br₂ heterojunction is was attributed to the generated active species (h⁺, ·O₂^- and ·OH) which can effectively destroy RhB molecular and cell-membrane of bacterial as demonstrated by multiple techniques such as LC-MS and fluorescence stain. Additionally, characterization results disclosed that the transfer pathway of charge carriers of constructed MoS₂/Bi₄O₅Br₂ heterojunction followed the Step-scheme channel, which not only facilitated the separation and migration of the photo-generated charge carriers, but also improved the light absorption ability of the samples and resulting in the promoted photocatalytic performance of MoS₂/Bi₄O₅Br₂ heterojunction. This work paves a new idea to develop novel bismuth oxyhalide-based photocatalytic system for wastewater purification.

Wool-Based Carbon Fiber/MoS2 Composite Prepared by Low-Temperature Catalytic Hydrothermal Method and Its Application in the Field of Gas Sensors

Under the background of the Paris Agreement on reducing greenhouse gases, waste wools were converted into wool carbon fiber (WCF) and WCF-MoS2 composites by low-temperature catalytic hydrothermal carbonization. Their structures and gas-sensing performances were studied for the first time. Due to the existence of heterojunctions, the responses of the WCF-MoS2 composite to the five analytes were 3-400 times those of MoS2 and 2-11 times those of WCF. Interestingly, because of the N, P, and S elements contained in wools, the WCF prepared by the hydrothermal method was realized the doping of N, P, and S, which caused the sensing curves of WCF to have different shapes for different analytes. This characteristic was also well demonstrated by the WCF-MoS2 composite, which inspired us to realize the discriminative detection only by a single WCF-MoS2 sensor and image recognition technology. What's more, the WCF-MoS2 composite also showed a high sensitivity, a high selectivity, and a rapid response to NH3. The response time and the recovery time to 3 ppm NH3 were about 16 and 5 s, respectively. The detection of limit of WCF-MoS2 for NH3 was 19.1 ppb. This work provides a new idea for the development of sensors and the resource utilization of wool waste.

Research progress on photocatalytic reduction of CO2 based on LDH materials

Converting CO₂ to renewable fuels or valuable carbon compounds is an effective way to solve the global warming and energy crisis. Compared with other CO₂ conversion methods, photocatalytic reduction of CO₂ is more energy-saving, environmentally friendly, and has a broader application prospect. Layered double hydroxide (LDH) has attracted widespread attention as a two-dimensional material, composed of metal hydroxide layers, interlayer anions and water molecules. This review briefly introduces the basic theory of photocatalysis and the mechanism of CO₂ reduction. The composition and properties of LDH are introduced. The research progress on LDH in the field of photocatalytic reduction of CO₂ is elaborated from six aspects: directly as a catalyst, as a precursor for a catalyst, and by modification, intercalation, supporting with other materials and construction of a heterojunction. Finally, the development prospects of LDH are put forward. This review could provide an effective reference for the development of more efficient and reasonable photocatalysts based on LDH.

Emerging S-Scheme Photocatalyst

Photocatalysis is a green technology to use ubiquitous and intermittent sunlight. The emerging S-scheme heterojunction has demonstrated its superiority in photocatalysis. This article covers the state-of-the-art progress and provides new insights into its general designing criteria. It starts with the challenges confronted by single photocatalyst from the perspective of energy dissipation by borrowing the common behaviors in the dye molecule. Subsequently, other problems faced by single photocatalyst are summarized. Then a viable solution for these problems is the construction of heterojunctions. To overcome the problems and mistakes of type-II and Z-scheme heterojunctions, S-scheme heterojunction is proposed and the underlying reaction mechanism is summarized. Afterward, the design principles for S-scheme heterojunction are proposed and four types of S-scheme heterojunctions are suggested. Following this, direct characterization techniques for testifying the charge transfer in S-scheme heterojunction are presented. Finally, different photocatalytic applications of S-scheme heterojunctions are summarized. Specifically, this work endeavors to clarify the critical understanding on curved Fermi level in S-scheme heterojunction interface, which can help strengthen and advance the fundamental theories of photocatalysis. Moreover, the current challenges and prospects of the S-scheme heterojunction photocatalyst are critically discussed.

Dual plasmonic Au and TiN cocatalysts to boost photocatalytic hydrogen evolution

Employing a suitable cocatalyst is very important to improve photocatalytic H2 evolution activity. Herein, two plasmonic cocatalysts, Au nanoparticles and TiN nanoparticles were in-situ coupled over the g-C3N4 nanotube to form a ternary 0D/0D/1D Au/TiN/g-C3N4 composite via a successive thermal polycondensation and chemical reduction method. The g-C3N4 nanotube acted as a support for the growth of Au and TiN nanoparticles, leading to intimate contact between g-C3N4 nanotube with Au nanoparticles and TiN nanoparticles. As a result, multiple interfaces and dual-junctions of Au/g-C3N4 Schottky-junction and TiN/g-C3N4 ohmic-junction were constructed, which helped to promote the charged carriers' separation and enhanced the photocatalytic performance. Furthermore, loading plasmonic cocatalysts of Au nanoparticles and TiN nanoparticles can enhance the light absorption capacity. Consequently, the Au/TiN/g-C3N4 composite exhibited significantly enhanced photocatalytic H2 evolution activity (596 μmol g-1 h-1) compared to g-C3N4 or binary composites of Au/g-C3N4 and TiN/g-C3N4. This work highlights the significant role of cocatalysts in photocatalysis.

Construction of Bi2WO6/CoAl-LDHs S-scheme heterojunction with efficient photo-Fenton-like catalytic performance: Experimental and theoretical studies

The photo-Fenton-like catalytic process has shown great application potential in environmental remediation. Herein, a novel photo-Fenton-like catalyst of Bi₂WO₆ nanosheets decorated hortensia-like CoAl-layered double hydroxides (Bi₂WO₆/CoAl-LDHs) was synthesized via hydrothermal process. The optimized Bi₂WO₆/CoAl-LDHs composite performed the high-efficiency photo-Fenton-like catalytic performance for oxytetracycline (OTC) removal (98.47%) in the mediation of visible-light and H₂O₂. The comparative experiment, technical characterization and density functional theory calculation results indicated that the efficient photo-Fenton-like catalytic performance of Bi₂WO₆/CoAl-LDHs was attributed to the synergistic action of the Fenton-like process of cobalt ions in CoAl-LDHs, an internal electric field and the S-scheme heterojunction form between Bi₂WO₆ and CoAl-LDHs, which could significantly promote the active substance formation and the photocatalytic process in the catalytic system. This study will stimulate the new inspiration of designing the efficient catalytic system for environmental remediation and other fields.

Rational construction of Ag3PO4/WO3 step-scheme heterojunction for enhanced solar-driven photocatalytic performance of O2 evolution and pollutant degradation

Heterojunction engineering has been regarded as a promising strategy to sufficiently utilizing photogenerated charge carriers, thus benefiting the improvement of photocatalytic performance. Herein, Ag₃PO₄/WO₃ S-scheme heterojunction was synthesized via a simple deposition-precipitation process, and its photocatalytic activity was evaluated by monitoring water splitting and pollutant degradation under visible light. As a result, Ag₃PO₄/WO₃ with optimized ratio photocatalyst showed enhanced photocatalytic activity in oxygen production (306.6 μmol·L^-1·h^-1) relative to pure Ag₃PO₄ (204.4 μmol·L^-1·h^-1). Additionally, it also exhibits rapid toxicity elimination efficiency over hexavalent chromium ions (Cr⁶⁺) and ciprofloxacin (CIP) with degrading rate of 72% and 83% within 30 min, respectively. According to a series characterization, a possible S-scheme photocatalytic mechanism of Ag₃PO₄/WO₃ was demonstrated in detail, which endowed the heterojunction with strong redox abilities to provide powerful diving force towards the photocatalytic reaction. This work presents an innovative perspective to construct Ag₃PO₄-based S-scheme heterojunctions for boosting photocatalytic performance for various applications.

CuS/Ag2O nanoparticles on ultrathin g-C3N4 nanosheets to achieve high performance solar hydrogen evolution

Ternary heterostructures play a crucial role in improving the separation of charge carriers and fast surface reaction kinetics, which in turn helps in understanding the effective photocatalytic water splitting performance. Herein, CuS/Ag₂O nanoparticles were presented on a graphitic carbon nitride (g-C₃N₄) surface to obtain CuS/Ag₂O/g-C₃N₄ material using facile hydrothermal and precipitation methods. Structural and morphological studies confirmed the presence of ternary nanostructures comprising CuS, Ag₂O, and g-C₃N₄ with nanoparticle and nanosheet morphologies. The as-synthesized CuS/Ag₂O/g-C₃N₄ exhibited a remarkable photocatalytic H₂ production of 1752 µmol.h^-1.g^-1_cat, which is considerably superior than those of CuS and g-C₃N₄. The improved H₂ production performance which is due to the effective interfacial CuS/Ag₂O/g-C₃N₄ heterojunction interface and superior hole (h⁺) trapping capability of the CuS at the CuS/Ag₂O/g-C₃N₄ interface. This can efficiently enhance the lifetime of photoexcited charge carriers and enhance the electron density for the production of H₂. The optimum CuS/Ag₂O/g-C₃N₄ heterostructure remained stable after 8 successive experimental cycles, although with a slight change in the H₂ production rate. Therefore, this study offers a novel approach to exploit the efficacy through the synergetic effect of integrating CuS as the photocatalyst and Ag₂O as the visible sensitizer, thus proposing a viable strategy of using earth-abundant material to enhance the conversion of solar energy to fuel.

Molybdenum disulfide loading on a Z-scheme graphitic carbon nitride and lanthanum nickelate heterojunction for enhanced photocatalysis: Interfacial charge transfer and mechanistic insights

Interfacial design and the co-catalyst effect are considered to be effective to achieve separation and transport of photogenerated carriers in composite photocatalysts. In this study, a Z-scheme heterojunction was successfully combined with a co-catalyst to achieve a highly efficient LaNiO₃/g-C₃N₄/MoS₂ photocatalyst. MoS₂ flakes were loaded on a hybrid material surface, which was formed by LaNiO₃ nanocubes embedded on layered g-C₃N₄, and a good heterostructure with multiple attachment sites was obtained. Experimental studies confirmed that the Z-scheme heterojunction completely preserves the strong redox ability of the photogenerated electrons and holes. As a cocatalyst, MoS₂ further promoted interfacial charge separation and transport. The synergistic effect of the Z-scheme heterojunction and co-catalyst effectively realized the transfer of photogenerated carriers from "slow transfer" to "high transfer" and promoted water decomposition and pollutant degradation. Results revealed that under simulated sunlight irradiation, LaNiO₃/g-C₃N₄/MoS₂ composites exhibit superior hydrogen evolution of 45.1 μmol h^-1, which is 19.1 times that of g-C₃N₄ and 4.9 times that of LaNiO₃/g-C₃N₄, respectively. Moreover, the LaNiO₃/g-C₃N₄/MoS₂ Z-scheme photocatalyst exhibited excellent photocatalytic performance for antibiotic degradation and heavy-metal ion reduction under visible light. This study might provide some insights into the development of photocatalysts for solar energy conversion and environmental remediation.

Self-assembled Transition Metal Chalcogenides@CoAl-LDH 2D/2D Heterostructures with Enhanced Photoactivity for Hydrogen Evolution

Transition metal chalcogenides (TMCs) have been well-established as ideal low-dimensional systems for photocatalytic hydrogen evolution. Strategies toward improving the activity of these TMCs photocatalysts by crafting heterostructures have been intensively...

Nano-flower S-scheme heterojunction NiAl-LDH/MoS2 for enhancing photocatalytic hydrogen production

The construction of heterojunctions can effectively improve the electron transport rate and photocatalytic activity.

Atomic scaled modulation strategies and crystal phase transition of flower-like CoAl layered double hydroxide for supercapacitor

In the present work, cobalt aluminum layered double hydroxide and its derivatives were synthesized via hydrothermal method, alkali-etching method and phosphorization route to obtain different crystal phases. The structure, morphology...

Construction of UiO-66/Bi4O5Br2 Type-II Heterojunction to Boost Charge Transfer for Promoting Photocatalytic CO2 Reduction Performance

One of the basic challenges of CO₂ photoreduction is to develop efficient photocatalysts, and the construction of heterostructure photocatalysts with intimate interfaces is an effective strategy to enhance interfacial charge transfer for realizing high photocatalytic activity. Herein, a novel UiO-66/Bi₄O₅Br₂ heterostructure photocatalyst was constructed by depositing UiO-66 nanoparticles with octahedral morphology over the Bi₄O₅Br₂ nanoflowers assembled from the Bi₄O₅Br₂ nanosheets via an electrostatic self-assembly method. A tight contact interface and a built-in electric field were formed between the UiO-66 and the Bi₄O₅Br₂, which was conducive to the photo-electrons transfer from the Bi₄O₅Br₂ to the UiO-66 and the formation of a type-II heterojunction with highly efficient charge separation. As a result, the UiO-66/Bi₄O₅Br₂ exhibited improved photocatalytic CO₂ reduction performance with a CO generation rate of 8.35 μmol h⁻¹ g⁻¹ without using any sacrificial agents or noble co-catalysts. This work illustrates an applicable tactic to develop potent photocatalysts for clean energy conversion.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

CdIn2S4/In(OH)3/NiCr-LDH Multi-Interface Heterostructure Photocatalyst for Enhanced Photocatalytic H2 Evolution and Cr(VI) Reduction

The development of highly active and stable photocatalysts, an effective way to remediate environment pollution and alleviate energy shortages, remains a challenging issue. In this work, a CdIn2S4/In(OH)3 nanocomposite was deposited in-situ on NiCr-LDH nanosheets by a simple hydrothermal method, and the obtained CdIn2S4/In(OH)3/NiCr-LDH heterostructure photocatalysts with multiple intimate-contact interfaces exhibited better photocatalytic activity. The photocatalytic H2 evolution rate of CdIn2S4/In(OH)3/NiCr-LDH increased to 10.9 and 58.7 times that of the counterparts CdIn2S4 and NiCr-LDH, respectively. Moreover, the photocatalytic removal efficiency of Cr(VI) increased from 6% for NiCr-LDH and 75% for CdIn2S4 to 97% for CdIn2S4/In(OH)3/NiCr-LDH. The enhanced photocatalytic performance was attributed to the formation of multi-interfaces with strong interfacial interactions and staggered band alignments, which offered multiple pathways for carrier migration, thus promoting the separation efficiency of photo-excited electrons and holes. This study demonstrates a facile method to fabricate inexpensive and efficient heterostructure photocatalysts for solving environmental problems.

Peroxymonosulfate activation through 2D/2D Z-scheme CoAl-LDH/BiOBr photocatalyst under visible light for ciprofloxacin degradation

The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation has been widely applied in the field of sewage treatment. In this work, we synthesized a two-dimensional/two-dimensional (2D/2D) CoAl-LDH/BiOBr Z-scheme photocatalyst via a simple method. Then, multiple detection results demonstrated that CoAl-LDH was successfully anchored onto BiOBr, as well as formed an intimate interaction. Moreover, the photocatalytic degradation performance of the catalysts/PMS/vis system had been explored under several conditions (e.g., different catalyst doses, PMS doses, anions and pollutants). The 8 wt% CoAl-LDH/BiOBr composite exhibited the highest degradation efficiency (96%) of ciprofloxacin (CIP). In addition, radicals quenching experiments and electron paramagnetic resonance (EPR) indicated that •O₂- and ¹O₂ were the primary radicals for CIP degradation. The photoelectrochemical measurement and photoluminescence (PL) confirmed that 8 wt% CoAl-LDH/BiOBr exhibited the highest separation and transfer rate of charge carriers. The liquid chromatography-mass spectrometer (LC-MS) analysis revealed that oxidation of the piperazine ring and defluorination were the main CIP degradation pathways. Density functional theory (DFT) calculation, including the laplacian bond order (LBO) and Fukui index, which was consistent with the results of LC-MS. This study explained the superiority of the synergistic effect between photocatalysis and PMS activation on the degradation of pollutants.