Dexamethasone acetate encapsulation into Trojan particles

Dexamethasone Acetate-Loaded PLGA Nanospheres Targeting Liver Macrophages

Glucocorticoids are potent anti-inflammatory drugs, although their use is associated with severe side effects. Loading glucocorticoids into suitable nanocarriers can significantly reduce these undesirable effects. Macrophages play a crucial role in inflammation, making them strategic targets for glucocorticoid-loaded nanocarriers. The main objective of this study is to develop a glucocorticoid-loaded PLGA nanocarrier specifically targeting liver macrophages, thereby enabling the localized release of glucocorticoids at the site of inflammation. Dexamethasone acetate (DA)-loaded PLGA nanospheres designed for passive macrophage targeting are synthesized using the nanoprecipitation method. Two types of PLGA NSs in the size range of 100-300 nm are prepared, achieving a DA-loading efficiency of 19 %. Sustained DA release from nanospheres over 3 days is demonstrated. Flow cytometry analysis using murine bone marrow-derived macrophages demonstrates the efficient internalization of fluorescent dye-labeled PLGA nanospheres, particularly into pro-inflammatory macrophages. Significant down-regulation in pro-inflammatory cytokine genes mRNA is observed without apparent cytotoxicity after treatment with DA-loaded PLGA nanospheres. Subsequent experiments in mice confirm liver macrophage-specific nanospheres accumulation following intravenous administration using in vivo imaging, flow cytometry, and fluorescence microscopy. Taken together, the data show that the DA-loaded PLGA nanospheres are a promising drug-delivery system for the treatment of inflammatory liver diseases.

Poly(malic acid)-budesonide nanoconjugates embedded in microparticles for lung administration

To improve the therapeutic activity of inhaled glucocorticoids and reduce potential side effects, we designed a formulation combining the advantages of nanoparticles, which have an enhanced uptake by alveolar cells, allow targeted delivery and sustained drug release, as well as limited drug systemic passage, with those of microparticles, which display good alveolar deposition. Herein, a polymer-drug conjugate, poly(malic acid)-budesonide (PMAB), was first synthesized with either 11, 20, 33, or 43 mol% budesonide (drug:polymer from 1:8 to 3:4), the drug creating hydrophobic domains. The obtained conjugates self-assemble into nanoconjugates in water, yielding excellent drug loading of up to 73 wt%, with 80-100 nm diameters. In vitro assays showed that budesonide could be steadily released from the nanoconjugates, and the anti-inflammatory activity was preserved, as evidenced by reduced cytokine production in LPS-activated RAW 264.7 macrophages. Nanoconjugates were then embedded into microparticles through spray-drying with L-leucine, forming nano-embedded microparticles (NEMs). NEMs were produced with an aerodynamic diameter close to 1 µm and a density below 0.1 g.cm-3, indicative of a high alveolar deposition. NEMs spray-dried with the less hydrophobic nanoconjugates, PMAB 1:4, were readily dissolved in simulated lung fluid and were chosen for in vivo experiments to study pharmacokinetics in healthy rats. As it was released in vivo from NEMs, sustained distribution of budesonide was obtained for 48 h in lung tissue, cells, and lining fluid. With high loading rates, modulable release kinetics, and low cytotoxicity, these nanoconjugates delivered by NEMs are promising for the more efficient treatment of pulmonary inflammatory diseases.

Design of fluorinated stealth poly(ε-caprolactone) nanocarriers

The covalent functionalization of polymers with fluorinated moieties represents a promising strategy for the development of multimodal systems. Moreover, polymer fluorination often endows the resulting nanocarriers with improved colloidal stability in the biological environment. In this work, we developed fluorinated pegylated (PEG) biodegradable poly(ε-caprolactone) (PCL) drug nanocarriers showing both high colloidal stability and stealth properties, as well as being (19F)-Nuclear Magnetic Resonance (NMR) detectable. The optimized nanocarriers were obtained mixing a PEG-PCL block copolymer with a nonafluoro-functionalized PCL polymer. The role of PEGylation and fluorination on self-assembly and colloidal behavior of the obtained nanoparticles (NPs) was investigated, as well as their respective role on stealth properties and colloidal stability. To prove the feasibility of the developed NPs as potential 19F NMR detectable drug delivery systems, a hydrophobic drug was successfully encapsulated, and the maintenance of the relevant 19F NMR properties evaluated. Drug-loaded fluorinated NPs still retained a sharp and intense 19F NMR signal and good relaxivity parameters (i.e., T1 and T2 relaxation times) in water, which were not impaired by drug encapsulation.

Nanostructured Lipid Carriers for Enhanced Transscleral Delivery of Dexamethasone Acetate: Development, Ex Vivo Characterization and Multiphoton Microscopy Studies

Corticosteroids, although highly effective for the treatment of both anterior and posterior ocular segment inflammation, still nowadays struggle for effective drug delivery due to their poor solubilization capabilities in water. This research work aims to develop nanostructured lipid carriers (NLC) intended for periocular administration of dexamethasone acetate to the posterior segment of the eye. Pre-formulation studies were initially performed to find solid and liquid lipid mixtures for dexamethasone acetate solubilization. Pseudoternary diagrams at 65 °C were constructed to select the best surfactant based on the macroscopic transparency and microscopic isotropy of the systems. The resulting NLC, obtained following an organic solvent-free methodology, was composed of triacetin, Imwitor® 491 (glycerol monostearate >90%) and tyloxapol with Z-average = 106.9 ± 1.2 nm, PDI = 0.104 ± 0.019 and zeta potential = -6.51 ± 0.575 mV. Ex vivo porcine sclera and choroid permeation studies revealed a considerable metabolism in the sclera of dexamethasone acetate into free dexamethasone, which demonstrated higher permeation capabilities across both tissues. In addition, the NLC behavior once applied onto the sclera was further studied by means of multiphoton microscopy by loading the NLC with the fluorescent probe Nile red.

Biopolymer Lipid Hybrid Microcarrier for Transmembrane Inner Ear Delivery of Dexamethasone

Dexamethasone is one of the most often used corticosteroid drugs for sensorineural hearing loss treatment, and is used either by intratympanic injection or through systemic delivery. In this study, a biopolymer lipid hybrid microcarrier was investigated for enhanced local drug delivery and sustained release at the round window membrane level of the middle ear for the treatment of sensorineural hearing loss (SNHL). Dexamethasone-loaded and dexamethasone-free microparticles were prepared using biopolymers (polysaccharide and protein, pectin and bovine serum albumin, respectively) combined with lipid components (phosphatidylcholine and Dimethyldioctadecylammonium bromide) in order to obtain a biopolymer–liposome hybrid system, with a complex structure combining to enhance performance in terms of physical and chemical stability. The structure of the microparticles was evaluated by FTIR, XRD, thermal analysis, optical microscopy, and scanning electron microscopy (SEM). The encapsulation efficiency determination and the in vitro Dexamethasone release study were performed using UV-Vis spectroscopy. The high value of encapsulation efficiency and the results of the release study indicated six days of sustained release, encouraging us to evaluate the in vitro cytotoxicity of Dexamethasone-loaded microparticles and their influence on the cytotoxicity induced by Cisplatin on auditory HEI-OC1 cells. The results show that the new particles are able to protect the inner ear sensory cells.

Improving dexamethasone drug loading and efficacy in treating arthritis through a lipophilic prodrug entrapped into PLGA-PEG nanoparticles

Targeted delivery of dexamethasone to inflamed tissues using nanoparticles is much-needed to improve its efficacy while reducing side effects. To drastically improve dexamethasone loading and prevent burst release once injected intravenously, a lipophilic prodrug dexamethasone palmitate (DXP) was encapsulated into poly(DL-lactide-co-glycolide)-polyethylene glycol (PLGA-PEG) nanoparticles (NPs). DXP-loaded PLGA-PEG NPs (DXP-NPs) of about 150 nm with a drug loading as high as 7.5% exhibited low hemolytic profile and cytotoxicity. DXP-NPs were able to inhibit the LPS-induced release of inflammatory cytokines in macrophages. After an intravenous injection to mice, dexamethasone (DXM) pharmacokinetic profile was also significantly improved. The concentration of DXM in the plasma of healthy mice remained high up to 18 h, much longer than the commercial soluble drug dexamethasone phosphate (DSP). Biodistribution studies showed lower DXM concentrations in the liver, kidneys, and lungs when DXP-NPs were administered as compared with the soluble drug. Histology analysis revealed an improvement in the knee structure and reduction of cell infiltration in animals treated with the encapsulated DXP compared with the soluble DSP or non-treated animals. In summary, the encapsulation of a lipidic prodrug of dexamethasone into PLGA-PEG NPs appears as a promising strategy to improve the pharmacological profile and reduce joint inflammation in a murine model of rheumatoid arthritis.

Integration of lornoxicam nanocrystals into hydroxypropyl methylcellulose-based sustained release matrix to form a novel biphasic release system

The study aims to (a) enhance the solubility of a poorly soluble drug by optimization of nanocrystal formulation using the top-down approach and (b) modify the release profile of this drug, which exhibits a short elimination half-life, by the integration of a fast-release phase containing the optimized nanocrystals and a sustained-release phase in a compression-coated tablet. Nanocrystals of the model drug (lornoxicam; LNX) was prepared by simultaneous application of jet-milling and ball-milling techniques. Investigation of the precipitation inhibition capacity, thermal property, and interaction of different polymers with the drug revealed polyvinyl pyrrolidone K30 (PVP) as the most effective stabilizer for nanocrystals. The immediate-release layer containing the optimized nanocrystals (size of 279.5 ± 11.25 nm and polydispersity index of 0.204 ± 0.01) was then compressed on a zero-order sustained-release matrix core using different derivatives of hydroxypropyl methylcellulose (HPMC). Application of the Design of Experiment approach (DoE) was applied to optimize the formulation of tablet. Analysis of drug concentration in dog plasma by liquid chromatography-tandem mass spectrometry demonstrated an improvement in the release behavior of LNX from the optimal compression-coated tablet integrating a HPMC-based sustained release matrix core and a PVP-stabilized lornoxicam nanocrystals coating layer compared to the reference product.

Recent Advances in the Local Drug Delivery Systems for Improvement of Anticancer Therapy

The conventional anticancer chemotherapies not only cause serious toxic effects, but also produce resistance in tumor cells exposed to long-term therapy. Usually, the killing of metastasized cancer cells requires long-term therapy with higher drug doses, because the cancer cells develop resistance due to the induction of poly-glycoproteins (P-gps) that act as a transmembrane efflux pump to transport drugs out of the cells. During the last few decades, scientists have been exploring new anticancer drug delivery systems such as microencapsulation, hydrogels, and nanotubes to improve bioavailability, reduce drug-dose requirement, decrease multiple drug resistance, and to save normal cells as non-specific targets. Hopefully, the development of novel drug delivery vehicles (nanotubes, liposomes, supramolecules, hydrogels, and micelles) will assist to deliver drug molecules at the specific target site and reduce the undesirable side effects of anticancer therapies in humans. Nanoparticles and lipid formulations are also designed to deliver small drug payload at the desired tumor cell sites for their anticancer actions. This review will focus on the recent advances in the drug delivery systems, and their application in treating different cancer types in humans.

Mannosylation Of Budesonide Palmitate Nanoprodrugs For Improved Macrophage Targeting

In a strategy to improve macrophage targeting of glucocorticoids (GCs) for anti-inflammatory therapy, a so-called nanoprodrug of budesonide palmitate decorated by mannose moieties was designed. The synthesis of budesonide palmitate (BP) was obtained by esterification and mannosylated lipid (DSPE-PEG-Man) by reacting 1,2-Distearoyl-sn-Glycero-3-Phosphoethanolamine (DSPE)-polyethylene glycol-amine and α-D-mannopyranosylphenyl isothiocyanate (MPITC). Nanoparticles were formulated by emulsion-evaporation and different ratios of mannosylated lipid were introduced in the formulation of BP nanoprodrugs. Using up to 75% of DSPE-PEG-man (75/25) led to 200 nm particles with a polydispersity index below 0.2, a negative zeta potential ranging from -10 to -30 mV, and one-month stability at 4°C. The encapsulation efficiency of BP approached 100% proving that the prodrug was associated with the particles, leading to a final BP loading of 50-to 60% (w/w). The lectin agglutination test confirmed the availability of mannose on the nanoprodrug surface. Nanoprodrug uptake by RAW 264.7 macrophages was observed by confocal microscopy and flow cytometry. After 24 and 48 hours of incubation, a significantly greater internalization of mannosylated nanoparticles as compared to PEGylated nanoparticles was achieved. The mannose receptor-mediated uptake was confirmed by a mannan inhibition study. After LPS-induced inflammation, the anti-inflammatory effect of mannosylated nanoparticles was assessed. After 48 hours of incubation, cytokines (MCP-1 and TNFα) were reduced demonstrating that the functionalization of nanoprodrugs is possible and efficient.

Tiny dexamethasone palmitate nanoparticles for intravitreal injection: Optimization and in vivo evaluation

Tiny nanoparticles of dexamethasone palmitate (DXP) were designed as transparent suspensions for intravitreal administration to treat age-related macular degeneration (AMD). The influence of three surfactants (PEG-40-stearate and Pluronic block copolymers F68 and F127) on nanoparticles size and stability was investigated and led to an optimal formulation based on Pluronic F127 stabilizing DXP nanoparticles. Size measurements and TEM revealed tiny nanoparticles (around 35 nm) with a low opacity, compatible with further intravitreal injection. X-Ray powder diffraction (XRPD) and transmission electronic microscopy (TEM) performed on freeze-dried samples showed that DXP nanoparticles were rather monodisperse and amorphous. The efficacy of DXP nanoparticles was assessed in vivo on pigmented rabbits with unilateral intravitreal injections. After breakdown of the blood-retinal barrier (BRB) induced by injection of rhVEGF165 with carrier protein, DXP nanoparticles induced a restoration of the BRB 1 month after their intravitreal injection. However, their efficacy was limited in time most probably by clearance of DXP nanoparticles after 2 months due to their small size.

Combining dexamethasone and TNF-α siRNA within the same nanoparticles to enhance anti-inflammatory effect

We propose to combine two therapeutic anti-inflammatory approaches with different mechanisms of action in a single drug delivery system consisting of cationic dexamethasone palmitate nanoparticles (CDXP-NP) associated with TNF-α siRNA. The CDXP-NPs are obtained by the solvent emulsion evaporation technique using dexamethasone palmitate, a prodrug of dexamethasone, associated with a cationic lipid, DOTAP. Their physicochemical properties as well as their ability to bind siRNA were evaluated through gel electrophoresis and siRNA binding quantification. SiRNA cellular uptake was assessed by flow cytometry and confocal microscopy on RAW264.7 macrophages. TNF-α inhibition was determined on LPS-activated RAW264.7 macrophages. Stable and monodisperse nanoparticles around 100 nm with a positive zeta potential (+59 mV) were obtained with an encapsulation efficiency of the prodrug of 95%. A nitrogen/phosphate (N/P) ratio of 10 was selected that conferred the total binding of siRNA to the nanoparticles. Using these CDXP-siRNA-NPs, the siRNA was strongly internalized by RAW264.7 macrophage cells and localized within the cytoplasm. On the LPS-induced RAW264.7 macrophages, a larger inhibition of TNF-α was observed with CDXP-siRNA-NPs compared to CDXP-NPs alone. In conclusion, from these data, it is clear that a combination of DXP and TNF-α siRNA therapy could be a novel strategy and optimized alternative approach to cure inflammatory diseases.

Nanomedicines for the delivery of glucocorticoids and nucleic acids as potential alternatives in the treatment of rheumatoid arthritis

Rheumatoid arthritis (RA) is a chronic autoimmune disease that affects 0.5-1% of the world population. Current treatments include on one hand non-steroidal anti-inflammatory drugs and glucocorticoids (GCs) for treating pain and on the other hand disease-modifying anti-rheumatic drugs such as methotrexate, Janus kinase inhibitors or biologics such as antibodies targeting mainly cytokine expression. More recently, nucleic acids such as siRNA, miRNA, or anti-miRNA have shown strong potentialities for the treatment of RA. This review discusses the way nanomedicines can target GCs and nucleic acids to inflammatory sites, increase drug penetration within inflammatory cells, achieve better subcellular distribution and finally protect drugs against degradation. For GCs such a targeting effect would allow the treatment to be more effective at lower doses and to reduce the administration frequency as well as to induce much fewer side-effects. In the case of nucleic acids, particularly siRNA, knocking down proteins involved in RA, could importantly be facilitated using nanomedicines. Finally, the combination of both siRNA and GCs in the same carrier allowed for the same cell to target both the GCs receptor as well as any other signaling pathway involved in RA. Nanomedicines appear to be very promising for the delivery of conventional and novel drugs in RA therapeutics. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Celastrol-Loaded Galactosylated Liposomes Effectively Inhibit AKT/c-Met-Triggered Rapid Hepatocarcinogenesis in Mice

Our previous study proved that celastrol was a potential candidate for hepatocellular carcinoma (HCC) therapy. However, poor water solubility and toxic side effects may restrict its clinical application. To overcome these shortcomings and optimize its antitumor efficacy, we developed galactosylated liposomes using galactose-modified 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol) to deliver celastrol (C-GPL). C-GPL improved the water solubility of celastrol and exhibited high encapsulation efficiency, good stability in serum, and slow drug release profile. In vitro studies showed that C-GPL increased the cellular uptake of celastrol through receptor-mediated endocytosis, thereby enhancing celastrol cytotoxicity and cancer cell apoptosis. Particularly, in vivo antitumor activity of C-GPL was assessed in rapid HCC mouse models established via hydrodynamic transfection of the activated forms of AKT and c-Met. Compared to free celastrol, C-GPL significantly prevented liver weight gain, decreased liver damage biomarkers (glutamic-oxalacetic transaminase and alanine aminotransferase) and HCC marker (alpha-fetoprotein), and led to tumor disappearance on the liver surface. The improved therapeutic effect of C-GPL may be attributed to suppression of AKT activation, induction of apoptosis, and retardation of cell proliferation. Importantly, C-GPL exerted low toxicity to normal tissues without causing severe weight loss in mice. Taken together, C-GPL may become a promising drug delivery system for HCC treatment.

Controlling protein interactions in blood for effective liver immunosuppressive therapy by silica nanocapsules

Immunosuppression with glucocorticoids is a common treatment for autoimmune liver diseases and after liver transplant, which is however associated with severe side-effects. Targeted delivery of glucocorticoids to inflammatory cells, e.g. liver macrophages and Kupffer cells, is a promising approach for minimizing side effects. Herein, we prepare core-shell silica nanocapsules (SiO₂ NCs) via a sol-gel process confined in nanodroplets for targeted delivery of dexamethasone (DXM) for liver immunosuppressive therapy. DXM with concentrations up to 100 mg mL^-1 in olive oil are encapsulated while encapsulation efficiency remains over 95% after 15 days. Internalization of NCs by non-parenchymal murine liver cells significantly reduces the release of inflammatory cytokines, indicating an effective suppression of inflammatory response of liver macrophages. Fluorescent and magnetic labeling of the NCs allows for monitoring their intracellular trafficking and biodegradation. Controlled interaction with blood proteins and good colloidal stability in blood plasma are achieved via PEGylation of the NCs. Specific proteins responsible for stealth effect, such as apolipoprotein A-I, apolipoprotein A-IV, and clusterin, are present in large amounts on the PEGylated NCs. In vivo biodistribution investigations prove an efficient accumulation of NCs in the liver, underlining the suitability of the SiO₂ NCs as a dexamethasone carrier for treating inflammatory liver diseases.

Trojan Microparticles Potential for Ophthalmic Drug Delivery

The administration of drugs to treat ocular disorders still remains a technological challenge in this XXI century. Although there is an important arsenal of active molecules useful to treat ocular diseases, ranging from classical compounds to biotechnological products, currenty, no ideal delivery system is able to profit all their therapeutic potential. Among the Intraocular Drug Delivery Systems (IODDS) proposed to overcome some of the most important limitations, microsystems and nanosystems have raised high attention. While microsystems are able to offer long-term release after intravitreal injection, nanosystems can protect the active compound from external environment (reducing their clearance) and direct it to its target tissues. In recent years, some researchers have explored the possibility of combining micro and nanosystems in "Nanoparticle-in-Microparticle (NiMs)" systems or "trojan systems". This excellent idea is not exempt of technological problems, remains partially unsolved, especially in the case of IODDS. The objective of the present review is to show the state of art concerning the design, preparation and characterization of trojan microparticles for drug delivery and to remark their potential and limitations as IODDS, one of the most important challenges faced by pharmaceutical technology at the moment.

Nanoscale Lipophilic Prodrugs of Dexamethasone with Enhanced Pharmacokinetics

The encapsulation of glucocorticoids, such as dexamethasone, in nanoparticles (NPs) faces two main issues: a low drug loading and the destabilization of the nanoparticle suspension due to drug crystallization. Here, we successfully formulated a prodrug of dexamethasone, dexamethasone palmitate (DXP), into nanoparticles stabilized by the sole presence of distearoyl- sn-glycero-3-phosphoethanolamine- N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG₂₀₀₀). Two formulation processes, nanoprecipitation and emulsion-evaporation, allowed the formation of stable nanoparticles. By adjusting the drug/lipid ratio and the DXP concentration, nanoparticles of DXP (DXP-NPs) with a size between 130 and 300 nm can be obtained. Owing to the presence of DSPE-PEG₂₀₀₀, a high drug entrapment efficiency of 98% w/w was reached for both processes, corresponding to a very high equivalent dexamethasone drug loading of around 50% w/w in the absence of crystallization upon storage at 4 °C. The anti-inflammatory activity of DXP-NPs was preserved when incubated with macrophages activated with lipopolysaccharide. Pharmacokinetics parameters were evaluated after intravenous (IV) injection of DXP-NPs to healthy mice. The release of DXM from DXP-NPs in plasma was clearly controlled up to 18 h compared with the free drug, which was rapidly eliminated from plasma after administration. In conclusion, a novel type of nanoparticle combining the advantages of prodrugs and nanoparticles was designed, easy to produce with a high loading efficiency and leading to modified pharmacokinetics and tissue distribution after IV administration.

Optimization of rhein-loaded polymeric nanoparticles using a factorial design and evaluation of the cytotoxic and anti-inflammatory effects

The aim of the work was to develop rhein loaded polymeric nanoparticles (R-PNPs). Nanoparticles were prepared by three methods, solvent emulsion-evaporation, double emulsion, and nanoprecipitation, by means of experimental design. Additionally, the effects of the best formulation on in vitro cytotoxicity and inflammation were evaluated. The solvent emulsion-evaporation method presented the highest encapsulation efficiency of the three techniques (38.41%), as well as had a mean diameter of 189.33 nm and a polydispersity index of less than 0.1. Despite efforts to optimize the encapsulation of rhein, the drug release from nanoparticles was close to 50% during the first 5 min, followed by a continuous release within 60 min. It was observed that macrophages exposed to the highest concentration of R-PNPs showed cell viability about 80% and at the lowest nanoparticle concentrations was closed to 100%. IL-1β in cell culture supernatants was decreased in the presence of R-PNPs and TNFα concentrations were lower than the sensitivity of the assay. ROS production was only inhibited with R-PNPs at concentrations of 2.5 and 5 μM. In conclusion, the solvent emulsion-evaporation was the best method evaluated to obtain nanoparticles with the desired specifications. It was possible to assess R-PNPs with low cytotoxicity and anti-inflammatory properties showed by the inhibition of IL-1β production and a low decrease in ROS production.

Characterization and Molecular Mechanism of Peptide-Conjugated Gold Nanoparticle Inhibiting p53-HDM2 Interaction in Retinoblastoma

Inhibition of the interaction between p53 and HDM2 is an effective therapeutic strategy in cancers that harbor a wild-type p53 protein such as retinoblastoma (RB). Nanoparticle-based delivery of therapeutic molecules has been shown to be advantageous in localized delivery, including to the eye, by overcoming ocular barriers. In this study, we utilized biocompatible gold nanoparticles (GNPs) to deliver anti-HDM2 peptide to RB cells. Characterization studies suggested that GNP-HDM2 was stable in biologically relevant solvents and had optimal cellular internalization capability, the primary requirement of any therapeutic molecule. GNP-HDM2 treatment in RB cells in vitro suggested that they function by arresting RB cells at the G2M phase of the cell cycle and initiating apoptosis. Analysis of molecular changes in GNP-HDM2-treated cells by qRT-PCR and western blotting revealed that the p53 protein was upregulated; however, transactivation of its downstream targets was minimal, except for the PUMA-BCl2 and Bax axis. Global gene expression and in silico bioinformatic analysis of GNP-HDM2-treated cells suggested that upregulation of p53 might presumptively mediate apoptosis through the induction of p53-inducible miRNAs.

Overview of biopolymers as carriers of antiphlogistic agents for treatment of diverse ocular inflammations

Inflammation of the eye is a usual clinical condition that can implicate any part of the eye. The nomenclature of variety of such inflammations is based on the ocular part involved. These diseases may jeopardize normal functioning of the eye on progression. In general, corticosteroids, antihistamines, mast cell stabilizers and non-steroidal anti-inflammatory drugs (NSAIDs) are used to treat inflammatory diseases/disorders of the eye. There have been several attempts via different approaches of drug delivery to overcome the low ocular bioavailability resulting from shorter ocular residence time. The features like safety, ease of elimination and ability to sustain drug release have led to application of biopolymers in ocular therapeutics. Numerous polymers of natural origin such as gelatin, collagen, chitosan, albumin, hyaluronic acid, alginates etc. have been successfully employed for preparation of different ocular dosage forms. Chitosan is the most explored biopolymer amongst natural biopolymers because of its inherent characteristics. The emergence of synthetic biopolymers (like PVP, PACA, PCL, POE, polyanhydrides, PLA, PGA and PLGA) has also added new dimensions to the drug delivery strategies meant for treatment of ophthalmic inflammations. The current review is an endeavor to describe the utility of a variety of biomaterials/polymers based drug delivery systems as carrier for anti-inflammatory drugs in ophthalmic therapeutics.

Delivery strategies for treatment of age-related ocular diseases: From a biological understanding to biomaterial solutions

Age-related ocular diseases, such as age-related macular degeneration (AMD), diabetic retinopathy, and glaucoma, result in life-long functional deficits and enormous global health care costs. As the worldwide population ages, vision loss has become a major concern for both economic and human health reasons. Due to recent research into biomaterials and nanotechnology major advances have been gained in the field of ocular delivery. This review provides a summary and discussion of the most recent strategies employed for the delivery of both drugs and cells to the eye to treat a variety of age-related diseases. It emphasizes the current challenges and limitations to ocular delivery and how the use of innovative materials can overcome these issues and ultimately provide treatment for age-related degeneration and regeneration of lost tissues. This review also provides critical considerations and an outlook for future studies in the field of ophthalmic delivery.

Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers

Spray-drying is a rapid, continuous, cost-effective, reproducible and scalable process for the production of dry powders from a fluid material by atomization through an atomizer into a hot drying gas medium, usually air. Often spray-drying is considered only a dehydration process, though it also can be used for the encapsulation of hydrophilic and hydrophobic active compounds within different carriers without substantial thermal degradation, even of heat-sensitive substances due to fast drying (seconds or milliseconds) and relatively short exposure time to heat. The solid particles obtained present relatively narrow size distribution at the submicron-to-micron scale. Generally, the yield% of spray-drying at laboratory scale with conventional spray-dryers is not optimal (20-70%) due to the loss of product in the walls of the drying chamber and the low capacity of the cyclone to separate fine particles (<2 μm). Aiming to overcome this crucial drawback in early development stages, new devices that enable the production of submicron particles with high yield, even for small sample amounts, have been introduced into the market. This review describes the most outstanding advantages and challenges of the spray-drying method for the production of pure drug particles and drug-loaded polymeric particles and discusses the potential of this technique and the more advanced equipment to pave the way toward reproducible and scalable processes that are critical to the bench-to-bedside translation of innovative pharmaceutical products.

Probing single-cell mechanics with picosecond ultrasonics

The mechanical properties of cells play a key role in several fundamental biological processes, such as migration, proliferation, differentiation and tissue morphogenesis. The complexity of the inner cell composition and the intricate meshwork formed by transmembrane cell-substrate interactions demands a non-invasive technique to probe cell mechanics and cell adhesion at a subcell scale. In this paper we review the use of laser-generated GHz acoustic waves--a technique called picosecond ultrasonics (PU)--to probe the mechanical properties of single cells. We first describe applications to vegetal cells and biomimetic systems. We show how these systems can be used as simple models to understand more complex animal cells. We then present an opto-acoustic bio-transducer designed for in vivo measurements in physiological conditions. We illustrate the use of this transducer through the simultaneous probing of the density and compressibility of Allium cepa cells. Finally, we demonstrate that this technique can quantify animal-cell adhesion on metallic surfaces by analyzing the acoustic pulses reflected off the cell-metal interface. This innovative approach allows investigating quantitatively cell mechanics without fluorescent labels or mechanical contact to the cell.

Stimuli responsive drug delivery application of polymer and silica in biomedicine

In the last decade, using polymer and mesoporous silica materials as efficient drug delivery carriers has attracted great attention.

Evaluation of characteristics and in vitro antioxidant properties of RSV loaded hyaluronic acid-DPPC microparticles as a wound healing system

Resveratrol (RSV) was incorporated into microparticles by spray drying to treat chronic wounds such as diabetic ulcers. RSV was chosen due to its defense mechanisms as the formation of free radicals delays the healing process. RSV was loaded into microparticles consisting of dipalmitoylphosphatidylcholine (DPPC) and hyaluronic acid (HA), a polysaccharide naturally present within the skin, known to contribute to the healing process. Microparticles were evaluated in terms of production yield, size distribution, encapsulation efficiency, morphology, specific surface area, thermal properties and water content. Spherical and homogenous microparticles (span ≤ 2) in a size range between 20 and 30 μm were obtained with high encapsulation efficiency (≥ 97%). The effect of enzymes (hyaluronidase, phospholipase and lipase) on RSV release showed a dose-dependent pattern followed by a slow release stage. Cytotoxicity/proliferation and oxidative stress parameters (glutathione, oxidized glutathione, glutathione peroxidase, malondialdehyde, superoxide dismutase) obtained from human dermal fibroblast cell cultures revealed that formulations increased cell proliferation and the presence of RSV decreased oxidation in cells. RSV-loaded HA-DPPC microparticles appear as a promising formulation for wound healing due to synergistic effect of the ingredients.

Modified titanium implant as a gateway to the human body: the implant mediated drug delivery system

The aim of this study was to investigate the efficacy of a proposed new implant mediated drug delivery system (IMDDS) in rabbits. The drug delivery system is applied through a modified titanium implant that is configured to be implanted into bone. The implant is hollow and has multiple microholes that can continuously deliver therapeutic agents into the systematic body. To examine the efficacy and feasibility of the IMDDS, we investigated the pharmacokinetic behavior of dexamethasone in plasma after a single dose was delivered via the modified implant placed in the rabbit tibia. After measuring the plasma concentration, the areas under the curve showed that the IMDDS provided a sustained release for a relatively long period. The result suggests that the IMDDS can deliver a sustained release of certain drug components with a high bioavailability. Accordingly, the IMDDS may provide the basis for a novel approach to treating patients with chronic diseases.

The role of payload hydrophobicity in nanotherapeutic pharmacokinetics

Although drug delivery with nanovectors is regarded as one of the paradigm-shifting advances in modern medicine, the compatibility and performance of drug-vector formulations have not been systematically studied in terms of their physicochemistry and pharmacokinetics (PKs). The drug delivery systems (DDSs), currently available in clinics or trials, were analyzed based on hydrophobicity and anatomical therapeutic chemical (ATC) classification of drug payloads. Four major types of DDSs differentiated based on DDS structure and drug hydrophobicity, where payload hydrophobicity decreased: micelles, serum albumin, liposome membrane, and liposome interior. A strong relationship between the increase in half-life in DDS formulation and drug hydrophobicity was found with up to 200-fold greater increase for hydrophilic drugs. The analysis results seemingly integrated PKs, ATC, and hydrophobicity to reinforce the development or optimization of drug delivery vectors and their formulations.

Drug delivery to the posterior segment of the eye for pharmacologic therapy

Treatment of diseases of the posterior segment of the eye, such as age-related macular degeneration, cytomegalovirus retinitis, diabetic retinopathy, posterior uveitis and retinitis pigmentosa, requires novel drug delivery systems that can overcome the many barriers for efficacious delivery of therapeutic drug concentrations. This challenge has prompted the development of biodegradable and nonbiodegradable sustained-release systems for injection or transplantation into the vitreous as well as drug-loaded nanoparticles, microspheres and liposomes. These drug delivery systems utilize topical, systemic, subconjunctival, intravitreal, transscleral and iontophoretic routes of administration. The focus of research has been the development of methods that will increase the efficacy of spatiotemporal drug application, resulting in more successful therapy for patients with posterior segment diseases. This article summarizes recent advances in the research and development of drug delivery methods of the posterior chamber of the eye, with an emphasis on the use of implantable devices as well as micro- and nanoparticles.

Polymeric delivery systems for dexamethasone

Glucocorticoids (GCs) are broadly used in the treatment of inflammation and in suppressing hyperactivity of the immune system expressed in allergies, asthma, autoimmune diseases and sepsis. They are pleiotropic in nature, showing a wide range of diverse effects, including those which are harmful for the organism. Dexamethasone (DEX) is one of the most frequently used GCs and is considered as one of the safest. Still serious side-effects have been observed for this drug, mostly due to its hydrophobicity and low bioavailability. The potentially promising polymeric carrier systems to deliver DEX effectively are revised.

Sequential ionic and thermogelation of chitosan spherical hydrogels prepared using superhydrophobic surfaces to immobilize cells and drugs

Chitosan is soluble in acidic media, which makes it incompatible for the encapsulation of cells and pH-sensitive molecules. In this work, a mild chitosan-based system with two sequential gelation steps is proposed, where the model drug dexamethasone and L929 cells are immobilized inside hydrogel beads. Superhydrophobic surfaces were used to produce the spherical hydrogel particles that provided favorable conditions to encapsulate cells or bioactive agents. First, the chitosan acidic solution was neutralized with β-glycerophosphate at room temperature to pH 6.2. Suspended cells (or dexamethasone) in the formulation were dispensed in controlled volumes onto biomimetic polystyrene superhydrophobic surfaces, to form spherical shapes. The addition of sodium tripolyphosphate on the top of each sphere induced an ionic gelation process of the chitosan through electrostatic interactions. At 37°C, the hydrophobicity of the chitosan-based formulations increased and a second gelation step occurred, which increased the elastic modulus. In addition, the pH-responsive behavior characteristic of chitosan was maintained. The softness and flexibility of the system can potentially be utilized to implant cells and therapeutic molecules using less invasive procedures.

Driving the interactions between organic nanoparticles and phospolipidic membranes by an easy treatment of the surface stabilizer

Polymer-stabilized perylene nanoparticles were prepared through a solvent exchange method. The formation of the nanostructures in aqueous solution was confirmed by the appearance of a red-shifted emission attributable to the formation of excimer-like aggregates. The behavior of organic nanostructures in the presence of lipid vesicles was investigated through steady-state and time-resolved fluorescence measurements. When no further surface treatment is applied to the nanoparticles, changes in the decay times and emission spectra demonstrate that inside the lipid bilayers the nanoparticles redissolve into the monomeric form with a rate and efficiency determined by the working temperature (above and below the transition temperature Tm of the phospholipid). On the other hand, when the stabilized shell is UV-cured to induce photo-cross-linking of the polymeric chains, the nanoparticle stability increases and their redissolution in the membrane is prevented. Confocal fluorescence images support the data obtained in bulk. The results indicate that the prepared nanostructures could be successfully used either as nanometric carriers for the delivery of poor water-soluble lipophilic compounds or as imaging tools depending on the rigidity/cross-linking degree of their polymeric stabilizer shell.

Production of nanoparticles-in-microparticles by a double emulsion method: a comprehensive study

A method based on a double emulsion system (solid-in-water-in-oil-in-water) has been developed for the production of nanoparticles-in-microparticles (NIMs). The distribution of nanoparticles within the NIMs was explored using light and electron microscopy and through assessment of drug loading and release profiles. The extent of nanoparticle entrapment within the NIMs was found to be dependent on the state (wet vs. dry) in which the nanoparticles were introduced to the formulation. The technique was readily adaptable to produce NIMs of different morphologies. It is proposed that NIMs and this method to produce them have broad application in drug delivery research.

In vitro characterization and in vivo evaluation of nanostructured lipid curcumin carriers for intragastric administration

Background

Curcumin has a variety of pharmacological effects. However, poor water solubility and low oral bioavailability limit its clinical utility. A delivery system for nanostructured lipid carriers has been reported to be a promising approach to enhancing the oral absorption of curcumin. The aim of the present study was to investigate the pharmacokinetics, tissue distribution, and relative bioavailability of curcumin in rats after a single intragastric dose of a nanostructured lipid curcumin carrier formulation.

Methods

Nanostructured lipid curcumin carriers were prepared using the ethanol dripping method and characterized in terms of the particle size, polydispersity index, zeta potential, differential scanning calorimetry, drug-loading capacity, encapsulation efficiency, and in vitro release. The pharmacokinetics and tissue distribution of nanostructured lipid curcumin carriers and curcumin suspension were compared after intragastric administration.

Results

Nanostructured lipid curcumin carriers showed a significantly higher peak plasma concentration (564.94 ± 14.98 ng/mL versus 279.43 ± 7.21 ng/mL, P < 0.01), a shorter time taken to reach peak plasma concentration (0.5 ± 0.01 hour versus 1.0 ± 0.12 hour, P < 0.01), and a greater AUC_0–∞ (820.36 ± 25.11 mg × hour/L versus 344.11 ± 10.01 mg × hour/L, P < 0.05) compared with curcumin suspension. In the tissue distribution studies, curcumin could be detected in the spleen, heart, liver, kidneys, lungs, and brain. Following intragastric administration of the nanostructured lipid curcumin carrier formulation, tissue concentrations of curcumin also increased, especially in the brain. The nanostructured lipid curcumin carrier formulation improved the ability of curcumin to cross the blood–brain barrier, with an 11.93-fold increase in the area under the curve achieved in the brain when compared with curcumin suspension.

Conclusion

The nanostructured lipid carrier formulation significantly improved the oral bioavailability of curcumin and represents a promising method for its oral delivery.

Advances in biomimetic regeneration of elastic matrix structures

Elastin is a vital component of the extracellular matrix, providing soft connective tissues with the property of elastic recoil following deformation and regulating the cellular response via biomechanical transduction to maintain tissue homeostasis. The limited ability of most adult cells to synthesize elastin precursors and assemble them into mature crosslinked structures has hindered the development of functional tissue-engineered constructs that exhibit the structure and biomechanics of normal native elastic tissues in the body. In diseased tissues, the chronic overexpression of proteolytic enzymes can cause significant matrix degradation, to further limit the accumulation and quality (e.g., fiber formation) of newly deposited elastic matrix. This review provides an overview of the role and importance of elastin and elastic matrix in soft tissues, the challenges to elastic matrix generation in vitro and to regenerative elastic matrix repair in vivo, current biomolecular strategies to enhance elastin deposition and matrix assembly, and the need to concurrently inhibit proteolytic matrix disruption for improving the quantity and quality of elastogenesis. The review further presents biomaterial-based options using scaffolds and nanocarriers for spatio-temporal control over the presentation and release of these biomolecules, to enable biomimetic assembly of clinically relevant native elastic matrix-like superstructures. Finally, this review provides an overview of recent advances and prospects for the application of these strategies to regenerating tissue-type specific elastic matrix structures and superstructures.

Successful factorial design for the optimization of methylprednisolone encapsulation in biodegradable nanoparticles

Due to their crystalline nature, the encapsulation of hydrophobic corticosteroids within polymeric nanoparticles by o/w solvent evaporation method is often difficult to achieve. The aim of this study was to evaluate the effect of both process and formulation parameters on the encapsulation of a model corticosteroid: methylprednisolone (MP). For this purpose, a 3(2)factorial design was performed evaluating the effects of the concentration of emulsifiers and sonication time on the manufactured nanoparticles, followed by a multiresponse optimization. The study also included the evaluation of other parameters such as the type of organic solvent used, polymer characteristics and the initial mass of drug. The optimal nanoparticle formulation using 0.25% (w/v) of emulsifying agent (Polyvinyl-alcohol, PVA) and 5 min of sonication was then characterized. The highest encapsulation was obtained with an organic phase consisting of acetone: dichloromethane (1:1), polyD,L-lactide-co-glycolide (PLGA) 50:50 as polymer and an initial mass of 6.6 mg of methylprednisolone. Nanoparticles size and ζ potential of optimized formulation were respectively around 230 nm and -14 mV. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) demonstrated that the drug was molecularly dispersed within the nanoparticles. Release study showed that MP-loaded nanoparticles sustained drug release for up to 120 h. This study reflects the importance of factorial design to optimize the manufacture of nanoparticles encapsulating hydrophobic drugs.

Engineered PLGA nano- and micro-carriers for pulmonary delivery: challenges and promises

Objectives

The aim of this review is to summarize the current state-of-the-art in poly(lactic-co-glycolic acid) (PLGA) carriers for inhalation. It presents the rational of use, the potential and the recent advances in developing PLGA microparticles and nanoparticles for pulmonary delivery. The most promising particle engineering strategies are discussed, highlighting the advantages along with the major challenges for researchers working in this field.

Key findings

Biodegradable polymer carriers, such as PLGA particles, may permit effective protection and long-term delivery of the inhaled drug and, when adequately engineered, its efficient transport to the target. The carrier can be designed for inhalation on the basis of several strategies through the adequate combination of available particle technologies and excipients. In so doing, the properties of PLGA particles can be finely tuned at micro-size and nano-size level to fulfill specific therapeutic needs. This means not only to realize optimal in vitro/in vivo lung deposition of the formulation, which is still crucial, but also to control the fate of the drug in the lung after particle landing.

Summary

Although many challenges still exist, PLGA carriers may be highly beneficial and present a new scenario for patients suffering from chronic lung diseases and for pharmaceutical companies working to develop novel inhaled products.