Investigation of electrodialysis anti-fouling configuration for desalting and treating tannery unhairing wastewater: Feasibility of by-products recovery and water recycling

An overview of deploying membrane bioreactors in saline wastewater treatment from perspectives of microbial and treatment performance

The discharged saline wastewater has severely influenced the aquatic environment as the treatment performance of many wastewater treatment techniques is limited. In addition, the sources of saline wastewater are also plentiful from agricultural and various industrial fields such as food processing, tannery, pharmaceutical, etc. Although high salinity levels negatively impact the performance of both physicochemical and biological processes, membrane bioreactor (MBR) processes are considered as a potential technology to treat saline wastewater under different salinity levels depending on the adaption of the microbial community. Therefore, this study aims to systematically review the application of MBR widely used in the saline wastewater treatment from the perspectives of microbial structure and treatment efficiencies. At last, the concept of carbon dioxide capture and storage will be proposed for the MBR-treating saline wastewater technologies and considered toward the circular economy with the target of zero emission.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Application of Nanofiltration and Reverse Osmosis Membranes for Tannery Wastewater Reuse

Tanneries produce large amounts of wastewater with high concentrations of suspended solids, organic matter, and salts. Treatment and reuse of these effluents are of great importance to preserve water resources and save costs. Although suspended solids and high percentages of organic matter can be eliminated by physico-chemical and biological processes, refractory chemical oxygen demand (COD) and salts will remain in the wastewater after these processes. In particular, chloride and sulphate ion concentrations may hinder the treated wastewater from being reused or even discharged according to legal standards. In this work, two nanofiltration membranes and two reverse osmosis membranes are tested to assess these technologies as regeneration processes for biologically treated tannery wastewater. Permeate flux and rejection of organic matter and ions were measured at different operating conditions (transmembrane pressure and cross-flow velocities) at both total recycle and concentration modes. Results showed that the difference between permeate fluxes of nanofiltration (NF) membranes and reverse osmosis (RO) membranes was very high. Thus, at 20 bar and 1.77 m·s−1, the permeate flux of the two tested NF membranes in the total recycle mode experiments were 106 and 67 L·m−2·h−1, while the obtained permeate fluxes for the RO membranes were 25 and 18 L·m−2·h−1. Concerning rejections, RO membranes rejected almost 100% of the salts, whereas NF membranes reduced their rejection when faced with increasing concentration factors (salt rejection between 50–60% at the highest concentration factor). In addition, the fouling of RO membranes was lower than that of NF membranes, recovering more than 90% of initial permeability by only water rinsing. In contrast, chemical cleaning was necessary to increase the permeability recovery of the NF membranes above 90%. The considerably lower rejections and the higher membrane fouling of the NF membranes lead us to conclude that reverse osmosis could be the most feasible technique for water reuse in the tannery industry, though the permeate fluxes are lower than those achieved with NF membranes.

Tannery wastewater treatment: conventional and promising processes, an updated 20-year review

Mismanagement of various wastes especially waste water produced by tanning processes has caused serious environmental problems and ultimately impaired human health. Constant efforts have been making to alleviate the pollution of tannery wastewater (TWW), yet terminal treatment still takes dominance. In this review, research on TWW treatment from 2000 to 2021 was summarized, and main methods such as coagulation and flocculation, adsorption, biological treatment, membrane filtration, advanced oxidation process were briefly discussed. More detailed introduction was given to the method of electrochemical treatment since it has excellent performance such as environmental friendliness and high efficiency, hence attracting more and more research attention in recent years. In view of the harsh physi-chemical conditions of TWW, integrated or combined treatment methods are accordingly recommended with better performance and multi-function, however comprehensive studies on optimization of methods combination and cost-effectiveness are needed. The certain issues that the residue Cr in treatment sludge and high salinity in effluent still remain were put forward in this work and potential solutions were provided. Moreover, this review proposed the perspective that realizing multi-function, recycling, and intensification should be the developing direction for future TWW treatment. This review is expected to provide a general guide for researchers who aspire to ameliorate TWW pollution problems and understand various methods utilized in this field.

Graphical abstract

Heterogeneous Photodegradation for the Abatement of Recalcitrant COD in Synthetic Tanning Wastewater

Tannery wastewater is considered one of the most contaminated and problematic wastes since it consists of considerable amounts of organic and inorganic compounds. These contaminants result in high chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS). In this work, the heterogeneous photodegradation of recalcitrant COD in wastewater from the tanning industry was investigated, in particular the recalcitrant COD due to the presence of vegetable tannins extracted from mimosa and chestnut and from synthetic tannins based on 4,4′ dihydroxy phenyl sulfone. TiO2 Aeroxide P-25 was employed to study the photodegradation of model molecules in batch conditions under different parameters, namely initial concentration of COD, temperature, and catalyst dose. The maximum COD abatement reached was 60%. Additionally, preliminary kinetic investigation was conducted to derive the main kinetic parameters that can be useful for process scale-up. It was found to be independent of the temperature value but linearly dependent on both catalyst loading and the initial COD value.

From Waste to Watts: Updates on Key Applications of Microbial Fuel Cells in Wastewater Treatment and Energy Production

Due to fossil fuel depletion and the rapid growth of industry, it is critical to develop environmentally friendly and long-term alternative energy technologies. Microbial fuel cells (MFCs) are a powerful platform for extracting energy from various sources and converting it to electricity. As no intermediate steps are required to harness the electricity from the organic substrate’s stored chemical energy, MFC technology offers a sustainable alternative source of energy production. The generation of electricity from the organic substances contained in waste using MFC technology could provide a cost-effective solution to the issue of environmental pollution and energy shortages in the near future. Thus, technical advancements in bioelectricity production from wastewater are becoming commercially viable. Due to practical limitations, and although promising prospects have been reported in recent investigations, MFCs are incapable of upscaling and of high-energy production. In this review paper, intensive research has been conducted on MFCs’ applications in the treatment of wastewater. Several types of waste have been extensively studied, including municipal or domestic waste, industrial waste, brewery wastewater, and urine waste. Furthermore, the applications of MFCs in the removal of nutrients (nitrogen and sulphates) and precious metals from wastewater were also intensively reviewed. As a result, the efficacy of various MFCs in achieving sustainable power generation from wastewater has been critically addressed in this study.

Predicting factors of public awareness and perception about the quality, safety of drinking water, and pollution incidents

Public perception of drinking water quality and safety results from the interaction of multiple factors, including the public engagement, which requires sufficient knowledge and awareness. This issue has yet to be addressed in Algeria. This study investigated the residents' perception and awareness about the drinking water quality, safety, and water pollution events. A survey-based cross-sectional study was conducted amongst citizens living in the province of Biskra. Multinomial regression analysis was used to identify the predicted public perception factors about drinking water-related issues. Regardless of the degree of public trust in the drinking water sources, the main drinking water source reported by the participants was tank water (43.3%) followed by tap water (32%). Water quality standards are a measure of the condition of water relative to the contaminants. Water consumption profiles gave priority attention to taste (48.7%), odour (35%), appearance (34.7%), and colour (32%), reflecting a low level of knowledge about the water quality standards. Most of the residents (55.7%) reported a deficient communication about the preventive measures to protect public health. The higher level of education showed a statistically significant impact in discriminating between those who felt very satisfied and dissatisfied participants with the drinking water quality and those who felt between satisfied and dissatisfied (P = 0.023, P = 0.034, respectively). Additionally, education level had a statistically significant role in differentiating trust levels in drinking water quality between two groups, those belonging to either confident or relatively confident and the group of extremely worried respondents, with P = 0.000 and P = 0.000, respectively. Interviewed respondents with certain education levels showed higher trust in the safety of drinking water when compared to those with lower education levels. Gender had a significant role in differentiating the group of respondents who were relatively confident from those who were extremely worried (P = 0.016). The public knowledge about the standards of water quality, safety, and the pollution-related issues remains relatively low. This study is of interest to policy makers and public health authorities who implement actions for water contamination prevention and public health protection. These findings could have national implications and are also applicable, in general context, particularly in low and middle-income countries.

Current technologies for post-tanning wastewater treatment: A review

Leather post-tanning is responsible for producing effluents that are difficult to treat due to several recalcitrant pollutants. Dyes, tannins, and fatliquoring agents are mainly related to this characteristic. This study, as the state-of-the-art, attempts to systematically review treatment technologies applied in recent years to the post-tanning effluents. The Scopus database was used to identify articles related to post-tanning pollutants removal. Through the review, Advanced Oxidation Processes (AOPs) and adsorption proved to be good alternatives to increase the effluent biodegradability when applied before biological treatment. AOPs and adsorption were also efficient for the final polishing of the effluents, to reach the regulation standards for disposal, as well as enzymatic treatment. Furthermore, Membrane Separation Processes demonstrated good applicability when the reuse of the treated effluent is aimed.

Tanning Wastewater Treatment by Ultrafiltration: Process Efficiency and Fouling Behavior

Ultrafiltration is a promising, environment-friendly alternative to the current physicochemical-based tannery wastewater treatment. In this work, ultrafiltration was employed to treat the tanning wastewater as an upstream process of the Zero Liquid Discharge (ZLD) system in the leather industry. The filtration efficiency and fouling behaviors were analyzed to assess the impact of membrane material and operating conditions (shear rate on the membrane surface and transmembrane pressure). The models of resistance-in-series, fouling propensity, and pore blocking were used to provide a comprehensive analysis of such a process. The results show that the process efficiency is strongly dependent on the operating conditions, while the membranes of either PES or PVDF showed similar filtration performance and fouling behavior. Reversible resistance was the main obstacle for such process. Cake formation was the main pore blocking mechanism during such process, which was independent on the operating conditions and membrane materials. The increase in shear rate significantly increased the steady-state permeation flux, thus, the filtration efficiency was improved, which resulted from both the reduction in reversible resistance and the slow-down of fouling layer accumulate rate. This is the first time that the fouling behaviors of tanning wastewater ultrafiltration were comprehensively evaluated, thus providing crucial guidance for further scientific investigation and industrial application.

Advanced Oxidation Processes and Biotechnological Alternatives for the Treatment of Tannery Wastewater

The tannery industry is one of the economic sectors that contributes to the development of different countries. Globally, Europe and Asia are the main producers of this industry, although Latin America and Africa have been growing considerably in recent years. With this growth, the negative environmental impacts towards different ecosystem resources as a result of the discharges of recalcitrated pollutants, have led to different investigations to generate alternative solutions. Worldwide, different technologies have been studied to address this problem, biological and physicochemical processes have been widely studied, presenting drawbacks with some recalcitrant compounds. This review provides a context on the different existing technologies for the treatment of tannery wastewater, analyzing the physicochemical composition of this liquid waste, the impact it generates on human health and ecosystems and the advances in the different existing technologies, focusing on advanced oxidation processes and the use of microalgae. The coupling of advanced oxidation processes with biological processes, mainly microalgae, is seen as a viable biotechnological strategy, not only for the removal of pollutants, but also to obtain value-added products with potential use in the biorefining of the biomass.

Evaluation of the nanofluid-assisted desalination through solar stills in the last decade

Remote areas and poor communities are occasionally deprived of access to freshwater. It is, therefore, critical to providing a cheap and efficient desalination system that encourages the development of those communities and benefiting society at large. Solar stills are an affordable, direct method of water desalination, but its productivity is the critical challenge hindering its application. To ease this, research has focused on the role of nanofluids to improve heat transfer. Other works have focused on improving the design in consort with utilizing the nanofluids. This review reports and discusses the substantial role of nanofluids to enhance the productivity and energy utilization efficiency of the solar stills. Specifically, the mechanism of energy transfer between the nanoparticles and the base fluid. This includes both plasmonic and thermal effects. It is evident that nanofluid utilization in small fraction enhanced the thermal conductivity compared to base fluid alone. Alumina was found to be the most suitable nanoparticle used as nanofluid inside the solar stills due to its availability and lower cost. Still, other competitors such as carbon nanostructures need to be investigated as it provides higher enhancement of thermal conductivity. Also, several aspects of energy utilization enhancement have been discussed, including innovative application techniques. The challenges of such integrated systems are addressed as well.

Electrodialytic Processes: Market Overview, Membrane Phenomena, Recent Developments and Sustainable Strategies

In the context of preserving and improving human health, electrodialytic processes are very promising perspectives. Indeed, they allow the treatment of water, preservation of food products, production of bioactive compounds, extraction of organic acids, and recovery of energy from natural and wastewaters without major environmental impact. Hence, the aim of the present review is to give a global portrait of the most recent developments in electrodialytic membrane phenomena and their uses in sustainable strategies. It has appeared that new knowledge on pulsed electric fields, electroconvective vortices, overlimiting conditions and reversal modes as well as recent demonstrations of their applications are currently boosting the interest for electrodialytic processes. However, the hurdles are still high when dealing with scale-ups and real-life conditions. Furthermore, looking at the recent research trends, potable water and wastewater treatment as well as the production of value-added bioactive products in a circular economy will probably be the main applications to be developed and improved. All these processes, taking into account their principles and specificities, can be used for specific eco-efficient applications. However, to prove the sustainability of such process strategies, more life cycle assessments will be necessary to convince people of the merits of coupling these technologies.

Electrodialysis Applications in Wastewater Treatment for Environmental Protection and Resources Recovery: A Systematic Review on Progress and Perspectives

This paper presents a comprehensive review of studies on electrodialysis (ED) applications in wastewater treatment, outlining the current status and the future prospect. ED is a membrane process of separation under the action of an electric field, where ions are selectively transported across ion-exchange membranes. ED of both conventional or unconventional fashion has been tested to treat several waste or spent aqueous solutions, including effluents from various industrial processes, municipal wastewater or salt water treatment plants, and animal farms. Properties such as selectivity, high separation efficiency, and chemical-free treatment make ED methods adequate for desalination and other treatments with significant environmental benefits. ED technologies can be used in operations of concentration, dilution, desalination, regeneration, and valorisation to reclaim wastewater and recover water and/or other products, e.g., heavy metal ions, salts, acids/bases, nutrients, and organics, or electrical energy. Intense research activity has been directed towards developing enhanced or novel systems, showing that zero or minimal liquid discharge approaches can be techno-economically affordable and competitive. Despite few real plants having been installed, recent developments are opening new routes for the large-scale use of ED techniques in a plethora of treatment processes for wastewater.

Direct membrane filtration for wastewater treatment and resource recovery: A review

Direct membrane filtration has shown great potential in wastewater treatment and resource recovery in terms of its superior treated water quality, efficient nutrient recovery, and sustainable operation, especially under some scenarios where biological treatment is not feasible. This paper aims to give a comprehensive review of the state-of-the-art of direct membrane filtration processes (including pressure-driven, osmotic-driven, thermal-driven, and electrical-driven) in treating different types of wastewater for water reclamation and resource recovery. The factors influencing membrane performance and treatment efficiency in these direct membrane filtration processes are well illustrated, in which membrane fouling was identified as the main challenge. The strategies for improving direct membrane filtration performance, such as physical and chemical cleaning techniques and pretreatment of feed water, are highlighted. Towards scaling-up and long-term operation of direct membrane filtration for effective wastewater reclamation and resource recovery, the challenges are emphasized and the prospects are discussed.

A study on near zero liquid discharge approach for the treatment of reverse osmosis membrane concentrate by electrodialysis

A lab-scale electrodialysis (ED) which consisted of 11 pieces of cation-exchange membranes and 10 pieces of anion-exchange membranes was used to treat concentrated brine of Reverse osmosis (RO) membrane. The effect of operating parameters such as applied voltage, flowrate, and operating mode was investigated to measure the performance of a lab-scale ED. Three different voltages (5, 10, and 15 V) and flowrates (20, 30, and 40 L/h) were applied in order to optimize the operating conditions of the ED system. The maximum TDS removal efficiencies were 85%, 97%, and 98% for 5, 10, and 15 V, respectively. It was concluded that the desalination efficiencies were almost the same at flowrates values of 20, 30 and 40 L/h. The TDS concentration of the treated brine in the concentrate compartment rises to the highest value of 25,400 mg/L with desalination rate of 92.5% after five cycle operation. Moreover, the desalinated brine can be used as fresh water.

Wastewater from leather tanning and processing in Palestine: Characterization and management aspects

Leather manufacturing industry has major environmental impacts. Characterization of tannery's wastewater (WW) is a key step in the management of wastewater released from various processes. This study presents some physicochemical characteristics measured in wastewater. It compares the pollution loads released from both goat and cow hides processing. The main pollution characteristics of wastewater released from two local tanneries were determined experimentally, through analyzing real samples of industrial discharges. These include chemical oxygen demand (COD), total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), pH, and the concentrations of chloride, ammonia (NH₃) and chromium in both states, Cr (III) and Cr (VI). Characterization of such processes effluents assists in identifying waste generation rates and discharges, and then in recommending cleaner production options. The results shows that the amount of WW produced in the local Palestinian tanneries is much lower than tanneries worldwide, whereas it is more concentrated with pollutants. Liming process has the highest COD and the highest pH value, where tanning process releases WW highly concentrated with chromium. Real process measurements and mass balance calculations indicated that the chromium uptake efficiency is only 46.6%. Such a low efficiency indicates that cleaner production measures are essential in local tanneries.