Highly efficient magnetic chicken bone biochar for removal of tetracycline and fluorescent dye from wastewater: Two-stage adsorber analysis

Magnetic biochar serves as adsorbents and catalyst supports for the removal of antibiotics from wastewater: A review

Numerous antibiotics are being released into the natural environment through wastewater. As antibiotic usage increases annually, its detrimental impact on the environment is escalating. Addressing environmental sustainability and human health requires significant attention towards antibiotic removal. In recent years, magnetic biochar (MBC) has gained widespread application in water treatment due to its exceptional adsorption and catalytic degradation capabilities. Antibiotics such as sulfamethoxazole (SMX), tetracycline (TC), ciprofloxacin (CIP), and others commonly exhibit an adsorption capacity by MBC ranging from 5 mg/g to 900 mg/g. Moreover, MBC typically removes over 90% of these antibiotics within 60 min. The effectiveness of antibiotic removal is significantly influenced by various preparation and modification methods. Furthermore, the incorporation of magnetism enables the material to be recycled and reused multiple times, thereby reducing consumption costs. This article discusses recent studies on antibiotic removal using MBC. It has been observed that variations in the selection of raw material and preparation procedures significantly affect antibiotic removal, while the mechanisms involved in antibiotic removal remain ambiguous. Additionally, it has been noted that the removal process may lead to secondary pollution and high preparation costs. Therefore, this review comprehensively outlines the utilization of MBC in the removal of antibiotics from wastewater, including aspects such as modification, preparation, removal mechanism, and factors influencing removal, and providing recommendations for antibiotic development. The aim is to offer researchers a clear understanding to advance the field of MBC materials.

An assessment of nanotechnology-based interventions for cleaning up toxic heavy metal/metalloid-contaminated agroecosystems: Potentials and issues

Heavy metals (HMs) are among the most dangerous environmental variables for a variety of life forms, including crops. Accumulation of HMs in consumables and their subsequent transmission to the food web are serious concerns for scientific communities and policy makers. The function of essential plant cellular macromolecules is substantially hampered by HMs, which eventually have a detrimental effect on agricultural yield. Among these HMs, three were considered, i.e., arsenic, cadmium, and chromium, in this review, from agro-ecosystem perspective. Compared with conventional plant growth regulators, the use of nanoparticles (NPs) is a relatively recent, successful, and promising method among the many methods employed to address or alleviate the toxicity of HMs. The ability of NPs to reduce HM mobility in soil, reduce HM availability, enhance the ability of the apoplastic barrier to prevent HM translocation inside the plant, strengthen the plant's antioxidant system by significantly enhancing the activities of many enzymatic and nonenzymatic antioxidants, and increase the generation of specialized metabolites together support the effectiveness of NPs as stress relievers. In this review article, to assess the efficacy of various NP types in ameliorating HM toxicity in plants, we adopted a 'fusion approach', in which a machine learning-based analysis was used to systematically highlight current research trends based on which an extensive literature survey is planned. A holistic assessment of HMs and NMs was subsequently carried out to highlight the future course of action(s).

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

Inclusive study of peanut shells derived activated carbon as an adsorbent for removal of lead and methylene blue from water

Green and efficient agro-waste-based activated carbon has been prepared utilizing peanut shells for adsorptive elimination of an industrial dye, methylene blue, and lead from polluted water. The carbonaceous biomass obtained from peanut shells was chemically activated using either NaOH, ZnCl2, or steam and characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, and N2 adsorption and desorption studies. The adsorption process was optimal for methylene blue at alkaline pH, while pH 4.5 was optimal for Pb (II) adsorption. The adsorption takes place through pseudo-second-order kinetic, and the rate-governing step of the adsorption procedure are intraparticle diffusion and film diffusion. Furthermore, the thermodynamics of the adsorption process has been studied, and the obtained Gibbs free energy (ΔG°) values are negative (- 35.90 to - 43.59 kJ mol-1) indicating the spontaneous adsorption of the investigated pollutants on the prepared activated carbon. As per the correlation coefficient, the obtained results were best fit by the Langmuir isotherm with maximum adsorption capacity of 303.03 mg g-1 for methylene blue and 130.89 mg g-1 for Pb (II). The activated carbon successfully removed methylene blue and Pb (II) with %removal exceeding 95%. The mechanisms of interaction of Pb (II) with the activated carbon is a combination of electrostatic interaction and ion exchange, while methylene blue interacts with the activated carbon via π-π interaction, hydrogen bonds, and electrostatic interaction. Thus, the prepared activated carbon has been employed to decontaminate wastewater and groundwater samples. The developed agro-waste-based activated carbon is a promising, cost-efficient, green, and accessible tool for water remediation.

Synergistic interactions and reaction mechanisms of biochar surface functionalities in antibiotics removal from industrial wastewater

Biochar, a carbon-rich material with a unique surface chemistry (high abundance of surface functional groups, large surface area, and well-distributed), has shown great potential as a sustainable solution for industrial wastewater treatment as compared to conventional industrial wastewater treatment techniques demand substantial energy consumption and generate detrimental byproducts. This critical review emphasizes the surface functionalities formation and development in biochar to enhance its physiochemical properties, for utilization in antibiotics removal. Factors affecting the formation of functionalities, including carbonization processes, feedstock materials, operating parameters, and the influence of pre-post treatments, are thoroughly highlighted to understand the crucial role of factors influencing biochar properties for optimal antibiotics removal. Furthermore, the research explores the removal mechanisms and interactions of biochar-based surface functionalities, hydrogen bonding, encompassing electrostatic interactions, hydrophobic interactions, π-π interactions, and electron donor and acceptor interactions, to provide insights into the adsorption/removal behavior of antibiotics on biochar surfaces. The review also explains the mechanism of factors influencing the removal of antibiotics in industrial wastewater treatment, including particle size and pore structure, nature and types of surface functional groups, pH and surface charge, temperature, surface modification strategies, hydrophobicity/hydrophilicity, biochar dose, pollutant concentration, contact time, and the presence of coexisting ions and other substances. Finally, the study offers reusability and regeneration, challenges and future perspectives on the development of biochar-based adsorbents and their applications in addressing antibiotics. It concludes by summarizing the key findings and emphasizing the significance of biochar as a sustainable and effective solution for mitigating antibiotics contamination in industrial wastewater.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Impact of carbonization conditions and adsorbate nature on the performance of activated carbon in water treatment

The physical and chemical structure of activated carbon (AC) varies with the carbonization temperature, activation process and time. The texture and toughness of the starting raw material also determine the morphology of AC produced. The Brunauer-Emmet-Teller surface area (SBET) is small for AC produced at low temperatures but increases from 500 to 700 °C, and generally drops in activated carbons synthesized > 700 °C. Mild chemical activators and low activator concentrations tend to generate AC with high SBET compared to strong and concentrated oxidizing chemicals, acids and bases. Activated carbon from soft starting materials such as cereals and mushrooms have larger SBET approximately twice that of tough materials such as stem berks, shells and bones. The residual functional groups observed in AC vary widely with the starting material and tend to reduce under extreme carbonization temperatures and the use of highly concentrated chemical activators. Further, the adsorption capacity of AC shows dependency on the size of the adsorbate where large organic molecules such as methylene blue are highly adsorbed compared to relatively small adsorbates such as phenol and metal ions. Adsorption also varies with adsorbate concentration, temperature and other matrix parameters.

Adsorption of Safranin O Dye by Alginate/Pomegranate Peels Beads: Kinetic, Isotherm and Thermodynamic Studies

Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and pomegranate fruit peels (PP) were developed for the adsorption of Safranin O dye (SO) in aqueous solutions. The obtained Alg-PP beads were widely characterized. The effects of the contact time (0-180 min), initial concentration (10-300 mg/L), initial pH (2-10), adsorbent dosage (1-40 g/L) and the temperature (293-333 K) were investigated through batch tests. The data proved that the adsorption kinetics of SO reached equilibrium within 30 min and up to 180 min. The dye adsorption is concentration dependent while a slight effect of pH was observed. The adsorption data of SO onto synthesized beads follow the pseudo second-order model. The experimental data fitted very well to Langmuir model with correlation factor of 0.92 which demonstrated the favourable nature of adsorption. The maximum adsorption capacity of Alg-PP could reach 30.769 mg/g at 293 K. Calculation of Gibbs free energy and enthalpy indicated that adsorption of SO onto Alg-PP is spontaneous (negative ΔG) and endothermic (ΔH = 9.30 kJ/mol). Analysis of diffusion and mass transport phenomena were presented. The removal efficiency was found to be 88% at the first cycle and decreased to 71% at the end of the seventh cycle. The reported results revealed that the Alg-PP beads could be used as a novel natural adsorbent for the removal of high concentrated solutions of Safranin O which is a cationic dye from liquid affluents and as future perspective, it can be used to remove various pollutants from wastewater.

Ag2S Nanoparticles Supported on 3D Flower-Shaped Bi2WO6 Enhanced Visible Light Catalytic Degradation of Tetracycline

A three-dimensional flower-shaped Bi2WO6 has been prepared by a hydrothermal procedure without the addition of an auxiliary agent and under neutral conditions with ultrapure water serving as solvent, and the Ag2S-Bi2WO6 composite with weight ratios of 5, 10, and 15% was prepared by a hydrothermal method. The crystallinity, morphology, mode of binding, and optical properties of the Ag2S-Bi2WO6 composite were characterized, the results of which showed that the composite had excellent dispersion, crystallinity, and purity. The composite with a weight ratio of 10% had the best photocatalytic performance, and the degradation rate of tetracycline reached 95.51% within 120 min, an increase of 27.35% over Bi2WO6. In experiments, some focus was given to the effect of the initial solution pH and the concentrations of humic acid and inorganic anions on the degradation efficiency. Based on free radical capture experiments and the semiconductor theory, the main active substances and mechanisms in the optical catalytic reaction process were studied, and speculation was given concerning the degradation pathway for the target pollutants. This study has conceived novel methods for the development of dual semiconductor systems consisting of a Ag NP composite and in doing so has provided new approaches for the development and photocatalysis for water pollution control.

Alginate-based porous polyHIPE for removal of single and multi-dye mixtures: Competitive isotherm and molecular docking studies

A novel hydrophilic porous alginate-based polyHIPE (AGA) was synthesized via an oil-in-water emulsion templating approach. AGA was used as an adsorbent for removing methylene blue (MB) dye in single- and multi-dye systems. BET, SEM, FTIR, XRD, and TEM were used to characterize AGA to elucidate its morphology, composition and physicochemical properties. According to the results, 1.25 g/L AGA adsorbed 99 % of 10 mg/L MB in 3 h in a single-dye system. The removal efficiency decreased to 97.2 % in the presence of 10 mg/L Cu2+ ions and 40.2 % when the solution salinity increased to 70 %. In a single-dye system, the experimental data do not match well with the Freundlich isotherm, pseudo-first order, and the Elovich kinetic model, however, in a multi-dye system, it fit well with both extended Langmuir and the Sheindorf-Rebhun-Sheintuch. Notably, AGA removed 66.87 mg/g in a dye solution containing only MB, whereas 50.14-60.01 mg/g adsorption of MB was accomplished in a multiple-dye system. According to the molecular docking analysis, the dye removal process involved chemical bonds between the functional groups of AGA and the dye molecules, hydrogen bonds, hydrophobic and electrostatic interactions. The overall binding score of MB decreased from -26.9 kcal/mol in a single-dye system to -18.3 kcal/mol in a ternary system.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Synergistic removal of organic pollutants from water by CTF/BiVO4 heterojunction photocatalysts

Herein, a series of covalent triazine framework/bismuth vanadate (CTF/BiVO₄) heterojunction catalysts were prepared using the hydrothermal method. The mechanism of the CTF/BiVO₄ heterojunction photocatalyst in the system was examined to provide a theoretical basis for constructing a high-efficiency photocatalysis composite system for removing organic pollutants from water. Compared with CTF and BiVO₄ catalysts alone, composite materials have been shown to have significantly higher degradation efficiencies against organic pollutants in water. Moreover, the degradation effect was found to be optimal when the mass ratio of CTF to BiVO₄ was 1:1 (1-CTF/BiVO₄). On the basis of physicochemical characterization results, it was concluded that the effective construction of CTF/BiVO₄ composite photocatalyst material systems and the formation of type II heterojunction structures between CTF and BiVO₄ effectively promote the separation of photogenerated carriers and increase the interface charge transfer efficiency.

Biochar application for remediation of organic toxic pollutants in contaminated soils; An update

Bioremediation of organic contaminants has become a major environmental concern in the last few years, due to its bio-resistance and potential to accumulate in the environment. The use of diverse technologies, involving chemical and physical principles, and passive uptake utilizing sorption using ecofriendly substrates have drawn a lot of interest. Biochar has got attention mainly due to its simplicity of manufacturing, treatment, and disposal, as it is a less expensive and more efficient material, and has a lot of potential for the remediation of organic contaminants. This review highlighted the adverse impact of persistent organic pollutants on the environment and soil biota. The utilization of biochar to remediate soil and contaminated compounds i.e., pesticides, polycyclic aromatic hydrocarbons, antibiotics, and organic dyes has also been discussed. The soil application of biochar has a significant impact on the biodegradation, leaching, and sorption/desorption of organic contaminants. The sorption/desorption of organic contaminants is influenced by chemical composition and structure, porosity, surface area, pH, and elemental ratios, and surface functional groups of biochar. All the above biochar characteristics depend on the type of feedstock and pyrolysis conditions. However, the concentration and nature of organic pollutants significantly alters the sorption capability of biochar. Therefore, the physicochemical properties of biochar and soils/wastewater, and the nature of organic contaminants, should be evaluated before biochar application to soil and wastewater. Future initiatives, however, are needed to develop biochars with better adsorption capacity, and long-term sustainability for use in the xenobiotic/organic contaminant remediation strategy.

Magnetic-Transition-Metal Oxides Modified Pollen-Derived Porous Carbon for Enhanced Absorption Performance

In our work, the transition-metal-oxide precursor (TMO@BC, M = Fe, Co, Ni) has been loaded on the pollen carbon by the hydrothermal method and annealed at different temperatures to generate a composite material of metal oxide and pollen carbon in this study, which can effectively prevent agglomeration caused by a small size and magnetism. The XRD patterns of the samples showed that the as-synthesized metal oxides were γ-Fe₂O₃, CoO, and NiO. In the 20 mg/L methyl orange adsorption experiment, the adsorption amount of CoO@C at 500 ℃ reached 19.32 mg/g and the removal rate was 96.61%. Therefore, CoO@C was selected for the adsorption correlation-model-fitting analysis, which was in line with the secondary reaction. The pseudo-second-order kinetic model (R²: 0.9683-0.9964), the intraparticle diffusion model, and the Freundlich adsorption isotherm model indicated that the adsorption process was the result of both physical and chemical adsorptions, and the judgment was based on the electrostatic action. The adsorption and removal efficiency of ciprofloxacin (CIP) by changing the pH of the reaction was about 80%, so the electrostatic attraction worked, but not the main factor. Recovered by an external magnetic field, the three-time recycling efficiency was still maintained at more than 80%. This novel biomass-derived magnetic porous carbon material embedded with transition-metal-oxide nanoparticles is highly promising for many applications, especially in the field of environmental remediation.

Alternative activated/KOH adsorbent for phenol adsorption: experimental, industrial case study and mass transfer interpretation

Removal of phenol from wastewater is essential to achieve permitted concentrations according to the recommendations of USEPA. The adsorption capacity of phenol in activated adsorbent with KOH of Enterolobium contortisiliquum (TAC) was evaluated at different temperatures. The Langmuir isotherm represented the equilibrium data of this study. Thermodynamic process was endothermic, spontaneous, and reversible. The mass transfer parameters ranged from K_E 0.68 to 0.96 × 10^-3 (cm s^-1), Ds 8.95 to 14.35 × 10^-9 (cm² s^-1), and Dp 5.023 × 10^-8 (cm² s^-1). The PVSDM model represented the adsorption kinetics. Intraparticle diffusion limits the mass transfer process Biot > 100. The two-stage process minimized the total amount of TAC required to achieve the permitted specification of phenol concentration in wastewater from different industrial sectors. TAC showed significant performance in the removal of phenol from wastewater.

Adsorption performance of tetracycline by the biomass ash derived from the pyrolysis of FeCl3-activated municipal sludge without gas protection

The municipal sludge activated by FeCl3 solution was pyrolyzed at 500 °C without gas protection, and the pyrolysis products, named as biomass ash, could effectively adsorb tetracycline (TC) from aqueous solution. Different FeCl3 concentrations could directly affect the physicochemical properties of the biomass ash, so that the biomass ash as adsorbent showed different adsorption efficiency toward TC. The activation of FeCl3 increased the oxygen-containing functional groups and surface polarities of the biomass ash. When the concentration of FeCl3 solution was 0.5 mol/L, the biomass ash behaved the maximum specific surface area (37.74 m2/g) and the best adsorption efficiency. The pseudo-second-order kinetics model and the Freundlich multi-molecule model could fully explain the TC adsorption process by the biomass ash pyrolyzed from municipal sludge activated by FeCl3. Moreover, the adsorption mechanism was mainly attributed to the chemical adsorption.

Highly Efficient Degradation of Tetracycline Hydrochloride in Water by Oxygenation of Carboxymethyl Cellulose-Stabilized FeS Nanofluids

The transformation of organic pollutants by stabilized nano-FeS in oxic conditions is far less understood than in anoxic states. Herein, carboxymethyl cellulose-stabilized FeS (CMC-FeS) nanofluids are prepared at a CMC-to-FeS mass ratio of 1/2 and their performance of tetracycline hydrochloride (TC) degradation under oxic conditions was investigated. Here, we showed that TC could be efficiently removed by oxygenation of CMC-FeS nanofluids at neutral initial pH. We found that CMC-FeS dosages as low as 15 mg/L can achieve the TC removal efficiency as high as 99.1% at an initial TC concentration of 50 mg/L. Oxidative degradation plays a predominated role in TC removal (accounting for 58.0%), adsorption has the second importance (accounting for 37.0%), and reduction has minor impact (accounting for 4.1%) toward TC removal. Electron spin resonance assays, fluorescent detection using coumarin as a probe, and radical scavenging experiments confirm that hydroxy radicals (•OH), both in free and surface-bound forms, contribute to oxidation of TC. Humic acids brought detrimental effects on TC removal and therefore should be biologically degraded in advance. This work offers a facile and cost-effective solution to decontaminate TC in natural and engineered water bodies.

Cow Dung-Based Biochar Materials Prepared via Mixed Base and Its Application in the Removal of Organic Pollutants

Cow dung (CD) is a waste product of livestock production. Improper disposal of a large amount of CD will cause environmental pollution. In this work, three biochar materials based on CD (BMCD) were prepared by using three types of base, including KOH, NaOH, and mixed base (MB, a mixture of equal mass NaOH and KOH) as activators to investigate the different physicochemical properties of BMCDs (BMCD-K, BMCD-Na, and BMCD-MB). The objective was to verify the effectiveness of MB activation in the preparation of biochar materials. The results show that MB has an effect on the structural characteristics of BMCDs. In particular, the surface area and total pore volume, the specific surface area, and the total pore volume of BMCD-MB (4081.1 m² g⁻¹ and 3.0118 cm³ g⁻¹) are significantly larger than those of BMCD-K (1784.6 m² g⁻¹ and 1.1142 cm³ g⁻¹) and BMCD-Na (1446.1 m² g⁻¹ and 1.0788 cm³ g⁻¹). While synthetic dye rhodamine B (RhB) and antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the adsorption performances, the maximum adsorption capacities of BMCD-K, BMCD-NA and BMCD-MB were 951, 770, and 1241 mg g⁻¹ for RhB, 975, 1051, and 1105 mg g⁻¹ for TH, respectively, which were higher than those of most adsorbents. This study demonstrated that MB can be used as an effective activator for the preparation of biochar materials with enhanced performance.

Antibiotic bioremediation by new generation biochar: Recent updates

The evolving multidrug resistance in microbes with increasing antibiotic pollution is becoming a severe global crisis. Recent developments on antibiotic remediations by biochar are promising. Advancements in biochar engineering enhanced biochar remediation efficiency to another level through developing new interactions and bonding abilities with antibiotic pollutants. Especially chemical/metal-composite modification significantly increased catalysis of biochar. The review's main focus is to underline biochar efficiency for the abatement of emerging antibiotic pollutants. Moreover, to relate feedstock, production conditions, and engineering techniques with biochar properties. Also, modification strategies are reviewed to obtain biochar or their composites before examining improved remediation potential ranging from 20 to 552 mg g^-1 for various antibiotics. Biochar offers different interactions depending on the surface functionalities e.g., π-π stacking, electrostatic, H-bonding, etc. Biochar and related composites have also been reviewed for remarkable properties e.g., photocatalysis, adsorption, and oxidation processes. Furthermore, future research directions and opportunities for biochar research are discussed.

Efficient removal of antibiotic in single and binary mixture of nickel by electrocoagulation process: Hydrogen generation and cost analysis

In discharged water, antibiotics and heavy metals frequently coexist, forming stable and recalcitrant complexes. Environmental concerns about how to efficiently treat this type of pollution are growing. Using Fe and Al electrodes, electrocoagulation (EC) was applied to remove tetracycline (TC) as a single pollutant as well as TC-nickel ions in a binary mixture from water. The effects of critical variables and the TC-Ni molar ratio (1:1, 1:2, and 2:1) were studied. The Fe electrode achieved 99.3% TC removal after 60 min in a single pollutant system containing 15 mgL^-1 of TC, while the Al electrode achieved 99.8% removal in 20 min at optimal conditions. The EC process demonstrated excellent electrodegradation efficiency towards TC-Ni complexes. When the TC to Ni²⁺ ratio was 1:1 and 1:2, respectively, TC elimination was 100% in 10 min and 99.6% in 20 min. We noted that a sufficient amount of Ni²⁺ could increase TC decomposition by electrocatalysis. The amount of hydrogen gas produced after treatment of a 0.2 L TC solution alone is 22.2-13.99 mol m^-3, whereas it was 27.2-40.8 mol m^-3 in the TC-Ni binary mixture, which can generate more than 35% of the electrical energy needed to power the EC system. To evaluate the generated sludge, FTIR analysis was performed.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Removal of fluconazole from aqueous solution by magnetic biochar treated by ball milling: adsorption performance and mechanism

The problem of low adsorption capacity of pristine magnetic biochar for organic pollutants always occurs. It is of great significance to select a suitable method to improve the adsorption performance of magnetic biochar. In this study, magnetic biochar was treated by ball milling and tested for its fluconazole adsorption capacity. The maximum adsorption capacity of ball-milled magnetic biochar (BMBC) for fluconazole reached nearly 15.90 mg/g, which was approximately five times higher than that of pristine magnetic biochar (MBC). Fluconazole adsorption by BMBC was mainly attributed to π-π interactions, hydrogen bonding, and surface complexation with oxygen-containing functional groups. The enhancement in fluconazole adsorption by BMBC was attributed to an increase in oxygen-containing functional groups. Batch adsorption experiments also illustrated that BMBC could be successfully applied in a wide range of pH values. The high efficiency of fluconazole removal confirmed that ball milling was an effective strategy to enhance the adsorptive performance of magnetic biochar.

Removal of potentially toxic elements from contaminated soil and water using bone char compared to plant- and bone-derived biochars: A review

Conversion of hazardous waste materials to value-added products is of great interest from both agro-environmental and economic points of view. Bone char (BC) has been used for the removal of potentially toxic elements (PTEs) from contaminated water, however, its potential BC for the immobilization of PTEs in contaminated water and soil compared to bone (BBC)- and plant (PBC)-derived biochars has not been reviewed yet. This review presents an elaboration for the potentials of BC for the remediation of PTEs-contaminated water and soil in comparison with PBC and BBC. This work critically reviews the preparation and characterization of BC, BBC, and PBC and their PTEs removal efficiency from water and soils. The mechanisms of PTE removal by BC, BBC, and PBC are also discussed in relation to their physicochemical characteristics. The review demonstrates the key opportunities for using bone waste as feedstock for producing BC and BBC as promising low-cost and effective materials for the remediation of PTEs-contaminated water and soils and also elucidates the possible combinations of BC and BBC aiming to effectively immobilize PTEs in water and soils.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

A highly efficient technique to simultaneously remove acidic and basic dyes using magnetic ion-exchange microbeads

The purpose of this study was to examine the combination of magnetic anion-exchange microbeads (MAM) and magnetic cation-exchange microbeads (MCM) to remove crystal violet (CV; a basic dye) and acid green 9 (AG9; an acidic dye) from their individual and combined solutions. Adsorption kinetics and isotherms experiments were performed in batch mode. CV and AG9 displayed superior affinity towards MCM and MAM, respectively, and their combined solution was efficiently adsorbed by combining MCM and MAM. The pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion models well described the adsorption kinetic data, and the pseudo-second-order model appeared a better fit for the two-component CV/AG9 system. The better fit of the Langmuir isotherm for CV adsorption indicated that CV adsorption occurred on active sites with equal affinity in the monolayer. In contrast, AG9 adsorption onto the heterogeneous MAM surface appeared to be multilayered adsorption. The adsorption capacities of the two dyes decreased with the increase in the co-existing salt concentration and increased only slightly at the high salt level due to the salting-out effect. Moreover, these microbeads maintained most of their initial capacity during five reuse cycles, indicating the great potential of MCM and MAM to remove basic and acidic dyes in practical applications.

Hemp fibers modified with graphite oxide as green and efficient solution for water remediation: Application to methylene blue

In this paper, the use of hemp fibers modified with graphite oxide for the removal of methylene blue (MB) from aqueous solutions was investigated. Parameters such as contact time, pH, temperature, initial concentration of dye and ionic strength were varied and their effects on the adsorption recovery were evaluated. The adsorption process attained the equilibrium within 30 min while the adsorption capacity was found to increase with increasing contact time. The experimental data were fitted through a pseudo-second order model. Maximum adsorption capacity slightly increases with temperature changing from 54 mg/g to 58 mg/g at pH = 7.5, from 37 mg/g to 45 mg/g at pH = 3 and from 44 mg/g to 49 mg/g at pH = 12, by increasing the temperature from 20 °C to 80 °C indicating that the process is slightly endothermic (ΔH = 3.43 kJ/mol). The thermodynamic parameters were even calculated demonstrating that the process is spontaneous (ΔG ≈ -4.4 J/mol K and ΔS = 3.16 J/mol K)). Finally, a mathematical algorithm was applied to forecast the response surface model. A second order model was chosen to fit the experimental data and the statistical effect of the process parameters were estimated. A numerical optimization was even performed to individuate the optimal set of process parameters (pH = 9.25, T = 53.8 °C and C₀ = 13.2 mg/L) which maximizes the removal capacity. A possible adsorption mechanism was even presented. So, it was proved the efficiency of the adsorption of a novel, inexpensive and sustainable composite material obtained from agro-waste resources by performing reusability cycles.

Optimizing the two-stage adsorber of NaOH-activated coconut shell carbon for methylene blue removal

This work was aimed at optimizing the adsorbent mass and contact time and evaluating the performance of two-stage batch adsorber of NaOH-activated coconut shell carbon for methylene blue removal. To decrease the dye concentration from 1000 to 89.4 mg/L at any effluent volumes, the two-stage adsorber displays a small mass saving of 0.33% because of the high adsorbent affinity towards methylene blue at 1.80 L/mg. Meanwhile, the contact time can be minimized by 97.6% as opposed to that in one-stage adsorber. The sensitivity analysis of affinity on mass minimization shows a significant saving of 28.5% when the affinity is reduced to 0.01 L/mg. The response surface methodology was used to optimize the two-stage absorber for methylene blue removal, wherein the most significant parameter is the contact time.

Efficiency of iron modified Pyrus pyrifolia peels biochar as a novel adsorbent for methylene blue dye abatement from aqueous phase: equilibrium and kinetic studies

Herein, a magnetic biochar adsorbent based on Pyrus pyrifolia discarded peels impregnated with precursor FeCl_3·6H₂O was fabricated and probed as a low-cost adsorbent for toxic cationic dye methylene blue (MB). The textural characterization of Pyrus pyrifolia magnetic biochar (PMBC) obtained from BET analysis exhibited its mesoporous nature with S_BET of 133.960 m²/g. The physicochemical characteristics of PMBC were elucidated using XRD, FTIR, SEM-EDX and TEM techniques. The impregnation of FeCl₃ has a significant impact on the microstructure of Pyrus pyrifolia based biochar which resulted in enhancement in adsorption efficiency of PMBC. The sorption parameters adsorbent dosage, time, initial MB concentration, and pH were thoroughly elucidated using a batch methodology which were found to be 0.8 g/L, 40 min, 90 mg/L and 6, respectively. Temkin and pseudo-second-order rate equation respectively appropriated the equilibrium data than the rest of the models. The maximum adsorption capacity determined by the Langmuir model was found to be 967.80 mg/g. The adsorbent exhibited better regeneration up to 3 cycles validating its practical usage. The facile synthesis, economic, and environmentally benign characteristic of Pyrus pyrifolia magnetic biochar corroborated it as a highly efficient adsorbent to sequester MB from an aqueous phase.

Designing Phenyl Porous Organic Polymers with High-Efficiency Tetracycline Adsorption Capacity and Wide pH Adaptability

Adsorption is an effective method to remove tetracycline (TC) from water, and developing efficient and environment-friendly adsorbents is an interesting topic. Herein, a series of novel phenyl porous organic polymers (P-POPs), synthesized by one-pot polymerization of different ratios of biphenyl and triphenylbenzene under AlCl₃ catalysis in CH₂Cl₂, was studied as a highly efficient adsorbent to removal of TC in water. Notably, the obtained POPs possessed abundant phenyl-containing functional groups, large specific surface area (1098 m²/g) with abundant microporous structure, high pore volume (0.579 cm³/g), favoring the removal of TC molecules. The maximum adsorption capacity (fitted by the Sips model) could achieve 581 mg/g, and the adsorption equilibrium is completed quickly within 1 h while obtaining excellent removal efficiency (98%). The TC adsorption process obeyed pseudo-second-order kinetics and fitted the Sips adsorption model well. Moreover, the adsorption of POPs to TC exhibited a wide range of pH (2–10) adaptability and outstanding reusability, which could be reused at least 5 times without significant changes in structure and efficiency. These results lay a theoretical foundation for the application of porous organic polymer adsorbents in antibiotic wastewater treatment.

Facile fabrication of robust, versatile, and recyclable biochar-graphene oxide composite monoliths for efficient removal of different contaminants in water

Water pollution produced by various contaminants is presently a major worldwide issue, posing a significant challenge to the development of novel materials for water treatment. Herein, robust and recyclable biochar-graphene oxide (BC-GO) composite monoliths were prepared utilizing lignin precursor as a carbon source in a one-pot hydrothermal process free of hazardous chemicals. Characterization results indicated the BC-GO composite monolith had abundant microchannels, nanopores, and a large specific surface area, thereby exhibiting a high adsorption capacity of 796.8 mg g^-1 to doxycycline in water, which was superior to conventional adsorbents. Furthermore, by annealing the BC-GO composite monolith, it could be transformed to hydrophobic (CA = 140°). The annealed BC-GO composite monolith retained a pronounced porous structure with a larger surface area and showed exceptional absorption capabilities of 55-130 g g^-1 toward various oils and solvents, which were higher/comparable to previously reported graphene-based materials. In addition, both BC-GO composite monoliths were highly stable and could be reused for a number of cycles of pollutants removal. The simplicity, environmental friendliness, and effectiveness of our approach to building BC-GO composite monoliths may pave the way for their future applications in the field of water purification.

Magnetic biochar derived from rice straw and stainless steel pickling waste liquor for highly efficient adsorption of crystal violet

Reducing the preparation cost of magnetic biochar is necessary for its large-scale application as an adsorbent. In this study, stainless steel pickling waste liquor and rice straw were successfully applied to synthesize of magnetic biochar (SPWL-MBC). Several iron oxides adhered on the biochar matrix, mainly Fe₃O₄, Fe₂O₃ and FeO. SPWL-MBC exhibited superparamagnetism, and its specific surface area was 274.29 m²/g. The material was able to adsorb a model contaminant, crystal violet (CV), with a maximum adsorption capacity of approximately 111.48 mg/g. Adsorption mechanism analysis showed that iron oxides, π-π interaction, hydrogen bonding and electrostatic interaction were responsible for the adsorption of CV. The CV adsorption efficiency of SPWL-MBC remained 71.91% after three adsorption-regeneration cycles. These outcomes illustrate that the magnetic biochar prepared from stainless steel pickling waste liquor can effectively remove CV from wastewater.

Effects of sheep bone biochar on soil quality, maize growth, and fractionation and phytoavailability of Cd and Zn in a mining-contaminated soil

Biochar prepared from various feedstock materials has been utilized in recent years as a potential stabilizing agent for heavy metals in smelter-contaminated soils. However, the effectiveness of animal bone-derived biochar and its potential for the stabilization of contaminants remains unclear. In the present study, sheep bone-derived biochar (SB) was prepared at low (500 °C; SBL) and high temperatures (800 °C; SBH) and amended a smelter-contaminated soil at 2, 5, and 10% (w/w). The effects of SB on soil properties, bioavailable Zn and Cd and their geochemical fractions, bacterial community composition and activity, and the response of plant attributes (pigments and antioxidant activity) were assessed. Results showed that the SBH added at 10% (SBH₁₀) increased soil organic carbon, total nitrogen, and phosphorus, and also increased the oxidizable and residual Zn and Cd fractions at the expense of the bioavailable fractions. The SBH₁₀ lowered the Zn and Cd contents in maize roots (by 57 and 60%) and shoot (by 42 and 61%), respectively, compared to unamended control. Additionally, SBH₁₀ enhanced urease (98%) and phosphates (107%) activities, but reduced dehydrogenase (58%) and β-glucosidase (30%) activities. Regarding the effect of the pyrolysis temperature, SBH enhanced the activity of Acidobacteria, Bacteroidetes, Firmicutes, Nitrospirae, Verrucomicrobia, Chlorobi, and Microgenomates, but reduced Actinobacteria and Parcubacteria in comparison to SBL. However, only the SBL₁₀ reduced the Proteobacteria community (by 9%). In conclusion, SB immobilized Zn and Cd in smelter-affected soils, enhanced the bacterial abundance and microbial function (urease, phosphates), and improved plant growth. However, validation of the results, obtained from the pot experiment, under field conditions is suggested.

Efficient degradation of tetracycline hydrochloride by photocatalytic ozonation over Bi2WO6

Photocatalytic ozonation technique for wastewater treatment has received much attention for their efficient capability in the mineralization of persistent organic pollutants. In this study, nanostructured Bi₂WO₆ was prepared by hydrothermal method and applied in the photocatalytic ozonation process for tetracycline hydrochloride (TCH) degradation under simulated solar light irradiation. Bi₂WO₆ triggered an effective synergy between photocatalysis and ozonation, and it showed a good activity and adaptability in the degradation of organic compounds. Besides, the influence of experimental factors on the total organic carbon removal (including catalyst dosage, ozone concentration, initial pH, reaction temperature and coexisting ions) was also investigated comprehensively. Spin-trapping electron paramagnetic resonance measurements and quenching experiments demonstrated that O₂^-, OH, ¹O₂ and h⁺ contributed to TCH degradation. The possible degradation pathways of TCH were proposed by identifying the intermediates with liquid chromatography-mass spectroscopy.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Application of Magnetic Composites in Removal of Tetracycline through Adsorption and Advanced Oxidation Processes (AOPs): A Review

Water pollution induced by the tetracycline (TC) has caused global increasing attention owing to its extensive use, environmental persistence, and potential harm for human health. Adsorption and advanced oxidation processes (AOPs) have been promising techniques for TC removal due to ideal effectiveness and efficiency. Magnetic composites (MCs) which exploit the combined advantages of nano scale, alternative sources, easy preparation, and separation from wastewater are widely used for catalysis and adsorption. Herein, we intensively reviewed the available literature in order to provide comprehensive insight into the applications and mechanisms of MCs for removal of TC by adsorption and AOPs. The synthesis methods of MCs, the TC adsorption, and removal mechanisms are fully discussed. MCs serve as efficient adsorbents and photocatalysts with superior performance of photocatalytic performance in TC degradation. In addition, the TC can be effectively decomposed by the Fenton-based and SO4•− mediated oxidation under catalysis of the reported MCs with excellent catalytic performance. Based on the existing literature, we further discuss the challenge and future perspectives in MCs-based adsorption and AOPs in removing TC.

Visible-Light-Driven Bio-Templated Magnetic Copper Oxide Composite for Heterogeneous Photo-Fenton Degradation of Tetracycline

The development of a visible-light-driven, reusable, and long-lasting catalyst for the heterogeneous photo-Fenton process is critical for practical application in the treatment of contaminated water. This study focuses on synthesizing a visible-light-driven heterogenous bio-templated magnetic copper oxide composite (Fe3O4/CuO/C) by a two-step process of bio-templating and hydrothermal processes. The prepared composite was characterized by field emission-scanning electron microscope (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), electrical impedance spectroscopy (EIS), and vibrating sample magnetometer (VSM). The results reveal that the prepared composite retains the template’s (corn stalk’s) original porous morphology, and a substantial amount of CuO and Fe3O4 particles are loaded onto the surface of the template. The prepared Fe3O4/CuO/C composite was employed as a catalyst for heterogeneous photo-Fenton degradation of tetracycline (TC) irradiated by visible light. The prepared Fe3O4/CuO/C catalyst has high efficiency towards TC degradation within 60 min across a wide pH range irradiated by visible light, which is attributed to its readily available interfacial boundaries, which significantly improves the movement of photoexcited electrons across various components of the prepared composite. The influence of other parameters such as initial H2O2 concentration, initial concentration of TC, and catalyst dosages was also studied. In addition to high efficiency, the prepared catalyst’s performance was sustained after five cycles, and its recovery is aided by the use of an external magnetic field. This research paper highlights the development of a heterogeneous catalyst for the elimination of refractory organic compounds in wastewater.

Mechanism of cadmium removal from soil by silicate composite biochar and its recycling

Biochar added to the soil is generally difficult to separate. In order to solve the problem of separating biochar from soil, this paper applies a hydraulic silicate gel material to the preparation of biochar. Non-magnetic silicate bonded biochar (SBC) and magnetic silicate bonded biochar (MSBC) with hydraulic properties were prepared. The new silicate bonded biochar has good adsorption performance, separation and recovery characteristics. The findings are as follows: (1) after three times of soil remediation, the silicate bonded biochar still had good mechanical properties, and the compressive strength was not attenuated, remaining between 210 and 270 N. (2) After three times of SBC and MSBC remediation, total Cd in soil decreased by 29.33% and 31.82% respectively, and available Cd decreased by 60.82% and 62.74% respectively. (3) After three cycles, the recovery rates of SBC and MSBC both exceeded 94.88%, and the highest adsorption regeneration rates of SBC and MSBC reached 83.09% and 92.06%, respectively. (4) The Cd content of wheat after SBC and MSBC repair was reduced by 29.67-37.36% and 47.25-63.74%, respectively.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Magnetic porous biochar with nanostructure surface derived from penicillin fermentation dregs pyrolysis with K2FeO4 activation: Characterization and application in penicillin adsorption

Magnetic porous biochars (MC_HCl, MC_HAc) with nanostructure on surfaces were prepared from penicillin fermentation dregs by pyrolysis with K₂FeO₄ activation and used in penicillin adsorption. MC_HCl and MC_HAc had high BET surface areas of 672 and 735 m²/g, respectively; mainly be attributed to the activation of K₂FeO₄ as well as acid pickling. Saturation magnetizations of MC_HCl and MC_HAc were 75.29 and 42.45 emu/g, respectively; the magnetism was mainly derived from the Fe₃O₄ and Fe₃C in magnetic biochars. MC_HCl had nano sticks of ~ 80 nm and MC_HAc had petal-like slice of ~ 30 nm on surfaces. The maximum adsorption capacities of penicillin on MC_HCl and MC_HAc were 196 and 322 mg/g at 308 K, respectively. The adsorptions of penicillin on MC_HCl and MC_HAc were consistent with pseudo primary kinetics and the Langmuir adsorption isotherm model, and thermodynamic analysis indicated that the adsorption mechanism included physical and chemical adsorption.

Preparation of magnetic biochar and its application in catalytic degradation of organic pollutants: A review

In recent years, magnetic biochar (MBC) has been greatly concerned because of its magnetic separation characteristics, and has been successfully used as a catalyst in the catalytic degradation of organic pollutants. However, there is currently a lack of a more systematic summary of MBC preparation methods, and no detailed overview of the catalytic mechanism of MBC catalysts for the degradation of organic pollutants. Therefore, we carry out this work to fill the above gaps. At first, we summarize the raw materials, preparation methods, and types of MBC in detail, and emphasize the MBC prepared by iron-containing sludge. Then, the catalytic mechanisms of MBC in peroxydisulfate, peroxymonosulfate, Fenton-like, photocatalysis, and NaBH₄ systems are carefully summarized, highlighting the contribution of various parts of MBC in catalysis. The degradation efficiency of organic pollutants in the above systems is evaluated. Finally, the stability and reusability of MBC catalysts are evaluated. In conclusion, this review contributes a meager force to the future development of MBC.