Integrated perspectives on the use of bacterial endophytes in horizontal flow constructed wetlands for the treatment of liquid textile effluent: Phytoremediation advances in the field

Actas Pink-2B dye removal in biochar nanocomposites augmented vertical flow constructed wetland (VF-CWs)

Industries generate hazardous dye wastewater, posing significant threats to public health and the environment. Removing dyes before discharge is crucial. The ongoing study primarily focused on synthesizing, applying, and understanding the mechanism of green nano-biochar composites. These composites, including zinc oxide/biochar, copper oxide/biochar, magnesium oxide/biochar, and manganese oxide/biochar, are designed to effectively remove Actas Pink-2B (Direct Red-31) in conjunction with constructed wetlands. Constructed wetland maintained pH 6.0-7.9. At the 10th week, the copper oxide/biochar treatment demonstrated the highest removal efficiency of total suspended solids (72%), dissolved oxygen (7.2 mg/L), and total dissolved solids (79.90%), followed by other biochar composites. The maximum removal efficiency for chemical oxygen demand (COD) and color was observed at a retention time of 60 days. The electrical conductivity also followed the same order, with a decrease observed up to the 8th week before becoming constant. A comprehensive statistical analysis was conducted, encompassing various techniques including variance analysis, regression analysis, correlation analysis, and principal component analysis. The rate of color and COD removal followed a second-order and first-order kinetics, respectively. A significant negative relationship was observed between dissolved oxygen and COD. The study indicates that employing biochar composites in constructed wetlands improves textile dye removal efficiency.

Response strategies of stem/leaves endophyte communities to nano-plastics regulate growth performance of submerged macrophytes

Research on the toxicity effects of nano-plastics on submerged macrophytes has been increasing over the past several years. However, how the endophytic bacteria of submerged macrophytes respond to nano-plastics remains unknown, although they have been widely shown to help terrestrial plants cope with various environmental stressors. Here, a microcosm experiment was performed to unravel the effects of high concentration of nano-plastics (20 mg/L) on three submerged macrophyte (Vallisneria natans, Potamogeton maackianus, Myriophyllum spicatum) and their endophytic bacterial communities. Results indicated that nano-plastics induced antioxidative stress in plants, but significantly reduction in relative growth rate (RGR) only occurred in V. natans (from 0.0034 to -0.0029 day-1), accompanied by change in the stem/leaves endophyte community composition. Further analysis suggested nano-plastics caused a reduction in environmental nutrient availability and the proportion of positive interactions between endophyte communities (43%), resulting in the lowest RGR of V. natans. In contrast, endophytes may help P. maackianus and M. spicatum cope with nano-plastic stress by increasing the proportion of positive correlations among communities (70% and 75%), leaving their RGR unaffected. Collectively, our study elucidates the species-specific response strategies of submerged macrophyte-endophyte to nano-plastics, which helps to reveal the different phytoremediation potential of submerged macrophytes against nano-plastic pollution.

Structural insights, biocatalytic characteristics, and application prospects of lignin-modifying enzymes for sustainable biotechnology-A review

Lignin modifying enzymes (LMEs) have gained widespread recognition in depolymerization of lignin polymers by oxidative cleavage. LMEs are a robust class of biocatalysts that include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), laccase (LAC), and dye-decolorizing peroxidase (DyP). Members of the LMEs family act on phenolic, non-phenolic substrates and have been widely researched for valorization of lignin, oxidative cleavage of xenobiotics and phenolics. LMEs implementation in the biotechnological and industrial sectors has sparked significant attention, although its potential future applications remain underexploited. To understand the mechanism of LMEs in sustainable pollution mitigation, several studies have been undertaken to assess the feasibility of LMEs in correlating to diverse pollutants for binding and intermolecular interactions at the molecular level. However, further investigation is required to fully comprehend the underlying mechanism. In this review we presented the key structural and functional features of LMEs, including the computational aspects, as well as the advanced applications in biotechnology and industrial research. Furthermore, concluding remarks and a look ahead, the use of LMEs coupled with computational frameworks, built upon artificial intelligence (AI) and machine learning (ML), has been emphasized as a recent milestone in environmental research.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

Environmental pollution, toxicity profile, and physico-chemical and biotechnological approaches for treatment of textile wastewater

Textile industries discharges a huge quantity of unused synthetic dyes in wastewater leading to increased environmental pollution and pose a great risk to human health. Thus, a significant improvement in effluent quality is required before it is discharged into the environment. Although, several physicochemical methods have been practiced for the efficient color and dyes removal from textile effluents, these approaches have some drawbacks of greater use of expensive chemicals, low sensitivity, formation of excess sludge which also have secondary disposal problem. Thus, there is still a need for energy efficient, affordable, effective, and environmentally friendly treatment technologies. Bioremediation has been considered as a promising an upcoming active field of research for the treatment of unwanted color and target compounds from the contaminated environment. In order to efficient treatment of textile effluent, the main objective of the present study was to isolate and characterize the indigenous microbial isolates from textile industry effluents and sludge samples and investigate their dye removal and decolorization ability along with the influence of various process parameters on effluents decolorization that draining into the open environment.

Operational parameters optimization for remediation of crude oil-polluted water in floating treatment wetlands using response surface methodology

The application of floating treatment wetlands (FTWs) is an innovative nature-based solution for the remediation of polluted water. The rational improvement of water treatment via FTWs is typically based on multifactorial experiments which are labor-intensive and time-consuming. Here, we used the response surface methodology (RSM) for the optimization of FTW's operational parameters for the remediation of water polluted by crude oil. The central composite design (CCD) of RSM was used to generate the experimental layout for testing the effect of the variables hydrocarbon, nutrient, and surfactant concentrations, aeration, and retention time on the hydrocarbon removal in 50 different FTW test systems planted with the common reed, Phragmites australis. The results from these FTW were used to formulate a mathematical model in which the computational data strongly correlated with the experimental results. The operational parameters were further optimized via modeling prediction plus experimental validation in test FTW systems. In the FTW with optimized parameters, there was a 95% attenuation of the hydrocarbon concentration, which was very close to the 98% attenuation predicted by the model. The cost-effectiveness ratio showed a reduction of the treatment cost up to $0.048/liter of wastewater. The approach showed that RSM is a useful strategy for designing FTW experiments and optimizing operational parameters.

Constructed wetlands for textile wastewater remediation: A review on concept, pollutant removal mechanisms, and integrated technologies for efficiency enhancement

Textile industries are among the ecologically unsustainable industries that release voluminous wastewater threatening ecosystem health. The constructed wetlands (CWs) are low-cost eco-technological interventions for the management of industrial wastewaters. The CWs are self-sustaining remediation systems that do not require an external source of energy and encompass simple operational mechanisms including biological (bioremediation and phytoremediation), chemical, and physical processes for pollutant removal. This review idiosyncratically scrutinizes the recent advances and developments in CWs, and their types employed for textile wastewater treatment. The major focus is on mechanisms involved during the removal of contaminants from textile wastewater in CWs and factors affecting the performance of the system. The article also discusses the State-of-the-Art integrated technologies e.g., CW-MFCs/algal ponds/sponge iron coupled systems, for the performance and sustainability enhancement of CWs. All the important aspects together with the technology amalgamation are critically synthesized for establishing suitable strategies for CW-based textile wastewater treatment systems.

Treatment wetlands and phyto-technologies for remediation of winery effluent: Challenges and opportunities

The composition and concentration of contaminants present in winery wastewater fluctuate through space and time, presenting a challenge for traditional remediation methods. Bio-hydrogeochemical engineered systems, such as treatment wetlands, have been demonstrated to effectively reduce contaminant loads prior to disposal or reuse of the effluent. This review identifies and details the status quo and challenges associated with (i) the characteristics of winery wastewater, and the (ii) functional components, (iii) operational parameters, and (iv) performance of treatment wetlands for remediation of winery effluent. Potential solutions to challenges associated with these aspects are presented, based on the latest literature. A particular emphasis has been placed on the phytoremediation of winery wastewater, and the rationale for selection of plant species for niche bioremediatory roles. This is attributed to previously reported low-to-negative removal percentages of persistent contaminants, such as salts and heavy metals that may be present in winery wastewater. A case for the inclusion of selected terrestrial halophytes in treatment wetlands and in areas irrigated using winery effluent is discussed. These are plant species that have an elevated ability to accumulate, cross-tolerate and potentially remove a range of persistent contaminants from winery effluent via various phytotechnologies (e.g., phytodesalination).

Effect of light combination on the characteristics of dissolved organic matter and chemical forms of Cd in the rhizosphere of Arabidopsis thaliana involved in phytoremediation

Light, one of the most important natural resources for plant species, significantly influences the biomass yield and nutrient uptake capacity in plants. Light sources with different spectra combinations can impact the bioavailability, toxicity, and solubility of heavy metals in soils by altering the concentrations and fractionations of soil dissolved organic matter (DOM). A series of light irradiation treatments were performed to evaluate the influence of red, yellow, and blue lights on the characteristics of DOM in the rhizosphere soils of Arabidopsis thaliana. The results showed that monochromatic red light significantly raised the levels of DOM and proportions of hydrophilic fractionations in the rhizosphere of A. thaliana relative to the control, while monochromatic blue light had the opposite effect. Moreover, the proportions of hydrophobic acid, which can mobilize Cd effectively, also raised with increasing doses of red light, which stimulated Cd mobilization. The application of yellow light not only increased the levels of hydrophobic acid in monochromatic red light treatment but also decreased the proportion of hydrophobic fractions in monochromatic blue light treatment, partially weakening the negative impacts of pure blue light on soil Cd activation. Moreover, DOM from the combined red, yellow, and blue lights resulted in a significantly stronger Cd extraction efficiency than the other light irradiation treatments, consequently enhancing the Cd phytoextraction efficiency of A. thaliana. The findings of this study demonstrated that a suitable light combination could enhance the phytoremediation effect of A. thaliana by activating soil Cd, and this method can be extrapolated to the real field, where light irradiation can be easily applied and modulated.

Constructed wetlands as a sustainable technology for wastewater treatment with emphasis on chromium-rich tannery wastewater

Water scarcity is a major threat to agriculture and humans due to over abstraction of groundwater, rapid urbanization and improper use in industrial processes. Industrial consumption of water is lower than the abstraction rate, which ultimately produces large amounts of wastewater such as from tannery industry containing high concentration of chromium (Cr). Chromium-contaminated tannery industry wastewater is used for irrigation of food crops, resulting in food safety and public health issues globally. In contrast to conventional treatment technologies, constructed wetlands (CWs) are considered as an eco-friendly technique to treat various types of wastewaters, although their application and potential have not been discussed and elaborated for Cr treatment of tannery wastewater. This review briefly describes Cr occurrence, distribution and speciation in aquatic ecosystems. The significance of wetland plant species, microorganisms, various bedding media and adsorbents have been discussed with a particular emphasis on the removal and detoxification of Cr in CWs. Also, the efficiency of various types of CWs is elaborated for advancing our understanding on Cr removal efficiency and Cr partitioning in various compartments of the CWs. The review covers important aspects to use CWs for treatment of Cr-rich tannery wastewater that are key to meet UN's Sustainable Development Goals.

Removal of per- and poly-fluoroalkyl substances (PFASs) by wetlands: Prospects on plants, microbes and the interplay

Per- and polyfluoroalkyl substances (PFASs) represent a large family of synthetic organofluorine aliphatic compounds. They have been extensively produced since 1940s due to enormous applications as a surface-active agent, and water and oil repellent characteristics. PFASs are made to be non-biodegradable, therefore, many of them have been found in the environment albeit strict regulations have been in place since 2002. PFASs are extremely toxic compounds that can impart harm in both fauna and flora. Recent investigations have shown that wetlands might be useful for their removal from the environment as a passive and nature-based solution. To this end, understanding the role of plants, microbes, and their combined plant-microbe interplay is crucial because it could help design a sophisticated passive treatment wetland system. This review focuses on how these components (plants, microbe, substrate) can influence PFASs removal in wetlands under natural and controlled conditions. The information on underlying removal mechanisms is mostly retrieved from laboratory-based studies; however, pilot- and field-scale data are also presented to provide insights on their real-time performance. Briefly, a traditional wetland system works on the principles of phytouptake, bioaccumulation, and sorption, which are mainly due to the fact that PFASs are synthetic compounds that have very low reactivity in the environment. Nevertheless, recent investigations have also shown that Feammox process in wetlands can mineralize the PFASs; thus, opens new opportunities for PFASs degradation in terms of effective plant-microbe interplay in the wetlands. The choice of plants and bacterial species is however crucial, and the system efficiency relies on species-specific, sediment-specific and pollutant-specific principles. More research is encouraged to identify genetic elements and molecular mechanisms that can help us harness effective plant-microbe interplay in wetlands for the successful removal of PFASs from the environment.

Recent developments and applications of floating treatment wetlands for treating different source waters: a review

Most water bodies around the world suffer from pollution to varying degrees. Floating treatment wetlands (FTWs) are a simple and efficient ecological treatment technology and have been widely studied and applied as a sustainable solution for different source waters. Based on the analysis of abundant literature in the last ten years, this paper systematically reviews the history and the latest development of FTWs. Meanwhile, the treatment performance and pollutant removal mechanisms of FTWs on the natural water, stormwater, domestic wastewater, industrial wastewater, and agricultural runoff are analyzed. In particular, very interesting information is provided, such as water depth, water surface coverage, the ratio of dissolved to total phosphorous (DRP/TP), the ratio of nitrogen to phosphorous (N/P), BOD/COD ratio, and its effects on the efficiency and removal mechanisms of FTWs. This information will provide useful references and guidance for optimizing the design of FTW and pollutant treatment efficiency of different source waters. This paper also provides an objective review of the limitations of FTWs. Subsequently, the enhancements of FTW technology which are recognized to be effective, including aeration, adding functional fillers or obligate degrading bacteria, and construction of hybrid FTWs, are summarized and recommendations are made for further research.

Assessment of Casuarina glauca as biofiltration model of secondary treated urban wastewater: effect on growth performances and heavy metals tolerance

The use of fast-growing tree species, such as Casuarina glauca for wastewater treatment could improve the quality of wastewater and offer an ecological and sustainable system. A hydroponically experiment was conducted to evaluate C. glauca ability to remove heavy metals from secondary treated urban wastewater (SWW). The effect of the SWW on plant biomass, some physiological parameters, heavy metals (Cd, Pb, Ni and Zn) bioaccumulation and removal from wastewater was evaluated. After 28 days, wastewater treatment C. glauca showed high efficiency for the removal of pathogenic bacteria such as faecal coliforms and faecal streptococci from SWW. A significant reduction was found for electrical conductivity, biochemical oxygen demand, chemical oxygen demand and suspended solids with 31%, 92%, 83% and 31% respectively. Casuarina glauca plants were able to remove heavy metal ions Cd, Pb, Ni and Zn from SWW and the removal efficiency was 92%, 77%, 83% and 73%, respectively. Casuarina glauca plants accumulated concentrations of heavy metals (Cd, Pb, Ni and Zn) in their roots higher than the shoots. SWW had a remarkable effect on plant growth and photosynthetic capacity in C. glauca compared with plants grown in tap water (control). The results indicated that C. glauca can act as scavengers of heavy metal ions from polluted water and confirms their ability for wastewater treatment.

Application of floating treatment wetlands for stormwater runoff: A critical review of the recent developments with emphasis on heavy metals and nutrient removal

Floating treatment wetlands (FTWs) are increasingly gaining popularity due to a set of valuable features like wastewater remediation under varied conditions, ecosystem quality preservation, landscape conservation, and aesthetic benefits. FTW is a phyto-technology in which macrophytes grow on a floating raft with their roots in permanent contact with water and remove pollutants via several physicochemical-biological processes. FTW is highly capable of overcoming technical and operational challenges that come way in stormwater treatment due to the erratic nature of hydrologic and input pollutant loads because this innovative buoyant hydroponic design can move up and down with fluctuating water levels in the stormwater pond and can treat highly variable flows. Plants and biofilms attached to the roots hanging beneath the floating mat play a pivotal role in FTWs. The present review encompasses the concept of FTWs, their structural designs, relevance in stormwater management, and mechanism of plant uptake for pollutant removal. The role of FTWs to remove heavy metals and nutrients is also critically analyzed. Understanding hydraulics and other parameters of FTW is vital to effective design. Hence, the role of vegetation coverage, vegetation type, sorption media, aeration frequency, and intensity, and plant density to enhance system efficiency is also highlighted. Due to their operational flexibility and environmentally friendly working with no additional burden on existing urban land use, FTWs entice broad international interest and offer a coherent solution for stormwater management. MAIN FINDINGS: The review delivers state-of-the-art analysis of the current understanding of hydraulics and other parameters of FTWs, and associated mechanisms to enhance the treatment efficiency of FTWs for nutrients and heavy metals removal.

Electroactive bacterial community augmentation enhances the performance of a pilot scale constructed wetland microbial fuel cell for treatment of textile dye wastewater

This study evaluated the effect of bioaugmentation of a newly enriched electroactive bacterial community DC5 on the performance of a pilot scale sequential two-step Horizontal Sub-surface flow Constructed Wetland-Microbial Fuel Cell (HSCW-MFC) system treating textile dye wastewater. The system consisted of CW-MFC-1 planted with Fimbristylis ferruginea and CW-MFC-2 planted with consortium of Fimbristylis ferruginea and Elymus repens plant species. Before bioaugmentation, HSCW-MFC system showed 62 ± 2% Chemical Oxygen Demand (COD) and 90 ± 1.5% American Dye Manufacturer's Institute (ADMI) removal and 177.3 mW/m² maximum power density (CW-MFC-1). After bioaugmentation of DC5 into the HSCW-MFC, COD and ADMI removal was enhanced to 74.10 ± 1.75% and 97.32 ± 1.90% with maximum power density of 197.94 mW/m² (CW-MFC-1). The genera Exiguobacterium, Desulfovibrio and Macellibacteroides of DC5 were significantly enriched at the electrodes of HSCW-MFC after bioaugmentation. These results demonstrate that the performance of the CW-MFC treating textile dye wastewater can be improved by bioaugmentation of electroactive bacterial community.

Bioaugmentation of treatment wetlands - A review

Bioaugmentation in the form of artificial mycorrhization of plant roots and bacterial inoculation has been successfully implemented in several fields including soil remediation or activated sludge treatment. Likewise, bioaugmentation seems a promising approach to improve the functioning of treatment wetlands, considering that natural mycorrhization has been detected in treatment wetlands and that bacteria are the main driver of contaminant degradation processes. However, to date, full scale implementation seems to be rare. This review synthesizes the effects of bioaugmentation on different types of treatment wetlands, to a large extent performed on a microcosm (<0.5 m²) or mesocosm scale (0.51 to 5 m²). While inoculation with arbuscular mycorrhizal fungi tended to show a positive effect on the growth of some wetland plants (e.g. Phragmites australis), the mechanisms underlying such positive effects are not well understood and the effects of upscaling to full scale treatment wetlands remain unknown. Bacterial inoculation tended to promote plant growth and pollutant degradation, but longer term data is required.

Effects of chromium stress on the rhizosphere microbial community composition of Cyperus alternifolius

Wetland plants are often used as the main body of soil, and the rhizosphere is a hot spot migration and transformation. Response mechanism to rhizosphere microorganisms on chromium(Cr) stressing could help improve the phytoremediation system. Cyperus alternifolius(CA) is selected as the research object by Cr-stress treatments and uncontaminated treatments with different cultivated pattern, included sole cultivated pattern(CAI), two-cultivated pattern (CAII), three-cultivated pattern (CAIII), and the un-planted blank samples (CK). 16s rRNA gene sequencing and metagenomic sequencing are performed to measure rhizosphere microbial community. And Five common enzymes in rhizosphere soils were observed: β-1,4-glucosidase (BG), β-N-acetylglucosaminidase (NAG), β-1,4-xylosidase (BX), cellobiohydrolase (CBH) and Leucine amino peptidase (LAP) in the rhizosphere. The results show that Gammaproteobacteria, Actinobacteria, Alphaproteobacteria, Gemmatimonadetes, Deltaproteobacteria are top five (63.97%) of the total sequence number. Wetland plants enriched a large amount of soil Cr in themselves, and the rhizosphere microorganisms don't show significant difference in community structure after affecting. 10.48% variation of microbial community is caused by Cr-stress. Acidovorax showed a great potential for chromium resistance. BX involvement in tolerance processes indirectly affects microbial communities (P < 0.01), there is a strong linear relationship between enzyme activity and the plants accumulating Cr and microbial community within 15.58% variant. The material accumulation and microbial quantity of CAIII are relatively low, but high biodiversity remains after affecting. These results provide references for in-depth understanding of rhizosphere microbial response to heavy metal pollution in wetland phytoremediation and interaction between wetland plants and rhizosphere microorganisms.

Constructed wetland, an eco-technology for wastewater treatment: A review on types of wastewater treated and components of the technology (macrophyte, biolfilm and substrate)

Constructed wetland (CW) represents an efficient eco-technological conglomerate interweaving water security, energy possibility and environmental protection. In the context of wastewater treatment technologies requiring substantial efficiency at reduced cost, chemical input and low environmental impact, applications of CW is being demonstrated at laboratory and field level with reasonably high contaminant removal efficiency and ecological benefits. However, along with the scope of applications, role of individual wetland component has to be re-emphasized through related research interventions. Hence, this review distinctively explores the concerns for extracting maximum benefit of macrophyte (focusing on interface of pollutant removal, root radial oxygen loss, root iron plaque, endophyte-macrophyte assisted treatment in CW, and prospects of energy harvesting from macrophyte) and role of biofilm (effect on treatment efficiency, composition and factors affecting) in a CW. Another focus of the review is on recent advances and developments in alternative low-cost substrate materials (including conventional type, industrial by-products, organic waste, mineral based and hybrid type) and their effect on target pollutants. The remainder of this review is organized to discuss the concerns of CW with respect to wastewater type (municipal, industrial, agricultural and farm wastewater). Attempt is made to analyze the practical relevance and significance of these aspects incorporating all recent developments in the areas to help making informed decisions about future directions for research and development related to CW.

Impacts of root pruning and magnetized water irrigation on the phytoremediation efficiency of Celosia argentea

Pot experiments were conducted to evaluate the effects of magnetized water irrigation (100 mT) and root cutting (three pruning intensities) on phytoremediation efficiency of Celosia argentea. In the absence of magnetic field treatment, low root cutting intensity increased the dry weight of the below-ground and aerial parts of C. argentea. Moderate and severe cutting intensities decreased the biomass yield of the plant roots by 11.3% and 31.0%, and increased the dry weight of aerial parts by 75.9% and 27.6%, respectively, alleviating the detrimental effects of these pruning treatments on the plant roots. In the presence of magnetic field treatment, 10% and 25% of pruning treatments increased the dry weight of plant roots by 52.1% and 33.8%, and 33% pruning treatment decreased it by 14.1%. Under both irrigation treatments, low and moderate root cutting strategies did not affect the take up of Cd by the plant roots, while severe cutting decreased it significantly. Enzyme activities decreased with the increment of pruning intensity, and magnetic field can alleviate the negative impact, increasing the capacity of the root pruned species to scavenge the excessive ROS induced by the accumulated Cd. The results showed that root pruning enhanced the phytoremediation efficiency of C. argentea, and this effect was enhanced when combined with magnetized water irrigation.

Bacteria Associated with Echinodorus cordifolius and Lepironia articulata Enhance Nitrogen and Phosphorus Removal from Wastewater

Phytoremediation and bioremediation are eco-friendly methods of wastewater treatment that are widely used throughout the world to reduce anthropogenic water contamination. This study was conducted to assess the effectiveness of symbiotic bacteria in phytoremediation using two aquatic plants, Echinodorus cordifolius and Lepironia articulata, that were tested in sterilized and unsterilized groups. The results showed that unsterilized plants removed more phosphate, ammonium, nitrate and nitrite than the sterilized plants. In untreated and unsterilized E. cordifolius groups, the dominant bacterium was Calothrix (46.90 and 49.69%, respectively), which was higher than in the sterilized E. cordifolius group (38.88%). In untreated and unsterilized groups of L. articulata, Clostridium was a dominant bacterium. The proportion of Clostridium was much lower in the sterilized L. articulata group (1.31%) than in the untreated (13.71%) and unsterilized (49.02%) groups. Our results suggested that root-associated bacteria in E. cordifolius and L. articulata were effective in the removal of phosphorus and nitrogen from domestic wastewater.

Implementation of Floating Treatment Wetlands for Textile Wastewater Management: A Review

The textile industry is one of the most chemically intensive industries, and its wastewater is comprised of harmful dyes, pigments, dissolved/suspended solids, and heavy metals. The treatment of textile wastewater has become a necessary task before discharge into the environment. The textile effluent can be treated by conventional methods, however, the limitations of these techniques are high cost, incomplete removal, and production of concentrated sludge. This review illustrates recent knowledge about the application of floating treatment wetlands (FTWs) for remediation of textile wastewater. The FTWs system is a potential alternative technology for textile wastewater treatment. FTWs efficiently removed the dyes, pigments, organic matter, nutrients, heavy metals, and other pollutants from the textile effluent. Plants and bacteria are essential components of FTWs, which contribute to the pollutant removal process through their physical effects and metabolic process. Plants species with extensive roots structure and large biomass are recommended for vegetation on floating mats. The pollutant removal efficiency can be enhanced by the right selection of plants, managing plant coverage, improving aeration, and inoculation by specific bacterial strains. The proper installation and maintenance practices can further enhance the efficiency, sustainability, and aesthetic value of the FTWs. Further research is suggested to develop guidelines for the selection of right plants and bacterial strains for the efficient remediation of textile effluent by FTWs at large scales.

Cyperus laevigatus L. Enhances Diesel Oil Remediation in Synergism with Bacterial Inoculation in Floating Treatment Wetlands

Diesel oil is considered a very hazardous fuel due to its adverse effect on the aquatic ecosystem, so its remediation has become the focus of much attention. Taking this into consideration, the current study was conducted to explore the synergistic applications of both plant and bacteria for cleaning up of diesel oil contaminated water. We examined that the application of floating treatment wetlands (FTWs) is an economical and superlative choice for the treatment of diesel oil contaminated water. In this study, a pilot scale floating treatment wetlands system having diesel oil contaminated water (1% w/v), was adopted using Cyperus laevigatus L and a mixture of hydrocarbons degrading bacterial strains; viz., Acinetobacter sp.61KJ620863, Bacillus megaterium 65 KF478214, and Acinetobacter sp.82 KF478231. It was observed that consortium of hydrocarbons degrading bacteria improved the remediation of diesel oil in combination with Cyperus laevigatus L. Moreover, the performance of the FTWs was enhanced by colonization of bacterial strains in the root and shoot of Cyperus laevigatus L. Independently, the bacterial consortium and Cyperus laevigatus L exhibited 37.46% and 56.57% reduction in diesel oil, respectively, while 73.48% reduction in hydrocarbons was exhibited by the joint application of both plant and bacteria in FTWs. Furthermore, microbial inoculation improved the fresh biomass (11.62%), dry biomass (33.33%), and height (18.05%) of plants. Fish toxicity assay evaluated the effectiveness of FTWs by showing the extent of improvement in the water quality to a level that became safe for living organisms. The study therefore concluded that Cyperus laevigatus L augmented with hydrocarbons degrading bacterial consortium exhibited a remarkable ability to decontaminate the diesel oil from water and could enhance the FTWs performance.

Application of Floating Aquatic Plants in Phytoremediation of Heavy Metals Polluted Water: A Review

Heavy-metal (HM) pollution is considered a leading source of environmental contamination. Heavy-metal pollution in ground water poses a serious threat to human health and the aquatic ecosystem. Conventional treatment technologies to remove the pollutants from wastewater are usually costly, time-consuming, environmentally destructive, and mostly inefficient. Phytoremediation is a cost-effective green emerging technology with long-lasting applicability. The selection of plant species is the most significant aspect for successful phytoremediation. Aquatic plants hold steep efficiency for the removal of organic and inorganic pollutants. Water hyacinth (Eichhornia crassipes), water lettuce (Pistia stratiotes) and Duck weed (Lemna minor) along with some other aquatic plants are prominent metal accumulator plants for the remediation of heavy-metal polluted water. The phytoremediation potential of the aquatic plant can be further enhanced by the application of innovative approaches in phytoremediation. A summarizing review regarding the use of aquatic plants in phytoremediation is gathered in order to present the broad applicability of phytoremediation.

Can Constructed Wetlands be Wildlife Refuges? A Review of Their Potential Biodiversity Conservation Value

The degradation of wetland ecosystems is currently recognized as one of the main threats to global biodiversity. As a means of compensation, constructed wetlands (CWs), which are built to treat agricultural runoff and municipal wastewater, have become important for maintaining biodiversity. Here, we review studies on the relationships between CWs and their associated biodiversity published over the past three decades. In doing so, we provide an overview of how wildlife utilizes CWs, and the effects of biodiversity on pollutant transformation and removal. Beyond their primary aim (to purify various kinds of wastewater), CWs provide sub-optimal habitat for many species and, in turn, their purification function can be strongly influenced by the biodiversity that they support. However, there are some difficulties when using CWs to conserve biodiversity because some key characteristics of these engineered ecosystems vary from natural wetlands, including some fundamental ecological processes. Without proper management intervention, these features of CWs can promote biological invasion, as well as form an ‘ecological trap’ for native species. Management options, such as basin-wide integrative management and building in more natural wetland components, can partially offset these adverse impacts. Overall, the awareness of managers and the public regarding the potential value of CWs in biodiversity conservation remains superficial. More in-depth research, especially on how to balance different stakeholder values between wastewater managers and conservationists, is now required.

Enhancement of COD removal in constructed wetlands treating saline wastewater: Intertidal wetland sediment as a novel inoculation

This study investigated intertidal wetland sediment (IWS) as a novel inoculation source for saline wastewater treatment in constructed wetlands (CWs). Samples of IWS (5-20 cm subsurface sediment), which are highly productive and rich in halophilic and anaerobic bacteria, were collected from a high-salinity natural wetland and added to CW matrix. IWS-supplemented CW microcosms that are planted and unplanted Phragmites australis were investigated under salty (150 mM NaCl: PA+(S) and CT+(S)) and non-salty (0 mM NaCl: PA+ and CT+) conditions. The chemical oxygen demand (COD) removal potential of IWS-supplemented CWs was compared with that of conventional CWs without IWS (PA(S) and CT(S), PA, and CT). Results showed that the COD removal rate was higher in PA+(S) (51.80% ± 3.03%) and CT+(S) (29.20% ± 1.26%) than in PA(S) (27.40% ± 3.09%) and CT(S) (27.20% ± 3.06%) at 150 mM NaCl. The plants' chlorophyll content and antioxidant enzyme activity indicated that the addition of IWS enhanced the resistance of plants to salt. Microbial community analysis showed that the dominant microorganisms in PA+(S) and CT+(S), namely, Anaerolineae, Desulfobacterales, and Desulfuromonadales, enhanced the organic removal rates via anaerobic degradation. IWS-induced Dehalococcoides, which is a key participant in ethylene formation, improved the plants' stress tolerance. Several halophilic/tolerant microorganisms were also detected in the CW system with IWS. Thus, IWS is a promising inoculation source for CWs that treat saline wastewater.

Remediation of textile bleaching effluent by bacterial augmented horizontal flow and vertical flow constructed wetlands: A comparison at pilot scale

Fabric bleaching is one of the most widely used processes of the textile industry that also produces a significant amount of highly polluted wastewater. Previously, expensive and chemically extensive conventional remediation systems were used to treat bleaching effluent. Despite this, the potential of constructed wetlands (CWs) as a treatment system remains un-investigated. Furthermore, most research on the use of CWs for textile effluents are conducted at laboratory scale and therefore further research at field-scale is timely. This study compares the efficacy of bacterial augmented vertical flow constructed wetlands (VFCWs) and horizontal flow constructed wetlands (HFCWs) for the remediation of textile bleaching wastewater at pilot scale. To this end, CWs macrocosms of 1000 L water capacity were planted with Phragmites australis and inoculated with bacterial strains possessing pollutant degradation and plant growth-promoting traits. The results showed that both variants of CWs were effective in attenuating pollutants from the wastewater; however, the performance of HFCWs exceeded that of the VFCWs for almost every pollutant measure undertaken. For HFCWs, a significant reduction in COD (89%), BOD (91%), TOC (96%), and toxicity was achieved in a period of 72 h during the first month of operation. Bacterial inoculation in CWs further improved the system's performance and these bacteria also exhibited persistence in the rhizoplane (43%), root interior (56%) and shoot interior (29%) of P. australis. This study, therefore, suggests that the bacterial augmented HFCWs is a suitable approach for industrial scale textile bleach wastewater treatment.

Root Bacteria Recruited by Phragmites australis in Constructed Wetlands Have the Potential to Enhance Azo-Dye Phytodepuration

The microbiome associated with plants used in phytodepuration systems can boost plant growth and services, especially in ecosystems dealing with recalcitrant compounds, hardly removed via traditional wastewater (WW) treatments, such as azo-dyes used in textile industry. In this context, we aimed to study the cultivable microbiome selected by Phragmites australis plants in a Constructed Wetland (CW) in Morocco, in order to obtain candidate inoculants for the phytodepuration of azo-dye contaminated WW. A collection of 152 rhizospheric and endophytic bacteria was established. The strains were phylogenetically identified and characterized for traits of interest in the phytodepuration context. All strains showed Plant Growth Promotion potential in vitro and 67% of them significantly improved the growth of a model plant in vivo compared to the non bacterized control plants. Moreover, most of the isolates were able to grow in presence of several model micropollutants typically found in WW, indicating their potential use in phytodepuration of a wide spectrum of effluents. The six most promising strains of the collection were tested in CW microcosms alone or as consortium: the consortium and two single inocula demonstrated to significantly increase the removal of the model azo-dye Reactive Black 5 compared to the non bacterized controls.

Stability of Selected Hydrogen Bonded Semiconductors in Organic Electronic Devices

The electronics era is flourishing and morphing itself into Internet of Everything, IoE. At the same time, questions arise on the issue of electronic materials employed: especially their natural availability and low-cost fabrication, their functional stability in devices, and finally their desired biodegradation at the end of their life cycle. Hydrogen bonded pigments and natural dyes like indigo, anthraquinone and acridone are not only biodegradable and of bio-origin but also have functionality robustness and offer versatility in designing electronics and sensors components. With this Perspective, we intend to coalesce all the scattered reports on the above-mentioned classes of hydrogen bonded semiconductors, spanning across several disciplines and many active research groups. The article will comprise both published and unpublished results, on stability during aging, upon electrical, chemical and thermal stress, and will finish with an outlook section related to biological degradation and biological stability of selected hydrogen bonded molecules employed as semiconductors in organic electronic devices. We demonstrate that when the purity, the long-range order and the strength of chemical bonds, are considered, then the Hydrogen bonded organic semiconductors are the privileged class of materials having the potential to compete with inorganic semiconductors. As an experimental historical study of stability, we fabricated and characterized organic transistors from a material batch synthesized in 1932 and compared the results to a fresh material batch.

Enhanced remediation of bispyribac sodium by wheat (Triticum aestivum) and a bispyribac sodium degrading bacterial consortium (BDAM)

The use of plant-bacterial association is a promising approach for the enhanced remediation of pesticides. Generally, both rhizo- and endosphere bacteria assist their host plants to survive in the contaminated environment. In this work, we have studied the individual and combined effects of wheat (Triticum aestivum) and a previously optimized bispyribac sodium (BS) degrading bacterial consortium (BDAM) on the degradation of BS and plant biomass production. Results showed that the bacterial strains of the BDAM have successfully survived in the plant rhizo-as well as endosphere and enhanced degradation of BS and plant biomass. In soil spiked with 2 mg/kg and 5 mg/kg of BS and was planted and inoculated with BDAM (P_I) showed 100% degradation of BS both in rhizosphere soil and endosphere of the plant. However, during the same period (45 days) the degradation of BS was 96 and 90%, and 93 and 84% in inoculated but un-planted (I_UP) and planted but un-inoculated (P_UI) soils spiked with 2 and 5 mg/kg, respectively. Liquid chromatography-mass spectrometry (LC-MS) analysis of the treated samples showed novel degradation products of BS. Based on the results, we concluded that plant-bacterial association is an efficient tool for enhanced remediation of BS contaminated soil and herbicide free crop production.

Removal of pharmaceuticals and personal care products using constructed wetlands: effective plant-bacteria synergism may enhance degradation efficiency

Post-industrial era has witnessed significant advancements at unprecedented rates in the field of medicine and cosmetics, which has led to affluent use of pharmaceuticals and personal care products (PPCPs). However, this has exacerbated the influx of various pollutants in the environment affecting living organisms through multiple routes. Thousands of PPCPs of various classes-prescription and non-prescription drugs-are discharged directly into the environment. In this review, we have surveyed literature investigating plant-based remediation practices to remove PPCPs from the environment. Our specific aim is to highlight the importance of plant-bacteria interplay for sustainable remediation of PPCPs. The green technologies not only are successfully curbing organic pollutants but also have displayed certain limitations. For example, the presence of biologically active compounds within plant rhizosphere may affect plant growth and hence compromise the phytoremediation potential of constructed wetlands. To overcome these hindrances, combined use of plants and beneficial bacteria has been employed. The microbes (both rhizo- and endophytes) in this type of system not only degrade PPCPs directly but also accelerate plant growth by producing growth-promoting enzymes and hence remediation potential of constructed wetlands.

Floating treatment wetlands as biological buoyant filters for wastewater reclamation

Floating treatment wetlands (FTWs) are an innovative product of ecological engineering that can play a promising role in wastewater treatment. It provides low-cost, eco-friendly, and sustainable solutions for the treatment of wastewater, particularly in regions with economic constraints. Generally, FTWs comprise rooted plants that grow on the surface of water with their roots extending down into the pelagic zone rather than being embedded into the sediments. This drooping structure helps develop (1) a hydraulic flow between the root network and the bottom of the treatment system and (2) a large biologically active surface area for the physical entrapment (filtration) of contaminants, as well as their biochemical transformation and degradation. Furthermore, the rooted network allows proliferation of microorganisms that form biofilms and enhance pollutant degradation while promoting plant growth. The augmentation of bacteria in FTWs has been proven to be the most effective approach for reclamation of wastewater. This article discusses the operational parameters of FTWs for maximal remediation of wastewater and highlights the importance of plant-bacteria partnerships in a typical FTW system for enhanced cleanup of wastewater. We propose that this technology is preferable over other methods that require high energy, costs, and area to install or operate machinery.

Effect of irrigation with detergent-containing water on foxtail millet shoot biomass and ion accumulation

Water shortage leads farmers to use sewages for irrigation. Sewages contain a large amount of laundry detergent. In this study the impact of irrigation by contaminated water on shoot biomass and seed germination of foxtail millet (Setaria italica) was investigated. The research was conducted as laboratory and pot experiments. Iso-potentials (- 0.042, - 0.077, and - 0.415 MPa) of polyethylene glycol (PEG, water deficit treatment) and laundry detergent (contamination treatment) made the laboratory experiment treatments. The pot experiment included contamination factor (0, 0.1, 1, and 10 g L^-1 of laundry detergent) and deficit irrigation factor (irrigation interval of 1, 2, and 3 days). Results of this study showed that at the iso-potential, laundry detergent had more negative effect on seed germination traits when compared with PEG. There was no germination at - 0.415 MPa of laundry detergent. Both drought and contamination reduced dry forage yield, plant height, leaf number, leaf area, leaf dry and fresh weight, stem dry, and fresh weight. Detergent concentration of 10 g L^-1 with irrigation interval of 3 days had a forage yield reduction of 63% compared to control (laundry detergent concentration of 0 g L^-1 with irrigation interval of 1 day). Detergent concentration of 10 g L^-1 with irrigation interval of 1 day had a sodium increase of 1847% compared to control. Based on the results of this study, it is recommended not to irrigate foxtail millet farm by contaminated water with laundry detergent higher than 1 g L^-1.

Textile Wastewater Treatment for Water Reuse: A Case Study

The reduced natural waters and the large amount of wastewater produced by textile industry necessitate an effective water reuse treatment. In this study, a combined two-stage water reuse treatment was established to enhance the quality and recovery rate of reused water. The primary treatment incorporated a flocculation and sedimentation system, two sand filtration units, an ozonation unit, an ultrafiltration (UF) system, and a reverse osmosis (RO) system. The second treatment included an ozonation unit, a sand filtration unit, and UF and RO systems. The color removal rate increased with the increasing ozone dosage, and the relational expression between the ozone dosage and color removal rate was fitted. Ozonation greatly reduced the color by 92.59 and 97.27 times during the primary and second ozonation stages, respectively. RO had the highest removal rate. The combined processes showed good performance in water reuse treatment. The treated, reused water satisfied the reuse standard and surpassed the drinking water standard rates for chemical oxygen consumption (CODcr), color, NH3-N, hardness, Cl−, SO42−, turbidity, Fe3+, and Cu2+. The operating cost of reuse water treatment was approximately 0.44 USD·m−3.

Effects of CO2 application and endophytic bacterial inoculation on morphological properties, photosynthetic characteristics and cadmium uptake of two ecotypes of Sedum alfredii Hance

Plant uptake of cadmium (Cd) is affected by soil and environmental conditions. In this study, hydroponic experiments were conducted to investigate the effects of elevated CO₂ coupled with inoculated endophytic bacteria M002 on morphological properties, gas exchange, photosynthetic pigments, chlorophyll fluorescence, and Cd uptake of S. alfredii. The results showed that bio-fortification processes (elevated CO₂ and/or inoculated with endophytic bacteria) significantly (p < 0.05) promoted growth patterns, improved photosynthetic characteristics and increased Cd tolerance of both ecotypes of S. alfredii, as compared to normal conditions. Net photosynthetic rate (Pn) in intact leaves of hyperaccumulating ecotype (HE) and non-hyperaccumulating ecotype (NHE) were increased by 73.93 and 32.90%, respectively at the low Cd (2 μM), 84.41 and 57.65%, respectively at the high Cd level (10 μM). Superposition treatment increased Cd concentration in shoots and roots of HE, by 50.87 and 82.12%, respectively at the low Cd and 46.75 and 88.92%, respectively at the high Cd level. Besides, superposition treatment declined Cd transfer factor of NHE, by 0.85% at non-Cd rate, 17.22% at the low Cd and 22.26% at the high Cd level. These results indicate that elevated CO₂ coupled with endophytic bacterial inoculation may effectively improve phytoremediation efficiency of Cd-contaminated soils by hyperaccumulator, and alleviate Cd toxicity to non-hyperaccumulator ecotype of Sedum alfredii.

The use of biochar and crushed mortar in treatment wetlands to enhance the removal of nutrients from sewage

An experimental study was carried out using in pilot-scale constructed wetland systems, operated in parallel to treat raw sewage. Each system consisted of a vertical flow (VF) unit that was filled with biochar as the main media, followed by a horizontal flow (HF) unit filled with crushed cement mortar. Hydraulic loading (HL) ranged 340-680 mm/day was applied on the VF wetland units, where high total nitrogen (TN) mass removal rate (20-23 g N/m² d) was obtained, demonstrating that biochar media had a beneficial effect on the degradation of nitrogenous pollutants. Total phosphorus (TP) removal percentage (concentration based) was ≥ 86% in HF wetlands packed with mortar materials. In one system, the flow direction of the sewage was directed by the deployment of downflow pipes and vertical baffles, aiming to facilitate the formation of aerobic and anaerobic zones in the wetland matrices. The effects of such arrangement were analyzed by comparing pollutant removal efficiencies in the two systems. On average, 99, 96, 93, and 86 percentage removals were obtained for ammonia (NH₄-N), TN, biochemical oxygen demand (BOD), and TP, respectively, during the experiments. Biochar and crushed mortar proved to be a highly effective combination as media in subsurface flow constructed wetlands for wastewater treatment.