Cell delivery in regenerative medicine: the cell sheet engineering approach

Human platelet lysate-cultured adipose-derived stem cell sheets promote angiogenesis and accelerate wound healing via CCL5 modulation

BACKGROUND

A rising population faces challenges with healing-impaired cutaneous wounds, often leading to physical disabilities. Adipose-derived stem cells (ASCs), specifically in the cell sheet format, have emerged as a promising remedy for impaired wound healing. Human platelet lysate (HPL) provides an attractive alternative to fetal bovine serum (FBS) for culturing clinical-grade ASCs. However, the potential of HPL sheets in promoting wound healing has not been fully investigated. This study aimed to explore the anti-fibrotic and pro-angiogenic capabilities of HPL-cultured ASC sheets and delve into the molecular mechanism.

METHODS

A rat burn model was utilized to evaluate the efficacy of HPL-cultured ASC sheets in promoting wound healing. ASC sheets were fabricated with HPL, and those with FBS were included for comparison. Various analyses were conducted to assess the impact of HPL sheets on wound healing. Histological examination of wound tissues provided insights into aspects such as wound closure, collagen deposition, and overall tissue regeneration. Immunofluorescence was employed to assess the presence and distribution of transplanted ASCs after treatment. Further in vitro studies were conducted to decipher the specific factors in HPL sheets contributing to angiogenesis.

RESULTS

HPL-cultured ASC sheets significantly accelerated wound closure, fostering ample and organized collagen deposition in the neo-dermis. Significantly more retained ASCs were observed in wound tissues treated with HPL sheets compared to the FBS counterparts. Moreover, HPL sheets mitigated macrophage recruitment and decreased subsequent wound tissue fibrosis in vivo. Immunohistochemistry also indicated enhanced angiogenesis in the HPL sheet group. The in vitro analyses showed upregulation of C-C motif chemokine ligand 5 (CCL5) and angiogenin in HPL sheets, including both gene expression and protein secretion. Culturing endothelial cells in the conditioned media compared to media supplemented with CCL5 or angiogenin suggested a correlation between CCL5 and the pro-angiogenic effect of HPL sheets. Additionally, through neutralizing antibody experiments, we further validated the crucial role of CCL5 in HPL sheet-mediated angiogenesis in vitro.

CONCLUSIONS

The present study underscores CCL5 as an essential factor in the pro-angiogenic effect of HPL-cultured ASC sheets during the wound healing process. These findings highlight the potential of HPL-cultured ASC sheets as a promising therapeutic option for healing-impaired cutaneous wounds in clinical settings. Furthermore, the mechanism exploration yields valuable information for optimizing regenerative strategies with ASC products.

BRIEF ACKNOWLEDGMENT

This research was supported by the National Science and Technology Council, Taiwan (NSTC112-2321-B-002-018), National Taiwan University Hospital (111C-007), and E-Da Hospital-National Taiwan University Hospital Joint Research Program (111-EDN0001, 112-EDN0002).

Recent Advances in the Degradability and Applications of Tissue Adhesives Based on Biodegradable Polymers

In clinical practice, tissue adhesives have emerged as an alternative tool for wound treatments due to their advantages in ease of use, rapid application, less pain, and minimal tissue damage. Since most tissue adhesives are designed for internal use or wound treatments, the biodegradation of adhesives is important. To endow tissue adhesives with biodegradability, in the past few decades, various biodegradable polymers, either natural polymers (such as chitosan, hyaluronic acid, gelatin, chondroitin sulfate, starch, sodium alginate, glucans, pectin, functional proteins, and peptides) or synthetic polymers (such as poly(lactic acid), polyurethanes, polycaprolactone, and poly(lactic-co-glycolic acid)), have been utilized to develop novel biodegradable tissue adhesives. Incorporated biodegradable polymers are degraded in vivo with time under specific conditions, leading to the destruction of the structure and the further degradation of tissue adhesives. In this review, we first summarize the strategies of utilizing biodegradable polymers to develop tissue adhesives. Furthermore, we provide a symmetric overview of the biodegradable polymers used for tissue adhesives, with a specific focus on the degradability and applications of these tissue adhesives. Additionally, the challenges and perspectives of biodegradable polymer-based tissue adhesives are discussed. We expect that this review can provide new inspirations for the design of novel biodegradable tissue adhesives for biomedical applications.

bFGF-releasing biodegradable nanoparticles for effectively engrafting transplanted hepatocyte sheet

Hepatic tissue engineering has been applied for the treatment of intractable liver diseases, and hepatocyte sheets are promising for this purpose. However, hepatocyte sheets have poor survival after transplantation because of their high metabolic activity. In this study, we aimed to develop basic fibroblast growth factor (bFGF)-releasing nanoparticles to prolong the survival of hepatocyte sheets after transplantation. The nanoparticles were prepared by electrospraying a bFGF-dispersed poly(D,l-lactide-co-glycolide) emulsion. bFGF-loaded PLGA nanoparticles can be developed by optimizing the applied electrospray voltage and the oil:water ratio of the emulsion. The prepared nanoparticles exhibited prompt release at the initial duration and continuous gradual release at the subsequent duration. Hepatocyte sheet engraftment was evaluated by transplanting hepatocyte sheets containing the prepared nanoparticles into rats. The hepatocyte sheets with the prepared nanoparticles exhibited longer survival than those without the bFGF nanoparticles or solution owing to the local and continuous release of bFGF from the nanoparticles and the subsequent enhanced angiogenesis at the transplantation site. These results indicated that the prepared bFGF-releasing nanoparticles can enhance the efficiency of hepatocyte sheet transplantation. The developed bFGF-releasing nanoparticles would be useful for the transplantation of cellular tissue with post-transplantation survival challenges.

Transplantation of hybrid adipose-derived stem cell sheet with autologous peritoneum: An in vivo feasibility study

Introduction

In regenerative medicine, cell sheet engineering has various advantages, including the retention of cells at the transplantation site for a longer period and the local delivery of growth factors and cytokines. Adipose-derived stem cell (ASC) is widely used owing to their various functions such as wound healing, immunomodulation, and nerve regeneration, in addition to their ability to differentiate into adipocytes, chondrocytes, and osteoblasts. ASC sheet generated using cell sheet engineering is considered effective in preventing anastomotic leakage, a serious postoperative complication in gastrointestinal surgery. However, the ASC sheet is too soft, thin, and brittle to handle with laparoscopic forceps during the operation. Therefore, we considered using the peritoneum, which is stiff and easy to collect while operating, as an alternative support. In this study, we explored the feasibility of using the peritoneum as a support for the precise transplantation of ASC sheets during surgery.

Methods

ASCs were isolated from the subcutaneous fat of the inguinal region of Sprague-Dawley (SD) transgenic rats expressing green fluorescent protein. ASCs were cultured until passage 3, seeded in temperature-responsive culture dishes, and the resulting ASC sheet was harvested at more than 80% confluency. Non-transgenic SD rats were used for transplant experiments. The wall peritoneum was harvested from SD rats following laparotomy, and hybrid adipose-derived stem cell (HASC) sheet was prepared by laminating the peritoneum with ASC sheet. The cell sheets were transplanted on the backs of SD rats following the incision. On post-transplantation days 3 and 7, the specimens were extracted. ASC and HASC sheets were then compared macroscopically and histopathologically.

Results

HASC sheet transplantation was macroscopically and histopathologically more effective than ASC sheet transplantation. The peritoneum provided sufficient stiffness as a support for precise transplantation.

Conclusion

The newly developed HASC sheet, which combine the advantages of ASC sheet with those of the peritoneum, could be more useful for clinical application than the ASC sheet alone.

The Proangiogenic Potential of Rat Adipose-Derived Stromal Cells with and without Cell-Sheet Induction: A Comparative Study

A functional vasculature for survival remains a challenge for tissue regeneration, which is indispensable for oxygen and nutrient supply. Utilizing mesenchymal stromal cells (MSCs) to alleviate tissue ischemia and repair dysfunctional or damaged endothelium is a promising strategy. Compared to other populations of MSCs, adipose-derived stromal cells (ASCs) possess a more significant proangiogenic potential and are abundantly available. Cell sheet technology has recently been widely utilized in bone engineering. Compared to conventional methods of seeding seed cell suspension onto biological scaffolds, cell sheet technology prevents cell loss and preserves the extracellular matrix (ECM). Nevertheless, the proangiogenic potential of ASC sheets remains unknown. In this study, rat ASC sheets were constructed, and their macro- and microstructures were examined. In addition, we investigated the effects of ASCs and ASC sheets on the biological properties and angiogenic capacity of endothelial cells (ECs). The results demonstrated that the ASC sheets gradually thickened as the number of cells and ECM increased over time and that the cells were in an active state of secretion. Similar to ASC-CM, the conditioned medium (CM) of ASC sheets could significantly enhance the proliferative capacity of ECs. ASC sheet-CM has significant advantages over ASC-CM in promoting the migration and angiogenesis of ECs, where the exosomes secreted by ASC sheets play an essential role. Therefore, using ASC sheets for therapeutic tissue and organ regeneration angiogenesis may be a valuable strategy.

Enhancement of Lymphangiogenesis by Human Mesenchymal Stem Cell Sheet

Preparation of human mesenchymal stem cell (hMSC) suspension for lymphedema treatment relies on conventional enzymatic digestion methods, which severely disrupts cell-cell and cell-extracellular matrix (ECM) connections, and drastically impairs cell retention and engraftment after transplantation. The objective of the present study is to evaluate the ability of hMSC-secreted ECM to augment lymphangiogenesis by using an in vitro coculturing model of hMSC sheets with lymphatic endothelial cells (LECs) and an in vivo mouse tail lymphedema model. Results demonstrate that the hMSC-secreted ECM augments the formation of lymphatic capillary-like structure by a factor of 1.2-3.6 relative to the hMSC control group, by serving as a prolymphangiogenic growth factor reservoir and facilitating cell regenerative activities. hMSC-derived ECM enhances MMP-2 mediated matrix remodeling, increases the synthesis of collagen IV and laminin, and promotes lymphatic microvessel-like structure formation. The injection of rat MSC sheet fragments into a mouse tail lymphedema model confirms the benefits of the hMSC-derived ECM by stimulating lymphangiogenesis and wound closure.

Tubular Cardiac Tissue Bioengineered from Multi-Layered Cell Sheets for Use in the Treatment of Heart Failure

This chapter describes a method for creating tubular cardiac tissue in vitro. Thick cardiac tissue in a tubular configuration is prepared by stacking cell sheets stepwise on the inner wall of a segment of small intestine, which functions as a blood vessel bed. The capillaries of the small intestinal segment are fed by an artery and drained by a vein. Therefore, perfusion culture of the cardiac tissue is achieved by continuously infusing culture medium into the arterial vessel that supplies the segment of small intestine. The aim of this technique is to fabricate tubular cardiac tissue that can function as a pump by sequentially implanting and culturing cardiac cell sheets on the inner wall of a perfused segment of small intestine.

Strategies for improving adipose-derived stem cells for tissue regeneration

Adipose-derived stem cells (ADSCs) have promising applications in tissue regeneration. Currently, there are only a few ADSC products that have been approved for clinical use. The clinical application of ADSCs still faces many challenges. Here, we review emerging strategies to improve the therapeutic efficacy of ADSCs in tissue regeneration. First, a great quantity of cells is often needed for the stem cell therapies, which requires the advanced cell expansion technologies. In addition cell-derived products are also required for the development of ‘cell-free’ therapies to overcome the drawbacks of cell-based therapies. Second, it is necessary to strengthen the regenerative functions of ADSCs, including viability, differentiation and paracrine ability, for the tissue repair and regeneration required for different physiological and pathophysiological conditions. Third, poor delivery efficiency also restricts the therapeutic effect of ADSCs. Effective methods to improve cell delivery include alleviating harsh microenvironments, enhancing targeting ability and prolonging cell retention. Moreover, we also point out some critical issues about the sources, effectiveness and safety of ADSCs. With these advanced strategies to improve the therapeutic efficacy of ADSCs, ADSC-based treatment holds great promise for clinical applications in tissue regeneration.

Insights of CRISPR-Cas systems in stem cells: progress in regenerative medicine

Regenerative medicine, a therapeutic approach using stem cells, aims to rejuvenate and restore the normalized function of the cells, tissues, and organs that are injured, malfunctioning, and afflicted. This influential technology reaches its zenith when it is integrated with the CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR associated) technology of genome editing. This tool acts as a programmable restriction enzyme system, which targets DNA as well as RNA and gets redeployed for the customization of DNA/RNA sequences. The dynamic behaviour of nuclear manipulation and transcriptional regulation by CRISPR-Cas technology renders it with numerous employment in the field of biologics and research. Here, the possible impact of the commonly practiced CRISPR-Cas systems in regenerative medicines is being reviewed. Primarily, the discussion of the working mechanism of this system and the fate of stem cells will be scrutinized. A detailed description of the CRISPR based regenerative therapeutic approaches for a horde of diseases like genetic disorders, neural diseases, and blood-related diseases is elucidated.

Efficient fabrication of stretching hydrogels with programmable strain gradients as cell sheet delivery vehicles

Fabricating functional cell sheets with excellent mechanical strength for tissue regeneration remains challenging. Therefore, we devised a novel 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide/N-hydroxy-succinimide crosslinked hydrogel carrier composed of gelatin (Ge) and beta-cyclodextrin (β-CD) that promoted the adhesion and proliferation of keratinocytes (Kcs) compared with those cultured on a Ge hydrogel due to significantly higher pore size, porosity, and stiffness, as confirmed using field emission scanning electron microscopy (FE-SEM) and shear wave elastography (SWE). Upon exposure to a programmable gradient microenvironment, cells displayed a stress/strain-dependent spatial-temporal distribution of extended cellular phenotypes and cytoskeletons. The promoted proliferation of Kcs and the increased retention of the undifferentiated cell phenotype on Ge-β-CD composite hydrogels under a 15% strain led to the accelerated detachment of cell sheets with retained cell-cell junctions. Moreover, the stretch-triggered upregulated expression of phosphorylated yes-associated protein (YAP) 1 suggested that this effect might be associated with the mechanical stimulation-induced activation of the YAP pathway.

Chemically Crosslinked Methylcellulose Substrates for Cell Sheet Engineering

Methylcellulose (MC) hydrogels have been successfully proposed in the field of cell sheet engineering (CSE), allowing cell detachment from their surface by lowering the temperature below their transition temperature (Tt). Among the main limitations of pristine MC hydrogels, low physical stability and mechanical performances limit the breadth of their potential applications. In this study, a crosslinking strategy based on citric acid (CA) was used to prepare thermoresponsive MC hydrogels, with different degrees of crosslinking, to exploit their possible use as substrates in CSE. The investigated amounts of CA did not cause any cytotoxic effect while improving the mechanical performance of the hydrogels (+11-fold increase in E, compared to control MC). The possibility to obtain cell sheets (CSs) was then demonstrated using murine fibroblast cell line (L929 cells). Cells adhered on crosslinked MC hydrogels' surface in standard culture conditions and then were harvested at selected time points as single CSs. CS detachment was achieved simply by lowering the external temperature below the Tt of MC. The detached CSs displayed adhesive and proliferative activity when transferred to new plastic culture surfaces, indicating a high potential for regenerative purposes.

Epigenetic reprogramming of cell identity: lessons from development for regenerative medicine

Epigenetic mechanisms are known to define cell-type identity and function. Hence, reprogramming of one cell type into another essentially requires a rewiring of the underlying epigenome. Cellular reprogramming can convert somatic cells to induced pluripotent stem cells (iPSCs) that can be directed to differentiate to specific cell types. Trans-differentiation or direct reprogramming, on the other hand, involves the direct conversion of one cell type into another. In this review, we highlight how gene regulatory mechanisms identified to be critical for developmental processes were successfully used for cellular reprogramming of various cell types. We also discuss how the therapeutic use of the reprogrammed cells is beginning to revolutionize the field of regenerative medicine particularly in the repair and regeneration of damaged tissue and organs arising from pathological conditions or accidents. Lastly, we highlight some key challenges hindering the application of cellular reprogramming for therapeutic purposes.

A Near-Infrared-Triggered Dynamic Wrinkling Biointerface for Noninvasive Harvesting of Practical Cell Sheets

Cell sheet engineering represents a new era of precise and efficient regenerative medicine, but its efficacy is limited by the elaborative preparation and the weak mechanics. Herein, a near-infrared (NIR)-triggered dynamic wrinkling biointerface was designed for rapid acquisition of practical cell sheets. The biocompatible NIR can initiate the photothermal-mechanical linkage cascade to efficiently dissolve the collagen supporting layer and release the high-quality cell sheets. The interfacial shear force generates with the dynamic wrinkling, playing an active role in accelerating the cell sheet release. High-quality and self-supporting cell sheets can be harvested within a few minutes, demonstrating a new paradigm of photothermal-mechanical manipulation. The transplantable cell sheets with outstanding physiological and mechanical performances were proven to promote wound healing in skin regeneration. This method may open a completely new front in thermal and mechanical responsive cascade to harvest cell sheets, facilitating their wide applications in regenerative medicine.

Mesenchymal Stem Cell Sheet Promotes Functional Recovery and Palliates Neuropathic Pain in a Subacute Spinal Cord Injury Model

Stem cell therapy has been shown to reverse the sequelae of spinal cord injury (SCI). Although the ideal treatment route remains unknown, providing a large number of stem cells to the injured site using less invasive techniques is critical to achieving maximal recovery. This study was conducted to determine whether administration of bone marrow stem cell (BMSC) sheet made on its own without a scaffold is superior to intramedullary cell transplantation in a rat subacute SCI model. Adult female Sprague-Dawley rats were subjected to SCI by 30 g clip compression at the level of Th6 and Th7 and were administered BMSC cell sheet (7 × 10⁴ cells, subdural), cell suspension (7 × 10⁴ cells, intramedullary), or control seven days after the injury. Motor and sensory assessments, as well as histological evaluation, were performed to determine the efficacy of the different cell transplantation procedures. While both the cell sheet and cell intramedullary injection groups showed significant motor recovery compared to the control group, the cell sheet group showed better results. Furthermore, the cell sheet group displayed a significant sensory recovery compared to the other groups. A histological evaluation revealed that the cell sheet group showed smaller injury lesion volume, less inflammation, and gliosis compared to other groups. Sensory-related fibers of μ-opioid receptors (MOR, interneuron) and hydroxytryptamine transporters (HTT, descending pain inhibitory pathway), located around the dorsal horn of the spinal cord at the caudal side of the SCI, were preserved only in the cell sheet group. Stem cells could also be found inside the peri-injured spinal cord in the cell sheet group. BMSC cell sheets were able to promote functional recovery and palliate neuropathic pain more effectively than intramedullary injections, thus serving as a good treatment option for SCI.

Rapid harvesting of stem cell sheets by thermoresponsive bulk poly(N-isopropylacrylamide) (PNIPAAm) nanotopography

To date, cell sheet engineering-based technologies have actualized diverse scaffold-free bio-products to revitalize unintentionally damaged tissues/organs, including cardiomyopathy, corneal defects, and periodontal damage. Although substantial interest is now centered on the practical utilization of these bio-products for patients, the long harvest period of stem cells- or other primary cell-sheets has become a huge hurdle. Here, we dramatically reduce the total harvest period of a cell sheet (from cell layer formation to cell sheet detachment) composed of human bone marrow mesenchymal stem cells (hBMSCs) down to 2 d with the help of bulk thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) substrate nanotopography, which is not achievable via the previous grafting methods using PNIPAAm. We directly replicated an isotropic 400 nm-nanopore-array pattern on a bulk PNIPAAm substrate through UV polymerization of highly concentrated NIPAAm monomers, which was achieved using a remarkably increased Young's modulus of bulk PNIPAAm that was 1500 times higher than conventional PNIPAAm. The rapid harvesting of the hBMSC sheet on the bulk PNIPAAm substrate nanotopography was not only based on the accelerated formation and maturation of the hBMSC layer, but also the easy detachment of the hBMSC sheet induced by the abrupt change in the surface roughness of the substrate below the lower critical solution temperature (LCST) owing to the enlarged surface area of the substrate. Our findings may contribute to reverse presumptions about the limitations regarding the grafting methods for the cell sheet harvest and could broaden the practical utilization of cell sheets for patients in the near future.

Considerations for the Bioengineering of Advanced Cardiac In Vitro Models of Myocardial Infarction

Despite the latest advances in cardiovascular biology and medicine, myocardial infarction (MI) remains one of the major causes of deaths worldwide. While reperfusion of the myocardium is critical to limit the ischemic damage typical of a MI event, it causes detrimental morphological and functional changes known as "reperfusion injury." This complex scenario is poorly represented in currently available models of ischemia/reperfusion injury, leading to a poor translation of findings from the bench to the bedside. However, more recent bioengineered in vitro models of the human heart represent more clinically relevant tools to prevent and treat MI in patients. These include 3D cultures of cardiac cells, the use of patient-derived stem cells, and 3D bioprinting technology. This review aims at highlighting the major features typical of a heart attack while comparing current in vitro, ex vivo, and in vivo models. This information has the potential to further guide in developing novel advanced in vitro cardiac models of ischemia/reperfusion injury. It may pave the way for the generation of advanced pathophysiological cardiac models with the potential to develop personalized therapies.

Adipose-derived stem cell sheets combined with β-tricalcium phosphate/collagen-I fiber scaffold improve cell osteogenesis

Transplantation of cell-based material is a promising approach for the treatment of critical bone defects. However, it is still limited by the lack of suitable scaffold material or abundant seeding cell sources. The present study aimed to establish a novel composite of an adipose-derived stem cell (ADSC) sheet and a synthetic porous β-tricalcium phosphate/collagen-I fiber (β-TCP/COL-I) scaffold to enhance osteogenic activity. ADSCs were isolated from 3-week-old female Sprague Dawley rats and the ADSC sheets were prepared in an osteoinductive medium. The study groups included the ADSC sheets/scaffold, scattered ADSCs/scaffold, ADSC sheet alone and scaffold alone. Scanning electron microscopy and energy-dispersive spectrometry were used to observe cell-scaffold interactions and analyze the relative calcium content on the composites' surface. Alizarin red S staining was used to examine the calcium deposition. ELISA and reverse transcription-quantitative PCR were used to detect the expression levels of alkaline phosphatase (ALP), osteocalcin (OCN) and osteopontin (OPN). The results revealed that ADSCs were able to tightly adhere to the β-TCP/COL-I scaffold with no cytotoxicity. The calcifying nodules reaction was positive on ADSC sheets and gradually increased after osteogenic induction. In addition, the β-TCP/COL-I scaffold combined with ADSC sheets was able to significantly enhance the expression levels of ALP, OCN and OPN and increase the superficial relative calcium content compared to scattered ADSCs/scaffold or the ADSC sheet alone (P<0.05). The results indicated that ADSCs possess a strong osteogenic potential, particularly in the cell-sheet form and when compounded with the β-TCP/COL-I scaffold, compared to scattered ADSCs with a β-TCP/COL-I scaffold or an ADSC sheet alone. This novel composite may be a promising candidate for bone engineering.

Activation of Nell-1 in BMSC Sheet Promotes Implant Osseointegration Through Regulating Runx2/Osterix Axis

Neural epidermal growth factor-like 1 protein (Nell-1) is first studied because of its association with human craniosynostosis. Nell-1 has been used to accelerate the process of fracture healing because of the osteoinductive ability in recent years. However, the role of Nell-1 during the process of osteointegration is unknown. Here we show that activation of Nell-1 in the BMSC sheet promotes osseointegration in vivo and in vitro. We found that overexpression of Nell-1 improved osteogenic differentiation and enhanced matrix mineralization of BMSCs through increasing expression of Runx2 and Osterix. Activation of Nell-1 up-regulated the expression ratio of OPG/RANKL, which might have a negative influence on osteoclast differentiation. Furthermore, we obtained BMSC sheet-implant complexes transfected with lentivirus overexpressing and interfering Nell-1 in in vivo study, and confirmed that overexpression of Nell-1 promoted new bone formation around the implant and increased the bone-implant contacting area percentage. Our results demonstrate that activation of Nell-1 improves implant osteointegration by regulating Runx2/Osterix axis and shows the potential of BMSC sheet-implant complexes in gene therapy.

Advancing application of mesenchymal stem cell-based bone tissue regeneration

Reconstruction of bone defects, especially the critical-sized defects, with mechanical integrity to the skeleton is important for a patient's rehabilitation, however, it still remains challenge. Utilizing biomaterials of human origin bone tissue for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural bone tissue with regard to its properties. However, not only efficacious and safe but also cost-effective and convenient are important for regenerative biomaterials to achieve clinical translation and commercial success. Advances in our understanding of regenerative biomaterials and their roles in new bone formation potentially opened a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multicomponent construction of native extracellular matrix (ECM) for cell accommodation, the ECM-mimicking biomaterials and the naturally decellularized ECM scaffolds were used to create new tissues for bone restoration. On the other hand, with the going deep in understanding of mesenchymal stem cells (MSCs), they have shown great promise to jumpstart and facilitate bone healing even in diseased microenvironments with pharmacology-based endogenous MSCs rescue/mobilization, systemic/local infusion of MSCs for cytotherapy, biomaterials-based approaches, cell-sheets/-aggregates technology and usage of subcellular vesicles of MSCs to achieve scaffolds-free or cell-free delivery system, all of them have been shown can improve MSCs-mediated regeneration in preclinical studies and several clinical trials. Here, following an overview discussed autogenous/allogenic and ECM-based bone biomaterials for reconstructive surgery and applications of MSCs-mediated bone healing and tissue engineering to further offer principles and effective strategies to optimize MSCs-based bone regeneration.

•

Focusing on MSCs based bone regeneration.

•

Discussed cytotherapy, cell-free therapies and cell-aggregates technology in detail.

•

Stating the approaches of MSCs in diseased microenvironments.

Readily Adsorbable Thermoresponsive Polymers for the Preparation of Smart Cell-Culturing Surfaces on Site

The efficacy of several cell therapy products is directly impacted by trypsinization, which can diminish the engrafting capacity of transplanted cells by cleaving cell surface receptors. Thermoresponsive surfaces can alleviate this drawback, enabling temperature-driven and enzyme-free cell harvesting. However, the production of thermoresponsive surfaces relies on dedicated and complex equipment, often involving protocols dependent on high surface activation energies that prevent the development of scalable and universal platforms. In this work, we developed thermoresponsive copolymers incorporating styrene units that enable the copolymer adsorption on tissue culture polystyrene surfaces from an alcoholic solution in a short time, regardless of the vessel size and geometry, and without any particular equipment. In this way, the procedure can be performed with minimal effort by the end user on any surface. The thermoresponsive copolymers were synthesized via reversible addition-fragmentation chain transfer polymerization, providing high control over the polymer microstructure, a key parameter for tuning its cloud point and architecture. Block copolymers comprising a thermoresponsive segment and a polystyrene block exhibited optimal adhesion on conventional cell culture surfaces and permitted a more efficient temperature-mediated harvesting of adipose-derived stromal cells and Chinese hamster ovary cells compared to their statistical counterparts. To expand the application of this polymer deposition protocol to serum-free cell culture, we also considered the polymer modification with the tripeptide arginine-glycine-aspartic acid, known to promote the cell adhesion to synthetic substrates. The incorporation of this peptide enabled the collection in serum-free conditions of intact cell sheets from surfaces prepared shortly before their usage.

Esophageal regenerative therapy using cell sheet technology

We have been conducting research on esophageal regenerative therapy using cell sheet technology. In particular, in the endoscopic field, we have pushed forward clinical research on endoscopic transplantation of cultured autologous oral mucosal epithelial cell sheets to esophageal ulcer after endoscopic submucosal dissection (ESD). We started research in this direction using animal models in 2004 and performed clinical research in 2012 in collaboration with Nagasaki University and Karolinska Institute. Although in full-circumferential cases it was difficult to prevent esophageal stricture after ESD, there were no complications and stricture could be suppressed. The cell sheet technology is still in its infancy. However, we are convinced that it has a high potential for application in various areas of gastrointestinal science. In this review, we focus on the pre-clinical and clinical trial results obtained and on the theoretical aspects of (1) stricture prevention, (2) esophageal tissue engineering research, and (3) endoscopic transplantation, and review the esophageal regenerative therapy by cell sheet technology.

Tissue Engineering; Current Status & Futuristic Scope

Almost 30 years have passed since the term ‘tissue engineering’ was created to represent a new concept that focuses on the regeneration of neotissues from cells with the support of biomaterials and growth factors. This interdisciplinary engineering has attracted much attention as a new therapeutic means that may overcome the drawbacks involved in the current artificial organs and organ transplantation that have also been aiming at replacing lost or severely damaged tissues or organs. However, the tissues regenerated by tissue engineering and widely applied to patients are still minimal, including skin, bone, cartilage, capillary, and periodontal tissues. What are the reasons for such slow advances in clinical applications of tissue engineering? This article gives a brief overview of the current state of tissue engineering, covering the fundamentals and applications. The fundamentals of tissue engineering involve cell sources, scaffolds for cell expansion and differentiation, as well as carriers for growth factors. Animal and human trials are a major part of the applications. Based on these results, some critical problems to be resolved for the advances of tissue engineering are addressed from the engineering point of view, emphasizing the close collaboration between medical doctors and biomaterials scientists.

Thermo-responsive polymers: Applications of smart materials in drug delivery and tissue engineering

Synthetic polymers are attracting great attention in the last decades for their use in the biomedical field as nanovectors for controlled drug delivery, hydrogels and scaffolds enabling cell growth. Among them, polymers able to respond to environmental stimuli have been recently under growing consideration to impart a "smart" behavior to the final product, which is highly desirable to provide it with a specific dynamic and an advanced function. In particular, thermo-responsive polymers, materials able to undergo a discontinuous phase transition or morphological change in response to a temperature variation, are among the most studied. The development of the so-called controlled radical polymerization techniques has paved the way to a high degree of engineering for the polymer architecture and properties, which in turn brought to a plethora of sophisticated behaviors for these polymers by simply switching the external temperature. These can be exploited in many different fields, from separation to advanced optics and biosensors. The aim of this review is to critically discuss the latest advances in the development of thermo-responsive materials for biomedical applications, including a highly controlled drug delivery, mediation of cell growth and bioseparation. The focus is on the structural and design aspects that are required to exploit such materials for cutting-edge applications in the biomedical field.

Effective stacking and transplantation of stem cell sheets using exogenous ROS-producing film for accelerated wound healing

Extensive skin loss caused by burns or diabetic ulcers may lead to major disability or even death. Therefore, cell-based therapies that enhance skin regeneration are clinically needed. Previous approaches have been applied the injections of cell suspensions and the implantation of biodegradable three-dimensional scaffolds seeded cells. However, these treatments have limits due to poor localization of the injected cells and insufficient delivery of oxygen and nutrients to cells. Recently, cell sheet-based tissue engineering has been developed to transplant cell sheets, which are cell-dense tissues without scaffolds. Because cell density is one of the important factors for improving the therapeutic effect of cell transplantation, transplanting layered cell sheet constructs can promote the recovery of tissue function and tissue regeneration compared with a single cell sheet. Thus, this study designed ROS-induced cell sheet stacking method with newly fabricated hematoporphyrin-incorporated polyketone film (Hp-PK film) to enhance cell sheet delivery efficiency and application in wound healing. We have demonstrated the therapeutic effect of a multi-layered mesenchymal stem cell sheets onto a full-thickness wound defect in nude mice. Consequentially, three-layered cell sheets transplanted and stacked by ROS-induced method promoted angiogenesis and skin regeneration at the wound site. Thus, our strategy based on Hp-PK film, which allows for easy stacking and transplantation of cell sheets, could be applied to enhance tissue regeneration. STATEMENT OF SIGNIFICANCE: We herein report exogenous ROS-induced cell sheet stacking method with newly fabricated hematoporphyrin-incorporated polyketone film (Hp-PK film) to enhance cell sheet transplantation efficiency and application in wound healing. Although there are several ways to stack-up cell sheets, all of these methods have limitations in transplanting the cell sheet directly to the target site. The method is simple and takes a relatively short time compared to previously reported methods for stacking and transplanting cell sheets. Thus, our study will provide a scientific impact because the method of applying exogenous ROS generated from Hp-PK film on cell detachment can transplant the cell sheet through a process of putting a cell sheet-cultured film on the lesion, irradiating with light, and then removing only the film.

Stem cell-based bone and dental regeneration: a view of microenvironmental modulation

In modern medicine, bone and dental loss and defects are common and widespread morbidities, for which regenerative therapy has shown great promise. Mesenchymal stem cells, obtained from various sources and playing an essential role in organ development and postnatal repair, have exhibited enormous potential for regenerating bone and dental tissue. Currently, mesenchymal stem cells (MSCs)-based bone and dental regeneration mainly includes two strategies: the rescue or mobilization of endogenous MSCs and the application of exogenous MSCs in cytotherapy or tissue engineering. Nevertheless, the efficacy of MSC-based regeneration is not always fulfilled, especially in diseased microenvironments. Specifically, the diseased microenvironment not only impairs the regenerative potential of resident MSCs but also controls the therapeutic efficacy of exogenous MSCs, both as donors and recipients. Accordingly, approaches targeting a diseased microenvironment have been established, including improving the diseased niche to restore endogenous MSCs, enhancing MSC resistance to a diseased microenvironment and renormalizing the microenvironment to guarantee MSC-mediated therapies. Moreover, the application of extracellular vesicles (EVs) as cell-free therapy has emerged as a promising therapeutic strategy. In this review, we summarize current knowledge regarding the tactics of MSC-based bone and dental regeneration and the decisive role of the microenvironment, emphasizing the therapeutic potential of microenvironment-targeting strategies in bone and dental regenerative medicine.

Photocleavable Peptide-Poly(2-hydroxyethyl methacrylate) Hybrid Graft Copolymer via Postpolymerization Modification by Click Chemistry To Modulate the Cell Affinities of 2D and 3D Materials

Controlling the surface properties of engineered materials to enhance or reduce their cellular affinities remains a significant challenge in the field of biomaterials. We describe a universal technique for modulating the cytocompatibilities of two-dimensional (2D) and three-dimensional (3D) materials using a novel photocleavable peptide-grafted poly(2-hydroxyethyl methacrylate) (PHEMA) hybrid. The reversible addition-fragmentation chain transfer copolymerization of HEMA and propargyl acrylate was successfully controlled. The resultant alkyne-containing PHEMA was then used to modify the azide-terminated oligopeptides [Arg-Gly-Asp-Ser (RGDS)] with a photolabile 3-amino-3-(2-nitrophenyl)propanoic acid moiety via the copper-catalyzed alkyne-azide click chemistry. This strategy was readily used to decorate the surfaces of both hydrophilic and hydrophobic materials with RGDS peptides due to the high film-forming abilities of the PHEMA unit. The resultant thin film acted as an effective scaffold for improving cell adhesion and growth of NIH/3T3 fibroblasts and MC3T3-E1 osteoblast-like cells in vitro. In addition, UV irradiation of the surface led to the detachment of cells from the material surface accompanied by the photocleavage of RGDS grafts and enabled the 2D-patterning of cells and cell sheet engineering. The applicability of this system to 3D materials was investigated, and the cell adhesion was remarkably enhanced on a 3D-printed poly(lactic acid) object. This facile, biocompatible, and photoprocessable peptide-vinyl polymer hybrid system is valuable for its ability to advance the fields of tissue engineering, cell chips, and regenerative medicine.

Development of thermo-responsive polycaprolactone macrocarriers conjugated with Poly(N-isopropyl acrylamide) for cell culture

Poly(N-isopropyl acrylamide) (PNIPAAm) is a well-known 'smart' material responding to external stimuli such as temperature. PNIPAAm was successfully conjugated to polycaprolactone (PCL) bead surfaces through amidation reaction. Functionalization steps were characterized and confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and Energy Dispersion Spectroscopy. PNIPAAm-conjugated PCL allowed human dermal fibroblast cells (HDF) and mesenchymal stem cells (MSC) to adhere, spread, and grow successfully. By reducing the temperature to 30 °C, more than 70% of HDF were detached from PNIPAAm-conjugated PCL macrocarriers with 85% viability. The cell detachment ratio by trypsin treatment was slightly higher than that induced by reduced temperature, however, cell detachment from PNIPAAm-conjugated macrocarriers by lowering the temperature significantly reduced cell death and increased both cell viability and the recovery potential of the detached cells. HDF attachment and detachment were also observed by Live-Dead staining and phase contrast imaging. The expression of extracellular matrix proteins such as Laminin and Fibronectin was also affected by the trypsinization process but not by the reduced temperature process. Taken together, our results showed that thermo-responsive macrocarriers could be a promising alternative method for the non-invasive detachment of cells, in particular for tissue engineering, clinical applications and the use of bioreactors.

Directed Differentiation of Human Corneal Endothelial Cells From Human Embryonic Stem Cells by Using Cell-Conditioned Culture Media

Purpose

A shortage of human corneal endothelial cells (HCEC) for transplant and current methods of differentiation induction require chemical compounds, which might cast further influences after differentiation induction. Therefore, we developed a simple and straightforward approach to endothelial cell differentiation from human embryonic stem cells (hESC).

Methods

HESC are used to differentiate into HCEC by employing a two-stage method, which involves the application of two different types of conditioned culture medium, human corneal stromal cell-conditioned medium (HCSC-CM) and lens epithelial cell (LEC) plus HCSC-CM (LEC-CM+HCEC-CM). In brief, hESCs were treated with different conditioned media to induce directed endothelial differentiation.

Results

In the presence of conditioned culture medium, embryonic stem cells differentiate first under the control of periocular mesenchymal precursors (POMPs). Consequently, the expression of several POMP markers was observed. Following this first stage differentiation, POMPs were further directed to differentiate into corneal endothelial cell (CEC)-like cells in the presence of the second-conditioned culture medium. The differentiation of POMPs into CEC-like cells is regulated by a TGFβ-2/FOXC1 signaling pathway that is activated by the factors present in the conditioned culture medium.

Conclusions

HCEC-like cells could be differentiated from hESC by simply using a two-step, preconditioned, medium-mediated approach, which could significantly minimize the workload to generate HCEC for potential clinical use. This research may provide an ideal cell source for corneal regenerative medicine and clinical treatment for corneal diseases in the future.

ESC Working Group on Cellular Biology of the Heart: position paper for Cardiovascular Research: tissue engineering strategies combined with cell therapies for cardiac repair in ischaemic heart disease and heart failure

Morbidity and mortality from ischaemic heart disease (IHD) and heart failure (HF) remain significant in Europe and are increasing worldwide. Patients with IHD or HF might benefit from novel therapeutic strategies, such as cell-based therapies. We recently discussed the therapeutic potential of cell-based therapies and provided recommendations on how to improve the therapeutic translation of these novel strategies for effective cardiac regeneration and repair. Despite major advances in optimizing these strategies with respect to cell source and delivery method, the clinical outcome of cell-based therapy remains unsatisfactory. Major obstacles are the low engraftment and survival rate of transplanted cells in the harmful microenvironment of the host tissue, and the paucity or even lack of endogenous cells with repair capacity. Therefore, new ways of delivering cells and their derivatives are required in order to empower cell-based cardiac repair and regeneration in patients with IHD or HF. Strategies using tissue engineering (TE) combine cells with matrix materials to enhance cell retention or cell delivery in the transplanted area, and have recently received much attention for this purpose. Here, we summarize knowledge on novel approaches emerging from the TE scenario. In particular, we will discuss how combinations of cell/bio-materials (e.g. hydrogels, cell sheets, prefabricated matrices, microspheres, and injectable matrices) combinations might enhance cell retention or cell delivery in the transplantation areas, thereby increase the success rate of cell therapies for IHD and HF. We will not focus on the use of classical engineering approaches, employing fully synthetic materials, because of their unsatisfactory material properties which render them not clinically applicable. The overall aim of this Position Paper from the ESC Working Group Cellular Biology of the Heart is to provide recommendations on how to proceed in research with these novel TE strategies combined with cell-based therapies to boost cardiac repair in the clinical settings of IHD and HF.

Off-the-Shelf Cell Sheets as a Pleural Substitute for Closing Visceral Pleural Injuries

During pulmonary resections, removal of visceral pleura is frequently required, resulting in lung air leakage (LAL) and bleeding. Especially persistent LAL after pulmonary surgery has negative consequences. Current surgical procedures are ineffective in closing these visceral pleural injuries. Previously, the authors' laboratory has developed a novel and effective LAL sealant using tissue-engineered cell sheets harvested from temperature-responsive culture dishes. The clinical application of fresh fibroblast sheets (FSs) is limited by several problems related to the cell culture period, mass production, preservation, and transportation. Therefore, cryopreservation of FSs and feasibility of off-the-shelf FSs for repairing visceral pleural defects were investigated. Over 3 to 6 months, harvested skin-derived FSs in Dulbecco's modified Eagle's medium supplemented with 10% dimethyl sulfoxide were stored in an atmosphere of liquid nitrogen. The amounts of cytokines (basic fibroblast growth factor [bFGF] and vascular endothelial growth factor) released from frozen-thawed FSs were determined. bFGF levels were significantly elevated in frozen-thawed FSs compared with fresh FSs. After a visceral pleural injury model was created, a frozen-thawed skin-derived FS was transplanted directly to the defect. One month after transplantation, the frozen-thawed FS remained on the pleural surface, resulting in permanent closure, suggesting that cells in the off-the-shelf FS had the ability to proliferate and release various cytokines. Frozen-thawed FSs were useful for closing LALs during pulmonary surgery as an off-the-shelf technique and would be used as a pleural substitute.

Poly-l/dl-lactic acid films functionalized with collagen IV as carrier substrata for corneal epithelial stem cells

Limbal epithelial stem cells (LESCs) are responsible for the renewal of corneal epithelium. Cultivated limbal epithelial transplantation is the current treatment of choice for restoring the loss or dysfunction of LESCs. To perform this procedure, a substratum is necessary for in vitro culturing of limbal epithelial cells and their subsequent transplantation onto the ocular surface. In this work, we evaluated poly-L/DL-lactic acid 70:30 (PLA) films functionalized with type IV collagen (col IV) as potential in vitro carrier substrata for LESCs. We first demonstrated that PLA-col IV films were biocompatible and suitable for the proliferation of human corneal epithelial cells. Subsequently, limbal epithelial cell suspensions, isolated from human limbal rings, were cultivated using culture medium that did not contain animal components. The cells adhered significantly faster to PLA-col IV films than to tissue culture plastic (TCP). The mRNA expression levels for the LESC specific markers, K15, P63α and ABCG2 were similar or greater (significantly in the case of K15) in limbal epithelial cells cultured on PLA-col IV films than limbal epithelial cells cultured on TCP. The percentage of cells expressing the corneal (K3, K12) and the LESC (P63α, ABCG2) specific markers was similar for both substrata. These results suggest that the PLA-col IV films promoted LESC attachment and helped to maintain their undifferentiated stem cell phenotype. Consequently, these substrata offer an alternative for the transplantation of limbal cells onto the ocular surface.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

Use of a pre-vascularised oral mucosal cell sheet for promoting cutaneous burn wound healing

Pre-vascularised cell sheets have been used to promote early angiogenesis and graft survival. However, the use of pre-vascularised mucosal cell sheets for burn wounds has been rarely evaluated. Therefore, we examined the applicability of an oral pre-vascularised mucosal cell sheet that we had previously developed for the treatment of cutaneous burn wounds.

Methods: Mucosal keratinocytes, fibroblasts, and endothelial progenitor cells were isolated from the oral mucosa and peripheral blood and were expanded in vitro. Mucosal cell sheets were generated by seeding cultured keratinocytes onto a mixture of fibroblasts, endothelial cells, and fibrin. Third-degree burn wounds were created on the backs of rats and were covered with the cell sheets, skin grafts, or silastic sheets as a control. Gross and microscopic findings and gene expression profiles of wounds were compared among the groups.

Results: CD31-positive microvessels were observed in the fibrin-matrix layer of the cell sheet. In the cutaneous burn wound model, the cell sheets promoted wound healing, with accelerated wound closure and less scarring than with silastic sheets and skin grafts. The cell sheets had more microvessels and proliferating cells and less neutrophil infiltration and fibrotic features than the controls or skin grafts. The cell sheet induced higher mRNA expression of KRT14, VEGFA, IL10, and AQP3 and lower mRNA expression of TGFB1, IL6, ICAM1, ACTA2, and FN1 than did the controls or skin grafts.

Conclusions: The pre-vascularised mucosal cell sheet promotes cutaneous burn wound healing.

Cell sheet biofabrication by co-administration of mesenchymal stem cells secretome and vitamin C on thermoresponsive polymer

Cell sheet technology aims at replacement of artificial extracellular matrix (ECM) or scaffolds, popular in tissue engineering, with natural cell derived ECM. Adipose tissue mesenchymal stem cells (ASCs) have the ability of ECM secretion and presented promising outcomes in clinical trials. As well, different studies found that secretome of ASCs could be suitable for triggering cell free regeneration induction. The aim of this study was to investigate the effect of using two bio-factors: secretome of ASCs (SE) and vitamin C (VC) for cell sheet engineering on a thermosensitive poly N-isopropyl acryl amide-Methacrylic acid (P(NIPAAm-MAA)) hydrogel. The results revealed that using thermosensitive P(NIPAAm-MAA) copolymer as matrix for cell sheet engineering lead to a rapid ON⁄OFF adhesion/deadhesion system by reducing temperature without enzymatic treatment (complete cell sheet release takes just 6 min). In addition, our study showed the potential of SE for inducing ASCs sheet formation. H&E staining exhibited the properties of a well-formed tissue layer with a dense ECM in sheets prepared by both SE and VC factors, as compared to those of VC or SE alone. Functional synergism of SE and VC exhibited statistically significant enhanced functionality regarding up-regulation of stemness genes expression, reduced β-galactosidase associated senescence, and facilitated sheet release. Additionally, alkaline phosphatase activity (ALP), mineralized deposits and osteoblast matrix around cells confirmed a better performance of ostogenic differentiation of ASCs induced by VC and SE. It was concluded that SE of ASCs and VC could be outstanding biofactors applicable for cell sheet technology.

Engineered tendon-fibrocartilage-bone composite and bone marrow-derived mesenchymal stem cell sheet augmentation promotes rotator cuff healing in a non-weight-bearing canine model

Reducing rotator cuff failure after repair remains a challenge due to suboptimal tendon-to-bone healing. In this study we report a novel biomaterial with engineered tendon-fibrocartilage-bone composite (TFBC) and bone marrow-derived mesenchymal stem cell sheet (BMSCS); this construct was tested for augmentation of rotator cuff repair using a canine non-weight-bearing (NWB) model. A total of 42 mixed-breed dogs were randomly allocated to 3 groups (n = 14 each). Unilateral infraspinatus tendon underwent suture repair only (control); augmentation with engineered TFBC alone (TFBC), or augmentation with engineered TFBC and BMSCS (TFBC + BMSCS). Histomorphometric analysis and biomechanical testing were performed at 6 weeks after surgery. The TFBC + BMSCS augmented repairs demonstrated superior histological scores, greater new fibrocartilage formation and collagen fiber organization at the tendon-bone interface compared with the controls. The ultimate failure load and ultimate stress were 286.80 ± 45.02 N and 4.50 ± 1.11 MPa for TFBC + BMSCS group, 163.20 ± 61.21 N and 2.60 ± 0.97 MPa for control group (TFBC + BMSCS vs control, P = 1.12E-04 and 0.003, respectively), 206.10 ± 60.99 N and 3.20 ± 1.31 MPa for TFBC group (TFBC + BMSCS vs TFBC, P = 0.009 and 0.045, respectively). In conclusion, application of an engineered TFBC and BMSCS can enhance rotator cuff healing in terms of anatomic structure, collagen organization and biomechanical strength in a canine NWB model. Combined TFBC and BMSCS augmentation is a promising strategy for rotator cuff tears and has a high potential impact on clinical practice.

Foreign Body Reaction to a Subcutaneously Implanted Self-Cleaning, Thermoresponsive Hydrogel Membrane for Glucose Biosensors

Towards achieveing a subcutaneously implanted glucose biosensor with long-term functionality, a thermoresponsive membrane previously shown to have potential to house a glucose sensing assay was evaluated herein for its ability to minimize the foriegn body reaction (FBR) and the resulting fibrous capsule. The severity of the FBR proportionally reduces diffusion of glucose to the sensor and hence sensor lifetime. However, efforts to reduce the FBR have largedly focused on anti-fouling materials that passively inhibit cellular attachment, particularly poly(ethylene glycol) (PEG). Herein, the extent of the FBR of a subcutaneously implanted "self-cleaning" cylindrical membrane was analyzed in rodents. This membrane represents an "actively anti-fouling" approach to reduce cellular adhesion. It is a thermoresponsive double network nanocomposite hydrogel (DNNC) comprised of poly(N-isopropylacrylamide) (PNIPAAm) and embedded polysiloxane nanoparticles. The membrane's cyclical deswelling/reswelling response to local body temperature fluctuations was anticipated to limit cellular accumulation. Indeed, after 30 days, the self-cleaning membrane exhibited a notably thin fibrous capsule (~30 µm) and increased microvascular density within 1 mm of the implant surface in comparison to a non-thermoresponsive, benchmark biocompatible control (PEG diacrylate, PEG-DA).

Exploring the anomalous cytotoxicity of commercially-available poly(N-isopropyl acrylamide) substrates

Poly(N-isopropyl acrylamide) (pNIPAM) is a stimulus-responsive polymer that has been of great interest to the bioengineering community. When the temperature is lowered below its lower critical solution temperature (∼32 °C), pNIPAM rapidly hydrates, and adherent cells detach as intact cell sheets. This cell-releasing behavior in a physiologically relevant temperature range has led to NIPAM's use for engineered tissues and other devices. In a previous study, however, the authors found that although most techniques used to polymerize NIPAM yield biocompatible films, some formulations from commercially-available NIPAM (cpNIPAM) can be cytotoxic. In this work, the authors investigate the reasons underlying this anomaly. The authors evaluated the response of a variety of cell types (e.g., bovine aortic endothelial cells, BAECs; monkey kidney epithelial cells, Vero cells; and mouse embryonic fibroblasts, 3T3s) after culture on substrates spin-coated with sol-gel (spNIPAM) and commercially-prepared (cpNIPAM). The relative biocompatibility of each cell type was evaluated using observations of its cell morphology and function (e.g., XTT and Live/Dead assays) after 48 and 96 h in culture. In addition, the substrates themselves were analyzed using NMR, goniometry, and XPS. The authors find that all the cell types were compromised by 96 h in culture with cpNIPAM, although the manner in which the cells are compromised differs; in particular, while Vero and 3T3 cells appear to be undergoing cytotoxic death, BAECs undergo apoptic death. The authors believe that this result is due to a combination of factors, including the presence of short chain oligomers of NIPAM in the commercially-available preparation. This work will provide valuable insights into the cytotoxicity of commercially-prepared polymer substrates for this type of bioengineering work and therefore into the applicability of cells grown on such surfaces for human subjects.

Amphiphilic peptides as novel nanomaterials: design, self-assembly and application

Designer self-assembling peptides are a category of emerging nanobiomaterials which have been widely investigated in the past decades. In this field, amphiphilic peptides have received special attention for their simplicity in design and versatility in application. This review focuses on recent progress in designer amphiphilic peptides, trying to give a comprehensive overview about this special type of self-assembling peptides. By exploring published studies on several typical types of amphiphilic peptides in recent years, herein we discuss in detail the basic design, self-assembling behaviors and the mechanism of amphiphilic peptides, as well as how their nanostructures are affected by the peptide characteristics or environmental parameters. The applications of these peptides as potential nanomaterials for nanomedicine and nanotechnology are also summarized.

Plants and Their Bioactive Constituents in Mesenchymal Stem Cell-Based Periodontal Regeneration: A Novel Prospective

Periodontitis is a common chronic inflammatory disease, which causes the destruction of both the soft and mineralized tissues. However, current treatments such as bone graft materials, barrier membranes, and protein products all have difficulties in regenerating the complete periodontal tissue structure. Stem cell-based tissue engineering has now emerged as one of the most effective treatments for the patients suffering from periodontal diseases. Plants not only can be substrates for life processes, but also contain hormones or functional molecules. Numbers of preclinical studies have revealed that products from plant can be successfully applied in modulating proliferation and differentiation of human mesenchymal stem cells. Plant-derived substances can induce stem cells osteogenic differentiation, and they also possess angiogenic potency. Furthermore, in the field of tissue engineering, plant-derived compounds or plant extracts can be incorporated with biomaterials or utilized as biomaterials for cell transplantation. So it is speculated that botanical products may become a new perspective in stem cell-based periodontal regeneration. However, the lack of achieving predict clinical efficacy and quality control has been the major impediment to its extensive application. This review gives an overview of the prospect of applying different plant-derived substances in various human mesenchymal stem cells-based periodontal regeneration.

Endothelial progenitor cells improve the therapeutic effect of mesenchymal stem cell sheets on irradiated bone defect repair in a rat model

Background

The reconstruction of bone defects is often impaired by radiotherapy since bone quality is compromised by radiation. This study aims to investigate the therapeutic efficacy of the composite cell sheets-bone marrow mesenchymal stem cell (BMSC) sheets cocultured with endothelial progenitor cells (EPCs)-in the healing of irradiated bone defects and the biological effects of EPCs on the osteogenic properties of BMSC sheets.

Methods

BMSCs and EPCs were isolated from rat bone marrow. BMSCs were used to form cell sheets by the vitamin C inducing method. EPCs were seeded on BMSC sheets to make EPCs–BMSC sheets. Osteogenesis of EPCs–BMSC sheets and BMSC sheets were tested. In vitro osteogenesis tests included ALP, Alizarin Red S, Sirius Red staining, qRT-PCR and Western blot analysis after 3 and 7 days of osteogenic incubation. Subcutaneous osteogenesis was tested by H&E staining and immunohistochemical staining 8 weeks after transplantation. EPCs–BMSC sheets and BMSC sheets were used in the 3 mm defects of non-irradiated and irradiated rat tibias. Micro-CT and histological analysis were used to test the healing of bone defects 4 and 8 weeks after transplantation.

Results

EPCs–BMSC sheets showed enhanced osteogenic differentiation in vitro with increased expression of osteoblastic markers and osteogenesis related staining compared with BMSC sheets. In subcutaneous osteogenesis test, EPCs–BMSC sheets formed larger areas of new bone and blood vessels. The EPCs–BMSC group had the highest volume of newly formed bone in the defect area of irradiated tibias.

Conclusions

EPCs improved the osteogenic differentiation of BMSC Sheets and enhanced the ectopic bone formation. EPCs–BMSC sheets promoted bone healing in irradiated rat tibias. EPCs–BMSC sheets are potentially useful in the reconstruction of bone defect after radiotherapy.

Electronic supplementary material

The online version of this article (10.1186/s12967-018-1517-4) contains supplementary material, which is available to authorized users.

Biofabrication strategies for 3D in vitro models and regenerative medicine

Organs are complex systems composed of different cells, proteins and signalling molecules that are arranged in a highly ordered structure to orchestrate a myriad of functions in our body. Biofabrication strategies can be applied to engineer 3D tissue models in vitro by mimicking the structure and function of native tissue through the precise deposition and assembly of materials and cells. This approach allows the spatiotemporal control over cell-cell and cell-extracellular matrix communication and thus the recreation of tissue-like structures. In this Review, we examine biofabrication strategies for the construction of functional tissue replacements and organ models, focusing on the development of biomaterials, such as supramolecular and photosensitive materials, that can be processed using biofabrication techniques. We highlight bioprinted and bioassembled tissue models and survey biofabrication techniques for their potential to recreate complex tissue properties, such as shape, vasculature and specific functionalities. Finally, we discuss challenges, such as scalability and the foreign body response, and opportunities in the field and provide an outlook to the future of biofabrication in regenerative medicine.

Curcumin-mediated bone marrow mesenchymal stem cell sheets create a favorable immune microenvironment for adult full-thickness cutaneous wound healing

Background

Adult full-thickness cutaneous wound repair suffers from an imbalanced immune response, leading to nonfunctional reconstructed tissue and fibrosis. Although various treatments have been reported, the immune-mediated tissue regeneration driven by biomaterial offers an attractive regenerative strategy for damaged tissue repair.

Methods

In this research, we investigated a specific bone marrow-derived mesenchymal stem cell (BMSC) sheet that was induced by the Traditional Chinese Medicine curcumin (CS-C) and its immunomodulatory effects on wound repair. Comparisons were made with the BMSC sheet induced without curcumin (CS-N) and control (saline).

Results

In vitro cultured BMSC sheets (CS-C) showed that curcumin promoted the proliferation of BMSCs and modified the features of produced extracellular matrix (ECM) secreted by BMSCs, especially the contents of ECM structural proteins such as fibronectin (FN) and collagen I and III, as well as the ratio of collagen III/I. Two-photon fluorescence (TPF) and second-harmonic generation (SHG) imaging of mouse implantation revealed superior engraftment of BMSCs, maintained for 35 days in the CS-C group. Most importantly, CS-C created a favorable immune microenvironment. The chemokine stromal cell-derived factor 1 (SDF1) was abundantly produced by CS-C, thus facilitating a mass migration of leukocytes from which significantly increased expression of signature T_H1 cells (interferon gamma) and M1 macrophages (tumor necrosis factor alpha) genes were confirmed at 7 days post-operation. The number of T_H1 cells and associated pro-inflammatory M1 macrophages subsequently decreased sharply after 14 days post-operation, suggesting a rapid type I immune regression. Furthermore, the CS-C group showed an increased trend towards M2 macrophage polarization in the early phase. CS-C led to an epidermal thickness and collagen deposition that was closer to that of normal skin.

Conclusions

Curcumin has a good regulatory effect on BMSCs and this promising CS-C biomaterial creates a pro-regenerative immune microenvironment for cutaneous wound healing.

Engineered mesenchymal stem-cell-sheets patches prevents postoperative pancreatic leakage in a rat model

Post-operative pancreatic fistula (POPF) following pancreatic resection is a life-threatening surgical complication. Cell sheets were prepared and harvested using temperature-responsive culture dishes and transplanted as patches to seal POPF. Two different mesenchymal stem cell (MSC) sheets were compared in terms of the preventative ability for pancreatic leakage in a rat model. Both rat adipose-derived stem cell (rADSC) and bone marrow-derived stem cell (rBMSC) sheets were transplanted. Those rADSC and rBMSC sheets are created without enzymes and thus maintained their cell-cell junctions and adhesion proteins with intact fibronectin on the basal side, as well as characteristics of MSCs. The rats with post-pancreatectomy rADSC- or rBMSC-sheet patches had significantly decreased abdominal fluid leakage compared with the control group, demonstrated by MR image analysis and measurement of the volume of abdominal fluid. Amylase level was significantly lower in the rats with rADSC-sheet and rBMSC-sheet patches compared with the control groups. The rADSC sheet patches had increased adhesive and immune-cytokine profiles (ICAM-1, L-selectin, TIMP-1), and the rBMSC sheets had reduced immune reactions compared to the control. This is first project looking at the feasibility of tissue engineering therapy using MSC-sheets as tissue patches preventing leakage of abdominal fluid caused by POPF.

Accelerated oral wound healing using a pre-vascularized mucosal cell sheet

Cell sheets with pre-vascularization have recently been developed but remain relatively untested in oral wound healing. Therefore, we examined the potential utility of our newly developed pre-vascularized mucosal cell sheets in oral wound healing. Mucosal keratinocytes, fibroblasts, and endothelial progenitor cells were primarily cultured for in vitro cell expansion from mucosa and blood of Sprague-Dawley rats. Mucosal cell sheets were generated using cultured keratinocytes and plasma fibrin (K sheet) or keratinocytes and a mixture of fibrin, fibroblasts, and endothelial cells (PV sheet). Autologous sheets were transplanted on deep wounds in the buccal region of rats. The gross and histological characteristics of wound healing were compared among control wound, K sheet, and PV sheet groups. We successfully cultured and expanded keratinocytes, fibroblasts, and endothelial progenitor cells in vitro for generating mucosal cell sheets with or without pre-vascularization. In the in vivo oral wound model, compared with the control wound, the PV sheet group exhibited rapid wound closure more prominently than the K sheet group. The histological healing in the PV sheet group was similar to that in rat normal buccal mucosa without fibrosis. The pre-vascularized mucosal cell sheet exhibited in vivo efficacy in oral wound healing by promoting accelerated healing.

Thermo-responsive cell culture carrier: Effects on macrophage functionality and detachment efficiency

Harvesting cultivated macrophages for tissue engineering purposes by enzymatic digestion of cell adhesion molecules can potentially result in unintended activation, altered function, or behavior of these cells. Thermo-responsive polymer is a promising tool that allows for gentle macrophage detachment without artificial activation prior to subculture within engineered tissue constructs. We therefore characterized different species of thermo-responsive polymers for their suitability as cell substrate and to mediate gentle macrophage detachment by temperature shift. Primary human monocyte- and THP-1-derived macrophages were cultured on thermo-responsive polymers and characterized for phagocytosis and cytokine secretion in response to lipopolysaccharide stimulation. We found that both cell types differentially respond in dependence of culture and stimulation on thermo-responsive polymers. In contrast to THP-1 macrophages, primary monocyte-derived macrophages showed no signs of impaired viability, artificial activation, or altered functionality due to culture on thermo-responsive polymers compared to conventional cell culture. Our study demonstrates that along with commercially available UpCell carriers, two other thermo-responsive polymers based on poly(vinyl methyl ether) blends are attractive candidates for differentiation and gentle detachment of primary monocyte-derived macrophages. In summary, we observed similar functionality and viability of primary monocyte-derived macrophages cultured on thermo-responsive polymers compared to standard cell culture surfaces. While this first generation of custom-made thermo-responsive polymers does not yet outperform standard culture approaches, our results are very promising and provide the basis for exploiting the unique advantages offered by custom-made thermo-responsive polymers to further improve macrophage culture and recovery in the future, including the covalent binding of signaling molecules and the reduction of centrifugation and washing steps. Optimizing these and other benefits of thermo-responsive polymers could greatly improve the culture of macrophages for tissue engineering applications.