Co-encapsulating nanostructured lipid carriers for transdermal application: from experimental design to the molecular detail

Microfluidics-on-a-chip for designing celecoxib-based amorphous solid dispersions: when the process shapes the product

The fundamental idea underlying the use of amorphous solid dispersions (ASDs) is to make the most of the solubility advantage of the amorphous form of a drug. However, the drug stability becomes compromised due to the higher free energy and disorder of molecular packing in the amorphous phase, leading to crystallization. Polymers are used as a matrix to form a stable homogeneous amorphous system to overcome the stability concern. The present work aims to design ASD-based formulations under the umbrella of quality by design principles for improving oral drug bioavailability, using celecoxib (CXB) as a model drug. ASDs were prepared from selected polymers and tested both individually and in combinations, using various manufacturing techniques: high-shear homogenization, high-pressure homogenization, microfluidics-on-a-chip, and spray drying. The resulting dispersions were further optimized, resorting to a 32 full-factorial design, considering the drug:polymers ratio and the total solid content as variables. The formulated products were evaluated regarding analytical centrifugation and the influence of the different polymers on the intrinsic dissolution rate of the CXB-ASDs. Microfluidics-on-a-chip led to the amorphous status of the formulation. The in vitro evaluation demonstrated a remarkable 26-fold enhancement in the intrinsic dissolution rate, and the translation of this formulation into tablets as the final dosage form is consistent with the observed performance enhancement. These findings are supported by ex vivo assays, which exhibited a two-fold increase in permeability compared to pure CXB. This study tackles the bioavailability hurdles encountered with diverse active compounds, offering insights into the development of more effective drug delivery platforms.

Question-based review for pharmaceutical development: An enhanced quality approach

Over the last years, the pharmaceutical industry has faced real challenges regarding quality assurance. In this context, the establishment of more holistic approaches to the pharmaceutical development has been encouraged. The emergence of the Quality by Design (QbD) paradigm as systematic, scientific and risk-based methodology introduced a new concept of pharmaceutical quality. In essence, QbD can be interpreted as a strategy to maximize time and cost savings. An in-depth understanding of the formulation and manufacturing process is demanded to optimize the safety, efficacy and quality of a drug product at all stages of development. This innovative approach streamlines the pharmaceutical Research and Development (R&D) process, provides greater manufacturing flexibility and reduces regulatory burden. To assist in QbD implementation, International Conference on Harmonisation (ICH), U.S. Food and Drug Administration (FDA) and European Medicines Agency (EMA) organized and launched QbD principles in their guidance for industry, identifying key concepts and tools to design and develop a high-quality drug product. Despite the undeniable advantages of the QbD approach, and the widespread information on QbD regulatory expectations, its full implementation in the pharmaceutical field is still limited. The present review aims to establish a crosswise overview on the current application status of QbD within the framework of the ICH guidelines (ICH Q8(R2) - Q14 and ICH Q2(R2)). Moreover, it outlines the way information gathered from the QbD methodology is being harmonized in Marketing Authorization Applications (MAAs) for European market approval. This work also highlights the challenges that hinder the deployment of the QbD strategy as a standard practice.

Acacetin-loaded microemulsion for transdermal delivery: preparation, optimization and evaluation

CONTEXT

Acacetin is reported as a potential drug candidate for the treatment of atrial fibrillation. However, clinical applications are limited by poor water solubility, limited ethanol solubility, and extremely low oral bioavailability.

OBJECTIVE

The present study prepared and evaluated acacetin-loaded microemulsion (ME) to achieve efficient pharmacokinetics together with no or minimal invasiveness for transdermal delivery.

MATERIALS AND METHODS

The formulation of ME was determined by the water titration method based on solubility results. The optimized formulation was achieved by the simplex lattice experiment design. The optimized ME formulations FA, FB and FC (FA with 10% and 50% DMSO as enhancers, respectively) were evaluated by ex vivo permeation with Franz diffusion cell and excised mice skin. In vivo pharmacokinetic studies were also performed at 8 mg/kg in rats within 6 h by transdermal administration.

RESULTS

The optimal ME (FA) was comprised of 12.2% caprylic acid decanoate monoditriglyceride (MCF-NF), 39.8% Smix (RH40: Trans = 2:1 w/w) and 48% water, respectively. Acacetin-loaded FA with particle size 36.0 ± 3.6 nm and drug solubility 803.7 ± 32.1 mg/g was prepared. FB had significantly higher cumulative amounts and higher AUC_0-∞ (196.6 ± 11.0 min × μg/mL, p < 0.05) than that FA alone (121.4 ± 33.1 min × μg/mL).

DISCUSSION AND CONCLUSIONS

The formulation of ME combined with the penetration enhancer can effectively improve the solubility and percutaneous absorption efficiency of acacetin, providing a new option for the non-invasive delivery of acacetin.

Peptide-containing nanoformulations: Skin barrier penetration and activity contribution

Transdermal drug delivery presents a less invasive pathway, circumventing the need to pass through the gastrointestinal tract and liver, thereby reducing drug breakdown, initial metabolism, and gastrointestinal discomfort. Nevertheless, the unique composition and dense structure of the stratum corneum present a significant barrier to transdermal delivery. This article presents an overview of the current developments in peptides and nanotechnology to address this challenge. Initially, we sum up peptide-containing nanoformulations for transdermal drug delivery, examining them through the lenses of both inorganic and organic materials. Particular emphasis is placed on the diverse roles that peptides play within these nanoformulations, including conferring functionality upon nanocarriers and enhancing the biological efficacy of drugs. Subsequently, we summarize innovative strategies for enhancing skin penetration, categorizing them into passive and active approaches. Lastly, we discuss the therapeutic potential of peptide-containing nanoformulations in addressing a range of diseases, drawing insights from the biological activities and functions of peptides. Furthermore, the challenges hindering clinical translation are also discussed, providing valuable insights for future advancements in transdermal drug delivery.

A quality by design framework for developing nanocrystal bioenabling formulations

The present study aims to outline a rational framework for the design and development of a 1.0% (w/v) hydrocortisone nanocrystal-based formulation, resorting to a simple, efficient, and scalable nanonization methodology, based on the high-pressure homogenization (HPH) technique. Accordingly, the innovative product was comprehensively optimized following a Quality by Design (QbD) approach. The thorough selection of formulation composition was driven by a dual purpose: improving skin permeation and stability. In the early stage of development, a Failure Mode, Effects and Criticality Analysis (FMECA) diagram was employed to identify the most impactful variables for the critical quality attributes (CQAs). In this sense, a rotatable, three-factor and five-level circumscribed central composite design (CCCD) was applied to investigate how squalene concentration (x1), soluplus concentration (x2) and HPH-time (x3) influence physicochemical properties, performance and physical stability of the formulation. A robust Design Space (DS) was defined, establishing the optimal settings for the critical variables, whose combination meets the requirements set in the quality target product profile (QTPP). Morphological analysis revealed the cuboidal shape of hydrocortisone nanocrystals. In what concerns colloidal properties, the most promising formulation disclosed a small particle size (Dx(50) = 311.8 ± 1.5 nm), along with narrow size distribution (span value = 1.91 ± 0.17). Zeta potential results (-2.19 ± 0.15 mV--12.1 ± 0.4 mV) suggested a steric hindrance stabilization. FTIR spectra showed no chemical interactions between drug and formulation components. XRD diffractograms confirmed loss of crystallinity during the downsizing process. In vitro studies revealed an improvement on drug release rate (316 ± 21-516 ± 35 μg/cm2/√t), compared to the coarse suspension and commercial products, and a straight dependence on the stabilizer concentration and HPH time. The permeation flux across the skin (0.16 ± 0.02-1.2 ± 0.5 μg/cm2/h) appeared to be dependent on the drug physicochemical properties, in particular saturation solubility. Further characterization of the experimental formulations pointed out the role of the stabilizing component to prevent against physical instability phenomena. This organic solvent-free, and therefore "green" nanocrystal production technology offers great potential for pharmaceutical R&D and drug delivery by enabling the development of new forms of conventional drugs with optimal physicochemical properties and performance.

Lipid nanoparticles containing coenzyme Q10 for topical applications: An overview of their characterization

The coenzyme Q10 is a compound widely used in pharmaceutical and cosmetic formulations because it is a potent eliminator of free radicals, giving it antioxidant and anti-aging properties. It is naturally synthesized by the human body, but its production wanes with age, leading to the formation of wrinkles. The efficacy of topical application of the coenzyme to counteract this process is subject to several difficulties, due to its instability in the presence of light, low solubility in water and high lipophilicity. Because of these drawbacks, many studies have been conducted of release systems. Lipid nanoparticles stand out in this sense due to the advantages of skin compatibility, protection of the active ingredient against degradation in the external medium, capacity to increase penetration of that ingredient in the skin, and its controlled and prolonged release. In this context, this article presents a review of the main studies of the coenzyme Q10 encapsulated in lipid nanoparticles for topical use, focusing on the analytic methods used to characterize the systems regarding morphology, zeta potential, release profile, Q10 content, encapsulation efficiency, crystalline organization and structure of the lipid matrix, rheology, antioxidant activity, skin penetration and efficacy, among other aspects. We also describe the main results of the different studies and discuss the critical aspects - the simplest, most reproducible, best, and most relevant - that characterize lipid nanoparticles with encapsulated Q10 for topical use.

Piper aduncum Essential Oil Rich in Dillapiole: Development of Hydrogel-Thickened Nanoemulsion and Nanostructured Lipid Carrier Intended for Skin Delivery

The essential oil extracted from the leaves of Piper aduncum, an aromatic plant from the Amazon region, is rich in dillapiole and presents anti-inflammatory activity. In this study, nanoemulsions (NE) and nanostructured lipid carriers (NLC), which are biocompatible nanostructured systems of a lipid nature, were prepared by high-pressure homogenization for the yet unexplored skin delivery of dillapiole. The addition of hydroxyethylcellulose produced hydrogel-thickened NE or NLC in view to improving the viscosity and skin adherence of the nanoformulations. Formulations were characterized with respect to dillapiole content, droplet size, polydispersity index, zeta potential, morphology, rheological behavior, bioadhesion, skin permeation profile, and in vitro irritancy (HET-CAM). The formulations developed presented spherical, homogeneous nanometric particle size (around 130 nm), narrow polydispersity index (<0.3), and negative zeta potential (around −40 mV). Dillapiole content was slightly lower in NLC compared to NE since the production process involves heating. The hydrogels containing nanocarriers showed pseudoplastic behavior with bioadhesive characteristics. The developed formulations exhibited a controlled release profile, dillapiole delivery up to the dermis, the layer of interest for anti-inflammatory potential, and low irritant potential in the chorioallantoic membrane (HET-CAM). Both hydrogels-thickened NE and NLC seemed to be promising formulations for skin delivery of Piper aduncum essential oil.

Chitosan-coated nanostructured lipid carriers for transdermal delivery of tetrahydrocurcumin for breast cancer therapy

Chitosan (Ch)-coated nanostructured lipid carriers (NLCs) have great potential for transdermal delivery with high localization of chemotherapeutics in breast cancer. This study used tetrahydrocurcumin (THC), a primary metabolite of curcumin with enhanced antioxidant and anticancer properties, as a model compound to prepare NLCs. Response surface methodology was employed to optimize THC-loaded Ch-coated NLCs (THC-Ch-NLCs) fabricated by high-shear homogenization. The optimized THC-Ch-NLCs had particle size of 244 ± 18 nm, zeta potential of -17.5 ± 0.5 mV, entrapment efficiency of 76.6 ± 0.2% and drug loading of 0.28 ± 0.01%. In vitro release study of THC-Ch-NLCs showed sustained release following the Korsmeyer-Peppas model with Fickian and non-Fickian diffusion at pH 7.4 and 5.5, respectively. THC-Ch-NLCs demonstrated significantly enhanced in vitro skin permeation, cell uptake, and remarkable cytotoxicity toward MD-MBA-231 breast cancer cells compared to the unencapsulated THC, suggesting Ch-NLCs as potential transdermal nanocarriers of THC for triple-negative breast cancer treatment.

Improvements in Drug-Delivery Properties by Co-Encapsulating Curcumin in SN-38-Loaded Anticancer Polymeric Nanoparticles

SN-38 is an immensely potent anticancer agent although its use necessitates encapsulation to overcome issues of poor solubility and stability. Since SN-38 is a notoriously challenging drug to encapsulate, new avenues to increase encapsulation efficiency in polymer nanoparticles (PNPs) are needed. In this paper, we show that nanoprecipitation with curcumin (CUR) increases SN-38 encapsulation efficiencies in coloaded SN-38/CUR-PNPs based on poly(ε-caprolactone)-block-poly(ethylene glycol) (PCL-b-PEG) by up to a factor of 10. In addition, we find a dramatic decrease in PNP polydispersities, from 0.34 to 0.07, as the initial CUR-to-polymer ratio increases from 0 to 10, with only a modest increase in PNP size (from 40 to 55 nm). Compared to coloaded PNP formation using nanoprecipitation in the bulk or in a gas-liquid, a two-phase microfluidic reactor shows similar trends with respect to CUR content, although improvements in SN-38 encapsulation efficiencies both with and without CUR are found using the microfluidic method. Additional precipitation studies without copolymer suggest that CUR increases the dispersion of SN-38 in the solvent medium of micelle formation, which may contribute to the observed encapsulation enhancement. Cytotoxicity studies of unencapsulated SN-38/CUR mixtures show that addition of CUR does not significantly affect SN-38 potency against either U87 (glioblastoma) or A204 (rhabdomyosarcoma) cell lines. However, we find significant differences in the potencies of SN-38/CUR-PNP formulations depending on initial CUR amounts, with an optimized formulation showing subnanomolar cytotoxicity against A204 cells, significantly more potent than either free SN-38 or PNPs containing only SN-38.

The protective impact of adapted trimebutine maleate-loaded nanostructured lipid carriers for alleviating the severity of acute colitis

Nanoparticles for colon-drug delivery were designed and evaluated to solve many discrepancy issues such as high adverse effects of released drugs, insufficient drug amount at diseased areas, and unintentionally premature drug release to noninflamed GIT regions. Herein, the goal of this work was to convert trimebutine maleate (TMB) into nanostructured lipid carriers (NLC) in order to improve its protective effects in ulcerative colitis. NLC of TMB was prepared by the hot homogenization followed by ultra-sonication method. A full 4²-factorial design was used to estimate the produced TMB-NLC. The study design included the exploration of the impact of two independent variables namely lipid mix amount and ratio (glyceryl mono stearate and capryol 90), surfactant concentration (0.5, 1, 1.5, and 2%), on the particle size, polydispersity index, and the entrapment efficiency (EE%). The protective activity of F9 was examined through macroscopical scores, histopathological changes, immunohistochemical localization of tumor necrosis factor-α (TNF-α) and examination of oxidative stress such as reduced glutathione (GSH), superoxide dismutase (SOD), and malondialdehyde (MDA) against acetic acid-induced colitis in rats. Consistent with our expectations, the orally administered optimized formula (F9) alleviated the severity of colitis in acetic acid-induced rat model of colitis likely owing to the controlled release compared to free TMB. We aimed to develop TMB-loaded NLC for the treatment of acute colitis with the goal of providing a superior drug safety profile over long-term remission and maintenance therapy.

A Stepwise Framework for the Systematic Development of Lipid Nanoparticles

A properly designed nanosystem aims to deliver an optimized concentration of the active pharmaceutical ingredient (API) at the site of action, resulting in a therapeutic response with reduced adverse effects. Due to the vast availability of lipids and surfactants, producing stable lipid dispersions is a double-edged sword: on the one hand, the versatility of composition allows for a refined design and tuning of properties; on the other hand, the complexity of the materials and their physical interactions often result in laborious and time-consuming pre-formulation studies. However, how can they be tailored, and which premises are required for a “right at first time” development? Here, a stepwise framework encompassing the sequential stages of nanoparticle production for disulfiram delivery is presented. Drug in lipid solubility analysis leads to the selection of the most suitable liquid lipids. As for the solid lipid, drug partitioning studies point out the lipids with increased capacity for solubilizing and entrapping disulfiram. The microscopical evaluation of the physical compatibility between liquid and solid lipids further indicates the most promising core compositions. The impact of the outer surfactant layer on the colloidal properties of the nanosystems is evaluated recurring to machine learning algorithms, in particular, hierarchical clustering, principal component analysis, and partial least squares regression. Overall, this work represents a comprehensive systematic approach to nanoparticle formulation studies that serves as a basis for selecting the most suitable excipients that comprise solid lipid nanoparticles and nanostructured lipid carriers.

Formulation and Characterization of Febuxostat Loaded Nanostructured Lipid Carriers (NLCs) - Gel for Topical Treatment of Gout

BACKGROUND

The aim of the present study was to formulate and characterize Nano- Structured Lipid Carriers (NLCs) of Febuxostat (FB) incorporated in the gel for the treatment of Gout. FB is a Xanthine Oxidase (XO) inhibitor drug used for chronic Gout and hyperuricemia. FB is a BCS class II drug, therefore, water solubility is very poor, and due to its poor solubility and wettability, it leads to poor dissolution. The hot high-pressure homogenization technique was used in this study to improve the physicochemical property of FB.

METHODS

The carbopol 934 was used to prepare NLCs gel of FB. The NLCs of FB was prepared in different drug: polymer ratios w/w (2:1), (1:1), (1:2), (1:3) and (1:4) with solid lipid (Stearic Acid) and liquid lipid (Oleic acid). The preformulation study of FB included FTIR study melting point, standard calibration curves, and drug-polymer interaction study.

RESULTS

The NLCs (1:3) showed high entrapment and drug content. The NLCs gel formulation was 87% released within 6 hours in a controlled manner.

CONCLUSION

NLCs gel modifies the drug release, increases the bioavailability, and reduces side effects of FB. The prepared gel is the efficient formulation for the better treatment of chronic gout and hyperuricemia. The research findings have shown the undesirable side effects associated with the oral route that can be reduced by the use of NLCs formulation through the transdermal route in an effective manner.

Encapsulated Escitalopram and Paroxetine Intranasal Co-Administration: In Vitro/In Vivo Evaluation

Depression is a common mental disorder. Its treatment with selective serotonin reuptake inhibitors (SSRIs) is effective only in a fraction of patients, and pharmacoresistance is increasing steadily. Intranasal (IN) drug delivery to the brain stands out as a promising strategy to improve current therapeutic approaches by operating as a shuttle to overcome the blood–brain barrier. This work aimed to simultaneously administer escitalopram and paroxetine by IN route to mice. For this purpose, three nanostructured lipid carriers (NLC1, NLC2, and BorNLC) and one nanoemulsion (NE) were tested for drug loading. After their characterization, investigation of their impact on nasal cell viability and SSRI permeability assays were performed, using a human nasal RPMI 2650 cell line in air–liquid interface. In vitro assays demonstrated that NLCs, including borneol (BorNLC), significantly increased escitalopram permeability (p < 0.01) and paroxetine recovery values (p < 0.05) in relation to the other formulations and non-encapsulated drugs. IN and intravenous (IV) pharmacokinetic studies performed in vivo with a single dose of 2.38 mg/kg demonstrated similar results for escitalopram brain-to-plasma ratios. IN administrations delayed escitalopram peak concentrations in the brain for 15–60 min and no direct nose-to-brain delivery was detected. However, encapsulation with BorNLC considerably decreased escitalopram exposure in the lungs (124 μg min/g) compared with free escitalopram by IN (168 μg min/g) and IV (321 μg min/g) routes. Surprisingly, BorNLC IN instillation increased concentration levels of paroxetine in the brain by five times and accelerated brain drug delivery. Once again, lung exposure was considerably lower with BorNLC (AUC_t = 0.433 μg min/g) than that with IV administration (AUC_t = 1.01 μg min/g) and non-encapsulated IN formulation (AUC_t = 2.82 μg min/g). Direct nose-to-brain delivery was observed for paroxetine IN administration with a direct transport percentage (DTP) of 56.9%. If encapsulated, it increases to 74.2%. These results clearly emphasize that nose-to-brain delivery and lung exposure depend on the formulation and on the characteristics of the drug under investigation. NLCs seem to be an advantageous strategy for nose-to-brain delivery of lipophilic molecules, since they reduce systemic and lung exposure, thereby decreasing adverse effects. For hydrophilic compounds, NLCs are particularly important to decrease lung exposure after IN administration.

Essential Oil and Hydrophilic Antibiotic Co-Encapsulation in Multiple Lipid Nanoparticles: Proof of Concept and In Vitro Activity against Pseudomonas aeruginosa

In the worldwide context of an impending emergence of multidrug-resistant bacteria, this research combined the advantages of multiple lipid nanoparticles (MLNs) and the promising therapeutic use of essential oils (EOs) as a strategy to fight the antibiotic resistance of three Pseudomonas aeruginosa strains with different cefepime (FEP) resistance profiles. MLNs were prepared by ultrasonication using glyceryl trioleate (GTO) and glyceryl tristearate (GTS) as a liquid and a solid lipid, respectively. Rosemary EO (REO) was selected as the model EO. REO/FEP-loaded MLNs were characterized by their small size (~110 nm), important encapsulation efficiency, and high physical stability over time (60 days). An assessment of the antimicrobial activity was performed using antimicrobial susceptibility testing assays against selected P. aeruginosa strains. The assays showed a considerable increase in the antibacterial property of REO-loaded MLNs compared with the effect of crude EO, especially against P. aeruginosa ATCC 9027, in which the minimum inhibitory concentration (MIC) value decreased from 80 to 0.6 mg/mL upon encapsulation. Furthermore, the incorporation of FEP in MLNs stabilized the drug without affecting its antipseudomonal activity. Thus, the ability to co-encapsulate an essential oil and a hydrophilic antibiotic into MLN has been successfully proved, opening new possibilities for the treatment of serious antimicrobial infections.

Applications of innovative technologies to the delivery of antipsychotics

Psychosis is a high-incidence pathology associated with a profound alteration in the perception of reality. The limitations of drugs available on the market have stimulated the search for alternative solutions to achieve effective antipsychotic therapies. In this review, we evaluate innovative formulations of antipsychotic drugs developed through the application of modern pharmaceutical technologies, including classes of micro and nanocarriers, such as lipid formulations, polymeric nanoparticles (NPs), solid dispersions, and cyclodextrins (CDs). We also consider alternative routes of administration to the oral and parenteral ones currently used. Improved solubility, stability of preparations, and pharmacokinetic (PK) and pharmacodynamic (PD) parameters confirm the potential of these new formulations in the treatment of psychotic disorders.

Molecular perspective of efficiency and safety problems of chemical enhancers: bottlenecks and recent advances

Chemical penetration enhancer (CPE) is a preferred approach to improve drug permeability through the skin, due to its unique advantages of simple use and high compatibility. However, CPEs efficiency and safety problems frequently arise, which greatly restrains the further application in transdermal drug delivery systems (TDDS). To get access to the root of problems, the efficiency and safety of CPEs are reviewed especially from molecular perspectives, which include (1) the possible factors of CPEs low efficiency; (2) the possible contribution of CPEs in the evolution of safety problems such as skin irritation and allergic reaction; (3) the interactive relationship between CPEs efficiency and safety, as well as the bottlenecks of achieving their balance. More importantly, based on these, recent advances are summarized in improving efficiency or safety of CPEs, which offers a guidance of rationally selecting CPEs in future research.

Dexmedetomidine and levobupivacaine co-loaded, transcriptional transactivator peptide modified nanostructured lipid carriers or lipid-polymer hybrid nanoparticles, which performed better for local anesthetic therapy?

Local anesthetics (LAs) have been widely applied in clinic for regional anesthesia, postoperative analgesia, and management of acute and chronic pain. Nanostructured lipid carriers (NLCs) and lipid–polymer hybrid nanoparticles (LPNs) are reported as good choices for LA therapy. Transactivated transcriptional activator (TAT) was reported as a modifier for the topical delivery of drugs. In the present study, TAT modified, levobupivacaine (LEV) and dexmedetomidine (DEX) co-delivered NLCs (TAT-LEV&DEX-NLCs, T-L&D-N) and LPNs (TAT-LEV&DEX-LPNs, T-L&D-L) were designed and compared for the LA therapy. T-L&D-L exhibited better efficiency in improving the skin permeation, analgesic time, and pain control intensity than T-L&D-N both in vitro and in vivo. On the other side, T-L&D-N also improved the therapeutic effect of drugs to a large extent. These two systems both exhibited superiority in some respects. TAT modified LPNs are more promising platform for the long-term local anesthesia.

Enhancement of bioavailability through transdermal drug delivery of paliperidone palmitate-loaded nanostructured lipid carriers

Aim: The work describes enhanced bioavailability of paliperidone palmitate through transdermal delivery using nanostructured lipid carriers (NLC). Materials & methods: NLCs were formulated by nanoprecipitation method followed by incorporation in transdermal patch and physicochemical characterization. Results: NLCs showed high percentage entrapment efficiency of 83.44 ± 0.8%, drug loading of 24.75 ± 1.10% (w/w), particle size of 173.8 ± 3.25 nm, polydispersity index of 0.143 ± 0.05 and zeta potential of -15.9 ± 0.75 mV. In vitro and ex vivo studies indicated zero-order controlled drug release from NLCs and transdermal patch up to 48 h. Pharmacokinetic studies indicated 1.76-fold enhanced bioavailability by transdermal route as compared with oral drug delivery. Conclusion: From the results, it was concluded that drug-loaded NLCs-transdermal patch is promising drug delivery system for poorly bioavailable drugs.

Nanomaterials in Skin Regeneration and Rejuvenation

Skin is the external part of the human body; thus, it is exposed to outer stimuli leading to injuries and damage, due to being the tissue mostly affected by wounds and aging that compromise its protective function. The recent extension of the average lifespan raises the interest in products capable of counteracting skin related health conditions. However, the skin barrier is not easy to permeate and could be influenced by different factors. In the last decades an innovative pharmacotherapeutic approach has been possible thanks to the advent of nanomedicine. Nanodevices can represent an appropriate formulation to enhance the passive penetration, modulate drug solubility and increase the thermodynamic activity of drugs. Here, we summarize the recent nanotechnological approaches to maintain and replace skin homeostasis, with particular attention to nanomaterials applications on wound healing, regeneration and rejuvenation of skin tissue. The different nanomaterials as nanofibers, hydrogels, nanosuspensions, and nanoparticles are described and in particular we highlight their main chemical features that are useful in drug delivery and tissue regeneration.

Dermatokinetic assessment of luliconazole-loaded nanostructured lipid carriers (NLCs) for topical delivery: QbD-driven design, optimization, and in vitro and ex vivo evaluations

The present study is concerned with the QbD-based design and development of luliconazole-loaded nanostructured lipid carriers (NLCs) hydrogel for enhanced skin retention and permeation. The NLCs formulation was optimized employing a 3-factor, 3-level Box-Behnken design. The effect of formulation variable lipid content, surfactant concentration, and sonication time was studied on particle size and % EE. The optimized formulation exhibited particle size of 86.480 ± 0.799 nm; 0.213 ± 0.004 PDI, ≥ - 10 mV zeta potential and 85.770 ± 0.503% EE. The in vitro release studies revealed sustained release of NLCs up to 42 h. The designed formulation showed desirable occlusivity, spreadability (0.748 ± 0.160), extrudability (3.130 ± 1.570), and the assay was found to be 99.520 ± 0.890%. The dermatokinetics assessment revealed the C_{max Skin} to be ~ 2-fold higher and AUC_0-24 to be ~ 3-fold higher in the epidermis and dermis of NLCs loaded gel in contrast with the marketed cream. The T_max of both the formulations was found to be 6 h in the epidermis and dermis. The obtained results suggested that luliconazole NLCs can serve as a promising formulation to enhance luliconazole's antifungal activity and also in increasing patient compliance by reducing the frequency of application.

Increased Therapeutic Efficacy of SLN Containing Etofenamate and Ibuprofen in Topical Treatment of Inflammation

Innovative formulations, including solid lipid nanoparticles (SLNs), have been sought to improve skin permeation of non-steroidal anti-inflammatory drugs (NSAIDs). The present study explores the use of SLNs, prepared using a fusion-emulsification method, to increase skin permeation and in vivo activity of two relevant NSAIDs: A liquid molecule (etofenamate) and a solid one (ibuprofen), formulated in a 2% hydroxypropyl methylcellulose gel through the gelation of SLN suspensions. Compritol^® 888 ATO and Tween^® 80 were used as a solid lipid and a surfactant, respectively. All production steps were up scalable, resulting in SLNs with high encapsulation efficiency (>90%), a mean particle size of <250 nm, a polydispersity index <0.2, and that were stable for 12 months. In vitro permeation, using human skin in Franz diffusion cells, showed increased permeation and similar cell viability in Df and HaCaT cell lines for SLN formulations when compared to commercial formulations of etofenamate (Reumon^® Gel 5%) and ibuprofen (Ozonol^® 5%). In vivo activity in the rat paw edema inflammation model showed that SLN hydrogels containing lower doses of etofenamate (8.3 times lower) and ibuprofen (16.6 times lower) produced similar effects compared to the commercial formulations, while decreasing edema and inflammatory cell infiltration, and causing no histological changes in the epidermis. These studies demonstrate that encapsulation in SLNs associated to a suitable hydrogel is a promising technological approach to NSAIDs dermal application.

Topical anesthetic and pain relief using penetration enhancer and transcriptional transactivator peptide multi-decorated nanostructured lipid carriers

Many strategies have been developed to overcome the stratum corneum (SC) barrier, including functionalized nanostructures. Chemical penetration enhancers (CPEs) and cell-penetrating peptides (CPP) were applied to decorate nanostructured lipid carriers (NLC) for topical anesthetic and pain relief. A novel pyrenebutyrate (PB-PEG-DSPE) compound was synthesized by the amide action of the carboxylic acid group of PB with the amido groups of DSPE-PEG. PB-PEG-DSPE has a hydrophobic group, hydrophilic group, and lipid group. The lipid group can be inserted into NLC to form PB functional NLC. In order to improve the penetrability, TAT and PB multi-decorated NLC were designed for the delivery of lidocaine hydrochloride (LID) (TAT/PB LID NLC). The therapeutic effects of NLC in terms of in vitro skin penetration and in vivo in animal models were further studied. The size of TAT/PB LID NLC tested by DLS was 153.6 ± 4.3 nm. However, the size of undecorated LID NLC was 115.3 ± 3.6 nm. The PDI values of NLC vary from 0.13 ± 0.01 to 0.16 ± 0.03. Zeta potentials of NLC were negative, between -20.7 and -29.3 mV. TAT/PB LID NLC (851.2 ± 25.3 µg/cm²) showed remarkably better percutaneous penetration ability than PB LID NLC (610.7 ± 22.1 µg/cm²), TAT LID NLC (551.9 ± 21.8 µg/cm²) (p < .05) and non-modified LID NLC (428.2 ± 21.4 µg/cm²). TAT/PB LID NLC exhibited the most prominent anesthetic effect than single ligand decorated or undecorated LID NLC in vivo. The resulting TAT/PB LID NLC exhibited good skin penetration and anesthetic efficiency, which could be applied as a promising anesthesia system.

Photoacoustic method for real-time assessment of salt content in aqueous solutions

In 2004, the Food and Drug Administration established the foundations for the application of process analytical technologies (PAT) in real-time control of the drug manufacturing process, where progress has been essentially directed to solid formulations. In order to enlarge the application of PAT principles to injectable drug products, the development of appropriate manufacturing process control tools is mandatory. Photoacoustics is a non-invasive technique with the potential for application in real-time control of the manufacturing process of injectable drug products. Herein, we applied a photoacoustic method for the determination of the concentration of salts (sodium chloride) in mono-salt formulations by measuring the changes induced in the speed of sound by density changes. This method was explored using two modes of generating the photoacoustic wave and two detectors with central frequencies of 10 MHz and 100 MHz. The results were analyzed using a 2^k full-factorial design, considering the generation mode and detection as independent variables. The optimized method was subsequently validated according to the International Council for Harmonisation (ICH) standards. The method showed good linearity, precision, and accuracy, with a lower limit of quantification of 0.05% (w/v) of NaCl and a limit of detection of 0.02% (w/v) of NaCl. Due to its simplicity and high throughput, this method has potential applicability as PAT in the manufacturing of injectable drug products.

Sorting hidden patterns in nanoparticle performance for glioblastoma using machine learning algorithms

Cationic compounds have been described to readily penetrate cell membranes. Assigning positive charge to nanosystems, e.g. lipid nanoparticles, has been identified as a key feature to promote electrostatic binding and design ligand-based constructs for tumour targeting. However, their intrinsic high cytotoxicity has hampered their biomedical application. This paper seeks to establish which cationic compounds and properties are compelling for interface modulation, in order to improve the design of tumour targeted nanoparticles against glioblastoma. How can intrinsic features (e.g. nature, structure, conformation) shape efficacy outcomes? In the quest for safer alternative cationic compounds, we evaluate the effects of two novel glycerol-based lipids, GLY1 and GLY2, on the architecture and performance of nanostructured lipid carriers (NLCs). These two molecules, composed of two alkylated chains and a glycerol backbone, differ only in their polar head and proved to be efficient in reversing the zeta potential of the nanosystems to positive values. The use of unsupervised and supervised machine learning (ML) techniques unraveled their structural similarities: in spite of their common backbone, GLY1 exhibited a better performance in increasing zeta potential and cytotoxicity, while decreasing particle size. Furthermore, NLCs containing GLY1 showed a favorable hemocompatible profile, as well as an improved uptake by tumour cells. Summing-up, GLY1 circumvents the intrinsic cytotoxicity of a common surfactant, CTAB, is effective at increasing glioblastoma uptake, and exhibits encouraging anticancer activity. Moreover, the use of ML is strongly incited for formulation design and optimization.

Development of Photoprotective Formulations Containing Nanostructured Lipid Carriers: Sun Protection Factor, Physical-Mechanical and Sensorial Properties

The effects of ultraviolet (UV) radiation emitted by the sun are cumulative and can result in chemical changes such as the generation of reactive oxygen species (ROS), leading to the regular use of sunscreen. As an alternative, the use of antioxidants, such as quercetin, into sunscreen can control these effects and provide additional skin photoprotection. However, quercetin presents low stability and poor permeation, alternatively, the encapsulation in nanoparticles can improve the stability and skin permeation. Thus, this study aimed to develop photoprotective formulations containing nanoencapsulated quercetin, characterize the physical-mechanical and sensorial properties, and evaluate the influence of nanocarriers on sun protection factor (SPF) and the immediate clinical effects. Sunscreen formulations with or without antioxidants in a free form or loaded in nanostructured lipid carriers (NLCs) were developed. After the stability, rheological behavior, texture profile, and in vivo SPF (sun protector factor) evaluation, sixty female participants, aged between 20 and 35 years, were enclosed to evaluate the sensorial properties and immediate clinical effects of the formulation in the skin hydration using biophysical and skin imaging techniques. The correlation of rheological behavior, texture profile, and sensory properties enabled the correct choice of formulation ingredients. In addition, the use of NLCs with quercetin significantly improved the SPF in vivo of the developed photoprotective formulation, without increasing the amount of UV filters. Finally, the association of NLCs in the photoprotective formulation showed synergistic effects in the SPF and an improvement in the skin barrier function and hydration.

Lecithins-Zein nanoparticles for antifungal treatment: Enhancement and prolongation of drug retention in skin with reduced toxicity

Fungal infections are one of the major skin healthcare issues and cause significant morbidity. Ketoconazole (KC) as a broad-spectrum antifungal drug is widely used to treat skin fungal diseases. However, its therapeutic effects are limited by low concentration, short duration of drug efficacy in the skin and severe systemic toxicity. Here, the ketoconazole loaded Lecithins-Zein nanoparticles (KLZ-NPs) with core-shell structure were designed to resolve above problems. In vitro penetration test confirmed that the ketoconazole concentration of the KLZ-NPs group in the stratum corneum and deeper layers increased significantly (2.98-fold, 1.51-fold higher to free ketoconazole, respectively). Meanwhile, follicular closing technique showed the formed nanoparticles via follicle pathway into the skin had been significantly enhanced, and the results of the visual fluorescent images also confirmed it. Additionally, in the in vivo imaging experiment, the fluorescence intensity of the single applying of the DiR-LZ-NPs was higher than that of the thrice usage of the free DiR. More importantly, the results also indicated that the accumulation of nanoparticles in the liver and spleen was significantly reduced. Hence, Lecithins-Zein nanoparticles are a promising strategy to enhance the drug concentration, prolong efficacy and reduce systemic toxicity in the topical administration for antifungal treatment.

Progressing Towards the Sustainable Development of Cream Formulations

This work aims at providing the assumptions to assist the sustainable development of cream formulations. Specifically, it envisions to rationalize and predict the effect of formulation and process variability on a 1% hydrocortisone cream quality profile, interplaying microstructure properties with product performance and stability. This tripartite analysis was supported by a Quality by Design approach, considering a three-factor, three-level Box-Behnken design. Critical material attributes and process parameters were identified from a failure mode, effects, and criticality analysis. The impact of glycerol monostearate amount, isopropyl myristate amount, and homogenization rate on relevant quality attributes was estimated crosswise. The significant variability in product droplet size, viscosity, thixotropic behavior, and viscoelastic properties demonstrated a noteworthy influence on hydrocortisone release profile (112 ± 2–196 ± 7 μg/cm²/√h) and permeation behavior (0.16 ± 0.03–0.97 ± 0.08 μg/cm²/h), and on the assay, instability index and creaming rate, with values ranging from 81.9 to 120.5%, 0.031 ± 0.012 to 0.28 ± 0.13 and from 0.009 ± 0.000 to 0.38 ± 0.07 μm/s, respectively. The release patterns were not straightforwardly correlated with the permeation behavior. Monitoring the microstructural parameters, through the balanced adjustment of formulation and process variables, is herein highlighted as the key enabler to predict cream performance and stability. Finally, based on quality targets and response constraints, optimal working conditions were successfully attained through the establishment of a design space.

QbD-driven development of intranasal lipid nanoparticles for depression treatment

Depression is a life-threatening psychiatric disorder and a multifactorial global public health concern. Current pharmacological treatments present limited efficacy, and are associated with several harmful side effects and development of pharmacoresistance mechanisms. Developing more effective therapeutic options is therefore a priority. This work aims at efficiently designing an antidepressant therapeutic surrogate relying on a dual strategy supported on lipid nanoparticles and intranasal delivery. For that purpose, the formulation was comprehensively optimized following a quality by design perspective. Critical quality attributes (CQAs) ranged from physicochemical to intranasal performance features. The optimized formulation was administered to mice in order to assess the antidepressive and anxiolytic effects by applying the forced swimming and marble-burying tests, respectively. A cross-analysis of the predictive models established for the set of 12 CQAs elicited the formulation containing similar proportion of solid and liquid lipids and lower surfactant concentration as the optimal one. Despite increasing the liquid lipid amount yielded smaller and more homogeneous particle size, and higher release rate, nanostructured lipid carriers (NLCs) provided an earlier and superior pig nasal mucosa permeability than nanoemulsions, along with better stability and cytotoxic profiles. Importantly, the intranasal delivery of the optimal lipid nanoparticle formulation reduced both depressive and anxiety-like behaviors, which positions these intranasal nanosystems in line with the hypothesis of provisioning timely and better acting antidepressant therapies.

Potential application of novel liquid crystal nanoparticles of isostearyl glyceryl ether for transdermal delivery of 4-biphenyl acetic acid

Novel liquid crystal nanoparticles (LCNs) composed of isostearyl glyceryl ether (GE-IS) and ethoxylated hydrogenated castor oil (HCO-60) were developed for the enhanced transdermal delivery of 4-biphenyl acetic acid (BAA). The physical properties and pharmaceutical properties of the LCNs were measured. The interaction between the intercellular lipid model of the stratum corneum and the LCNs was observed to elucidate the skin permeation mechanism. In the formulation, the LCNs form niosomes with mean particles sizes of 180-300 nm. The skin absorption mechanisms of LCNs are different, depending upon the application and buffer concentration. The LCNs composed of GE-IS and HCO-60 are attractive tools for use as transdermal drug delivery systems carriers for medicines and cosmetics, due to their high efficiency and safety.

Inhalable liposomal powder formulations for co-delivery of synergistic ciprofloxacin and colistin against multi-drug resistant gram-negative lung infections

The aim of this study was to design and characterize dry powder inhaler formulations of ciprofloxacin and colistin co-loaded liposomes prepared by the ultrasonic spray-freeze-drying (USFD) technique. Liposomal formulations and powder production parameters were optimized to achieve optimal characteristics and in-vitro performance such as encapsulation efficiency (EE), particle size, particle distribution index (PDI), fine particle fraction (FPF), emitted dose (ED) and in vitro antibacterial activity. The formulation (F6) with the mannitol (5% w/v) as the internal lyoprotectant and sucrose (5%, w/v), mannitol (10%, w/v) and leucine (5%, w/w) as the external lyoprotectants/aerosolization enhancers showed an optimal rehydrated EE values of ciprofloxacin and colistin (44.9 ± 0.9% and 47.0 ± 0.6%, respectively) as well as satisfactory aerosol performance (FPF: 45.8 ± 2.2% and 43.6 ± 1.6%, respectively; ED: 97.0 ± 0.5% and 95.0 ± 0.6%, respectively). For the blank liposomes, there was almost no inhibitory effect on the cell proliferation in human lung epithelial A549 cells, showing that the lipid materials used in the liposome formulation is safe for use in pulmonary drug delivery. The cytotoxicity study demonstrated that the optimized liposomal formulation (F6) was not cytotoxic at least at the drug concentrations of colistin 5 μg/mL and ciprofloxacin 20 μg/mL. Colistin (2 mg/L) monotherapy showed no antibacterial effect against P. aeruginosa H131300444 and H133880624. Ciprofloxacin (8 mg/L) monotherapy showed moderate bacterial killing for both clinical isolates; however, regrowth was observed in 6 h for P. aeruginosa H133880624. The liposomal formulation displayed superior antibacterial activity against clinical isolates of Pseudomonas aeruginosa H131300444 and P. aeruginosa H133880624 compared to each antibiotic per se. These results demonstrate that the liposomal powder formulation prepared by USFD could potentially be a pulmonary delivery system for antibiotic combination to treat multi-drug resistant Gram-negative lung infections.

A NAG-Guided Nano-Delivery System for Redox- and pH-Triggered Intracellularly Sequential Drug Release in Cancer Cells

Aim

Sequential treatment with paclitaxel (PTXL) and gemcitabine (GEM) is considered clinically beneficial for non-small-cell lung cancer. This study aimed to investigate the effectiveness of a nano-system capable of sequential release of PTXL and GEM within cancer cells.

Methods

PTXL-ss-poly(6-O-methacryloyl-d-galactopyranose)-GEM (PTXL-ss-PMAGP-GEM) was designed by conjugating PMAGP with PTXL via disulfide bonds (-ss-), while GEM via succinic anhydride (PTXL:GEM=1:3). An amphiphilic block copolymer N-acetyl-d-glucosamine(NAG)-poly(styrene-alt-maleic anhydride)₅₈-b-polystyrene₁₃₀ acted as a targeting moiety and emulsifier in formation of nanostructures (NLCs).

Results

The PTXL-ss-PMAGP-GEM/NAG NLCs (119.6 nm) provided a sequential in vitro release of, first PTXL (redox-triggered), then GEM (pH-triggered). The redox- and pH-sensitive NLCs readily distributed homogenously in the cytoplasm. NAG augmented the uptake of NLCs by the cancer cells and tumor accumulation. PTXL-ss-PMAGP-GEM/NAG NLCs exhibited synergistic cytotoxicity in vitro and strongest antitumor effects in tumor-bearing mice compared to NLCs lacking pH/redox sensitivities or free drug combination.

Conclusion

This study demonstrated the abilities of PTXL-ss-PMAGP-GEM/NAG NLCs to achieve synergistic antitumor effect by targeted intracellularly sequential drug release.

Formulation, in-vitro and in-vivo pharmacokinetic evaluation of simvastatin nanostructured lipid carrier loaded transdermal drug delivery system

Background

A simvastatin nanostructured lipid carrier loaded transdermal patch was developed to enhance the bioavailability and therapeutic effect.

Methods

Simvastatin NLC preparation was prepared by optimized hot homogenization technique and were characterized by particle size in nanometer, polydispersity index, zeta potential in millivolt, scanning electron microscopy, and entrapment efficiency by applying Box Behnken design utilizing multiple linear regression method.

Results

Chosen optimized NLC F7 formulation has particle size of 125.4 ± 2.66 nm, zeta potential of − 33.6 ± 2.42 mV, and PI of 0.480 ± 0.24. The NLC was loaded in transdermal patch by solvent evaporation method and evaluated for physical characteristics, drug content, skin permeation studies, and in-vivo pharmacokinetic studies in male albino Wistar rat. In-vivo pharmacokinetic studies in NLC loaded transdermal patch show an increase in AUC0-α in mg/ml when compared to marketed oral dosage form, which confirms the enhancement of bioavailability of simvastatin by NLC loaded transdermal patch.

Conclusions

From the data, it was concluded that drug-loaded NLC transdermal patch will be a promising drug delivery system for poorly bioavailable drugs.

Development of Betamethasone Dipropionate-Loaded Nanostructured Lipid Carriers for Topical and Transdermal Delivery

Introduction

Betamethasone dipropionate is a highly effective corticosteroid anti-inflammatory. However, the main drawback of its topical use is the limited skin penetration into deeper skin layers. Also, its systemic use has shown many side effects.

Objective

The goal of this research was to formulate betamethasone dipropionate in nanostructured lipid carriers (NLC) formulae that contain oleic acid to aid its penetration to deeper skin layers and to aid absorption to local regions upon topical application.

Methods

NLC formulae were prepared by high shear homogenization then sonication. Formulae were characterized for their particle size, size distribution, electric potential, occlusion factor, entrapment efficiency, drug loading, transmission electron microscopy, in vitro drug release, and ex vivo skin penetration. Compatibility of ingredients with drug was tested using differential scanning calorimetry. Formulae were shown to have appropriate characteristics. NLC formulae were superior to traditional topical formulation in drug release.

Results

Upon testing ex vivo skin penetration, betamethasone dipropionate prepared in NLC formulae was shown to penetrate more efficiently into skin layers than when formulated as a traditional cream. NLC formulation that contained higher percentage of oleic acid showed higher penetration and higher amount of drug to pass through skin.

Conclusion

In general, NLC with lower oleic acid percentage was shown to deliver betamethasone dipropionate more efficiently into deeper skin layers while that of a higher oleic acid percentage was shown to deliver the drug more efficiently into deeper skin layers and through the skin, transdermally.

Hybrid Nanostructured Films for Topical Administration of Simvastatin as Coadjuvant Treatment of Melanoma

This work aims at (1) assessing the potential of repurposing simvastatin (SV) to support the most common therapies against melanoma and (2) developing an innovative topical adhesive film, composed by chitosan-coated nanostructured lipid carriers (Ch-NLC) used as drug vehicle. A factorial design approach was employed as the basis for the formulation development. Optimized Ch-NLC displayed a particle size of 108 ± 1 nm, a polydispersity index of 0.226, a zeta potential of 17.0 ± 0.6 mV, as well as an entrapment efficiency of 99.86 ± 0.08%, and SV loading of 14.99 ± 0.01%. The performance of SV-Ch-NLC films was assessed in terms of release, permeation, and adhesion, as critical quality attributes. Cutaneous tolerability and in vitro cytotoxicity studies were performed to warrant film safety and drug effectiveness, respectively. The topical films provided a sustained release kinetic profile of SV and were classified as nonirritant systems. The encapsulation of SV increased cytotoxicity in melanoma cells. The key role of squalene as nanostructuring agent of the lipid nanoparticle matrix and as permeation enhancer was highlighted, suggesting its key action for potentiating skin permeation and uptake into melanoma cells. Topical SV-Ch-NLC films are thus able to provide an in situ extended drug delivery and useful as coadjuvant treatment of melanoma skin lesions.

Transdermal Delivery of Antipsychotics: Rationale and Current Status

The aim of this article is to provide the rationale for the development of transdermal formulations of antipsychotics by highlighting their main advantages, starting with an overview of the antipsychotic formulations that are currently available on the market. Progress regarding transdermal antipsychotic formulations was investigated by performing a search of papers, patents and clinical trials published in the last 10 years. Available data on antipsychotic transdermal formulations are reported and discussed, focusing on the characteristics of the dosage forms and their ability to promote drug absorption. Despite the current availability of a large number of antipsychotics, only a few of these drugs (e.g. aripiprazole, asenapine, blonanserin, chlorpromazine, haloperidol, olanzapine, prochlorperazine, quetiapine, and risperidone) have been developed as transdermal delivery systems. Several papers and patents show that transdermal formulations, such as creams, films, gels, nanosystems, patches, solutions, and sprays, have been evaluated with the aim of expanding the clinical utility of antipsychotic drugs. In particular, the employment of different strategies, such as the use of nanoparticles/vesicles, or permeation enhancers as well as microneedles with iontophoresis, may improve the absorption of antipsychotic drugs through the skin. However, few clinical trials on transdermal delivery of antipsychotic drugs are available and only delivery systems containing asenapine and blonanserin have shown interesting clinical results in terms of pharmacokinetic data, efficacy, and tolerability. Recently, the transdermal patch formulation of blonanserin was approved in Japan for the treatment of schizophrenia.

Synergistic combination therapy of lung cancer: Cetuximab functionalized nanostructured lipid carriers for the co-delivery of paclitaxel and 5-Demethylnobiletin

Lung cancer remains the leading cause of cancer associated deaths worldwide. Recent efforts have been focused on combinational and nanoparticulate therapies that can efficiently deliver multiple therapeutics. Herein, we reported cetuximab (CET) functionalized, paclitaxel (PTX) and 5-Demethylnobiletin (DMN) co-loaded nanostructured lipid carriers (NLCs) (CET-PTX/DMN-NLCs). The morphology, particle size, zeta potential, stability and drug release were tested. Cellular uptake, cell viability, synergistic effects and in vivo anti-tumor effects were evaluated on human lung adenocarcinoma cells (A549 cells), human embryonic lung cells (MRC-5 cells) and A549 paclitaxel-resistant cells bearing mice models. NLCs had sizes of around 130 nm and zeta potentials of +20-30 mV. The release of drugs from NLCs was relatively fast at the first 12 h and then became slow until completion of sustained release behavior. Cells uptake of CET-PTX/DMN-NLCs (65.8%) was remarkably higher than that of PTX/DMN-NLCs (35.5%) in A549 cells. The combination treatment with PTX and DMN synergistically decreases the viability of cells than the single PTX-NLCs and DMN-NLCs. CET-PTX/DMN-NLCs exhibited the most remarkable in vivo tumor inhibition efficiency, which suspended the tumor growth from 1010.23 to 211.18 mm³ at the end of the study. The highest tumor accumulation amount and low toxicity made CET-PTX/DMN-NLCs a promising system for the synergistic combination therapy of lung cancer.

Nanostructuring lipid carriers using Ridolfia segetum (L.) Moris essential oil

The therapeutic potential of essential oils is widely recognized since antiquity, due to their antibacterial, antifungal, anti-inflammatory and immuno-modulatory properties. In particular, their physicochemical characteristics, such as lipophilicity and permeation enhancement effect have sparked attention for the development of innovative lipid nanosystems. The present work aimed at developing a differentiated nanostructured lipid carrier (NLC) based formulation for topical application, using the Ridolfia segetum essential oil (REO), isolated by hydrodistillation from this Portuguese aromatic plant, with a dual key function, as active and simultaneously nanostructuring component of the nanoparticles. The incorporation of the essential oil in the solid lipid matrix, followed by the respective hot high-pressure homogenization, led to particles with a size of 143 ± 5 nm, along with a polydispersity index of 0.21, a zeta potential of -16.3 ± 0.6 mV, encapsulation efficacy of ca. 100% and loading capacity of 1.4%. A comprehensive physicochemical characterization of the lipid nanosystem, including morphology, structural, thermal and accelerated stability analysis confirmed its nanostructured nature. REO-NLC was further jellified for designing an appropriate semisolid topical dosage form. In vitro release, permeation and skin retention studies evidenced a sustained release behaviour and a reservoir-like effect, suitable for a prolonged topical delivery. Cytotoxicity studies, performed in fibroblasts and keratinocytes, revealed the biocompatibility of the developed formulations. This work highlights the critical role of REO as a multiaddressable compound, both as active pharmaceutical ingredient and nanostructuring agent, able to tailor the permeation enhancement profile of nanoparticles towards topical delivery purposes and concomitantly presenting a safety profile for cosmetic and/or pharmaceutical purposes.

Process analytical technologies and injectable drug products: Is there a future?

Parametric release was the first subset of real time release testing (RTRT), applied to terminally sterilised injectable drug products. The objective was to offer the industry an alternative to the time and money consuming sterility testing, without compromising the sterility of the products. The rationale was that quality cannot be tested into products, instead it must be planned (the principle of quality by design, QbD). This can be implemented by setting appropriate in-process controls supported on process analytical technologies (PAT). Two of the most versatile and promising PAT tools are the near infrared spectroscopy (NIRS) and the Raman spectroscopy. However, their application to injectable drug product development and manufacturing has been scarce. This review has the objective to provide a framework for the practical implementation of the QbD approach to injectable formulations, including application of diverse risk assessment and factorial design tools. Finally, the actual application of PAT, namely NIRS and Raman spectroscopy, to injectable drug product analysis is addressed.