Paracetamol and salicylic acid removal from contaminated water by microalgae

Tracking drugged waters from various sources to drinking water-its persistence, environmental risk assessment, and removal techniques

Pharmaceuticals have become a major concern due to their nature of persistence and accumulation in the environment. Very few studies have been performed relating to its toxicity and ill effects on the aquatic/terrestrial flora and fauna. The typical wastewater and water treatment processes are not efficient enough to get these persistent pollutants treated, and there are hardly any guidelines followed. Most of them do not get fully metabolized and end up in rivers through human excreta and household discharge. Various methods have been adopted with the advancement in technology, sustainable methods are more in demand as they are usually cost-effective, and hardly any toxic by-products are produced. This paper aims to illustrate the concerns related to pharmaceutical contaminants in water, commonly found drugs in the various rivers and their existing guidelines, ill effects of highly detected pharmaceuticals on aquatic flora and fauna, and its removal and remediation techniques putting more emphasis on sustainable processes.

Assessing the potential for nevirapine removal and its ecotoxicological effects on Coelastrella tenuitheca and Tetradesmus obliquus in aqueous environment

Remediation of the antiretroviral (ARV) drug, nevirapine (NVP) has attracted considerable scientific attention in recent years due to its frequent detection and persistence in aquatic environments and potential hazards to living organisms. Algae-based technologies have been emerging as an environmentally friendly option for the removal of pharmaceutical compounds, but their ARV drug removal potential has not been fully explored yet. This study aimed to explore the ecotoxicity and removal potential of NVP by two microalgal species, Coelastrella tenuitheca and Tetradesmus obliquus. Lower environmental concentrations (up to 200 ng L^-1) of NVP enhanced the microalgal growth, and the highest dry cell weight of 941.27 mg L^-1 was obtained in T. obliquus at 50 ng L^-1 NVP concentration. Both microalgae showed varying removal efficiencies (19.53-74.56%) when exposed to NVP concentration levels of up to 4000 ng L^-1. At the late log phase (day 8), T. obliquus removed the highest percentage of NVP (74.56%), while C. tenuitheca removed 48% at an initial NVP concentration of 50 ng L^-1. Photosynthetic efficiency (Fv/Fm and rETR) of the two microalgal species, however, was not affected by environmental concentrations of NVP (up to 4000 ng L^-1) at the mid log phase of growth. SEM analysis demonstrated that both algal species produced distinct ridges on their cell surfaces after NVP uptake. In the ecotoxicity study, the calculated IC₅₀ values of NVP (0-100 mg L^-1) after 96 h of exposure were 23.45 mg L^-1 (C. tenuitheca) and 18.20 mg L^-1 (T. obliquus). The findings of the present study may contribute to a better understanding of the environmental hazards associated with NVP and the efficacy of microalgae in removing this pharmaceutical from aquatic environments.

Pharmaceutical residues: One of the significant problems in achieving 'clean water for all' and its solution

With the rapid emergence of various metabolic and multiple-drug-resistant infectious diseases, new pharmaceuticals are continuously being introduced in the market. The excess production and use of pharmaceuticals and their untreated/unmetabolized release in the environment cause the contamination of aquatic ecosystem, and thus, compromise the environment and human-health. The present review provides insights into the classification, sources, occurrence, harmful impacts, and existing technologies to curb these problems. A comprehensive detail of various biological and nanotechnological strategies for the removal of pharmaceutical residues from water is critically discussed focusing on their efficiencies, and current limitations to design improved-technologies for their lab-to-field applications. Furthermore, the review highlights and suggests the scope of integrated bionanotechnological methods for enhanced removal of pharmaceutical residues from water to fulfill the United Nations Sustainable Development Goal (UN-SDG) for providing clean potable water for all.

Microalgae, a current option for the bioremediation of pharmaceuticals: a review

In this review, research on the use of microalgae as an option for bioremediation purposes of pharmaceutical compounds is reported and discussed thoroughly. Pharmaceuticals have been detected in water bodies around the world, attracting attention towards the increasing potential risks to humans and aquatic biota. Unfortunately, pharmaceuticals have no regulatory standards for safe disposal in many countries. Despite the advances in new analytical techniques, the current wastewater treatment facilities in many countries are ineffective to remove the whole presence of pharmaceutical compounds and their metabolites. Though new methods are substantially effective, removal rates of drugs from wastewater make the cost-effectiveness ratio a not viable option. Therefore, the necessity for investigating and developing more adequate removal treatments with a higher efficiency rate and at a lower cost is mandatory. The present review highlights the algae-based removal strategies for bioremediation purposes, considering their pathway as well as the removal rate and efficiency of the microalgae species used in assays. We have critically reviewed both application of living and non-living microalgae biomass for bioremediation purposes considering the most commonly used microalgae species. In addition, the use of modified and immobilized microalgae biomass for the removal of pharmaceutical compounds from water was discussed. Furthermore, research considering various microalgal species and their potential use to detoxify organic and inorganic toxic compounds were well evaluated in the review. Further research is required to exploit the potential use of microalgae species as an option for the bioremediation of pharmaceuticals in water.

Mass-Transfer Simulation of Salicylic Acid on Weakly Polar Hyper-cross-linked Resin XDA-200 with Coadsorption of Sodium Ion

The mass-transfer process of salicylic acid on hyper-cross-linked resin XDA-200 was experimentally and theoretically studied. Undissociated salicylic acid was found to be the favorable form for salicylic acid adsorption on the resin. A pH-dependent adsorption isotherm model established in this paper could well fit the adsorption isotherm data at different pH values. Surface diffusion is the main mass-transfer mode for salicylic acid in resin particles. The salicylate anions and Na⁺ coadsorbed on the resin. The modified surface diffusion model considering the coadsorption was proposed. The model could satisfactorily fit the concentration decay curves of salicylic acid at different pH values and feed concentrations. NaOH aqueous solution at pH 12 could elute salicylic acid in the fixed bed efficiently. A pH-dependent dynamic adsorption and elution process model considering axial diffusion, external mass transfer, surface diffusion, pH-dependent adsorption equilibrium, as well as coadsorption of salicylate anions and Na⁺ was established. The model could well predict the breakthrough and elution curves at different feed concentrations. The research carried out in this paper has reference significance for optimizing the separation process of salicylic acid and its analogues.

Ecofriendly and sustainable Sargassum spp.-based system for the removal of highly used drugs during the COVID-19 pandemic

Analgesic consumption increased significantly during the COVID-19 pandemic. A high concentration of this kind of drug is discarded in the urine, reaching the effluents of rivers, lakes, and seas. These medicines have brought serious problems for the flora and, especially, the ecosystems’ fauna. This paper presents the results of removing diclofenac, ibuprofen, and paracetamol in an aqueous solution, using Sargassum spp. from the Caribbean coast. The study consisted of mixing each drug in an aqueous solution with functionalized Sargassum spp in a container under constant agitation. Therefore, this work represents an alternative to solve two of the biggest problems in recent years; first, the reduction of the overpopulation of sargassum through its use for the remediation of the environment. Second is the removal of drug waste used excessively during the COVID-19 pandemic. Liquid samples of the solution were taken at intervals of 10 min and analyzed by fluorescence to determine the concentration of the drug.

The sorption capacity for diclofenac, ibuprofen, and paracetamol was 2.46, 2.08, and 1.41 μg/g, corresponding to 98 %, 84 %, and 54 % of removal, respectively. The removal of the three drugs was notably favored by increasing the temperature to 30 and 40 °C, reaching efficiencies close to 100 %. Moreover, the system maintains its effectiveness at various pH values. In addition, the Sargassum used can be reused for up to three cycles without reducing its removal capacity. The wide diversity of organic compounds favors the biosorption of drugs, removing them through various kinetic mechanisms. On the other hand, the Sargassum used in the drugs removal was analyzed by X-ray diffraction, FTIR spectroscopy, TGA analysis, and scanning electron microscopy before and after removal. The results showed an evident modification in the structure and morphology of the algae and demonstrated the presence of the biosorbed drugs. Therefore, this system is sustainable, simple, economical, environmentally friendly, highly efficient, and scalable at a domestic and industrial level that can be used for aquatic remediation environments.

Sustainable Mitigation of Paracetamol with a Novel Dual-Functionalized Pullulan/Kaolin Hydrogel Nanocomposite from Simulated Wastewater

In the present investigation, a novel, green, and economical dual-functionalized pullulan/kaolin hydrogel nanocomposite (f-PKHN) was fabricated and subsequently applied for the liquid-phase decontamination of paracetamol (PCT), a pharmaceutical pollutant. Pullulan and kaolin were functionalized with l-asparagine and gallic acid, respectively. The physicochemical facets of the functionalized pullulan/kaolin hydrogel nanocomposite and its interactive behavior with PCT were elucidated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), and elemental mapping. The process parameters along with the isotherm, kinetics, and thermodynamics were methodically appraised via a batch technique to unveil the adsorption performance of the as-fabricated hydrogel nanocomposite. The adsorption isotherm and kinetics of PCT uptake by f-PKHN conform well to Freundlich and pseudo-second-order models, respectively. Relying on hydrogen bonding, n-π, and van der Waals interactions, the maximum adsorption capacity was 332.54 mg g^-1, higher than for most of the previous adsorbents reported in the literature for PCT removal. Thermodynamic calculations corroborated endothermic, spontaneous, and feasible adsorption phenomena. The maintenance of a high uptake percentage (69.11%) in the fifth consecutive adsorption-desorption cycle implied the significant reusable potential of f-PKHN. Swelling studies exhibited 90% swelling within 200 min, indicating the successful fabrication of a cross-linked hydrogel network. The real water (distilled water, tap water, and river water) samples spiked with PCT specified a significant uptake of PCT (>85%), and the minor influence of ionic strength on the adsorptive potential of f-PKHN validated its potentiality for the decontamination of real effluents. In conclusion, f-PKHN with substantial adsorption capacity, green characteristics, and excellent reusability can be reckoned with as a promising adsorbent for the de-escalation of PCT from aquatic sources as well as at the industrial level.

Magnetic/electric field intervention on oil-rich filamentous algae production in the application of acrylonitrile butadiene styrene based wastewater treatment

Globally, the release of acrylonitrile-butadienestyrene (ABS) wastewater from numerous industries is a serious concern. Recently, oil-rich filamentous algae Tribonema sp has been grown utilizing toxic but nutrient-rich ABS effluent. Here, Tribonema sp. was cultivated under intervention of different magneto-electric combinatory fields (MCFs) (control, 0.6 V/cm, 1 h/d-1.2 V/cm, 1 h/d-0.6 V/cm, and 1 h/d-1.2 V/cm). Results showed MCF (1 h/d-0.6 V/cm) intervention increased the biomass by 9.7% (2.4 g/L) combined with high removal efficiencies (95% and 99%) of ammonium nitrogen and total phosphorus. The chemical oxygen demand (COD) removal rate increased to 82%, 6% higher than the control. Moreover, MCF of 1 h/d-0.6 V/cm significantly increased lipid and carbohydrate by 7.71% and 4.73% respectively. MCF increased premium fatty acid content such as palmitic acid (C16:0), myristic acid (C14: 0), and hexadecenoic acid (C16:1). MCF intervention also supported a diverse microbial flora, offering a favorable solution for ABS wastewater treatment.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

Organic wastes bioremediation and its changing prospects

Increasing inappropriate anthropogenic activities and industrialization have resulted in severe environmental pollution worldwide. Their effective treatment is vital for general health concerns. Depending on the characteristics of pollutants, the severity of pollution may differ. For sustainable treatment of polluted environments, bioremediation is accepted as the most efficient, economical, and environmentally friendly method hence largely preferred. However, every bioremediation technique has its own unique advantages and limitations due to its defined applications criteria. In bioremediation, microorganisms play a decisive role in detoxification by degrading, mineralizing and accumulating various forms of harmful and biodegradable pollutants from the surroundings and transforming them into less lethal forms. Bioremediation is performed ex-situ or in-situ, based on location of polluted site as well as characteristics, type and strength of the pollutants. Furthermore, the most popular methodologies for bioremediation include bioaugmentation, biostimulation, bioattenuation among others which depend on the prevailing environmental factors into the microbial system. Implementing them appropriately and effectively under ex-situ or in-situ method is extremely important not only for obtaining efficient treatment but also for the best economic, environmental, and social impacts. Therefore, this review aims to analyze various bioremediation methods for organic pollutants remediation from soil/sediments and wastewater, their strength, limitation, and insights for the selection of appropriate bioremediation techniques based on nature, types, degree, and location of the pollution. The novelty aspect of the article is to give updates on several key supporting technologies which have recently emerged and exhibited great potential to enhance the present bioremediation efficiency such as nanobubble, engineered biochar, mixotrophic microalgae, nanotechnology etc. Moreover, amalgamation of these technologies with existing bioremediation facilities are significantly changing the scenario and scope of environmental remediation towards sustainable bioremediation.

Current status of microbes involved in the degradation of pharmaceutical and personal care products (PPCPs) pollutants in the aquatic ecosystem

Contamination of aquatic systems with pharmaceuticals, personal care products, steroid hormones, and agrochemicals has been an immense problem for the earth's ecosystem and health impacts. The environmental issues of well-known persistence pollutants, their metabolites, and other micro-pollutants in diverse aquatic systems around the world were collated and exposed in this review assessment. Waste Water Treatment Plant (WWTP) influents and effluents, as well as industrial, hospital, and residential effluents, include detectable concentrations of known and undiscovered persistence pollutants and metabolites. These components have been found in surface water, groundwater, drinking water, and natural water reservoirs receiving treated and untreated effluents. Several studies have found that these persistence pollutants, and also similar recalcitrant pollutants, are hazardous to a variety of non-targeted creatures in the environment. In human and animals, they can also have severe and persistent harmful consequences. Because these pollutants are harmful to aquatic organisms, microbial degradation of these persistence pollutants had the least efficiency. Fortunately, only a few wild and Genetically Modified (GMOs) microbial species have the ability to degrade these PPCPs contaminants. Hence, researchers have been studying the degradation competence of microbial communities in persistence pollutants of Pharmaceutical and Personal Care Products (PPCPs) and respective metabolites for decades, as well as possible degradation processes in various aquatic systems. As a result, this review provides comprehensive information about environmental issues and the degradation of PPCPs and their metabolites, as well as other micro-pollutants, in aquatic systems.

A comprehensive review on current technologies for removal of endocrine disrupting chemicals from wastewaters

In the recent years, endocrine disrupting compounds (EDCs) has received increasing attention due to their significant toxic effects on human beings and wildlife by affecting their endocrine systems. As an important group of emerging pollutant, EDCs have been detected in various aquatic environments, including surface waters, groundwater, wastewater, runoff, and landfill leachates. Their removal from water resources has also been an emerging concern considering growing population as well as reducing access to fresh water resources. EDC removal from wastewaters is highly dependent on physicochemical properties of the given EDCs present in each wastewater types as well as various aquatic environments. Due to chemical, physical and physicochemical diversities in these parameters, variety of technologies consisting of physical, biological, electrochemical, and chemical processes have been developed for their removal. This review highlights that the effectiveness of EDC removal is highly dependent of selecting the appropriate technology; which decision is made upon a full wastewater chemical characterization. This review aims to provide a comprehensive perspective about all the current technologies used for EDCs removal from various aquatic matrices along with rising challenges such as the antimicrobial resistance gene transfer during EDC treatment.

Removal of salicylic acid by electrochemical processes using stainless steel and platinum anodes

Salicylic acid is an important pharmaceutic and widely used in plant hormones and personal care products. Peroxicoagulation (PC) method has recently been employed in treatment of various pollutants. In general, carbon-based cathode materials such as graphite and carbon fiber are used for in situ H₂O₂ production and stainless steel (SS316-L) anode for low iron production in PC studies as an efficient system modification. This study was conducted to investigate salicylic acid removal efficiency of electrochemical processes. Stainless steel was used as anode in this study. It was believed that the oxidation effect of stainless steel could be responsible for partial removal of salicylic acid. In this study, stainless steel anode and graphite or carbon fiber cathodes were employed in PC treatments for removing salicylic acid from aqueous solution, and some model trials were also made to investigate the in-situ Fe²⁺ and H₂O₂ production performance. Present findings revealed a total organic carbon (TOC) removal of 30.5% and salicylic acid removal of 69.5% at optimized conditions. The EF system modification used in the study can be proposed as an easy, low-cost and effective treatment alternative for treatment of pharmaceutical industry wastes such as salicylic acid.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Microalgal-based removal of contaminants of emerging concern

The presence of contaminants of emerging concern (CECs) in the environment has been recognized as a worldwide concern. In particular, water pollution by CECs is becoming a major global problem, which requires ongoing evaluation of water resources policies at all levels and the use of effective and innovative wastewaters treatment processes for their removal. Microalgae have been increasingly recognized as relevant for wastewater polishing, including CECs removal. These microorganisms are commonly cultivated in suspension. However, the use of planktonic microalgae for wastewater treatment has limitations in terms of microbiological contamination, process effectiveness and sustainability. The use of consortia of microalgae and bacteria represents a significant advance for sustainable wastewater polishing, particularly when the microorganisms are associated as biofilms. These immobilized mixed cultures can overcome the limitations of suspended-microalgae systems and improve the performance of the involved species for CECs removal. In addition, microalgae-bacteria based systems can offer a relevant combined effect for CECs removal and biomass production enhancement. This study reviews the advantages and advances on the use of microalgae for wastewater treatment, highlighting the potential on the use of microalgae-bacteria biofilms for CECs removal and the further biomass valorisation for third-generation biofuel production.

Current perspective of innovative strategies for bioremediation of organic pollutants from wastewater

Organic contaminants in water are a growing environmental threat to sustainable development, with detrimental effects on the biosphere. In recent years, researchers have increasingly focused their attention on the area of bioremediation as an important tool to eliminate harmful pollutants from the environment. This review examines the application of bioremediation technologies to the removal of organic pollutants, with an emphasis on hydrocarbons and textile dyes. It applies a descriptive bibliometric analysis to study statistical practicality-vs-applicability of bioremediation of emerging organic pollutants. The paper identifies efficient pathways for bioremediation of different types of organic pollutants and outlines the potential for an eco-friendly and economical approach for the biological remediation of micropollutants by microalgae. Facts and figures on various hazardous pollutants, constraints in their current removal from water at an industrial level, and promising future solutions are carefully presented here.

Application of Surfactant Modified Natural Zeolites for the Removal of Salicylic Acid-A Contaminant of Emerging Concern

This work aimed to test composites (surfactant modified zeolites prepared by treatment of natural zeolites—clinoptilolite (IZ CLI) and/or phillipsite (PHIL75)-rich tuffs with two different amounts of cationic surfactants: cetylpyridinium chloride (CPyCl) and Arquad^® 2HT-75 (ARQ)) for the adsorption of salicylic acid (SA)—a common contaminant of emerging concern. Adsorption of SA was studied at different initial drug concentrations (in the range of 2–100 mg/L) in water solution. The Langmuir isotherm model showed the highest adsorption was achieved by bilayer composite of IZ CLI and CPyCl—around 11 mg/g. Kinetic runs were performed by using the initial drug concentration of 20 mg/L in the time interval from 0 to 75 min and pseudo-second order had good correlation with experimental data. The influence of the four different temperatures on the SA adsorption was also investigated and thermodynamic parameters suggested that the adsorption drug onto composites is an exothermic and nonspontaneous process, followed by the decrease of randomness at the solid/liquid interface during the adsorption. Zeta potential and Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) had been performed for the characterization of composites after adsorption of SA confirming the presence of the drug at composite surfaces.

Specific toxicity of azithromycin to the freshwater microalga Raphidocelis subcapitata

Pharmaceuticals are produced to inflict a specific physiological response in organisms. However, as only partially metabolized after administration, these types of compounds can also originate harmful side effects to non-target organisms. Additionally, there is still a lack of knowledge on the toxicological effects of legacy pharmaceuticals such as the antibiotic azithromycin. This macrolide occurs at high concentrations in the aquatic environment and can constitute a threat to aquatic organisms that are at the basis of the aquatic food chain, namely microalgae. This study established a high-throughput methodology to study the toxicity of azithromycin to the freshwater microalga Raphidocelis subcapitata. Flow cytometry and pulse amplitude modulated (PAM) fluorometry were used as screening tools. General toxicity was shown by effects in growth rate, cell size, cell complexity, cell viability and cell cycle. More specific outcomes were indicated by the analysis of mitochondrial and cytoplasmatic membrane potentials, DNA content, formation of ROS and LPO, natural pigments content and photosystem II performance. The specific mode of action (MoA) of azithromycin to crucial components of microalgae cells was revealed. Azithromycin had a negative impact on the regulation of energy dissipation at the PSII centers, along with an insufficient protection by the regulatory mechanisms leading to photodamage. The blockage of photosynthetic electrons led to ROS formation and consequent oxidative damage, affecting membranes and DNA. Overall, the used methodology exhibited its high potential for detecting the toxic MoA of compounds in microalgae and should be considered for future risk assessment of pharmaceuticals.

Magnetic and electric field accelerate Phytoextraction of copper Lemna minor duckweed

In accordance with the opinion of the World Health Organization and the World Water Council the development of effective technologies for the treatment of wastewater from heavy metals for their discharge into water bodies or reuse is an urgent task nowadays. Phytoremediation biotechnologies is the most environmentally friendly and cheapest way of the treatment of wastewater, suitable for sustainable development principals. The main disadvantage of the phytoremediation is the slow speed of the process. A method for accelerating the process of phytoremediation by the combined effect of magnetic and weak electric fields is proposed. The purpose of this study is to determine the values of the parameters of the magnetic and weak electric fields that are most suitable for extracting cuprum ions from wastewater using the higher aqua plants (Lemna minor). A corresponding technological process based on the results of the study is proposed. The results have shown that the removal of copper cations from sulfate solutions effectively occurs in the initial period of time (1–5 hours) under the influence of a magnetic field with an intensity of H = 2 kA/m. Under the combined influence of an electrical current with density j = 240 μA/cm² and a magnetic field (H = 2 kA/m) the highest rate of copper extraction by duckweed leaves is achieved. Under these conditions, the greatest growth and development of plant leaves occurs. The paper presents the results of determining of the parameters of the electrochemical release from the eluate of the spent phytomass of duckweed. It has been determined that the release of metal occurs at E = 0.32 V. An original scheme for wastewater treatment from copper with subsequent separation of copper from the spent phytomass of duckweed is proposed. In general, the presented results are a scientific justification of wastewater treatment technologies and a contribution to resolving the crisis in the field of fresh water supply. An important contribution in the circular economy is a technology recommendation proposed for recovering copper from duckweed after wastewater treatment.

Removal of Imidacloprid from Water by Microalgae Nannochloropsis sp. and Its Determination by a Validated RP-HPLC Method

The large-scale use of pesticides is one of the main causes of the dramatic degradation of our environment. Pesticides such as imidacloprid (IMID) have been linked to declines in bee health and toxicity to other beneficial insects. They pose a threat to human health due to their persistence in the environment and accumulation in the food chain. Therefore, it is essential to test possible environmentally-friendly solutions for their elimination. The present study evaluates the efficiency of microalgae Nannochloropsis sp. for the removal of IMID from synthetic wastewater. The influence of aeration, light, and the presence of UV radiation on the degradation of IMID were factors considered in the study. A rapid RP-HPLC method was developed and validated for the analysis and quantification of IMID in the context of bioremediation with microalgae. Nannochloropsis sp. removed 4.39 µg mL^-1 from an initial content of 9.59 µg mL^-1 (reaching approximately 50%) of IMID in the first 20 h. This study demonstrated that the removal of IMID by the marine microalgae Nannochloropsis sp. is both effective and light-dependent.

Current advances in microalgae-based bioremediation and other technologies for emerging contaminants treatment

Emerging contaminants (EC) have been detected in effluents and drinking water in concentrations that can harm to a variety of organisms. Therefore, several technologies are developed to treat these compounds, either for their complete removal or degradation in less toxic by-products. Some technologies applied to the treatment of EC, such as adsorption, advanced oxidative processes, membrane separation processes, and bioremediation through microalgal metabolism, were identified by thematic maps. In this review, we used a bibliometric software from >1000 articles. These manuscripts, in general, present removals from 0% to 100% for different ECs. This efficiency varies between treatment technologies and the contaminants' physical-chemical properties and their concentration and operational parameters. This review explored the bioremediation of EC through microalgae with greater emphasis. The main mechanisms of action of microalgae in the bioremediation of ECs are biodegradation bioadsorption, and bioaccumulation. Also, physicochemical properties and removal efficiencies of >50 emerging contaminants are presented. Although there are challenges related to the generation of more toxic by-products and economic and environmental viability, these can be minimized with advances in the development of treatment technologies and even through the integration of different techniques to make the treatment of contaminants emerging from environmental media more sustainable.

Removal of pharmaceutical and personal care products (PPCPs) from wastewater using microalgae: A review

Pharmaceuticals and personal care products (PPCPs) are a group of emerging micro-pollutants causing detrimental effects on living organisms even at low doses. Previous investigations have confirmed the presence of PPCPs in the environment at hazardous levels, mainly due to the inefficiency of conventional wastewater treatment plants (CWWTPs). Their stable structure induces longer persistence in the environment. Microalgae are currently used to bioremediate numerous pollutants of different characteristics and properties released from the domestic, industrial, agricultural, and farm sectors. CO₂ mitigation during culture and the use of biomass as feedstock for biodiesel or biofuel production are, briefly, other benefits of microalgae-mediated treatment over CWWTPs. This review provides a comprehensive summary of recent literature, an overview of approaches and treatment systems, and breakthrough in the field of algal-mediated removal of PPCPs in wastewater treatment processes. The mechanisms involved in phycoremediation, along with their experimental approaches, have been discussed in detail. Factors influencing the removal of PPCPs from aqueous media are comprehensively described and assessed. A comparative study on microalgal strains is analyzed for a more efficient implementation of future processes. The role of microalgae to mitigate the most severe environmental impacts of PPCPs and the generation of antibiotic-resistant bacteria is discussed. Also, a detailed assessment of recent research on potential toxic effects of PPCPs on microalgae was conducted. The current review highlights microalgae as a promising and sustainable approach to efficiently bio-transform or bio-adsorb PPCPs.

Removal of Pharmaceuticals from Water by Free and Imobilised Microalgae

Pharmaceuticals and their metabolites are released into the environment by domestic, hospital, and pharmaceutical industry wastewaters. Conventional wastewater treatment technology does not guarantee effluents of high quality, and apparently clean water may be loaded with pollutants. In this study, we assess the performance and efficiency of free and immobilised cells of microalgae Nannochloropsis sp. in removing four pharmaceuticals, chosen for their occurrence or persistence in the environment. These are paracetamol, ibuprofen, olanzapine and simvastatin. The results showed that free microalgae cells remain alive for a longer time than the immobilised ones, suggesting the inhibition of cell proliferation by the polymeric matrix polyvinyl alcohol. Both cells, free and immobilised, respond differently to each pharmaceutical. The removal of paracetamol and ibuprofen by Nannochloropsis sp., after 24 h of culture, was significantly higher in immobilised cells. Free cells removed a significantly higher concentration of olanzapine than immobilised ones, suggesting a higher affinity to this molecule than to paracetamol and ibuprofen. The results demonstrate the effectiveness of Nannochloropsis sp. free cells for removing olanzapine and Nannochloropsis sp. immobilised cells for removing paracetamol and ibuprofen.

Mechanism analysis for the process-dependent driven mode of NaHCO3 in algal antibiotic removal: efficiency, degradation pathway and metabolic response

This work provided a comprehensive perspective to investigate the performance of NaHCO₃-driving effect and mechanism including the antibiotic removal, degradation pathway and metabolites analysis, and the algal physiological response during the removal process. Cefuroxime sodium was selected as the target antibiotic. Our results showed that NaHCO₃ did not facilitate self-decomposition of the target antibiotic, while drove the improvement on the removal capacity of every algal cell, which then attributed to the total removal efficiency. After 24 h, there was an improvement on the removal rate of the target antibiotic (from 10.21% to 92.89%) when NaHCO₃ was added. The degradation pathway of the target antibiotic was confirmed by the formation of three main products (M1, M2 and M3), and the degradation process, that from M1 to M2 and M2 to M3, was accelerated by the existence of NaHCO₃. Besides, a 4-stage model illustrated the relationship between NaHCO₃ and antibiotic removal process. Moreover, algal culture that supplemented with NaHCO₃ demonstrated a better growth capacity. A large increase in the content of chlorophyll a and a moderate increase in the activity of two carbon metabolic enzymes (RuBisCO and CA) might be viewed as a positive response of the algae during the NaHCO₃-driving process.

Chemically Modified Biosorbents and Their Role in the Removal of Emerging Pharmaceutical Waste in the Water System

Presence of pharmaceutically active compounds (PACs) as emerging contaminants in water is a major concern. Recent reports have confirmed the presence of PACs in natural and wastewater systems, which have caused several problems indicating the urgent need for their removal. The current review evaluates the role of chemically modified biosorbents in the removal of PACs in water. Reported biosorbents include plant and animal solid waste, microorganisms and bio-composite. Bio-composites exhibited better prospects when compared with other biosorbents. Types of chemical treatment reported include acid, alkaline, solvent extraction, metal salt impregnation and surface grafting, with alkaline treatment exhibiting better results when compared with other treatments. The biosorption processes mostly obeyed the pseudo-second-order model and the Langmuir isotherm model in a process described mainly by ionic interaction. Desorption and regeneration capacity are very important in selecting an appropriate biosorbent for the biosorption process. Depending on the type of biosorbent, the cost of water treatment per million liters of water was estimated as US $10–US $200, which presents biosorption as a cheap process compared to other known water treatment processes. However, there is a need to conduct large-scale studies on the biosorption process for removing PACs in water.

Green Microalgae Scenedesmus Obliquus Utilization for the Adsorptive Removal of Nonsteroidal Anti-Inflammatory Drugs (NSAIDs) from Water Samples

In view of the valorisation of the green microalga Scenedesmus obliquus biomass, it was used for the biosorption of two nonsteroidal anti-inflammatory drugs, namely salicylic acid and ibuprofen, from water. Microalgae biomass was characterized, namely by the determination of the point of zero charge (pH_PZC), by Fourier transform infrared (FT-IR) analysis, simultaneous thermal analysis (STA) and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Kinetic and equilibrium batch experiments were carried out and results were found to fit the pseudo-second order equation and the Langmuir isotherm model, respectively. The Langmuir maximum capacity determined for salicylic acid (63 mg g⁻¹) was larger than for ibuprofen (12 mg g⁻¹), which was also verified for a commercial activated carbon used as reference (with capacities of 250 and 147 mg g⁻¹, respectively). For both pharmaceuticals, the determination of thermodynamic parameters allowed us to infer that adsorption onto microalgae biomass was spontaneous, favourable and exothermic. Furthermore, based on the biomass characterization after adsorption and energy associated with the process, it was deduced that the removal of salicylic acid and ibuprofen by Scenedesmus obliquus biomass occurred by physical interaction.

From Laboratory Tests to the Ecoremedial System: The Importance of Microorganisms in the Recovery of PPCPs-Disturbed Ecosystems

The presence of a wide variety of emerging pollutants in natural water resources is an important global water quality challenge. Pharmaceuticals and personal care products (PPCPs) are known as emerging contaminants, widely used by modern society. This objective ensures availability and sustainable management of water and sanitation for all, according to the 2030 Agenda. Wastewater treatment plants (WWTP) do not always mitigate the presence of these emerging contaminants in effluents discharged into the environment, although the removal efficiency of WWTP varies based on the techniques used. This main subject is framed within a broader environmental paradigm, such as the transition to a circular economy. The research and innovation within the WWTP will play a key role in improving the water resource management and its surrounding industrial and natural ecosystems. Even though bioremediation is a green technology, its integration into the bio-economy strategy, which improves the quality of the environment, is surprisingly rare if we compare to other corrective techniques (physical and chemical). This work carries out a bibliographic review, since the beginning of the 21st century, on the biological remediation of some PPCPs, focusing on organisms (or their by-products) used at the scale of laboratory or scale-up. PPCPs have been selected on the basics of their occurrence in water resources. The data reveal that, despite the advantages that are associated with bioremediation, it is not the first option in the case of the recovery of systems contaminated with PPCPs. The results also show that fungi and bacteria are the most frequently studied microorganisms, with the latter being more easily implanted in complex biotechnological systems (78% of bacterial manuscripts vs. 40% fungi). A total of 52 works has been published while using microalgae and only in 7% of them, these organisms were used on a large scale. Special emphasis is made on the advantages that are provided by biotechnological systems in series, as well as on the need for eco-toxicological control that is associated with any process of recovery of contaminated systems.

Emerging prospects of mixotrophic microalgae: Way forward to sustainable bioprocess for environmental remediation and cost-effective biofuels

Algal bioremediation becoming most fascinating to produce biomass as biofuels feedstock while remediating wastes, also improving carbon-footprint through carbon capturing and utilization (CCU) technology. Non-algae process however offers effective treatment but metabolic CO₂ emission is major drawback towards sustainable bioprocess. Mixotrophic cultivation strategy (MCS) enables to treat organic and inorganic wastes which broadly extend microalgae application towards cleaner and sustainable bioeconomy. Latest focus of global think-tanks to encourage bioprocess holding promise of sustainability via CCU ability as important trait. Several high CO₂ emitting industries forced to improve their carbon-footprints. MCS driven microalgae treatment could be best solution for those industries. This review covers recent updates on MCS applications for waste-to-value (biofuels) and environment remediation. Moreover, recommendations to fill knowledge gaps, and commercial algal biofuel could be cost-effectiveness and sustainable technology for biocircular economy if fuelled by waste streams from other industries.

Multi-dimensional zinc oxide (ZnO) nanoarchitectures as efficient photocatalysts: What is the fundamental factor that determines photoactivity in ZnO?

While bulk zinc oxide (ZnO) is of non-toxic in nature, ZnO nanoarchitectures could potentially induce the macroscopic characteristics of oxidative, lethality and toxicity in the water environment. Here we report a systematic study through state-of-the-art controllable synthesis of multi-dimensional ZnO nanoarchitectures (i.e. 0D-nanoparticle, 1D-nanorod, 2D-nanosheet, and 3D-nanoflowers), and subsequent in-depth understanding on the fundamental factor that determines their photoactivities. The photoactivities of resultant ZnO nanoarchitectures were interpreted in terms of the photodegradation of salicylic acid as well as inactivation of Bacillus subtilis and Escherichia coli under UV-A irradiation. Photodegradation results showed that 1D-ZnO nanorods demonstrated the highest salicylic acid photodegradation efficiency (99.4%) with a rate constant of 0.0364 min^-1. 1D-ZnO nanorods also exhibited the highest log reductions of B. subtilis and E. coli of 3.5 and 4.2, respectively. Through physicochemical properties standardisation, an intermittent higher k value for pore diameter (0.00097 min^-1 per mm), the highest k values for crystallite size (0.00171 min^-1 per nm) and specific surface area (0.00339 min^-1 per m²/g) contributed to the exceptional photodegradation performance of nanorods. Whereas, the average normalised log reduction against the physicochemical properties of nanorods (i.e. low crystallite size, high specific surface area and pore diameter) caused the strongest bactericidal effect.

PYP1-4 peptide from Pyropia yezoensis protects against acetaminophen-induced hepatotoxicity in HepG2 cells

Acetaminophen (APAP) is a widely used analgesic and antipyretic. It is safe at normal treatment doses; however, APAP overdose is a major cause of acute liver and kidney failure. A variety of methods to reduce the damage caused by APAP overdose have previously been evaluated. The protein-rich seaweed Pyropia yezoensis has antioxidant, antitumor and anti-inflammatory activities, and protects against cytotoxicity. However, little is known regarding the protective effects of P. yezoensis peptide against APAP-induced hepatotoxicity. The present study investigated the ability of P. yezoensis peptide (PYP1-4) to ameliorate the damage caused by APAP-induced hepatotoxicity using HepG2 as the model cell line in addition to the signaling pathways involved. Briefly, cell viability, nitric oxide, reactive oxygen species and apoptosis assays were performed in conjunction with western blot analysis and reverse transcription-quantitative PCR. First, the present study revealed the minimum toxic concentration of APAP (15 mM) and the resting concentration of PYP1-4 (0–500 ng/ml). Administration of PYP1-4 to APAP-induced cells decreased the nitric oxide and reactive oxygen species levels, and restored the levels of antioxidant-associated proteins (catalase, heme oxygenase 1, superoxide dismutase 2 and quinone oxidoreductase 1). PYP1-4 increased the translocation of nuclear factor, erythroid 2 like 2 to the nucleus and the activities of glycogen synthase kinase-3β, Akt and AMP-activated protein kinase. In addition, APAP induced apoptosis; however, PYP1-4 inhibited apoptosis by modulating the levels of pro-apoptotic markers (Bad), anti-apoptotic markers (Bcl-2 and BH3 interacting domain death agonist), caspases and poly (ADP-ribose) polymerase 1. Subsequently, the insulin-like growth factor 1 receptor signaling pathway was investigated to determine whether PYP1-4 treatment restored the levels of cell growth-associated factors during APAP-induced hepatotoxicity. PYP1-4 treatment impacted the levels of components of the insulin receptor substrate 1/PI3K/Akt and Ras/Raf/ERK signaling pathways, and promoted cell survival. Therefore, the P. yezoensis peptide PYP1-4 may be useful for preventing APAP-induced hepatotoxicity.

Influence of nutrient supplementation and starvation conditions on the biomass and lipid productivities of Micractinium reisseri grown in wastewater for biodiesel production

Generation of biodiesel from microalgae grown in wastewater can offer a cost-effective approach, whilst wastewaters usually do not contain the optimum concentrations of the essential nutrients and carbon sources that result in lowering the productivities of biomass and lipid. This study aimed to overcome this limitation by manipulating wastewater with various concentrations of nutrients (NO₃^-, PO₄^3-, Cl^- and SO₄^2-) and three carbon sources either individually or in combination to cultivate Micractinium reisseri for biodiesel production. Initially, various dilutions of wastewater were tested and a concentration up to 75% of wastewater showed the highest biomass productivity (0.076 g L^-1 d^-1) and lipid productivity (0.014 g L^-1 d^-1). The optimum manipulating conditions for maximum lipid production and the highest productivity required 50% decrease in phosphorous from the concentration of the control medium and supplementation with 1.0 g L^-1 of glucose. Under this condition, biomass and lipid productivities increased by 1.7 and 4-folds, respectively, compared to those observed in the control. Furthermore, phosphorous starvation condition in the presence of glucose significantly improved fatty acid profile in the biomass and biodiesel quality related parameters.

Acetaminophen Removal from Water by Microalgae and Effluent Toxicity Assessment by the Zebrafish Embryo Bioassay

In this work, zebrafish embryo bioassays were performed to assess the efficiency of microalgae in the removal of acetaminophen from water. Chlorella sorokiniana (CS), Chlorella vulgaris (CV) and Scenedesmus obliquus (SO) were the strains used for water treatment. Toxic effects on zebrafish embryo caused by effluents from microalgae treatment were compared with those observed under exposure to experimental solutions with known concentrations of acetaminophen. The three microalgae strains allowed for the reduction of acetaminophen concentration and its toxic effects, but CS was the most efficient one. At the end of the batch culture, a 67% removal was provided by CS with a reduction of 62% in the total abnormalities on the exposed zebrafish embryo. On the other hand, toxic effects observed under exposure to effluents treated by microalgae were alike to those determined for acetaminophen experimental solutions with equivalent concentration. Thus, it may be inferred that microalgae biodegradation of acetaminophen did not involve an increased toxicity for zebrafish embryo.

Effect of PHRs and PCPs on Microalgal Growth, Metabolism and Microalgae-Based Bioremediation Processes: A Review

In this review, the effect of pharmaceuticals (PHRs) and personal care products (PCPs) on microalgal growth and metabolism is reported. Concentrations of various PHRs and PCPs that cause inhibition and toxicity to growths of different microalgal strains are summarized and compared. The effect of PHRs and PCPs on microalgal metabolism (oxidative stress, enzyme activity, pigments, proteins, lipids, carbohydrates, toxins), as well as on the cellular morphology, is discussed. Literature data concerning the removal of PHRs and PCPs from wastewaters by living microalgal cultures, with the emphasis on microalgal growth, are gathered and discussed. The potential of simultaneously bioremediating PHRs/PCPs-containing wastewaters and cultivating microalgae for biomass production in a single process is considered. In the light of reviewed data, the feasibility of post-bioremediation microalgal biomass is discussed in terms of its contamination, biosafety and further usage for production of value-added biomolecules (pigments, lipids, proteins) and biomass as a whole.

Algal-based removal strategies for hazardous contaminants from the environment - A review

Owing to the controlled or uncontrolled industrial wastewater disposal, pharmaceutical-based hazardous emerging contaminants (ECs) can be found in the environment all over the world. With ever-increasing socioeconomic aspects and environmental awareness, people are now more concerns about the widespread occurrences of hazardous and persistent contaminants, around the globe. In this context, several studies have already shown that various types of emerging and/or re-emerging contaminants, regardless the source, type and concentration, are of supreme threat to the living system of flora and fauna. Recently, algae-based bioreactors have gained special research interest as a promising way to remove pharmaceuticals-based ECs from the wastewater either partially or completely. This paper covers the progress on the removal of selected pharmaceuticals using bioreactors. In laboratory scale studies, high removal percentages have been reached for most selected pharmaceuticals, but data on full-scale bioreactors is limited. In this paper, two types of bioreactors are discussed, i.e., (1) open pond and (2) bubble column photobioreactor, which are considered sustainable and an effective alternative to remove ECs. In these bioreactors, high removal percentages (>90%) have been found for metoprolol, triclosan, and salicylic acid, moderate (50-90%) for carbamazepine and tramadol and very low (<10%) for trimethoprim and ciprofloxacin by inoculating different microalgae. This technique may open new opportunities for the treatment of wastewater and reduce the environmental pollution that can have adverse effects on the ecosystem and human health. In summary, the present review focuses on the microalgae for wastewater remediation. An effort has also been made to describe the generalities of the photobioreactor.

Removal of contaminants of emerging concern from urban wastewater in novel algal-bacterial photobioreactors

This work evaluates the removal of five pharmaceuticals and personal care products, i.e., ibuprofen, naproxen, salicylic acid, triclosan and propylparaben, from urban wastewater under two novel algal-bacterial photobioreactor settings. The first configuration (phase A) consisted of an anoxic-aerobic photobioreactor operating at a hydraulic retention time (HRT) of 2d at different concentrations of total organic carbon (TOC) (90mgL^-1-200mgL^-1). In the second configuration (phase B) an anaerobic step was introduced before the anoxic tank to set a photosynthetic A₂O process. In this phase, the HRT varied between 3 and 4d and the TOC was kept constant at 200mgL^-1. In addition, the impact of external aeration in the aerobic photobioreactor was assessed. The maximum removals for ibuprofen, naproxen, salicylic acid, triclosan and propylparaben (94±1%, 52±43%, 98±2%, 100±0%, 100±0%, respectively) were recorded during phase B. In phase A, low TOC concentrations triggered higher ibuprofen and naproxen removals likely due to the high contribution of biological oxidation on their removal. In phase B, total or very high removal efficiencies were observed for ibuprofen, propylparaben and triclosan independently on the operating conditions. In contrast, the removal efficiency of naproxen and salicylic acid decreased when the HRT dropped from 4 to 3d in the absence of external aeration, which suggests that biodegradation played a key role in their removal. In addition, sorption might have contributed to the elimination of triclosan and propylparaben from the wastewater.

Zebrafish embryo bioassays for a comprehensive evaluation of microalgae efficiency in the removal of diclofenac from water

This work deals with a preliminary study aimed at evaluating the efficiency of three different microalgae strains, namely Chlorella sorokiniana, Chlorella vulgaris and Scenedesmus obliquus in the bioremediation of diclofenac contaminated water. For this purpose, microalgae were cultured in bubbling column photobioreactors (PBRs) under batch operation until the end of the exponential growth phase. For the three strains, the concentration of diclofenac in the PBRs aquatic medium decreased along microalgae growing, which pointed to biodegradation as the main removal mechanism. Among the three strains, S. obliquus was the most capable to reduce diclofenac concentration (99% removal from an initial concentration of 25,000 μg l^-1). However, such a large removal does not guarantee an efficient treatment since transformation products (TPs) exceeding the concentration and/or toxicity of the parent compound may be generated during biodegradation of diclofenac. Thus, for a comprehensive evaluation of the microalgae treatments efficiency, the final effluents from the PBRs were tested for their effects on the embryonic development of zebrafish. Again, the S. obliquus treatment was the most efficient in the reduction of toxicity, with the corresponding effluents having no effects on the embryo's mortality or abnormalities incidence (at 80 h post fertilization). In any case, for the three strains, the toxicity effects of effluents were equal or lower than those determined for diclofenac solutions with the same concentration. Therefore, it may be stated that, at the end of the batch culture, the removal of diclofenac by the considered strains did not involve the generation of toxic TPs to zebrafish embryos.