Preparation of budesonide-loaded porous PLGA microparticles and their therapeutic efficacy in a murine asthma model

A Review on Micro and Nanoengineering in Powder-Based Pulmonary Drug Delivery

Pulmonary delivery of drugs has emerged as a promising approach for the treatment of both lung and systemic diseases. Compared to other drug delivery routes, inhalation offers numerous advantages including high targeting, fewer side effects, and a huge surface area for drug absorption. However, the deposition of drugs in the lungs can be limited by lung defence mechanisms such as mucociliary and macrophages' clearance. Among the delivery devices, dry powder inhalers represent the optimal choice due to their stability, ease of use, and absence of propellants. In the last decades, several bottom-up techniques have emerged over traditional milling to produce inhalable powders. Among these techniques, the most employed ones are spray drying, supercritical fluid technology, spray freeze-drying, and thin film freezing. Inhalable dry powders can be constituted by micronized drugs attached to a coarse carrier (e.g., lactose) or drugs embedded into a micro- or nanoparticle. Particulate-based formulations are commonly composed of polymeric micro- and nanoparticles, liposomes, solid lipid nanoparticles, dendrimers, nanocrystals, extracellular vesicles, and inorganic nanoparticles. Moreover, engineered formulations including large porous particles, swellable microparticles, nano-in-microparticles, and effervescent nanoparticles have been developed. Particle engineering has also a crucial role in tuning the physical-chemical properties of both carrier-based and carrier-free inhalable powders. This approach can increase powder flowability, deposition, and targeting by customising particle surface features.

Design of Experiment (DoE) Approach for Developing Inhalable PLGA Microparticles Loaded with Clofazimine for Tuberculosis Treatment

Tuberculosis (TB) is an airborne bacterial infection caused by Mycobacterium tuberculosis (M. tb), resulting in approximately 1.3 million deaths in 2022 worldwide. Oral therapy with anti-TB drugs often fails to achieve therapeutic concentrations at the primary infection site (lungs). In this study, we developed a dry powder inhalable formulation (DPI) of clofazimine (CFZ) to provide localized drug delivery and minimize systemic adverse effects. Poly (lactic acid-co-glycolic acid) (PLGA) microparticles (MPs) containing CFZ were developed through a single emulsion solvent evaporation technique. Clofazimine microparticles (CFZ MPs) displayed entrapment efficiency and drug loading of 66.40 ± 2.22 %w/w and 33.06 ± 1.45 µg/mg, respectively. To facilitate pulmonary administration, MPs suspension was spray-dried to yield a dry powder formulation (CFZ SD MPs). Spray drying had no influence on particle size (~1 µm), zeta potential (-31.42 mV), and entrapment efficiency. Solid state analysis (PXRD and DSC) of CFZ SD MPs studies demonstrated encapsulation of the drug in the polymer. The drug release studies showed a sustained drug release. The optimized formulation exhibited excellent aerosolization properties, suggesting effective deposition in the deeper lung region. The in vitro antibacterial studies against H37Ra revealed improved (eight-fold) efficacy of spray-dried formulation in comparison to free drug. Hence, clofazimine dry powder formulation presents immense potential for the treatment of tuberculosis with localized pulmonary delivery and improved patient compliance.

Modern trends in the formulation of microparticles for lung delivery using porogens: methods, principles and examples

Inhalation drug administration is increasingly used for local pharmacotherapy of lung disorders and as an alternative route for systemic drug delivery. Modern inhalation powder systems aim to target drug deposition in the required site of action. Large porous particles (LPP), characterized by an aerodynamic diameter over 5 μm, density below 0.4 g/cm3, and the ability to avoid protective lung mechanisms, come to the forefront of the research. They are mostly prepared by spray techniques such as spray drying or lyophilization using pore-forming substances (porogens). These substances could be gaseous, solid, or liquid, and their selection depends on their polarity, solubility, and mutual compatibility with the carrier material and the drug. According to the pores-forming mechanism, porogens can be divided into groups, such as osmogens, extractable porogens, and porogens developing gases during decomposition. This review characterizes modern trends in the formulation of solid microparticles for lung delivery; describes the mechanisms of action of the most often used porogens, discusses their applicability in various formulation methods, emphasizes spray techniques; and documents discussed topics by examples from experimental studies.

Applications and advancements of nanoparticle-based drug delivery in alleviating lung cancer and chronic obstructive pulmonary disease

Lung cancer (LC) and chronic obstructive pulmonary disease (COPD) are among the leading causes of mortality worldwide. Cigarette smoking is among the main aetiologic factors for both ailments. These diseases share common pathogenetic mechanisms including inflammation, oxidative stress, and tissue remodelling. Current therapeutic approaches are limited by low efficacy and adverse effects. Consequentially, LC has a 5-year survival of < 20%, while COPD is incurable, underlining the necessity for innovative treatment strategies. Two promising emerging classes of therapy against these diseases include plant-derived molecules (phytoceuticals) and nucleic acid-based therapies. The clinical application of both is limited by issues including poor solubility, poor permeability, and, in the case of nucleic acids, susceptibility to enzymatic degradation, large size, and electrostatic charge density. Nanoparticle-based advanced drug delivery systems are currently being explored as flexible systems allowing to overcome these limitations. In this review, an updated summary of the most recent studies using nanoparticle-based advanced drug delivery systems to improve the delivery of nucleic acids and phytoceuticals for the treatment of LC and COPD is provided. This review highlights the enormous relevance of these delivery systems as tools that are set to facilitate the clinical application of novel categories of therapeutics with poor pharmacokinetic properties.

The application of nanoparticles as advanced drug delivery systems in Attenuating COPD

Chronic Obstructive Pulmonary Disease (COPD) is a dilapidating condition which is characterized by inflammation, an excess in free radical generation and airway obstruction. Currently, the drugs commercially available for the management of COPD pose several limitations such as systemic adverse effects, including bone density loss and an increased risk of developing pneumonia. Moreover, another limitation includes the need for regular and frequent dosing regimens; which can affect the adherence to the therapy. Furthermore, these current treatments provide symptomatic relief; however, they cannot stop the progression of COPD. Comparatively, nanoparticles (NPs) provide great therapeutic potential to treat COPD due to their high specificity, biocompatibility, and higher bioavailability. Furthermore, the NP-based drug delivery systems involve less frequent dosing requirements and in smaller doses which assist in minimizing side effects. In this review, the benefits and limitations of conventional therapies are explored, while providing an in-depth insight on advanced applications of NP-based systems in the treatment of COPD.

Development of a new inhaled swellable microsphere system for the dual delivery of naringenin-loaded solid lipid nanoparticles and doxofylline for the treatment of asthma

This study developed a new dual delivery system of naringenin (NRG), a polyphenol, and doxofylline (DOX), a xanthine derivative, as an inhaled microsphere system. In this system, NRG has been first loaded into glyceryl tristearate-based solid lipid nanoparticles (NRG SLN), which were further loaded with DOX into swellable chitosan-tripolyphosphate-based microspheres (NRG SLN DOX sMS). The system was characterized based on particle size, PDI, zeta potential, surface morphology (SEM, AFM, and TEM), solid-state and chemical properties (XRD, IR, and NMR), aerodynamic parameters, drug loading, entrapment efficiency and in vitro drug release study. The optimized NRG SLN DOX sMS exhibited particle size, zeta potential, and PDI of 2.1 µm, 31.2 mV, and 0.310, respectively; a drug entrapment efficiency > 79 %; a drug loading efficiency > 13 %; cumulative drug releases of about 78 % for DOX and 72 % for NRG after 6 and 12 h, respectively; good swelling and desirable aerodynamic properties. In addition, in vivo studies conducted in mice, a murine model of asthma showed significant reductions in serum bicarbonate and eosinophil counts and improvement in respiratory flow rate, tidal volume, and bronchial wall lining compared with the asthmatic control group. Overall, this novel inhalable dual-delivery system may represent a good alternative for the effective treatment of asthma.

Preparation of Budesonide-Loaded Liposomal Nanoparticles for Pulmonary Delivery and Their Therapeutic Effect in OVA-Induced Asthma in Mice

Purpose

Inhaled corticosteroids, including budesonide (BUD), are widely employed for the treatment of asthma. However, the frequent use of corticosteroids is associated with numerous adverse effects and poses challenges to ongoing drug therapy and patient adherence. Budesonide liposomal nanoparticles (BUD-LNPs) were developed to improve the bioavailability of the drug and thereby improve the effectiveness of asthma treatment.

Methods

BUD-LNPs were prepared via thin-film hydration, and the characterizations, stability, and in vitro release of BUD-LNPs were studied. In vitro cellular uptake was observed by laser-scanning confocal microscope (LSCM) and flow cytometry. And the in vitro anti-inflammatory activity of BUD-LNPs was evaluated by measuring the expression of pro-inflammatory cytokines in activated macrophages. Besides, the accumulation time in the lung of drugs delivered via liposomal carriers and free drugs was compared in vivo. And the in vivo therapeutic efficacy of BUD-LNPs was assessed in OVA-induced asthmatic mice. Finally, in vivo biosafety assessment was performed.

Results

The particle size, PDI, and zeta potential of BUD-LNPs were 127.63±1.33 nm, 0.27±0.02, and 3.33±0.13 mV, respectively. BUD-LNPs exhibited excellent biosafety and anti-inflammatory activity in vitro. Furthermore, compared with the free drugs, the utilization of liposomal nano-vehicles for drugs delivery could effectively extend the duration of drugs accumulation in the pulmonary system. Additionally, treatment with BUD-LNPs alleviated airway hyperresponsiveness, reduced airway mucus secretion, and mitigated pulmonary inflammation in OVA-induced asthmatic mice. And the BUD-LNPs demonstrated superior therapeutic efficacy compared to free BUD.

Conclusion

BUD-LNPs was successfully prepared with excellent stability and sustained release for 24 h in vitro. The data of anti-inflammatory activity, asthma therapeutic effects and safety studies indicated that drug delivery mediated by liposomal nano-vehicles was a feasible and desirable strategy for medical strategy and showed great promise in the clinical therapy of asthma.

Surface-Modified Inhaled Microparticle-Encapsulated Celastrol for Enhanced Efficacy in Malignant Pleural Mesothelioma

Malignant pleural mesothelioma (MPM) is a rare and aggressive cancer affecting the pleural lining of the lungs. Celastrol (Cela), a pentacyclic triterpenoid, has demonstrated promising therapeutic potential as an antioxidant, anti-inflammatory, neuroprotective agent, and anti-cancer agent. In this study, we developed inhaled surface-modified Cela-loaded poly(lactic-co-glycolic) acid (PLGA) microparticles (Cela MPs) for the treatment of MPM using a double emulsion solvent evaporation method. The optimized Cela MPs exhibited high entrapment efficiency (72.8 ± 6.1%) and possessed a wrinkled surface with a mean geometric diameter of ~2 µm and an aerodynamic diameter of 4.5 ± 0.1 µm, suggesting them to be suitable for pulmonary delivery. A subsequent release study showed an initial burst release up to 59.9 ± 2.9%, followed by sustained release. The therapeutic efficacy of Cela MPs was evaluated against four mesothelioma cell lines, where Cela MP exhibited significant reduction in IC50 values, and blank MPs produced no toxicity to normal cells. Additionally, a 3D-spheroid study was performed where a single dose of Cela MP at 1.0 µM significantly inhibited spheroid growth. Cela MP was also able to retain the antioxidant activity of Cela only while mechanistic studies revealed triggered autophagy and an induction of apoptosis. Therefore, these studies highlight the anti-mesothelioma activity of Cela and demonstrate that Cela MPs are a promising inhalable medicine for MPM treatment.

PLGA-Based Micro/Nanoparticles: An Overview of Their Applications in Respiratory Diseases

Respiratory diseases, such as asthma and chronic obstructive pulmonary disease (COPD), are critical areas of medical research, as millions of people are affected worldwide. In fact, more than 9 million deaths worldwide were associated with respiratory diseases in 2016, equivalent to 15% of global deaths, and the prevalence is increasing every year as the population ages. Due to inadequate treatment options, the treatments for many respiratory diseases are limited to relieving symptoms rather than curing the disease. Therefore, new therapeutic strategies for respiratory diseases are urgently needed. Poly (lactic-co-glycolic acid) micro/nanoparticles (PLGA M/NPs) have good biocompatibility, biodegradability and unique physical and chemical properties, making them one of the most popular and effective drug delivery polymers. In this review, we summarized the synthesis and modification methods of PLGA M/NPs and their applications in the treatment of respiratory diseases (asthma, COPD, cystic fibrosis (CF), etc.) and also discussed the research progress and current research status of PLGA M/NPs in respiratory diseases. It was concluded that PLGA M/NPs are the promising drug delivery vehicles for the treatment of respiratory diseases due to their advantages of low toxicity, high bioavailability, high drug loading capacity, plasticity and modifiability. And at the end, we presented an outlook on future research directions, aiming to provide some new ideas for future research directions and hopefully to promote their widespread application in clinical treatment.

Application of PLGA as a Biodegradable and Biocompatible Polymer for Pulmonary Delivery of Drugs

Pulmonary administration of biodegradable polymeric formulation is beneficial in the treatment of various respiratory diseases. For respiratory delivery, the polymer must be non-toxic, biodegradable, biocompatible, and stable. Poly D, L-lactic-co-glycolic acid (PLGA) is a widely used polymer for inhalable formulations because of its attractive mechanical and processing characteristics which give great opportunities to pharmaceutical industries to formulate novel inhalable products. PLGA has many pharmaceutical applications and its biocompatible nature produces non-toxic degradation products. The degradation of PLGA takes place through the non-enzymatic hydrolytic breakdown of ester bonds to produce free lactic acid and glycolic acid. The biodegradation products of PLGA are eliminated in the form of carbon dioxide (CO₂) and water (H₂O) by the Krebs cycle. The biocompatible properties of PLGA are investigated in various in vivo and in vitro studies. The high structural integrity of PLGA particles provides better stability, excellent drug loading, and sustained drug release. This review provides detailed information about PLGA as an inhalable grade polymer, its synthesis, advantages, physicochemical properties, biodegradability, and biocompatible characteristics. The important formulation aspects that must be considered during the manufacturing of inhalable PLGA formulations and the toxicity of PLGA in the lungs are also discussed in this paper. Additionally, a thorough overview is given on the application of PLGA as a particulate carrier in the treatment of major respiratory diseases, such as cystic fibrosis, lung cancer, tuberculosis, asthma, and pulmonary hypertension.

Recent Advances in Nanomaterials for Asthma Treatment

Asthma is a chronic airway inflammatory disease with complex mechanisms, and these patients often encounter difficulties in their treatment course due to the heterogeneity of the disease. Currently, clinical treatments for asthma are mainly based on glucocorticoid-based combination drug therapy; however, glucocorticoid resistance and multiple side effects, as well as the occurrence of poor drug delivery, require the development of more promising treatments. Nanotechnology is an emerging technology that has been extensively researched in the medical field. Several studies have shown that drug delivery systems could significantly improve the targeting, reduce toxicity and improve the bioavailability of drugs. The use of multiple nanoparticle delivery strategies could improve the therapeutic efficacy of drugs compared to traditional delivery methods. Herein, the authors presented the mechanisms of asthma development and current therapeutic methods. Furthermore, the design and synthesis of different types of nanomaterials and micromaterials for asthma therapy are reviewed, including polymetric nanomaterials, solid lipid nanomaterials, cell membranes-based nanomaterials, and metal nanomaterials. Finally, the challenges and future perspectives of these nanomaterials are discussed to provide guidance for further research directions and hopefully promote the clinical application of nanotherapeutics in asthma treatment.

Biodegradable and Inherently Fluorescent pH-Responsive Nanoparticles for Cancer Drug Delivery

PURPOSE

The development of two novel pH-only and pH- and thermo-responsive theranostic nanoparticle (NP) formulations to deliver an anticancer drug and track the accumulation and therapeutic efficacy of the formulations through inherent fluorescence.

METHODS

A pH-responsive formulation was synthesized from biodegradable photoluminescent polymer (BPLP) and sodium bicarbonate (SBC) via an emulsion technique, while a thermoresponsive BPLP copolymer (TFP) and SBC were used to synthesize a dual-stimuli responsive formulation via free radical co-polymerization. Cisplatin was employed as a model drug and encapsulated during synthesis. Size, surface charge, morphology, pH-dependent fluorescence, lower critical solution temperature (LCST; TFP NPs only), cytocompatibility and in vitro uptake, drug release kinetics and anticancer efficacy were assessed.

RESULTS

While all BPLP-SBC and TFP-SBC combinations produced spherical nanoparticles of a size between 200-300 nm, optimal polymer-SBC ratios were selected for further study. Of these, the optimal BPLP-SBC formulation was found to be cytocompatible against primary Type-1 alveolar epithelial cells (AT1) up to 100 μg/mL, and demonstrated sustained drug release over 14 days, dose-dependent uptake, and marked pH-dependent A549 cancer cell killing (72 vs. 24% cell viability, at pH 7.4 vs. 6.0). The optimal TFP-SBC formulation showed excellent cytocompatibility against AT1 cells up to 500 μg/mL, sustained release characteristics, dose-dependent uptake, pH-dependent (78% at pH 7.4 vs. 64% at pH 6.0 at 37°C) and marked temperature-dependent A549 cancer cell killing (64% at 37°C vs. 37% viability at pH 6.0, 41°C).

CONCLUSIONS

In all, both formulations hold promise as inherently fluorescent, stimuli-responsive theranostic platforms for passively targeted anti-cancer therapy.

Formulation and Evaluation of Novel Additive-Free Spray-Dried Triamcinolone Acetonide Microspheres for Pulmonary Delivery: A Pharmacokinetic Study

This work aimed to establish a simple method to produce additive-free triamcinolone acetonide (TAA) microspheres suitable for pulmonary delivery, and therefore more simple manufacturing steps will be warranted. The spray-drying process involved the optimization of the TAA feed ratio in a concentration range of 1-3% w/v from different ethanol/water compositions with/without adding ammonium bicarbonate as a blowing agent. Characterization of the formulas was performed via scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction. Our results indicated that the size and morphology of spray-dried TAA particles were dependent on the feed and solvent concentrations in the spray-dried formulations. Furthermore, adding the blowing agent, ammonium bicarbonate, did not produce a significant enhancement in particle characteristics. We prepared additive-free TAA microspheres and found that TAA formulation #1 had optimal physical properties in terms of diameter (2.24 ± 0.27 µm), bulk density (0.95 ± 0.05), tapped density (1.18 ± 0.07), and flowability for deposition during the pulmonary tract, from a centric airway to the alveoli as indicated by Carr's index = 19 ± 0.01. Hence, formulation #1 was selected to be tested for pharmacokinetic characters. Rats received pulmonary doses of TAA formula #1 and then the TTA concentration in plasma, fluid broncho-alveolar lavage, and lung tissues was determined by HPLC. The TAA concentration at 15 min was 0.55 ± 0.02 µg/mL in plasma, 16.74 ± 2 µg/mL in bronchoalveolar lavage, and 8.96 ± 0.65 µg/mL in lung homogenates, while at the 24 h time point, the TAA concentration was 0.03 ± 0.02 µg/mL in plasma, 1.48 ± 0.27 µg/mL in bronchoalveolar lavage, and 3.79 ± 0.33 µg/mL in lung homogenates. We found that TAA remained in curative concentrations in the rat lung tissues for at least 24 h after pulmonary administration. Therefore, we can conclude that additive-free spray-dried TAA microspheres were promising for treating lung diseases. The current novel preparation technology has applications in the design of preparations for TAA or other therapeutic agents designed for pulmonary delivery.

Design, Synthesis, and Evaluation of Lung-Retentive Prodrugs for Extending the Lung Tissue Retention of Inhaled Drugs

A major limitation of pulmonary delivery is that drugs can exhibit suboptimal pharmacokinetic profiles resulting from rapid elimination from the pulmonary tissue. This can lead to systemic side effects and a short duration of action. A series of dibasic dipeptides attached to the poorly lung-retentive muscarinic M3 receptor antagonist piperidin-4-yl 2-hydroxy-2,2-diphenylacetate (1) through a pH-sensitive-linking group have been evaluated. Extensive optimization resulted in 1-(((R)-2-((S)-2,6-diaminohexanamido)-3,3-dimethylbutanoyl)oxy)ethyl 4-(2-hydroxy-2,2-diphenylacetoxy)piperidine-1-carboxylate (23), which combined very good in vitro stability and very high rat lung binding. Compound 23 progressed to pharmacokinetic studies in rats, where, at 24 h post dosing in the rat lung, the total lung concentration of 23 was 31.2 μM. In addition, high levels of liberated drug 1 were still detected locally, demonstrating the benefit of this novel prodrug approach for increasing the apparent pharmacokinetic half-life of drugs in the lungs following pulmonary dosing.

In vitro drug release and antibacterial activity evaluation of silk fibroin coated vancomycin hydrochloride loaded poly (lactic-co-glycolic acid) (PLGA) sustained release microspheres

Currently, the treatment of osteomyelitis poses a great challenge to clinical orthopedics. The use of biodegradable materials combined with antibiotics provides a completely new option for the treatment of osteomyelitis. In this study, vancomycin hydrochloride (VANCO) loaded poly (lactic-co-glycolic acid) (PLGA) microspheres were prepared by a double emulsion solvent evaporation method, and the in vitro drug release behaviors of the drug loaded microspheres were explored after coating with different concentrations of silk fibroin (SF). Drug loading, encapsulation efficiency, Scanning electron microscopy, particle size analysis, Fourier transform infrared spectroscopy, hydrophilicity, in vitro drug release, and in vitro antibacterial activity were evaluated. The results showed that the drug loading of vancomycin loaded PLGA microspheres was (24.11 ±1.72)%, and the encapsulation efficiency was (48.21 ±3.44)%. The in vitro drug release indicated that the drug loaded microspheres showed an obvious initial burst release, and the drug loaded microspheres coated with SF could alleviate the initial burst release in varying degrees. It also can reduce the amount of cumulative drug release, and the effect of microspheres coated with 0.1% concentration of SF is the best. The time of in vitro drug release in different groups of drug loaded microspheres can be up to 28 days. The microspheres coated with (0.1%SF) or without (0%SF) SF showed a cumulative release of (82.50±3.51)% and (67.70±3.81)%,respectively. Therefore, the surface coating with SF of vancomycin loaded microspheres can alleviate the initial burst release, reduce the cumulative drug release, potentially prolong the drug action time, and improve the anti-infection effect.

Chitosan-centered nanosystems as sustained therapeutics for allergic rhinitis intervention: Inhibition of histamine-induced cascades

Allergic rhinitis (AR), histamine-mediated upper airway inflammatory disorder, is characterized by sneezing, itching, airway hyperreactivity, etc. Though it is clinically well-managed by non-invasive inhaled antihistamines, for example, ketotifen (KT, histamine release inhibitor) and cetirizine (CTZ, histamine receptor antagonist), inherent defects of short mucosal in situ retention, frequent administration resulting in irritation to mucosa, and lack of target-specific sequential release of dual drug systems which have been proven to be more effective are inevitable, urging for alternative therapeutic strategies. Recent advances in nanotechnology may be pivotal to generating muco-adhesive nanosystems, which is desirable to prolong local retention, reduce dosing frequency and relieve mucosal irritation. In this regard, KT incorporated and CTZ decorated hydroxybutyl chitosan nanoparticles (K ⊂ CH NPs) were fabricated as nasal adaptive sequential release dual drug system for long-term AR therapy. Nasal adaptive morphology transformation and two-step payload release up to 72 h were achieved in vitro, with ~ 3-fold higher bio-adhesivity over free drugs appeared. K ⊂ CH NPs accomplished longer histamine release inhibition (~ 24 h) and histamine H₁ receptor antagonism (~ 6 h), compared with free KT&CTZ of ~ 12 h and ~ 2 h, respectively. The nanosystems provided comparable anti-allergic effect to free antihistamines via successive intranasal dropping in AR rat, while encouragingly, significantly (P < 0.05) better therapeutic efficacy at reduced treatment frequency (every 4 days) and dose (half-dose). Therefore, the outcomes establish K ⊂ CH NPs as effective low-dose and long-interval administered nanosystems to ameliorate histamine-mediated AR inflammation, which could in principal find extensive utilizations in respiratory allergy intervention.

Nanosystems as curative platforms for allergic disorder management

Allergy, IgE-mediated inflammatory disorders including allergic rhinitis, asthma, and conjunctivitis, affects billions of people worldwide. Conventional means of allergy management include allergen avoidance, pharmacotherapy, and emerging therapies. Among them, chemotherapeutant intake via oral, intravenous, and intranasal routes is always the most common mean. Although current pharmacotherapy exhibit splendid anti-allergic effects, short in situ retention, low bioavailability, and systemic side effects are inevitable. Nowadays, nanoplatforms have provided alternative therapeutic options to obviate the existing weakness via enhancing the solubility of hydrophobic therapeutic agents, achieving in situ drug accumulation, exhibiting controlled and long-time drug release at lesion areas, and providing multi-functional therapeutic strategies. Herein, we highlight the clinical therapeutic strategies and deal with characteristics of the nanoplatform design in allergy interventions via intratracheal, gastrointestinal, intravenous, and ocular paths. The promising therapeutic utilization in a variety of allergic disorders is discussed, and recent perspectives on the feasible advances of nanoplatforms in allergy management are also exploited.

Controlled Pulmonary Delivery of Carrier-Free Budesonide Dry Powder by Atomic Layer Deposition

Ideal controlled pulmonary drug delivery systems provide sustained release by retarding lung clearance mechanisms and efficient lung deposition to maintain therapeutic concentrations over prolonged time. Here, we use atomic layer deposition (ALD) to simultaneously tailor the release and aerosolization properties of inhaled drug particles without the need for lactose carrier. In particular, we deposit uniform nanoscale oxide ceramic films, such as Al2O3, TiO2, and SiO2, on micronized budesonide particles, a common active pharmaceutical ingredient for the treatment of respiratory diseases. In vitro dissolution and ex vivo isolated perfused rat lung tests demonstrate dramatically slowed release with increasing nanofilm thickness, regardless of the nature of the material. Ex situ transmission electron microscopy at various stages during dissolution unravels mostly intact nanofilms, suggesting that the release mechanism mainly involves the transport of dissolution media through the ALD films. Furthermore, in vitro aerosolization testing by fast screening impactor shows a ∼2-fold increase in fine particle fraction (FPF) for each ALD-coated budesonide formulation after 10 ALD process cycles, also applying very low patient inspiratory pressures. The higher FPFs after the ALD process are attributed to the reduction in the interparticle force arising from the ceramic surfaces, as evidenced by atomic force microscopy measurements. Finally, cell viability, cytokine release, and tissue morphology analyses verify a safe and efficacious use of ALD-coated budesonide particles at the cellular level. Therefore, surface nanoengineering by ALD is highly promising in providing the next generation of inhaled formulations with tailored characteristics of drug release and lung deposition, thereby enhancing controlled pulmonary delivery opportunities.

A quantitative approach to predicting lung deposition profiles of pharmaceutical powder aerosols

Dry powder inhalers (DPI) are widely used systems for pulmonary delivery of therapeutics. The inhalation performance of DPIs is influenced by formulation features, inhaler device and inhalation pattern. The current review presents the affecting factors with great focus on powder characteristics which include particle size, shape, surface, density, hygroscopicity and crystallinity. The properties of a formulation are greatly influenced by a number of physicochemical factors of drug and added excipients. Since available particle engineering techniques result in particles with a set of modifications, it is difficult to distinguish the effect of an individual feature on powder deposition behavior. This necessitates developing a predictive model capable of describing all influential factors on dry powder inhaler delivery. Therefore, in the current study, a model was constructed to correlate the inhaler device properties, inhalation flow rate, particle characteristics and drug/excipient physicochemical properties with the resultant fine particle fraction. The r² value of established correlation was 0.74 indicating 86% variability in FPF values is explained by the model with the mean absolute errors of 0.22 for the predicted values. The authors believe that this model is capable of predicting the lung deposition pattern of a formulation with an acceptable precision when the type of inhaler device, inhalation flow rate, physicochemical behavior of active and inactive ingredients and the particle characteristics of DPI formulations are considered.

Co-delivery of inhalable therapies: Controlling active ingredients spatial distribution and temporal release

The management of respiratory diseases relies on the daily administration of multiple active pharmaceutical ingredients (APIs), leading to a lack of patient compliance and impaired quality of life. The frequency and dosage of the APIs result in increased side effects that further worsens the overall patient condition. Here, the manufacture of polymer-polymer core-shell microparticles for the sequential delivery of multiple APIs by inhalation delivery is reported. The microparticles, composed of biodegradable polymers silk fibroin (shell) and poly(L-lactic acid) (core), incorporating ciprofloxacin in the silk layer and ibuprofen (PLLA core) as the antibiotic and anti-inflammatory model APIs, respectively. The polymer-polymer core-shell structure and the spatial distribution of the APIs have been characterized using cutting-edge synchrotron macro ATR-FTIR technique, which was correlated with the respective API sequential release profiles. The APIs microparticles had a suitable size and aerosol properties for inhalation therapies (≤4.94 ± 0.21μm), with low cytotoxicity and immunogenicity in healthy lung epithelial cells. The APIs compartmentalization obtained by the microparticles not only could inhibit potential actives interactions but can provide modulation of the APIs release profiles via an inhalable single administration.

Recent advances in the formulation of PLGA microparticles for controlled drug delivery

Polymeric microparticles (MPs) are recognized as very popular carriers to increase the bioavailability and bio-distribution of both lipophilic and hydrophilic drugs. Among different kinds of polymers, poly-(lactic-co-glycolic acid) (PLGA) is one of the most accepted materials for this purpose, because of its biodegradability (due to the presence of ester linkages that are degraded by hydrolysis in aqueous environments) and safety (PLGA is a Food and Drug Administration (FDA)-approved compound). Moreover, its biodegradability depends on the number of glycolide units present in the structure, indeed, lower glycol content results in an increased degradation time and conversely a higher monomer unit number results in a decreased time. Due to this feature, it is possible to design and fabricate MPs with a programmable and time-controlled drug release. Many approaches and procedures can be used to prepare MPs. The chosen fabrication methodology influences size, stability, entrapment efficiency, and MPs release kinetics. For example, lipophilic drugs as chemotherapeutic agents (doxorubicin), anti-inflammatory non-steroidal (indomethacin), and nutraceuticals (curcumin) were successfully encapsulated in MPs prepared by single emulsion technique, while water-soluble compounds, such as aptamer, peptides and proteins, involved the use of double emulsion systems to provide a hydrophilic compartment and prevent molecular degradation. The purpose of this review is to provide an overview about the preparation and characterization of drug-loaded PLGA MPs obtained by single, double emulsion and microfluidic techniques, and their current applications in the pharmaceutical industry.Graphic abstract.

Inhalation of sustained release microparticles for the targeted treatment of respiratory diseases

Delivering drugs through inhalation for systemic and local applications has been in practice since several decades to treat various diseases. In recent times, inhalation drug delivery is becoming one of the highly focused areas of research in the pharmaceutical industry. It is being considered as one of the major portals for delivering drugs because of its wide range of advantages like requirement of low concentrations of drug to reach therapeutic efficacy, surpassing first pass metabolism and a very low incidence of side effects as compared to conventional delivery of drugs. Owing to these favorable characteristics of pulmonary drug delivery, diverse pharmaceutical formulations like liposomes, nanoparticles, and microparticles are developed through consistent efforts for delivery drugs to lungs in suitable form. However, drug-loaded microparticles have displayed various advantages over the other pharmaceutical dosage forms which give a cutting edge over other inhalational drug delivery systems. Assuring results with respect to sustained release through inhalational delivery of drug-loaded microparticles from pre-clinical studies are anticipative of similar benefits in the clinical settings. This review centralizes partly on the advantages of inhalational microparticles over other inhalational dosage forms and largely on the therapeutic applications and future perspectives of inhalable microparticle drug delivery systems.

Engineering large porous microparticles with tailored porosity and sustained drug release behavior for inhalation

Sustained drug delivery is considered as an effective strategy to improve the treatment of local lung diseases. In this context, inhalation administration of large porous microparticles (LPPs) represents promising prospects. However, one major challenge with said delivery technology is to control the drug release pattern (especially to decrease the burst release) while maintaining a low mass density/high porosity, which is of high significance for the aerodynamic behavior of LPP systems. Here, we show how to engineer drug-loaded, biodegradable LPPs with varying microstructure by means of a premix membrane emulsification-solvent evaporation (PME-SE) method using poly(vinyl pyrrolidone) (PVP) as the pore former. The influence of PVP concentration on the physicochemical properties, in-vitro drug release behavior and in-vitro aerodynamic performance of the drug-loaded microparticles was tested. We demonstrated that the PME-SE technique led to LPPs with favorable pore distribution characteristics (i.e., low external but high internal porosity) as a function of the PVP concentration. In general, more PVP conditioned a larger discrepancy of the internal vs. external porosity. When the external porosity of the LPP formulation (15% of PVP during the manufacturing process) was less than 3%, the burst release of the embedded drug was significantly reduced compared to LPPs prepared by a "conventional" emulsification solvent evaporation method. All the formulations prepared by the PME-SE method had aerodynamic properties suitable for inhalation. This is the first report indicating that the microstructure of LPPs can be tailored using the PME-SE technology with PVP as a suitable pore former. Doing so, we designed LPP formulations having full control over the drug release kinetics and aerodynamic behavior.

Conventional and Nanotechnology Based Approaches to Combat Chronic Obstructive Pulmonary Disease: Implications for Chronic Airway Diseases

Chronic obstructive pulmonary disease (COPD) is the most prevalent obstructive lung disease worldwide characterized by decline in lung function. It is associated with airway obstruction, oxidative stress, chronic inflammation, mucus hypersecretion, and enhanced autophagy and cellular senescence. Cigarette smoke being the major risk factor, other secondary risk factors such as the exposure to air pollutants, occupational exposure to gases and fumes in developing countries, also contribute to the pathogenesis of COPD. Conventional therapeutic strategies of COPD are based on anti-oxidant and anti-inflammatory drugs. However, traditional anti-oxidant pharmacological therapies are commonly used to alleviate the impact of COPD as they have many associated repercussions such as low diffusion rate and inappropriate drug pharmacokinetics. Recent advances in nanotechnology and stem cell research have shed new light on the current treatment of chronic airway disease. This review is focused on some of the anti-oxidant therapies currently used in the treatment and management of COPD with more emphasis on the recent advances in nanotechnology-based therapeutics including stem cell and gene therapy approaches for the treatment of chronic airway disease such as COPD and asthma.

Exploring Trehalose on the Release of Levonorgestrel from Implantable PLGA Microneedles

Hydrophobic drugs wrapped in poly (lactic-co-glycolic acid) (PLGA)-based microneedles (MNs) require a long time to release completely. To obtain the desired duration, it is still necessary to modulate the release of hydrophobic drugs from MNs, while the PLGA composition is unchangeable. In this work, implantable PLGA microneedles (IPMNs) composed of PLGA arrowheads encapsulating levonorgestrel (LNG) and a water-soluble supporting array were designed. We explored trehalose used as a porogen on the release of hydrophobic LNG from PLGA-based MNs. Varying the trehalose content in PLGA arrowheads could induce different rates of drug release. The highest cumulative release of LNG was 76.2 ± 3.9% for IPMNs with 33.3% trehalose during 21 days in vitro, while the cumulative release of LNG was 60.4 ± 3.5% for IPMNs without trehalose. Pharmacokinetic results in rats showed that plasma levels of LNG were sustained for 13 days for IPMNs with 33.3% trehalose and 16 days for IPMNs without trehalose. Furthermore, the PLGA arrowheads with trehalose degraded more rapidly than those without trehalose over 21 days in rats. Consequently, using trehalose as a porogen was a feasible approach to modulate the release of a hydrophobic drug from PLGA-based MNs.

PLGA Porous Microspheres Dry Powders for Codelivery of Afatinib-Loaded Solid Lipid Nanoparticles and Paclitaxel: Novel Therapy for EGFR Tyrosine Kinase Inhibitors Resistant Nonsmall Cell Lung Cancer

Combination therapy of epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors (EGFR TKIs) with other chemotherapeutic agents is a feasible strategy to overcome resistance that often occurs after 9-13 months of EGFR TKIs administration in nonsmall cell lung cancer (NSCLC). In this study, a pulmonary microspheres system that codelivers afatinib and paclitaxel (PTX) is developed for treatment of EGFR TKIs resistant NSCLC. In this system, afatinib is loaded in stearic acid-based solid lipid nanoparticles, then these nanoparticles and PTX are loaded in poly-lactide-co-glycolide-based porous microspheres. These inhaled microspheres systems are characterized including geometric particle size, drug encapsulation efficiency, morphology by scanning electron microscopy, specific surface area, in vitro drug release, and aerodynamic particle size. Cell experiments indicate that afatinib and PTX have a synergistic effect and the codelivery system shows a superior treatment effect in drug-resistant NSCLC cells. The biocompatibility, pharmacokinetic, and tissue distribution experiments in Sprague-Dawley rats show that afatinib and PTX in the system can maintain 96 h of high lung concentration but low concentration in other tissues, with acceptable safety. These results demonstrate that this system may be a prospective delivery strategy for drug combination treatment in cancers developing resistance, especially drug-resistant lung cancer.

Rational particle design to overcome pulmonary barriers for obstructive lung diseases therapy

Pulmonary delivery of active drugs has been applied for the treatment of obstructive lung diseases, including asthma, chronic obstructive pulmonary disease and cystic fibrosis, for several decades and has achieved progress in symptom management by bronchodilator inhalation. However, substantial progress in anti-inflammation, prevention of airway remodeling and disease progression is limited, since the majority of the formulation strategies focus only on particle deposition, which is insufficient for pulmonary delivery of the drugs. The lack of knowledge on lung absorption barriers in obstructive lung diseases and on pathogenesis impedes the development of functional formulations by rational design. In this review, we describe the physiological structure and biological functions of the barriers in various regions of the lung, review the pathogenesis and functional changes of barriers in obstructive lung diseases, and examine the interaction of these barriers with particles to influence drug delivery efficiency. Subsequently, we review rational particle design for overcoming lung barriers based on excipients selection, particle size and surface properties, release properties and targeting ability. Additionally, useful particle fabrication strategies and commonly used drug carriers for pulmonary delivery in obstructive lung diseases are proposed in this article.

Biodegradable micro-sized discoidal polymeric particles for lung-targeted delivery system

Various types of particle-based drug delivery systems have been explored for the treatment of pulmonary diseases; however, bio-distribution and elimination of the particles should be monitored for better understanding of their therapeutic efficacy and safety. This study aimed to characterize the biological properties of micro-sized discoidal polymeric particles (DPPs) as lung-targeted drug delivery carriers. DPPs were prepared using a top-down fabrication approach and characterized by assessing size and zeta potential. They were labeled with zirconium-89 (⁸⁹Zr), and bio-distribution studies and PET imaging were performed for 7 days after intravenous administration. Their hydrodynamic size was 2.8 ± 6.1 μm and average zeta potential was -39.9 ± 5.39 mV. At doses of 5, 12.5, and 25 mg/kg, they showed no acute toxicity in nude mice. Desferrioxamine (DFO)-functionalized ⁸⁹Zr-labeled DPPs gave a decay-corrected radiochemical yield of 82.1 ± 0.2%. Furthermore, ⁸⁹Zr-DPPs, from chelate-free labeling methods, showed a yield of 48.5 ± 0.9%. Bio-distribution studies and PET imaging showed ⁸⁹Zr-DFO-DPPs to be mainly accumulated in the lungs and degraded within 3 d of injection. However, ⁸⁹Zr-DFO-DPPs showed significantly low uptake in the bone. Overall, our results suggested micro-sized DPPs as promising drug delivery carriers for the targeted treatment of various pulmonary diseases.

New injectable two-step forming hydrogel for delivery of bioactive substances in tissue regeneration

A hydrogel based on chitosan, collagen, hydroxypropyl-γ-cyclodextrin and polyethylene glycol was developed and characterized. The incorporation of nano-hydroxyapatite and pre-encapsulated hydrophobic/hydrophilic model drugs diminished the porosity of hydrogel from 81.62 ± 2.25% to 69.98 ± 3.07%. Interactions between components of hydrogel, demonstrated by FTIR spectroscopy and rheology, generated a network that was able to trap bioactive components and delay the burst delivery. The thixotropic behavior of hydrogel provided adaptability to facilitate its implantation in a minimally invasive way. Release profiles from microspheres included or not in hydrogel revealed a two-phase behavior with a burst- and a controlled-release period. The same release rate for microspheres included or not in the hydrogel in the controlled-release period demonstrated that mass transfer process was controlled by internal diffusion. Effective diffusion coefficients, D eff, that describe internal diffusion inside microspheres, and mass transfer coefficients, h, i.e. the contribution of hydrogel to mass transfer, were determined using 'genetic algorithms', obtaining values between 2.64·10-15 and 6.67·10-15 m2/s for D eff and 8.50·10-10 to 3.04·10-9 m/s for h. The proposed model fits experimental data, obtaining an R 2-value ranged between 95.41 and 98.87%. In vitro culture of mesenchymal stem cells in hydrogel showed no manifestations of intolerance or toxicity, observing an intense proliferation of the cells after 7 days, being most of the scaffold surface occupied by living cells.

Therapeutic potential of andrographolide-loaded nanoparticles on a murine asthma model

Corticosteroids commonly prescribed in asthma show several side-effects. Relatively non-toxic andrographolide (AG) has an anti-asthmatic potential. But its poor bioavailability and short plasma half-life constrain its efficacy. To overcome them, we encapsulated AG in nanoparticle (AGNP) and evaluated AGNP for anti-asthmatic efficacy on murine asthma model by oral/pulmonary delivery. AGNP had 5.47% drug loading with a sustained drug release in vitro. Plasma and lung pharmacokinetic data showed predominantly improved AG-bioavailability upon AGNP administered orally/by pulmonary route. Cell numbers, IL-4, IL-5, and IL-13 levels in broncho-alveolar lavage fluid and serum IgE content were reduced significantly after administration of AGNP compared to free-AG treatment. AGNP-mediated suppression of NF-κβ was predominantly more compared to free-AG. Further, pulmonary route showed better therapeutic performance. In conclusion, AGNP effectively controlled mild and severe asthma and the pulmonary administration of AGNP was more efficacious than the oral route.

Targeted Delivery of Surface-Modified Nanoparticles: Modulation of Inflammation for Acute Lung Injury

Nanocarriers have been widely employed in the diagnosis and treatment of various diseases. The drug release kinetics and pharmacodynamics could be adjusted by changing the materials, designs, and physicochemical properties of the carriers. Furthermore, the carrier surface could be modified to minimize the particle clearance, increase the circulation duration, escape the biological protective mechanisms, penetrate through physical barriers, and prolong the residence of the drug at the target site. Among lung diseases, acute lung injury has been considered life-threatening with approximately 190,000 cases and 74,500 deaths per year in the USA. Numerous researches have reported the efficacy of drug-encapsulated nanoparticles in the treatment of acute lung injury. The use of nanoparticles could help minimize the effect of airway defenses in the lung, thus provides a prolonged retention, sustained drug release, and targeted delivery to the lung tissues. Meanwhile, the toxicity of nanoparticles in the lungs needs to be investigated thoroughly to alleviate the safety concerns. In this chapter, we discuss the targeted pulmonary delivery of surface-modified nanocarriers to efficiently treat acute lung injury.

Microfluidic Based Fabrication and Characterization of Highly Porous Polymeric Microspheres

Polymeric porous particles are currently used for various applications in biotechnology, tissue engineering and pharmaceutical science, e.g., floating drug delivery systems and inhaled formulations. Particle shape and size depend on variable parameters; among them, polymer type and concentration, stirring speed, pH and type of solvent. In this study, porous poly(lactic-co-glycolic) acid (PLGA) and poly(d,l-lactide) (PLA) microspheres (MPs), with varying sizes and morphologies, were synthesized and optimized using both batch formulation and a flow-focusing microfluidic device. A well-established method of preparation utilizing solvent evaporation and the double emulsion technique was performed. Similar to other batch encapsulation methods, this technique is time and reagent consuming and consists of several steps. Hence, although porous structures provide tremendous opportunity in the design of new applications for tissue engineering and as improved controlled-release carriers, the synthesis of these particles with predefined properties remains challenging. We demonstrated the fabrication of porous MPs using a simple microfluidic device, compared to batch synthesis fabrication; and the effect of solvent, polymer concentration and type, post-hydrolysis treatment, on porosity degree. Moreover, a kinetic release study of fluorescent molecule was conducted for non-porous in comparison to porous particles. An overview of future prospects and the potential of these porous beads in this scientific area are discussed.

Targeting oxidative stress using tri-needle electrospray engineered Ganoderma lucidum polysaccharide-loaded porous yolk-shell particles

Chronic lung diseases (e.g. chronic obstructive pulmonary disease and asthma) are associated with oxidative stress and common treatments include various types of inhalation therapies. In this work Ganoderma lucidum polysaccharide (GLP), a naturally occurring antioxidant is loaded into porous Poly (ε-caprolactone) (PCL) particles using a single step tri-needle coaxial electrospray process (Tri-needle CES); with a view to develop therapies to combat oxidative stress. Based on the core-shell structure of porous yolk shell particles (YSPs), GLP-loaded YSPs displayed a bi-phasic release pattern. In vitro cell studies indicate GLP-loaded porous YSPs display good biocompatibility and positive attributes towards H₂O₂-induced oxidative stress in MRC-5 cells and dramatically attenuate intracellular reactive oxygen species (ROS) levels as well as significantly increase cell viability. In vivo inhalation studies indicate that GLP-loaded porous YSPs can be delivered to deep lung tissue and remain deposited for over 48 h and are subsequently removed by natural clearance mechanisms. Based on current findings GLP-loaded porous YSPs are suitable for pulmonary delivery and display good inhalation therapy potential to treat chronic lung diseases.

Delivery system for budesonide based on lipid-DNA

Budesonide is a hydrophobic glucocorticoid with high anti-inflammatory activity for the treatment of asthma, inflammatory bowel disease and rheumatoid arthritis. A micellar drug-delivery system based on lipid-DNA may provide a strategy to maximize its drug efficacy and reduce adverse effects. In this work, we report the use of lipid-DNAA (UU11mer), featuring two hydrophobic alkyl chains and forming micelles at a comparatively low critical micelle concentration, to render budesonide water-soluble with a high loading capacity (LC). The inhibition of interleukin-8 (IL-8) release shows that the new delivery system retains the inhibitory activity in cell-based assays. In conclusion, this research provides a novel approach to formulate and administer budesonide in a non-invasive manner, which dramatically improves its water-solubility while retaining its bioavailability.

Sustained therapeutic efficacy of budesonide-loaded chitosan swellable microparticles after lung delivery: Influence of in vitro release, treatment interval and dose

Sustained drug delivery to the respiratory tract is highly desirable for local treatment of chronic lung diseases. In this context, a correlation of in vitro drug release with in vivo efficacy data is essential to accelerate the application of sustained drug delivery system for inhalation into the clinical setting. In this study, budesonide was incorporated into distinct chitosan-based swellable microparticles, which were characterized, and the in vitro drug release behavior determined. The particles were then given to an allergic asthma animal model as single and successive administrations, and the therapeutic response was determined by measuring cell counts, IL-4 and IL-5 levels in bronchoalveolar lavage fluid, IL-4 and IL-5 mRNA in the lung and by histopathologic examination of lung tissues. After a single administration, the time-dependent therapeutic effect of the swellable microparticles was correlated with the in vitro release behavior, which lasted for 12 or 18 h depending on the molecular weight of the chitosan. After seven days of successive treatment, the number of eosinophils decreased further and IL-4 and IL-5 mRNA expression in the lung tissue was more greatly inhibited. Moreover, the chitosan-based swellable microparticles allowed longer administration intervals (every two days), which decreased the required dose for effectiveness by 50%. These results demonstrate that chitosan-based swellable microparticles can sustain the therapeutic effect of budesonide in the respiratory tract which in principal can be applied to other drugs for the treatment of local lung diseases.

Oral delivery of curcumin via porous polymeric nanoparticles for effective ulcerative colitis therapy

Oral drug delivery has been considered as a promising strategy for ulcerative colitis (UC) therapy. Here, an emulsion solvent evaporation technique was employed to prepare non-porous curcumin (CUR)-loaded polymeric nanoparticles (NPs) and porous CUR-loaded polymeric NPs in the absence or presence of ammonium bicarbonate. The resultant CUR-loaded NPs (non-porous NPs and porous NPs) had a desirable mean particle size of around 260 nm with a narrow size distribution, a uniform pore size distribution, slightly negative-charged surface, high encapsulation efficiency and controlled drug release capacity. In vitro experiments indicated that Raw 264.7 macrophages exhibited time-dependent accumulation profiles of NPs during the initial 2 h of co-incubation. Furthermore, we found that porous NPs inhibited the secretion of the main pro-inflammatory cytokines (TNF-α, IL-6 and IL-12) and the production of reactive oxygen species much more efficiently than non-porous NPs. Most importantly, in vivo studies demonstrated that oral administered porous NPs had a superior therapeutic efficiency in alleviating UC compared with non-porous NPs. The results collectively suggest that porous polymeric NPs can be exploited as efficient oral drug carriers for UC treatment.

Design and optimization of PLGA microparticles for controlled and local delivery of Neuregulin-1 in traumatic spinal cord injury

Spinal cord injury (SCI) results in significant tissue damage that underlies functional impairments. Pharmacological interventions to confer neuroprotection and promote cell replacement are essential for SCI repair. We previously reported that Neuregulin-1 (Nrg-1) is acutely and permanently downregulated after SCI. Nrg-1 is a critical growth factor for differentiation of neural precursor cells (NPCs) into myelinating oligodendrocytes. We showed that intrathecal delivery of Nrg-1 enhances oligodendrocyte replacement following SCI. While an effective delivery system, intrathecal and systemic administration of growth factors with diverse biological targets may pose adverse off-target effects. Here, we have developed and optimized an injectable biodegradable poly(lactic-co-glycolic acid) (PLGA) microparticles system for sustained and prolonged intraspinal delivery of Nrg-1 in SCI. Recombinant human Nrg-1β1 peptide was encapsulated into PLGA microparticles. Optimal Nrg-1 release rate and duration were achieved by manipulating the porosity and size of PLGA particles. Our in vitro analysis showed a direct correlation between particle size and porosity with Nrg-1 release rate, while Nrg-1 loading efficiency in PLGA microparticles was inversely correlated with particle porosity. In SCI, local intraspinal injection of PLGA-Nrg-1 microparticles maintained significantly higher tissue levels of Nrg-1 for a long-term duration compared to Nrg-1 delivered intrathecally by osmotic pumps. Bioactivity of Nrg-1 in PLGA microparticles was verified by promoting oligodendrocyte differentiation of NPCs in vitro, and preservation of oligodendrocytes and axons in SCI. PLGA-Nrg-1 also attenuated neuroinflammation and glial scarring following SCI. We show, for the first time, the feasibility, efficacy and safety of PLGA microparticle system for local and controlled administration of Nrg-1 in SCI.

Cationic CaMKII Inhibiting Nanoparticles Prevent Allergic Asthma

Asthma is a common lung disease affecting over 300 million people worldwide and is associated with increased reactive oxygen species, eosinophilic airway inflammation, bronchoconstriction, and mucus production. Targeting of novel therapeutic agents to the lungs of patients with asthma may improve efficacy of treatments and minimize side effects. We previously demonstrated that Ca²⁺/calmodulin-dependent protein kinase (CaMKII) is expressed and activated in the bronchial epithelium of asthmatic patients. CaMKII inhibition in murine models of allergic asthma reduces key disease phenotypes, providing the rationale for targeted CaMKII inhibition as a potential therapeutic approach for asthma. Herein we developed a novel cationic nanoparticle (NP)-based system for delivery of the potent and specific CaMKII inhibitor peptide, CaMKIIN, to airways.1 CaMKIIN-loaded NPs abrogated the severity of allergic asthma in a murine model. These findings provide the basis for development of innovative, site-specific drug delivery therapies, particularly for treatment of pulmonary diseases such as asthma.

Disulfiram-loaded porous PLGA microparticle for inhibiting the proliferation and migration of non-small-cell lung cancer

In this study, poly(lactic-co-glycolic acid) (PLGA) was used as a carrier to construct disulfiram-loaded porous microparticle through the emulsion solvent evaporation method, using ammonium bicarbonate as a porogen. The microparticle possessed highly porous surface, suitable aerodynamic diameter for inhalation (8.31±1.33 µm), favorable drug loading (4.09%±0.11%), and sustained release profile. The antiproliferation effect of release supernatant was detected through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay using non-small-cell lung cancer A549 as a model, with only 13.3% of cell viability observed for the release supernatant at 7 days. The antiproliferation mechanism was elucidated to be associated with the enhanced induction of cell apoptosis and cell cycle arrest at S phase through flow cytometry and Western blotting analysis. Finally, wound healing and transwell migration assay showed that they could efficiently inhibit the cell migration. These results demonstrated that disulfiram-loaded porous PLGA microparticle could achieve favorable antitumor efficiency, implying the potential of treating non-small-cell lung cancer in a pulmonary administration.

One mechanism of glucocorticoid action in asthma may involve the inhibition of IL-25 expression

While the mechanism of action of classic cytokines in asthma has received increased attention from researchers, certain non-classical cytokines, such as IL-25, also participate in this mechanism. The present study was performed to investigate the changes in IL-25 (IL-17E) mRNA and protein in bronchial asthma and to further characterize the mechanism underlying the action of glucocorticoids in asthma. A total of 96 specific pathogen-free BALB/c male mice were randomly divided into three normal groups (after the first allergization, after the second allergization and after excitation), three asthma groups (with the same three subgroups), a dexamethasone group and a budesonide group (n=12/group). An asthma model was established via the ovalbumin-sensitized excitation method. Mice in the dexamethasone group received intraperitoneal injections of dexamethasone 1 h prior to each excitation, the budesonide group received a budesonide suspension via inhalation 2 h before and after each provocation, and the normal group was sensitized and challenged with isotonic saline. IL-25 protein expression levels in the bronchoalveolar lavage fluid were measured by ELISA, and the relative IL-25 mRNA content in lung tissue was determined by reverse transcription-quantitative polymerase chain reaction. Compared with the normal groups, both the protein and mRNA levels of IL-25 were significantly increased (P<0.05) in the asthma groups. Dexamethasone and budesonide groups exhibited significant protein and mRNA reductions in IL-25, as compared with the asthma group after excitation (P<0.05), whereas these two groups significantly increased levels compared with the normal group after excitation (P<0.05). No significant differences in IL-25 mRNA expression levels were detected in the dexamethasone and budesonide groups when compared with the normal group after excitation. Therefore, we conclude that IL-25 is involved throughout the process of inflammation and inflammatory immune pathogenesis in asthma. One of the mechanisms of glucocorticoid action in asthma may involve inhibition of IL-25 expression.