Heavy metal and phenol adsorptive properties of biochars from pyrolyzed switchgrass and woody biomass in correlation with surface properties

A complete review on the oxygen-containing functional groups of biochar: Formation mechanisms, detection methods, engineering, and applications

Biochar is a porous carbon material generated by the thermal treatment of biomass under anaerobic or anoxic conditions with wealthy Oxygen-containing functional groups (OCFGs). To date, OCFGs of biochar have been extensively studied for their significant utility in pollutant removal, catalysis, capacitive applications, etc. This review adopted a whole system philosophy and systematically summarizes up-to-date knowledge of formation, detection methods, engineering, and application for OCFGs. The formation mechanisms and detection methods of OCFGs, as well as the relationships between OCFGs and pyrolysis conditions (such as feedstocks, temperature, atmosphere, and heating rate), were discussed in detail. The review also summarized strategies and mechanisms for the oxidation of biochar to afford OCFGs, with the performances and mechanisms of OCFGs in the various application fields (environmental remediation, catalytic biorefinery, and electrode material) being highlighted. In the end, the future research direction of biochar OCFGs was put forward.

Enhancement of nutrient use efficiency with biochar and wood vinegar: A promising strategy for improving soil productivity

BACKGROUND

The co-application of biochar and wood vinegar has demonstrated the potential to enhance premium crop production. The present study reveals the effects of co-applying rice husk biochar and wood vinegar (both foliar and soil application) on soil properties and the growth of Chinese cabbage (Brassica chinensis L.) in a two-season pot experiment.

RESULTS

The soil pH, electrical conductivity and dissolved organic carbon contents in combination treatments of wood vinegar and biochar were increased more when wood vinegar was applied to soils rather than to leaves, and the parameters were observed to surpass those for chemical fertilizer treatments. The biomass of Chinese cabbage shoots was significantly increased by 60.8- and 27.3-fold in the combined treatments compared to the control when 1% wood vinegar was sprayed to the leaves (WF1) in 2022 and 2023, respectively. Higher contents of vitamin C, soluble protein and soluble sugar were also observed in the combined wood vinegar and biochar treatments compared to chemical fertilizer treatments and the control; for example, the vitamin C content of plant shoot in WF1 was 21.3 times that of the control. The yield and quality of plants were decreased across all treatments in 2023 compared to 2022 but the combination treatments still displayed superiority.

CONCLUSION

The co-application of wood vinegar and biochar enhances the growth and improve the quality of Chinese cabbage through improving the soil properties and plant photosynthesis. Moreover, the foliage application of wood vinegar is more preferable compared to soil application. © 2024 Society of Chemical Industry.

Understanding competitive Cu2+ and Zn2+ adsorption onto functionalized cellulose fiber via experimental and theoretical approach

Amidoxime groups were successfully introduced to develop a novel amidoxime-functionalized cellulose fiber (AO-Cell) for absorptive removal of heavy metal ions in wastewater. The chemical structure, and the competitive adsorption of Cu2+ and Zn2+ by AO-Cell were investigated by experiments study, Density functional theory (DFT) and molecular dynamic (MD) simulation. The results showed the N and O atoms in the amidoxime group can spontaneously interact with Cu2+ and Zn2+ through sharing long pair electrons to generate stable coordination structure, which was the dominant adsorption mechanism. Besides, the enlarged surface area, improved hydrophilicity and dispersion offered by AO-Cell facilitate the adsorption process by increasing the accessibility of absorption sites. As results of these synergetic modification, AO-Cell can remain effective in a wide pH range (1-6) and reach adsorption equilibrium within 60 min. At optimal conditions, the achieved theoretical adsorption capacity is as high as 84.81 mg/g for Cu2+ and 61.46 mg/g for Zn2+ in the solution with multiple ions. The competition between Cu2+ and Zn2+ in occupying the absorption sites arises from the difference in the metallic ion affinity and covalent index with the adsorbent as demonstrated by the MD analysis. Importantly, AO-Cell demonstrated favorable recyclability after up to 10 adsorption-desorption cycles.

Impact of pyrolysis process conditions on the structure of biochar obtained from apple waste

Biochar is an eco-friendly carbon material whose properties allow it to be used as a sorbent for wastewater treatment or soil remediation. The paper presents the results of research related to the pyrolysis process of apple waste after supercritical CO2 extraction with the simultaneous use of physical activation. The research assessed the influence of the temperature of the pyrolysis process and steam activation on the structural properties of the obtained biochar, i.e. specific surface, porous structure, and presence of functional groups. The results obtained confirmed that lower temperature pyrolysis produces biochar characterised by the presence of functional groups and ordered structure. On the other hand, high temperature pyrolysis with simultaneous steam activation determines microporosity and high values of the specific surface area. Taking into consideration pollutant sorption mechanisms (physical and chemical sorption), the obtained biochar materials can be used as sorbents in water and wastewater treatment.

Magnetic biochar enhanced copper immobilization in agricultural lands: Insights from adsorption precipitation and redox

Biochar has exceeded expectations for heavy metal immobilization and has been prepared from widely available sources and inexpensive materials. In this research, coconut shell biochar (CSB), bamboo biochar (BC), magnetic coconut shell charcoal (MCSB), and magnetic bamboo biochar (MBC) were manufactured via co-pyrolysis, and their adsorption properties were tested. The pseudo-secondary (R2 = 0.980-0.985) adsorption kinetic fittings for the four biochas were superior to the pseudo-primary kinetics (R2 = 0.969-0.982). Unmodified biochar adsorption isotherms were more consistent with the Freundlich model, while magnetic biochar fitted Langmuir models better. The maximum adsorption capacity of MCSB for Cu(Ⅱ) reached 371.50 mg g-1. The adsorption mechanisms quantitatively analysis of the biochar indicated that chemical precipitation and ion exchange contributed to the adsorption, in which the magnetic biochar metal-π complexation also enhanced the adsorption. The pot experiment revealed that MCSB (2.0 %DW) significantly enhanced the biomass of lettuce, and facilitated the immobilization of DTPA-Cu (p < 0.05). SEM-EDS, XPS, and FTIR were utilized for morphological characterization and functional group identification, and the increased active adsorption sites (-OH, -COOH, CO, and Fe-O) of MCSB enhanced chemisorption and π-π EDA complexation with Cu(Ⅱ). EEM-PARAFAC and RDA analysis further elucidated that magnetic biochar immobilized copper and reduced biotoxicity (efficiency: 76.12%) by adjusting soil pH, phosphate, and SOM release (negative correlation). The presence of iron oxides (FeOx) promoted in situ adsorption of metallic copper and offered new insights into soil remediation.

Valorization of Olive Leaf Polyphenols by Green Extraction and Selective Adsorption on Biochar Derived from Grapevine Pruning Residues

Given today's increasingly intensive agriculture, one key problem area considers the valorization and reuse of wastes from food and agricultural production with minimal impact on the environment. Due to its physicochemical characteristics, biochar (BC) derived from grapevine pruning residue has shown considerable potential for use as an adsorbent. High-value phytochemicals found in abundance in the olive leaf (OL) can be employed in many different industrial sectors. The potential application of BC in the removal of specific polyphenolic components from OL extracts has been investigated in the present study. Water, as the most available and greenest of solvents, was investigated as to its use in the extraction of polyphenols, which was carried out by comparing maceration, ultrasound-assisted extraction, and microwave-assisted extraction, considering different temperatures and solid-to-liquid (s/l) ratios. The BC adsorption capacity of selected polyphenols was fitted with both the Langmuir and Freundlich isotherm models. The Freundlich model fitted better relative to OL polyphenols adsorption. Oleuropein was the most abundant compound identified in the extracts, obtaining the highest Kf value (20.4 (mg/g) × (L/g)n) and R2 coefficient (0.9715) in the adsorption on the biochar's surface. The optimum conditions in the dosage experiment suggest the use of 0.5 g of BC using 3 g/L extracts, with an exception for oleuropein and hydroxytyrosol, for which the highest biochar dose (2.5 g) performed better. Considering the compounds' concentrations and the BC dose, BC from grapevine pruning residues demonstrated a potential use in the uptake of specific polyphenols from olive leaves, making it a promising adsorbent for such applications.

From Waste to Green: Water-Based Extraction of Polyphenols from Onion Peel and Their Adsorption on Biochar from Grapevine Pruning Residues

Onion peels (OP) are rich in bioactive compounds with a plethora of benefits for human health, but this valuable material is often wasted and underutilized due to its inedibility. Likewise, grapevine pruning residues are commonly treated as agricultural waste, but biochar (BC) obtained from this material has favorable characteristics as an adsorbent. This study investigated the potential of BC in removal of targeted polyphenolic compounds from OP extracts. The OP extracts were obtained adhering to green chemistry principles using deionized water amplified by three methods: maceration (MAC), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). The extraction efficiency on the polyphenolic profile and antioxidant capacity was investigated with different extraction temperatures and solid-to-liquid (s/l) ratios. For further analysis, UAE at 90 °C with an s/l ratio of 1:100 was used due to higher polyphenolic compound yield. The BC adsorption capacity of individual polyphenols was fitted with the Langmuir and Freundlich isotherm models. Quercetin-3,4'-diglucoside obtained the highest R2 coefficient in both models, and the highest qmax value. The optimum conditions in the dosage experiment suggested an amount of 0.5 g of BC using 3 g/L extracts. The studied BC showed a high affinity for targeted phytochemicals from OP extracts, indicating its potential to be applied for the green adsorption of valuable polyphenolic compounds.

Mechanistic understanding of perfluorooctane sulfonate (PFOS) sorption by biochars

Biochar has recently emerged as a cost-effective solution to combat per- and polyfluoroalkyl substances (PFAS) pollution in water, but mechanistic understanding of which physicochemical properties of biochars dictate PFAS sorptive removal from water remains elusive. Herein, 15 biochars were pyrolyzed from five feedstocks (corn, Douglas fir, eucalyptus, poplar, and switchgrass) at three pyrolysis temperatures (500, 700, and 900 °C) to investigate their removal efficiencies and mechanisms of perfluorooctane sulfonate (PFOS) from water. A commercial biochar was also included for comparison. Biochar physiochemical properties, including elemental composition, pH, specific surface area (SSA), pore structure, hydrophobicity, surface charge, surface functional groups, and crystalline structure were systematically characterized. Batch sorption data showed that the Douglas fir 900 biochar (Douglas fir and 900 are the feedstock type and pyrolysis temperature, respectively; this naming rule applies to other biochars), poplar 900 biochar, and commercial biochar can remove over 95% of PFOS from water. Structural equation model (SEM) was used to elucidate which biochar properties affect PFOS sorption. Interestingly, biochar pore diameter was identified as the most critical factor controlling PFOS removal, but pore diameter/pore volume ratio, SSA, pyrolysis temperature, hydrophobicity, and elemental composition all played variable roles. Hypothetically, biochars with small pore diameters and large pore volumes had a narrow yet deep pore structure that traps PFOS molecules inside once already sorbed, resulting in an enhanced PFOS sorption. Biochars with small pore diameter, low nitrogen content, and high pyrolysis temperature were also favorable for enhanced PFOS sorption. Our findings advance the knowledge of using biochars with optimized properties to remove PFOS and possibly other similar PFAS compounds from water.

Effects of modification and co-aging with soils on Cd(II) adsorption behaviors and quantitative mechanisms by biochar

In this study, original and two KMnO₄-modified rice straw biochars (pre- and postmodification) were prepared, which were all pyrolysed at 400 °C. Premodified biochar had the largest Cd adsorption capacity, strongest acid and solute buffering capacity, which benefited from the increase of carbonate content, specific surface area, and the emergence of Mn(II) and MnO_x through modification. Original and premodified biochars were then conducted four types of aging process by an improved three-layer mesh method, namely, aging without soil and co-aging with acid (pH = 5.00), neutral (pH = 7.00), and alkaline (pH = 8.30) soils. The adsorption capacities of modified biochar were always larger than those of original biochar after aging processes. After four aging processes, Cd(II) adsorption capacities were basically in the order of aged biochar without soil > biochar co-aged with alkaline soil > biochar co-aged with neutral soil > biochar co-aged with acid soil, and KMnO₄-modified biochar was always better than original biochar after co-aging with soils. The dominant adsorption mechanism of original and premodified biochars (fresh and aged) for Cd(II) was all the precipitation and adsorption with minerals (accounted for 58.55 ~ 85.55%). In this study, we highlighted that biochar remediation for Cd should be evaluated by co-aging with soil instead of aging without soil participation.

Ketoprofen and aspirin removal by laccase immobilized on date stones

In recent years, enzymatic remediation/biocatalysis has gained prominence for the bioremediation of recalcitrant chemicals. Laccase is one of the commonly investigated enzymes for bioremediation applications. There is a growing interest in immobilizing this enzyme onto adsorbents for achieving high pollutant removal through simultaneous adsorption and biodegradation. Due to the influence of the biomolecule-support interface on laccase activity and stability, it is crucial to functionalize the solid carrier prior to immobilization. Date stone (PDS), as an eco-friendly, low-cost, and effective natural adsorbent, was utilized as a carrier for laccase (fungus Trametes versicolor). After activating PDS through chemical treatments, the surface area increased by thirty-six-fold, and carbonyl groups became more prominent. Batch experiments were carried out for ketoprofen and aspirin biodegradation in aqueous solutions. After six cycles, the laccase maintained 54% of its original activity confirmed by oxidation tests of 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). In addition, the storage, pH, and thermal stability of immobilized laccase on functionalized date stone (LFPDS) were found to be superior to that of free laccase, demonstrating its potential for ongoing applications. In the aqueous batch mode, this immobilized laccase system was used to degrade 25 mg L-1 of ketoprofen and aspirin, resulting in almost complete removal within 4 h of treatment. This study reveals that agricultural wastes such as date stone can successfully be valorized through simple activation techniques, and the final product can be used as an adsorbent and substrate for immobilization enzyme. The high efficiency of the LFPDS in removing ketoprofen and aspirin highlights the potential of this technology for removing pharmaceuticals and merits its continued development.

Considerations for evaluating innovative stormwater treatment media for removal of dissolved contaminants of concern with focus on biochar

Stormwater from complex land uses is an important contributor of contaminants of concern (COCs) such as polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), Copper, and Zinc to receiving water bodies. A large portion of these COCs bind to particulate matter in stormwater, which can be removed through filtration by traditional media. However, the remaining dissolved COCs can be significant and require special attention such as engineered treatment measures and media. Biochar is a porous sorbent produced from a variety of organic materials. In the last decade biochar has been gaining attention as a stormwater treatment medium due to low cost compared to activated carbon. However, biochar is not a uniform product and selection of an appropriate biochar for the removal of specific contaminants can be a complex process. Biochars are synthesized from various feedstocks and using different manufacturing approaches, including pyrolysis temperature, impact the biochar properties thus affecting ability to remove stormwater contaminants. The local availability of specific biochar products is another important consideration. An evaluation of proposed stormwater control measure (SCM) media needs to consider the dynamic conditions associated with stormwater and its management, but the passive requirements of the SCM. The media should be able to mitigate flood risks, remove targeted COCs under high flow SCM conditions, and address practical considerations like cost, sourcing, and construction and maintenance. This paper outlines a process for selecting promising candidates for SCM media and evaluating their performance through laboratory tests and field deployment with special attention to unique stormwater considerations.

Adsorptive removal of Ag/Au quantum dots onto covalent organic frameworks@magnetic zeolite@arabic gum hydrogel and their catalytic microwave-Fenton oxidative degradation of Rifampicin antibiotic

Recent progress in nanotechnology via incorporation of small particle size as quantum dots (QDs) (1-10 nm) in many industrial activities and commercial products has led to significant undesired environmental impacts. Therefore, QDs removal from wastewater represents an interesting research topic with a lot of challenges for scientists and engineers nowadays. In this work, the coagulative removal of metal quantum dots as silver and gold from industrial water samples is explored. A novel biosorbent was assembled via binding of covalent organic frameworks (COFs) with magnetic zeolite and Arabic gum hydrogel (COFs@MagZ@AGH) as a promising removal material for Ag-QDs and Au-QDs. This was fully characterized by EDX, SEM, TEM, FT-IR, XPS, XRD and surface area and applied in coagulative removal of Au-QDs and Ag-QDs in presence of several experimental factors as pH, presence of other electrolytes, stirring time, initial QDs concentration, coagulant dosage, and temperature in order to optimize the removal processes. At optimum conditions, COFs@MagZ@AGH was able to recover 99.19% and 87.57% of Ag-QDs and Au-QDs QDs, respectively via chemical adsorption mechanism with perfect fitting to pseudo-second order model. Reuse of the recovered Ag/Au-QDs@COFs@MagZ@AGH as efficient catalysts in catalytic degradation of Rifampicin antibiotic (Rf) from water was additionally investigated and optimized via microwave-Fenton catalysts with excellent oxidative degradation efficiency (100%). Reusability and applicability of the biosorbent (COFs@MagZ@AGH) and catalysts (Ag/Au-QDs@COFs@MagZ@AGH) in real industrial water samples were also explored and successfully accomplished.

Application of biochar for minewater remediation: Effect of scaling up production on performance under laboratory and field conditions

Metals discharged from abandoned mines are a major source of pollution in many parts of the world. As a result, there is a growing need for suitable low-cost remediation methods. While a large literature base exists demonstrating the efficacy of biochar to remove metals from solution, most studies are confined to the laboratory. This study examines the effects on the biochar quality when scaling up production from laboratory to pilot scale. Pilot scale biochars were produced using a 600 kg batch pyrolysis reactor, these chars were then deployed in the field using a series of 100 mm × 1200 mm cylindrical treatment cells installed at the point of discharge from an abandoned mine site. Most biochars produced at a pilot removed more zinc under laboratory conditions, however all of the biochars showed a reduced performance when tested in the field, this ranged from a 14% to an 85% reduction depending on the biochar.

Adsorption of p-benzoquinone at low concentrations from aqueous media using biosolid-based activated carbon

The toxic oxidation intermediate p-benzoquinone exists in aqueous environments at dilute concentrations above the fish-toxicity limit of 0.045 mg/L, affecting aquatic life. The reduction of this compound to the concentrations required to achieve safe discharge limits is challenging. In this study, the adsorptive removal of p-benzoquinone by a biosolid-based activated carbon (SBAC) was systematically investigated in batch experiments. The adsorption rate was rapid, and the bulk of p-benzoquinone adsorption occurred within 30 min. The maximum adsorption capacity of SBAC was estimated at 19.6 mg/g using the Langmuir isotherm model. Its adsorptivity was independent of temperature from 6 to 40 °C. The presence of 6 g/L of chloride and 500 mg/L of sulphate did not affect the removal of 1 mg/L p-benzoquinone, whereas 15 mg/L of humic acid media slightly decreased the p-benzoquinone removal from 87.0% to 83.2%. Diffusion, hydrophilic, and electrostatic interactions (i.e., dipole-dipole) govern the adsorption of p-benzoquinone and are influenced by the SBAC surface chemistry. Biosolid-based activated carbon can lower the residual p-benzoquinone to below the fish-toxicity limit of 0.045 mg/L within 1 h of sequential adsorption. Thus, biosolid-based activated carbon can effectively remove p-benzoquinone from aqueous environments; this is a waste-to-resource approach that addresses sustainability (waste disposal) and environmental protection (pollutant removal).

Use of Eggshell-Catalyzed Biochar Adsorbents for Pb Removal from Aqueous Solution

Eggshell is a cheap and environmentally friendly calcium source. In this study, Ca-modified biochar adsorbents (CEA) were prepared by 1:10, 1:2, and 1:1 mass ratio of the eggshell and Eupatorium adenophorum. The CEA-2 sample prepared with a 1:2 mass ratio showed a maximum Pb adsorption capacity (97.74 mg·g^-1) at the conditions of an initial pH of 7.0, an adsorbent dosage of 0.5 g·L^-1, and a contact time of 8.0 h. The kinetic and isotherm studies indicated that the adsorption process of the CEA-2 sample had monolayer adsorption characteristics, which was controlled together by intraparticle and interface diffusion. Thermodynamic studies indicated that the adsorption process of CEA-2 was spontaneous (ΔG ⁰ <0) and endothermic (ΔH ⁰ > 0). X-ray diffraction and scanning electron microscopy analyses showed a uniform distribution of Ca-Pb precipitation on the CEA-2 surface, which proved that chemical precipitation was the main adsorption mechanism. Fourier transform infrared spectra found that CEA-2 had abundant active groups, especially nitrogen-containing functional groups, which could adsorb Pb through a surface complexation reaction. The Brunauer-Emmett-Teller surface area of CEA-2 was found to be 621 m²·g^-1, and such developed pores could ensure the smooth diffusion of Pb. Finally, the effect of coexisting cation and anion experiment and the cyclic regeneration experiment indicated that CEA-2 had prominent stability and reusability for Pb adsorption.

Integration of biochar into Ag3PO4/α-Fe2O3 heterojunction for enhanced reactive oxygen species generation towards organic pollutants removal

A biochar (BC) harbored Ag₃PO₄/α-Fe₂O₃ type-Ⅰ heterojunction (Ag-Fe-BC) was prepared by a hydrothermal-impregnation method to transfer active center of heterojunctions. The electrochemical and spectroscopic tests demonstrated that BC enhanced the catalytic performance of the heterojunction by enhancing photocurrent, reducing fluorescence intensity, and facilitating separation of electron-hole pairs. The photocatalytic activity showed the Ag-Fe-BC (5:1:3) could degrade Rhodamine B (20 mg/L) by up to 92.7%, which was 3.35 times higher than Ag₃PO₄/α-Fe₂O₃. Tetracycline and ciprofloxacin (20 mg/L) were degraded efficiently by 58.3% and 79.4% within 2 h, respectively. Electron paramagnetic resonance and scavenging experiments confirmed the major reactive oxygen species (ROS) consisted of singlet oxygen (¹O₂) and superoxide (·O₂^-). Excellent RhB adsorption and electrons capturing capacity of BC facilitated electron-hole pairs separation and ROS transferring to target organics followed by elevated degradation. Thus, a facile method was proposed to synthesize a highly efficient visible-light responsive photocatalyst for degradation of various organics in water.

Biochar mediated uranium immobilization in magnetite rich Cu tailings subject to organic matter amendment and native plant colonization

Organic matter (OM) amendments and plant colonization can accelerate mineral weathering and soil formation in metal mine tailings for ecological rehabilitation. However, the weathering effects may dissolve uranium (U)-bearing minerals (e.g., ianthinite) and increase U dissolution in porewater and seepages. The present study aimed to characterize the U solubility and distribution among different fractions and investigate if biochar (BC) could decrease soluble U levels and facilitate U immobilization in the OM-amended and plant-colonized tailings. A native plant species, Red Flinders grass (Iseilema vaginiflorum) was cultivated in the tailings for four weeks, which were amended with sugarcane residue (SR) with or without BC addition. The results showed that OM amendment and plant colonization increased porewater U concentrations by almost 10 folds from ~ 0.2 mg L^-1 to > 2.0 mg L^-1. The BC addition decreased porewater U concentrations by 40%. Further micro-spectroscopic analysis revealed that U was immobilized through adsorption onto BC porous surfaces, via possibly complexing with oxygen-rich organic groups. Besides, the BC amendment facilitated U sequestration by secondary Fe minerals in the tailings. These findings provide important information about U biogeochemistry in Cu-tailings mediated by BC, OM and rhizosphere interactions for mitigating potential pollution risks of tailings rehabilitation.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

Lignocellulosic Based Biochar Adsorbents for the Removal of Fluoride and Arsenic from Aqueous Solution: Isotherm and Kinetic Modeling

Eucalyptus wood is made up of lignocellulosic material; this lignocellulosic material contains two types of biopolymers, i.e., carbohydrate and aromatic polymers. In this study, this lignocellulosic material was used to prepare biochar. Three biochar, i.e., laboratory-based (B1), barrel-based (B2), and brick kiln-biochar (B3), were used for fluoride and arsenic removal from aqueous solution. Barrel-based biochar was prepared by using the two-barrel method’s alteration. The highest fluoride removal (99%) was attained at pH 2 in the presence of B1, while in the presence of B2 and B3, maximum fluoride removal was 90% and 45.7%, respectively. At pH 10, the maximum arsenic removal in the presence of B1, B2, and B3 was 96%, 94%, and 93%, respectively. The surface characteristics obtained by Fourier-transform infrared spectroscopy (FTIR) showed the presence of carbonyl group (C-O), and alkene (C=C) functional groups on all the three studied biochars. Isotherm studies showed that the adsorption was monolayered (all the adsorbed molecules were in contact with the surface layer of the adsorbent) as the Langmuir isotherm model best fits the obtained data. Adsorption kinetics was also performed. The R² value supports the pseudo-second-order kinetics, which means that chemisorption was involved in adsorbing fluoride and arsenic. It is concluded that B1 gives maximum removal for both fluoride (99%) and arsenic (96%). The study shows that lignocellulose-based biochar can be used for arsenic and fluoride removal from water.

Optimizing magnetic functionalization conditions for efficient preparation of magnetic biochar and adsorption of Pb(II) from aqueous solution

Recoverable magnetic biochar has great potential for treating wastewater contaminants such as Pb(II). However, whether magnetic modification could enhance metal adsorption efficiency is currently contradictory in the literature mainly due to the differences in selecting various magnetic functionalization conditions. Considering this gap in knowledge, the effects of magnetic functionalization method (impregnation and precipitation), concentration of precursor iron solution (0.01-1 M), and pyrolysis temperature (300-700 °C) on the characteristics and Pb(II) adsorption capacity of biochar were systematically investigated in this paper. Results indicated that Fe₃O₄ was the main product for magnetic biochars synthesized using the impregnation (denoted as FWFe(3)) and precipitation methods (denoted as FWFe(2)). Magnetic functionalization resulted in remarkably increased pH and more negative zeta potential for FWFe(2) samples, whereas FWFe(3) samples showed the opposite trends. The adsorption of Pb(II) on different biochars fitted the pseudo-second order model and the Langmuir model. The maximum adsorption capacity was 817.64 mg/g for FWFe(2)1M700C (precipitation by 1 M of Fe(II)/Fe(III), pyrolysis at 700 °C), outperforming FWFe(3) and pristine biochar samples by around 5-13 times. Mechanism study indicated that the adsorption mainly involved electrostatic attraction, ion exchange, co-precipitation, and complexation. Pb(II) adsorption capacity was strongly dependent on the alkali pH of biochar. However, this efficiency was less affected by biochar surface area and its morphology. The higher pH of FWFe(2) samples not only led to an increased surface charge for stronger electrostatic attraction and ion exchange but also favored the formation of co-precipitates. By contrast, FWFe(3) samples showed a decreased adsorption capacity for Pb(II) with increased concentration of embedded iron. Overall, magnetic biochar, prepared using precipitation followed by high-temperature pyrolysis (such as, FWFe(2)1M700C), can be a promising adsorbent for Pb(II) adsorption from wastewater.

Adsorption behavior of silver quantum dots by a novel super magnetic CoFe2O4-biochar-polymeric nanocomposite

Recent industrial development and research progress in nanotechnology have led to the release of a number of nanomaterials with particle sizes (1-10 nm) which are categorized as quantum dots (QDs) in aquatic system. Disposal away of such QDs will cause potential pollution to the environment. Therefore, removal of disposed QDs from wastewater represents a challenging research subject for scientists and engineers. Hence, the objective of this study is devoted to assess the process of coagulative removal of silver quantum dots (Ag-QDs), as an example, from water by a novel super magnetic nanocomposite. Such material was aimed to prepare from the chemical combination and reaction of a generated Citrus sinensis and Citrus reticulata peels biochar (SMCsr-B) with spinel cobalt ferrite (CoFe₂O₄) as a super-magnetic source. The produced (SMCsr-B) was then crosslinked with polyurea-formaldehyde polymer (PUF) using EDA in only two minutes via microwave irradiation to produce (SMCsr-B/PUF). The SEM, EDX, FT-IR, XRD, and XPS analyses of the assembled (SMCsr-B/PUF) nanocomposite were acquired to confirm surface morphology and chemical structure. Controlling experimental factors were investigated as pH, time, and Ag-QDs pollutant concentration using microwave irradiative removal technique to establish the efficiency of coagulative adsorption of Ag-QDs onto (SMCsr-B/PUF). The solution (pH 5) was proved to exhibit the higher removal percentages of Ag-QDs in 15-25 s. SMCsr-B/PUF nanocomposite exhibited high removal efficiency as 93.12%, 92.39% and 92.48% upon using 20, 40 and 60 mg L^-1 of Ag-QDs, respectively in presence of 10 mM NaCl. The kinetic and equilibrium adsorption data were best fitted to Freundlich model. The prepared SMCsr-B/PUF was successfully utilized as an efficient super magnetic nanocomposite for removal and recovery of Ag-QDs from aqueous environment.

Pristine biochar performance investigation to remove metals in primary and secondary treated municipal wastewater for groundwater recharge application

In this study, pristine biochar derived from date palm at 500°C was used in batch reactors (simulating blending adsorbent in aeration tank) and fixed-bed columns (simulating holding adsorbent in fixed-bed reactors). The removal performance of the biochar was assessed toward single and mixed-metal solutions as well as synthetic primary and secondary treated wastewater for copper (Cu2+), iron (Fe2+), nickel (Ni2+) and zinc (Zn2+). The order of maximum adsorption capacities of the metal ions at pH 7 followed: Fe2+ (2.92/2.94 mg/g)>Cu2+(2.69/2.78 mg/g) >Zn2+(2.03/2.19 mg/g)>Ni2+(1.69/1.02 mg/g) in single/mixed-metal solutions and Zn2+(2.91/11.26 mg/g)>Fe2+(0.60/5.29 mg/g)>Cu2+(0.56/5.05 mg/g)>Ni2+(0.13/2.02 mg/g) in synthetic primary/secondary treated wastewater. Blending biochar in aeration tank reduced metal concentrations. The metal ion concentrations in the final effluent were below the World Health Organization drinking water limits (2, 0.3, 0.1 and 3 mg/L for Cu2+, Fe2+, Ni2+ and Zn2+, respectively) suggesting that treated secondary wastewater can be spread into potable aquifers following disinfection. The Freundlich and the Pseudo-second order models fit best the batch experimental data. Experimental data from column analysis fit well to the Thomas model. The adsorption of metal ions on the surface of biochar was confirmed by Scanning electron microscopy, Energy dispersive X-ray studies, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Desorption studies using different eluents demonstrated the reusability potential of the studied biochar.

Novel One-Pot Solvothermal Synthesis of High-Performance Copper Hexacyanoferrate for Cs+ Removal from Wastewater

Efficient removal of radioactive cesium from complex wastewater is a challenge. Unlike traditional precipitation and hydrothermal synthesis, a novel vast specific surface area adsorbent of copper hexacyanoferrates named EA-CuHCF was synthesized using a one-pot solvothermal method under the moderate ethanol media characterized by XRD, SEM, EDS, BET, and FTIR. It was found that the maximum adsorption capacity towards Cs+ was 452.5 mg/g, which is far higher than most of the reported Prussian blue analogues so far. Moreover, EA-CuHCF could effectively adsorb Cs+ at a wide pH range and low concentration of Cs+ in geothermal water within 30 minutes, and the removal rate of Cs+ was 92.1%. Finally, the separation factors between Cs+ and other competitive ions were higher than 553, and the distribution coefficient of Cs+ reached up to 2.343 × 104 mL/g. These properties suggest that EA-CuHCF synthesized by the solvothermal method has high capacity and selectivity and can be used as a candidate for Cs+ removal from wastewater.

Biochar porosity: a nature-based dependent parameter to deliver microorganisms to soils for land restoration

Literature shows that biochar can potentially retain nutrients in agricultural soils, avoiding significant nutrient losses. Furthermore, biochar porosity and functional groups have been shown to enhance physico-chemical properties of soil when amended, which in turn has the ability to encourage inhabitation of specific microorganisms as biofertilizers or to enhance soil remediation. It supports scale-dependent parameters and provides both ecosystem services and soil-vegetation solutions relevant to nature-based solutions. However, detailed researches on the mechanisms of soil microbial interactions with biochar porous properties are required, along with the microbial attachment factors, sustenance, and detachment when applied to soils. Recent valuable works have impregnated plant growth-promoting bacteria unto biochar and have observed inconsistent results. Firstly, biochar intrinsic properties alter the fate of impregnation by inhibiting quorum sensing signals, and the macropore requirements for adsorption and/or biofilm formation have not been well considered. Additionally, the nutrient and supplement requirements for each microorganism as well as the adsorption capacity have not been well understood for biochar surfaces. Substantial information is required to understand the mechanisms of microbe adsorption and factors that influence the process, as well as sustenance of the matrix even when deployed in soils. Research directions should focus on determining molecular and chemical mechanisms responsible for the biochar-microbe interaction process and fate of microbe on biochar while expressing plant growth-promoting properties, which needs to be done in laboratory and field trials. Graphical abstract.

Simultaneous adsorption of Cr(VI) and phenol by biochar-based iron oxide composites in water: Performance, kinetics and mechanism

The pollution of heavy metals and organic compounds has received increased attention in recent years. In the current study, a novel biochar-based iron oxide composite (FeYBC) was successfully synthesized using pomelo peel and ferric chloride solution through one-step process at moderate temperature. Results clearly demonstrate that FeYBC exhibited more efficient removal of Cr(VI) and/or phenol compared with the pristine biochar, and the maximum adsorption amounts of Cr(VI) and phenol by FeYBC could reach 24.37 and 39.32 mg g^-1, respectively. A series of characterization data suggests that several iron oxides such as Fe₂O₃, Fe⁰, FeOOH and Fe₃O₄ were formed on the FeYBC surface as well as oxygen-containing groups. Thermodynamics study indicates that Cr(VI) and phenol adsorption by FeYBC were endothermic and exothermic processes, respectively. Langmuir adsorption isotherm and pseudo-second order models could better explain the Cr(VI) and phenol adsorption behaviors over FeYBC. The Cr(VI) adsorption might be primarily achieved through the ion exchange and surface complexation and reduction, whereas the π-π interaction and electron donor-acceptor complex mainly contributed to phenol adsorption. The findings indicate that the biochar-based iron oxide composites material was an efficient adsorbent for the remediation of industrial effluents containing Cr(VI) and phenol.

Removal characteristics of heavy metal ions in rainwater runoff by bioretention cell modified with biochar

As a form of pollution source control and a low-impact development measure, bioretention is a convenient, economical, and effective method for the removal of heavy metals from stormwater runoff, which can adapt to the randomness and uncontrollability of non-point source pollution. However, few studies have assessed the performance of bioretention in the simultaneous removal of multiple heavy metals and the impact of heavy metal migration on the bioretention life cycle. In this study, the removal rates of various heavy metals: copper (Cu), zinc (Zn), lead (Pb), and cadmium (Cd), were enhanced using a biochar modified bioretention cell, as compared to the traditional sandy soil bioretention process. Following treatment with the biochar modified bioretention cell, the average concentrations of Cu, Zn, Pb, and Cd were 55%, 61%, 19.66%, and 36.43% lower than the traditional sandy soil bioretention effluent, respectively. These results show that biochar significantly improves the removal of heavy metals by the bioretention process, especially Cu and Zn. This study also evaluated the effect of biochar on the inhibition of heavy metal migration in the filler material, by sampling and analysing the filler and retained water at different filler depths, then repeating the filler leaching experiment after simulated rainfall. The content of heavy metals at a filler depth of 45 cm in the traditional sandy soil bioretention system, was significantly higher than in the biochar modified bioretention system, showing that biochar plays an important role in the inhibition of heavy metal migration.

Enhanced activation of ultrasonic pre-treated softwood biochar for efficient heavy metal removal from water

Physical and chemical modification on biochar is an interesting approach to enhance the properties and make them potential candidates in adsorption of heavy metals from water. Studies have shown that ultrasound treatments as well as alkali activations on biochar has positive impact on adsorption behaviour of the material. Base activation on biochar derived from ultrasound pre-treated woodchips were studied to understand the influence of ultrasound pre-treatment on chemical modification of biochar and the adsorption properties emerged from it. 40 and 170 kHz ultrasound pre-treated softwood woodchips were subjected to laboratory scale pyrolysis and the resulted biochars were treated with NaOH. The physicochemical properties were examined, and the adsorption experiments revealed that ultrasound pre-treatment assisted biochars have better adsorption capacity as compared to untreated biochar samples after activation. 170 kHz pre-treated sample exhibited an equilibrium adsorption capacity of 19.99 mg/g which is almost 22 times higher than that of corresponding non-activated sample. The ultrasound pre-treated samples showed improved competitive adsorption behaviour towards copper ions in comparison with nickel or lead. The overall study suggests that ultrasound pre-treated biochars combined with alkali activation enhances the heavy metal removal efficiency and these engineered biochars can be used as an effective adsorbent in the field of wastewater treatment.

Adsorption of copper (II) in aqueous solution using biochars derived from Ascophyllum nodosum seaweed

There has been growing research interest in exploiting biochar for cost-effective. removal of different pollutants. Heavy metals, especially copper II (Cu II) is highly toxic and nonbiodegradable pollutants, and has been major source of environmental pollution. In this study adsorption of Cu (II) on seaweed (Ascophyllum nodosum)-derived biochar was systematically examined. The removal efficiency based on surface property of biochar and type of interactions associated with biochar produced at varying pyrolysis conditions were investigated. The highest removal efficiency of Cu (II) from aqueous media was >99% with 223 mg g-1 Cu (II) adsorption capacity observed by biochar derived at 700 °C and pH 5. Langmuir adsorption isotherm described the adsorption mechanisms of Cu (II) on biochar with cationic and anionic electrostatic attractions, surface precipitation, and pore depositions. Thus, this study shows that waste biomass (seaweed) could be a valuable bioresource for heavy metal remediation from various water bodies.

Energy Harvesting/Storage and Environmental Remediation via Hot Drinks Wastes

Providing energy and materials are considered one most important issue in the world. Produce and storage energy and also, prepare chemical substances from disposable biomass materials have been widely developed in recent decades to decrease environmental pollutions and production costs. The waste of hot drinks including coffee wastes and tea wastes have considerable potentials to provide energy and different chemical substances. Also, hazardous materials (especially aqueous ions) can be absorbed via hot drinks wastes to protect the environment against perilous pollutants. The low-cost and benign hot drinks wastes including tea wastes and coffee grounds and also the pyrolyzed of them as the hot drinks waste biochar materials have been widely used to produce and store green energies and also, absorb hazardous materials. Production and storage energy and environmental remediation in these sustainable procedures not only reduce the cost of energy but also protect the environment.

A Promising Solution for Food Waste: Preparing Activated Carbons for Phenol Removal from Water Streams

Phenol and its derivatives are highly toxic chemicals and are widely used in various industrial applications. Therefore, the industrial wastewater streams must be treated to lower the concentration of phenol before discharge. At the same time, food waste has been a major environmental problem globally and the scientific community is eagerly seeking effective management solutions. The objective of this study was to understand the potential of utilizing food waste as a renewable and sustainable resource for the production of activated carbons for the removal of phenol from water streams. The food waste was pyrolyzed and physically activated by steam. The pyrolysis and activation conditions were optimized to obtain activated carbons with high surface area. The activated carbon with the highest surface area, 745 m2 g-1, was derived via activation at 950 °C for 1 h. A detailed characterization of the physicochemical and morphological properties of the activated carbons derived from food waste was performed and a comprehensive adsorption study was conducted to investigate the potential of using the activated carbons for phenol removal from water streams. The effects of pH, contact time, and initial concentration of phenol in water were studied and adsorption models were applied to experimental data to interpret the adsorption process. A remarkable phenol adsorption capacity of 568 mg g-1 was achieved. The results indicated that the pseudo-second-order kinetic model was better over the pseudo-second-order kinetic model to describe the kinetics of adsorption. The intraparticle diffusion model showed multiple regions, suggesting that the intraparticle diffusion was not the sole rate-controlling step of adsorption. The Langmuir isotherm model was the best model out of Freundlich, Temkin, and Dubinin-Radushkevich models to describe the phenol adsorption on activated carbons derived from food waste. This study demonstrated that food waste could be utilized to produce activated carbon and it showed promising capacity on phenol removal.

Clay-activated carbon adsorbent obtained by activation of spent bleaching earth and its application for removing Pb(II) ion

BE/C-A750-1/1 is prepared by carbonizing SBE and then activating with KOH. BE/C-A750-1/1 has good adsorption capacity for Pb(II), and the adsorption capacity for Pb(II) is 206.65 mg/g. The harmful effects of coexisting cations are listed in ascending order: K⁺ < Na⁺ < Mg²⁺. Adsorption and desorption studies show that the adsorption capacity of BE/C-A750-1/1 for Pb(II) after adsorption and desorption 3 times is 183.62 mg/g. The adsorption mechanism mainly includes electrostatic attraction, ion exchange, physical adsorption, and chemical complexation. This suggests that activated BE/C may be a promising candidate for removing Pb(II) from industrial wastewater. Clay/carbon nanocomposites were prepared by carbonizing and activating the spent bleaching earth served as adsorbents for the efficient removal of Pb(II) from wastewater.

In-situ monitoring of phenol in surface waters by diffusive gradients in thin films technique based on the nanocomposites of zero-valent iron@biochar

The nano-sized zero valent iron assisted biochar from hazelnut shell (nZVI@biochar) was prepared and assessed for the feasibility as the binding agent in diffusive gradients in thin-films (DGT) technique. The 1.5% agarose solution containing the optimal nZVI@biochar dose of 15 g L^-1 was used to prepare the nZVI@biochar binding gel which owned a high capacity (1010 ± 50 μg disc^-1) and a rapid uptake within 30 min. The elution efficiency of phenol from the loaded binding gel was up to 99.3% using the mixture of 1% hydroxylamine hydrochloride and 0.05 mol L^-1 HCl. The phenol uptake of nZVI@biochar-DGT increased linearly with the increase of deployment time (R² = 0.9938) and was in accord with the theoretical values from DGT equation, while there was no notable interference of the sample matrixes on the phenol uptake of nZVI@biochar-DGT in the spiked freshwaters. The good performance of nZVI@biochar-DGT was found under a range of pH (4.1-10.2), ionic strength (as pNaNO₃) (0.155-4), and dissolved organic matter up to 20 mg L^-1. In field, the monitoring of nZVI@biochar-DGT was more representative than the results from the grab-sampling with better precision and lower sampling frequency, which can provide reliable information, reduce the cost of human resources, and improve efficiency. These illustrate that the nZVI@biochar is more suitable as the binding agent of DGT for uptake of phenol and nZVI@biochar-DGT is an effective tool to monitor in-situ phenol in waters.

Biochar for urban agriculture: Impacts on soil chemical characteristics and on Brassica rapa growth, nutrient content and metabolism over multiple growth cycles

With possible food crises looming in the near future, urban farming, including small-scale community and home gardens for home consumption, presents a promising option to improve food security in cities. These small-scale farms and gardens often use planter boxes and raised beds filled with lightweight soil or potting mixes. While previous studies on biochar focused on its application on large-scale contiguous farmlands, this study aimed to evaluate the suitability of biochar as a partial soil substitute to produce a durable and lightweight soil-biochar mix for small-scale urban farms. The effects of biochar on the chemical properties of the soil-biochar mix, crop yield and, particularly, crop nutrients and metabolic content were assessed. A germination test using pak choi seeds (Brassica rapa L. cultivar group Pak choi, Green-Petioled Form) showed that the biochar contained phytostimulants. Through a nursery pot experiment over four growth cycles, biochar treatments performed better than pure soil at retaining water-soluble NO₃^- and K⁺ ions, but were worse at retaining PO₄^3- ions. Nonetheless, despite its positive effect on soil NO₃^- retention, biochar application did not improve crop yield significantly when the application rate varied from 0% to 60% (v/v). Untargeted metabolomic analyses showed that biochar application may increase the production of carbohydrates and certain flavonoids and glucosinolates. The results of this study showed that biochar can potentially be used to improve pak choi nutritional values and applied in large quantity to obtain a lightweight soil mix for urban farming.

Absorption of Cu(II) and Zn(II) from Aqueous Solutions onto Biochars Derived from Apple Tree Branches

The aim of this study was to investigate the adsorption of Cu(II) and Zn(II) onto apple tree branches biochar (BC) produced at 300, 400, 500 and 600 °C (BC300, BC400, BC500, and BC600), respectively. The effect of adsorbent dosage, pH value, contact time, initial concentration of Cu(II) or Zn(II), and temperature on the adsorption process were investigated. The result showed that 5 g BC·L−1 was the optimal dosage to remove Cu(II) and Zn(II) from wastewater and the maximum adsorption efficiency was achieved at a pH of 5.0 for all the BCs when the initial concentration of Cu(II) and Zn(II) were 64 and 65 mg L−1, respectively. Adsorption kinetics and isotherm experiments showed that the pseudo-second order equation and the Langmuir isotherm could best describe the adsorption process, indicating that the adsorption of Cu(II) and Zn(II) onto BCs were monolayer processes and chemisorption was the rate limiting step. The values of ΔG0 for the absorption of Cu(II) and Zn(II) on all BCs were negative, while the values of ΔH0 were positive, suggesting that the absorption was a spontaneous endothermic process. The mechanisms of BC adsorption of metal ions adsorption include surface precipitation, ion exchange, and minor contribution by cation-π interaction. BC500 had highest Cu(II) and Zn(II) adsorption capacity under various conditions (except at pH 2.0). The maximum adsorption capacities of Cu(II) and Zn(II) on BC500 were 11.41 and 10.22 mg·g−1, respectively. Therefore, BC derived from apple tree branches produced at 500 °C can be used as an adsorbent to remove Cu(II) and Zn(II) from wastewater.

Parametric Study on Microwave-Assisted Pyrolysis Combined KOH Activation of Oil Palm Male Flowers Derived Nanoporous Carbons

Oil palm male flowers (PMFs), an abundant agricultural waste from oil palm plantation in Thailand, have been utilized as an alternative precursor to develop nanoporous carbons (NPCs) via microwave-assisted pyrolysis combined potassium hydroxide (KOH) activation. The influences of relevant processing variables, such as activating agent ratio, microwave power, and activation time on the specific pore characteristics, surface morphology, and surface chemistry of PMFs derived nanoporous carbons (PMFCs) have been investigated to explore the optimum preparation condition. The optimum condition under a microwave radiation power of 700 W, activation holding time of 6 min, and activating agent ratio of 2:1 obtained the PMFC with the highest Brunauer–Emmett–Teller (BET) surface area and total pore volume approximately of 991 m²/g and 0.49 cm³/g, composed of a carbon content of 74.56%. Meanwhile, PMFCs have a highly microporous structure of about 71.12%. Moreover, activating agent ratio and microwave radiation power indicated a significant influence on the surface characteristics of PMFCs. This study revealed the potential of oil palm male flowers for the NPCs’ production via microwave-assisted KOH activation with a short operating-time condition.

Removal of phenolic compounds from aqueous solution using MgCl2-impregnated activated carbons derived from olive husk: the effect of chemical structures

Activated carbon (BC) prepared from olive oil solid waste (olive husk) by slow pyrolysis was chemically activated using MgCl₂ (BC-MgCl₂). The BC and BC-MgCl₂ were used as adsorbents for removal of three phenolic compounds, namely, phenol (P), p-methoxyphenol (PMP) and p-nitrophenol (PNP), from aqueous solution. The uptake of these three phenolic compounds by the BC and BC-MgCl₂ was better expressed by the Langmuir and Dubinin-Radushkevich (D-R) isotherm models than by the Freundlich isotherm, and the kinetics of the adsorption process followed the pseudo-second order kinetic model. The maximum monolayer adsorption capacity of P, PMP and PNP were increased from 24.938, 45.455 and 61.728 on BC to 43.860, 98.039 and 121.951 mg/g on BC-MgCl₂ by factors of 1.76, 2.16 and 1.98, respectively. Therefore, the chemical activation of BC by MgCl₂ is indeed of importance for improving its adsorption performances. For both adsorbents, the adsorption phenomenon for different substituted phenols is a strong function of solubility, polarity, molecule structure, and size. At the tested temperatures (25, 35 and 45 °C), the negative values of ΔG° and positive values of ΔH° and ΔS° for the adsorption of P, PMP and PNP on BC and BC-MgCl₂ demonstrated that the adsorption was a spontaneous, endothermic and entropy-increasing process.

Recent advances in biochar application for water and wastewater treatment: a review

In the past decade, researchers have carried out a massive amount of research on the application of biochar for contaminants removal from aqueous solutions. As an emerging sorbent with great potential, biochar has shown significant advantages such as the broad sources of feedstocks, easy preparation process, and favorable surface and structural properties. This review provides an overview of recent advances in biochar application in water and wastewater treatment, including a brief discussion of the involved sorption mechanisms of contaminants removal, as well as the biochar modification methods. Furthermore, environmental concerns of biochar that need to be paid attention to and future research directions are put forward to promote the further application of biochar in practical water and wastewater treatment.

Adsorption of sulfate ion from water by zirconium oxide-modified biochar derived from pomelo peel

Zirconium oxide-modified pomelo peel biochar (ZrBC) was synthesized for the adsorption of sulfate ion from aqueous solution. Zirconyl chloride octahydrate (ZCO) was used to modify pomelo peel biochar into ZrBC. The optimal dose of ZCO for modification is 0.5 mol/L, at which ZrBC shows the highest adsorption of sulfate ion. The adsorbents were characterized by the field emission scanning electron microscopy, X-ray photoelectron spectroscopy and surface area measurement. The results confirm that the presence of zirconium oxides and hydroxide groups on the ZrBC surface, and ZrBC has a porous structure and a higher specific surface area in comparison with pomelo peel biochar. ZrBC shows good affinity for sulfate ion with a maximum sulfate adsorption capacity of 35.21 mg/g, which is much higher than that of pomelo peel biochar (1.02 mg/g). The adsorption of sulfate on ZrBC is pH dependent, and acidic conditions favor the adsorption. The adsorption can reach near-equilibrium in approximately 120 min. The adsorption kinetics and isotherm follow the pseudo second-order equation and Langmuir adsorption model, respectively. Furthermore, nitrate and fluoride anions exhibit little influence on the adsorption of sulfate by ZrBC, whereas phosphate inhibits the adsorption under the same concentration conditions. ZrBC has the potential to be used for removal of sulfate from aqueous solution.

Low-Cost Biochar Adsorbents for Water Purification Including Microplastics Removal

The applicability of steam activated pine and spruce bark biochar for storm water and wastewater purification has been investigated. Biochar samples produced from the bark of scots pine (Pinus sylvestrus) and spruce (Picea spp.) by conventional slow pyrolysis at 475 °C were steam activated at 800 °C. Steam activation was selected as a relatively inexpensive method for creating porous biochar adsorbents from the bark-containing sidestreams of the wood refining industry. A suite of standard analytical procedures were carried out to quantify the performance of the activated biochar in removing both cations and residual organics from aqueous media. Phenol and microplastics retention and cation exchange capacity were employed as key test parameters. Despite relatively low surface areas (200–600 m2/g), the steam-activated biochars were highly suitable adsorbents for the chemical species tested as well as for microplastics removal. The results indicate that ultra-high porosities are not necessary for satisfactory water purification, supporting the economic feasibility of bio-based adsorbent production.

A green route for pyrolysis poly-generation of typical high ash biomass, rice husk: Effects on simultaneous production of carbonic oxide-rich syngas, phenol-abundant bio-oil, high-adsorption porous carbon and amorphous silicon dioxide

Rice husk is a widespread agriculture waste in rice-farming country. High silica content in rice husk prevent its efficient utilization. So in this work, concept of poly-generation was introduced to improve its utilization value. This study provided CO-rich syngas, phenol-abundant bio-oil, high-adsorption porous carbon and amorphous SiO₂ as four end products for first time via combination of acid washing and activated carbon catalyst. Specifically, acid washing effectively decreasedsoluble ash, which altered pyrolysis paths, increased volatiles release and reduced impurities in bio-char. After catalytic pyrolysis, phenol content of 65.56% and CO of 56.09 vol% were detected in bio-oil and syngas from AWRH. For solid products, acid washing benefited both bio-char and silica. A low-cost porous carbon with developed pores and rich surface functional groups was prepared for water absorption. And high purity amorphous SiO₂ was recycled from alkali etching solution. Finally, a green process with no waste emission was proposed.

Metal sorption by biochars: A trade-off between phosphate and carbonate concentration as governed by pyrolysis conditions

Three feedstocks, pine wood, grass and cow manure, were pyrolyzed under various conditions and tested on their ability to sorb metals in aquatic systems. The feedstocks were pyrolyzed at 2 different temperatures (350 °C and 550 °C) and 2 different residence times (10 and 60 min) and resulting biochars were assessed on their capability to immobilize Pb, Cu, Cd and Zn. Manure-based chars, and to a lesser extent grass-based chars, featured high concentrations of phosphates and carbonates. These anions play an important role in metal sorption because they form insoluble complexes with the metals. Washing reduced the concentration of these anions, leading to a reduced sorption of metals by the biochar. The carbonate concentration on the biochars' surface increased at higher reactor temperature and longer residence times. The opposite trend was observed for the phosphate concentration and the cation exchange capacity. Accordingly, the optimal temperature-residence time combination for sorption was a trade-off between these properties. Biochar produced from cow manure and pyrolyzed at 550 °C for 10 min showed the best sorption for all metals considered.

Potential of Punica granatum biochar to adsorb Cu(II) in soil

Biochar as a promising adsorbent to remove heavy metals has attracted much attention globally. One of the potential adsorbents is biochar derived from punica granatum peels, a growing but often wasted resource in tropical countries. However, the immobilization capacity of punica granatum peel biochar is not known. This study investigated the physicochemical properties of punica granatum peel boichars pyrolyzed at 300 °C and 600 °C (referred as BC300 and BC600), and the efficiency and mechanisms of Cu(II) adsorption of five types of material treatments: BC300, BC600, soil only, and soils with biochar amendment BC300 and BC600, respectively, at the rate of 1% of the soil by weight. The results show that BC300 had higher yield, volatile matter content and organic carbon content, and larger pore diameter, but less ash content, surface area, pH, and cation exchange capacity than BC600. The Cu(II) adsorption capacity onto biochars and soils with biochar were greatly influenced by initial ion concentration and contact time. The Cu(II) adsorption capacity of biochar, independent of pyrolysis temperature, was around 52 mg g⁻¹. The adsorption capacity of the soil amended with biochar nearly doubled (29.85 mg g⁻¹) compared to that of the original soil (14.99 mg g⁻¹), indicating superb synergetic adsorption capacity of the biochar-amended soils. The adsorption isotherms showed monolayer adsorption of Cu(II) on biochar, and co-existence of monolayer and multilayer adsorption in soils with or without biochar amendment. Results also suggest that the adsorption process is spontaneous and endothermic, and the rate-limiting phase of the sorption process is primarily chemical. This study demonstrates punica granatum peel biochar has a great potential as an adsorbent for Cu(II) removal in soil.

A comprehensive review on physical activation of biochar for energy and environmental applications

Biochar is a solid by-product of thermochemical conversion of biomass to bio-oil and syngas. It has a carbonaceous skeleton, a small amount of heteroatom functional groups, mineral matter, and water. Biochar’s unique physicochemical structures lead to many valuable properties of important technological applications, including its sorption capacity. Indeed, biochar’s wide range of applications include carbon sequestration, reduction in greenhouse gas emissions, waste management, renewable energy generation, soil amendment, and environmental remediation. Aside from these applications, new scientific insights and technological concepts have continued to emerge in the last decade. Consequently, a systematic update of current knowledge regarding the complex nature of biochar, the scientific and technological impacts, and operational costs of different activation strategies are highly desirable for transforming biochar applications into industrial scales. This communication presents a comprehensive review of physical activation/modification strategies and their effects on the physicochemical properties of biochar and its applications in environment-related fields. Physical activation applied to the activation of biochar is discussed under three different categories: I) gaseous modification by steam, carbon dioxide, air, or ozone; II) thermal modification by conventional heating and microwave irradiation; and III) recently developed modification methods using ultrasound waves, plasma, and electrochemical methods. The activation results are discussed in terms of different physicochemical properties of biochar, such as surface area; micropore, mesopore, and total pore volume; surface functionality; burn-off; ash content; organic compound content; polarity; and aromaticity index. Due to the rapid increase in the application of biochar as adsorbents, the synergistic and antagonistic effects of activation processes on the desired application are also covered.

The effect of biochar mild air oxidation on the optimization of lead(II) adsorption from wastewater

In the present study, the effects of mild air oxidation of a biochar produced by the Pyrovac Inc. pyrolysis process, on the adsorption of lead(II) from synthetic wastewater under batch experimental conditions have been investigated. The adsorption experiments were performed under several conditions suggested by the response surface methodology, which allowed finding the optimal conditions, in order to maximize the adsorption capacity (Q(mgg^-1)), as well as the extraction efficiency (E (%)). The optimal conditions of lead ions adsorption were as follows: pH = 5, agitation time = 300 min, adsorbent mass = 0.5 g (per 50 cm³ of solution), and lead initial concentration = 100gm^-3, resulted in an adsorption capacity of 7.9 mg g^-1. Equilibrium adsorption was then obtained by keeping pH and adsorbent mass at the optimal values and changing the lead initial concentration for a sufficient agitation time. Results showed that mild air oxidation increased the equilibrium adsorption capacity of biochar from 2.5 to 44 mg g^-1. Oxidized biochar after equilibrium adsorption was submitted to SEM/EDX and XPS analysis. From SEM it was found that lead particles were distributed heterogeneously after adsorption. From XPS analysis, it was revealed that the external surface of oxidized biochar particles becomes saturated for the initial point of equilibrium diagram, obtained at lead initial concentration of 100gm^-3, suggesting that for a higher concentration, the internal surfaces of particles participate in the cations adsorption. The participation of surface functional groups in the adsorption process showed that carbonyl, carboxylic, and aromatic rings of oxidized biochar were involved in the adsorption. This work suggests that the very simple process of mild air oxidation can be used instead of the usual costly chemical activation, in order to improve biochar cation exchange capacity.

Porous graphitic biocarbon and reclaimed carbon fiber derived environmentally benign lightweight composites

Bamboo-derived biocarbon (BA900) and wood-derived biocarbon (THOC700) have exhibited graphite-like characteristics through transmission electron microscopy, X-ray diffraction (XRD), and Attenuated Total Reflectance (ATR) spectroscopy analysis. Lightweight composites of biocarbons were manufactured by a mechanism of shear controlled melt-phase mixing, ensuring the preservation of biocarbon pore structures and simultaneously taking full advantage of low density polyolefin substrates. Effective tensile strength was improved by approximately 10% in the polypropylene-based bamboo carbon composite, whereas no appreciable improvement was observed in the tensile and impact strength of bamboo-derived biocarbon formulations compared to neat polymer. However, the tensile and flexural moduli and flexural strength of the THOC700-PP composites were significantly enhanced, by 56%, 67%, and 19%, respectively, compared to neat polymer. The most significant finding of the investigation was the retention of density in polyolefin polymer (ρ_PP = 0.91; ρ_THOC = 0.95; ρ_BA900 = 0.99), with enhanced mechanical performance useful for lightweighting applications. Bamboo biocarbon provides a viable alternative to another abundantly available industrial carbon feedstock, reclaimed carbon fiber (RCF), in manufacturing thermoplastic composites. The origin of the carbon plays an important role in defining ultimate composite performance. A mechanism for retaining lightweight structural performance has been proposed in this original work, paving the way to develop next-generation lightweight thermoplastic structures for transportation and other industrial and consumer products.